openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm/mach-kirkwood/board-dt.c

208 lines
5.3 KiB
C
Raw Normal View History

ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
/*
* Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
*
* arch/arm/mach-kirkwood/board-dt.c
*
ARM: kirkwood: fdt: facilitate new boards during fdt migration Move all dreamplug-specific code out of board-dt.c and into board-dreamplug.c. This way new boards that are added during the conversion to fdt don't clutter up board-dt.c. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-03-15 08:52:31 +08:00
* Flattened Device Tree board initialization
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_platform.h>
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
#include <linux/clk-provider.h>
ARM: kirkwood: add missing kexec.h include Fixes the following build error when CONFIG_KEXEC is enabled: CC arch/arm/mach-kirkwood/board-dt.o arch/arm/mach-kirkwood/board-dt.c: In function 'kirkwood_dt_init': arch/arm/mach-kirkwood/board-dt.c:52:2: error: 'kexec_reinit' undeclared (first use in this function) arch/arm/mach-kirkwood/board-dt.c:52:2: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Ian Campbell <ijc@hellion.org.uk> [v4, rebase onto recent Linus for repost] [v3, speak actual English in the commit message, thanks Sergei Shtylyov] [v2, using linux/kexec.h not asm/kexec.h] Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-04-29 21:40:42 +08:00
#include <linux/kexec.h>
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
#include <asm/mach/arch.h>
ARM: kirkwood: fdt: absorb kirkwood_init() We need to absorb kirkwood_init() into kirkwood_dt_init() so that as we convert drivers, we can remove the platform call, eg kirkwood_rtc_init(). This maintains compatibility with non-fdt configurations because they still call kirkwood_init() in common.c. As drivers are converted, we will reinstate the 'static' qualifier in common.c. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-03-01 01:39:08 +08:00
#include <asm/mach/map.h>
#include <mach/bridge-regs.h>
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
#include <linux/platform_data/usb-ehci-orion.h>
ARM: Orion: DT support for IRQ and GPIO Controllers Both IRQ and GPIO controllers can now be represented in DT. The IRQ controllers are setup first, and then the GPIO controllers. Interrupts for GPIO lines are placed directly after the main interrupts in the interrupt space. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Josh Coombs <josh.coombs@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-06-27 19:40:04 +08:00
#include <plat/irq.h>
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
#include <plat/common.h>
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
#include "common.h"
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
/*
* There are still devices that doesn't know about DT yet. Get clock
* gates here and add a clock lookup alias, so that old platform
* devices still work.
*/
static void __init kirkwood_legacy_clk_init(void)
{
struct device_node *np = of_find_compatible_node(
NULL, NULL, "marvell,kirkwood-gating-clock");
struct of_phandle_args clkspec;
ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels The ethernet controller used on kirkwood looses its MAC address register contents when the corresponding clock is gated. As soon as mv643xx_eth is built as module, the clock gets gated and when loading the module, the MAC address is gone. Proper DT support for the mv643xx_eth driver is expected soon, so we add a workaround to always enable ge0/ge1 clocks on kirkwood. This workaround is also already used on non-DT kirkwood kernels. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-31 04:29:58 +08:00
struct clk *clk;
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
clkspec.np = np;
clkspec.args_count = 1;
clkspec.args[0] = CGC_BIT_PEX0;
orion_clkdev_add("0", "pcie",
of_clk_get_from_provider(&clkspec));
clkspec.args[0] = CGC_BIT_PEX1;
orion_clkdev_add("1", "pcie",
of_clk_get_from_provider(&clkspec));
ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels The ethernet controller used on kirkwood looses its MAC address register contents when the corresponding clock is gated. As soon as mv643xx_eth is built as module, the clock gets gated and when loading the module, the MAC address is gone. Proper DT support for the mv643xx_eth driver is expected soon, so we add a workaround to always enable ge0/ge1 clocks on kirkwood. This workaround is also already used on non-DT kirkwood kernels. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-31 04:29:58 +08:00
clkspec.args[0] = CGC_BIT_SDIO;
orion_clkdev_add(NULL, "mvsdio",
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
of_clk_get_from_provider(&clkspec));
ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels The ethernet controller used on kirkwood looses its MAC address register contents when the corresponding clock is gated. As soon as mv643xx_eth is built as module, the clock gets gated and when loading the module, the MAC address is gone. Proper DT support for the mv643xx_eth driver is expected soon, so we add a workaround to always enable ge0/ge1 clocks on kirkwood. This workaround is also already used on non-DT kirkwood kernels. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-31 04:29:58 +08:00
/*
* The ethernet interfaces forget the MAC address assigned by
* u-boot if the clocks are turned off. Until proper DT support
* is available we always enable them for now.
*/
clkspec.args[0] = CGC_BIT_GE0;
clk = of_clk_get_from_provider(&clkspec);
orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
clk_prepare_enable(clk);
clkspec.args[0] = CGC_BIT_GE1;
clk = of_clk_get_from_provider(&clkspec);
orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
clk_prepare_enable(clk);
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
}
static void __init kirkwood_of_clk_init(void)
{
ARM: kirkwood: move DT boards to SoC-centric clock init SoC centric clock init for Kirkwood can be used by calling of_clk_init. Use it and get rid of mvebu_clocks_init. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-11 09:08:08 +08:00
of_clk_init(NULL);
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
kirkwood_legacy_clk_init();
}
ARM: kirkwood: use devicetree for orion-spi Populate the devices with auxdata to set the device names which are used by clkdev to lookup the clocks. Signed-off-by: Michael Walle <micheal@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- v2: Add interrupts properties, although not used.
2012-06-07 02:30:57 +08:00
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
static void __init kirkwood_dt_init(void)
{
ARM: kirkwood: fdt: absorb kirkwood_init() We need to absorb kirkwood_init() into kirkwood_dt_init() so that as we convert drivers, we can remove the platform call, eg kirkwood_rtc_init(). This maintains compatibility with non-fdt configurations because they still call kirkwood_init() in common.c. As drivers are converted, we will reinstate the 'static' qualifier in common.c. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-03-01 01:39:08 +08:00
pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
/*
* Disable propagation of mbus errors to the CPU local bus,
* as this causes mbus errors (which can occur for example
* for PCI aborts) to throw CPU aborts, which we're not set
* up to deal with.
*/
writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
arm: mach-kirkwood: convert to use mvebu-mbus driver This commit migrates the mach-kirkwood platforms to use the mvebu-mbus driver and therefore removes the Kirkwood-specific addr-map code. The kirkwood_init_early() function is now responsible for initializing the mvebu-mbus driver by calling mvebu_mbus_init(). The address decoding windows are now registered in the kirkwood_setup_wins() function. It is worth noting that the four PCIe address decoding windows will ultimately no longer have to be registered here: it will be done automatically by the PCIe driver once Kirkwood has been migrated to use the upcoming mvebu PCIe driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-22 00:59:16 +08:00
kirkwood_setup_wins();
ARM: kirkwood: fdt: absorb kirkwood_init() We need to absorb kirkwood_init() into kirkwood_dt_init() so that as we convert drivers, we can remove the platform call, eg kirkwood_rtc_init(). This maintains compatibility with non-fdt configurations because they still call kirkwood_init() in common.c. As drivers are converted, we will reinstate the 'static' qualifier in common.c. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-03-01 01:39:08 +08:00
kirkwood_l2_init();
arm: kirkwood: Instantiate cpufreq driver Register a platform driver structure for the cpufreq driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-27 18:07:23 +08:00
kirkwood_cpufreq_init();
ARM: Orion: Add clocks using the generic clk infrastructure. Add tclk as a fixed rate clock for all platforms. In addition, on kirkwood, add a gated clock for most of the clocks which can be gated. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> [mturquette@linaro.org: removed redundant CLKDEV_LOOKUP from Kconfig] [mturquette@linaro.org: removed redundant clk.h from mach-dove/common.c] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2011-12-15 15:15:07 +08:00
/* Setup root of clk tree */
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
kirkwood_of_clk_init();
ARM: kirkwood: fdt: absorb kirkwood_init() We need to absorb kirkwood_init() into kirkwood_dt_init() so that as we convert drivers, we can remove the platform call, eg kirkwood_rtc_init(). This maintains compatibility with non-fdt configurations because they still call kirkwood_init() in common.c. As drivers are converted, we will reinstate the 'static' qualifier in common.c. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-03-01 01:39:08 +08:00
cpuidle: kirkwood: Move out of mach directory Move the Kirkwood cpuidle driver out of arch/arm/mach-kirkwood and into drivers/cpuidle. Convert the driver into a platform driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-09 20:22:15 +08:00
kirkwood_cpuidle_init();
ARM: kirkwood: fdt: absorb kirkwood_init() We need to absorb kirkwood_init() into kirkwood_dt_init() so that as we convert drivers, we can remove the platform call, eg kirkwood_rtc_init(). This maintains compatibility with non-fdt configurations because they still call kirkwood_init() in common.c. As drivers are converted, we will reinstate the 'static' qualifier in common.c. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-03-01 01:39:08 +08:00
#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
#endif
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
if (of_machine_is_compatible("globalscale,dreamplug"))
dreamplug_init();
ARM: kirkwood: convert Guruplug Server Plus to use the device tree Add a device tree entry for the Guruplug Server Plus board. This port was based both on the work done on the dreamplug and the dockstar. It builds, boots and works on my Guruplug Server Plus. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-12-10 02:40:04 +08:00
if (of_machine_is_compatible("globalscale,guruplug"))
guruplug_dt_init();
ARM: Kirkwood: add DT support for Sheevaplug and Sheevaplug eSATA Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-14 05:19:01 +08:00
if (of_machine_is_compatible("globalscale,sheevaplug"))
sheevaplug_dt_init();
ARM: kirkwood: Basic support for DNS-320 and DNS-325 Add support for the DNS-320 and DNS-325. Describe as much as currently possible in the devicetree files, create a board-dnskw.c for everything else. Changes since last submission (V3) [Addressing comments by]:- * One MACH_DLINK_KIRKWOOD_DT for all dtb files [Grant Likely, Jason Cooper] * Drop brain-dead select "select CONFIG_MTD_OF_PARTS" [Grant Likely] * Don't add NAND support then throw it away immediately after [Grant Likely] * Describe purpose of MPP 41, 42 & 49 Changes since last submission (V2):- * Use IEEE-compliant "okay", rather than "ok" [Scott Wood] Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-04-18 18:06:40 +08:00
if (of_machine_is_compatible("dlink,dns-kirkwood"))
dnskw_init();
kirkwood: Add iconnect support Add support for Iomega Iconnect system. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-By: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-04-19 05:16:41 +08:00
if (of_machine_is_compatible("iom,iconnect"))
iconnect_init();
ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree Add support for the IB-NAS6210 and IB-NAS 6220. Describe as much as currently possible in the devicetree files, including the NAND partitions. Use the partition scheme of the original firmware by default. Create a board-ib62x0.c for everything else. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-05-01 05:55:17 +08:00
if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
ib62x0_init();
ARM: Kirkwood: Add basic device tree support for QNAP TS219. The two different variants of QNAP TS devices, varying by SoC, put the GPIO keys on different GPIO lines. Hence we need two different DT board descriptions, which share the same board-ts219.c file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net>
2012-05-12 20:57:59 +08:00
if (of_machine_is_compatible("qnap,ts219"))
qnap_dt_ts219_init();
ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar This add a DT compatible board specific setup for the Seagate FreeAgent Dockstar. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-08-15 04:43:41 +08:00
if (of_machine_is_compatible("seagate,dockstar"))
dockstar_dt_init();
ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net This patch supplies the necessary DTS and supporting files to boot up a Seagate GoFlex Net with 3.5.0-rc3. Signed-off-by: Joshua Coombs <josh.coombs@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-16 17:52:50 +08:00
if (of_machine_is_compatible("seagate,goflexnet"))
goflexnet_init();
ARM: kirkwood: Add LS-XHL and LS-CHLv2 support Add support for Buffalo Linkstation LS-XHL and LS-CHLv2 using the device tree where possible. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-17 13:25:55 +08:00
if (of_machine_is_compatible("buffalo,lsxl"))
lsxl_init();
ARM: Kirkwood: Iomega ix2-200 DT support Add support for the Iomega ix2-200. Led's and buttons working as of kernel 3.6-rc2 the 3 lines in the network interface do seem to be required as removing either causes the network card to not be able to reach the network (at least on my device). Product page: http://go.iomega.com/en/products/network-storage-desktop/storcenter-network-storage-solution/network-hard-drive-ix2-200-cloud/?partner=4735#tech_specsItem_tab Signed-off-by: Alan M Butler <alanbutty12@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-08-20 22:29:07 +08:00
if (of_machine_is_compatible("iom,ix2-200"))
iomega_ix2_200_init();
ARM: initial DTS support for km_kirkwood This is a first attempt to support the km_kirkwood reference design with a device tree. This km_kirkwood design is present in many Keymile products. It is based on the Marvell Bobcat SOC which integrates a Kirkwood CPU next to a big L2 Ethernet Switch. The Kirkwood in the SOC is very similar to the "normal" one, but there are a few differences. This initial support is minimal: the kernel can boot with network (ge0), serial port and NAND functional. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Cc: Holger Brunck <holger.brunck@keymile.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-04 17:55:02 +08:00
if (of_machine_is_compatible("keymile,km_kirkwood"))
km_kirkwood_init();
ARM: Kirkwood: DT board setup for CloudBox This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox is a low cost NAS based on the Network Space v2. Chipset list: - CPU MARVELL 88F6702 1Ghz - SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz - 1 Ethernet Gigabit port (PHY MARVELL 88E1318) - SPI flash, NOR 512KB - 1 push button - 2 LEDs (red and blue) There is no EEPROM and no USB ports embedded. Note that this board must not be confused with the Network Space Mini v2 which is embedded in a previous LaCie product also named CloudBox. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:28 +08:00
if (of_machine_is_compatible("lacie,cloudbox") ||
of_machine_is_compatible("lacie,inetspace_v2") ||
ARM: kirkwood: DT board setup for Network Space Mini v2 This patch adds DT board setup for the LaCie NAS Network Space Mini v2 (aka SafeBox). The hardware characteristics are very close to those of the Network Space Lite v2. The main difference are: - A GPIO fan which is only available on the NS2 Mini. - A single USB host port is wired on the NS2 Mini. The NS2 Lite provides an additional dual-mode USB port (host/device). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 18:09:06 +08:00
of_machine_is_compatible("lacie,netspace_lite_v2") ||
ARM: Kirkwood: DT board setup for CloudBox This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox is a low cost NAS based on the Network Space v2. Chipset list: - CPU MARVELL 88F6702 1Ghz - SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz - 1 Ethernet Gigabit port (PHY MARVELL 88E1318) - SPI flash, NOR 512KB - 1 push button - 2 LEDs (red and blue) There is no EEPROM and no USB ports embedded. Note that this board must not be confused with the Network Space Mini v2 which is embedded in a previous LaCie product also named CloudBox. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:28 +08:00
of_machine_is_compatible("lacie,netspace_max_v2") ||
of_machine_is_compatible("lacie,netspace_mini_v2") ||
of_machine_is_compatible("lacie,netspace_v2"))
ARM: kirkwood: DT board setup for Network Space v2 and parents This patch adds DT board setup for LaCie Network Space v2 and parents, based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2 (Max) and Internet Space v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 18:09:04 +08:00
ns2_init();
arm: kirkwood: convert db-88f6281/db-88f6282 to the Device Tree This commit converts the Marvell DB-88F6281/DB-88F6282 board to the Device Tree. In fact, the code was supporting two different boards: one with the 6281 SoC variant, and one with the 6282 SoC variant. The difference between the two being that the 6281 has one PCIe interface, and the 6282 has two PCIe interfaces. In order to handle that with the Device Tree, we create a 'kirkwood-db.dtsi' file that contains the definitions common to both boards, and 'kirkwood-db-88f6281.dts' and 'kirkwood-db-88f6282.dts' for the definitions specific to each board. This is similar to what is done for the QNAP TS219 Kirkwood platform. We have kept one single Kconfig option, just like it was before. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-15 21:37:01 +08:00
if (of_machine_is_compatible("marvell,db-88f6281-bp") ||
of_machine_is_compatible("marvell,db-88f6282-bp"))
db88f628x_init();
ARM: kirkwood: Add support for the MPL CEC4 Signed-off-by: Stefan Peter <s.peter@mpl.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-18 23:46:16 +08:00
if (of_machine_is_compatible("mpl,cec4"))
mplcec4_init();
ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT Add support for NETGEAR ReadyNAS Duo v2 (Hardware specs available here: http://natisbad.org/NAS/). Almost everything is supported via provided .dts. A board-readynas.c file is nonetheless required for device not only converted to DT (Gbit controller). Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Tested-By: Arnaud Ebalard <arno@natisbad.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-20 06:28:06 +08:00
if (of_machine_is_compatible("netgear,readynas-duo-v2"))
netgear_readynas_init();
ARM: kirkwood: Add Plat'Home OpenBlocks A6 support Add support for Plat'Home OpenBlocks A6 using the device tree where possible. This commit supports SATA, USB, ether and serial console. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-13 15:43:09 +08:00
if (of_machine_is_compatible("plathome,openblocks-a6"))
openblocks_a6_init();
ARM: Kirkwood: new board USI Topkick This is a new kirkwood box made by Universal Scientific Industrial, Inc. The product description is here: http://www.usish.com/english/products_topkick1281p2.php It is very similar to the dreamplug and other plug devices, with the exception that it has room for a 2.5" SATA HDD internally. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2012-10-22 10:15:35 +08:00
if (of_machine_is_compatible("usi,topkick"))
usi_topkick_init();
arm: kirkwood: use the default of match table mach-kirkwood/board-dt.c defines its own OF matching table, but in fact, it is the same to the default of_default_bus_match_table[] which is already used by mach-mvebu, mach-dove and mach-orion5x. This patch therefore makes mach-kirkwood use the same default OF matching table. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-15 22:04:59 +08:00
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
}
ARM: Kirkwood: checkpatch cleanups Mostly printk to pr_{err|info} changes and a few strings split over multiple lines are combined. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-20 19:23:16 +08:00
static const char * const kirkwood_dt_board_compat[] = {
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
"globalscale,dreamplug",
ARM: kirkwood: convert Guruplug Server Plus to use the device tree Add a device tree entry for the Guruplug Server Plus board. This port was based both on the work done on the dreamplug and the dockstar. It builds, boots and works on my Guruplug Server Plus. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-12-10 02:40:04 +08:00
"globalscale,guruplug",
ARM: Kirkwood: add DT support for Sheevaplug and Sheevaplug eSATA Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-14 05:19:01 +08:00
"globalscale,sheevaplug",
ARM: kirkwood: Basic support for DNS-320 and DNS-325 Add support for the DNS-320 and DNS-325. Describe as much as currently possible in the devicetree files, create a board-dnskw.c for everything else. Changes since last submission (V3) [Addressing comments by]:- * One MACH_DLINK_KIRKWOOD_DT for all dtb files [Grant Likely, Jason Cooper] * Drop brain-dead select "select CONFIG_MTD_OF_PARTS" [Grant Likely] * Don't add NAND support then throw it away immediately after [Grant Likely] * Describe purpose of MPP 41, 42 & 49 Changes since last submission (V2):- * Use IEEE-compliant "okay", rather than "ok" [Scott Wood] Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-04-18 18:06:40 +08:00
"dlink,dns-320",
"dlink,dns-325",
kirkwood: Add iconnect support Add support for Iomega Iconnect system. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-By: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-04-19 05:16:41 +08:00
"iom,iconnect",
ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree Add support for the IB-NAS6210 and IB-NAS 6220. Describe as much as currently possible in the devicetree files, including the NAND partitions. Use the partition scheme of the original firmware by default. Create a board-ib62x0.c for everything else. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-05-01 05:55:17 +08:00
"raidsonic,ib-nas62x0",
ARM: Kirkwood: Add basic device tree support for QNAP TS219. The two different variants of QNAP TS devices, varying by SoC, put the GPIO keys on different GPIO lines. Hence we need two different DT board descriptions, which share the same board-ts219.c file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net>
2012-05-12 20:57:59 +08:00
"qnap,ts219",
ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar This add a DT compatible board specific setup for the Seagate FreeAgent Dockstar. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-08-15 04:43:41 +08:00
"seagate,dockstar",
ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net This patch supplies the necessary DTS and supporting files to boot up a Seagate GoFlex Net with 3.5.0-rc3. Signed-off-by: Joshua Coombs <josh.coombs@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-16 17:52:50 +08:00
"seagate,goflexnet",
ARM: kirkwood: Add LS-XHL and LS-CHLv2 support Add support for Buffalo Linkstation LS-XHL and LS-CHLv2 using the device tree where possible. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-17 13:25:55 +08:00
"buffalo,lsxl",
ARM: Kirkwood: Iomega ix2-200 DT support Add support for the Iomega ix2-200. Led's and buttons working as of kernel 3.6-rc2 the 3 lines in the network interface do seem to be required as removing either causes the network card to not be able to reach the network (at least on my device). Product page: http://go.iomega.com/en/products/network-storage-desktop/storcenter-network-storage-solution/network-hard-drive-ix2-200-cloud/?partner=4735#tech_specsItem_tab Signed-off-by: Alan M Butler <alanbutty12@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-08-20 22:29:07 +08:00
"iom,ix2-200",
ARM: initial DTS support for km_kirkwood This is a first attempt to support the km_kirkwood reference design with a device tree. This km_kirkwood design is present in many Keymile products. It is based on the Marvell Bobcat SOC which integrates a Kirkwood CPU next to a big L2 Ethernet Switch. The Kirkwood in the SOC is very similar to the "normal" one, but there are a few differences. This initial support is minimal: the kernel can boot with network (ge0), serial port and NAND functional. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Cc: Holger Brunck <holger.brunck@keymile.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-04 17:55:02 +08:00
"keymile,km_kirkwood",
ARM: Kirkwood: DT board setup for CloudBox This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox is a low cost NAS based on the Network Space v2. Chipset list: - CPU MARVELL 88F6702 1Ghz - SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz - 1 Ethernet Gigabit port (PHY MARVELL 88E1318) - SPI flash, NOR 512KB - 1 push button - 2 LEDs (red and blue) There is no EEPROM and no USB ports embedded. Note that this board must not be confused with the Network Space Mini v2 which is embedded in a previous LaCie product also named CloudBox. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:28 +08:00
"lacie,cloudbox",
ARM: kirkwood: DT board setup for Network Space v2 and parents This patch adds DT board setup for LaCie Network Space v2 and parents, based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2 (Max) and Internet Space v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 18:09:04 +08:00
"lacie,inetspace_v2",
ARM: kirkwood: DT board setup for Network Space Lite v2 This patch adds DT board setup for the LaCie NAS Network Space Lite v2. This board is derived from the Network Space v2 and a lot of hardware characteristics are shared. - CPU: Marvell 88F6192 800Mhz - SDRAM memory: 128MB DDR2 200Mhz - 1 SATA port: internal - Gigabit ethernet: PHY Marvell 88E1318 - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports: host and host/device - 1 push button - 1 SATA LED (bi-color, blue and red) Note that the SATA LED is not compatible with the driver leds-ns2. The LED behaviour ("on", "off" or "SATA activity blink") is controlled via a single MPP (21). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 18:09:05 +08:00
"lacie,netspace_lite_v2",
ARM: Kirkwood: DT board setup for CloudBox This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox is a low cost NAS based on the Network Space v2. Chipset list: - CPU MARVELL 88F6702 1Ghz - SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz - 1 Ethernet Gigabit port (PHY MARVELL 88E1318) - SPI flash, NOR 512KB - 1 push button - 2 LEDs (red and blue) There is no EEPROM and no USB ports embedded. Note that this board must not be confused with the Network Space Mini v2 which is embedded in a previous LaCie product also named CloudBox. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:28 +08:00
"lacie,netspace_max_v2",
ARM: kirkwood: DT board setup for Network Space Mini v2 This patch adds DT board setup for the LaCie NAS Network Space Mini v2 (aka SafeBox). The hardware characteristics are very close to those of the Network Space Lite v2. The main difference are: - A GPIO fan which is only available on the NS2 Mini. - A single USB host port is wired on the NS2 Mini. The NS2 Lite provides an additional dual-mode USB port (host/device). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 18:09:06 +08:00
"lacie,netspace_mini_v2",
ARM: Kirkwood: DT board setup for CloudBox This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox is a low cost NAS based on the Network Space v2. Chipset list: - CPU MARVELL 88F6702 1Ghz - SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz - 1 Ethernet Gigabit port (PHY MARVELL 88E1318) - SPI flash, NOR 512KB - 1 push button - 2 LEDs (red and blue) There is no EEPROM and no USB ports embedded. Note that this board must not be confused with the Network Space Mini v2 which is embedded in a previous LaCie product also named CloudBox. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:28 +08:00
"lacie,netspace_v2",
arm: kirkwood: convert db-88f6281/db-88f6282 to the Device Tree This commit converts the Marvell DB-88F6281/DB-88F6282 board to the Device Tree. In fact, the code was supporting two different boards: one with the 6281 SoC variant, and one with the 6282 SoC variant. The difference between the two being that the 6281 has one PCIe interface, and the 6282 has two PCIe interfaces. In order to handle that with the Device Tree, we create a 'kirkwood-db.dtsi' file that contains the definitions common to both boards, and 'kirkwood-db-88f6281.dts' and 'kirkwood-db-88f6282.dts' for the definitions specific to each board. This is similar to what is done for the QNAP TS219 Kirkwood platform. We have kept one single Kconfig option, just like it was before. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-15 21:37:01 +08:00
"marvell,db-88f6281-bp",
"marvell,db-88f6282-bp",
ARM: kirkwood: Add support for the MPL CEC4 Signed-off-by: Stefan Peter <s.peter@mpl.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-18 23:46:16 +08:00
"mpl,cec4",
ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT Add support for NETGEAR ReadyNAS Duo v2 (Hardware specs available here: http://natisbad.org/NAS/). Almost everything is supported via provided .dts. A board-readynas.c file is nonetheless required for device not only converted to DT (Gbit controller). Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Tested-By: Arnaud Ebalard <arno@natisbad.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-20 06:28:06 +08:00
"netgear,readynas-duo-v2",
ARM: kirkwood: Add Plat'Home OpenBlocks A6 support Add support for Plat'Home OpenBlocks A6 using the device tree where possible. This commit supports SATA, USB, ether and serial console. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-13 15:43:09 +08:00
"plathome,openblocks-a6",
ARM: Kirkwood: new board USI Topkick This is a new kirkwood box made by Universal Scientific Industrial, Inc. The product description is here: http://www.usish.com/english/products_topkick1281p2.php It is very similar to the dreamplug and other plug devices, with the exception that it has room for a 2.5" SATA HDD internally. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2012-10-22 10:15:35 +08:00
"usi,topkick",
arm: kirkwood: add support for ZyXEL NSA310 Hello, Andrew > > +#define NSA310_GPIO_LED_ESATA_GREEN 12 > > <..> > > +#define NSA310_GPIO_POWER_OFF 48 > > It looks like most of these are not used. Please remove them. True. Fixed. > > +static struct mtd_partition nsa310_mtd_parts[] = { > > + { > > + .name = "uboot", > > + .offset = 0, > > + .size = 0x100000, > > + .mask_flags = MTD_WRITEABLE, > > + }, { > > <..> > You should be able to put all that into DT. Take a look at Correct. I did the conversion and tested that the partitions can be read with dd and produce exactly the same data before and after conversion. So, the partition offsets at least should be fine. > > +static struct i2c_board_info __initdata nsa310_i2c_info[] = { > > + { I2C_BOARD_INFO("adt7476", 0x2e) }, > > +}; > > You can also do this in DT as well. kirkwood-ts219.dtsi has > > i2c@11000 { > status = "okay"; > clock-frequency = <400000>; Ok, I did convert the i2c definition to use the devicetree. The adt7476 device itself is not at reach of device tree, AFAIK and requires more work at there? Thanks for your valuable comments. Following is a new patch that should address the problems and mistakes you pointed and also some of the pointed by Jason Cooper. The nand and i2c are now defined at DT and I also removed the pointless defines and ARM_APPENDED_DTB. It is based against the Linus' official 3.6 version. Best regards, Tero Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-26 23:56:16 +08:00
"zyxel,nsa310",
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
NULL
};
DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
ARM: Orion: DT support for IRQ and GPIO Controllers Both IRQ and GPIO controllers can now be represented in DT. The IRQ controllers are setup first, and then the GPIO controllers. Interrupts for GPIO lines are placed directly after the main interrupts in the interrupt space. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Josh Coombs <josh.coombs@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-06-27 19:40:04 +08:00
.init_irq = orion_dt_init_irq,
ARM: delete struct sys_timer Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-09 03:40:59 +08:00
.init_time = kirkwood_timer_init,
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
.init_machine = kirkwood_dt_init,
.restart = kirkwood_restart,
.dt_compat = kirkwood_dt_board_compat,
MACHINE_END