linux/sound/soc/qcom/lpass-cpu.c

656 lines
17 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2010-2011,2013-2015 The Linux Foundation. All rights reserved.
*
* lpass-cpu.c -- ALSA SoC CPU DAI driver for QTi LPASS
*/
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/regmap.h>
#include <sound/soc.h>
#include <sound/soc-dai.h>
#include "lpass-lpaif-reg.h"
#include "lpass.h"
ASoC: qcom: lpass-cpu: Make I2S SD lines configurable The LPASS hardware allows configuring the MI2S SD lines to use when playing/recording audio. However, at the moment the lpass-cpu driver has SD0 hard-coded for mono/stereo (or additional fixed SD lines for more channels). For weird reasons there seems to be hardware that uses one of the other SD lines for mono/stereo. For example, some Samsung devices use an external Speaker amplifier connected to Quaternary MI2S. For some reason, the SD line for audio playback was connected to SD1 rather than SD0. (I have no idea why...) At the moment, the lpass-cpu driver cannot be configured to work for the Speaker on these devices. The q6afe driver already allows configuring the MI2S SD lines through the "qcom,sd-lines" device tree property, but this works only when routing audio through the ADSP. This commit adds a very similar configuration for the lpass-cpu driver. It is now possible to add additional subnodes to the lpass device in the device tree, to configure the SD lines for playback and/or capture. E.g. for the Samsung devices mentioned above: &lpass { dai@3 { reg = <MI2S_QUATERNARY>; qcom,playback-sd-lines = <1>; }; }; qcom,playback/capture-sd-lines takes a list of SD lines (0-3) in the same format as the q6afe driver. (The difference here is that q6afe has separate DAIs for playback/capture, while lpass-cpu has one for both...) For backwards compatibility with older device trees, the lpass-cpu driver defaults to LPAIF_I2SCTL_MODE_8CH if the subnode for a DAI is missing. This is equivalent to the previous behavior: Up to 8 channels can be configured, and SD0/QUAT01 will be chosen when setting up a stream with fewer channels. This allows the speaker to work on Samsung MSM8916 devices that use an external speaker amplifier. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200425184657.121991-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-26 02:46:57 +08:00
#define LPASS_CPU_MAX_MI2S_LINES 4
#define LPASS_CPU_I2S_SD0_MASK BIT(0)
#define LPASS_CPU_I2S_SD1_MASK BIT(1)
#define LPASS_CPU_I2S_SD2_MASK BIT(2)
#define LPASS_CPU_I2S_SD3_MASK BIT(3)
#define LPASS_CPU_I2S_SD0_1_MASK GENMASK(1, 0)
#define LPASS_CPU_I2S_SD2_3_MASK GENMASK(3, 2)
#define LPASS_CPU_I2S_SD0_1_2_MASK GENMASK(2, 0)
#define LPASS_CPU_I2S_SD0_1_2_3_MASK GENMASK(3, 0)
static int lpass_cpu_daiops_set_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned int freq, int dir)
{
struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
int ret;
ret = clk_set_rate(drvdata->mi2s_osr_clk[dai->driver->id], freq);
if (ret)
dev_err(dai->dev, "error setting mi2s osrclk to %u: %d\n",
freq, ret);
return ret;
}
static int lpass_cpu_daiops_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
int ret;
ret = clk_prepare_enable(drvdata->mi2s_osr_clk[dai->driver->id]);
if (ret) {
dev_err(dai->dev, "error in enabling mi2s osr clk: %d\n", ret);
return ret;
}
ret = clk_prepare_enable(drvdata->mi2s_bit_clk[dai->driver->id]);
if (ret) {
dev_err(dai->dev, "error in enabling mi2s bit clk: %d\n", ret);
clk_disable_unprepare(drvdata->mi2s_osr_clk[dai->driver->id]);
return ret;
}
return 0;
}
static void lpass_cpu_daiops_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
clk_disable_unprepare(drvdata->mi2s_bit_clk[dai->driver->id]);
clk_disable_unprepare(drvdata->mi2s_osr_clk[dai->driver->id]);
}
static int lpass_cpu_daiops_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
{
struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
snd_pcm_format_t format = params_format(params);
unsigned int channels = params_channels(params);
unsigned int rate = params_rate(params);
ASoC: qcom: lpass-cpu: Make I2S SD lines configurable The LPASS hardware allows configuring the MI2S SD lines to use when playing/recording audio. However, at the moment the lpass-cpu driver has SD0 hard-coded for mono/stereo (or additional fixed SD lines for more channels). For weird reasons there seems to be hardware that uses one of the other SD lines for mono/stereo. For example, some Samsung devices use an external Speaker amplifier connected to Quaternary MI2S. For some reason, the SD line for audio playback was connected to SD1 rather than SD0. (I have no idea why...) At the moment, the lpass-cpu driver cannot be configured to work for the Speaker on these devices. The q6afe driver already allows configuring the MI2S SD lines through the "qcom,sd-lines" device tree property, but this works only when routing audio through the ADSP. This commit adds a very similar configuration for the lpass-cpu driver. It is now possible to add additional subnodes to the lpass device in the device tree, to configure the SD lines for playback and/or capture. E.g. for the Samsung devices mentioned above: &lpass { dai@3 { reg = <MI2S_QUATERNARY>; qcom,playback-sd-lines = <1>; }; }; qcom,playback/capture-sd-lines takes a list of SD lines (0-3) in the same format as the q6afe driver. (The difference here is that q6afe has separate DAIs for playback/capture, while lpass-cpu has one for both...) For backwards compatibility with older device trees, the lpass-cpu driver defaults to LPAIF_I2SCTL_MODE_8CH if the subnode for a DAI is missing. This is equivalent to the previous behavior: Up to 8 channels can be configured, and SD0/QUAT01 will be chosen when setting up a stream with fewer channels. This allows the speaker to work on Samsung MSM8916 devices that use an external speaker amplifier. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200425184657.121991-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-26 02:46:57 +08:00
unsigned int mode;
unsigned int regval;
int bitwidth, ret;
bitwidth = snd_pcm_format_width(format);
if (bitwidth < 0) {
dev_err(dai->dev, "invalid bit width given: %d\n", bitwidth);
return bitwidth;
}
regval = LPAIF_I2SCTL_LOOPBACK_DISABLE |
LPAIF_I2SCTL_WSSRC_INTERNAL;
switch (bitwidth) {
case 16:
regval |= LPAIF_I2SCTL_BITWIDTH_16;
break;
case 24:
regval |= LPAIF_I2SCTL_BITWIDTH_24;
break;
case 32:
regval |= LPAIF_I2SCTL_BITWIDTH_32;
break;
default:
dev_err(dai->dev, "invalid bitwidth given: %d\n", bitwidth);
return -EINVAL;
}
ASoC: qcom: lpass-cpu: Make I2S SD lines configurable The LPASS hardware allows configuring the MI2S SD lines to use when playing/recording audio. However, at the moment the lpass-cpu driver has SD0 hard-coded for mono/stereo (or additional fixed SD lines for more channels). For weird reasons there seems to be hardware that uses one of the other SD lines for mono/stereo. For example, some Samsung devices use an external Speaker amplifier connected to Quaternary MI2S. For some reason, the SD line for audio playback was connected to SD1 rather than SD0. (I have no idea why...) At the moment, the lpass-cpu driver cannot be configured to work for the Speaker on these devices. The q6afe driver already allows configuring the MI2S SD lines through the "qcom,sd-lines" device tree property, but this works only when routing audio through the ADSP. This commit adds a very similar configuration for the lpass-cpu driver. It is now possible to add additional subnodes to the lpass device in the device tree, to configure the SD lines for playback and/or capture. E.g. for the Samsung devices mentioned above: &lpass { dai@3 { reg = <MI2S_QUATERNARY>; qcom,playback-sd-lines = <1>; }; }; qcom,playback/capture-sd-lines takes a list of SD lines (0-3) in the same format as the q6afe driver. (The difference here is that q6afe has separate DAIs for playback/capture, while lpass-cpu has one for both...) For backwards compatibility with older device trees, the lpass-cpu driver defaults to LPAIF_I2SCTL_MODE_8CH if the subnode for a DAI is missing. This is equivalent to the previous behavior: Up to 8 channels can be configured, and SD0/QUAT01 will be chosen when setting up a stream with fewer channels. This allows the speaker to work on Samsung MSM8916 devices that use an external speaker amplifier. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200425184657.121991-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-26 02:46:57 +08:00
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
mode = drvdata->mi2s_playback_sd_mode[dai->driver->id];
else
mode = drvdata->mi2s_capture_sd_mode[dai->driver->id];
if (!mode) {
dev_err(dai->dev, "no line is assigned\n");
return -EINVAL;
}
switch (channels) {
case 1:
case 2:
switch (mode) {
case LPAIF_I2SCTL_MODE_QUAD01:
case LPAIF_I2SCTL_MODE_6CH:
case LPAIF_I2SCTL_MODE_8CH:
mode = LPAIF_I2SCTL_MODE_SD0;
break;
ASoC: qcom: lpass-cpu: Make I2S SD lines configurable The LPASS hardware allows configuring the MI2S SD lines to use when playing/recording audio. However, at the moment the lpass-cpu driver has SD0 hard-coded for mono/stereo (or additional fixed SD lines for more channels). For weird reasons there seems to be hardware that uses one of the other SD lines for mono/stereo. For example, some Samsung devices use an external Speaker amplifier connected to Quaternary MI2S. For some reason, the SD line for audio playback was connected to SD1 rather than SD0. (I have no idea why...) At the moment, the lpass-cpu driver cannot be configured to work for the Speaker on these devices. The q6afe driver already allows configuring the MI2S SD lines through the "qcom,sd-lines" device tree property, but this works only when routing audio through the ADSP. This commit adds a very similar configuration for the lpass-cpu driver. It is now possible to add additional subnodes to the lpass device in the device tree, to configure the SD lines for playback and/or capture. E.g. for the Samsung devices mentioned above: &lpass { dai@3 { reg = <MI2S_QUATERNARY>; qcom,playback-sd-lines = <1>; }; }; qcom,playback/capture-sd-lines takes a list of SD lines (0-3) in the same format as the q6afe driver. (The difference here is that q6afe has separate DAIs for playback/capture, while lpass-cpu has one for both...) For backwards compatibility with older device trees, the lpass-cpu driver defaults to LPAIF_I2SCTL_MODE_8CH if the subnode for a DAI is missing. This is equivalent to the previous behavior: Up to 8 channels can be configured, and SD0/QUAT01 will be chosen when setting up a stream with fewer channels. This allows the speaker to work on Samsung MSM8916 devices that use an external speaker amplifier. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200425184657.121991-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-26 02:46:57 +08:00
case LPAIF_I2SCTL_MODE_QUAD23:
mode = LPAIF_I2SCTL_MODE_SD2;
break;
ASoC: qcom: lpass-cpu: Make I2S SD lines configurable The LPASS hardware allows configuring the MI2S SD lines to use when playing/recording audio. However, at the moment the lpass-cpu driver has SD0 hard-coded for mono/stereo (or additional fixed SD lines for more channels). For weird reasons there seems to be hardware that uses one of the other SD lines for mono/stereo. For example, some Samsung devices use an external Speaker amplifier connected to Quaternary MI2S. For some reason, the SD line for audio playback was connected to SD1 rather than SD0. (I have no idea why...) At the moment, the lpass-cpu driver cannot be configured to work for the Speaker on these devices. The q6afe driver already allows configuring the MI2S SD lines through the "qcom,sd-lines" device tree property, but this works only when routing audio through the ADSP. This commit adds a very similar configuration for the lpass-cpu driver. It is now possible to add additional subnodes to the lpass device in the device tree, to configure the SD lines for playback and/or capture. E.g. for the Samsung devices mentioned above: &lpass { dai@3 { reg = <MI2S_QUATERNARY>; qcom,playback-sd-lines = <1>; }; }; qcom,playback/capture-sd-lines takes a list of SD lines (0-3) in the same format as the q6afe driver. (The difference here is that q6afe has separate DAIs for playback/capture, while lpass-cpu has one for both...) For backwards compatibility with older device trees, the lpass-cpu driver defaults to LPAIF_I2SCTL_MODE_8CH if the subnode for a DAI is missing. This is equivalent to the previous behavior: Up to 8 channels can be configured, and SD0/QUAT01 will be chosen when setting up a stream with fewer channels. This allows the speaker to work on Samsung MSM8916 devices that use an external speaker amplifier. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200425184657.121991-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-26 02:46:57 +08:00
}
break;
case 4:
if (mode < LPAIF_I2SCTL_MODE_QUAD01) {
dev_err(dai->dev, "cannot configure 4 channels with mode %d\n",
mode);
return -EINVAL;
}
ASoC: qcom: lpass-cpu: Make I2S SD lines configurable The LPASS hardware allows configuring the MI2S SD lines to use when playing/recording audio. However, at the moment the lpass-cpu driver has SD0 hard-coded for mono/stereo (or additional fixed SD lines for more channels). For weird reasons there seems to be hardware that uses one of the other SD lines for mono/stereo. For example, some Samsung devices use an external Speaker amplifier connected to Quaternary MI2S. For some reason, the SD line for audio playback was connected to SD1 rather than SD0. (I have no idea why...) At the moment, the lpass-cpu driver cannot be configured to work for the Speaker on these devices. The q6afe driver already allows configuring the MI2S SD lines through the "qcom,sd-lines" device tree property, but this works only when routing audio through the ADSP. This commit adds a very similar configuration for the lpass-cpu driver. It is now possible to add additional subnodes to the lpass device in the device tree, to configure the SD lines for playback and/or capture. E.g. for the Samsung devices mentioned above: &lpass { dai@3 { reg = <MI2S_QUATERNARY>; qcom,playback-sd-lines = <1>; }; }; qcom,playback/capture-sd-lines takes a list of SD lines (0-3) in the same format as the q6afe driver. (The difference here is that q6afe has separate DAIs for playback/capture, while lpass-cpu has one for both...) For backwards compatibility with older device trees, the lpass-cpu driver defaults to LPAIF_I2SCTL_MODE_8CH if the subnode for a DAI is missing. This is equivalent to the previous behavior: Up to 8 channels can be configured, and SD0/QUAT01 will be chosen when setting up a stream with fewer channels. This allows the speaker to work on Samsung MSM8916 devices that use an external speaker amplifier. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200425184657.121991-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-26 02:46:57 +08:00
switch (mode) {
case LPAIF_I2SCTL_MODE_6CH:
case LPAIF_I2SCTL_MODE_8CH:
mode = LPAIF_I2SCTL_MODE_QUAD01;
break;
ASoC: qcom: lpass-cpu: Make I2S SD lines configurable The LPASS hardware allows configuring the MI2S SD lines to use when playing/recording audio. However, at the moment the lpass-cpu driver has SD0 hard-coded for mono/stereo (or additional fixed SD lines for more channels). For weird reasons there seems to be hardware that uses one of the other SD lines for mono/stereo. For example, some Samsung devices use an external Speaker amplifier connected to Quaternary MI2S. For some reason, the SD line for audio playback was connected to SD1 rather than SD0. (I have no idea why...) At the moment, the lpass-cpu driver cannot be configured to work for the Speaker on these devices. The q6afe driver already allows configuring the MI2S SD lines through the "qcom,sd-lines" device tree property, but this works only when routing audio through the ADSP. This commit adds a very similar configuration for the lpass-cpu driver. It is now possible to add additional subnodes to the lpass device in the device tree, to configure the SD lines for playback and/or capture. E.g. for the Samsung devices mentioned above: &lpass { dai@3 { reg = <MI2S_QUATERNARY>; qcom,playback-sd-lines = <1>; }; }; qcom,playback/capture-sd-lines takes a list of SD lines (0-3) in the same format as the q6afe driver. (The difference here is that q6afe has separate DAIs for playback/capture, while lpass-cpu has one for both...) For backwards compatibility with older device trees, the lpass-cpu driver defaults to LPAIF_I2SCTL_MODE_8CH if the subnode for a DAI is missing. This is equivalent to the previous behavior: Up to 8 channels can be configured, and SD0/QUAT01 will be chosen when setting up a stream with fewer channels. This allows the speaker to work on Samsung MSM8916 devices that use an external speaker amplifier. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200425184657.121991-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-26 02:46:57 +08:00
}
break;
case 6:
if (mode < LPAIF_I2SCTL_MODE_6CH) {
dev_err(dai->dev, "cannot configure 6 channels with mode %d\n",
mode);
return -EINVAL;
}
switch (mode) {
case LPAIF_I2SCTL_MODE_8CH:
mode = LPAIF_I2SCTL_MODE_6CH;
break;
ASoC: qcom: lpass-cpu: Make I2S SD lines configurable The LPASS hardware allows configuring the MI2S SD lines to use when playing/recording audio. However, at the moment the lpass-cpu driver has SD0 hard-coded for mono/stereo (or additional fixed SD lines for more channels). For weird reasons there seems to be hardware that uses one of the other SD lines for mono/stereo. For example, some Samsung devices use an external Speaker amplifier connected to Quaternary MI2S. For some reason, the SD line for audio playback was connected to SD1 rather than SD0. (I have no idea why...) At the moment, the lpass-cpu driver cannot be configured to work for the Speaker on these devices. The q6afe driver already allows configuring the MI2S SD lines through the "qcom,sd-lines" device tree property, but this works only when routing audio through the ADSP. This commit adds a very similar configuration for the lpass-cpu driver. It is now possible to add additional subnodes to the lpass device in the device tree, to configure the SD lines for playback and/or capture. E.g. for the Samsung devices mentioned above: &lpass { dai@3 { reg = <MI2S_QUATERNARY>; qcom,playback-sd-lines = <1>; }; }; qcom,playback/capture-sd-lines takes a list of SD lines (0-3) in the same format as the q6afe driver. (The difference here is that q6afe has separate DAIs for playback/capture, while lpass-cpu has one for both...) For backwards compatibility with older device trees, the lpass-cpu driver defaults to LPAIF_I2SCTL_MODE_8CH if the subnode for a DAI is missing. This is equivalent to the previous behavior: Up to 8 channels can be configured, and SD0/QUAT01 will be chosen when setting up a stream with fewer channels. This allows the speaker to work on Samsung MSM8916 devices that use an external speaker amplifier. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200425184657.121991-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-26 02:46:57 +08:00
}
break;
case 8:
if (mode < LPAIF_I2SCTL_MODE_8CH) {
dev_err(dai->dev, "cannot configure 8 channels with mode %d\n",
mode);
return -EINVAL;
}
ASoC: qcom: lpass-cpu: Make I2S SD lines configurable The LPASS hardware allows configuring the MI2S SD lines to use when playing/recording audio. However, at the moment the lpass-cpu driver has SD0 hard-coded for mono/stereo (or additional fixed SD lines for more channels). For weird reasons there seems to be hardware that uses one of the other SD lines for mono/stereo. For example, some Samsung devices use an external Speaker amplifier connected to Quaternary MI2S. For some reason, the SD line for audio playback was connected to SD1 rather than SD0. (I have no idea why...) At the moment, the lpass-cpu driver cannot be configured to work for the Speaker on these devices. The q6afe driver already allows configuring the MI2S SD lines through the "qcom,sd-lines" device tree property, but this works only when routing audio through the ADSP. This commit adds a very similar configuration for the lpass-cpu driver. It is now possible to add additional subnodes to the lpass device in the device tree, to configure the SD lines for playback and/or capture. E.g. for the Samsung devices mentioned above: &lpass { dai@3 { reg = <MI2S_QUATERNARY>; qcom,playback-sd-lines = <1>; }; }; qcom,playback/capture-sd-lines takes a list of SD lines (0-3) in the same format as the q6afe driver. (The difference here is that q6afe has separate DAIs for playback/capture, while lpass-cpu has one for both...) For backwards compatibility with older device trees, the lpass-cpu driver defaults to LPAIF_I2SCTL_MODE_8CH if the subnode for a DAI is missing. This is equivalent to the previous behavior: Up to 8 channels can be configured, and SD0/QUAT01 will be chosen when setting up a stream with fewer channels. This allows the speaker to work on Samsung MSM8916 devices that use an external speaker amplifier. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200425184657.121991-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-26 02:46:57 +08:00
break;
default:
dev_err(dai->dev, "invalid channels given: %u\n", channels);
return -EINVAL;
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
regval |= LPAIF_I2SCTL_SPKMODE(mode);
if (channels >= 2)
regval |= LPAIF_I2SCTL_SPKMONO_STEREO;
else
regval |= LPAIF_I2SCTL_SPKMONO_MONO;
} else {
regval |= LPAIF_I2SCTL_MICMODE(mode);
if (channels >= 2)
regval |= LPAIF_I2SCTL_MICMONO_STEREO;
else
regval |= LPAIF_I2SCTL_MICMONO_MONO;
}
ret = regmap_write(drvdata->lpaif_map,
LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
regval);
if (ret) {
dev_err(dai->dev, "error writing to i2sctl reg: %d\n", ret);
return ret;
}
ret = clk_set_rate(drvdata->mi2s_bit_clk[dai->driver->id],
rate * bitwidth * 2);
if (ret) {
dev_err(dai->dev, "error setting mi2s bitclk to %u: %d\n",
rate * bitwidth * 2, ret);
return ret;
}
return 0;
}
static int lpass_cpu_daiops_hw_free(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
int ret;
ret = regmap_write(drvdata->lpaif_map,
LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
0);
if (ret)
dev_err(dai->dev, "error writing to i2sctl reg: %d\n", ret);
return ret;
}
static int lpass_cpu_daiops_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
int ret;
unsigned int val, mask;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
val = LPAIF_I2SCTL_SPKEN_ENABLE;
mask = LPAIF_I2SCTL_SPKEN_MASK;
} else {
val = LPAIF_I2SCTL_MICEN_ENABLE;
mask = LPAIF_I2SCTL_MICEN_MASK;
}
ret = regmap_update_bits(drvdata->lpaif_map,
LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
mask, val);
if (ret)
dev_err(dai->dev, "error writing to i2sctl reg: %d\n", ret);
return ret;
}
static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream,
int cmd, struct snd_soc_dai *dai)
{
struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
int ret = -EINVAL;
unsigned int val, mask;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
val = LPAIF_I2SCTL_SPKEN_ENABLE;
mask = LPAIF_I2SCTL_SPKEN_MASK;
} else {
val = LPAIF_I2SCTL_MICEN_ENABLE;
mask = LPAIF_I2SCTL_MICEN_MASK;
}
ret = regmap_update_bits(drvdata->lpaif_map,
LPAIF_I2SCTL_REG(drvdata->variant,
dai->driver->id),
mask, val);
if (ret)
dev_err(dai->dev, "error writing to i2sctl reg: %d\n",
ret);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
val = LPAIF_I2SCTL_SPKEN_DISABLE;
mask = LPAIF_I2SCTL_SPKEN_MASK;
} else {
val = LPAIF_I2SCTL_MICEN_DISABLE;
mask = LPAIF_I2SCTL_MICEN_MASK;
}
ret = regmap_update_bits(drvdata->lpaif_map,
LPAIF_I2SCTL_REG(drvdata->variant,
dai->driver->id),
mask, val);
if (ret)
dev_err(dai->dev, "error writing to i2sctl reg: %d\n",
ret);
break;
}
return ret;
}
const struct snd_soc_dai_ops asoc_qcom_lpass_cpu_dai_ops = {
.set_sysclk = lpass_cpu_daiops_set_sysclk,
.startup = lpass_cpu_daiops_startup,
.shutdown = lpass_cpu_daiops_shutdown,
.hw_params = lpass_cpu_daiops_hw_params,
.hw_free = lpass_cpu_daiops_hw_free,
.prepare = lpass_cpu_daiops_prepare,
.trigger = lpass_cpu_daiops_trigger,
};
EXPORT_SYMBOL_GPL(asoc_qcom_lpass_cpu_dai_ops);
int asoc_qcom_lpass_cpu_dai_probe(struct snd_soc_dai *dai)
{
struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
int ret;
/* ensure audio hardware is disabled */
ret = regmap_write(drvdata->lpaif_map,
LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id), 0);
if (ret)
dev_err(dai->dev, "error writing to i2sctl reg: %d\n", ret);
return ret;
}
EXPORT_SYMBOL_GPL(asoc_qcom_lpass_cpu_dai_probe);
static const struct snd_soc_component_driver lpass_cpu_comp_driver = {
.name = "lpass-cpu",
};
static bool lpass_cpu_regmap_writeable(struct device *dev, unsigned int reg)
{
struct lpass_data *drvdata = dev_get_drvdata(dev);
struct lpass_variant *v = drvdata->variant;
int i;
for (i = 0; i < v->i2s_ports; ++i)
if (reg == LPAIF_I2SCTL_REG(v, i))
return true;
for (i = 0; i < v->irq_ports; ++i) {
if (reg == LPAIF_IRQEN_REG(v, i))
return true;
if (reg == LPAIF_IRQCLEAR_REG(v, i))
return true;
}
for (i = 0; i < v->rdma_channels; ++i) {
if (reg == LPAIF_RDMACTL_REG(v, i))
return true;
if (reg == LPAIF_RDMABASE_REG(v, i))
return true;
if (reg == LPAIF_RDMABUFF_REG(v, i))
return true;
if (reg == LPAIF_RDMAPER_REG(v, i))
return true;
}
for (i = 0; i < v->wrdma_channels; ++i) {
if (reg == LPAIF_WRDMACTL_REG(v, i + v->wrdma_channel_start))
return true;
if (reg == LPAIF_WRDMABASE_REG(v, i + v->wrdma_channel_start))
return true;
if (reg == LPAIF_WRDMABUFF_REG(v, i + v->wrdma_channel_start))
return true;
if (reg == LPAIF_WRDMAPER_REG(v, i + v->wrdma_channel_start))
return true;
}
return false;
}
static bool lpass_cpu_regmap_readable(struct device *dev, unsigned int reg)
{
struct lpass_data *drvdata = dev_get_drvdata(dev);
struct lpass_variant *v = drvdata->variant;
int i;
for (i = 0; i < v->i2s_ports; ++i)
if (reg == LPAIF_I2SCTL_REG(v, i))
return true;
for (i = 0; i < v->irq_ports; ++i) {
if (reg == LPAIF_IRQEN_REG(v, i))
return true;
if (reg == LPAIF_IRQSTAT_REG(v, i))
return true;
}
for (i = 0; i < v->rdma_channels; ++i) {
if (reg == LPAIF_RDMACTL_REG(v, i))
return true;
if (reg == LPAIF_RDMABASE_REG(v, i))
return true;
if (reg == LPAIF_RDMABUFF_REG(v, i))
return true;
if (reg == LPAIF_RDMACURR_REG(v, i))
return true;
if (reg == LPAIF_RDMAPER_REG(v, i))
return true;
}
for (i = 0; i < v->wrdma_channels; ++i) {
if (reg == LPAIF_WRDMACTL_REG(v, i + v->wrdma_channel_start))
return true;
if (reg == LPAIF_WRDMABASE_REG(v, i + v->wrdma_channel_start))
return true;
if (reg == LPAIF_WRDMABUFF_REG(v, i + v->wrdma_channel_start))
return true;
if (reg == LPAIF_WRDMACURR_REG(v, i + v->wrdma_channel_start))
return true;
if (reg == LPAIF_WRDMAPER_REG(v, i + v->wrdma_channel_start))
return true;
}
return false;
}
static bool lpass_cpu_regmap_volatile(struct device *dev, unsigned int reg)
{
struct lpass_data *drvdata = dev_get_drvdata(dev);
struct lpass_variant *v = drvdata->variant;
int i;
for (i = 0; i < v->irq_ports; ++i)
if (reg == LPAIF_IRQSTAT_REG(v, i))
return true;
for (i = 0; i < v->rdma_channels; ++i)
if (reg == LPAIF_RDMACURR_REG(v, i))
return true;
for (i = 0; i < v->wrdma_channels; ++i)
if (reg == LPAIF_WRDMACURR_REG(v, i + v->wrdma_channel_start))
return true;
return false;
}
static struct regmap_config lpass_cpu_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.writeable_reg = lpass_cpu_regmap_writeable,
.readable_reg = lpass_cpu_regmap_readable,
.volatile_reg = lpass_cpu_regmap_volatile,
.cache_type = REGCACHE_FLAT,
};
ASoC: qcom: lpass-cpu: Make I2S SD lines configurable The LPASS hardware allows configuring the MI2S SD lines to use when playing/recording audio. However, at the moment the lpass-cpu driver has SD0 hard-coded for mono/stereo (or additional fixed SD lines for more channels). For weird reasons there seems to be hardware that uses one of the other SD lines for mono/stereo. For example, some Samsung devices use an external Speaker amplifier connected to Quaternary MI2S. For some reason, the SD line for audio playback was connected to SD1 rather than SD0. (I have no idea why...) At the moment, the lpass-cpu driver cannot be configured to work for the Speaker on these devices. The q6afe driver already allows configuring the MI2S SD lines through the "qcom,sd-lines" device tree property, but this works only when routing audio through the ADSP. This commit adds a very similar configuration for the lpass-cpu driver. It is now possible to add additional subnodes to the lpass device in the device tree, to configure the SD lines for playback and/or capture. E.g. for the Samsung devices mentioned above: &lpass { dai@3 { reg = <MI2S_QUATERNARY>; qcom,playback-sd-lines = <1>; }; }; qcom,playback/capture-sd-lines takes a list of SD lines (0-3) in the same format as the q6afe driver. (The difference here is that q6afe has separate DAIs for playback/capture, while lpass-cpu has one for both...) For backwards compatibility with older device trees, the lpass-cpu driver defaults to LPAIF_I2SCTL_MODE_8CH if the subnode for a DAI is missing. This is equivalent to the previous behavior: Up to 8 channels can be configured, and SD0/QUAT01 will be chosen when setting up a stream with fewer channels. This allows the speaker to work on Samsung MSM8916 devices that use an external speaker amplifier. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200425184657.121991-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-26 02:46:57 +08:00
static unsigned int of_lpass_cpu_parse_sd_lines(struct device *dev,
struct device_node *node,
const char *name)
{
unsigned int lines[LPASS_CPU_MAX_MI2S_LINES];
unsigned int sd_line_mask = 0;
int num_lines, i;
num_lines = of_property_read_variable_u32_array(node, name, lines, 0,
LPASS_CPU_MAX_MI2S_LINES);
if (num_lines < 0)
return LPAIF_I2SCTL_MODE_NONE;
for (i = 0; i < num_lines; i++)
sd_line_mask |= BIT(lines[i]);
switch (sd_line_mask) {
case LPASS_CPU_I2S_SD0_MASK:
return LPAIF_I2SCTL_MODE_SD0;
case LPASS_CPU_I2S_SD1_MASK:
return LPAIF_I2SCTL_MODE_SD1;
case LPASS_CPU_I2S_SD2_MASK:
return LPAIF_I2SCTL_MODE_SD2;
case LPASS_CPU_I2S_SD3_MASK:
return LPAIF_I2SCTL_MODE_SD3;
case LPASS_CPU_I2S_SD0_1_MASK:
return LPAIF_I2SCTL_MODE_QUAD01;
case LPASS_CPU_I2S_SD2_3_MASK:
return LPAIF_I2SCTL_MODE_QUAD23;
case LPASS_CPU_I2S_SD0_1_2_MASK:
return LPAIF_I2SCTL_MODE_6CH;
case LPASS_CPU_I2S_SD0_1_2_3_MASK:
return LPAIF_I2SCTL_MODE_8CH;
default:
dev_err(dev, "Unsupported SD line mask: %#x\n", sd_line_mask);
return LPAIF_I2SCTL_MODE_NONE;
}
}
static void of_lpass_cpu_parse_dai_data(struct device *dev,
struct lpass_data *data)
{
struct device_node *node;
int ret, id;
/* Allow all channels by default for backwards compatibility */
for (id = 0; id < data->variant->num_dai; id++) {
data->mi2s_playback_sd_mode[id] = LPAIF_I2SCTL_MODE_8CH;
data->mi2s_capture_sd_mode[id] = LPAIF_I2SCTL_MODE_8CH;
}
for_each_child_of_node(dev->of_node, node) {
ret = of_property_read_u32(node, "reg", &id);
if (ret || id < 0 || id >= data->variant->num_dai) {
dev_err(dev, "valid dai id not found: %d\n", ret);
continue;
}
data->mi2s_playback_sd_mode[id] =
of_lpass_cpu_parse_sd_lines(dev, node,
"qcom,playback-sd-lines");
data->mi2s_capture_sd_mode[id] =
of_lpass_cpu_parse_sd_lines(dev, node,
"qcom,capture-sd-lines");
}
}
int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev)
{
struct lpass_data *drvdata;
struct device_node *dsp_of_node;
struct resource *res;
struct lpass_variant *variant;
struct device *dev = &pdev->dev;
const struct of_device_id *match;
int ret, i, dai_id;
dsp_of_node = of_parse_phandle(pdev->dev.of_node, "qcom,adsp", 0);
if (dsp_of_node) {
dev_err(dev, "DSP exists and holds audio resources\n");
return -EBUSY;
}
drvdata = devm_kzalloc(dev, sizeof(struct lpass_data), GFP_KERNEL);
if (!drvdata)
return -ENOMEM;
platform_set_drvdata(pdev, drvdata);
match = of_match_device(dev->driver->of_match_table, dev);
if (!match || !match->data)
return -EINVAL;
drvdata->variant = (struct lpass_variant *)match->data;
variant = drvdata->variant;
ASoC: qcom: lpass-cpu: Make I2S SD lines configurable The LPASS hardware allows configuring the MI2S SD lines to use when playing/recording audio. However, at the moment the lpass-cpu driver has SD0 hard-coded for mono/stereo (or additional fixed SD lines for more channels). For weird reasons there seems to be hardware that uses one of the other SD lines for mono/stereo. For example, some Samsung devices use an external Speaker amplifier connected to Quaternary MI2S. For some reason, the SD line for audio playback was connected to SD1 rather than SD0. (I have no idea why...) At the moment, the lpass-cpu driver cannot be configured to work for the Speaker on these devices. The q6afe driver already allows configuring the MI2S SD lines through the "qcom,sd-lines" device tree property, but this works only when routing audio through the ADSP. This commit adds a very similar configuration for the lpass-cpu driver. It is now possible to add additional subnodes to the lpass device in the device tree, to configure the SD lines for playback and/or capture. E.g. for the Samsung devices mentioned above: &lpass { dai@3 { reg = <MI2S_QUATERNARY>; qcom,playback-sd-lines = <1>; }; }; qcom,playback/capture-sd-lines takes a list of SD lines (0-3) in the same format as the q6afe driver. (The difference here is that q6afe has separate DAIs for playback/capture, while lpass-cpu has one for both...) For backwards compatibility with older device trees, the lpass-cpu driver defaults to LPAIF_I2SCTL_MODE_8CH if the subnode for a DAI is missing. This is equivalent to the previous behavior: Up to 8 channels can be configured, and SD0/QUAT01 will be chosen when setting up a stream with fewer channels. This allows the speaker to work on Samsung MSM8916 devices that use an external speaker amplifier. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200425184657.121991-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-26 02:46:57 +08:00
of_lpass_cpu_parse_dai_data(dev, drvdata);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lpass-lpaif");
drvdata->lpaif = devm_ioremap_resource(dev, res);
if (IS_ERR((void const __force *)drvdata->lpaif)) {
dev_err(dev, "error mapping reg resource: %ld\n",
PTR_ERR((void const __force *)drvdata->lpaif));
return PTR_ERR((void const __force *)drvdata->lpaif);
}
lpass_cpu_regmap_config.max_register = LPAIF_WRDMAPER_REG(variant,
variant->wrdma_channels +
variant->wrdma_channel_start);
drvdata->lpaif_map = devm_regmap_init_mmio(dev, drvdata->lpaif,
&lpass_cpu_regmap_config);
if (IS_ERR(drvdata->lpaif_map)) {
dev_err(dev, "error initializing regmap: %ld\n",
PTR_ERR(drvdata->lpaif_map));
return PTR_ERR(drvdata->lpaif_map);
}
if (variant->init)
variant->init(pdev);
for (i = 0; i < variant->num_dai; i++) {
dai_id = variant->dai_driver[i].id;
drvdata->mi2s_osr_clk[dai_id] = devm_clk_get(dev,
variant->dai_osr_clk_names[i]);
if (IS_ERR(drvdata->mi2s_osr_clk[dai_id])) {
dev_warn(dev,
"%s() error getting optional %s: %ld\n",
__func__,
variant->dai_osr_clk_names[i],
PTR_ERR(drvdata->mi2s_osr_clk[dai_id]));
drvdata->mi2s_osr_clk[dai_id] = NULL;
}
drvdata->mi2s_bit_clk[dai_id] = devm_clk_get(dev,
variant->dai_bit_clk_names[i]);
if (IS_ERR(drvdata->mi2s_bit_clk[dai_id])) {
dev_err(dev,
"error getting %s: %ld\n",
variant->dai_bit_clk_names[i],
PTR_ERR(drvdata->mi2s_bit_clk[dai_id]));
return PTR_ERR(drvdata->mi2s_bit_clk[dai_id]);
}
}
drvdata->ahbix_clk = devm_clk_get(dev, "ahbix-clk");
if (IS_ERR(drvdata->ahbix_clk)) {
dev_err(dev, "error getting ahbix-clk: %ld\n",
PTR_ERR(drvdata->ahbix_clk));
return PTR_ERR(drvdata->ahbix_clk);
}
ret = clk_set_rate(drvdata->ahbix_clk, LPASS_AHBIX_CLOCK_FREQUENCY);
if (ret) {
dev_err(dev, "error setting rate on ahbix_clk: %d\n", ret);
return ret;
}
dev_dbg(dev, "set ahbix_clk rate to %lu\n",
clk_get_rate(drvdata->ahbix_clk));
ret = clk_prepare_enable(drvdata->ahbix_clk);
if (ret) {
dev_err(dev, "error enabling ahbix_clk: %d\n", ret);
return ret;
}
ret = devm_snd_soc_register_component(dev,
&lpass_cpu_comp_driver,
variant->dai_driver,
variant->num_dai);
if (ret) {
dev_err(dev, "error registering cpu driver: %d\n", ret);
goto err_clk;
}
ret = asoc_qcom_lpass_platform_register(pdev);
if (ret) {
dev_err(dev, "error registering platform driver: %d\n", ret);
goto err_clk;
}
return 0;
err_clk:
clk_disable_unprepare(drvdata->ahbix_clk);
return ret;
}
EXPORT_SYMBOL_GPL(asoc_qcom_lpass_cpu_platform_probe);
int asoc_qcom_lpass_cpu_platform_remove(struct platform_device *pdev)
{
struct lpass_data *drvdata = platform_get_drvdata(pdev);
if (drvdata->variant->exit)
drvdata->variant->exit(pdev);
clk_disable_unprepare(drvdata->ahbix_clk);
return 0;
}
EXPORT_SYMBOL_GPL(asoc_qcom_lpass_cpu_platform_remove);
MODULE_DESCRIPTION("QTi LPASS CPU Driver");
MODULE_LICENSE("GPL v2");