2013-03-22 21:24:12 +08:00
|
|
|
/*
|
|
|
|
* Chip-specific setup code for the SAMA5D3 family
|
|
|
|
*
|
|
|
|
* Copyright (C) 2013 Atmel,
|
|
|
|
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
|
|
|
|
*
|
|
|
|
* Licensed under GPLv2 or later.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/dma-mapping.h>
|
2013-10-11 15:37:45 +08:00
|
|
|
#include <linux/clk/at91_pmc.h>
|
2013-03-22 21:24:12 +08:00
|
|
|
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <mach/sama5d3.h>
|
|
|
|
#include <mach/cpu.h>
|
|
|
|
|
|
|
|
#include "soc.h"
|
|
|
|
#include "generic.h"
|
|
|
|
#include "sam9_smc.h"
|
|
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
|
|
* AT91SAM9x5 processor initialization
|
|
|
|
* -------------------------------------------------------------------- */
|
|
|
|
|
|
|
|
static void __init sama5d3_map_io(void)
|
|
|
|
{
|
|
|
|
at91_init_sram(0, SAMA5D3_SRAM_BASE, SAMA5D3_SRAM_SIZE);
|
|
|
|
}
|
|
|
|
|
ARM: at91: fix hanged boot due to early rtc-interrupt
Make sure the RTC-interrupts are masked at boot by adding a new helper
function to be used at SOC-init.
This fixes hanged boot on all AT91 SOCs with an RTC (but RM9200), for
example, after a reset during an RTC-update or if an RTC-alarm goes off
after shutdown (e.g. when using RTC wakeup).
The RTC and RTT-peripherals are powered by backup power (VDDBU) (on all
AT91 SOCs but RM9200) and are not reset on wake-up, user, watchdog or
software reset. This means that their interrupts may be enabled during
early boot if, for example, they where not disabled during a previous
shutdown (e.g. due to a buggy driver or a non-clean shutdown such as a
user reset). Furthermore, an RTC or RTT-alarm may also be active.
The RTC and RTT-interrupts use the shared system-interrupt line, which
is also used by the PIT, and if an interrupt occurs before a handler
(e.g. RTC-driver) has been installed this leads to the system interrupt
being disabled and prevents the system from booting.
Note that when boot hangs due to an early RTC or RTT-interrupt, the only
way to get the system to start again is to remove the backup power (e.g.
battery) or to disable the interrupt manually from the bootloader. In
particular, a user reset is not sufficient.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable@vger.kernel.org # 3.11.x
2013-10-16 17:56:14 +08:00
|
|
|
static void __init sama5d3_initialize(void)
|
|
|
|
{
|
|
|
|
at91_sysirq_mask_rtc(SAMA5D3_BASE_RTC);
|
|
|
|
}
|
|
|
|
|
2013-03-22 21:24:12 +08:00
|
|
|
AT91_SOC_START(sama5d3)
|
|
|
|
.map_io = sama5d3_map_io,
|
ARM: at91: fix hanged boot due to early rtc-interrupt
Make sure the RTC-interrupts are masked at boot by adding a new helper
function to be used at SOC-init.
This fixes hanged boot on all AT91 SOCs with an RTC (but RM9200), for
example, after a reset during an RTC-update or if an RTC-alarm goes off
after shutdown (e.g. when using RTC wakeup).
The RTC and RTT-peripherals are powered by backup power (VDDBU) (on all
AT91 SOCs but RM9200) and are not reset on wake-up, user, watchdog or
software reset. This means that their interrupts may be enabled during
early boot if, for example, they where not disabled during a previous
shutdown (e.g. due to a buggy driver or a non-clean shutdown such as a
user reset). Furthermore, an RTC or RTT-alarm may also be active.
The RTC and RTT-interrupts use the shared system-interrupt line, which
is also used by the PIT, and if an interrupt occurs before a handler
(e.g. RTC-driver) has been installed this leads to the system interrupt
being disabled and prevents the system from booting.
Note that when boot hangs due to an early RTC or RTT-interrupt, the only
way to get the system to start again is to remove the backup power (e.g.
battery) or to disable the interrupt manually from the bootloader. In
particular, a user reset is not sufficient.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable@vger.kernel.org # 3.11.x
2013-10-16 17:56:14 +08:00
|
|
|
.init = sama5d3_initialize,
|
2013-03-22 21:24:12 +08:00
|
|
|
AT91_SOC_END
|