2012-06-15 21:45:08 +08:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2011 Marvell International Ltd. All rights reserved.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms and conditions of the GNU General Public License,
|
|
|
|
* version 2, as published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <linux/dmapool.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/ioport.h>
|
|
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/timer.h>
|
|
|
|
#include <linux/list.h>
|
|
|
|
#include <linux/notifier.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/moduleparam.h>
|
|
|
|
#include <linux/device.h>
|
|
|
|
#include <linux/usb/ch9.h>
|
|
|
|
#include <linux/usb/gadget.h>
|
|
|
|
#include <linux/pm.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/irq.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/platform_data/mv_usb.h>
|
|
|
|
#include <linux/clk.h>
|
|
|
|
|
|
|
|
#include "mv_u3d.h"
|
|
|
|
|
|
|
|
#define DRIVER_DESC "Marvell PXA USB3.0 Device Controller driver"
|
|
|
|
|
|
|
|
static const char driver_name[] = "mv_u3d";
|
|
|
|
static const char driver_desc[] = DRIVER_DESC;
|
|
|
|
|
|
|
|
static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status);
|
|
|
|
static void mv_u3d_stop_activity(struct mv_u3d *u3d,
|
|
|
|
struct usb_gadget_driver *driver);
|
|
|
|
|
|
|
|
/* for endpoint 0 operations */
|
|
|
|
static const struct usb_endpoint_descriptor mv_u3d_ep0_desc = {
|
|
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
|
|
.bEndpointAddress = 0,
|
|
|
|
.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
|
|
|
|
.wMaxPacketSize = MV_U3D_EP0_MAX_PKT_SIZE,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void mv_u3d_ep0_reset(struct mv_u3d *u3d)
|
|
|
|
{
|
|
|
|
struct mv_u3d_ep *ep;
|
|
|
|
u32 epxcr;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
|
|
ep = &u3d->eps[i];
|
|
|
|
ep->u3d = u3d;
|
|
|
|
|
|
|
|
/* ep0 ep context, ep0 in and out share the same ep context */
|
|
|
|
ep->ep_context = &u3d->ep_context[1];
|
|
|
|
}
|
|
|
|
|
|
|
|
/* reset ep state machine */
|
|
|
|
/* reset ep0 out */
|
|
|
|
epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
|
|
|
|
epxcr |= MV_U3D_EPXCR_EP_INIT;
|
|
|
|
iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0);
|
|
|
|
udelay(5);
|
|
|
|
epxcr &= ~MV_U3D_EPXCR_EP_INIT;
|
|
|
|
iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0);
|
|
|
|
|
|
|
|
epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE
|
|
|
|
<< MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
|
|
|
|
| (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
|
|
|
|
| (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
|
|
|
|
| MV_U3D_EPXCR_EP_TYPE_CONTROL);
|
|
|
|
iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr1);
|
|
|
|
|
|
|
|
/* reset ep0 in */
|
|
|
|
epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
|
|
|
|
epxcr |= MV_U3D_EPXCR_EP_INIT;
|
|
|
|
iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0);
|
|
|
|
udelay(5);
|
|
|
|
epxcr &= ~MV_U3D_EPXCR_EP_INIT;
|
|
|
|
iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0);
|
|
|
|
|
|
|
|
epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE
|
|
|
|
<< MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
|
|
|
|
| (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
|
|
|
|
| (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
|
|
|
|
| MV_U3D_EPXCR_EP_TYPE_CONTROL);
|
|
|
|
iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mv_u3d_ep0_stall(struct mv_u3d *u3d)
|
|
|
|
{
|
|
|
|
u32 tmp;
|
|
|
|
dev_dbg(u3d->dev, "%s\n", __func__);
|
|
|
|
|
|
|
|
/* set TX and RX to stall */
|
|
|
|
tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
|
|
|
|
tmp |= MV_U3D_EPXCR_EP_HALT;
|
|
|
|
iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
|
|
|
|
|
|
|
|
tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
|
|
|
|
tmp |= MV_U3D_EPXCR_EP_HALT;
|
|
|
|
iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
|
|
|
|
|
|
|
|
/* update ep0 state */
|
|
|
|
u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
|
|
|
|
u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index,
|
|
|
|
struct mv_u3d_req *curr_req)
|
|
|
|
{
|
|
|
|
struct mv_u3d_trb *curr_trb;
|
|
|
|
dma_addr_t cur_deq_lo;
|
|
|
|
struct mv_u3d_ep_context *curr_ep_context;
|
2013-03-22 15:14:25 +08:00
|
|
|
int trb_complete, actual, remaining_length = 0;
|
2012-06-15 21:45:08 +08:00
|
|
|
int direction, ep_num;
|
|
|
|
int retval = 0;
|
|
|
|
u32 tmp, status, length;
|
|
|
|
|
|
|
|
curr_ep_context = &u3d->ep_context[index];
|
|
|
|
direction = index % 2;
|
|
|
|
ep_num = index / 2;
|
|
|
|
|
|
|
|
trb_complete = 0;
|
|
|
|
actual = curr_req->req.length;
|
|
|
|
|
|
|
|
while (!list_empty(&curr_req->trb_list)) {
|
|
|
|
curr_trb = list_entry(curr_req->trb_list.next,
|
|
|
|
struct mv_u3d_trb, trb_list);
|
|
|
|
if (!curr_trb->trb_hw->ctrl.own) {
|
|
|
|
dev_err(u3d->dev, "%s, TRB own error!\n",
|
|
|
|
u3d->eps[index].name);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
curr_trb->trb_hw->ctrl.own = 0;
|
|
|
|
if (direction == MV_U3D_EP_DIR_OUT) {
|
|
|
|
tmp = ioread32(&u3d->vuc_regs->rxst[ep_num].statuslo);
|
|
|
|
cur_deq_lo =
|
|
|
|
ioread32(&u3d->vuc_regs->rxst[ep_num].curdeqlo);
|
|
|
|
} else {
|
|
|
|
tmp = ioread32(&u3d->vuc_regs->txst[ep_num].statuslo);
|
|
|
|
cur_deq_lo =
|
|
|
|
ioread32(&u3d->vuc_regs->txst[ep_num].curdeqlo);
|
|
|
|
}
|
|
|
|
|
|
|
|
status = tmp >> MV_U3D_XFERSTATUS_COMPLETE_SHIFT;
|
|
|
|
length = tmp & MV_U3D_XFERSTATUS_TRB_LENGTH_MASK;
|
|
|
|
|
|
|
|
if (status == MV_U3D_COMPLETE_SUCCESS ||
|
|
|
|
(status == MV_U3D_COMPLETE_SHORT_PACKET &&
|
|
|
|
direction == MV_U3D_EP_DIR_OUT)) {
|
|
|
|
remaining_length += length;
|
|
|
|
actual -= remaining_length;
|
|
|
|
} else {
|
|
|
|
dev_err(u3d->dev,
|
|
|
|
"complete_tr error: ep=%d %s: error = 0x%x\n",
|
|
|
|
index >> 1, direction ? "SEND" : "RECV",
|
|
|
|
status);
|
|
|
|
retval = -EPROTO;
|
|
|
|
}
|
|
|
|
|
|
|
|
list_del_init(&curr_trb->trb_list);
|
|
|
|
}
|
|
|
|
if (retval)
|
|
|
|
return retval;
|
|
|
|
|
|
|
|
curr_req->req.actual = actual;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* mv_u3d_done() - retire a request; caller blocked irqs
|
|
|
|
* @status : request status to be set, only works when
|
|
|
|
* request is still in progress.
|
|
|
|
*/
|
|
|
|
static
|
|
|
|
void mv_u3d_done(struct mv_u3d_ep *ep, struct mv_u3d_req *req, int status)
|
2013-03-22 23:01:42 +08:00
|
|
|
__releases(&ep->udc->lock)
|
|
|
|
__acquires(&ep->udc->lock)
|
2012-06-15 21:45:08 +08:00
|
|
|
{
|
|
|
|
struct mv_u3d *u3d = (struct mv_u3d *)ep->u3d;
|
|
|
|
|
|
|
|
dev_dbg(u3d->dev, "mv_u3d_done: remove req->queue\n");
|
|
|
|
/* Removed the req from ep queue */
|
|
|
|
list_del_init(&req->queue);
|
|
|
|
|
|
|
|
/* req.status should be set as -EINPROGRESS in ep_queue() */
|
|
|
|
if (req->req.status == -EINPROGRESS)
|
|
|
|
req->req.status = status;
|
|
|
|
else
|
|
|
|
status = req->req.status;
|
|
|
|
|
|
|
|
/* Free trb for the request */
|
|
|
|
if (!req->chain)
|
|
|
|
dma_pool_free(u3d->trb_pool,
|
|
|
|
req->trb_head->trb_hw, req->trb_head->trb_dma);
|
|
|
|
else {
|
|
|
|
dma_unmap_single(ep->u3d->gadget.dev.parent,
|
|
|
|
(dma_addr_t)req->trb_head->trb_dma,
|
|
|
|
req->trb_count * sizeof(struct mv_u3d_trb_hw),
|
|
|
|
DMA_BIDIRECTIONAL);
|
|
|
|
kfree(req->trb_head->trb_hw);
|
|
|
|
}
|
|
|
|
kfree(req->trb_head);
|
|
|
|
|
|
|
|
usb_gadget_unmap_request(&u3d->gadget, &req->req, mv_u3d_ep_dir(ep));
|
|
|
|
|
|
|
|
if (status && (status != -ESHUTDOWN)) {
|
|
|
|
dev_dbg(u3d->dev, "complete %s req %p stat %d len %u/%u",
|
|
|
|
ep->ep.name, &req->req, status,
|
|
|
|
req->req.actual, req->req.length);
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock(&ep->u3d->lock);
|
|
|
|
/*
|
|
|
|
* complete() is from gadget layer,
|
|
|
|
* eg fsg->bulk_in_complete()
|
|
|
|
*/
|
|
|
|
if (req->req.complete)
|
|
|
|
req->req.complete(&ep->ep, &req->req);
|
|
|
|
|
|
|
|
spin_lock(&ep->u3d->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_queue_trb(struct mv_u3d_ep *ep, struct mv_u3d_req *req)
|
|
|
|
{
|
|
|
|
u32 tmp, direction;
|
|
|
|
struct mv_u3d *u3d;
|
|
|
|
struct mv_u3d_ep_context *ep_context;
|
|
|
|
int retval = 0;
|
|
|
|
|
|
|
|
u3d = ep->u3d;
|
|
|
|
direction = mv_u3d_ep_dir(ep);
|
|
|
|
|
|
|
|
/* ep0 in and out share the same ep context slot 1*/
|
|
|
|
if (ep->ep_num == 0)
|
|
|
|
ep_context = &(u3d->ep_context[1]);
|
|
|
|
else
|
|
|
|
ep_context = &(u3d->ep_context[ep->ep_num * 2 + direction]);
|
|
|
|
|
|
|
|
/* check if the pipe is empty or not */
|
|
|
|
if (!list_empty(&ep->queue)) {
|
|
|
|
dev_err(u3d->dev, "add trb to non-empty queue!\n");
|
|
|
|
retval = -ENOMEM;
|
|
|
|
WARN_ON(1);
|
|
|
|
} else {
|
|
|
|
ep_context->rsvd0 = cpu_to_le32(1);
|
|
|
|
ep_context->rsvd1 = 0;
|
|
|
|
|
|
|
|
/* Configure the trb address and set the DCS bit.
|
|
|
|
* Both DCS bit and own bit in trb should be set.
|
|
|
|
*/
|
|
|
|
ep_context->trb_addr_lo =
|
|
|
|
cpu_to_le32(req->trb_head->trb_dma | DCS_ENABLE);
|
|
|
|
ep_context->trb_addr_hi = 0;
|
|
|
|
|
|
|
|
/* Ensure that updates to the EP Context will
|
|
|
|
* occure before Ring Bell.
|
|
|
|
*/
|
|
|
|
wmb();
|
|
|
|
|
|
|
|
/* ring bell the ep */
|
|
|
|
if (ep->ep_num == 0)
|
|
|
|
tmp = 0x1;
|
|
|
|
else
|
|
|
|
tmp = ep->ep_num * 2
|
|
|
|
+ ((direction == MV_U3D_EP_DIR_OUT) ? 0 : 1);
|
|
|
|
|
|
|
|
iowrite32(tmp, &u3d->op_regs->doorbell);
|
|
|
|
}
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct mv_u3d_trb *mv_u3d_build_trb_one(struct mv_u3d_req *req,
|
|
|
|
unsigned *length, dma_addr_t *dma)
|
|
|
|
{
|
|
|
|
u32 temp;
|
|
|
|
unsigned int direction;
|
|
|
|
struct mv_u3d_trb *trb;
|
|
|
|
struct mv_u3d_trb_hw *trb_hw;
|
|
|
|
struct mv_u3d *u3d;
|
|
|
|
|
|
|
|
/* how big will this transfer be? */
|
|
|
|
*length = req->req.length - req->req.actual;
|
|
|
|
BUG_ON(*length > (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER);
|
|
|
|
|
|
|
|
u3d = req->ep->u3d;
|
|
|
|
|
|
|
|
trb = kzalloc(sizeof(*trb), GFP_ATOMIC);
|
|
|
|
if (!trb) {
|
|
|
|
dev_err(u3d->dev, "%s, trb alloc fail\n", __func__);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Be careful that no _GFP_HIGHMEM is set,
|
|
|
|
* or we can not use dma_to_virt
|
|
|
|
* cannot use GFP_KERNEL in spin lock
|
|
|
|
*/
|
|
|
|
trb_hw = dma_pool_alloc(u3d->trb_pool, GFP_ATOMIC, dma);
|
|
|
|
if (!trb_hw) {
|
|
|
|
dev_err(u3d->dev,
|
|
|
|
"%s, dma_pool_alloc fail\n", __func__);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
trb->trb_dma = *dma;
|
|
|
|
trb->trb_hw = trb_hw;
|
|
|
|
|
|
|
|
/* initialize buffer page pointers */
|
|
|
|
temp = (u32)(req->req.dma + req->req.actual);
|
|
|
|
|
|
|
|
trb_hw->buf_addr_lo = cpu_to_le32(temp);
|
|
|
|
trb_hw->buf_addr_hi = 0;
|
|
|
|
trb_hw->trb_len = cpu_to_le32(*length);
|
|
|
|
trb_hw->ctrl.own = 1;
|
|
|
|
|
|
|
|
if (req->ep->ep_num == 0)
|
|
|
|
trb_hw->ctrl.type = TYPE_DATA;
|
|
|
|
else
|
|
|
|
trb_hw->ctrl.type = TYPE_NORMAL;
|
|
|
|
|
|
|
|
req->req.actual += *length;
|
|
|
|
|
|
|
|
direction = mv_u3d_ep_dir(req->ep);
|
|
|
|
if (direction == MV_U3D_EP_DIR_IN)
|
|
|
|
trb_hw->ctrl.dir = 1;
|
|
|
|
else
|
|
|
|
trb_hw->ctrl.dir = 0;
|
|
|
|
|
|
|
|
/* Enable interrupt for the last trb of a request */
|
|
|
|
if (!req->req.no_interrupt)
|
|
|
|
trb_hw->ctrl.ioc = 1;
|
|
|
|
|
|
|
|
trb_hw->ctrl.chain = 0;
|
|
|
|
|
|
|
|
wmb();
|
|
|
|
return trb;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_build_trb_chain(struct mv_u3d_req *req, unsigned *length,
|
|
|
|
struct mv_u3d_trb *trb, int *is_last)
|
|
|
|
{
|
|
|
|
u32 temp;
|
|
|
|
unsigned int direction;
|
|
|
|
struct mv_u3d *u3d;
|
|
|
|
|
|
|
|
/* how big will this transfer be? */
|
|
|
|
*length = min(req->req.length - req->req.actual,
|
|
|
|
(unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER);
|
|
|
|
|
|
|
|
u3d = req->ep->u3d;
|
|
|
|
|
|
|
|
trb->trb_dma = 0;
|
|
|
|
|
|
|
|
/* initialize buffer page pointers */
|
|
|
|
temp = (u32)(req->req.dma + req->req.actual);
|
|
|
|
|
|
|
|
trb->trb_hw->buf_addr_lo = cpu_to_le32(temp);
|
|
|
|
trb->trb_hw->buf_addr_hi = 0;
|
|
|
|
trb->trb_hw->trb_len = cpu_to_le32(*length);
|
|
|
|
trb->trb_hw->ctrl.own = 1;
|
|
|
|
|
|
|
|
if (req->ep->ep_num == 0)
|
|
|
|
trb->trb_hw->ctrl.type = TYPE_DATA;
|
|
|
|
else
|
|
|
|
trb->trb_hw->ctrl.type = TYPE_NORMAL;
|
|
|
|
|
|
|
|
req->req.actual += *length;
|
|
|
|
|
|
|
|
direction = mv_u3d_ep_dir(req->ep);
|
|
|
|
if (direction == MV_U3D_EP_DIR_IN)
|
|
|
|
trb->trb_hw->ctrl.dir = 1;
|
|
|
|
else
|
|
|
|
trb->trb_hw->ctrl.dir = 0;
|
|
|
|
|
|
|
|
/* zlp is needed if req->req.zero is set */
|
|
|
|
if (req->req.zero) {
|
|
|
|
if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
|
|
|
|
*is_last = 1;
|
|
|
|
else
|
|
|
|
*is_last = 0;
|
|
|
|
} else if (req->req.length == req->req.actual)
|
|
|
|
*is_last = 1;
|
|
|
|
else
|
|
|
|
*is_last = 0;
|
|
|
|
|
|
|
|
/* Enable interrupt for the last trb of a request */
|
|
|
|
if (*is_last && !req->req.no_interrupt)
|
|
|
|
trb->trb_hw->ctrl.ioc = 1;
|
|
|
|
|
|
|
|
if (*is_last)
|
|
|
|
trb->trb_hw->ctrl.chain = 0;
|
|
|
|
else {
|
|
|
|
trb->trb_hw->ctrl.chain = 1;
|
|
|
|
dev_dbg(u3d->dev, "chain trb\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
wmb();
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* generate TRB linked list for a request
|
|
|
|
* usb controller only supports continous trb chain,
|
|
|
|
* that trb structure physical address should be continous.
|
|
|
|
*/
|
|
|
|
static int mv_u3d_req_to_trb(struct mv_u3d_req *req)
|
|
|
|
{
|
|
|
|
unsigned count;
|
|
|
|
int is_last;
|
|
|
|
struct mv_u3d_trb *trb;
|
|
|
|
struct mv_u3d_trb_hw *trb_hw;
|
|
|
|
struct mv_u3d *u3d;
|
|
|
|
dma_addr_t dma;
|
|
|
|
unsigned length;
|
|
|
|
unsigned trb_num;
|
|
|
|
|
|
|
|
u3d = req->ep->u3d;
|
|
|
|
|
|
|
|
INIT_LIST_HEAD(&req->trb_list);
|
|
|
|
|
|
|
|
length = req->req.length - req->req.actual;
|
|
|
|
/* normally the request transfer length is less than 16KB.
|
|
|
|
* we use buil_trb_one() to optimize it.
|
|
|
|
*/
|
|
|
|
if (length <= (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER) {
|
|
|
|
trb = mv_u3d_build_trb_one(req, &count, &dma);
|
|
|
|
list_add_tail(&trb->trb_list, &req->trb_list);
|
|
|
|
req->trb_head = trb;
|
|
|
|
req->trb_count = 1;
|
|
|
|
req->chain = 0;
|
|
|
|
} else {
|
|
|
|
trb_num = length / MV_U3D_EP_MAX_LENGTH_TRANSFER;
|
|
|
|
if (length % MV_U3D_EP_MAX_LENGTH_TRANSFER)
|
|
|
|
trb_num++;
|
|
|
|
|
|
|
|
trb = kcalloc(trb_num, sizeof(*trb), GFP_ATOMIC);
|
|
|
|
if (!trb) {
|
|
|
|
dev_err(u3d->dev,
|
|
|
|
"%s, trb alloc fail\n", __func__);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
trb_hw = kcalloc(trb_num, sizeof(*trb_hw), GFP_ATOMIC);
|
|
|
|
if (!trb_hw) {
|
|
|
|
dev_err(u3d->dev,
|
|
|
|
"%s, trb_hw alloc fail\n", __func__);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
do {
|
|
|
|
trb->trb_hw = trb_hw;
|
|
|
|
if (mv_u3d_build_trb_chain(req, &count,
|
|
|
|
trb, &is_last)) {
|
|
|
|
dev_err(u3d->dev,
|
|
|
|
"%s, mv_u3d_build_trb_chain fail\n",
|
|
|
|
__func__);
|
|
|
|
return -EIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
list_add_tail(&trb->trb_list, &req->trb_list);
|
|
|
|
req->trb_count++;
|
|
|
|
trb++;
|
|
|
|
trb_hw++;
|
|
|
|
} while (!is_last);
|
|
|
|
|
|
|
|
req->trb_head = list_entry(req->trb_list.next,
|
|
|
|
struct mv_u3d_trb, trb_list);
|
|
|
|
req->trb_head->trb_dma = dma_map_single(u3d->gadget.dev.parent,
|
|
|
|
req->trb_head->trb_hw,
|
|
|
|
trb_num * sizeof(*trb_hw),
|
|
|
|
DMA_BIDIRECTIONAL);
|
|
|
|
|
|
|
|
req->chain = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mv_u3d_start_queue(struct mv_u3d_ep *ep)
|
|
|
|
{
|
|
|
|
struct mv_u3d *u3d = ep->u3d;
|
|
|
|
struct mv_u3d_req *req;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (!list_empty(&ep->req_list) && !ep->processing)
|
|
|
|
req = list_entry(ep->req_list.next, struct mv_u3d_req, list);
|
|
|
|
else
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
ep->processing = 1;
|
|
|
|
|
|
|
|
/* set up dma mapping */
|
|
|
|
ret = usb_gadget_map_request(&u3d->gadget, &req->req,
|
|
|
|
mv_u3d_ep_dir(ep));
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
req->req.status = -EINPROGRESS;
|
|
|
|
req->req.actual = 0;
|
|
|
|
req->trb_count = 0;
|
|
|
|
|
|
|
|
/* build trbs and push them to device queue */
|
|
|
|
if (!mv_u3d_req_to_trb(req)) {
|
|
|
|
ret = mv_u3d_queue_trb(ep, req);
|
|
|
|
if (ret) {
|
|
|
|
ep->processing = 0;
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
ep->processing = 0;
|
|
|
|
dev_err(u3d->dev, "%s, mv_u3d_req_to_trb fail\n", __func__);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* irq handler advances the queue */
|
|
|
|
if (req)
|
|
|
|
list_add_tail(&req->queue, &ep->queue);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_ep_enable(struct usb_ep *_ep,
|
|
|
|
const struct usb_endpoint_descriptor *desc)
|
|
|
|
{
|
|
|
|
struct mv_u3d *u3d;
|
|
|
|
struct mv_u3d_ep *ep;
|
|
|
|
struct mv_u3d_ep_context *ep_context;
|
|
|
|
u16 max = 0;
|
|
|
|
unsigned maxburst = 0;
|
|
|
|
u32 epxcr, direction;
|
|
|
|
|
|
|
|
if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
ep = container_of(_ep, struct mv_u3d_ep, ep);
|
|
|
|
u3d = ep->u3d;
|
|
|
|
|
|
|
|
if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN)
|
|
|
|
return -ESHUTDOWN;
|
|
|
|
|
|
|
|
direction = mv_u3d_ep_dir(ep);
|
|
|
|
max = le16_to_cpu(desc->wMaxPacketSize);
|
|
|
|
|
|
|
|
if (!_ep->maxburst)
|
|
|
|
_ep->maxburst = 1;
|
|
|
|
maxburst = _ep->maxburst;
|
|
|
|
|
|
|
|
/* Get the endpoint context address */
|
|
|
|
ep_context = (struct mv_u3d_ep_context *)ep->ep_context;
|
|
|
|
|
|
|
|
/* Set the max burst size */
|
|
|
|
switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
|
|
|
|
case USB_ENDPOINT_XFER_BULK:
|
|
|
|
if (maxburst > 16) {
|
|
|
|
dev_dbg(u3d->dev,
|
|
|
|
"max burst should not be greater "
|
|
|
|
"than 16 on bulk ep\n");
|
|
|
|
maxburst = 1;
|
|
|
|
_ep->maxburst = maxburst;
|
|
|
|
}
|
|
|
|
dev_dbg(u3d->dev,
|
|
|
|
"maxburst: %d on bulk %s\n", maxburst, ep->name);
|
|
|
|
break;
|
|
|
|
case USB_ENDPOINT_XFER_CONTROL:
|
|
|
|
/* control transfer only supports maxburst as one */
|
|
|
|
maxburst = 1;
|
|
|
|
_ep->maxburst = maxburst;
|
|
|
|
break;
|
|
|
|
case USB_ENDPOINT_XFER_INT:
|
|
|
|
if (maxburst != 1) {
|
|
|
|
dev_dbg(u3d->dev,
|
|
|
|
"max burst should be 1 on int ep "
|
|
|
|
"if transfer size is not 1024\n");
|
|
|
|
maxburst = 1;
|
|
|
|
_ep->maxburst = maxburst;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case USB_ENDPOINT_XFER_ISOC:
|
|
|
|
if (maxburst != 1) {
|
|
|
|
dev_dbg(u3d->dev,
|
|
|
|
"max burst should be 1 on isoc ep "
|
|
|
|
"if transfer size is not 1024\n");
|
|
|
|
maxburst = 1;
|
|
|
|
_ep->maxburst = maxburst;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
goto en_done;
|
|
|
|
}
|
|
|
|
|
|
|
|
ep->ep.maxpacket = max;
|
|
|
|
ep->ep.desc = desc;
|
|
|
|
ep->enabled = 1;
|
|
|
|
|
|
|
|
/* Enable the endpoint for Rx or Tx and set the endpoint type */
|
|
|
|
if (direction == MV_U3D_EP_DIR_OUT) {
|
|
|
|
epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
|
|
|
|
epxcr |= MV_U3D_EPXCR_EP_INIT;
|
|
|
|
iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
|
|
|
|
udelay(5);
|
|
|
|
epxcr &= ~MV_U3D_EPXCR_EP_INIT;
|
|
|
|
iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
|
|
|
|
|
|
|
|
epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
|
|
|
|
| ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
|
|
|
|
| (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
|
|
|
|
| (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK));
|
|
|
|
iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
|
|
|
|
} else {
|
|
|
|
epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
|
|
|
|
epxcr |= MV_U3D_EPXCR_EP_INIT;
|
|
|
|
iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
|
|
|
|
udelay(5);
|
|
|
|
epxcr &= ~MV_U3D_EPXCR_EP_INIT;
|
|
|
|
iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
|
|
|
|
|
|
|
|
epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
|
|
|
|
| ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
|
|
|
|
| (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
|
|
|
|
| (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK));
|
|
|
|
iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
en_done:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_ep_disable(struct usb_ep *_ep)
|
|
|
|
{
|
|
|
|
struct mv_u3d *u3d;
|
|
|
|
struct mv_u3d_ep *ep;
|
|
|
|
struct mv_u3d_ep_context *ep_context;
|
|
|
|
u32 epxcr, direction;
|
2013-07-24 04:20:17 +08:00
|
|
|
unsigned long flags;
|
2012-06-15 21:45:08 +08:00
|
|
|
|
|
|
|
if (!_ep)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
ep = container_of(_ep, struct mv_u3d_ep, ep);
|
|
|
|
if (!ep->ep.desc)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
u3d = ep->u3d;
|
|
|
|
|
|
|
|
/* Get the endpoint context address */
|
|
|
|
ep_context = ep->ep_context;
|
|
|
|
|
|
|
|
direction = mv_u3d_ep_dir(ep);
|
|
|
|
|
|
|
|
/* nuke all pending requests (does flush) */
|
2013-07-24 04:20:17 +08:00
|
|
|
spin_lock_irqsave(&u3d->lock, flags);
|
2012-06-15 21:45:08 +08:00
|
|
|
mv_u3d_nuke(ep, -ESHUTDOWN);
|
2013-07-24 04:20:17 +08:00
|
|
|
spin_unlock_irqrestore(&u3d->lock, flags);
|
2012-06-15 21:45:08 +08:00
|
|
|
|
|
|
|
/* Disable the endpoint for Rx or Tx and reset the endpoint type */
|
|
|
|
if (direction == MV_U3D_EP_DIR_OUT) {
|
|
|
|
epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
|
|
|
|
epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
|
|
|
|
| USB_ENDPOINT_XFERTYPE_MASK);
|
|
|
|
iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
|
|
|
|
} else {
|
|
|
|
epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
|
|
|
|
epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
|
|
|
|
| USB_ENDPOINT_XFERTYPE_MASK);
|
|
|
|
iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
|
|
|
|
}
|
|
|
|
|
|
|
|
ep->enabled = 0;
|
|
|
|
|
|
|
|
ep->ep.desc = NULL;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct usb_request *
|
|
|
|
mv_u3d_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
|
|
|
|
{
|
|
|
|
struct mv_u3d_req *req = NULL;
|
|
|
|
|
|
|
|
req = kzalloc(sizeof *req, gfp_flags);
|
|
|
|
if (!req)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
INIT_LIST_HEAD(&req->queue);
|
|
|
|
|
|
|
|
return &req->req;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mv_u3d_free_request(struct usb_ep *_ep, struct usb_request *_req)
|
|
|
|
{
|
|
|
|
struct mv_u3d_req *req = container_of(_req, struct mv_u3d_req, req);
|
|
|
|
|
|
|
|
kfree(req);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mv_u3d_ep_fifo_flush(struct usb_ep *_ep)
|
|
|
|
{
|
|
|
|
struct mv_u3d *u3d;
|
|
|
|
u32 direction;
|
|
|
|
struct mv_u3d_ep *ep = container_of(_ep, struct mv_u3d_ep, ep);
|
|
|
|
unsigned int loops;
|
|
|
|
u32 tmp;
|
|
|
|
|
|
|
|
/* if endpoint is not enabled, cannot flush endpoint */
|
|
|
|
if (!ep->enabled)
|
|
|
|
return;
|
|
|
|
|
|
|
|
u3d = ep->u3d;
|
|
|
|
direction = mv_u3d_ep_dir(ep);
|
|
|
|
|
|
|
|
/* ep0 need clear bit after flushing fifo. */
|
|
|
|
if (!ep->ep_num) {
|
|
|
|
if (direction == MV_U3D_EP_DIR_OUT) {
|
|
|
|
tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
|
|
|
|
tmp |= MV_U3D_EPXCR_EP_FLUSH;
|
|
|
|
iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
|
|
|
|
udelay(10);
|
|
|
|
tmp &= ~MV_U3D_EPXCR_EP_FLUSH;
|
|
|
|
iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
|
|
|
|
} else {
|
|
|
|
tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
|
|
|
|
tmp |= MV_U3D_EPXCR_EP_FLUSH;
|
|
|
|
iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
|
|
|
|
udelay(10);
|
|
|
|
tmp &= ~MV_U3D_EPXCR_EP_FLUSH;
|
|
|
|
iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
|
|
|
|
}
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (direction == MV_U3D_EP_DIR_OUT) {
|
|
|
|
tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
|
|
|
|
tmp |= MV_U3D_EPXCR_EP_FLUSH;
|
|
|
|
iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
|
|
|
|
|
|
|
|
/* Wait until flushing completed */
|
|
|
|
loops = LOOPS(MV_U3D_FLUSH_TIMEOUT);
|
|
|
|
while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0) &
|
|
|
|
MV_U3D_EPXCR_EP_FLUSH) {
|
|
|
|
/*
|
|
|
|
* EP_FLUSH bit should be cleared to indicate this
|
|
|
|
* operation is complete
|
|
|
|
*/
|
|
|
|
if (loops == 0) {
|
|
|
|
dev_dbg(u3d->dev,
|
|
|
|
"EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num,
|
|
|
|
direction ? "in" : "out");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
loops--;
|
|
|
|
udelay(LOOPS_USEC);
|
|
|
|
}
|
|
|
|
} else { /* EP_DIR_IN */
|
|
|
|
tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
|
|
|
|
tmp |= MV_U3D_EPXCR_EP_FLUSH;
|
|
|
|
iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
|
|
|
|
|
|
|
|
/* Wait until flushing completed */
|
|
|
|
loops = LOOPS(MV_U3D_FLUSH_TIMEOUT);
|
|
|
|
while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0) &
|
|
|
|
MV_U3D_EPXCR_EP_FLUSH) {
|
|
|
|
/*
|
|
|
|
* EP_FLUSH bit should be cleared to indicate this
|
|
|
|
* operation is complete
|
|
|
|
*/
|
|
|
|
if (loops == 0) {
|
|
|
|
dev_dbg(u3d->dev,
|
|
|
|
"EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num,
|
|
|
|
direction ? "in" : "out");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
loops--;
|
|
|
|
udelay(LOOPS_USEC);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* queues (submits) an I/O request to an endpoint */
|
|
|
|
static int
|
|
|
|
mv_u3d_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
|
|
|
|
{
|
|
|
|
struct mv_u3d_ep *ep;
|
|
|
|
struct mv_u3d_req *req;
|
|
|
|
struct mv_u3d *u3d;
|
|
|
|
unsigned long flags;
|
|
|
|
int is_first_req = 0;
|
|
|
|
|
|
|
|
if (unlikely(!_ep || !_req))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
ep = container_of(_ep, struct mv_u3d_ep, ep);
|
|
|
|
u3d = ep->u3d;
|
|
|
|
|
|
|
|
req = container_of(_req, struct mv_u3d_req, req);
|
|
|
|
|
|
|
|
if (!ep->ep_num
|
|
|
|
&& u3d->ep0_state == MV_U3D_STATUS_STAGE
|
|
|
|
&& !_req->length) {
|
|
|
|
dev_dbg(u3d->dev, "ep0 status stage\n");
|
|
|
|
u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-03-22 15:14:25 +08:00
|
|
|
dev_dbg(u3d->dev, "%s: %s, req: 0x%p\n",
|
|
|
|
__func__, _ep->name, req);
|
2012-06-15 21:45:08 +08:00
|
|
|
|
|
|
|
/* catch various bogus parameters */
|
|
|
|
if (!req->req.complete || !req->req.buf
|
|
|
|
|| !list_empty(&req->queue)) {
|
|
|
|
dev_err(u3d->dev,
|
2013-03-22 15:14:25 +08:00
|
|
|
"%s, bad params, _req: 0x%p,"
|
|
|
|
"req->req.complete: 0x%p, req->req.buf: 0x%p,"
|
2012-06-15 21:45:08 +08:00
|
|
|
"list_empty: 0x%x\n",
|
2013-03-22 15:14:25 +08:00
|
|
|
__func__, _req,
|
|
|
|
req->req.complete, req->req.buf,
|
|
|
|
list_empty(&req->queue));
|
2012-06-15 21:45:08 +08:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
if (unlikely(!ep->ep.desc)) {
|
|
|
|
dev_err(u3d->dev, "%s, bad ep\n", __func__);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
|
|
|
|
if (req->req.length > ep->ep.maxpacket)
|
|
|
|
return -EMSGSIZE;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN) {
|
|
|
|
dev_err(u3d->dev,
|
|
|
|
"bad params of driver/speed\n");
|
|
|
|
return -ESHUTDOWN;
|
|
|
|
}
|
|
|
|
|
|
|
|
req->ep = ep;
|
|
|
|
|
|
|
|
/* Software list handles usb request. */
|
|
|
|
spin_lock_irqsave(&ep->req_lock, flags);
|
|
|
|
is_first_req = list_empty(&ep->req_list);
|
|
|
|
list_add_tail(&req->list, &ep->req_list);
|
|
|
|
spin_unlock_irqrestore(&ep->req_lock, flags);
|
|
|
|
if (!is_first_req) {
|
|
|
|
dev_dbg(u3d->dev, "list is not empty\n");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(u3d->dev, "call mv_u3d_start_queue from usb_ep_queue\n");
|
|
|
|
spin_lock_irqsave(&u3d->lock, flags);
|
|
|
|
mv_u3d_start_queue(ep);
|
|
|
|
spin_unlock_irqrestore(&u3d->lock, flags);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* dequeues (cancels, unlinks) an I/O request from an endpoint */
|
|
|
|
static int mv_u3d_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
|
|
|
|
{
|
|
|
|
struct mv_u3d_ep *ep;
|
|
|
|
struct mv_u3d_req *req;
|
|
|
|
struct mv_u3d *u3d;
|
|
|
|
struct mv_u3d_ep_context *ep_context;
|
|
|
|
struct mv_u3d_req *next_req;
|
|
|
|
|
|
|
|
unsigned long flags;
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
if (!_ep || !_req)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
ep = container_of(_ep, struct mv_u3d_ep, ep);
|
|
|
|
u3d = ep->u3d;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&ep->u3d->lock, flags);
|
|
|
|
|
|
|
|
/* make sure it's actually queued on this endpoint */
|
|
|
|
list_for_each_entry(req, &ep->queue, queue) {
|
|
|
|
if (&req->req == _req)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (&req->req != _req) {
|
|
|
|
ret = -EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* The request is in progress, or completed but not dequeued */
|
|
|
|
if (ep->queue.next == &req->queue) {
|
|
|
|
_req->status = -ECONNRESET;
|
|
|
|
mv_u3d_ep_fifo_flush(_ep);
|
|
|
|
|
|
|
|
/* The request isn't the last request in this ep queue */
|
|
|
|
if (req->queue.next != &ep->queue) {
|
|
|
|
dev_dbg(u3d->dev,
|
|
|
|
"it is the last request in this ep queue\n");
|
|
|
|
ep_context = ep->ep_context;
|
|
|
|
next_req = list_entry(req->queue.next,
|
|
|
|
struct mv_u3d_req, queue);
|
|
|
|
|
|
|
|
/* Point first TRB of next request to the EP context. */
|
2013-03-22 15:14:25 +08:00
|
|
|
iowrite32((unsigned long) next_req->trb_head,
|
2012-06-15 21:45:08 +08:00
|
|
|
&ep_context->trb_addr_lo);
|
|
|
|
} else {
|
|
|
|
struct mv_u3d_ep_context *ep_context;
|
|
|
|
ep_context = ep->ep_context;
|
|
|
|
ep_context->trb_addr_lo = 0;
|
|
|
|
ep_context->trb_addr_hi = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
} else
|
|
|
|
WARN_ON(1);
|
|
|
|
|
|
|
|
mv_u3d_done(ep, req, -ECONNRESET);
|
|
|
|
|
|
|
|
/* remove the req from the ep req list */
|
|
|
|
if (!list_empty(&ep->req_list)) {
|
|
|
|
struct mv_u3d_req *curr_req;
|
|
|
|
curr_req = list_entry(ep->req_list.next,
|
|
|
|
struct mv_u3d_req, list);
|
|
|
|
if (curr_req == req) {
|
|
|
|
list_del_init(&req->list);
|
|
|
|
ep->processing = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
|
|
|
spin_unlock_irqrestore(&ep->u3d->lock, flags);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mv_u3d_ep_set_stall(struct mv_u3d *u3d, u8 ep_num, u8 direction, int stall)
|
|
|
|
{
|
|
|
|
u32 tmp;
|
|
|
|
struct mv_u3d_ep *ep = u3d->eps;
|
|
|
|
|
|
|
|
dev_dbg(u3d->dev, "%s\n", __func__);
|
|
|
|
if (direction == MV_U3D_EP_DIR_OUT) {
|
|
|
|
tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
|
|
|
|
if (stall)
|
|
|
|
tmp |= MV_U3D_EPXCR_EP_HALT;
|
|
|
|
else
|
|
|
|
tmp &= ~MV_U3D_EPXCR_EP_HALT;
|
|
|
|
iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
|
|
|
|
} else {
|
|
|
|
tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
|
|
|
|
if (stall)
|
|
|
|
tmp |= MV_U3D_EPXCR_EP_HALT;
|
|
|
|
else
|
|
|
|
tmp &= ~MV_U3D_EPXCR_EP_HALT;
|
|
|
|
iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge)
|
|
|
|
{
|
|
|
|
struct mv_u3d_ep *ep;
|
|
|
|
unsigned long flags = 0;
|
|
|
|
int status = 0;
|
|
|
|
struct mv_u3d *u3d;
|
|
|
|
|
|
|
|
ep = container_of(_ep, struct mv_u3d_ep, ep);
|
|
|
|
u3d = ep->u3d;
|
|
|
|
if (!ep->ep.desc) {
|
|
|
|
status = -EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
|
|
|
|
status = -EOPNOTSUPP;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Attempt to halt IN ep will fail if any transfer requests
|
|
|
|
* are still queue
|
|
|
|
*/
|
|
|
|
if (halt && (mv_u3d_ep_dir(ep) == MV_U3D_EP_DIR_IN)
|
|
|
|
&& !list_empty(&ep->queue)) {
|
|
|
|
status = -EAGAIN;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_irqsave(&ep->u3d->lock, flags);
|
|
|
|
mv_u3d_ep_set_stall(u3d, ep->ep_num, mv_u3d_ep_dir(ep), halt);
|
|
|
|
if (halt && wedge)
|
|
|
|
ep->wedge = 1;
|
|
|
|
else if (!halt)
|
|
|
|
ep->wedge = 0;
|
|
|
|
spin_unlock_irqrestore(&ep->u3d->lock, flags);
|
|
|
|
|
|
|
|
if (ep->ep_num == 0)
|
|
|
|
u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
|
|
|
|
out:
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_ep_set_halt(struct usb_ep *_ep, int halt)
|
|
|
|
{
|
|
|
|
return mv_u3d_ep_set_halt_wedge(_ep, halt, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_ep_set_wedge(struct usb_ep *_ep)
|
|
|
|
{
|
|
|
|
return mv_u3d_ep_set_halt_wedge(_ep, 1, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct usb_ep_ops mv_u3d_ep_ops = {
|
|
|
|
.enable = mv_u3d_ep_enable,
|
|
|
|
.disable = mv_u3d_ep_disable,
|
|
|
|
|
|
|
|
.alloc_request = mv_u3d_alloc_request,
|
|
|
|
.free_request = mv_u3d_free_request,
|
|
|
|
|
|
|
|
.queue = mv_u3d_ep_queue,
|
|
|
|
.dequeue = mv_u3d_ep_dequeue,
|
|
|
|
|
|
|
|
.set_wedge = mv_u3d_ep_set_wedge,
|
|
|
|
.set_halt = mv_u3d_ep_set_halt,
|
|
|
|
.fifo_flush = mv_u3d_ep_fifo_flush,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void mv_u3d_controller_stop(struct mv_u3d *u3d)
|
|
|
|
{
|
|
|
|
u32 tmp;
|
|
|
|
|
|
|
|
if (!u3d->clock_gating && u3d->vbus_valid_detect)
|
|
|
|
iowrite32(MV_U3D_INTR_ENABLE_VBUS_VALID,
|
|
|
|
&u3d->vuc_regs->intrenable);
|
|
|
|
else
|
|
|
|
iowrite32(0, &u3d->vuc_regs->intrenable);
|
|
|
|
iowrite32(~0x0, &u3d->vuc_regs->endcomplete);
|
|
|
|
iowrite32(~0x0, &u3d->vuc_regs->trbunderrun);
|
|
|
|
iowrite32(~0x0, &u3d->vuc_regs->trbcomplete);
|
|
|
|
iowrite32(~0x0, &u3d->vuc_regs->linkchange);
|
|
|
|
iowrite32(0x1, &u3d->vuc_regs->setuplock);
|
|
|
|
|
|
|
|
/* Reset the RUN bit in the command register to stop USB */
|
|
|
|
tmp = ioread32(&u3d->op_regs->usbcmd);
|
|
|
|
tmp &= ~MV_U3D_CMD_RUN_STOP;
|
|
|
|
iowrite32(tmp, &u3d->op_regs->usbcmd);
|
|
|
|
dev_dbg(u3d->dev, "after u3d_stop, USBCMD 0x%x\n",
|
|
|
|
ioread32(&u3d->op_regs->usbcmd));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mv_u3d_controller_start(struct mv_u3d *u3d)
|
|
|
|
{
|
|
|
|
u32 usbintr;
|
|
|
|
u32 temp;
|
|
|
|
|
|
|
|
/* enable link LTSSM state machine */
|
|
|
|
temp = ioread32(&u3d->vuc_regs->ltssm);
|
|
|
|
temp |= MV_U3D_LTSSM_PHY_INIT_DONE;
|
|
|
|
iowrite32(temp, &u3d->vuc_regs->ltssm);
|
|
|
|
|
|
|
|
/* Enable interrupts */
|
|
|
|
usbintr = MV_U3D_INTR_ENABLE_LINK_CHG | MV_U3D_INTR_ENABLE_TXDESC_ERR |
|
|
|
|
MV_U3D_INTR_ENABLE_RXDESC_ERR | MV_U3D_INTR_ENABLE_TX_COMPLETE |
|
|
|
|
MV_U3D_INTR_ENABLE_RX_COMPLETE | MV_U3D_INTR_ENABLE_SETUP |
|
|
|
|
(u3d->vbus_valid_detect ? MV_U3D_INTR_ENABLE_VBUS_VALID : 0);
|
|
|
|
iowrite32(usbintr, &u3d->vuc_regs->intrenable);
|
|
|
|
|
|
|
|
/* Enable ctrl ep */
|
|
|
|
iowrite32(0x1, &u3d->vuc_regs->ctrlepenable);
|
|
|
|
|
|
|
|
/* Set the Run bit in the command register */
|
|
|
|
iowrite32(MV_U3D_CMD_RUN_STOP, &u3d->op_regs->usbcmd);
|
|
|
|
dev_dbg(u3d->dev, "after u3d_start, USBCMD 0x%x\n",
|
|
|
|
ioread32(&u3d->op_regs->usbcmd));
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_controller_reset(struct mv_u3d *u3d)
|
|
|
|
{
|
|
|
|
unsigned int loops;
|
|
|
|
u32 tmp;
|
|
|
|
|
|
|
|
/* Stop the controller */
|
|
|
|
tmp = ioread32(&u3d->op_regs->usbcmd);
|
|
|
|
tmp &= ~MV_U3D_CMD_RUN_STOP;
|
|
|
|
iowrite32(tmp, &u3d->op_regs->usbcmd);
|
|
|
|
|
|
|
|
/* Reset the controller to get default values */
|
|
|
|
iowrite32(MV_U3D_CMD_CTRL_RESET, &u3d->op_regs->usbcmd);
|
|
|
|
|
|
|
|
/* wait for reset to complete */
|
|
|
|
loops = LOOPS(MV_U3D_RESET_TIMEOUT);
|
|
|
|
while (ioread32(&u3d->op_regs->usbcmd) & MV_U3D_CMD_CTRL_RESET) {
|
|
|
|
if (loops == 0) {
|
|
|
|
dev_err(u3d->dev,
|
|
|
|
"Wait for RESET completed TIMEOUT\n");
|
|
|
|
return -ETIMEDOUT;
|
|
|
|
}
|
|
|
|
loops--;
|
|
|
|
udelay(LOOPS_USEC);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Configure the Endpoint Context Address */
|
|
|
|
iowrite32(u3d->ep_context_dma, &u3d->op_regs->dcbaapl);
|
|
|
|
iowrite32(0, &u3d->op_regs->dcbaaph);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_enable(struct mv_u3d *u3d)
|
|
|
|
{
|
2013-07-30 16:00:51 +08:00
|
|
|
struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev);
|
2012-06-15 21:45:08 +08:00
|
|
|
int retval;
|
|
|
|
|
|
|
|
if (u3d->active)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (!u3d->clock_gating) {
|
|
|
|
u3d->active = 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(u3d->dev, "enable u3d\n");
|
|
|
|
clk_enable(u3d->clk);
|
|
|
|
if (pdata->phy_init) {
|
|
|
|
retval = pdata->phy_init(u3d->phy_regs);
|
|
|
|
if (retval) {
|
|
|
|
dev_err(u3d->dev,
|
|
|
|
"init phy error %d\n", retval);
|
|
|
|
clk_disable(u3d->clk);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
u3d->active = 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mv_u3d_disable(struct mv_u3d *u3d)
|
|
|
|
{
|
2013-07-30 16:00:51 +08:00
|
|
|
struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev);
|
2012-06-15 21:45:08 +08:00
|
|
|
if (u3d->clock_gating && u3d->active) {
|
|
|
|
dev_dbg(u3d->dev, "disable u3d\n");
|
|
|
|
if (pdata->phy_deinit)
|
|
|
|
pdata->phy_deinit(u3d->phy_regs);
|
|
|
|
clk_disable(u3d->clk);
|
|
|
|
u3d->active = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_vbus_session(struct usb_gadget *gadget, int is_active)
|
|
|
|
{
|
|
|
|
struct mv_u3d *u3d;
|
|
|
|
unsigned long flags;
|
|
|
|
int retval = 0;
|
|
|
|
|
|
|
|
u3d = container_of(gadget, struct mv_u3d, gadget);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&u3d->lock, flags);
|
|
|
|
|
|
|
|
u3d->vbus_active = (is_active != 0);
|
|
|
|
dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n",
|
|
|
|
__func__, u3d->softconnect, u3d->vbus_active);
|
|
|
|
/*
|
|
|
|
* 1. external VBUS detect: we can disable/enable clock on demand.
|
|
|
|
* 2. UDC VBUS detect: we have to enable clock all the time.
|
|
|
|
* 3. No VBUS detect: we have to enable clock all the time.
|
|
|
|
*/
|
|
|
|
if (u3d->driver && u3d->softconnect && u3d->vbus_active) {
|
|
|
|
retval = mv_u3d_enable(u3d);
|
|
|
|
if (retval == 0) {
|
|
|
|
/*
|
|
|
|
* after clock is disabled, we lost all the register
|
|
|
|
* context. We have to re-init registers
|
|
|
|
*/
|
|
|
|
mv_u3d_controller_reset(u3d);
|
|
|
|
mv_u3d_ep0_reset(u3d);
|
|
|
|
mv_u3d_controller_start(u3d);
|
|
|
|
}
|
|
|
|
} else if (u3d->driver && u3d->softconnect) {
|
|
|
|
if (!u3d->active)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/* stop all the transfer in queue*/
|
|
|
|
mv_u3d_stop_activity(u3d, u3d->driver);
|
|
|
|
mv_u3d_controller_stop(u3d);
|
|
|
|
mv_u3d_disable(u3d);
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
|
|
|
spin_unlock_irqrestore(&u3d->lock, flags);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* constrain controller's VBUS power usage
|
|
|
|
* This call is used by gadget drivers during SET_CONFIGURATION calls,
|
|
|
|
* reporting how much power the device may consume. For example, this
|
|
|
|
* could affect how quickly batteries are recharged.
|
|
|
|
*
|
|
|
|
* Returns zero on success, else negative errno.
|
|
|
|
*/
|
|
|
|
static int mv_u3d_vbus_draw(struct usb_gadget *gadget, unsigned mA)
|
|
|
|
{
|
|
|
|
struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget);
|
|
|
|
|
|
|
|
u3d->power = mA;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_pullup(struct usb_gadget *gadget, int is_on)
|
|
|
|
{
|
|
|
|
struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget);
|
|
|
|
unsigned long flags;
|
|
|
|
int retval = 0;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&u3d->lock, flags);
|
|
|
|
|
|
|
|
dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n",
|
|
|
|
__func__, u3d->softconnect, u3d->vbus_active);
|
|
|
|
u3d->softconnect = (is_on != 0);
|
|
|
|
if (u3d->driver && u3d->softconnect && u3d->vbus_active) {
|
|
|
|
retval = mv_u3d_enable(u3d);
|
|
|
|
if (retval == 0) {
|
|
|
|
/*
|
|
|
|
* after clock is disabled, we lost all the register
|
|
|
|
* context. We have to re-init registers
|
|
|
|
*/
|
|
|
|
mv_u3d_controller_reset(u3d);
|
|
|
|
mv_u3d_ep0_reset(u3d);
|
|
|
|
mv_u3d_controller_start(u3d);
|
|
|
|
}
|
|
|
|
} else if (u3d->driver && u3d->vbus_active) {
|
|
|
|
/* stop all the transfer in queue*/
|
|
|
|
mv_u3d_stop_activity(u3d, u3d->driver);
|
|
|
|
mv_u3d_controller_stop(u3d);
|
|
|
|
mv_u3d_disable(u3d);
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&u3d->lock, flags);
|
|
|
|
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_start(struct usb_gadget *g,
|
|
|
|
struct usb_gadget_driver *driver)
|
|
|
|
{
|
|
|
|
struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget);
|
2013-07-30 16:00:51 +08:00
|
|
|
struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev);
|
2012-06-15 21:45:08 +08:00
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
if (u3d->driver)
|
|
|
|
return -EBUSY;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&u3d->lock, flags);
|
|
|
|
|
|
|
|
if (!u3d->clock_gating) {
|
|
|
|
clk_enable(u3d->clk);
|
|
|
|
if (pdata->phy_init)
|
|
|
|
pdata->phy_init(u3d->phy_regs);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* hook up the driver ... */
|
|
|
|
driver->driver.bus = NULL;
|
|
|
|
u3d->driver = driver;
|
|
|
|
|
|
|
|
u3d->ep0_dir = USB_DIR_OUT;
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&u3d->lock, flags);
|
|
|
|
|
|
|
|
u3d->vbus_valid_detect = 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_stop(struct usb_gadget *g,
|
|
|
|
struct usb_gadget_driver *driver)
|
|
|
|
{
|
|
|
|
struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget);
|
2013-07-30 16:00:51 +08:00
|
|
|
struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev);
|
2012-06-15 21:45:08 +08:00
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
u3d->vbus_valid_detect = 0;
|
|
|
|
spin_lock_irqsave(&u3d->lock, flags);
|
|
|
|
|
|
|
|
/* enable clock to access controller register */
|
|
|
|
clk_enable(u3d->clk);
|
|
|
|
if (pdata->phy_init)
|
|
|
|
pdata->phy_init(u3d->phy_regs);
|
|
|
|
|
|
|
|
mv_u3d_controller_stop(u3d);
|
|
|
|
/* stop all usb activities */
|
|
|
|
u3d->gadget.speed = USB_SPEED_UNKNOWN;
|
|
|
|
mv_u3d_stop_activity(u3d, driver);
|
|
|
|
mv_u3d_disable(u3d);
|
|
|
|
|
|
|
|
if (pdata->phy_deinit)
|
|
|
|
pdata->phy_deinit(u3d->phy_regs);
|
|
|
|
clk_disable(u3d->clk);
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&u3d->lock, flags);
|
|
|
|
|
|
|
|
u3d->driver = NULL;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* device controller usb_gadget_ops structure */
|
|
|
|
static const struct usb_gadget_ops mv_u3d_ops = {
|
|
|
|
/* notify controller that VBUS is powered or not */
|
|
|
|
.vbus_session = mv_u3d_vbus_session,
|
|
|
|
|
|
|
|
/* constrain controller's VBUS power usage */
|
|
|
|
.vbus_draw = mv_u3d_vbus_draw,
|
|
|
|
|
|
|
|
.pullup = mv_u3d_pullup,
|
|
|
|
.udc_start = mv_u3d_start,
|
|
|
|
.udc_stop = mv_u3d_stop,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int mv_u3d_eps_init(struct mv_u3d *u3d)
|
|
|
|
{
|
|
|
|
struct mv_u3d_ep *ep;
|
|
|
|
char name[14];
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/* initialize ep0, ep0 in/out use eps[1] */
|
|
|
|
ep = &u3d->eps[1];
|
|
|
|
ep->u3d = u3d;
|
|
|
|
strncpy(ep->name, "ep0", sizeof(ep->name));
|
|
|
|
ep->ep.name = ep->name;
|
|
|
|
ep->ep.ops = &mv_u3d_ep_ops;
|
|
|
|
ep->wedge = 0;
|
|
|
|
ep->ep.maxpacket = MV_U3D_EP0_MAX_PKT_SIZE;
|
|
|
|
ep->ep_num = 0;
|
|
|
|
ep->ep.desc = &mv_u3d_ep0_desc;
|
|
|
|
INIT_LIST_HEAD(&ep->queue);
|
|
|
|
INIT_LIST_HEAD(&ep->req_list);
|
|
|
|
ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
|
|
|
|
|
|
|
|
/* add ep0 ep_context */
|
|
|
|
ep->ep_context = &u3d->ep_context[1];
|
|
|
|
|
|
|
|
/* initialize other endpoints */
|
|
|
|
for (i = 2; i < u3d->max_eps * 2; i++) {
|
|
|
|
ep = &u3d->eps[i];
|
|
|
|
if (i & 1) {
|
|
|
|
snprintf(name, sizeof(name), "ep%din", i >> 1);
|
|
|
|
ep->direction = MV_U3D_EP_DIR_IN;
|
|
|
|
} else {
|
|
|
|
snprintf(name, sizeof(name), "ep%dout", i >> 1);
|
|
|
|
ep->direction = MV_U3D_EP_DIR_OUT;
|
|
|
|
}
|
|
|
|
ep->u3d = u3d;
|
|
|
|
strncpy(ep->name, name, sizeof(ep->name));
|
|
|
|
ep->ep.name = ep->name;
|
|
|
|
|
|
|
|
ep->ep.ops = &mv_u3d_ep_ops;
|
|
|
|
ep->ep.maxpacket = (unsigned short) ~0;
|
|
|
|
ep->ep_num = i / 2;
|
|
|
|
|
|
|
|
INIT_LIST_HEAD(&ep->queue);
|
|
|
|
list_add_tail(&ep->ep.ep_list, &u3d->gadget.ep_list);
|
|
|
|
|
|
|
|
INIT_LIST_HEAD(&ep->req_list);
|
|
|
|
spin_lock_init(&ep->req_lock);
|
|
|
|
ep->ep_context = &u3d->ep_context[i];
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* delete all endpoint requests, called with spinlock held */
|
|
|
|
static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status)
|
|
|
|
{
|
|
|
|
/* endpoint fifo flush */
|
|
|
|
mv_u3d_ep_fifo_flush(&ep->ep);
|
|
|
|
|
|
|
|
while (!list_empty(&ep->queue)) {
|
|
|
|
struct mv_u3d_req *req = NULL;
|
|
|
|
req = list_entry(ep->queue.next, struct mv_u3d_req, queue);
|
|
|
|
mv_u3d_done(ep, req, status);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* stop all USB activities */
|
|
|
|
static
|
|
|
|
void mv_u3d_stop_activity(struct mv_u3d *u3d, struct usb_gadget_driver *driver)
|
|
|
|
{
|
|
|
|
struct mv_u3d_ep *ep;
|
|
|
|
|
|
|
|
mv_u3d_nuke(&u3d->eps[1], -ESHUTDOWN);
|
|
|
|
|
|
|
|
list_for_each_entry(ep, &u3d->gadget.ep_list, ep.ep_list) {
|
|
|
|
mv_u3d_nuke(ep, -ESHUTDOWN);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* report disconnect; the driver is already quiesced */
|
|
|
|
if (driver) {
|
|
|
|
spin_unlock(&u3d->lock);
|
|
|
|
driver->disconnect(&u3d->gadget);
|
|
|
|
spin_lock(&u3d->lock);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mv_u3d_irq_process_error(struct mv_u3d *u3d)
|
|
|
|
{
|
|
|
|
/* Increment the error count */
|
|
|
|
u3d->errors++;
|
|
|
|
dev_err(u3d->dev, "%s\n", __func__);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mv_u3d_irq_process_link_change(struct mv_u3d *u3d)
|
|
|
|
{
|
|
|
|
u32 linkchange;
|
|
|
|
|
|
|
|
linkchange = ioread32(&u3d->vuc_regs->linkchange);
|
|
|
|
iowrite32(linkchange, &u3d->vuc_regs->linkchange);
|
|
|
|
|
|
|
|
dev_dbg(u3d->dev, "linkchange: 0x%x\n", linkchange);
|
|
|
|
|
|
|
|
if (linkchange & MV_U3D_LINK_CHANGE_LINK_UP) {
|
|
|
|
dev_dbg(u3d->dev, "link up: ltssm state: 0x%x\n",
|
|
|
|
ioread32(&u3d->vuc_regs->ltssmstate));
|
|
|
|
|
|
|
|
u3d->usb_state = USB_STATE_DEFAULT;
|
|
|
|
u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
|
|
|
|
u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
|
|
|
|
|
|
|
|
/* set speed */
|
|
|
|
u3d->gadget.speed = USB_SPEED_SUPER;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (linkchange & MV_U3D_LINK_CHANGE_SUSPEND) {
|
|
|
|
dev_dbg(u3d->dev, "link suspend\n");
|
|
|
|
u3d->resume_state = u3d->usb_state;
|
|
|
|
u3d->usb_state = USB_STATE_SUSPENDED;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (linkchange & MV_U3D_LINK_CHANGE_RESUME) {
|
|
|
|
dev_dbg(u3d->dev, "link resume\n");
|
|
|
|
u3d->usb_state = u3d->resume_state;
|
|
|
|
u3d->resume_state = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (linkchange & MV_U3D_LINK_CHANGE_WRESET) {
|
|
|
|
dev_dbg(u3d->dev, "warm reset\n");
|
|
|
|
u3d->usb_state = USB_STATE_POWERED;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (linkchange & MV_U3D_LINK_CHANGE_HRESET) {
|
|
|
|
dev_dbg(u3d->dev, "hot reset\n");
|
|
|
|
u3d->usb_state = USB_STATE_DEFAULT;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (linkchange & MV_U3D_LINK_CHANGE_INACT)
|
|
|
|
dev_dbg(u3d->dev, "inactive\n");
|
|
|
|
|
|
|
|
if (linkchange & MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0)
|
|
|
|
dev_dbg(u3d->dev, "ss.disabled\n");
|
|
|
|
|
|
|
|
if (linkchange & MV_U3D_LINK_CHANGE_VBUS_INVALID) {
|
|
|
|
dev_dbg(u3d->dev, "vbus invalid\n");
|
|
|
|
u3d->usb_state = USB_STATE_ATTACHED;
|
|
|
|
u3d->vbus_valid_detect = 1;
|
|
|
|
/* if external vbus detect is not supported,
|
|
|
|
* we handle it here.
|
|
|
|
*/
|
|
|
|
if (!u3d->vbus) {
|
|
|
|
spin_unlock(&u3d->lock);
|
|
|
|
mv_u3d_vbus_session(&u3d->gadget, 0);
|
|
|
|
spin_lock(&u3d->lock);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mv_u3d_ch9setaddress(struct mv_u3d *u3d,
|
|
|
|
struct usb_ctrlrequest *setup)
|
|
|
|
{
|
|
|
|
u32 tmp;
|
|
|
|
|
|
|
|
if (u3d->usb_state != USB_STATE_DEFAULT) {
|
|
|
|
dev_err(u3d->dev,
|
|
|
|
"%s, cannot setaddr in this state (%d)\n",
|
|
|
|
__func__, u3d->usb_state);
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
|
|
|
|
u3d->dev_addr = (u8)setup->wValue;
|
|
|
|
|
|
|
|
dev_dbg(u3d->dev, "%s: 0x%x\n", __func__, u3d->dev_addr);
|
|
|
|
|
|
|
|
if (u3d->dev_addr > 127) {
|
|
|
|
dev_err(u3d->dev,
|
|
|
|
"%s, u3d address is wrong (out of range)\n", __func__);
|
|
|
|
u3d->dev_addr = 0;
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* update usb state */
|
|
|
|
u3d->usb_state = USB_STATE_ADDRESS;
|
|
|
|
|
|
|
|
/* set the new address */
|
|
|
|
tmp = ioread32(&u3d->vuc_regs->devaddrtiebrkr);
|
|
|
|
tmp &= ~0x7F;
|
|
|
|
tmp |= (u32)u3d->dev_addr;
|
|
|
|
iowrite32(tmp, &u3d->vuc_regs->devaddrtiebrkr);
|
|
|
|
|
|
|
|
return;
|
|
|
|
err:
|
|
|
|
mv_u3d_ep0_stall(u3d);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_is_set_configuration(struct usb_ctrlrequest *setup)
|
|
|
|
{
|
|
|
|
if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
|
|
|
|
if (setup->bRequest == USB_REQ_SET_CONFIGURATION)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mv_u3d_handle_setup_packet(struct mv_u3d *u3d, u8 ep_num,
|
|
|
|
struct usb_ctrlrequest *setup)
|
2013-03-22 23:01:42 +08:00
|
|
|
__releases(&u3c->lock)
|
|
|
|
__acquires(&u3c->lock)
|
2012-06-15 21:45:08 +08:00
|
|
|
{
|
|
|
|
bool delegate = false;
|
|
|
|
|
|
|
|
mv_u3d_nuke(&u3d->eps[ep_num * 2 + MV_U3D_EP_DIR_IN], -ESHUTDOWN);
|
|
|
|
|
|
|
|
dev_dbg(u3d->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
|
|
|
|
setup->bRequestType, setup->bRequest,
|
|
|
|
setup->wValue, setup->wIndex, setup->wLength);
|
|
|
|
|
|
|
|
/* We process some stardard setup requests here */
|
|
|
|
if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
|
|
|
|
switch (setup->bRequest) {
|
|
|
|
case USB_REQ_GET_STATUS:
|
|
|
|
delegate = true;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case USB_REQ_SET_ADDRESS:
|
|
|
|
mv_u3d_ch9setaddress(u3d, setup);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case USB_REQ_CLEAR_FEATURE:
|
|
|
|
delegate = true;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case USB_REQ_SET_FEATURE:
|
|
|
|
delegate = true;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
delegate = true;
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
delegate = true;
|
|
|
|
|
|
|
|
/* delegate USB standard requests to the gadget driver */
|
|
|
|
if (delegate == true) {
|
|
|
|
/* USB requests handled by gadget */
|
|
|
|
if (setup->wLength) {
|
|
|
|
/* DATA phase from gadget, STATUS phase from u3d */
|
|
|
|
u3d->ep0_dir = (setup->bRequestType & USB_DIR_IN)
|
|
|
|
? MV_U3D_EP_DIR_IN : MV_U3D_EP_DIR_OUT;
|
|
|
|
spin_unlock(&u3d->lock);
|
|
|
|
if (u3d->driver->setup(&u3d->gadget,
|
|
|
|
&u3d->local_setup_buff) < 0) {
|
|
|
|
dev_err(u3d->dev, "setup error!\n");
|
|
|
|
mv_u3d_ep0_stall(u3d);
|
|
|
|
}
|
|
|
|
spin_lock(&u3d->lock);
|
|
|
|
} else {
|
|
|
|
/* no DATA phase, STATUS phase from gadget */
|
|
|
|
u3d->ep0_dir = MV_U3D_EP_DIR_IN;
|
|
|
|
u3d->ep0_state = MV_U3D_STATUS_STAGE;
|
|
|
|
spin_unlock(&u3d->lock);
|
|
|
|
if (u3d->driver->setup(&u3d->gadget,
|
|
|
|
&u3d->local_setup_buff) < 0)
|
|
|
|
mv_u3d_ep0_stall(u3d);
|
|
|
|
spin_lock(&u3d->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (mv_u3d_is_set_configuration(setup)) {
|
|
|
|
dev_dbg(u3d->dev, "u3d configured\n");
|
|
|
|
u3d->usb_state = USB_STATE_CONFIGURED;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mv_u3d_get_setup_data(struct mv_u3d *u3d, u8 ep_num, u8 *buffer_ptr)
|
|
|
|
{
|
|
|
|
struct mv_u3d_ep_context *epcontext;
|
|
|
|
|
|
|
|
epcontext = &u3d->ep_context[ep_num * 2 + MV_U3D_EP_DIR_IN];
|
|
|
|
|
|
|
|
/* Copy the setup packet to local buffer */
|
|
|
|
memcpy(buffer_ptr, (u8 *) &epcontext->setup_buffer, 8);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mv_u3d_irq_process_setup(struct mv_u3d *u3d)
|
|
|
|
{
|
|
|
|
u32 tmp, i;
|
|
|
|
/* Process all Setup packet received interrupts */
|
|
|
|
tmp = ioread32(&u3d->vuc_regs->setuplock);
|
|
|
|
if (tmp) {
|
|
|
|
for (i = 0; i < u3d->max_eps; i++) {
|
|
|
|
if (tmp & (1 << i)) {
|
|
|
|
mv_u3d_get_setup_data(u3d, i,
|
|
|
|
(u8 *)(&u3d->local_setup_buff));
|
|
|
|
mv_u3d_handle_setup_packet(u3d, i,
|
|
|
|
&u3d->local_setup_buff);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
iowrite32(tmp, &u3d->vuc_regs->setuplock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mv_u3d_irq_process_tr_complete(struct mv_u3d *u3d)
|
|
|
|
{
|
|
|
|
u32 tmp, bit_pos;
|
|
|
|
int i, ep_num = 0, direction = 0;
|
|
|
|
struct mv_u3d_ep *curr_ep;
|
|
|
|
struct mv_u3d_req *curr_req, *temp_req;
|
|
|
|
int status;
|
|
|
|
|
|
|
|
tmp = ioread32(&u3d->vuc_regs->endcomplete);
|
|
|
|
|
|
|
|
dev_dbg(u3d->dev, "tr_complete: ep: 0x%x\n", tmp);
|
|
|
|
if (!tmp)
|
|
|
|
return;
|
|
|
|
iowrite32(tmp, &u3d->vuc_regs->endcomplete);
|
|
|
|
|
|
|
|
for (i = 0; i < u3d->max_eps * 2; i++) {
|
|
|
|
ep_num = i >> 1;
|
|
|
|
direction = i % 2;
|
|
|
|
|
|
|
|
bit_pos = 1 << (ep_num + 16 * direction);
|
|
|
|
|
|
|
|
if (!(bit_pos & tmp))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (i == 0)
|
|
|
|
curr_ep = &u3d->eps[1];
|
|
|
|
else
|
|
|
|
curr_ep = &u3d->eps[i];
|
|
|
|
|
|
|
|
/* remove req out of ep request list after completion */
|
|
|
|
dev_dbg(u3d->dev, "tr comp: check req_list\n");
|
|
|
|
spin_lock(&curr_ep->req_lock);
|
|
|
|
if (!list_empty(&curr_ep->req_list)) {
|
|
|
|
struct mv_u3d_req *req;
|
|
|
|
req = list_entry(curr_ep->req_list.next,
|
|
|
|
struct mv_u3d_req, list);
|
|
|
|
list_del_init(&req->list);
|
|
|
|
curr_ep->processing = 0;
|
|
|
|
}
|
|
|
|
spin_unlock(&curr_ep->req_lock);
|
|
|
|
|
|
|
|
/* process the req queue until an uncomplete request */
|
|
|
|
list_for_each_entry_safe(curr_req, temp_req,
|
|
|
|
&curr_ep->queue, queue) {
|
|
|
|
status = mv_u3d_process_ep_req(u3d, i, curr_req);
|
|
|
|
if (status)
|
|
|
|
break;
|
|
|
|
/* write back status to req */
|
|
|
|
curr_req->req.status = status;
|
|
|
|
|
|
|
|
/* ep0 request completion */
|
|
|
|
if (ep_num == 0) {
|
|
|
|
mv_u3d_done(curr_ep, curr_req, 0);
|
|
|
|
break;
|
|
|
|
} else {
|
|
|
|
mv_u3d_done(curr_ep, curr_req, status);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(u3d->dev, "call mv_u3d_start_queue from ep complete\n");
|
|
|
|
mv_u3d_start_queue(curr_ep);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t mv_u3d_irq(int irq, void *dev)
|
|
|
|
{
|
|
|
|
struct mv_u3d *u3d = (struct mv_u3d *)dev;
|
|
|
|
u32 status, intr;
|
|
|
|
u32 bridgesetting;
|
|
|
|
u32 trbunderrun;
|
|
|
|
|
|
|
|
spin_lock(&u3d->lock);
|
|
|
|
|
|
|
|
status = ioread32(&u3d->vuc_regs->intrcause);
|
|
|
|
intr = ioread32(&u3d->vuc_regs->intrenable);
|
|
|
|
status &= intr;
|
|
|
|
|
|
|
|
if (status == 0) {
|
|
|
|
spin_unlock(&u3d->lock);
|
|
|
|
dev_err(u3d->dev, "irq error!\n");
|
|
|
|
return IRQ_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (status & MV_U3D_USBINT_VBUS_VALID) {
|
|
|
|
bridgesetting = ioread32(&u3d->vuc_regs->bridgesetting);
|
|
|
|
if (bridgesetting & MV_U3D_BRIDGE_SETTING_VBUS_VALID) {
|
|
|
|
/* write vbus valid bit of bridge setting to clear */
|
|
|
|
bridgesetting = MV_U3D_BRIDGE_SETTING_VBUS_VALID;
|
|
|
|
iowrite32(bridgesetting, &u3d->vuc_regs->bridgesetting);
|
|
|
|
dev_dbg(u3d->dev, "vbus valid\n");
|
|
|
|
|
|
|
|
u3d->usb_state = USB_STATE_POWERED;
|
|
|
|
u3d->vbus_valid_detect = 0;
|
|
|
|
/* if external vbus detect is not supported,
|
|
|
|
* we handle it here.
|
|
|
|
*/
|
|
|
|
if (!u3d->vbus) {
|
|
|
|
spin_unlock(&u3d->lock);
|
|
|
|
mv_u3d_vbus_session(&u3d->gadget, 1);
|
|
|
|
spin_lock(&u3d->lock);
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
dev_err(u3d->dev, "vbus bit is not set\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
/* RX data is already in the 16KB FIFO.*/
|
|
|
|
if (status & MV_U3D_USBINT_UNDER_RUN) {
|
|
|
|
trbunderrun = ioread32(&u3d->vuc_regs->trbunderrun);
|
|
|
|
dev_err(u3d->dev, "under run, ep%d\n", trbunderrun);
|
|
|
|
iowrite32(trbunderrun, &u3d->vuc_regs->trbunderrun);
|
|
|
|
mv_u3d_irq_process_error(u3d);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (status & (MV_U3D_USBINT_RXDESC_ERR | MV_U3D_USBINT_TXDESC_ERR)) {
|
|
|
|
/* write one to clear */
|
|
|
|
iowrite32(status & (MV_U3D_USBINT_RXDESC_ERR
|
|
|
|
| MV_U3D_USBINT_TXDESC_ERR),
|
|
|
|
&u3d->vuc_regs->intrcause);
|
|
|
|
dev_err(u3d->dev, "desc err 0x%x\n", status);
|
|
|
|
mv_u3d_irq_process_error(u3d);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (status & MV_U3D_USBINT_LINK_CHG)
|
|
|
|
mv_u3d_irq_process_link_change(u3d);
|
|
|
|
|
|
|
|
if (status & MV_U3D_USBINT_TX_COMPLETE)
|
|
|
|
mv_u3d_irq_process_tr_complete(u3d);
|
|
|
|
|
|
|
|
if (status & MV_U3D_USBINT_RX_COMPLETE)
|
|
|
|
mv_u3d_irq_process_tr_complete(u3d);
|
|
|
|
|
|
|
|
if (status & MV_U3D_USBINT_SETUP)
|
|
|
|
mv_u3d_irq_process_setup(u3d);
|
|
|
|
|
|
|
|
spin_unlock(&u3d->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
2012-11-20 02:26:20 +08:00
|
|
|
static int mv_u3d_remove(struct platform_device *dev)
|
2012-06-15 21:45:08 +08:00
|
|
|
{
|
|
|
|
struct mv_u3d *u3d = platform_get_drvdata(dev);
|
|
|
|
|
|
|
|
BUG_ON(u3d == NULL);
|
|
|
|
|
|
|
|
usb_del_gadget_udc(&u3d->gadget);
|
|
|
|
|
|
|
|
/* free memory allocated in probe */
|
|
|
|
if (u3d->trb_pool)
|
|
|
|
dma_pool_destroy(u3d->trb_pool);
|
|
|
|
|
|
|
|
if (u3d->ep_context)
|
|
|
|
dma_free_coherent(&dev->dev, u3d->ep_context_size,
|
|
|
|
u3d->ep_context, u3d->ep_context_dma);
|
|
|
|
|
|
|
|
kfree(u3d->eps);
|
|
|
|
|
|
|
|
if (u3d->irq)
|
2013-07-04 21:45:02 +08:00
|
|
|
free_irq(u3d->irq, u3d);
|
2012-06-15 21:45:08 +08:00
|
|
|
|
|
|
|
if (u3d->cap_regs)
|
|
|
|
iounmap(u3d->cap_regs);
|
|
|
|
u3d->cap_regs = NULL;
|
|
|
|
|
|
|
|
kfree(u3d->status_req);
|
|
|
|
|
|
|
|
clk_put(u3d->clk);
|
|
|
|
|
|
|
|
kfree(u3d);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_probe(struct platform_device *dev)
|
|
|
|
{
|
|
|
|
struct mv_u3d *u3d = NULL;
|
2013-07-30 16:00:51 +08:00
|
|
|
struct mv_usb_platform_data *pdata = dev_get_platdata(&dev->dev);
|
2012-06-15 21:45:08 +08:00
|
|
|
int retval = 0;
|
|
|
|
struct resource *r;
|
|
|
|
size_t size;
|
|
|
|
|
2013-07-30 16:00:51 +08:00
|
|
|
if (!dev_get_platdata(&dev->dev)) {
|
2012-06-15 21:45:08 +08:00
|
|
|
dev_err(&dev->dev, "missing platform_data\n");
|
|
|
|
retval = -ENODEV;
|
|
|
|
goto err_pdata;
|
|
|
|
}
|
|
|
|
|
|
|
|
u3d = kzalloc(sizeof(*u3d), GFP_KERNEL);
|
|
|
|
if (!u3d) {
|
|
|
|
dev_err(&dev->dev, "failed to allocate memory for u3d\n");
|
|
|
|
retval = -ENOMEM;
|
|
|
|
goto err_alloc_private;
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_init(&u3d->lock);
|
|
|
|
|
|
|
|
platform_set_drvdata(dev, u3d);
|
|
|
|
|
|
|
|
u3d->dev = &dev->dev;
|
|
|
|
u3d->vbus = pdata->vbus;
|
|
|
|
|
2013-04-02 16:12:11 +08:00
|
|
|
u3d->clk = clk_get(&dev->dev, NULL);
|
2012-06-15 21:45:08 +08:00
|
|
|
if (IS_ERR(u3d->clk)) {
|
|
|
|
retval = PTR_ERR(u3d->clk);
|
|
|
|
goto err_get_clk;
|
|
|
|
}
|
|
|
|
|
|
|
|
r = platform_get_resource_byname(dev, IORESOURCE_MEM, "capregs");
|
|
|
|
if (!r) {
|
|
|
|
dev_err(&dev->dev, "no I/O memory resource defined\n");
|
|
|
|
retval = -ENODEV;
|
|
|
|
goto err_get_cap_regs;
|
|
|
|
}
|
|
|
|
|
|
|
|
u3d->cap_regs = (struct mv_u3d_cap_regs __iomem *)
|
|
|
|
ioremap(r->start, resource_size(r));
|
|
|
|
if (!u3d->cap_regs) {
|
|
|
|
dev_err(&dev->dev, "failed to map I/O memory\n");
|
|
|
|
retval = -EBUSY;
|
|
|
|
goto err_map_cap_regs;
|
|
|
|
} else {
|
2013-03-22 15:14:25 +08:00
|
|
|
dev_dbg(&dev->dev, "cap_regs address: 0x%lx/0x%lx\n",
|
|
|
|
(unsigned long) r->start,
|
|
|
|
(unsigned long) u3d->cap_regs);
|
2012-06-15 21:45:08 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* we will access controller register, so enable the u3d controller */
|
|
|
|
clk_enable(u3d->clk);
|
|
|
|
|
|
|
|
if (pdata->phy_init) {
|
|
|
|
retval = pdata->phy_init(u3d->phy_regs);
|
|
|
|
if (retval) {
|
|
|
|
dev_err(&dev->dev, "init phy error %d\n", retval);
|
|
|
|
goto err_u3d_enable;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2013-03-22 15:14:25 +08:00
|
|
|
u3d->op_regs = (struct mv_u3d_op_regs __iomem *)(u3d->cap_regs
|
2012-06-15 21:45:08 +08:00
|
|
|
+ MV_U3D_USB3_OP_REGS_OFFSET);
|
|
|
|
|
2013-03-22 15:14:25 +08:00
|
|
|
u3d->vuc_regs = (struct mv_u3d_vuc_regs __iomem *)(u3d->cap_regs
|
2012-06-15 21:45:08 +08:00
|
|
|
+ ioread32(&u3d->cap_regs->vuoff));
|
|
|
|
|
|
|
|
u3d->max_eps = 16;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* some platform will use usb to download image, it may not disconnect
|
|
|
|
* usb gadget before loading kernel. So first stop u3d here.
|
|
|
|
*/
|
|
|
|
mv_u3d_controller_stop(u3d);
|
|
|
|
iowrite32(0xFFFFFFFF, &u3d->vuc_regs->intrcause);
|
|
|
|
|
|
|
|
if (pdata->phy_deinit)
|
|
|
|
pdata->phy_deinit(u3d->phy_regs);
|
|
|
|
clk_disable(u3d->clk);
|
|
|
|
|
|
|
|
size = u3d->max_eps * sizeof(struct mv_u3d_ep_context) * 2;
|
|
|
|
size = (size + MV_U3D_EP_CONTEXT_ALIGNMENT - 1)
|
|
|
|
& ~(MV_U3D_EP_CONTEXT_ALIGNMENT - 1);
|
|
|
|
u3d->ep_context = dma_alloc_coherent(&dev->dev, size,
|
|
|
|
&u3d->ep_context_dma, GFP_KERNEL);
|
|
|
|
if (!u3d->ep_context) {
|
|
|
|
dev_err(&dev->dev, "allocate ep context memory failed\n");
|
|
|
|
retval = -ENOMEM;
|
|
|
|
goto err_alloc_ep_context;
|
|
|
|
}
|
|
|
|
u3d->ep_context_size = size;
|
|
|
|
|
|
|
|
/* create TRB dma_pool resource */
|
|
|
|
u3d->trb_pool = dma_pool_create("u3d_trb",
|
|
|
|
&dev->dev,
|
|
|
|
sizeof(struct mv_u3d_trb_hw),
|
|
|
|
MV_U3D_TRB_ALIGNMENT,
|
|
|
|
MV_U3D_DMA_BOUNDARY);
|
|
|
|
|
|
|
|
if (!u3d->trb_pool) {
|
|
|
|
retval = -ENOMEM;
|
|
|
|
goto err_alloc_trb_pool;
|
|
|
|
}
|
|
|
|
|
|
|
|
size = u3d->max_eps * sizeof(struct mv_u3d_ep) * 2;
|
|
|
|
u3d->eps = kzalloc(size, GFP_KERNEL);
|
|
|
|
if (!u3d->eps) {
|
|
|
|
dev_err(&dev->dev, "allocate ep memory failed\n");
|
|
|
|
retval = -ENOMEM;
|
|
|
|
goto err_alloc_eps;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* initialize ep0 status request structure */
|
|
|
|
u3d->status_req = kzalloc(sizeof(struct mv_u3d_req) + 8, GFP_KERNEL);
|
|
|
|
if (!u3d->status_req) {
|
|
|
|
dev_err(&dev->dev, "allocate status_req memory failed\n");
|
|
|
|
retval = -ENOMEM;
|
|
|
|
goto err_alloc_status_req;
|
|
|
|
}
|
|
|
|
INIT_LIST_HEAD(&u3d->status_req->queue);
|
|
|
|
|
|
|
|
/* allocate a small amount of memory to get valid address */
|
|
|
|
u3d->status_req->req.buf = (char *)u3d->status_req
|
|
|
|
+ sizeof(struct mv_u3d_req);
|
|
|
|
u3d->status_req->req.dma = virt_to_phys(u3d->status_req->req.buf);
|
|
|
|
|
|
|
|
u3d->resume_state = USB_STATE_NOTATTACHED;
|
|
|
|
u3d->usb_state = USB_STATE_ATTACHED;
|
|
|
|
u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
|
|
|
|
u3d->remote_wakeup = 0;
|
|
|
|
|
|
|
|
r = platform_get_resource(dev, IORESOURCE_IRQ, 0);
|
|
|
|
if (!r) {
|
|
|
|
dev_err(&dev->dev, "no IRQ resource defined\n");
|
|
|
|
retval = -ENODEV;
|
|
|
|
goto err_get_irq;
|
|
|
|
}
|
|
|
|
u3d->irq = r->start;
|
|
|
|
if (request_irq(u3d->irq, mv_u3d_irq,
|
|
|
|
IRQF_DISABLED | IRQF_SHARED, driver_name, u3d)) {
|
|
|
|
u3d->irq = 0;
|
|
|
|
dev_err(&dev->dev, "Request irq %d for u3d failed\n",
|
|
|
|
u3d->irq);
|
|
|
|
retval = -ENODEV;
|
|
|
|
goto err_request_irq;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* initialize gadget structure */
|
|
|
|
u3d->gadget.ops = &mv_u3d_ops; /* usb_gadget_ops */
|
|
|
|
u3d->gadget.ep0 = &u3d->eps[1].ep; /* gadget ep0 */
|
|
|
|
INIT_LIST_HEAD(&u3d->gadget.ep_list); /* ep_list */
|
|
|
|
u3d->gadget.speed = USB_SPEED_UNKNOWN; /* speed */
|
|
|
|
|
|
|
|
/* the "gadget" abstracts/virtualizes the controller */
|
|
|
|
u3d->gadget.name = driver_name; /* gadget name */
|
|
|
|
|
|
|
|
mv_u3d_eps_init(u3d);
|
|
|
|
|
|
|
|
/* external vbus detection */
|
|
|
|
if (u3d->vbus) {
|
|
|
|
u3d->clock_gating = 1;
|
|
|
|
dev_err(&dev->dev, "external vbus detection\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!u3d->clock_gating)
|
|
|
|
u3d->vbus_active = 1;
|
|
|
|
|
|
|
|
/* enable usb3 controller vbus detection */
|
|
|
|
u3d->vbus_valid_detect = 1;
|
|
|
|
|
|
|
|
retval = usb_add_gadget_udc(&dev->dev, &u3d->gadget);
|
|
|
|
if (retval)
|
|
|
|
goto err_unregister;
|
|
|
|
|
|
|
|
dev_dbg(&dev->dev, "successful probe usb3 device %s clock gating.\n",
|
|
|
|
u3d->clock_gating ? "with" : "without");
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_unregister:
|
2013-07-04 21:45:02 +08:00
|
|
|
free_irq(u3d->irq, u3d);
|
2012-06-15 21:45:08 +08:00
|
|
|
err_request_irq:
|
|
|
|
err_get_irq:
|
|
|
|
kfree(u3d->status_req);
|
|
|
|
err_alloc_status_req:
|
|
|
|
kfree(u3d->eps);
|
|
|
|
err_alloc_eps:
|
|
|
|
dma_pool_destroy(u3d->trb_pool);
|
|
|
|
err_alloc_trb_pool:
|
|
|
|
dma_free_coherent(&dev->dev, u3d->ep_context_size,
|
|
|
|
u3d->ep_context, u3d->ep_context_dma);
|
|
|
|
err_alloc_ep_context:
|
|
|
|
if (pdata->phy_deinit)
|
|
|
|
pdata->phy_deinit(u3d->phy_regs);
|
|
|
|
clk_disable(u3d->clk);
|
|
|
|
err_u3d_enable:
|
|
|
|
iounmap(u3d->cap_regs);
|
|
|
|
err_map_cap_regs:
|
|
|
|
err_get_cap_regs:
|
|
|
|
err_get_clk:
|
|
|
|
clk_put(u3d->clk);
|
|
|
|
kfree(u3d);
|
|
|
|
err_alloc_private:
|
|
|
|
err_pdata:
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
2013-03-19 09:28:56 +08:00
|
|
|
#ifdef CONFIG_PM_SLEEP
|
2012-06-15 21:45:08 +08:00
|
|
|
static int mv_u3d_suspend(struct device *dev)
|
|
|
|
{
|
|
|
|
struct mv_u3d *u3d = dev_get_drvdata(dev);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* only cable is unplugged, usb can suspend.
|
|
|
|
* So do not care about clock_gating == 1, it is handled by
|
|
|
|
* vbus session.
|
|
|
|
*/
|
|
|
|
if (!u3d->clock_gating) {
|
|
|
|
mv_u3d_controller_stop(u3d);
|
|
|
|
|
|
|
|
spin_lock_irq(&u3d->lock);
|
|
|
|
/* stop all usb activities */
|
|
|
|
mv_u3d_stop_activity(u3d, u3d->driver);
|
|
|
|
spin_unlock_irq(&u3d->lock);
|
|
|
|
|
|
|
|
mv_u3d_disable(u3d);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mv_u3d_resume(struct device *dev)
|
|
|
|
{
|
|
|
|
struct mv_u3d *u3d = dev_get_drvdata(dev);
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
if (!u3d->clock_gating) {
|
|
|
|
retval = mv_u3d_enable(u3d);
|
|
|
|
if (retval)
|
|
|
|
return retval;
|
|
|
|
|
|
|
|
if (u3d->driver && u3d->softconnect) {
|
|
|
|
mv_u3d_controller_reset(u3d);
|
|
|
|
mv_u3d_ep0_reset(u3d);
|
|
|
|
mv_u3d_controller_start(u3d);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2013-03-19 09:28:56 +08:00
|
|
|
static SIMPLE_DEV_PM_OPS(mv_u3d_pm_ops, mv_u3d_suspend, mv_u3d_resume);
|
|
|
|
|
2012-06-15 21:45:08 +08:00
|
|
|
static void mv_u3d_shutdown(struct platform_device *dev)
|
|
|
|
{
|
2013-05-23 18:19:22 +08:00
|
|
|
struct mv_u3d *u3d = platform_get_drvdata(dev);
|
2012-06-15 21:45:08 +08:00
|
|
|
u32 tmp;
|
|
|
|
|
|
|
|
tmp = ioread32(&u3d->op_regs->usbcmd);
|
|
|
|
tmp &= ~MV_U3D_CMD_RUN_STOP;
|
|
|
|
iowrite32(tmp, &u3d->op_regs->usbcmd);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver mv_u3d_driver = {
|
|
|
|
.probe = mv_u3d_probe,
|
2013-01-24 22:38:19 +08:00
|
|
|
.remove = mv_u3d_remove,
|
2012-06-15 21:45:08 +08:00
|
|
|
.shutdown = mv_u3d_shutdown,
|
|
|
|
.driver = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.name = "mv-u3d",
|
|
|
|
.pm = &mv_u3d_pm_ops,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
module_platform_driver(mv_u3d_driver);
|
|
|
|
MODULE_ALIAS("platform:mv-u3d");
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
|
|
MODULE_AUTHOR("Yu Xu <yuxu@marvell.com>");
|
|
|
|
MODULE_LICENSE("GPL");
|