openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/pinctrl/sh-pfc/Kconfig

178 lines
3.3 KiB
Plaintext
Raw Normal View History

sh-pfc: Move driver from drivers/sh/ to drivers/pinctrl/ Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:19 +08:00
#
# Renesas SH and SH Mobile PINCTRL drivers
#
sh: pfc: Shuffle PFC support core. This follows the intc/clk changes and shuffles the PFC support code under its own directory. This will facilitate better code sharing, and allow us to trim down the exported interface by quite a margin. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-07-10 10:49:30 +08:00
pinctrl: sh-pfc: Use ARCH_RENESAS Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-25 08:51:54 +08:00
if ARCH_RENESAS || SUPERH
sh-pfc: Move driver from drivers/sh/ to drivers/pinctrl/ Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:19 +08:00
config PINCTRL_SH_PFC
sh: pfc: Rudimentary pinctrl-backed GPIO support. This begins the migration of the PFC core to the pinctrl subsystem. Initial support is very basic, with the bulk of the implementation simply being nopped out in such a way to allow registration with the pinctrl core to succeed. The gpio chip driver is stripped down considerably now relying purely on pinctrl API calls to manage the bulk of its operations. This provides a basis for further PFC refactoring, including decoupling pin functions from the GPIO API, establishing pin groups, and so forth. These will all be dealt with incrementally so as to introduce as few growing and migratory pains to tree-wide PFC pinmux users today. When the interfaces have been well established and in-tree users have been migrated off of the legacy interfaces it will be possible to strip down the core considerably, leading to eventual drivers/pinctrl rehoming. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-07-10 11:08:14 +08:00
select PINMUX
select PINCONF
sh-pfc: Implement generic pinconf support The existing PFC pinconf implementation, tied to the PFC-specific pin types, isn't used by drivers or boards. Replace it with the generic pinconf types to implement bias (pull-up/down) setup. Other pin configuration options can be implemented later if needed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-10 23:44:02 +08:00
select GENERIC_PINCONF
sh-pfc: Merge PFC core and pinctrl The PFC core is only used by the pinctrl and gpio modules. As the gpio module depends on the pinctrl module, the pinctrl module will always be present if the core gets used. There is thus no point in keeping core and pinctrl in two seperate modules. Merge them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:50:45 +08:00
def_bool y
sh-pfc: Move driver from drivers/sh/ to drivers/pinctrl/ Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:19 +08:00
help
This enables pin control drivers for SH and SH Mobile platforms
sh: pfc: Rudimentary pinctrl-backed GPIO support. This begins the migration of the PFC core to the pinctrl subsystem. Initial support is very basic, with the bulk of the implementation simply being nopped out in such a way to allow registration with the pinctrl core to succeed. The gpio chip driver is stripped down considerably now relying purely on pinctrl API calls to manage the bulk of its operations. This provides a basis for further PFC refactoring, including decoupling pin functions from the GPIO API, establishing pin groups, and so forth. These will all be dealt with incrementally so as to introduce as few growing and migratory pains to tree-wide PFC pinmux users today. When the interfaces have been well established and in-tree users have been migrated off of the legacy interfaces it will be possible to strip down the core considerably, leading to eventual drivers/pinctrl rehoming. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-07-10 11:08:14 +08:00
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
config PINCTRL_SH_PFC_GPIO
select GPIOLIB
select PINCTRL_SH_PFC
bool
sh: pfc: Shuffle PFC support core. This follows the intc/clk changes and shuffles the PFC support code under its own directory. This will facilitate better code sharing, and allow us to trim down the exported interface by quite a margin. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-07-10 10:49:30 +08:00
help
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
This enables pin control and GPIO drivers for SH/SH Mobile platforms
sh-pfc: Move driver from drivers/sh/ to drivers/pinctrl/ Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:19 +08:00
sh-pfc: Add emev2 pinmux support Add PFC support for the EMMA Mobile EV2 SoC including pin groups for on-chip devices. Signed-off-by: Niklas Söderlund <niso@kth.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-25 21:49:52 +08:00
config PINCTRL_PFC_EMEV2
def_bool y
depends on ARCH_EMEV2
select PINCTRL_SH_PFC
sh-pfc: Add r8a73a4 pinmux support Add initial PFC support for the r8a73a4 SoC. At this point only GPIO interface is supported, move to newer interfaces planned as incremental changes. Original authors are Morimoto-san with help from Yoshii-san, thanks to them for the heavy lifting. Adjusted by Magnus to work together with updated code in drivers/pinctrl. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com> Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-26 21:49:49 +08:00
config PINCTRL_PFC_R8A73A4
def_bool y
depends on ARCH_R8A73A4
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
select PINCTRL_SH_PFC_GPIO
sh-pfc: Add r8a73a4 pinmux support Add initial PFC support for the r8a73a4 SoC. At this point only GPIO interface is supported, move to newer interfaces planned as incremental changes. Original authors are Morimoto-san with help from Yoshii-san, thanks to them for the heavy lifting. Adjusted by Magnus to work together with updated code in drivers/pinctrl. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com> Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-26 21:49:49 +08:00
sh-pfc: Add r8a7740 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:21 +08:00
config PINCTRL_PFC_R8A7740
def_bool y
depends on ARCH_R8A7740
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
select PINCTRL_SH_PFC_GPIO
sh-pfc: Add r8a7740 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:21 +08:00
pinctrl: sh-pfc: r8a7791: Add R8A7743 support Renesas RZ/G1M (R8A7743) is pin compatible with R-Car M2-W/N (R8A7791/3), however it doesn't have several automotive specific peripherals. Annotate all the items that only exist on the R-Car SoCs and only supply the pin groups/functions existing on a given SoC... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Rob Herring <robh@kernel.org> [geert: Drop annotations, as they are implied by pin groups/functions] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-04-21 02:46:08 +08:00
config PINCTRL_PFC_R8A7743
def_bool y
depends on ARCH_R8A7743
select PINCTRL_SH_PFC
pinctrl: sh-pfc: r8a7794: Add R8A7745 support Renesas RZ/G1E (R8A7745) is pin compatible with R-Car E2 (R8A7794), however it doesn't have several automotive specific peripherals. Annotate all the items that only exist on the R-Car SoCs... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Rob Herring <robh@kernel.org> [geert: Drop annotations, as they are implied by pin groups/functions] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-04-29 02:52:35 +08:00
config PINCTRL_PFC_R8A7745
def_bool y
depends on ARCH_R8A7745
select PINCTRL_SH_PFC
sh-pfc: Add r8a7778 pinmux support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2013-04-12 13:37:20 +08:00
config PINCTRL_PFC_R8A7778
def_bool y
depends on ARCH_R8A7778
select PINCTRL_SH_PFC
sh-pfc: Add r8a7779 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:22 +08:00
config PINCTRL_PFC_R8A7779
def_bool y
depends on ARCH_R8A7779
select PINCTRL_SH_PFC
sh-pfc: Initial r8a7790 PFC support Add initial PFC support for the r8a7790 SoC. At this point only GPIO interface is supported, move to newer interfaces planned as incremental changes. Original authors is Koji Matsuoka-san, thanks for him and his team for the heavy lifting. Adjusted by Magnus to work together with updated code in drivers/pinctrl. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@rms.renesas.com> Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-08 10:08:53 +08:00
config PINCTRL_PFC_R8A7790
def_bool y
depends on ARCH_R8A7790
select PINCTRL_SH_PFC
pinctrl: sh-pfc: r8a7791 PFC support Add PFC support for the r8a7791 SoC V2 including pin groups for on-chip devices such as MSIOF, SCIF, USB, MMC, SDHI, DU. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Kunihito Higashiyama <kunihito.higashiyama.ur@renesas.com> Signed-off-by: Yoshikazu Fujikawa <yoshikazu.fujikawa.ue@renesas.com> Signed-off-by: Nobuyuki HIRAI <nobuyuki.hirai.xe@renesas.com> Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com> Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> [damm@opensource.se: Forward ported to upstream, minor fixes] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-10-17 05:46:05 +08:00
config PINCTRL_PFC_R8A7791
def_bool y
depends on ARCH_R8A7791
select PINCTRL_SH_PFC
pinctrl: sh-pfc: Add R8A7792 PFC support Add the PFC support for the R8A7792 SoC including pin groups for some on-chip devices such as SCIF, INTC, and LBSC... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> [geert: s/LSBC/LBSC/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-06-30 05:21:08 +08:00
config PINCTRL_PFC_R8A7792
def_bool y
depends on ARCH_R8A7792
select PINCTRL_SH_PFC
pinctrl: sh-pfc: Enable building of r8a7793 PFC support Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-12 17:13:20 +08:00
config PINCTRL_PFC_R8A7793
def_bool y
depends on ARCH_R8A7793
select PINCTRL_SH_PFC
pinctrl: sh-pfc: add R8A7794 PFC support Add PFC support for the R8A7794 SoC including pin groups for some on-chip devices such as ETH, I2C, INTC, MSIOF, QSPI, [H]SCIF... Sergei: squashed together several patches, fixed the MLB_CLK typo, added IRQ4.. IRQ9 pin groups, fixed IRQn comments, added ETH B pin group names, removed stray new line and fixed typos in the comments in the pinmux_config_regs[] initializer, removed the platform device ID, took into account limited number of signals in the GPIO1/5/6 controllers, added reasonable and removed unreasonable copyrights, modified the bindings document, renamed, added changelog. Changes in version 5: - resolved rejects, refreshed the patch; - added Laurent Pinchart's ACK. Changes in version 4: - reused the PORT_GP_26() macro to #define PORT_GP_28(). Changes in version 3: - removed the platform device ID; - added PORT_GP_26() and PORT_GP_28() macros, used them for GPIO1/5/6 in the CPU_ALL_PORT() macro. Changes in version 2: - rebased the patch. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-06 06:34:48 +08:00
config PINCTRL_PFC_R8A7794
def_bool y
depends on ARCH_R8A7794
select PINCTRL_SH_PFC
pinctrl: sh-pfc: Initial R8A7795 PFC support Add PFC base support for the R8A7795 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [Morimoto-san: updated] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-09-03 10:51:49 +08:00
config PINCTRL_PFC_R8A7795
def_bool y
depends on ARCH_R8A7795
select PINCTRL_SH_PFC
pinctrl: sh-pfc: Initial R8A7796 PFC support This patch adds initial pinctrl driver to support for the R8A7796 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [uli: rebased on top of renesas-drivers] Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-08-18 21:12:32 +08:00
config PINCTRL_PFC_R8A7796
def_bool y
depends on ARCH_R8A7796
select PINCTRL_SH_PFC
pinctrl: sh-pfc: Initial R-Car M3-N support Add initial PFC support for R-Car M3-N (r8a77965) SoC. No groups or functions defined, just pin and registers enumeration. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-20 23:12:07 +08:00
config PINCTRL_PFC_R8A77965
def_bool y
depends on ARCH_R8A77965
select PINCTRL_SH_PFC
pinctrl: sh-pfc: Add R8A77970 PFC support Add the PFC support for the R8A77970 SoC including pin groups for some on-chip devices such as CAN-FD, [H]SCIF, I2C, INTC-EX, MMC, MSIOF, PWM, VIN... Based on the original (and large) patch by Daisuke Matsushita <daisuke.matsushita.ns@hitachi.com>. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Rob Herring <robh@kernel.org> [geert: Drop EtherAVB for now] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-11-11 01:59:01 +08:00
config PINCTRL_PFC_R8A77970
def_bool y
depends on ARCH_R8A77970
select PINCTRL_SH_PFC
pinctrl: sh-pfc: Add R8A77980 PFC support Add the PFC support for the R8A77980 SoC including pin groups for some on-chip devices such as AVB, CAN-FD, GETHER, [H]SCIF, I2C, INTC-EX, MMC, MSIOF, PWM, and VIN... Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-03-09 03:14:32 +08:00
config PINCTRL_PFC_R8A77980
def_bool y
depends on ARCH_R8A77980
select PINCTRL_SH_PFC
pinctrl: sh-pfc: Initial R8A77995 PFC support This patch adds initial pinctrl driver to support for the R8A77995 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> [geert: whitespace] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-08-09 20:19:41 +08:00
config PINCTRL_PFC_R8A77995
def_bool y
depends on ARCH_R8A77995
select PINCTRL_SH_PFC
sh-pfc: Add sh7203 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:29 +08:00
config PINCTRL_PFC_SH7203
def_bool y
depends on CPU_SUBTYPE_SH7203
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
select PINCTRL_SH_PFC_GPIO
sh-pfc: Add sh7203 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:29 +08:00
sh-pfc: Add sh7264 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:30 +08:00
config PINCTRL_PFC_SH7264
def_bool y
depends on CPU_SUBTYPE_SH7264
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
select PINCTRL_SH_PFC_GPIO
sh-pfc: Add sh7264 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:30 +08:00
sh-pfc: Add sh7269 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:31 +08:00
config PINCTRL_PFC_SH7269
def_bool y
depends on CPU_SUBTYPE_SH7269
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
select PINCTRL_SH_PFC_GPIO
sh-pfc: Add sh7269 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:31 +08:00
sh-pfc: Add sh73a0 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:24 +08:00
config PINCTRL_PFC_SH73A0
def_bool y
depends on ARCH_SH73A0
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
select PINCTRL_SH_PFC_GPIO
sh-pfc: sh73a0: Add VCCQ MC0 regulator The sh73a0 has an internal power gate on the VCCQ power supply for the SDHI0 device that is controlled (for some strange reason) by a bit in a PFC register. This feature should be exposed as a regulator. As the same register is also used for pin control purposes there is no way to achieve atomic read/write sequences with a separate regulator driver. We thus need to implement the regulator here. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-22 05:26:26 +08:00
select REGULATOR
sh-pfc: Add sh73a0 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:24 +08:00
sh-pfc: Add sh7720 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:32 +08:00
config PINCTRL_PFC_SH7720
def_bool y
depends on CPU_SUBTYPE_SH7720
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
select PINCTRL_SH_PFC_GPIO
sh-pfc: Add sh7720 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:32 +08:00
sh-pfc: Add sh7722 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:33 +08:00
config PINCTRL_PFC_SH7722
def_bool y
depends on CPU_SUBTYPE_SH7722
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
select PINCTRL_SH_PFC_GPIO
sh-pfc: Add sh7722 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:33 +08:00
sh-pfc: Add sh7723 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:34 +08:00
config PINCTRL_PFC_SH7723
def_bool y
depends on CPU_SUBTYPE_SH7723
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
select PINCTRL_SH_PFC_GPIO
sh-pfc: Add sh7723 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:34 +08:00
sh-pfc: Add sh7724 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:35 +08:00
config PINCTRL_PFC_SH7724
def_bool y
depends on CPU_SUBTYPE_SH7724
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
select PINCTRL_SH_PFC_GPIO
sh-pfc: Add sh7724 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:35 +08:00
sh-pfc: Add sh7734 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:36 +08:00
config PINCTRL_PFC_SH7734
def_bool y
depends on CPU_SUBTYPE_SH7734
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
select PINCTRL_SH_PFC_GPIO
sh-pfc: Add sh7734 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:36 +08:00
sh-pfc: Add sh7757 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:37 +08:00
config PINCTRL_PFC_SH7757
def_bool y
depends on CPU_SUBTYPE_SH7757
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
select PINCTRL_SH_PFC_GPIO
sh-pfc: Add sh7757 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:37 +08:00
sh-pfc: Add sh7785 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:38 +08:00
config PINCTRL_PFC_SH7785
def_bool y
depends on CPU_SUBTYPE_SH7785
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
select PINCTRL_SH_PFC_GPIO
sh-pfc: Add sh7785 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:38 +08:00
sh-pfc: Add sh7786 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:39 +08:00
config PINCTRL_PFC_SH7786
def_bool y
depends on CPU_SUBTYPE_SH7786
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
select PINCTRL_SH_PFC_GPIO
sh-pfc: Add sh7786 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:39 +08:00
sh-pfc: Add shx3 pinmux support Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:40 +08:00
config PINCTRL_PFC_SHX3
def_bool y
depends on CPU_SUBTYPE_SHX3
pinctrl: sh-pfc: Rework PFC GPIO support The sh-pfc pinctrl driver is currently handling SoC-specific PFC hardware blocks on ARM64, ARM and SH architectures. For older SoCs using SH cores and some 32-bit ARM SoCs the PFC hardware also provides GPIO functionality. On the majority of 32-bit ARM SoCs from Renesas and so far all ARM64 SoCs the GPIO feature is provided by separate hardware blocks. So far GPIO support in the PFC driver has been compiled-in for the majority of the SoCs, but with this patch applied the SoCs with PFC support may select from one of the following: - CONFIG_PINCTRL_SH_PFC - Used if PFC lacks GPIO hardware - CONFIG_PINCTRL_SH_PFC_GPIO - Used if PFC includes GPIO support This patch results in the following changes: - The GPIO functionality is only compiled-in on relevant SoCs - The number of lines of code is reduced Build tested using the following configurations: - r8a7795 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM64) - r8a7790 -> CONFIG_PINCTRL_SH_PFC_GPIO=n -> OK (ARM) - r8a7790 + r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - r8a7740 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (ARM) - sh7751 -> CONFIG_PINCTRL_SH_PFC=n -> OK (SH rts7751r2d1) - sh7724 -> CONFIG_PINCTRL_SH_PFC_GPIO=y -> OK (SH ecovec24) Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [geert: s/def_bool n/bool/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-17 16:15:49 +08:00
select PINCTRL_SH_PFC_GPIO
sh-pfc: Move driver from drivers/sh/ to drivers/pinctrl/ Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-12-16 06:51:19 +08:00
endif