2009-05-10 08:17:28 +08:00
|
|
|
/*
|
|
|
|
|
* Driver for the NXP SAA7164 PCIe bridge
|
|
|
|
|
*
|
2015-03-24 03:08:15 +08:00
|
|
|
* Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
|
2009-05-10 08:17:28 +08:00
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
|
* (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
*
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <linux/init.h>
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
|
#include <linux/pci.h>
|
|
|
|
|
#include <linux/delay.h>
|
|
|
|
|
|
|
|
|
|
#include "saa7164.h"
|
|
|
|
|
|
|
|
|
|
/* The Bridge API needs to understand register widths (in bytes) for the
|
|
|
|
|
* attached I2C devices, so we can simplify the virtual i2c mechansms
|
|
|
|
|
* and keep the -i2c.c implementation clean.
|
|
|
|
|
*/
|
2015-03-24 02:45:48 +08:00
|
|
|
#define REGLEN_0bit 0
|
2009-05-10 08:17:28 +08:00
|
|
|
#define REGLEN_8bit 1
|
|
|
|
|
#define REGLEN_16bit 2
|
|
|
|
|
|
|
|
|
|
struct saa7164_board saa7164_boards[] = {
|
|
|
|
|
[SAA7164_BOARD_UNKNOWN] = {
|
|
|
|
|
/* Bridge will not load any firmware, without knowing
|
|
|
|
|
* the rev this would be fatal. */
|
|
|
|
|
.name = "Unknown",
|
|
|
|
|
},
|
|
|
|
|
[SAA7164_BOARD_UNKNOWN_REV2] = {
|
|
|
|
|
/* Bridge will load the v2 f/w and dump descriptors */
|
|
|
|
|
/* Required during new board bringup */
|
|
|
|
|
.name = "Generic Rev2",
|
|
|
|
|
.chiprev = SAA7164_CHIP_REV2,
|
|
|
|
|
},
|
|
|
|
|
[SAA7164_BOARD_UNKNOWN_REV3] = {
|
|
|
|
|
/* Bridge will load the v2 f/w and dump descriptors */
|
|
|
|
|
/* Required during new board bringup */
|
|
|
|
|
.name = "Generic Rev3",
|
|
|
|
|
.chiprev = SAA7164_CHIP_REV3,
|
|
|
|
|
},
|
|
|
|
|
[SAA7164_BOARD_HAUPPAUGE_HVR2200] = {
|
|
|
|
|
.name = "Hauppauge WinTV-HVR2200",
|
|
|
|
|
.porta = SAA7164_MPEG_DVB,
|
|
|
|
|
.portb = SAA7164_MPEG_DVB,
|
2010-08-01 01:44:53 +08:00
|
|
|
.portc = SAA7164_MPEG_ENCODER,
|
|
|
|
|
.portd = SAA7164_MPEG_ENCODER,
|
2010-08-01 03:06:06 +08:00
|
|
|
.porte = SAA7164_MPEG_VBI,
|
|
|
|
|
.portf = SAA7164_MPEG_VBI,
|
2009-05-10 08:17:28 +08:00
|
|
|
.chiprev = SAA7164_CHIP_REV3,
|
|
|
|
|
.unit = {{
|
2009-05-14 12:15:15 +08:00
|
|
|
.id = 0x1d,
|
2009-05-10 08:17:28 +08:00
|
|
|
.type = SAA7164_UNIT_EEPROM,
|
|
|
|
|
.name = "4K EEPROM",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_0,
|
|
|
|
|
.i2c_bus_addr = 0xa0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x04,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "TDA18271-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x1b,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "TDA18271-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x1e,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "TDA10048-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0x10 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x1f,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "TDA10048-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0x12 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
} },
|
|
|
|
|
},
|
|
|
|
|
[SAA7164_BOARD_HAUPPAUGE_HVR2200_2] = {
|
|
|
|
|
.name = "Hauppauge WinTV-HVR2200",
|
|
|
|
|
.porta = SAA7164_MPEG_DVB,
|
|
|
|
|
.portb = SAA7164_MPEG_DVB,
|
2010-08-01 01:44:53 +08:00
|
|
|
.portc = SAA7164_MPEG_ENCODER,
|
|
|
|
|
.portd = SAA7164_MPEG_ENCODER,
|
2010-08-01 03:06:06 +08:00
|
|
|
.porte = SAA7164_MPEG_VBI,
|
|
|
|
|
.portf = SAA7164_MPEG_VBI,
|
2009-05-10 08:17:28 +08:00
|
|
|
.chiprev = SAA7164_CHIP_REV2,
|
|
|
|
|
.unit = {{
|
|
|
|
|
.id = 0x06,
|
|
|
|
|
.type = SAA7164_UNIT_EEPROM,
|
|
|
|
|
.name = "4K EEPROM",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_0,
|
|
|
|
|
.i2c_bus_addr = 0xa0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x04,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "TDA18271-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x05,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "TDA10048-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0x10 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x1e,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "TDA18271-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x1f,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "TDA10048-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0x12 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
} },
|
|
|
|
|
},
|
|
|
|
|
[SAA7164_BOARD_HAUPPAUGE_HVR2200_3] = {
|
|
|
|
|
.name = "Hauppauge WinTV-HVR2200",
|
|
|
|
|
.porta = SAA7164_MPEG_DVB,
|
|
|
|
|
.portb = SAA7164_MPEG_DVB,
|
2010-08-01 01:44:53 +08:00
|
|
|
.portc = SAA7164_MPEG_ENCODER,
|
|
|
|
|
.portd = SAA7164_MPEG_ENCODER,
|
2010-08-01 03:06:06 +08:00
|
|
|
.porte = SAA7164_MPEG_VBI,
|
|
|
|
|
.portf = SAA7164_MPEG_VBI,
|
2009-05-10 08:17:28 +08:00
|
|
|
.chiprev = SAA7164_CHIP_REV2,
|
|
|
|
|
.unit = {{
|
2009-05-14 12:15:15 +08:00
|
|
|
.id = 0x1d,
|
2009-05-10 08:17:28 +08:00
|
|
|
.type = SAA7164_UNIT_EEPROM,
|
|
|
|
|
.name = "4K EEPROM",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_0,
|
|
|
|
|
.i2c_bus_addr = 0xa0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x04,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "TDA18271-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x05,
|
|
|
|
|
.type = SAA7164_UNIT_ANALOG_DEMODULATOR,
|
|
|
|
|
.name = "TDA8290-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0x84 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x1b,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "TDA18271-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x1c,
|
|
|
|
|
.type = SAA7164_UNIT_ANALOG_DEMODULATOR,
|
|
|
|
|
.name = "TDA8290-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0x84 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x1e,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "TDA10048-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0x10 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x1f,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "TDA10048-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0x12 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
} },
|
|
|
|
|
},
|
2011-08-12 11:19:11 +08:00
|
|
|
[SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = {
|
|
|
|
|
.name = "Hauppauge WinTV-HVR2200",
|
|
|
|
|
.porta = SAA7164_MPEG_DVB,
|
|
|
|
|
.portb = SAA7164_MPEG_DVB,
|
|
|
|
|
.portc = SAA7164_MPEG_ENCODER,
|
|
|
|
|
.portd = SAA7164_MPEG_ENCODER,
|
|
|
|
|
.porte = SAA7164_MPEG_VBI,
|
|
|
|
|
.portf = SAA7164_MPEG_VBI,
|
|
|
|
|
.chiprev = SAA7164_CHIP_REV3,
|
|
|
|
|
.unit = {{
|
|
|
|
|
.id = 0x1d,
|
|
|
|
|
.type = SAA7164_UNIT_EEPROM,
|
|
|
|
|
.name = "4K EEPROM",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_0,
|
|
|
|
|
.i2c_bus_addr = 0xa0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x04,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "TDA18271-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x05,
|
|
|
|
|
.type = SAA7164_UNIT_ANALOG_DEMODULATOR,
|
|
|
|
|
.name = "TDA8290-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0x84 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x1b,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "TDA18271-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x1c,
|
|
|
|
|
.type = SAA7164_UNIT_ANALOG_DEMODULATOR,
|
|
|
|
|
.name = "TDA8290-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0x84 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x1e,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "TDA10048-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0x10 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x1f,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "TDA10048-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0x12 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
} },
|
|
|
|
|
},
|
2009-05-10 08:17:28 +08:00
|
|
|
[SAA7164_BOARD_HAUPPAUGE_HVR2250] = {
|
|
|
|
|
.name = "Hauppauge WinTV-HVR2250",
|
|
|
|
|
.porta = SAA7164_MPEG_DVB,
|
|
|
|
|
.portb = SAA7164_MPEG_DVB,
|
2010-08-01 01:44:53 +08:00
|
|
|
.portc = SAA7164_MPEG_ENCODER,
|
|
|
|
|
.portd = SAA7164_MPEG_ENCODER,
|
2010-08-01 03:06:06 +08:00
|
|
|
.porte = SAA7164_MPEG_VBI,
|
|
|
|
|
.portf = SAA7164_MPEG_VBI,
|
2009-05-10 08:17:28 +08:00
|
|
|
.chiprev = SAA7164_CHIP_REV3,
|
|
|
|
|
.unit = {{
|
|
|
|
|
.id = 0x22,
|
|
|
|
|
.type = SAA7164_UNIT_EEPROM,
|
|
|
|
|
.name = "4K EEPROM",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_0,
|
|
|
|
|
.i2c_bus_addr = 0xa0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x04,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "TDA18271-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x07,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "CX24228/S5H1411-1 (TOP)",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0x32 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x08,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "CX24228/S5H1411-1 (QAM)",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0x34 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x1e,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "TDA18271-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x20,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "CX24228/S5H1411-2 (TOP)",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0x32 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x23,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "CX24228/S5H1411-2 (QAM)",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0x34 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
} },
|
|
|
|
|
},
|
|
|
|
|
[SAA7164_BOARD_HAUPPAUGE_HVR2250_2] = {
|
|
|
|
|
.name = "Hauppauge WinTV-HVR2250",
|
|
|
|
|
.porta = SAA7164_MPEG_DVB,
|
|
|
|
|
.portb = SAA7164_MPEG_DVB,
|
2010-08-01 01:44:53 +08:00
|
|
|
.portc = SAA7164_MPEG_ENCODER,
|
|
|
|
|
.portd = SAA7164_MPEG_ENCODER,
|
2010-08-01 03:06:06 +08:00
|
|
|
.porte = SAA7164_MPEG_VBI,
|
|
|
|
|
.portf = SAA7164_MPEG_VBI,
|
2009-05-10 08:17:28 +08:00
|
|
|
.chiprev = SAA7164_CHIP_REV3,
|
|
|
|
|
.unit = {{
|
2009-05-14 12:15:15 +08:00
|
|
|
.id = 0x28,
|
2009-05-10 08:17:28 +08:00
|
|
|
.type = SAA7164_UNIT_EEPROM,
|
|
|
|
|
.name = "4K EEPROM",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_0,
|
|
|
|
|
.i2c_bus_addr = 0xa0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x04,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "TDA18271-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x07,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "CX24228/S5H1411-1 (TOP)",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0x32 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x08,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "CX24228/S5H1411-1 (QAM)",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0x34 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x24,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "TDA18271-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x26,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "CX24228/S5H1411-2 (TOP)",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0x32 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x29,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "CX24228/S5H1411-2 (QAM)",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0x34 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
} },
|
|
|
|
|
},
|
2009-05-12 09:03:07 +08:00
|
|
|
[SAA7164_BOARD_HAUPPAUGE_HVR2250_3] = {
|
|
|
|
|
.name = "Hauppauge WinTV-HVR2250",
|
|
|
|
|
.porta = SAA7164_MPEG_DVB,
|
|
|
|
|
.portb = SAA7164_MPEG_DVB,
|
2010-08-01 01:44:53 +08:00
|
|
|
.portc = SAA7164_MPEG_ENCODER,
|
|
|
|
|
.portd = SAA7164_MPEG_ENCODER,
|
2010-08-01 03:06:06 +08:00
|
|
|
.porte = SAA7164_MPEG_VBI,
|
|
|
|
|
.portf = SAA7164_MPEG_VBI,
|
2009-05-12 09:03:07 +08:00
|
|
|
.chiprev = SAA7164_CHIP_REV3,
|
|
|
|
|
.unit = {{
|
2009-05-14 12:15:15 +08:00
|
|
|
.id = 0x26,
|
2009-05-12 09:03:07 +08:00
|
|
|
.type = SAA7164_UNIT_EEPROM,
|
|
|
|
|
.name = "4K EEPROM",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_0,
|
|
|
|
|
.i2c_bus_addr = 0xa0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x04,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "TDA18271-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x07,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "CX24228/S5H1411-1 (TOP)",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0x32 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x08,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "CX24228/S5H1411-1 (QAM)",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0x34 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x22,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "TDA18271-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x24,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "CX24228/S5H1411-2 (TOP)",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0x32 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x27,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "CX24228/S5H1411-2 (QAM)",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0x34 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
} },
|
|
|
|
|
},
|
2011-09-10 02:35:20 +08:00
|
|
|
[SAA7164_BOARD_HAUPPAUGE_HVR2200_5] = {
|
|
|
|
|
.name = "Hauppauge WinTV-HVR2200",
|
|
|
|
|
.porta = SAA7164_MPEG_DVB,
|
|
|
|
|
.portb = SAA7164_MPEG_DVB,
|
|
|
|
|
.chiprev = SAA7164_CHIP_REV3,
|
|
|
|
|
.unit = {{
|
|
|
|
|
.id = 0x23,
|
|
|
|
|
.type = SAA7164_UNIT_EEPROM,
|
|
|
|
|
.name = "4K EEPROM",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_0,
|
|
|
|
|
.i2c_bus_addr = 0xa0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x04,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "TDA18271-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x05,
|
|
|
|
|
.type = SAA7164_UNIT_ANALOG_DEMODULATOR,
|
|
|
|
|
.name = "TDA8290-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0x84 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x21,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "TDA18271-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x22,
|
|
|
|
|
.type = SAA7164_UNIT_ANALOG_DEMODULATOR,
|
|
|
|
|
.name = "TDA8290-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0x84 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x24,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "TDA10048-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0x10 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x25,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "TDA10048-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0x12 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
} },
|
|
|
|
|
},
|
2015-03-24 02:45:48 +08:00
|
|
|
[SAA7164_BOARD_HAUPPAUGE_HVR2255proto] = {
|
|
|
|
|
.name = "Hauppauge WinTV-HVR2255(proto)",
|
|
|
|
|
.porta = SAA7164_MPEG_DVB,
|
|
|
|
|
.portb = SAA7164_MPEG_DVB,
|
|
|
|
|
.portc = SAA7164_MPEG_ENCODER,
|
|
|
|
|
.portd = SAA7164_MPEG_ENCODER,
|
|
|
|
|
.porte = SAA7164_MPEG_VBI,
|
|
|
|
|
.portf = SAA7164_MPEG_VBI,
|
|
|
|
|
.chiprev = SAA7164_CHIP_REV3,
|
|
|
|
|
.unit = {{
|
|
|
|
|
.id = 0x27,
|
|
|
|
|
.type = SAA7164_UNIT_EEPROM,
|
|
|
|
|
.name = "4K EEPROM",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_0,
|
|
|
|
|
.i2c_bus_addr = 0xa0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x04,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "SI2157-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_0,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_0bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x06,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "LGDT3306",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0xb2 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x24,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "SI2157-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_0bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x26,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "LGDT3306-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0x1c >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
} },
|
|
|
|
|
},
|
|
|
|
|
[SAA7164_BOARD_HAUPPAUGE_HVR2255] = {
|
|
|
|
|
.name = "Hauppauge WinTV-HVR2255",
|
|
|
|
|
.porta = SAA7164_MPEG_DVB,
|
|
|
|
|
.portb = SAA7164_MPEG_DVB,
|
|
|
|
|
.portc = SAA7164_MPEG_ENCODER,
|
|
|
|
|
.portd = SAA7164_MPEG_ENCODER,
|
|
|
|
|
.porte = SAA7164_MPEG_VBI,
|
|
|
|
|
.portf = SAA7164_MPEG_VBI,
|
|
|
|
|
.chiprev = SAA7164_CHIP_REV3,
|
|
|
|
|
.unit = {{
|
|
|
|
|
.id = 0x28,
|
|
|
|
|
.type = SAA7164_UNIT_EEPROM,
|
|
|
|
|
.name = "4K EEPROM",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_0,
|
|
|
|
|
.i2c_bus_addr = 0xa0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x04,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "SI2157-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_0,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_0bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x06,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "LGDT3306-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0xb2 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x25,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "SI2157-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_0bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x27,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "LGDT3306-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0x1c >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
} },
|
|
|
|
|
},
|
|
|
|
|
[SAA7164_BOARD_HAUPPAUGE_HVR2205] = {
|
|
|
|
|
.name = "Hauppauge WinTV-HVR2205",
|
|
|
|
|
.porta = SAA7164_MPEG_DVB,
|
|
|
|
|
.portb = SAA7164_MPEG_DVB,
|
|
|
|
|
.portc = SAA7164_MPEG_ENCODER,
|
|
|
|
|
.portd = SAA7164_MPEG_ENCODER,
|
|
|
|
|
.porte = SAA7164_MPEG_VBI,
|
|
|
|
|
.portf = SAA7164_MPEG_VBI,
|
|
|
|
|
.chiprev = SAA7164_CHIP_REV3,
|
|
|
|
|
.unit = {{
|
|
|
|
|
.id = 0x28,
|
|
|
|
|
.type = SAA7164_UNIT_EEPROM,
|
|
|
|
|
.name = "4K EEPROM",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_0,
|
|
|
|
|
.i2c_bus_addr = 0xa0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_8bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x04,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "SI2157-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_0,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_0bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x06,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "SI2168-1",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0xc8 >> 1,
|
2015-06-06 15:44:57 +08:00
|
|
|
.i2c_reg_len = REGLEN_0bit,
|
2015-03-24 02:45:48 +08:00
|
|
|
}, {
|
|
|
|
|
.id = 0x25,
|
|
|
|
|
.type = SAA7164_UNIT_TUNER,
|
|
|
|
|
.name = "SI2157-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_1,
|
|
|
|
|
.i2c_bus_addr = 0xc0 >> 1,
|
|
|
|
|
.i2c_reg_len = REGLEN_0bit,
|
|
|
|
|
}, {
|
|
|
|
|
.id = 0x27,
|
|
|
|
|
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
|
|
|
|
|
.name = "SI2168-2",
|
|
|
|
|
.i2c_bus_nr = SAA7164_I2C_BUS_2,
|
|
|
|
|
.i2c_bus_addr = 0xcc >> 1,
|
2015-06-06 15:44:57 +08:00
|
|
|
.i2c_reg_len = REGLEN_0bit,
|
2015-03-24 02:45:48 +08:00
|
|
|
} },
|
|
|
|
|
},
|
2009-05-10 08:17:28 +08:00
|
|
|
};
|
|
|
|
|
const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards);
|
|
|
|
|
|
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
|
/* PCI subsystem IDs */
|
|
|
|
|
|
|
|
|
|
struct saa7164_subid saa7164_subids[] = {
|
|
|
|
|
{
|
|
|
|
|
.subvendor = 0x0070,
|
|
|
|
|
.subdevice = 0x8880,
|
|
|
|
|
.card = SAA7164_BOARD_HAUPPAUGE_HVR2250,
|
|
|
|
|
}, {
|
|
|
|
|
.subvendor = 0x0070,
|
|
|
|
|
.subdevice = 0x8810,
|
|
|
|
|
.card = SAA7164_BOARD_HAUPPAUGE_HVR2250,
|
|
|
|
|
}, {
|
|
|
|
|
.subvendor = 0x0070,
|
|
|
|
|
.subdevice = 0x8980,
|
|
|
|
|
.card = SAA7164_BOARD_HAUPPAUGE_HVR2200,
|
|
|
|
|
}, {
|
|
|
|
|
.subvendor = 0x0070,
|
|
|
|
|
.subdevice = 0x8900,
|
|
|
|
|
.card = SAA7164_BOARD_HAUPPAUGE_HVR2200_2,
|
|
|
|
|
}, {
|
|
|
|
|
.subvendor = 0x0070,
|
|
|
|
|
.subdevice = 0x8901,
|
|
|
|
|
.card = SAA7164_BOARD_HAUPPAUGE_HVR2200_3,
|
|
|
|
|
}, {
|
|
|
|
|
.subvendor = 0x0070,
|
|
|
|
|
.subdevice = 0x88A1,
|
2009-05-12 09:03:07 +08:00
|
|
|
.card = SAA7164_BOARD_HAUPPAUGE_HVR2250_3,
|
2009-05-10 08:17:28 +08:00
|
|
|
}, {
|
|
|
|
|
.subvendor = 0x0070,
|
|
|
|
|
.subdevice = 0x8891,
|
|
|
|
|
.card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
|
2009-09-04 10:46:16 +08:00
|
|
|
}, {
|
|
|
|
|
.subvendor = 0x0070,
|
|
|
|
|
.subdevice = 0x8851,
|
|
|
|
|
.card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
|
2011-08-12 11:19:11 +08:00
|
|
|
}, {
|
|
|
|
|
.subvendor = 0x0070,
|
|
|
|
|
.subdevice = 0x8940,
|
|
|
|
|
.card = SAA7164_BOARD_HAUPPAUGE_HVR2200_4,
|
2011-09-10 02:35:20 +08:00
|
|
|
}, {
|
|
|
|
|
.subvendor = 0x0070,
|
|
|
|
|
.subdevice = 0x8953,
|
|
|
|
|
.card = SAA7164_BOARD_HAUPPAUGE_HVR2200_5,
|
2015-03-24 02:45:48 +08:00
|
|
|
}, {
|
|
|
|
|
.subvendor = 0x0070,
|
|
|
|
|
.subdevice = 0xf111,
|
|
|
|
|
.card = SAA7164_BOARD_HAUPPAUGE_HVR2255,
|
|
|
|
|
/* Prototype card left here for documenation purposes.
|
|
|
|
|
.card = SAA7164_BOARD_HAUPPAUGE_HVR2255proto,
|
|
|
|
|
*/
|
|
|
|
|
}, {
|
|
|
|
|
.subvendor = 0x0070,
|
|
|
|
|
.subdevice = 0xf123,
|
|
|
|
|
.card = SAA7164_BOARD_HAUPPAUGE_HVR2205,
|
|
|
|
|
}, {
|
|
|
|
|
.subvendor = 0x0070,
|
|
|
|
|
.subdevice = 0xf120,
|
|
|
|
|
.card = SAA7164_BOARD_HAUPPAUGE_HVR2205,
|
2009-05-10 08:17:28 +08:00
|
|
|
},
|
|
|
|
|
};
|
|
|
|
|
const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
|
|
|
|
|
|
|
|
|
|
void saa7164_card_list(struct saa7164_dev *dev)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
if (0 == dev->pci->subsystem_vendor &&
|
|
|
|
|
0 == dev->pci->subsystem_device) {
|
|
|
|
|
printk(KERN_ERR
|
|
|
|
|
"%s: Board has no valid PCIe Subsystem ID and can't\n"
|
|
|
|
|
"%s: be autodetected. Pass card=<n> insmod option to\n"
|
|
|
|
|
"%s: workaround that. Send complaints to the vendor\n"
|
|
|
|
|
"%s: of the TV card. Best regards,\n"
|
|
|
|
|
"%s: -- tux\n",
|
|
|
|
|
dev->name, dev->name, dev->name, dev->name, dev->name);
|
|
|
|
|
} else {
|
|
|
|
|
printk(KERN_ERR
|
|
|
|
|
"%s: Your board isn't known (yet) to the driver.\n"
|
|
|
|
|
"%s: Try to pick one of the existing card configs via\n"
|
|
|
|
|
"%s: card=<n> insmod option. Updating to the latest\n"
|
|
|
|
|
"%s: version might help as well.\n",
|
|
|
|
|
dev->name, dev->name, dev->name, dev->name);
|
|
|
|
|
}
|
|
|
|
|
|
[media] saa7164: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-19 03:44:07 +08:00
|
|
|
printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod option:\n",
|
|
|
|
|
dev->name);
|
2009-05-10 08:17:28 +08:00
|
|
|
|
|
|
|
|
for (i = 0; i < saa7164_bcount; i++)
|
|
|
|
|
printk(KERN_ERR "%s: card=%d -> %s\n",
|
|
|
|
|
dev->name, i, saa7164_boards[i].name);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* TODO: clean this define up into the -cards.c structs */
|
|
|
|
|
#define PCIEBRIDGE_UNITID 2
|
|
|
|
|
|
|
|
|
|
void saa7164_gpio_setup(struct saa7164_dev *dev)
|
|
|
|
|
{
|
|
|
|
|
switch (dev->board) {
|
|
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2200:
|
|
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
|
|
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
|
2011-08-12 11:19:11 +08:00
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
|
2011-09-10 02:35:20 +08:00
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
|
2009-05-10 08:17:28 +08:00
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
|
|
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
|
2009-05-12 09:03:07 +08:00
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
|
2015-03-24 02:45:48 +08:00
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2255proto:
|
|
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2255:
|
|
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2205:
|
2009-05-10 08:17:28 +08:00
|
|
|
/*
|
2015-03-24 02:45:48 +08:00
|
|
|
HVR2200 / HVR2250
|
2009-05-10 08:17:28 +08:00
|
|
|
GPIO 2: s5h1411 / tda10048-1 demod reset
|
|
|
|
|
GPIO 3: s5h1411 / tda10048-2 demod reset
|
|
|
|
|
GPIO 7: IRBlaster Zilog reset
|
|
|
|
|
*/
|
|
|
|
|
|
2015-03-24 02:45:48 +08:00
|
|
|
/* HVR2255
|
|
|
|
|
* GPIO 2: lgdg3306-1 demod reset
|
|
|
|
|
* GPIO 3: lgdt3306-2 demod reset
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* HVR2205
|
|
|
|
|
* GPIO 2: si2168-1 demod reset
|
|
|
|
|
* GPIO 3: si2168-2 demod reset
|
|
|
|
|
*/
|
|
|
|
|
|
2009-05-10 08:17:28 +08:00
|
|
|
/* Reset parts by going in and out of reset */
|
|
|
|
|
saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
|
|
|
|
|
saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
|
|
|
|
|
|
2010-11-13 05:32:36 +08:00
|
|
|
msleep(20);
|
2009-05-10 08:17:28 +08:00
|
|
|
|
|
|
|
|
saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
|
|
|
|
|
saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void hauppauge_eeprom(struct saa7164_dev *dev, u8 *eeprom_data)
|
|
|
|
|
{
|
|
|
|
|
struct tveeprom tv;
|
|
|
|
|
|
2017-03-03 18:28:29 +08:00
|
|
|
tveeprom_hauppauge_analog(&tv, eeprom_data);
|
2009-05-10 08:17:28 +08:00
|
|
|
|
|
|
|
|
/* Make sure we support the board model */
|
|
|
|
|
switch (tv.model) {
|
|
|
|
|
case 88001:
|
|
|
|
|
/* Development board - Limit circulation */
|
|
|
|
|
/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
|
|
|
|
|
* ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */
|
|
|
|
|
case 88021:
|
|
|
|
|
/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
|
|
|
|
|
* ATSC/QAM (TDA18271/S5H1411) and basic analog, MCE CIR, FM */
|
|
|
|
|
break;
|
|
|
|
|
case 88041:
|
|
|
|
|
/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
|
|
|
|
|
* ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */
|
|
|
|
|
break;
|
|
|
|
|
case 88061:
|
|
|
|
|
/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
|
|
|
|
|
* ATSC/QAM (TDA18271/S5H1411) and basic analog, FM */
|
|
|
|
|
break;
|
|
|
|
|
case 89519:
|
|
|
|
|
case 89609:
|
|
|
|
|
/* WinTV-HVR2200 (PCIe, Retail, full-height)
|
|
|
|
|
* DVB-T (TDA18271/TDA10048) and basic analog, no IR */
|
|
|
|
|
break;
|
|
|
|
|
case 89619:
|
|
|
|
|
/* WinTV-HVR2200 (PCIe, Retail, half-height)
|
|
|
|
|
* DVB-T (TDA18271/TDA10048) and basic analog, no IR */
|
|
|
|
|
break;
|
2015-03-24 02:45:48 +08:00
|
|
|
case 151009:
|
|
|
|
|
/* First production board rev B2I6 */
|
|
|
|
|
/* WinTV-HVR2205 (PCIe, Retail, full-height bracket)
|
|
|
|
|
* DVB-T/T2/C (SI2157/SI2168) and basic analog, FM */
|
|
|
|
|
break;
|
|
|
|
|
case 151609:
|
|
|
|
|
/* First production board rev B2I6 */
|
|
|
|
|
/* WinTV-HVR2205 (PCIe, Retail, half-height bracket)
|
|
|
|
|
* DVB-T/T2/C (SI2157/SI2168) and basic analog, FM */
|
|
|
|
|
break;
|
|
|
|
|
case 151061:
|
|
|
|
|
/* First production board rev B1I6 */
|
|
|
|
|
/* WinTV-HVR2255 (PCIe, Retail, full-height bracket)
|
|
|
|
|
* ATSC/QAM (SI2157/LGDT3306) and basic analog, FM */
|
|
|
|
|
break;
|
2009-05-10 08:17:28 +08:00
|
|
|
default:
|
|
|
|
|
printk(KERN_ERR "%s: Warning: Unknown Hauppauge model #%d\n",
|
|
|
|
|
dev->name, tv.model);
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
printk(KERN_INFO "%s: Hauppauge eeprom: model=%d\n", dev->name,
|
|
|
|
|
tv.model);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void saa7164_card_setup(struct saa7164_dev *dev)
|
|
|
|
|
{
|
|
|
|
|
static u8 eeprom[256];
|
|
|
|
|
|
|
|
|
|
if (dev->i2c_bus[0].i2c_rc == 0) {
|
|
|
|
|
if (saa7164_api_read_eeprom(dev, &eeprom[0],
|
|
|
|
|
sizeof(eeprom)) < 0)
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
switch (dev->board) {
|
|
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2200:
|
|
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
|
|
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
|
2011-08-12 11:19:11 +08:00
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
|
2011-09-10 02:35:20 +08:00
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
|
2009-05-10 08:17:28 +08:00
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
|
2009-05-13 03:20:37 +08:00
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
|
2009-05-12 09:03:07 +08:00
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
|
2015-03-24 02:45:48 +08:00
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2255proto:
|
|
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2255:
|
|
|
|
|
case SAA7164_BOARD_HAUPPAUGE_HVR2205:
|
2009-05-10 08:17:28 +08:00
|
|
|
hauppauge_eeprom(dev, &eeprom[0]);
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* With most other drivers, the kernel expects to communicate with subdrivers
|
|
|
|
|
* through i2c. This bridge does not allow that, it does not expose any direct
|
|
|
|
|
* access to I2C. Instead we have to communicate through the device f/w for
|
|
|
|
|
* register access to 'processing units'. Each unit has a unique
|
|
|
|
|
* id, regardless of how the physical implementation occurs across
|
|
|
|
|
* the three physical i2c busses. The being said if we want leverge of
|
|
|
|
|
* the existing kernel drivers for tuners and demods we have to 'speak i2c',
|
|
|
|
|
* to this bridge implements 3 virtual i2c buses. This is a helper function
|
|
|
|
|
* for those.
|
|
|
|
|
*
|
|
|
|
|
* Description: Translate the kernels notion of an i2c address and bus into
|
|
|
|
|
* the appropriate unitid.
|
|
|
|
|
*/
|
|
|
|
|
int saa7164_i2caddr_to_unitid(struct saa7164_i2c *bus, int addr)
|
|
|
|
|
{
|
|
|
|
|
/* For a given bus and i2c device address, return the saa7164 unique
|
|
|
|
|
* unitid. < 0 on error */
|
|
|
|
|
|
|
|
|
|
struct saa7164_dev *dev = bus->dev;
|
|
|
|
|
struct saa7164_unit *unit;
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < SAA7164_MAX_UNITS; i++) {
|
|
|
|
|
unit = &saa7164_boards[dev->board].unit[i];
|
|
|
|
|
|
|
|
|
|
if (unit->type == SAA7164_UNIT_UNDEFINED)
|
|
|
|
|
continue;
|
|
|
|
|
if ((bus->nr == unit->i2c_bus_nr) &&
|
|
|
|
|
(addr == unit->i2c_bus_addr))
|
|
|
|
|
return unit->id;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* The 7164 API needs to know the i2c register length in advance.
|
|
|
|
|
* this is a helper function. Based on a specific chip addr and bus return the
|
|
|
|
|
* reg length.
|
|
|
|
|
*/
|
|
|
|
|
int saa7164_i2caddr_to_reglen(struct saa7164_i2c *bus, int addr)
|
|
|
|
|
{
|
|
|
|
|
/* For a given bus and i2c device address, return the
|
|
|
|
|
* saa7164 registry address width. < 0 on error
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
struct saa7164_dev *dev = bus->dev;
|
|
|
|
|
struct saa7164_unit *unit;
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < SAA7164_MAX_UNITS; i++) {
|
|
|
|
|
unit = &saa7164_boards[dev->board].unit[i];
|
|
|
|
|
|
|
|
|
|
if (unit->type == SAA7164_UNIT_UNDEFINED)
|
|
|
|
|
continue;
|
|
|
|
|
|
|
|
|
|
if ((bus->nr == unit->i2c_bus_nr) &&
|
|
|
|
|
(addr == unit->i2c_bus_addr))
|
|
|
|
|
return unit->i2c_reg_len;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
/* TODO: implement a 'findeeprom' functio like the above and fix any other
|
|
|
|
|
* eeprom related todo's in -api.c.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* Translate a unitid into a x readable device name, for display purposes. */
|
|
|
|
|
char *saa7164_unitid_name(struct saa7164_dev *dev, u8 unitid)
|
|
|
|
|
{
|
|
|
|
|
char *undefed = "UNDEFINED";
|
|
|
|
|
char *bridge = "BRIDGE";
|
|
|
|
|
struct saa7164_unit *unit;
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
if (unitid == 0)
|
|
|
|
|
return bridge;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < SAA7164_MAX_UNITS; i++) {
|
|
|
|
|
unit = &saa7164_boards[dev->board].unit[i];
|
|
|
|
|
|
|
|
|
|
if (unit->type == SAA7164_UNIT_UNDEFINED)
|
|
|
|
|
continue;
|
|
|
|
|
|
|
|
|
|
if (unitid == unit->id)
|
|
|
|
|
return unit->name;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return undefed;
|
|
|
|
|
}
|
|
|
|
|
|