linux/sound/soc/codecs/wm8962.c

3786 lines
116 KiB
C
Raw Normal View History

/*
* wm8962.c -- WM8962 ALSA SoC Audio driver
*
* Copyright 2010 Wolfson Microelectronics plc
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/gcd.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <sound/core.h>
#include <sound/jack.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/initval.h>
#include <sound/tlv.h>
#include <sound/wm8962.h>
#include <trace/events/asoc.h>
#include "wm8962.h"
#define WM8962_NUM_SUPPLIES 8
static const char *wm8962_supply_names[WM8962_NUM_SUPPLIES] = {
"DCVDD",
"DBVDD",
"AVDD",
"CPVDD",
"MICVDD",
"PLLVDD",
"SPKVDD1",
"SPKVDD2",
};
/* codec private data */
struct wm8962_priv {
struct regmap *regmap;
struct snd_soc_codec *codec;
int sysclk;
int sysclk_rate;
int bclk; /* Desired BCLK */
int lrclk;
struct completion fll_lock;
int fll_src;
int fll_fref;
int fll_fout;
u16 dsp2_ena;
struct delayed_work mic_work;
struct snd_soc_jack *jack;
struct regulator_bulk_data supplies[WM8962_NUM_SUPPLIES];
struct notifier_block disable_nb[WM8962_NUM_SUPPLIES];
#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
struct input_dev *beep;
struct work_struct beep_work;
int beep_rate;
#endif
#ifdef CONFIG_GPIOLIB
struct gpio_chip gpio_chip;
#endif
int irq;
};
/* We can't use the same notifier block for more than one supply and
* there's no way I can see to get from a callback to the caller
* except container_of().
*/
#define WM8962_REGULATOR_EVENT(n) \
static int wm8962_regulator_event_##n(struct notifier_block *nb, \
unsigned long event, void *data) \
{ \
struct wm8962_priv *wm8962 = container_of(nb, struct wm8962_priv, \
disable_nb[n]); \
if (event & REGULATOR_EVENT_DISABLE) { \
regcache_mark_dirty(wm8962->regmap); \
} \
return 0; \
}
WM8962_REGULATOR_EVENT(0)
WM8962_REGULATOR_EVENT(1)
WM8962_REGULATOR_EVENT(2)
WM8962_REGULATOR_EVENT(3)
WM8962_REGULATOR_EVENT(4)
WM8962_REGULATOR_EVENT(5)
WM8962_REGULATOR_EVENT(6)
WM8962_REGULATOR_EVENT(7)
static struct reg_default wm8962_reg[] = {
{ 0, 0x009F }, /* R0 - Left Input volume */
{ 1, 0x049F }, /* R1 - Right Input volume */
{ 2, 0x0000 }, /* R2 - HPOUTL volume */
{ 3, 0x0000 }, /* R3 - HPOUTR volume */
{ 4, 0x0020 }, /* R4 - Clocking1 */
{ 5, 0x0018 }, /* R5 - ADC & DAC Control 1 */
{ 6, 0x2008 }, /* R6 - ADC & DAC Control 2 */
{ 7, 0x000A }, /* R7 - Audio Interface 0 */
{ 8, 0x01E4 }, /* R8 - Clocking2 */
{ 9, 0x0300 }, /* R9 - Audio Interface 1 */
{ 10, 0x00C0 }, /* R10 - Left DAC volume */
{ 11, 0x00C0 }, /* R11 - Right DAC volume */
{ 14, 0x0040 }, /* R14 - Audio Interface 2 */
{ 15, 0x6243 }, /* R15 - Software Reset */
{ 17, 0x007B }, /* R17 - ALC1 */
{ 18, 0x0000 }, /* R18 - ALC2 */
{ 19, 0x1C32 }, /* R19 - ALC3 */
{ 20, 0x3200 }, /* R20 - Noise Gate */
{ 21, 0x00C0 }, /* R21 - Left ADC volume */
{ 22, 0x00C0 }, /* R22 - Right ADC volume */
{ 23, 0x0160 }, /* R23 - Additional control(1) */
{ 24, 0x0000 }, /* R24 - Additional control(2) */
{ 25, 0x0000 }, /* R25 - Pwr Mgmt (1) */
{ 26, 0x0000 }, /* R26 - Pwr Mgmt (2) */
{ 27, 0x0010 }, /* R27 - Additional Control (3) */
{ 28, 0x0000 }, /* R28 - Anti-pop */
{ 30, 0x005E }, /* R30 - Clocking 3 */
{ 31, 0x0000 }, /* R31 - Input mixer control (1) */
{ 32, 0x0145 }, /* R32 - Left input mixer volume */
{ 33, 0x0145 }, /* R33 - Right input mixer volume */
{ 34, 0x0009 }, /* R34 - Input mixer control (2) */
{ 35, 0x0003 }, /* R35 - Input bias control */
{ 37, 0x0008 }, /* R37 - Left input PGA control */
{ 38, 0x0008 }, /* R38 - Right input PGA control */
{ 40, 0x0000 }, /* R40 - SPKOUTL volume */
{ 41, 0x0000 }, /* R41 - SPKOUTR volume */
{ 47, 0x0000 }, /* R47 - Thermal Shutdown Status */
{ 48, 0x8027 }, /* R48 - Additional Control (4) */
{ 49, 0x0010 }, /* R49 - Class D Control 1 */
{ 51, 0x0003 }, /* R51 - Class D Control 2 */
{ 56, 0x0506 }, /* R56 - Clocking 4 */
{ 57, 0x0000 }, /* R57 - DAC DSP Mixing (1) */
{ 58, 0x0000 }, /* R58 - DAC DSP Mixing (2) */
{ 60, 0x0300 }, /* R60 - DC Servo 0 */
{ 61, 0x0300 }, /* R61 - DC Servo 1 */
{ 64, 0x0810 }, /* R64 - DC Servo 4 */
{ 66, 0x0000 }, /* R66 - DC Servo 6 */
{ 68, 0x001B }, /* R68 - Analogue PGA Bias */
{ 69, 0x0000 }, /* R69 - Analogue HP 0 */
{ 71, 0x01FB }, /* R71 - Analogue HP 2 */
{ 72, 0x0000 }, /* R72 - Charge Pump 1 */
{ 82, 0x0004 }, /* R82 - Charge Pump B */
{ 87, 0x0000 }, /* R87 - Write Sequencer Control 1 */
{ 90, 0x0000 }, /* R90 - Write Sequencer Control 2 */
{ 93, 0x0000 }, /* R93 - Write Sequencer Control 3 */
{ 94, 0x0000 }, /* R94 - Control Interface */
{ 99, 0x0000 }, /* R99 - Mixer Enables */
{ 100, 0x0000 }, /* R100 - Headphone Mixer (1) */
{ 101, 0x0000 }, /* R101 - Headphone Mixer (2) */
{ 102, 0x013F }, /* R102 - Headphone Mixer (3) */
{ 103, 0x013F }, /* R103 - Headphone Mixer (4) */
{ 105, 0x0000 }, /* R105 - Speaker Mixer (1) */
{ 106, 0x0000 }, /* R106 - Speaker Mixer (2) */
{ 107, 0x013F }, /* R107 - Speaker Mixer (3) */
{ 108, 0x013F }, /* R108 - Speaker Mixer (4) */
{ 109, 0x0003 }, /* R109 - Speaker Mixer (5) */
{ 110, 0x0002 }, /* R110 - Beep Generator (1) */
{ 115, 0x0006 }, /* R115 - Oscillator Trim (3) */
{ 116, 0x0026 }, /* R116 - Oscillator Trim (4) */
{ 119, 0x0000 }, /* R119 - Oscillator Trim (7) */
{ 124, 0x0011 }, /* R124 - Analogue Clocking1 */
{ 125, 0x004B }, /* R125 - Analogue Clocking2 */
{ 126, 0x000D }, /* R126 - Analogue Clocking3 */
{ 127, 0x0000 }, /* R127 - PLL Software Reset */
{ 129, 0x0000 }, /* R129 - PLL2 */
{ 131, 0x0000 }, /* R131 - PLL 4 */
{ 136, 0x0067 }, /* R136 - PLL 9 */
{ 137, 0x001C }, /* R137 - PLL 10 */
{ 138, 0x0071 }, /* R138 - PLL 11 */
{ 139, 0x00C7 }, /* R139 - PLL 12 */
{ 140, 0x0067 }, /* R140 - PLL 13 */
{ 141, 0x0048 }, /* R141 - PLL 14 */
{ 142, 0x0022 }, /* R142 - PLL 15 */
{ 143, 0x0097 }, /* R143 - PLL 16 */
{ 155, 0x000C }, /* R155 - FLL Control (1) */
{ 156, 0x0039 }, /* R156 - FLL Control (2) */
{ 157, 0x0180 }, /* R157 - FLL Control (3) */
{ 159, 0x0032 }, /* R159 - FLL Control (5) */
{ 160, 0x0018 }, /* R160 - FLL Control (6) */
{ 161, 0x007D }, /* R161 - FLL Control (7) */
{ 162, 0x0008 }, /* R162 - FLL Control (8) */
{ 252, 0x0005 }, /* R252 - General test 1 */
{ 256, 0x0000 }, /* R256 - DF1 */
{ 257, 0x0000 }, /* R257 - DF2 */
{ 258, 0x0000 }, /* R258 - DF3 */
{ 259, 0x0000 }, /* R259 - DF4 */
{ 260, 0x0000 }, /* R260 - DF5 */
{ 261, 0x0000 }, /* R261 - DF6 */
{ 262, 0x0000 }, /* R262 - DF7 */
{ 264, 0x0000 }, /* R264 - LHPF1 */
{ 265, 0x0000 }, /* R265 - LHPF2 */
{ 268, 0x0000 }, /* R268 - THREED1 */
{ 269, 0x0000 }, /* R269 - THREED2 */
{ 270, 0x0000 }, /* R270 - THREED3 */
{ 271, 0x0000 }, /* R271 - THREED4 */
{ 276, 0x000C }, /* R276 - DRC 1 */
{ 277, 0x0925 }, /* R277 - DRC 2 */
{ 278, 0x0000 }, /* R278 - DRC 3 */
{ 279, 0x0000 }, /* R279 - DRC 4 */
{ 280, 0x0000 }, /* R280 - DRC 5 */
{ 285, 0x0000 }, /* R285 - Tloopback */
{ 335, 0x0004 }, /* R335 - EQ1 */
{ 336, 0x6318 }, /* R336 - EQ2 */
{ 337, 0x6300 }, /* R337 - EQ3 */
{ 338, 0x0FCA }, /* R338 - EQ4 */
{ 339, 0x0400 }, /* R339 - EQ5 */
{ 340, 0x00D8 }, /* R340 - EQ6 */
{ 341, 0x1EB5 }, /* R341 - EQ7 */
{ 342, 0xF145 }, /* R342 - EQ8 */
{ 343, 0x0B75 }, /* R343 - EQ9 */
{ 344, 0x01C5 }, /* R344 - EQ10 */
{ 345, 0x1C58 }, /* R345 - EQ11 */
{ 346, 0xF373 }, /* R346 - EQ12 */
{ 347, 0x0A54 }, /* R347 - EQ13 */
{ 348, 0x0558 }, /* R348 - EQ14 */
{ 349, 0x168E }, /* R349 - EQ15 */
{ 350, 0xF829 }, /* R350 - EQ16 */
{ 351, 0x07AD }, /* R351 - EQ17 */
{ 352, 0x1103 }, /* R352 - EQ18 */
{ 353, 0x0564 }, /* R353 - EQ19 */
{ 354, 0x0559 }, /* R354 - EQ20 */
{ 355, 0x4000 }, /* R355 - EQ21 */
{ 356, 0x6318 }, /* R356 - EQ22 */
{ 357, 0x6300 }, /* R357 - EQ23 */
{ 358, 0x0FCA }, /* R358 - EQ24 */
{ 359, 0x0400 }, /* R359 - EQ25 */
{ 360, 0x00D8 }, /* R360 - EQ26 */
{ 361, 0x1EB5 }, /* R361 - EQ27 */
{ 362, 0xF145 }, /* R362 - EQ28 */
{ 363, 0x0B75 }, /* R363 - EQ29 */
{ 364, 0x01C5 }, /* R364 - EQ30 */
{ 365, 0x1C58 }, /* R365 - EQ31 */
{ 366, 0xF373 }, /* R366 - EQ32 */
{ 367, 0x0A54 }, /* R367 - EQ33 */
{ 368, 0x0558 }, /* R368 - EQ34 */
{ 369, 0x168E }, /* R369 - EQ35 */
{ 370, 0xF829 }, /* R370 - EQ36 */
{ 371, 0x07AD }, /* R371 - EQ37 */
{ 372, 0x1103 }, /* R372 - EQ38 */
{ 373, 0x0564 }, /* R373 - EQ39 */
{ 374, 0x0559 }, /* R374 - EQ40 */
{ 375, 0x4000 }, /* R375 - EQ41 */
{ 513, 0x0000 }, /* R513 - GPIO 2 */
{ 514, 0x0000 }, /* R514 - GPIO 3 */
{ 516, 0x8100 }, /* R516 - GPIO 5 */
{ 517, 0x8100 }, /* R517 - GPIO 6 */
{ 560, 0x0000 }, /* R560 - Interrupt Status 1 */
{ 561, 0x0000 }, /* R561 - Interrupt Status 2 */
{ 568, 0x0030 }, /* R568 - Interrupt Status 1 Mask */
{ 569, 0xFFED }, /* R569 - Interrupt Status 2 Mask */
{ 576, 0x0000 }, /* R576 - Interrupt Control */
{ 584, 0x002D }, /* R584 - IRQ Debounce */
{ 586, 0x0000 }, /* R586 - MICINT Source Pol */
{ 768, 0x1C00 }, /* R768 - DSP2 Power Management */
{ 1037, 0x0000 }, /* R1037 - DSP2_ExecControl */
{ 8192, 0x0000 }, /* R8192 - DSP2 Instruction RAM 0 */
{ 9216, 0x0030 }, /* R9216 - DSP2 Address RAM 2 */
{ 9217, 0x0000 }, /* R9217 - DSP2 Address RAM 1 */
{ 9218, 0x0000 }, /* R9218 - DSP2 Address RAM 0 */
{ 12288, 0x0000 }, /* R12288 - DSP2 Data1 RAM 1 */
{ 12289, 0x0000 }, /* R12289 - DSP2 Data1 RAM 0 */
{ 13312, 0x0000 }, /* R13312 - DSP2 Data2 RAM 1 */
{ 13313, 0x0000 }, /* R13313 - DSP2 Data2 RAM 0 */
{ 14336, 0x0000 }, /* R14336 - DSP2 Data3 RAM 1 */
{ 14337, 0x0000 }, /* R14337 - DSP2 Data3 RAM 0 */
{ 15360, 0x000A }, /* R15360 - DSP2 Coeff RAM 0 */
{ 16384, 0x0000 }, /* R16384 - RETUNEADC_SHARED_COEFF_1 */
{ 16385, 0x0000 }, /* R16385 - RETUNEADC_SHARED_COEFF_0 */
{ 16386, 0x0000 }, /* R16386 - RETUNEDAC_SHARED_COEFF_1 */
{ 16387, 0x0000 }, /* R16387 - RETUNEDAC_SHARED_COEFF_0 */
{ 16388, 0x0000 }, /* R16388 - SOUNDSTAGE_ENABLES_1 */
{ 16389, 0x0000 }, /* R16389 - SOUNDSTAGE_ENABLES_0 */
{ 16896, 0x0002 }, /* R16896 - HDBASS_AI_1 */
{ 16897, 0xBD12 }, /* R16897 - HDBASS_AI_0 */
{ 16898, 0x007C }, /* R16898 - HDBASS_AR_1 */
{ 16899, 0x586C }, /* R16899 - HDBASS_AR_0 */
{ 16900, 0x0053 }, /* R16900 - HDBASS_B_1 */
{ 16901, 0x8121 }, /* R16901 - HDBASS_B_0 */
{ 16902, 0x003F }, /* R16902 - HDBASS_K_1 */
{ 16903, 0x8BD8 }, /* R16903 - HDBASS_K_0 */
{ 16904, 0x0032 }, /* R16904 - HDBASS_N1_1 */
{ 16905, 0xF52D }, /* R16905 - HDBASS_N1_0 */
{ 16906, 0x0065 }, /* R16906 - HDBASS_N2_1 */
{ 16907, 0xAC8C }, /* R16907 - HDBASS_N2_0 */
{ 16908, 0x006B }, /* R16908 - HDBASS_N3_1 */
{ 16909, 0xE087 }, /* R16909 - HDBASS_N3_0 */
{ 16910, 0x0072 }, /* R16910 - HDBASS_N4_1 */
{ 16911, 0x1483 }, /* R16911 - HDBASS_N4_0 */
{ 16912, 0x0072 }, /* R16912 - HDBASS_N5_1 */
{ 16913, 0x1483 }, /* R16913 - HDBASS_N5_0 */
{ 16914, 0x0043 }, /* R16914 - HDBASS_X1_1 */
{ 16915, 0x3525 }, /* R16915 - HDBASS_X1_0 */
{ 16916, 0x0006 }, /* R16916 - HDBASS_X2_1 */
{ 16917, 0x6A4A }, /* R16917 - HDBASS_X2_0 */
{ 16918, 0x0043 }, /* R16918 - HDBASS_X3_1 */
{ 16919, 0x6079 }, /* R16919 - HDBASS_X3_0 */
{ 16920, 0x0008 }, /* R16920 - HDBASS_ATK_1 */
{ 16921, 0x0000 }, /* R16921 - HDBASS_ATK_0 */
{ 16922, 0x0001 }, /* R16922 - HDBASS_DCY_1 */
{ 16923, 0x0000 }, /* R16923 - HDBASS_DCY_0 */
{ 16924, 0x0059 }, /* R16924 - HDBASS_PG_1 */
{ 16925, 0x999A }, /* R16925 - HDBASS_PG_0 */
{ 17048, 0x0083 }, /* R17408 - HPF_C_1 */
{ 17049, 0x98AD }, /* R17409 - HPF_C_0 */
{ 17920, 0x007F }, /* R17920 - ADCL_RETUNE_C1_1 */
{ 17921, 0xFFFF }, /* R17921 - ADCL_RETUNE_C1_0 */
{ 17922, 0x0000 }, /* R17922 - ADCL_RETUNE_C2_1 */
{ 17923, 0x0000 }, /* R17923 - ADCL_RETUNE_C2_0 */
{ 17924, 0x0000 }, /* R17924 - ADCL_RETUNE_C3_1 */
{ 17925, 0x0000 }, /* R17925 - ADCL_RETUNE_C3_0 */
{ 17926, 0x0000 }, /* R17926 - ADCL_RETUNE_C4_1 */
{ 17927, 0x0000 }, /* R17927 - ADCL_RETUNE_C4_0 */
{ 17928, 0x0000 }, /* R17928 - ADCL_RETUNE_C5_1 */
{ 17929, 0x0000 }, /* R17929 - ADCL_RETUNE_C5_0 */
{ 17930, 0x0000 }, /* R17930 - ADCL_RETUNE_C6_1 */
{ 17931, 0x0000 }, /* R17931 - ADCL_RETUNE_C6_0 */
{ 17932, 0x0000 }, /* R17932 - ADCL_RETUNE_C7_1 */
{ 17933, 0x0000 }, /* R17933 - ADCL_RETUNE_C7_0 */
{ 17934, 0x0000 }, /* R17934 - ADCL_RETUNE_C8_1 */
{ 17935, 0x0000 }, /* R17935 - ADCL_RETUNE_C8_0 */
{ 17936, 0x0000 }, /* R17936 - ADCL_RETUNE_C9_1 */
{ 17937, 0x0000 }, /* R17937 - ADCL_RETUNE_C9_0 */
{ 17938, 0x0000 }, /* R17938 - ADCL_RETUNE_C10_1 */
{ 17939, 0x0000 }, /* R17939 - ADCL_RETUNE_C10_0 */
{ 17940, 0x0000 }, /* R17940 - ADCL_RETUNE_C11_1 */
{ 17941, 0x0000 }, /* R17941 - ADCL_RETUNE_C11_0 */
{ 17942, 0x0000 }, /* R17942 - ADCL_RETUNE_C12_1 */
{ 17943, 0x0000 }, /* R17943 - ADCL_RETUNE_C12_0 */
{ 17944, 0x0000 }, /* R17944 - ADCL_RETUNE_C13_1 */
{ 17945, 0x0000 }, /* R17945 - ADCL_RETUNE_C13_0 */
{ 17946, 0x0000 }, /* R17946 - ADCL_RETUNE_C14_1 */
{ 17947, 0x0000 }, /* R17947 - ADCL_RETUNE_C14_0 */
{ 17948, 0x0000 }, /* R17948 - ADCL_RETUNE_C15_1 */
{ 17949, 0x0000 }, /* R17949 - ADCL_RETUNE_C15_0 */
{ 17950, 0x0000 }, /* R17950 - ADCL_RETUNE_C16_1 */
{ 17951, 0x0000 }, /* R17951 - ADCL_RETUNE_C16_0 */
{ 17952, 0x0000 }, /* R17952 - ADCL_RETUNE_C17_1 */
{ 17953, 0x0000 }, /* R17953 - ADCL_RETUNE_C17_0 */
{ 17954, 0x0000 }, /* R17954 - ADCL_RETUNE_C18_1 */
{ 17955, 0x0000 }, /* R17955 - ADCL_RETUNE_C18_0 */
{ 17956, 0x0000 }, /* R17956 - ADCL_RETUNE_C19_1 */
{ 17957, 0x0000 }, /* R17957 - ADCL_RETUNE_C19_0 */
{ 17958, 0x0000 }, /* R17958 - ADCL_RETUNE_C20_1 */
{ 17959, 0x0000 }, /* R17959 - ADCL_RETUNE_C20_0 */
{ 17960, 0x0000 }, /* R17960 - ADCL_RETUNE_C21_1 */
{ 17961, 0x0000 }, /* R17961 - ADCL_RETUNE_C21_0 */
{ 17962, 0x0000 }, /* R17962 - ADCL_RETUNE_C22_1 */
{ 17963, 0x0000 }, /* R17963 - ADCL_RETUNE_C22_0 */
{ 17964, 0x0000 }, /* R17964 - ADCL_RETUNE_C23_1 */
{ 17965, 0x0000 }, /* R17965 - ADCL_RETUNE_C23_0 */
{ 17966, 0x0000 }, /* R17966 - ADCL_RETUNE_C24_1 */
{ 17967, 0x0000 }, /* R17967 - ADCL_RETUNE_C24_0 */
{ 17968, 0x0000 }, /* R17968 - ADCL_RETUNE_C25_1 */
{ 17969, 0x0000 }, /* R17969 - ADCL_RETUNE_C25_0 */
{ 17970, 0x0000 }, /* R17970 - ADCL_RETUNE_C26_1 */
{ 17971, 0x0000 }, /* R17971 - ADCL_RETUNE_C26_0 */
{ 17972, 0x0000 }, /* R17972 - ADCL_RETUNE_C27_1 */
{ 17973, 0x0000 }, /* R17973 - ADCL_RETUNE_C27_0 */
{ 17974, 0x0000 }, /* R17974 - ADCL_RETUNE_C28_1 */
{ 17975, 0x0000 }, /* R17975 - ADCL_RETUNE_C28_0 */
{ 17976, 0x0000 }, /* R17976 - ADCL_RETUNE_C29_1 */
{ 17977, 0x0000 }, /* R17977 - ADCL_RETUNE_C29_0 */
{ 17978, 0x0000 }, /* R17978 - ADCL_RETUNE_C30_1 */
{ 17979, 0x0000 }, /* R17979 - ADCL_RETUNE_C30_0 */
{ 17980, 0x0000 }, /* R17980 - ADCL_RETUNE_C31_1 */
{ 17981, 0x0000 }, /* R17981 - ADCL_RETUNE_C31_0 */
{ 17982, 0x0000 }, /* R17982 - ADCL_RETUNE_C32_1 */
{ 17983, 0x0000 }, /* R17983 - ADCL_RETUNE_C32_0 */
{ 18432, 0x0020 }, /* R18432 - RETUNEADC_PG2_1 */
{ 18433, 0x0000 }, /* R18433 - RETUNEADC_PG2_0 */
{ 18434, 0x0040 }, /* R18434 - RETUNEADC_PG_1 */
{ 18435, 0x0000 }, /* R18435 - RETUNEADC_PG_0 */
{ 18944, 0x007F }, /* R18944 - ADCR_RETUNE_C1_1 */
{ 18945, 0xFFFF }, /* R18945 - ADCR_RETUNE_C1_0 */
{ 18946, 0x0000 }, /* R18946 - ADCR_RETUNE_C2_1 */
{ 18947, 0x0000 }, /* R18947 - ADCR_RETUNE_C2_0 */
{ 18948, 0x0000 }, /* R18948 - ADCR_RETUNE_C3_1 */
{ 18949, 0x0000 }, /* R18949 - ADCR_RETUNE_C3_0 */
{ 18950, 0x0000 }, /* R18950 - ADCR_RETUNE_C4_1 */
{ 18951, 0x0000 }, /* R18951 - ADCR_RETUNE_C4_0 */
{ 18952, 0x0000 }, /* R18952 - ADCR_RETUNE_C5_1 */
{ 18953, 0x0000 }, /* R18953 - ADCR_RETUNE_C5_0 */
{ 18954, 0x0000 }, /* R18954 - ADCR_RETUNE_C6_1 */
{ 18955, 0x0000 }, /* R18955 - ADCR_RETUNE_C6_0 */
{ 18956, 0x0000 }, /* R18956 - ADCR_RETUNE_C7_1 */
{ 18957, 0x0000 }, /* R18957 - ADCR_RETUNE_C7_0 */
{ 18958, 0x0000 }, /* R18958 - ADCR_RETUNE_C8_1 */
{ 18959, 0x0000 }, /* R18959 - ADCR_RETUNE_C8_0 */
{ 18960, 0x0000 }, /* R18960 - ADCR_RETUNE_C9_1 */
{ 18961, 0x0000 }, /* R18961 - ADCR_RETUNE_C9_0 */
{ 18962, 0x0000 }, /* R18962 - ADCR_RETUNE_C10_1 */
{ 18963, 0x0000 }, /* R18963 - ADCR_RETUNE_C10_0 */
{ 18964, 0x0000 }, /* R18964 - ADCR_RETUNE_C11_1 */
{ 18965, 0x0000 }, /* R18965 - ADCR_RETUNE_C11_0 */
{ 18966, 0x0000 }, /* R18966 - ADCR_RETUNE_C12_1 */
{ 18967, 0x0000 }, /* R18967 - ADCR_RETUNE_C12_0 */
{ 18968, 0x0000 }, /* R18968 - ADCR_RETUNE_C13_1 */
{ 18969, 0x0000 }, /* R18969 - ADCR_RETUNE_C13_0 */
{ 18970, 0x0000 }, /* R18970 - ADCR_RETUNE_C14_1 */
{ 18971, 0x0000 }, /* R18971 - ADCR_RETUNE_C14_0 */
{ 18972, 0x0000 }, /* R18972 - ADCR_RETUNE_C15_1 */
{ 18973, 0x0000 }, /* R18973 - ADCR_RETUNE_C15_0 */
{ 18974, 0x0000 }, /* R18974 - ADCR_RETUNE_C16_1 */
{ 18975, 0x0000 }, /* R18975 - ADCR_RETUNE_C16_0 */
{ 18976, 0x0000 }, /* R18976 - ADCR_RETUNE_C17_1 */
{ 18977, 0x0000 }, /* R18977 - ADCR_RETUNE_C17_0 */
{ 18978, 0x0000 }, /* R18978 - ADCR_RETUNE_C18_1 */
{ 18979, 0x0000 }, /* R18979 - ADCR_RETUNE_C18_0 */
{ 18980, 0x0000 }, /* R18980 - ADCR_RETUNE_C19_1 */
{ 18981, 0x0000 }, /* R18981 - ADCR_RETUNE_C19_0 */
{ 18982, 0x0000 }, /* R18982 - ADCR_RETUNE_C20_1 */
{ 18983, 0x0000 }, /* R18983 - ADCR_RETUNE_C20_0 */
{ 18984, 0x0000 }, /* R18984 - ADCR_RETUNE_C21_1 */
{ 18985, 0x0000 }, /* R18985 - ADCR_RETUNE_C21_0 */
{ 18986, 0x0000 }, /* R18986 - ADCR_RETUNE_C22_1 */
{ 18987, 0x0000 }, /* R18987 - ADCR_RETUNE_C22_0 */
{ 18988, 0x0000 }, /* R18988 - ADCR_RETUNE_C23_1 */
{ 18989, 0x0000 }, /* R18989 - ADCR_RETUNE_C23_0 */
{ 18990, 0x0000 }, /* R18990 - ADCR_RETUNE_C24_1 */
{ 18991, 0x0000 }, /* R18991 - ADCR_RETUNE_C24_0 */
{ 18992, 0x0000 }, /* R18992 - ADCR_RETUNE_C25_1 */
{ 18993, 0x0000 }, /* R18993 - ADCR_RETUNE_C25_0 */
{ 18994, 0x0000 }, /* R18994 - ADCR_RETUNE_C26_1 */
{ 18995, 0x0000 }, /* R18995 - ADCR_RETUNE_C26_0 */
{ 18996, 0x0000 }, /* R18996 - ADCR_RETUNE_C27_1 */
{ 18997, 0x0000 }, /* R18997 - ADCR_RETUNE_C27_0 */
{ 18998, 0x0000 }, /* R18998 - ADCR_RETUNE_C28_1 */
{ 18999, 0x0000 }, /* R18999 - ADCR_RETUNE_C28_0 */
{ 19000, 0x0000 }, /* R19000 - ADCR_RETUNE_C29_1 */
{ 19001, 0x0000 }, /* R19001 - ADCR_RETUNE_C29_0 */
{ 19002, 0x0000 }, /* R19002 - ADCR_RETUNE_C30_1 */
{ 19003, 0x0000 }, /* R19003 - ADCR_RETUNE_C30_0 */
{ 19004, 0x0000 }, /* R19004 - ADCR_RETUNE_C31_1 */
{ 19005, 0x0000 }, /* R19005 - ADCR_RETUNE_C31_0 */
{ 19006, 0x0000 }, /* R19006 - ADCR_RETUNE_C32_1 */
{ 19007, 0x0000 }, /* R19007 - ADCR_RETUNE_C32_0 */
{ 19456, 0x007F }, /* R19456 - DACL_RETUNE_C1_1 */
{ 19457, 0xFFFF }, /* R19457 - DACL_RETUNE_C1_0 */
{ 19458, 0x0000 }, /* R19458 - DACL_RETUNE_C2_1 */
{ 19459, 0x0000 }, /* R19459 - DACL_RETUNE_C2_0 */
{ 19460, 0x0000 }, /* R19460 - DACL_RETUNE_C3_1 */
{ 19461, 0x0000 }, /* R19461 - DACL_RETUNE_C3_0 */
{ 19462, 0x0000 }, /* R19462 - DACL_RETUNE_C4_1 */
{ 19463, 0x0000 }, /* R19463 - DACL_RETUNE_C4_0 */
{ 19464, 0x0000 }, /* R19464 - DACL_RETUNE_C5_1 */
{ 19465, 0x0000 }, /* R19465 - DACL_RETUNE_C5_0 */
{ 19466, 0x0000 }, /* R19466 - DACL_RETUNE_C6_1 */
{ 19467, 0x0000 }, /* R19467 - DACL_RETUNE_C6_0 */
{ 19468, 0x0000 }, /* R19468 - DACL_RETUNE_C7_1 */
{ 19469, 0x0000 }, /* R19469 - DACL_RETUNE_C7_0 */
{ 19470, 0x0000 }, /* R19470 - DACL_RETUNE_C8_1 */
{ 19471, 0x0000 }, /* R19471 - DACL_RETUNE_C8_0 */
{ 19472, 0x0000 }, /* R19472 - DACL_RETUNE_C9_1 */
{ 19473, 0x0000 }, /* R19473 - DACL_RETUNE_C9_0 */
{ 19474, 0x0000 }, /* R19474 - DACL_RETUNE_C10_1 */
{ 19475, 0x0000 }, /* R19475 - DACL_RETUNE_C10_0 */
{ 19476, 0x0000 }, /* R19476 - DACL_RETUNE_C11_1 */
{ 19477, 0x0000 }, /* R19477 - DACL_RETUNE_C11_0 */
{ 19478, 0x0000 }, /* R19478 - DACL_RETUNE_C12_1 */
{ 19479, 0x0000 }, /* R19479 - DACL_RETUNE_C12_0 */
{ 19480, 0x0000 }, /* R19480 - DACL_RETUNE_C13_1 */
{ 19481, 0x0000 }, /* R19481 - DACL_RETUNE_C13_0 */
{ 19482, 0x0000 }, /* R19482 - DACL_RETUNE_C14_1 */
{ 19483, 0x0000 }, /* R19483 - DACL_RETUNE_C14_0 */
{ 19484, 0x0000 }, /* R19484 - DACL_RETUNE_C15_1 */
{ 19485, 0x0000 }, /* R19485 - DACL_RETUNE_C15_0 */
{ 19486, 0x0000 }, /* R19486 - DACL_RETUNE_C16_1 */
{ 19487, 0x0000 }, /* R19487 - DACL_RETUNE_C16_0 */
{ 19488, 0x0000 }, /* R19488 - DACL_RETUNE_C17_1 */
{ 19489, 0x0000 }, /* R19489 - DACL_RETUNE_C17_0 */
{ 19490, 0x0000 }, /* R19490 - DACL_RETUNE_C18_1 */
{ 19491, 0x0000 }, /* R19491 - DACL_RETUNE_C18_0 */
{ 19492, 0x0000 }, /* R19492 - DACL_RETUNE_C19_1 */
{ 19493, 0x0000 }, /* R19493 - DACL_RETUNE_C19_0 */
{ 19494, 0x0000 }, /* R19494 - DACL_RETUNE_C20_1 */
{ 19495, 0x0000 }, /* R19495 - DACL_RETUNE_C20_0 */
{ 19496, 0x0000 }, /* R19496 - DACL_RETUNE_C21_1 */
{ 19497, 0x0000 }, /* R19497 - DACL_RETUNE_C21_0 */
{ 19498, 0x0000 }, /* R19498 - DACL_RETUNE_C22_1 */
{ 19499, 0x0000 }, /* R19499 - DACL_RETUNE_C22_0 */
{ 19500, 0x0000 }, /* R19500 - DACL_RETUNE_C23_1 */
{ 19501, 0x0000 }, /* R19501 - DACL_RETUNE_C23_0 */
{ 19502, 0x0000 }, /* R19502 - DACL_RETUNE_C24_1 */
{ 19503, 0x0000 }, /* R19503 - DACL_RETUNE_C24_0 */
{ 19504, 0x0000 }, /* R19504 - DACL_RETUNE_C25_1 */
{ 19505, 0x0000 }, /* R19505 - DACL_RETUNE_C25_0 */
{ 19506, 0x0000 }, /* R19506 - DACL_RETUNE_C26_1 */
{ 19507, 0x0000 }, /* R19507 - DACL_RETUNE_C26_0 */
{ 19508, 0x0000 }, /* R19508 - DACL_RETUNE_C27_1 */
{ 19509, 0x0000 }, /* R19509 - DACL_RETUNE_C27_0 */
{ 19510, 0x0000 }, /* R19510 - DACL_RETUNE_C28_1 */
{ 19511, 0x0000 }, /* R19511 - DACL_RETUNE_C28_0 */
{ 19512, 0x0000 }, /* R19512 - DACL_RETUNE_C29_1 */
{ 19513, 0x0000 }, /* R19513 - DACL_RETUNE_C29_0 */
{ 19514, 0x0000 }, /* R19514 - DACL_RETUNE_C30_1 */
{ 19515, 0x0000 }, /* R19515 - DACL_RETUNE_C30_0 */
{ 19516, 0x0000 }, /* R19516 - DACL_RETUNE_C31_1 */
{ 19517, 0x0000 }, /* R19517 - DACL_RETUNE_C31_0 */
{ 19518, 0x0000 }, /* R19518 - DACL_RETUNE_C32_1 */
{ 19519, 0x0000 }, /* R19519 - DACL_RETUNE_C32_0 */
{ 19968, 0x0020 }, /* R19968 - RETUNEDAC_PG2_1 */
{ 19969, 0x0000 }, /* R19969 - RETUNEDAC_PG2_0 */
{ 19970, 0x0040 }, /* R19970 - RETUNEDAC_PG_1 */
{ 19971, 0x0000 }, /* R19971 - RETUNEDAC_PG_0 */
{ 20480, 0x007F }, /* R20480 - DACR_RETUNE_C1_1 */
{ 20481, 0xFFFF }, /* R20481 - DACR_RETUNE_C1_0 */
{ 20482, 0x0000 }, /* R20482 - DACR_RETUNE_C2_1 */
{ 20483, 0x0000 }, /* R20483 - DACR_RETUNE_C2_0 */
{ 20484, 0x0000 }, /* R20484 - DACR_RETUNE_C3_1 */
{ 20485, 0x0000 }, /* R20485 - DACR_RETUNE_C3_0 */
{ 20486, 0x0000 }, /* R20486 - DACR_RETUNE_C4_1 */
{ 20487, 0x0000 }, /* R20487 - DACR_RETUNE_C4_0 */
{ 20488, 0x0000 }, /* R20488 - DACR_RETUNE_C5_1 */
{ 20489, 0x0000 }, /* R20489 - DACR_RETUNE_C5_0 */
{ 20490, 0x0000 }, /* R20490 - DACR_RETUNE_C6_1 */
{ 20491, 0x0000 }, /* R20491 - DACR_RETUNE_C6_0 */
{ 20492, 0x0000 }, /* R20492 - DACR_RETUNE_C7_1 */
{ 20493, 0x0000 }, /* R20493 - DACR_RETUNE_C7_0 */
{ 20494, 0x0000 }, /* R20494 - DACR_RETUNE_C8_1 */
{ 20495, 0x0000 }, /* R20495 - DACR_RETUNE_C8_0 */
{ 20496, 0x0000 }, /* R20496 - DACR_RETUNE_C9_1 */
{ 20497, 0x0000 }, /* R20497 - DACR_RETUNE_C9_0 */
{ 20498, 0x0000 }, /* R20498 - DACR_RETUNE_C10_1 */
{ 20499, 0x0000 }, /* R20499 - DACR_RETUNE_C10_0 */
{ 20500, 0x0000 }, /* R20500 - DACR_RETUNE_C11_1 */
{ 20501, 0x0000 }, /* R20501 - DACR_RETUNE_C11_0 */
{ 20502, 0x0000 }, /* R20502 - DACR_RETUNE_C12_1 */
{ 20503, 0x0000 }, /* R20503 - DACR_RETUNE_C12_0 */
{ 20504, 0x0000 }, /* R20504 - DACR_RETUNE_C13_1 */
{ 20505, 0x0000 }, /* R20505 - DACR_RETUNE_C13_0 */
{ 20506, 0x0000 }, /* R20506 - DACR_RETUNE_C14_1 */
{ 20507, 0x0000 }, /* R20507 - DACR_RETUNE_C14_0 */
{ 20508, 0x0000 }, /* R20508 - DACR_RETUNE_C15_1 */
{ 20509, 0x0000 }, /* R20509 - DACR_RETUNE_C15_0 */
{ 20510, 0x0000 }, /* R20510 - DACR_RETUNE_C16_1 */
{ 20511, 0x0000 }, /* R20511 - DACR_RETUNE_C16_0 */
{ 20512, 0x0000 }, /* R20512 - DACR_RETUNE_C17_1 */
{ 20513, 0x0000 }, /* R20513 - DACR_RETUNE_C17_0 */
{ 20514, 0x0000 }, /* R20514 - DACR_RETUNE_C18_1 */
{ 20515, 0x0000 }, /* R20515 - DACR_RETUNE_C18_0 */
{ 20516, 0x0000 }, /* R20516 - DACR_RETUNE_C19_1 */
{ 20517, 0x0000 }, /* R20517 - DACR_RETUNE_C19_0 */
{ 20518, 0x0000 }, /* R20518 - DACR_RETUNE_C20_1 */
{ 20519, 0x0000 }, /* R20519 - DACR_RETUNE_C20_0 */
{ 20520, 0x0000 }, /* R20520 - DACR_RETUNE_C21_1 */
{ 20521, 0x0000 }, /* R20521 - DACR_RETUNE_C21_0 */
{ 20522, 0x0000 }, /* R20522 - DACR_RETUNE_C22_1 */
{ 20523, 0x0000 }, /* R20523 - DACR_RETUNE_C22_0 */
{ 20524, 0x0000 }, /* R20524 - DACR_RETUNE_C23_1 */
{ 20525, 0x0000 }, /* R20525 - DACR_RETUNE_C23_0 */
{ 20526, 0x0000 }, /* R20526 - DACR_RETUNE_C24_1 */
{ 20527, 0x0000 }, /* R20527 - DACR_RETUNE_C24_0 */
{ 20528, 0x0000 }, /* R20528 - DACR_RETUNE_C25_1 */
{ 20529, 0x0000 }, /* R20529 - DACR_RETUNE_C25_0 */
{ 20530, 0x0000 }, /* R20530 - DACR_RETUNE_C26_1 */
{ 20531, 0x0000 }, /* R20531 - DACR_RETUNE_C26_0 */
{ 20532, 0x0000 }, /* R20532 - DACR_RETUNE_C27_1 */
{ 20533, 0x0000 }, /* R20533 - DACR_RETUNE_C27_0 */
{ 20534, 0x0000 }, /* R20534 - DACR_RETUNE_C28_1 */
{ 20535, 0x0000 }, /* R20535 - DACR_RETUNE_C28_0 */
{ 20536, 0x0000 }, /* R20536 - DACR_RETUNE_C29_1 */
{ 20537, 0x0000 }, /* R20537 - DACR_RETUNE_C29_0 */
{ 20538, 0x0000 }, /* R20538 - DACR_RETUNE_C30_1 */
{ 20539, 0x0000 }, /* R20539 - DACR_RETUNE_C30_0 */
{ 20540, 0x0000 }, /* R20540 - DACR_RETUNE_C31_1 */
{ 20541, 0x0000 }, /* R20541 - DACR_RETUNE_C31_0 */
{ 20542, 0x0000 }, /* R20542 - DACR_RETUNE_C32_1 */
{ 20543, 0x0000 }, /* R20543 - DACR_RETUNE_C32_0 */
{ 20992, 0x008C }, /* R20992 - VSS_XHD2_1 */
{ 20993, 0x0200 }, /* R20993 - VSS_XHD2_0 */
{ 20994, 0x0035 }, /* R20994 - VSS_XHD3_1 */
{ 20995, 0x0700 }, /* R20995 - VSS_XHD3_0 */
{ 20996, 0x003A }, /* R20996 - VSS_XHN1_1 */
{ 20997, 0x4100 }, /* R20997 - VSS_XHN1_0 */
{ 20998, 0x008B }, /* R20998 - VSS_XHN2_1 */
{ 20999, 0x7D00 }, /* R20999 - VSS_XHN2_0 */
{ 21000, 0x003A }, /* R21000 - VSS_XHN3_1 */
{ 21001, 0x4100 }, /* R21001 - VSS_XHN3_0 */
{ 21002, 0x008C }, /* R21002 - VSS_XLA_1 */
{ 21003, 0xFEE8 }, /* R21003 - VSS_XLA_0 */
{ 21004, 0x0078 }, /* R21004 - VSS_XLB_1 */
{ 21005, 0x0000 }, /* R21005 - VSS_XLB_0 */
{ 21006, 0x003F }, /* R21006 - VSS_XLG_1 */
{ 21007, 0xB260 }, /* R21007 - VSS_XLG_0 */
{ 21008, 0x002D }, /* R21008 - VSS_PG2_1 */
{ 21009, 0x1818 }, /* R21009 - VSS_PG2_0 */
{ 21010, 0x0020 }, /* R21010 - VSS_PG_1 */
{ 21011, 0x0000 }, /* R21011 - VSS_PG_0 */
{ 21012, 0x00F1 }, /* R21012 - VSS_XTD1_1 */
{ 21013, 0x8340 }, /* R21013 - VSS_XTD1_0 */
{ 21014, 0x00FB }, /* R21014 - VSS_XTD2_1 */
{ 21015, 0x8300 }, /* R21015 - VSS_XTD2_0 */
{ 21016, 0x00EE }, /* R21016 - VSS_XTD3_1 */
{ 21017, 0xAEC0 }, /* R21017 - VSS_XTD3_0 */
{ 21018, 0x00FB }, /* R21018 - VSS_XTD4_1 */
{ 21019, 0xAC40 }, /* R21019 - VSS_XTD4_0 */
{ 21020, 0x00F1 }, /* R21020 - VSS_XTD5_1 */
{ 21021, 0x7F80 }, /* R21021 - VSS_XTD5_0 */
{ 21022, 0x00F4 }, /* R21022 - VSS_XTD6_1 */
{ 21023, 0x3B40 }, /* R21023 - VSS_XTD6_0 */
{ 21024, 0x00F5 }, /* R21024 - VSS_XTD7_1 */
{ 21025, 0xFB00 }, /* R21025 - VSS_XTD7_0 */
{ 21026, 0x00EA }, /* R21026 - VSS_XTD8_1 */
{ 21027, 0x10C0 }, /* R21027 - VSS_XTD8_0 */
{ 21028, 0x00FC }, /* R21028 - VSS_XTD9_1 */
{ 21029, 0xC580 }, /* R21029 - VSS_XTD9_0 */
{ 21030, 0x00E2 }, /* R21030 - VSS_XTD10_1 */
{ 21031, 0x75C0 }, /* R21031 - VSS_XTD10_0 */
{ 21032, 0x0004 }, /* R21032 - VSS_XTD11_1 */
{ 21033, 0xB480 }, /* R21033 - VSS_XTD11_0 */
{ 21034, 0x00D4 }, /* R21034 - VSS_XTD12_1 */
{ 21035, 0xF980 }, /* R21035 - VSS_XTD12_0 */
{ 21036, 0x0004 }, /* R21036 - VSS_XTD13_1 */
{ 21037, 0x9140 }, /* R21037 - VSS_XTD13_0 */
{ 21038, 0x00D8 }, /* R21038 - VSS_XTD14_1 */
{ 21039, 0xA480 }, /* R21039 - VSS_XTD14_0 */
{ 21040, 0x0002 }, /* R21040 - VSS_XTD15_1 */
{ 21041, 0x3DC0 }, /* R21041 - VSS_XTD15_0 */
{ 21042, 0x00CF }, /* R21042 - VSS_XTD16_1 */
{ 21043, 0x7A80 }, /* R21043 - VSS_XTD16_0 */
{ 21044, 0x00DC }, /* R21044 - VSS_XTD17_1 */
{ 21045, 0x0600 }, /* R21045 - VSS_XTD17_0 */
{ 21046, 0x00F2 }, /* R21046 - VSS_XTD18_1 */
{ 21047, 0xDAC0 }, /* R21047 - VSS_XTD18_0 */
{ 21048, 0x00BA }, /* R21048 - VSS_XTD19_1 */
{ 21049, 0xF340 }, /* R21049 - VSS_XTD19_0 */
{ 21050, 0x000A }, /* R21050 - VSS_XTD20_1 */
{ 21051, 0x7940 }, /* R21051 - VSS_XTD20_0 */
{ 21052, 0x001C }, /* R21052 - VSS_XTD21_1 */
{ 21053, 0x0680 }, /* R21053 - VSS_XTD21_0 */
{ 21054, 0x00FD }, /* R21054 - VSS_XTD22_1 */
{ 21055, 0x2D00 }, /* R21055 - VSS_XTD22_0 */
{ 21056, 0x001C }, /* R21056 - VSS_XTD23_1 */
{ 21057, 0xE840 }, /* R21057 - VSS_XTD23_0 */
{ 21058, 0x000D }, /* R21058 - VSS_XTD24_1 */
{ 21059, 0xDC40 }, /* R21059 - VSS_XTD24_0 */
{ 21060, 0x00FC }, /* R21060 - VSS_XTD25_1 */
{ 21061, 0x9D00 }, /* R21061 - VSS_XTD25_0 */
{ 21062, 0x0009 }, /* R21062 - VSS_XTD26_1 */
{ 21063, 0x5580 }, /* R21063 - VSS_XTD26_0 */
{ 21064, 0x00FE }, /* R21064 - VSS_XTD27_1 */
{ 21065, 0x7E80 }, /* R21065 - VSS_XTD27_0 */
{ 21066, 0x000E }, /* R21066 - VSS_XTD28_1 */
{ 21067, 0xAB40 }, /* R21067 - VSS_XTD28_0 */
{ 21068, 0x00F9 }, /* R21068 - VSS_XTD29_1 */
{ 21069, 0x9880 }, /* R21069 - VSS_XTD29_0 */
{ 21070, 0x0009 }, /* R21070 - VSS_XTD30_1 */
{ 21071, 0x87C0 }, /* R21071 - VSS_XTD30_0 */
{ 21072, 0x00FD }, /* R21072 - VSS_XTD31_1 */
{ 21073, 0x2C40 }, /* R21073 - VSS_XTD31_0 */
{ 21074, 0x0009 }, /* R21074 - VSS_XTD32_1 */
{ 21075, 0x4800 }, /* R21075 - VSS_XTD32_0 */
{ 21076, 0x0003 }, /* R21076 - VSS_XTS1_1 */
{ 21077, 0x5F40 }, /* R21077 - VSS_XTS1_0 */
{ 21078, 0x0000 }, /* R21078 - VSS_XTS2_1 */
{ 21079, 0x8700 }, /* R21079 - VSS_XTS2_0 */
{ 21080, 0x00FA }, /* R21080 - VSS_XTS3_1 */
{ 21081, 0xE4C0 }, /* R21081 - VSS_XTS3_0 */
{ 21082, 0x0000 }, /* R21082 - VSS_XTS4_1 */
{ 21083, 0x0B40 }, /* R21083 - VSS_XTS4_0 */
{ 21084, 0x0004 }, /* R21084 - VSS_XTS5_1 */
{ 21085, 0xE180 }, /* R21085 - VSS_XTS5_0 */
{ 21086, 0x0001 }, /* R21086 - VSS_XTS6_1 */
{ 21087, 0x1F40 }, /* R21087 - VSS_XTS6_0 */
{ 21088, 0x00F8 }, /* R21088 - VSS_XTS7_1 */
{ 21089, 0xB000 }, /* R21089 - VSS_XTS7_0 */
{ 21090, 0x00FB }, /* R21090 - VSS_XTS8_1 */
{ 21091, 0xCBC0 }, /* R21091 - VSS_XTS8_0 */
{ 21092, 0x0004 }, /* R21092 - VSS_XTS9_1 */
{ 21093, 0xF380 }, /* R21093 - VSS_XTS9_0 */
{ 21094, 0x0007 }, /* R21094 - VSS_XTS10_1 */
{ 21095, 0xDF40 }, /* R21095 - VSS_XTS10_0 */
{ 21096, 0x00FF }, /* R21096 - VSS_XTS11_1 */
{ 21097, 0x0700 }, /* R21097 - VSS_XTS11_0 */
{ 21098, 0x00EF }, /* R21098 - VSS_XTS12_1 */
{ 21099, 0xD700 }, /* R21099 - VSS_XTS12_0 */
{ 21100, 0x00FB }, /* R21100 - VSS_XTS13_1 */
{ 21101, 0xAF40 }, /* R21101 - VSS_XTS13_0 */
{ 21102, 0x0010 }, /* R21102 - VSS_XTS14_1 */
{ 21103, 0x8A80 }, /* R21103 - VSS_XTS14_0 */
{ 21104, 0x0011 }, /* R21104 - VSS_XTS15_1 */
{ 21105, 0x07C0 }, /* R21105 - VSS_XTS15_0 */
{ 21106, 0x00E0 }, /* R21106 - VSS_XTS16_1 */
{ 21107, 0x0800 }, /* R21107 - VSS_XTS16_0 */
{ 21108, 0x00D2 }, /* R21108 - VSS_XTS17_1 */
{ 21109, 0x7600 }, /* R21109 - VSS_XTS17_0 */
{ 21110, 0x0020 }, /* R21110 - VSS_XTS18_1 */
{ 21111, 0xCF40 }, /* R21111 - VSS_XTS18_0 */
{ 21112, 0x0030 }, /* R21112 - VSS_XTS19_1 */
{ 21113, 0x2340 }, /* R21113 - VSS_XTS19_0 */
{ 21114, 0x00FD }, /* R21114 - VSS_XTS20_1 */
{ 21115, 0x69C0 }, /* R21115 - VSS_XTS20_0 */
{ 21116, 0x0028 }, /* R21116 - VSS_XTS21_1 */
{ 21117, 0x3500 }, /* R21117 - VSS_XTS21_0 */
{ 21118, 0x0006 }, /* R21118 - VSS_XTS22_1 */
{ 21119, 0x3300 }, /* R21119 - VSS_XTS22_0 */
{ 21120, 0x00D9 }, /* R21120 - VSS_XTS23_1 */
{ 21121, 0xF6C0 }, /* R21121 - VSS_XTS23_0 */
{ 21122, 0x00F3 }, /* R21122 - VSS_XTS24_1 */
{ 21123, 0x3340 }, /* R21123 - VSS_XTS24_0 */
{ 21124, 0x000F }, /* R21124 - VSS_XTS25_1 */
{ 21125, 0x4200 }, /* R21125 - VSS_XTS25_0 */
{ 21126, 0x0004 }, /* R21126 - VSS_XTS26_1 */
{ 21127, 0x0C80 }, /* R21127 - VSS_XTS26_0 */
{ 21128, 0x00FB }, /* R21128 - VSS_XTS27_1 */
{ 21129, 0x3F80 }, /* R21129 - VSS_XTS27_0 */
{ 21130, 0x00F7 }, /* R21130 - VSS_XTS28_1 */
{ 21131, 0x57C0 }, /* R21131 - VSS_XTS28_0 */
{ 21132, 0x0003 }, /* R21132 - VSS_XTS29_1 */
{ 21133, 0x5400 }, /* R21133 - VSS_XTS29_0 */
{ 21134, 0x0000 }, /* R21134 - VSS_XTS30_1 */
{ 21135, 0xC6C0 }, /* R21135 - VSS_XTS30_0 */
{ 21136, 0x0003 }, /* R21136 - VSS_XTS31_1 */
{ 21137, 0x12C0 }, /* R21137 - VSS_XTS31_0 */
{ 21138, 0x00FD }, /* R21138 - VSS_XTS32_1 */
{ 21139, 0x8580 }, /* R21139 - VSS_XTS32_0 */
};
static bool wm8962_volatile_register(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM8962_CLOCKING1:
case WM8962_CLOCKING2:
case WM8962_SOFTWARE_RESET:
case WM8962_ALC2:
case WM8962_THERMAL_SHUTDOWN_STATUS:
case WM8962_ADDITIONAL_CONTROL_4:
case WM8962_CLASS_D_CONTROL_1:
case WM8962_DC_SERVO_6:
case WM8962_INTERRUPT_STATUS_1:
case WM8962_INTERRUPT_STATUS_2:
case WM8962_DSP2_EXECCONTROL:
return true;
default:
return false;
}
}
static bool wm8962_readable_register(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM8962_LEFT_INPUT_VOLUME:
case WM8962_RIGHT_INPUT_VOLUME:
case WM8962_HPOUTL_VOLUME:
case WM8962_HPOUTR_VOLUME:
case WM8962_CLOCKING1:
case WM8962_ADC_DAC_CONTROL_1:
case WM8962_ADC_DAC_CONTROL_2:
case WM8962_AUDIO_INTERFACE_0:
case WM8962_CLOCKING2:
case WM8962_AUDIO_INTERFACE_1:
case WM8962_LEFT_DAC_VOLUME:
case WM8962_RIGHT_DAC_VOLUME:
case WM8962_AUDIO_INTERFACE_2:
case WM8962_SOFTWARE_RESET:
case WM8962_ALC1:
case WM8962_ALC2:
case WM8962_ALC3:
case WM8962_NOISE_GATE:
case WM8962_LEFT_ADC_VOLUME:
case WM8962_RIGHT_ADC_VOLUME:
case WM8962_ADDITIONAL_CONTROL_1:
case WM8962_ADDITIONAL_CONTROL_2:
case WM8962_PWR_MGMT_1:
case WM8962_PWR_MGMT_2:
case WM8962_ADDITIONAL_CONTROL_3:
case WM8962_ANTI_POP:
case WM8962_CLOCKING_3:
case WM8962_INPUT_MIXER_CONTROL_1:
case WM8962_LEFT_INPUT_MIXER_VOLUME:
case WM8962_RIGHT_INPUT_MIXER_VOLUME:
case WM8962_INPUT_MIXER_CONTROL_2:
case WM8962_INPUT_BIAS_CONTROL:
case WM8962_LEFT_INPUT_PGA_CONTROL:
case WM8962_RIGHT_INPUT_PGA_CONTROL:
case WM8962_SPKOUTL_VOLUME:
case WM8962_SPKOUTR_VOLUME:
case WM8962_THERMAL_SHUTDOWN_STATUS:
case WM8962_ADDITIONAL_CONTROL_4:
case WM8962_CLASS_D_CONTROL_1:
case WM8962_CLASS_D_CONTROL_2:
case WM8962_CLOCKING_4:
case WM8962_DAC_DSP_MIXING_1:
case WM8962_DAC_DSP_MIXING_2:
case WM8962_DC_SERVO_0:
case WM8962_DC_SERVO_1:
case WM8962_DC_SERVO_4:
case WM8962_DC_SERVO_6:
case WM8962_ANALOGUE_PGA_BIAS:
case WM8962_ANALOGUE_HP_0:
case WM8962_ANALOGUE_HP_2:
case WM8962_CHARGE_PUMP_1:
case WM8962_CHARGE_PUMP_B:
case WM8962_WRITE_SEQUENCER_CONTROL_1:
case WM8962_WRITE_SEQUENCER_CONTROL_2:
case WM8962_WRITE_SEQUENCER_CONTROL_3:
case WM8962_CONTROL_INTERFACE:
case WM8962_MIXER_ENABLES:
case WM8962_HEADPHONE_MIXER_1:
case WM8962_HEADPHONE_MIXER_2:
case WM8962_HEADPHONE_MIXER_3:
case WM8962_HEADPHONE_MIXER_4:
case WM8962_SPEAKER_MIXER_1:
case WM8962_SPEAKER_MIXER_2:
case WM8962_SPEAKER_MIXER_3:
case WM8962_SPEAKER_MIXER_4:
case WM8962_SPEAKER_MIXER_5:
case WM8962_BEEP_GENERATOR_1:
case WM8962_OSCILLATOR_TRIM_3:
case WM8962_OSCILLATOR_TRIM_4:
case WM8962_OSCILLATOR_TRIM_7:
case WM8962_ANALOGUE_CLOCKING1:
case WM8962_ANALOGUE_CLOCKING2:
case WM8962_ANALOGUE_CLOCKING3:
case WM8962_PLL_SOFTWARE_RESET:
case WM8962_PLL2:
case WM8962_PLL_4:
case WM8962_PLL_9:
case WM8962_PLL_10:
case WM8962_PLL_11:
case WM8962_PLL_12:
case WM8962_PLL_13:
case WM8962_PLL_14:
case WM8962_PLL_15:
case WM8962_PLL_16:
case WM8962_FLL_CONTROL_1:
case WM8962_FLL_CONTROL_2:
case WM8962_FLL_CONTROL_3:
case WM8962_FLL_CONTROL_5:
case WM8962_FLL_CONTROL_6:
case WM8962_FLL_CONTROL_7:
case WM8962_FLL_CONTROL_8:
case WM8962_GENERAL_TEST_1:
case WM8962_DF1:
case WM8962_DF2:
case WM8962_DF3:
case WM8962_DF4:
case WM8962_DF5:
case WM8962_DF6:
case WM8962_DF7:
case WM8962_LHPF1:
case WM8962_LHPF2:
case WM8962_THREED1:
case WM8962_THREED2:
case WM8962_THREED3:
case WM8962_THREED4:
case WM8962_DRC_1:
case WM8962_DRC_2:
case WM8962_DRC_3:
case WM8962_DRC_4:
case WM8962_DRC_5:
case WM8962_TLOOPBACK:
case WM8962_EQ1:
case WM8962_EQ2:
case WM8962_EQ3:
case WM8962_EQ4:
case WM8962_EQ5:
case WM8962_EQ6:
case WM8962_EQ7:
case WM8962_EQ8:
case WM8962_EQ9:
case WM8962_EQ10:
case WM8962_EQ11:
case WM8962_EQ12:
case WM8962_EQ13:
case WM8962_EQ14:
case WM8962_EQ15:
case WM8962_EQ16:
case WM8962_EQ17:
case WM8962_EQ18:
case WM8962_EQ19:
case WM8962_EQ20:
case WM8962_EQ21:
case WM8962_EQ22:
case WM8962_EQ23:
case WM8962_EQ24:
case WM8962_EQ25:
case WM8962_EQ26:
case WM8962_EQ27:
case WM8962_EQ28:
case WM8962_EQ29:
case WM8962_EQ30:
case WM8962_EQ31:
case WM8962_EQ32:
case WM8962_EQ33:
case WM8962_EQ34:
case WM8962_EQ35:
case WM8962_EQ36:
case WM8962_EQ37:
case WM8962_EQ38:
case WM8962_EQ39:
case WM8962_EQ40:
case WM8962_EQ41:
case WM8962_GPIO_BASE:
case WM8962_GPIO_2:
case WM8962_GPIO_3:
case WM8962_GPIO_5:
case WM8962_GPIO_6:
case WM8962_INTERRUPT_STATUS_1:
case WM8962_INTERRUPT_STATUS_2:
case WM8962_INTERRUPT_STATUS_1_MASK:
case WM8962_INTERRUPT_STATUS_2_MASK:
case WM8962_INTERRUPT_CONTROL:
case WM8962_IRQ_DEBOUNCE:
case WM8962_MICINT_SOURCE_POL:
case WM8962_DSP2_POWER_MANAGEMENT:
case WM8962_DSP2_EXECCONTROL:
case WM8962_DSP2_INSTRUCTION_RAM_0:
case WM8962_DSP2_ADDRESS_RAM_2:
case WM8962_DSP2_ADDRESS_RAM_1:
case WM8962_DSP2_ADDRESS_RAM_0:
case WM8962_DSP2_DATA1_RAM_1:
case WM8962_DSP2_DATA1_RAM_0:
case WM8962_DSP2_DATA2_RAM_1:
case WM8962_DSP2_DATA2_RAM_0:
case WM8962_DSP2_DATA3_RAM_1:
case WM8962_DSP2_DATA3_RAM_0:
case WM8962_DSP2_COEFF_RAM_0:
case WM8962_RETUNEADC_SHARED_COEFF_1:
case WM8962_RETUNEADC_SHARED_COEFF_0:
case WM8962_RETUNEDAC_SHARED_COEFF_1:
case WM8962_RETUNEDAC_SHARED_COEFF_0:
case WM8962_SOUNDSTAGE_ENABLES_1:
case WM8962_SOUNDSTAGE_ENABLES_0:
case WM8962_HDBASS_AI_1:
case WM8962_HDBASS_AI_0:
case WM8962_HDBASS_AR_1:
case WM8962_HDBASS_AR_0:
case WM8962_HDBASS_B_1:
case WM8962_HDBASS_B_0:
case WM8962_HDBASS_K_1:
case WM8962_HDBASS_K_0:
case WM8962_HDBASS_N1_1:
case WM8962_HDBASS_N1_0:
case WM8962_HDBASS_N2_1:
case WM8962_HDBASS_N2_0:
case WM8962_HDBASS_N3_1:
case WM8962_HDBASS_N3_0:
case WM8962_HDBASS_N4_1:
case WM8962_HDBASS_N4_0:
case WM8962_HDBASS_N5_1:
case WM8962_HDBASS_N5_0:
case WM8962_HDBASS_X1_1:
case WM8962_HDBASS_X1_0:
case WM8962_HDBASS_X2_1:
case WM8962_HDBASS_X2_0:
case WM8962_HDBASS_X3_1:
case WM8962_HDBASS_X3_0:
case WM8962_HDBASS_ATK_1:
case WM8962_HDBASS_ATK_0:
case WM8962_HDBASS_DCY_1:
case WM8962_HDBASS_DCY_0:
case WM8962_HDBASS_PG_1:
case WM8962_HDBASS_PG_0:
case WM8962_HPF_C_1:
case WM8962_HPF_C_0:
case WM8962_ADCL_RETUNE_C1_1:
case WM8962_ADCL_RETUNE_C1_0:
case WM8962_ADCL_RETUNE_C2_1:
case WM8962_ADCL_RETUNE_C2_0:
case WM8962_ADCL_RETUNE_C3_1:
case WM8962_ADCL_RETUNE_C3_0:
case WM8962_ADCL_RETUNE_C4_1:
case WM8962_ADCL_RETUNE_C4_0:
case WM8962_ADCL_RETUNE_C5_1:
case WM8962_ADCL_RETUNE_C5_0:
case WM8962_ADCL_RETUNE_C6_1:
case WM8962_ADCL_RETUNE_C6_0:
case WM8962_ADCL_RETUNE_C7_1:
case WM8962_ADCL_RETUNE_C7_0:
case WM8962_ADCL_RETUNE_C8_1:
case WM8962_ADCL_RETUNE_C8_0:
case WM8962_ADCL_RETUNE_C9_1:
case WM8962_ADCL_RETUNE_C9_0:
case WM8962_ADCL_RETUNE_C10_1:
case WM8962_ADCL_RETUNE_C10_0:
case WM8962_ADCL_RETUNE_C11_1:
case WM8962_ADCL_RETUNE_C11_0:
case WM8962_ADCL_RETUNE_C12_1:
case WM8962_ADCL_RETUNE_C12_0:
case WM8962_ADCL_RETUNE_C13_1:
case WM8962_ADCL_RETUNE_C13_0:
case WM8962_ADCL_RETUNE_C14_1:
case WM8962_ADCL_RETUNE_C14_0:
case WM8962_ADCL_RETUNE_C15_1:
case WM8962_ADCL_RETUNE_C15_0:
case WM8962_ADCL_RETUNE_C16_1:
case WM8962_ADCL_RETUNE_C16_0:
case WM8962_ADCL_RETUNE_C17_1:
case WM8962_ADCL_RETUNE_C17_0:
case WM8962_ADCL_RETUNE_C18_1:
case WM8962_ADCL_RETUNE_C18_0:
case WM8962_ADCL_RETUNE_C19_1:
case WM8962_ADCL_RETUNE_C19_0:
case WM8962_ADCL_RETUNE_C20_1:
case WM8962_ADCL_RETUNE_C20_0:
case WM8962_ADCL_RETUNE_C21_1:
case WM8962_ADCL_RETUNE_C21_0:
case WM8962_ADCL_RETUNE_C22_1:
case WM8962_ADCL_RETUNE_C22_0:
case WM8962_ADCL_RETUNE_C23_1:
case WM8962_ADCL_RETUNE_C23_0:
case WM8962_ADCL_RETUNE_C24_1:
case WM8962_ADCL_RETUNE_C24_0:
case WM8962_ADCL_RETUNE_C25_1:
case WM8962_ADCL_RETUNE_C25_0:
case WM8962_ADCL_RETUNE_C26_1:
case WM8962_ADCL_RETUNE_C26_0:
case WM8962_ADCL_RETUNE_C27_1:
case WM8962_ADCL_RETUNE_C27_0:
case WM8962_ADCL_RETUNE_C28_1:
case WM8962_ADCL_RETUNE_C28_0:
case WM8962_ADCL_RETUNE_C29_1:
case WM8962_ADCL_RETUNE_C29_0:
case WM8962_ADCL_RETUNE_C30_1:
case WM8962_ADCL_RETUNE_C30_0:
case WM8962_ADCL_RETUNE_C31_1:
case WM8962_ADCL_RETUNE_C31_0:
case WM8962_ADCL_RETUNE_C32_1:
case WM8962_ADCL_RETUNE_C32_0:
case WM8962_RETUNEADC_PG2_1:
case WM8962_RETUNEADC_PG2_0:
case WM8962_RETUNEADC_PG_1:
case WM8962_RETUNEADC_PG_0:
case WM8962_ADCR_RETUNE_C1_1:
case WM8962_ADCR_RETUNE_C1_0:
case WM8962_ADCR_RETUNE_C2_1:
case WM8962_ADCR_RETUNE_C2_0:
case WM8962_ADCR_RETUNE_C3_1:
case WM8962_ADCR_RETUNE_C3_0:
case WM8962_ADCR_RETUNE_C4_1:
case WM8962_ADCR_RETUNE_C4_0:
case WM8962_ADCR_RETUNE_C5_1:
case WM8962_ADCR_RETUNE_C5_0:
case WM8962_ADCR_RETUNE_C6_1:
case WM8962_ADCR_RETUNE_C6_0:
case WM8962_ADCR_RETUNE_C7_1:
case WM8962_ADCR_RETUNE_C7_0:
case WM8962_ADCR_RETUNE_C8_1:
case WM8962_ADCR_RETUNE_C8_0:
case WM8962_ADCR_RETUNE_C9_1:
case WM8962_ADCR_RETUNE_C9_0:
case WM8962_ADCR_RETUNE_C10_1:
case WM8962_ADCR_RETUNE_C10_0:
case WM8962_ADCR_RETUNE_C11_1:
case WM8962_ADCR_RETUNE_C11_0:
case WM8962_ADCR_RETUNE_C12_1:
case WM8962_ADCR_RETUNE_C12_0:
case WM8962_ADCR_RETUNE_C13_1:
case WM8962_ADCR_RETUNE_C13_0:
case WM8962_ADCR_RETUNE_C14_1:
case WM8962_ADCR_RETUNE_C14_0:
case WM8962_ADCR_RETUNE_C15_1:
case WM8962_ADCR_RETUNE_C15_0:
case WM8962_ADCR_RETUNE_C16_1:
case WM8962_ADCR_RETUNE_C16_0:
case WM8962_ADCR_RETUNE_C17_1:
case WM8962_ADCR_RETUNE_C17_0:
case WM8962_ADCR_RETUNE_C18_1:
case WM8962_ADCR_RETUNE_C18_0:
case WM8962_ADCR_RETUNE_C19_1:
case WM8962_ADCR_RETUNE_C19_0:
case WM8962_ADCR_RETUNE_C20_1:
case WM8962_ADCR_RETUNE_C20_0:
case WM8962_ADCR_RETUNE_C21_1:
case WM8962_ADCR_RETUNE_C21_0:
case WM8962_ADCR_RETUNE_C22_1:
case WM8962_ADCR_RETUNE_C22_0:
case WM8962_ADCR_RETUNE_C23_1:
case WM8962_ADCR_RETUNE_C23_0:
case WM8962_ADCR_RETUNE_C24_1:
case WM8962_ADCR_RETUNE_C24_0:
case WM8962_ADCR_RETUNE_C25_1:
case WM8962_ADCR_RETUNE_C25_0:
case WM8962_ADCR_RETUNE_C26_1:
case WM8962_ADCR_RETUNE_C26_0:
case WM8962_ADCR_RETUNE_C27_1:
case WM8962_ADCR_RETUNE_C27_0:
case WM8962_ADCR_RETUNE_C28_1:
case WM8962_ADCR_RETUNE_C28_0:
case WM8962_ADCR_RETUNE_C29_1:
case WM8962_ADCR_RETUNE_C29_0:
case WM8962_ADCR_RETUNE_C30_1:
case WM8962_ADCR_RETUNE_C30_0:
case WM8962_ADCR_RETUNE_C31_1:
case WM8962_ADCR_RETUNE_C31_0:
case WM8962_ADCR_RETUNE_C32_1:
case WM8962_ADCR_RETUNE_C32_0:
case WM8962_DACL_RETUNE_C1_1:
case WM8962_DACL_RETUNE_C1_0:
case WM8962_DACL_RETUNE_C2_1:
case WM8962_DACL_RETUNE_C2_0:
case WM8962_DACL_RETUNE_C3_1:
case WM8962_DACL_RETUNE_C3_0:
case WM8962_DACL_RETUNE_C4_1:
case WM8962_DACL_RETUNE_C4_0:
case WM8962_DACL_RETUNE_C5_1:
case WM8962_DACL_RETUNE_C5_0:
case WM8962_DACL_RETUNE_C6_1:
case WM8962_DACL_RETUNE_C6_0:
case WM8962_DACL_RETUNE_C7_1:
case WM8962_DACL_RETUNE_C7_0:
case WM8962_DACL_RETUNE_C8_1:
case WM8962_DACL_RETUNE_C8_0:
case WM8962_DACL_RETUNE_C9_1:
case WM8962_DACL_RETUNE_C9_0:
case WM8962_DACL_RETUNE_C10_1:
case WM8962_DACL_RETUNE_C10_0:
case WM8962_DACL_RETUNE_C11_1:
case WM8962_DACL_RETUNE_C11_0:
case WM8962_DACL_RETUNE_C12_1:
case WM8962_DACL_RETUNE_C12_0:
case WM8962_DACL_RETUNE_C13_1:
case WM8962_DACL_RETUNE_C13_0:
case WM8962_DACL_RETUNE_C14_1:
case WM8962_DACL_RETUNE_C14_0:
case WM8962_DACL_RETUNE_C15_1:
case WM8962_DACL_RETUNE_C15_0:
case WM8962_DACL_RETUNE_C16_1:
case WM8962_DACL_RETUNE_C16_0:
case WM8962_DACL_RETUNE_C17_1:
case WM8962_DACL_RETUNE_C17_0:
case WM8962_DACL_RETUNE_C18_1:
case WM8962_DACL_RETUNE_C18_0:
case WM8962_DACL_RETUNE_C19_1:
case WM8962_DACL_RETUNE_C19_0:
case WM8962_DACL_RETUNE_C20_1:
case WM8962_DACL_RETUNE_C20_0:
case WM8962_DACL_RETUNE_C21_1:
case WM8962_DACL_RETUNE_C21_0:
case WM8962_DACL_RETUNE_C22_1:
case WM8962_DACL_RETUNE_C22_0:
case WM8962_DACL_RETUNE_C23_1:
case WM8962_DACL_RETUNE_C23_0:
case WM8962_DACL_RETUNE_C24_1:
case WM8962_DACL_RETUNE_C24_0:
case WM8962_DACL_RETUNE_C25_1:
case WM8962_DACL_RETUNE_C25_0:
case WM8962_DACL_RETUNE_C26_1:
case WM8962_DACL_RETUNE_C26_0:
case WM8962_DACL_RETUNE_C27_1:
case WM8962_DACL_RETUNE_C27_0:
case WM8962_DACL_RETUNE_C28_1:
case WM8962_DACL_RETUNE_C28_0:
case WM8962_DACL_RETUNE_C29_1:
case WM8962_DACL_RETUNE_C29_0:
case WM8962_DACL_RETUNE_C30_1:
case WM8962_DACL_RETUNE_C30_0:
case WM8962_DACL_RETUNE_C31_1:
case WM8962_DACL_RETUNE_C31_0:
case WM8962_DACL_RETUNE_C32_1:
case WM8962_DACL_RETUNE_C32_0:
case WM8962_RETUNEDAC_PG2_1:
case WM8962_RETUNEDAC_PG2_0:
case WM8962_RETUNEDAC_PG_1:
case WM8962_RETUNEDAC_PG_0:
case WM8962_DACR_RETUNE_C1_1:
case WM8962_DACR_RETUNE_C1_0:
case WM8962_DACR_RETUNE_C2_1:
case WM8962_DACR_RETUNE_C2_0:
case WM8962_DACR_RETUNE_C3_1:
case WM8962_DACR_RETUNE_C3_0:
case WM8962_DACR_RETUNE_C4_1:
case WM8962_DACR_RETUNE_C4_0:
case WM8962_DACR_RETUNE_C5_1:
case WM8962_DACR_RETUNE_C5_0:
case WM8962_DACR_RETUNE_C6_1:
case WM8962_DACR_RETUNE_C6_0:
case WM8962_DACR_RETUNE_C7_1:
case WM8962_DACR_RETUNE_C7_0:
case WM8962_DACR_RETUNE_C8_1:
case WM8962_DACR_RETUNE_C8_0:
case WM8962_DACR_RETUNE_C9_1:
case WM8962_DACR_RETUNE_C9_0:
case WM8962_DACR_RETUNE_C10_1:
case WM8962_DACR_RETUNE_C10_0:
case WM8962_DACR_RETUNE_C11_1:
case WM8962_DACR_RETUNE_C11_0:
case WM8962_DACR_RETUNE_C12_1:
case WM8962_DACR_RETUNE_C12_0:
case WM8962_DACR_RETUNE_C13_1:
case WM8962_DACR_RETUNE_C13_0:
case WM8962_DACR_RETUNE_C14_1:
case WM8962_DACR_RETUNE_C14_0:
case WM8962_DACR_RETUNE_C15_1:
case WM8962_DACR_RETUNE_C15_0:
case WM8962_DACR_RETUNE_C16_1:
case WM8962_DACR_RETUNE_C16_0:
case WM8962_DACR_RETUNE_C17_1:
case WM8962_DACR_RETUNE_C17_0:
case WM8962_DACR_RETUNE_C18_1:
case WM8962_DACR_RETUNE_C18_0:
case WM8962_DACR_RETUNE_C19_1:
case WM8962_DACR_RETUNE_C19_0:
case WM8962_DACR_RETUNE_C20_1:
case WM8962_DACR_RETUNE_C20_0:
case WM8962_DACR_RETUNE_C21_1:
case WM8962_DACR_RETUNE_C21_0:
case WM8962_DACR_RETUNE_C22_1:
case WM8962_DACR_RETUNE_C22_0:
case WM8962_DACR_RETUNE_C23_1:
case WM8962_DACR_RETUNE_C23_0:
case WM8962_DACR_RETUNE_C24_1:
case WM8962_DACR_RETUNE_C24_0:
case WM8962_DACR_RETUNE_C25_1:
case WM8962_DACR_RETUNE_C25_0:
case WM8962_DACR_RETUNE_C26_1:
case WM8962_DACR_RETUNE_C26_0:
case WM8962_DACR_RETUNE_C27_1:
case WM8962_DACR_RETUNE_C27_0:
case WM8962_DACR_RETUNE_C28_1:
case WM8962_DACR_RETUNE_C28_0:
case WM8962_DACR_RETUNE_C29_1:
case WM8962_DACR_RETUNE_C29_0:
case WM8962_DACR_RETUNE_C30_1:
case WM8962_DACR_RETUNE_C30_0:
case WM8962_DACR_RETUNE_C31_1:
case WM8962_DACR_RETUNE_C31_0:
case WM8962_DACR_RETUNE_C32_1:
case WM8962_DACR_RETUNE_C32_0:
case WM8962_VSS_XHD2_1:
case WM8962_VSS_XHD2_0:
case WM8962_VSS_XHD3_1:
case WM8962_VSS_XHD3_0:
case WM8962_VSS_XHN1_1:
case WM8962_VSS_XHN1_0:
case WM8962_VSS_XHN2_1:
case WM8962_VSS_XHN2_0:
case WM8962_VSS_XHN3_1:
case WM8962_VSS_XHN3_0:
case WM8962_VSS_XLA_1:
case WM8962_VSS_XLA_0:
case WM8962_VSS_XLB_1:
case WM8962_VSS_XLB_0:
case WM8962_VSS_XLG_1:
case WM8962_VSS_XLG_0:
case WM8962_VSS_PG2_1:
case WM8962_VSS_PG2_0:
case WM8962_VSS_PG_1:
case WM8962_VSS_PG_0:
case WM8962_VSS_XTD1_1:
case WM8962_VSS_XTD1_0:
case WM8962_VSS_XTD2_1:
case WM8962_VSS_XTD2_0:
case WM8962_VSS_XTD3_1:
case WM8962_VSS_XTD3_0:
case WM8962_VSS_XTD4_1:
case WM8962_VSS_XTD4_0:
case WM8962_VSS_XTD5_1:
case WM8962_VSS_XTD5_0:
case WM8962_VSS_XTD6_1:
case WM8962_VSS_XTD6_0:
case WM8962_VSS_XTD7_1:
case WM8962_VSS_XTD7_0:
case WM8962_VSS_XTD8_1:
case WM8962_VSS_XTD8_0:
case WM8962_VSS_XTD9_1:
case WM8962_VSS_XTD9_0:
case WM8962_VSS_XTD10_1:
case WM8962_VSS_XTD10_0:
case WM8962_VSS_XTD11_1:
case WM8962_VSS_XTD11_0:
case WM8962_VSS_XTD12_1:
case WM8962_VSS_XTD12_0:
case WM8962_VSS_XTD13_1:
case WM8962_VSS_XTD13_0:
case WM8962_VSS_XTD14_1:
case WM8962_VSS_XTD14_0:
case WM8962_VSS_XTD15_1:
case WM8962_VSS_XTD15_0:
case WM8962_VSS_XTD16_1:
case WM8962_VSS_XTD16_0:
case WM8962_VSS_XTD17_1:
case WM8962_VSS_XTD17_0:
case WM8962_VSS_XTD18_1:
case WM8962_VSS_XTD18_0:
case WM8962_VSS_XTD19_1:
case WM8962_VSS_XTD19_0:
case WM8962_VSS_XTD20_1:
case WM8962_VSS_XTD20_0:
case WM8962_VSS_XTD21_1:
case WM8962_VSS_XTD21_0:
case WM8962_VSS_XTD22_1:
case WM8962_VSS_XTD22_0:
case WM8962_VSS_XTD23_1:
case WM8962_VSS_XTD23_0:
case WM8962_VSS_XTD24_1:
case WM8962_VSS_XTD24_0:
case WM8962_VSS_XTD25_1:
case WM8962_VSS_XTD25_0:
case WM8962_VSS_XTD26_1:
case WM8962_VSS_XTD26_0:
case WM8962_VSS_XTD27_1:
case WM8962_VSS_XTD27_0:
case WM8962_VSS_XTD28_1:
case WM8962_VSS_XTD28_0:
case WM8962_VSS_XTD29_1:
case WM8962_VSS_XTD29_0:
case WM8962_VSS_XTD30_1:
case WM8962_VSS_XTD30_0:
case WM8962_VSS_XTD31_1:
case WM8962_VSS_XTD31_0:
case WM8962_VSS_XTD32_1:
case WM8962_VSS_XTD32_0:
case WM8962_VSS_XTS1_1:
case WM8962_VSS_XTS1_0:
case WM8962_VSS_XTS2_1:
case WM8962_VSS_XTS2_0:
case WM8962_VSS_XTS3_1:
case WM8962_VSS_XTS3_0:
case WM8962_VSS_XTS4_1:
case WM8962_VSS_XTS4_0:
case WM8962_VSS_XTS5_1:
case WM8962_VSS_XTS5_0:
case WM8962_VSS_XTS6_1:
case WM8962_VSS_XTS6_0:
case WM8962_VSS_XTS7_1:
case WM8962_VSS_XTS7_0:
case WM8962_VSS_XTS8_1:
case WM8962_VSS_XTS8_0:
case WM8962_VSS_XTS9_1:
case WM8962_VSS_XTS9_0:
case WM8962_VSS_XTS10_1:
case WM8962_VSS_XTS10_0:
case WM8962_VSS_XTS11_1:
case WM8962_VSS_XTS11_0:
case WM8962_VSS_XTS12_1:
case WM8962_VSS_XTS12_0:
case WM8962_VSS_XTS13_1:
case WM8962_VSS_XTS13_0:
case WM8962_VSS_XTS14_1:
case WM8962_VSS_XTS14_0:
case WM8962_VSS_XTS15_1:
case WM8962_VSS_XTS15_0:
case WM8962_VSS_XTS16_1:
case WM8962_VSS_XTS16_0:
case WM8962_VSS_XTS17_1:
case WM8962_VSS_XTS17_0:
case WM8962_VSS_XTS18_1:
case WM8962_VSS_XTS18_0:
case WM8962_VSS_XTS19_1:
case WM8962_VSS_XTS19_0:
case WM8962_VSS_XTS20_1:
case WM8962_VSS_XTS20_0:
case WM8962_VSS_XTS21_1:
case WM8962_VSS_XTS21_0:
case WM8962_VSS_XTS22_1:
case WM8962_VSS_XTS22_0:
case WM8962_VSS_XTS23_1:
case WM8962_VSS_XTS23_0:
case WM8962_VSS_XTS24_1:
case WM8962_VSS_XTS24_0:
case WM8962_VSS_XTS25_1:
case WM8962_VSS_XTS25_0:
case WM8962_VSS_XTS26_1:
case WM8962_VSS_XTS26_0:
case WM8962_VSS_XTS27_1:
case WM8962_VSS_XTS27_0:
case WM8962_VSS_XTS28_1:
case WM8962_VSS_XTS28_0:
case WM8962_VSS_XTS29_1:
case WM8962_VSS_XTS29_0:
case WM8962_VSS_XTS30_1:
case WM8962_VSS_XTS30_0:
case WM8962_VSS_XTS31_1:
case WM8962_VSS_XTS31_0:
case WM8962_VSS_XTS32_1:
case WM8962_VSS_XTS32_0:
return true;
default:
return false;
}
}
static int wm8962_reset(struct wm8962_priv *wm8962)
{
int ret;
ret = regmap_write(wm8962->regmap, WM8962_SOFTWARE_RESET, 0x6243);
if (ret != 0)
return ret;
return regmap_write(wm8962->regmap, WM8962_PLL_SOFTWARE_RESET, 0);
}
static const DECLARE_TLV_DB_SCALE(inpga_tlv, -2325, 75, 0);
static const DECLARE_TLV_DB_SCALE(mixin_tlv, -1500, 300, 0);
static const unsigned int mixinpga_tlv[] = {
TLV_DB_RANGE_HEAD(5),
0, 1, TLV_DB_SCALE_ITEM(0, 600, 0),
2, 2, TLV_DB_SCALE_ITEM(1300, 1300, 0),
3, 4, TLV_DB_SCALE_ITEM(1800, 200, 0),
5, 5, TLV_DB_SCALE_ITEM(2400, 0, 0),
6, 7, TLV_DB_SCALE_ITEM(2700, 300, 0),
};
static const DECLARE_TLV_DB_SCALE(beep_tlv, -9600, 600, 1);
static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
static const DECLARE_TLV_DB_SCALE(st_tlv, -3600, 300, 0);
static const DECLARE_TLV_DB_SCALE(inmix_tlv, -600, 600, 0);
static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0);
static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
static const DECLARE_TLV_DB_SCALE(hp_tlv, -700, 100, 0);
static const unsigned int classd_tlv[] = {
TLV_DB_RANGE_HEAD(2),
0, 6, TLV_DB_SCALE_ITEM(0, 150, 0),
7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0),
};
static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
static int wm8962_dsp2_write_config(struct snd_soc_codec *codec)
{
return 0;
}
static int wm8962_dsp2_set_enable(struct snd_soc_codec *codec, u16 val)
{
u16 adcl = snd_soc_read(codec, WM8962_LEFT_ADC_VOLUME);
u16 adcr = snd_soc_read(codec, WM8962_RIGHT_ADC_VOLUME);
u16 dac = snd_soc_read(codec, WM8962_ADC_DAC_CONTROL_1);
/* Mute the ADCs and DACs */
snd_soc_write(codec, WM8962_LEFT_ADC_VOLUME, 0);
snd_soc_write(codec, WM8962_RIGHT_ADC_VOLUME, WM8962_ADC_VU);
snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1,
WM8962_DAC_MUTE, WM8962_DAC_MUTE);
snd_soc_write(codec, WM8962_SOUNDSTAGE_ENABLES_0, val);
/* Restore the ADCs and DACs */
snd_soc_write(codec, WM8962_LEFT_ADC_VOLUME, adcl);
snd_soc_write(codec, WM8962_RIGHT_ADC_VOLUME, adcr);
snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1,
WM8962_DAC_MUTE, dac);
return 0;
}
static int wm8962_dsp2_start(struct snd_soc_codec *codec)
{
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
wm8962_dsp2_write_config(codec);
snd_soc_write(codec, WM8962_DSP2_EXECCONTROL, WM8962_DSP2_RUNR);
wm8962_dsp2_set_enable(codec, wm8962->dsp2_ena);
return 0;
}
static int wm8962_dsp2_stop(struct snd_soc_codec *codec)
{
wm8962_dsp2_set_enable(codec, 0);
snd_soc_write(codec, WM8962_DSP2_EXECCONTROL, WM8962_DSP2_STOP);
return 0;
}
#define WM8962_DSP2_ENABLE(xname, xshift) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = wm8962_dsp2_ena_info, \
.get = wm8962_dsp2_ena_get, .put = wm8962_dsp2_ena_put, \
.private_value = xshift }
static int wm8962_dsp2_ena_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
uinfo->count = 1;
uinfo->value.integer.min = 0;
uinfo->value.integer.max = 1;
return 0;
}
static int wm8962_dsp2_ena_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
int shift = kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
ucontrol->value.integer.value[0] = !!(wm8962->dsp2_ena & 1 << shift);
return 0;
}
static int wm8962_dsp2_ena_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
int shift = kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
int old = wm8962->dsp2_ena;
int ret = 0;
int dsp2_running = snd_soc_read(codec, WM8962_DSP2_POWER_MANAGEMENT) &
WM8962_DSP2_ENA;
mutex_lock(&codec->mutex);
if (ucontrol->value.integer.value[0])
wm8962->dsp2_ena |= 1 << shift;
else
wm8962->dsp2_ena &= ~(1 << shift);
if (wm8962->dsp2_ena == old)
goto out;
ret = 1;
if (dsp2_running) {
if (wm8962->dsp2_ena)
wm8962_dsp2_set_enable(codec, wm8962->dsp2_ena);
else
wm8962_dsp2_stop(codec);
}
out:
mutex_unlock(&codec->mutex);
return ret;
}
/* The VU bits for the headphones are in a different register to the mute
* bits and only take effect on the PGA if it is actually powered.
*/
static int wm8962_put_hp_sw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
u16 *reg_cache = codec->reg_cache;
int ret;
/* Apply the update (if any) */
ret = snd_soc_put_volsw(kcontrol, ucontrol);
if (ret == 0)
return 0;
/* If the left PGA is enabled hit that VU bit... */
if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTL_PGA_ENA)
return snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
reg_cache[WM8962_HPOUTL_VOLUME]);
/* ...otherwise the right. The VU is stereo. */
if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTR_PGA_ENA)
return snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
reg_cache[WM8962_HPOUTR_VOLUME]);
return 0;
}
/* The VU bits for the speakers are in a different register to the mute
* bits and only take effect on the PGA if it is actually powered.
*/
static int wm8962_put_spk_sw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
int ret;
/* Apply the update (if any) */
ret = snd_soc_put_volsw(kcontrol, ucontrol);
if (ret == 0)
return 0;
/* If the left PGA is enabled hit that VU bit... */
ret = snd_soc_read(codec, WM8962_PWR_MGMT_2);
if (ret & WM8962_SPKOUTL_PGA_ENA) {
snd_soc_write(codec, WM8962_SPKOUTL_VOLUME,
snd_soc_read(codec, WM8962_SPKOUTL_VOLUME));
return 1;
}
/* ...otherwise the right. The VU is stereo. */
if (ret & WM8962_SPKOUTR_PGA_ENA)
snd_soc_write(codec, WM8962_SPKOUTR_VOLUME,
snd_soc_read(codec, WM8962_SPKOUTR_VOLUME));
return 1;
}
static const char *cap_hpf_mode_text[] = {
"Hi-fi", "Application"
};
static const struct soc_enum cap_hpf_mode =
SOC_ENUM_SINGLE(WM8962_ADC_DAC_CONTROL_2, 10, 2, cap_hpf_mode_text);
static const char *cap_lhpf_mode_text[] = {
"LPF", "HPF"
};
static const struct soc_enum cap_lhpf_mode =
SOC_ENUM_SINGLE(WM8962_LHPF1, 1, 2, cap_lhpf_mode_text);
static const struct snd_kcontrol_new wm8962_snd_controls[] = {
SOC_DOUBLE("Input Mixer Switch", WM8962_INPUT_MIXER_CONTROL_1, 3, 2, 1, 1),
SOC_SINGLE_TLV("MIXINL IN2L Volume", WM8962_LEFT_INPUT_MIXER_VOLUME, 6, 7, 0,
mixin_tlv),
SOC_SINGLE_TLV("MIXINL PGA Volume", WM8962_LEFT_INPUT_MIXER_VOLUME, 3, 7, 0,
mixinpga_tlv),
SOC_SINGLE_TLV("MIXINL IN3L Volume", WM8962_LEFT_INPUT_MIXER_VOLUME, 0, 7, 0,
mixin_tlv),
SOC_SINGLE_TLV("MIXINR IN2R Volume", WM8962_RIGHT_INPUT_MIXER_VOLUME, 6, 7, 0,
mixin_tlv),
SOC_SINGLE_TLV("MIXINR PGA Volume", WM8962_RIGHT_INPUT_MIXER_VOLUME, 3, 7, 0,
mixinpga_tlv),
SOC_SINGLE_TLV("MIXINR IN3R Volume", WM8962_RIGHT_INPUT_MIXER_VOLUME, 0, 7, 0,
mixin_tlv),
SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8962_LEFT_ADC_VOLUME,
WM8962_RIGHT_ADC_VOLUME, 1, 127, 0, digital_tlv),
SOC_DOUBLE_R_TLV("Capture Volume", WM8962_LEFT_INPUT_VOLUME,
WM8962_RIGHT_INPUT_VOLUME, 0, 63, 0, inpga_tlv),
SOC_DOUBLE_R("Capture Switch", WM8962_LEFT_INPUT_VOLUME,
WM8962_RIGHT_INPUT_VOLUME, 7, 1, 1),
SOC_DOUBLE_R("Capture ZC Switch", WM8962_LEFT_INPUT_VOLUME,
WM8962_RIGHT_INPUT_VOLUME, 6, 1, 1),
SOC_SINGLE("Capture HPF Switch", WM8962_ADC_DAC_CONTROL_1, 0, 1, 1),
SOC_ENUM("Capture HPF Mode", cap_hpf_mode),
SOC_SINGLE("Capture HPF Cutoff", WM8962_ADC_DAC_CONTROL_2, 7, 7, 0),
SOC_SINGLE("Capture LHPF Switch", WM8962_LHPF1, 0, 1, 0),
SOC_ENUM("Capture LHPF Mode", cap_lhpf_mode),
SOC_DOUBLE_R_TLV("Sidetone Volume", WM8962_DAC_DSP_MIXING_1,
WM8962_DAC_DSP_MIXING_2, 4, 12, 0, st_tlv),
SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8962_LEFT_DAC_VOLUME,
WM8962_RIGHT_DAC_VOLUME, 1, 127, 0, digital_tlv),
SOC_SINGLE("DAC High Performance Switch", WM8962_ADC_DAC_CONTROL_2, 0, 1, 0),
SOC_SINGLE("DAC L/R Swap Switch", WM8962_AUDIO_INTERFACE_0, 5, 1, 0),
SOC_SINGLE("ADC L/R Swap Switch", WM8962_AUDIO_INTERFACE_0, 8, 1, 0),
SOC_SINGLE("ADC High Performance Switch", WM8962_ADDITIONAL_CONTROL_1,
5, 1, 0),
SOC_SINGLE_TLV("Beep Volume", WM8962_BEEP_GENERATOR_1, 4, 15, 0, beep_tlv),
SOC_DOUBLE_R_TLV("Headphone Volume", WM8962_HPOUTL_VOLUME,
WM8962_HPOUTR_VOLUME, 0, 127, 0, out_tlv),
SOC_DOUBLE_EXT("Headphone Switch", WM8962_PWR_MGMT_2, 1, 0, 1, 1,
snd_soc_get_volsw, wm8962_put_hp_sw),
SOC_DOUBLE_R("Headphone ZC Switch", WM8962_HPOUTL_VOLUME, WM8962_HPOUTR_VOLUME,
7, 1, 0),
SOC_DOUBLE_TLV("Headphone Aux Volume", WM8962_ANALOGUE_HP_2, 3, 6, 7, 0,
hp_tlv),
SOC_DOUBLE_R("Headphone Mixer Switch", WM8962_HEADPHONE_MIXER_3,
WM8962_HEADPHONE_MIXER_4, 8, 1, 1),
SOC_SINGLE_TLV("HPMIXL IN4L Volume", WM8962_HEADPHONE_MIXER_3,
3, 7, 0, bypass_tlv),
SOC_SINGLE_TLV("HPMIXL IN4R Volume", WM8962_HEADPHONE_MIXER_3,
0, 7, 0, bypass_tlv),
SOC_SINGLE_TLV("HPMIXL MIXINL Volume", WM8962_HEADPHONE_MIXER_3,
7, 1, 1, inmix_tlv),
SOC_SINGLE_TLV("HPMIXL MIXINR Volume", WM8962_HEADPHONE_MIXER_3,
6, 1, 1, inmix_tlv),
SOC_SINGLE_TLV("HPMIXR IN4L Volume", WM8962_HEADPHONE_MIXER_4,
3, 7, 0, bypass_tlv),
SOC_SINGLE_TLV("HPMIXR IN4R Volume", WM8962_HEADPHONE_MIXER_4,
0, 7, 0, bypass_tlv),
SOC_SINGLE_TLV("HPMIXR MIXINL Volume", WM8962_HEADPHONE_MIXER_4,
7, 1, 1, inmix_tlv),
SOC_SINGLE_TLV("HPMIXR MIXINR Volume", WM8962_HEADPHONE_MIXER_4,
6, 1, 1, inmix_tlv),
SOC_SINGLE_TLV("Speaker Boost Volume", WM8962_CLASS_D_CONTROL_2, 0, 7, 0,
classd_tlv),
SOC_SINGLE("EQ Switch", WM8962_EQ1, WM8962_EQ_ENA_SHIFT, 1, 0),
SOC_DOUBLE_R_TLV("EQ1 Volume", WM8962_EQ2, WM8962_EQ22,
WM8962_EQL_B1_GAIN_SHIFT, 31, 0, eq_tlv),
SOC_DOUBLE_R_TLV("EQ2 Volume", WM8962_EQ2, WM8962_EQ22,
WM8962_EQL_B2_GAIN_SHIFT, 31, 0, eq_tlv),
SOC_DOUBLE_R_TLV("EQ3 Volume", WM8962_EQ2, WM8962_EQ22,
WM8962_EQL_B3_GAIN_SHIFT, 31, 0, eq_tlv),
SOC_DOUBLE_R_TLV("EQ4 Volume", WM8962_EQ3, WM8962_EQ23,
WM8962_EQL_B4_GAIN_SHIFT, 31, 0, eq_tlv),
SOC_DOUBLE_R_TLV("EQ5 Volume", WM8962_EQ3, WM8962_EQ23,
WM8962_EQL_B5_GAIN_SHIFT, 31, 0, eq_tlv),
WM8962_DSP2_ENABLE("VSS Switch", WM8962_VSS_ENA_SHIFT),
WM8962_DSP2_ENABLE("HPF1 Switch", WM8962_HPF1_ENA_SHIFT),
WM8962_DSP2_ENABLE("HPF2 Switch", WM8962_HPF2_ENA_SHIFT),
WM8962_DSP2_ENABLE("HD Bass Switch", WM8962_HDBASS_ENA_SHIFT),
};
static const struct snd_kcontrol_new wm8962_spk_mono_controls[] = {
SOC_SINGLE_TLV("Speaker Volume", WM8962_SPKOUTL_VOLUME, 0, 127, 0, out_tlv),
SOC_SINGLE_EXT("Speaker Switch", WM8962_CLASS_D_CONTROL_1, 1, 1, 1,
snd_soc_get_volsw, wm8962_put_spk_sw),
SOC_SINGLE("Speaker ZC Switch", WM8962_SPKOUTL_VOLUME, 7, 1, 0),
SOC_SINGLE("Speaker Mixer Switch", WM8962_SPEAKER_MIXER_3, 8, 1, 1),
SOC_SINGLE_TLV("Speaker Mixer IN4L Volume", WM8962_SPEAKER_MIXER_3,
3, 7, 0, bypass_tlv),
SOC_SINGLE_TLV("Speaker Mixer IN4R Volume", WM8962_SPEAKER_MIXER_3,
0, 7, 0, bypass_tlv),
SOC_SINGLE_TLV("Speaker Mixer MIXINL Volume", WM8962_SPEAKER_MIXER_3,
7, 1, 1, inmix_tlv),
SOC_SINGLE_TLV("Speaker Mixer MIXINR Volume", WM8962_SPEAKER_MIXER_3,
6, 1, 1, inmix_tlv),
SOC_SINGLE_TLV("Speaker Mixer DACL Volume", WM8962_SPEAKER_MIXER_5,
7, 1, 0, inmix_tlv),
SOC_SINGLE_TLV("Speaker Mixer DACR Volume", WM8962_SPEAKER_MIXER_5,
6, 1, 0, inmix_tlv),
};
static const struct snd_kcontrol_new wm8962_spk_stereo_controls[] = {
SOC_DOUBLE_R_TLV("Speaker Volume", WM8962_SPKOUTL_VOLUME,
WM8962_SPKOUTR_VOLUME, 0, 127, 0, out_tlv),
SOC_DOUBLE_EXT("Speaker Switch", WM8962_CLASS_D_CONTROL_1, 1, 0, 1, 1,
snd_soc_get_volsw, wm8962_put_spk_sw),
SOC_DOUBLE_R("Speaker ZC Switch", WM8962_SPKOUTL_VOLUME, WM8962_SPKOUTR_VOLUME,
7, 1, 0),
SOC_DOUBLE_R("Speaker Mixer Switch", WM8962_SPEAKER_MIXER_3,
WM8962_SPEAKER_MIXER_4, 8, 1, 1),
SOC_SINGLE_TLV("SPKOUTL Mixer IN4L Volume", WM8962_SPEAKER_MIXER_3,
3, 7, 0, bypass_tlv),
SOC_SINGLE_TLV("SPKOUTL Mixer IN4R Volume", WM8962_SPEAKER_MIXER_3,
0, 7, 0, bypass_tlv),
SOC_SINGLE_TLV("SPKOUTL Mixer MIXINL Volume", WM8962_SPEAKER_MIXER_3,
7, 1, 1, inmix_tlv),
SOC_SINGLE_TLV("SPKOUTL Mixer MIXINR Volume", WM8962_SPEAKER_MIXER_3,
6, 1, 1, inmix_tlv),
SOC_SINGLE_TLV("SPKOUTL Mixer DACL Volume", WM8962_SPEAKER_MIXER_5,
7, 1, 0, inmix_tlv),
SOC_SINGLE_TLV("SPKOUTL Mixer DACR Volume", WM8962_SPEAKER_MIXER_5,
6, 1, 0, inmix_tlv),
SOC_SINGLE_TLV("SPKOUTR Mixer IN4L Volume", WM8962_SPEAKER_MIXER_4,
3, 7, 0, bypass_tlv),
SOC_SINGLE_TLV("SPKOUTR Mixer IN4R Volume", WM8962_SPEAKER_MIXER_4,
0, 7, 0, bypass_tlv),
SOC_SINGLE_TLV("SPKOUTR Mixer MIXINL Volume", WM8962_SPEAKER_MIXER_4,
7, 1, 1, inmix_tlv),
SOC_SINGLE_TLV("SPKOUTR Mixer MIXINR Volume", WM8962_SPEAKER_MIXER_4,
6, 1, 1, inmix_tlv),
SOC_SINGLE_TLV("SPKOUTR Mixer DACL Volume", WM8962_SPEAKER_MIXER_5,
5, 1, 0, inmix_tlv),
SOC_SINGLE_TLV("SPKOUTR Mixer DACR Volume", WM8962_SPEAKER_MIXER_5,
4, 1, 0, inmix_tlv),
};
static int cp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
switch (event) {
case SND_SOC_DAPM_POST_PMU:
msleep(5);
break;
default:
BUG();
return -EINVAL;
}
return 0;
}
static int hp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
int timeout;
int reg;
int expected = (WM8962_DCS_STARTUP_DONE_HP1L |
WM8962_DCS_STARTUP_DONE_HP1R);
switch (event) {
case SND_SOC_DAPM_POST_PMU:
snd_soc_update_bits(codec, WM8962_ANALOGUE_HP_0,
WM8962_HP1L_ENA | WM8962_HP1R_ENA,
WM8962_HP1L_ENA | WM8962_HP1R_ENA);
udelay(20);
snd_soc_update_bits(codec, WM8962_ANALOGUE_HP_0,
WM8962_HP1L_ENA_DLY | WM8962_HP1R_ENA_DLY,
WM8962_HP1L_ENA_DLY | WM8962_HP1R_ENA_DLY);
/* Start the DC servo */
snd_soc_update_bits(codec, WM8962_DC_SERVO_1,
WM8962_HP1L_DCS_ENA | WM8962_HP1R_DCS_ENA |
WM8962_HP1L_DCS_STARTUP |
WM8962_HP1R_DCS_STARTUP,
WM8962_HP1L_DCS_ENA | WM8962_HP1R_DCS_ENA |
WM8962_HP1L_DCS_STARTUP |
WM8962_HP1R_DCS_STARTUP);
/* Wait for it to complete, should be well under 100ms */
timeout = 0;
do {
msleep(1);
reg = snd_soc_read(codec, WM8962_DC_SERVO_6);
if (reg < 0) {
dev_err(codec->dev,
"Failed to read DCS status: %d\n",
reg);
continue;
}
dev_dbg(codec->dev, "DCS status: %x\n", reg);
} while (++timeout < 200 && (reg & expected) != expected);
if ((reg & expected) != expected)
dev_err(codec->dev, "DC servo timed out\n");
else
dev_dbg(codec->dev, "DC servo complete after %dms\n",
timeout);
snd_soc_update_bits(codec, WM8962_ANALOGUE_HP_0,
WM8962_HP1L_ENA_OUTP |
WM8962_HP1R_ENA_OUTP,
WM8962_HP1L_ENA_OUTP |
WM8962_HP1R_ENA_OUTP);
udelay(20);
snd_soc_update_bits(codec, WM8962_ANALOGUE_HP_0,
WM8962_HP1L_RMV_SHORT |
WM8962_HP1R_RMV_SHORT,
WM8962_HP1L_RMV_SHORT |
WM8962_HP1R_RMV_SHORT);
break;
case SND_SOC_DAPM_PRE_PMD:
snd_soc_update_bits(codec, WM8962_ANALOGUE_HP_0,
WM8962_HP1L_RMV_SHORT |
WM8962_HP1R_RMV_SHORT, 0);
udelay(20);
snd_soc_update_bits(codec, WM8962_DC_SERVO_1,
WM8962_HP1L_DCS_ENA | WM8962_HP1R_DCS_ENA |
WM8962_HP1L_DCS_STARTUP |
WM8962_HP1R_DCS_STARTUP,
0);
snd_soc_update_bits(codec, WM8962_ANALOGUE_HP_0,
WM8962_HP1L_ENA | WM8962_HP1R_ENA |
WM8962_HP1L_ENA_DLY | WM8962_HP1R_ENA_DLY |
WM8962_HP1L_ENA_OUTP |
WM8962_HP1R_ENA_OUTP, 0);
break;
default:
BUG();
return -EINVAL;
}
return 0;
}
/* VU bits for the output PGAs only take effect while the PGA is powered */
static int out_pga_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
int reg;
switch (w->shift) {
case WM8962_HPOUTR_PGA_ENA_SHIFT:
reg = WM8962_HPOUTR_VOLUME;
break;
case WM8962_HPOUTL_PGA_ENA_SHIFT:
reg = WM8962_HPOUTL_VOLUME;
break;
case WM8962_SPKOUTR_PGA_ENA_SHIFT:
reg = WM8962_SPKOUTR_VOLUME;
break;
case WM8962_SPKOUTL_PGA_ENA_SHIFT:
reg = WM8962_SPKOUTL_VOLUME;
break;
default:
BUG();
return -EINVAL;
}
switch (event) {
case SND_SOC_DAPM_POST_PMU:
return snd_soc_write(codec, reg, snd_soc_read(codec, reg));
default:
BUG();
return -EINVAL;
}
}
static int dsp2_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
switch (event) {
case SND_SOC_DAPM_POST_PMU:
if (wm8962->dsp2_ena)
wm8962_dsp2_start(codec);
break;
case SND_SOC_DAPM_PRE_PMD:
if (wm8962->dsp2_ena)
wm8962_dsp2_stop(codec);
break;
default:
BUG();
return -EINVAL;
}
return 0;
}
static const char *st_text[] = { "None", "Right", "Left" };
static const struct soc_enum str_enum =
SOC_ENUM_SINGLE(WM8962_DAC_DSP_MIXING_1, 2, 3, st_text);
static const struct snd_kcontrol_new str_mux =
SOC_DAPM_ENUM("Right Sidetone", str_enum);
static const struct soc_enum stl_enum =
SOC_ENUM_SINGLE(WM8962_DAC_DSP_MIXING_2, 2, 3, st_text);
static const struct snd_kcontrol_new stl_mux =
SOC_DAPM_ENUM("Left Sidetone", stl_enum);
static const char *outmux_text[] = { "DAC", "Mixer" };
static const struct soc_enum spkoutr_enum =
SOC_ENUM_SINGLE(WM8962_SPEAKER_MIXER_2, 7, 2, outmux_text);
static const struct snd_kcontrol_new spkoutr_mux =
SOC_DAPM_ENUM("SPKOUTR Mux", spkoutr_enum);
static const struct soc_enum spkoutl_enum =
SOC_ENUM_SINGLE(WM8962_SPEAKER_MIXER_1, 7, 2, outmux_text);
static const struct snd_kcontrol_new spkoutl_mux =
SOC_DAPM_ENUM("SPKOUTL Mux", spkoutl_enum);
static const struct soc_enum hpoutr_enum =
SOC_ENUM_SINGLE(WM8962_HEADPHONE_MIXER_2, 7, 2, outmux_text);
static const struct snd_kcontrol_new hpoutr_mux =
SOC_DAPM_ENUM("HPOUTR Mux", hpoutr_enum);
static const struct soc_enum hpoutl_enum =
SOC_ENUM_SINGLE(WM8962_HEADPHONE_MIXER_1, 7, 2, outmux_text);
static const struct snd_kcontrol_new hpoutl_mux =
SOC_DAPM_ENUM("HPOUTL Mux", hpoutl_enum);
static const struct snd_kcontrol_new inpgal[] = {
SOC_DAPM_SINGLE("IN1L Switch", WM8962_LEFT_INPUT_PGA_CONTROL, 3, 1, 0),
SOC_DAPM_SINGLE("IN2L Switch", WM8962_LEFT_INPUT_PGA_CONTROL, 2, 1, 0),
SOC_DAPM_SINGLE("IN3L Switch", WM8962_LEFT_INPUT_PGA_CONTROL, 1, 1, 0),
SOC_DAPM_SINGLE("IN4L Switch", WM8962_LEFT_INPUT_PGA_CONTROL, 0, 1, 0),
};
static const struct snd_kcontrol_new inpgar[] = {
SOC_DAPM_SINGLE("IN1R Switch", WM8962_RIGHT_INPUT_PGA_CONTROL, 3, 1, 0),
SOC_DAPM_SINGLE("IN2R Switch", WM8962_RIGHT_INPUT_PGA_CONTROL, 2, 1, 0),
SOC_DAPM_SINGLE("IN3R Switch", WM8962_RIGHT_INPUT_PGA_CONTROL, 1, 1, 0),
SOC_DAPM_SINGLE("IN4R Switch", WM8962_RIGHT_INPUT_PGA_CONTROL, 0, 1, 0),
};
static const struct snd_kcontrol_new mixinl[] = {
SOC_DAPM_SINGLE("IN2L Switch", WM8962_INPUT_MIXER_CONTROL_2, 5, 1, 0),
SOC_DAPM_SINGLE("IN3L Switch", WM8962_INPUT_MIXER_CONTROL_2, 4, 1, 0),
SOC_DAPM_SINGLE("PGA Switch", WM8962_INPUT_MIXER_CONTROL_2, 3, 1, 0),
};
static const struct snd_kcontrol_new mixinr[] = {
SOC_DAPM_SINGLE("IN2R Switch", WM8962_INPUT_MIXER_CONTROL_2, 2, 1, 0),
SOC_DAPM_SINGLE("IN3R Switch", WM8962_INPUT_MIXER_CONTROL_2, 1, 1, 0),
SOC_DAPM_SINGLE("PGA Switch", WM8962_INPUT_MIXER_CONTROL_2, 0, 1, 0),
};
static const struct snd_kcontrol_new hpmixl[] = {
SOC_DAPM_SINGLE("DACL Switch", WM8962_HEADPHONE_MIXER_1, 5, 1, 0),
SOC_DAPM_SINGLE("DACR Switch", WM8962_HEADPHONE_MIXER_1, 4, 1, 0),
SOC_DAPM_SINGLE("MIXINL Switch", WM8962_HEADPHONE_MIXER_1, 3, 1, 0),
SOC_DAPM_SINGLE("MIXINR Switch", WM8962_HEADPHONE_MIXER_1, 2, 1, 0),
SOC_DAPM_SINGLE("IN4L Switch", WM8962_HEADPHONE_MIXER_1, 1, 1, 0),
SOC_DAPM_SINGLE("IN4R Switch", WM8962_HEADPHONE_MIXER_1, 0, 1, 0),
};
static const struct snd_kcontrol_new hpmixr[] = {
SOC_DAPM_SINGLE("DACL Switch", WM8962_HEADPHONE_MIXER_2, 5, 1, 0),
SOC_DAPM_SINGLE("DACR Switch", WM8962_HEADPHONE_MIXER_2, 4, 1, 0),
SOC_DAPM_SINGLE("MIXINL Switch", WM8962_HEADPHONE_MIXER_2, 3, 1, 0),
SOC_DAPM_SINGLE("MIXINR Switch", WM8962_HEADPHONE_MIXER_2, 2, 1, 0),
SOC_DAPM_SINGLE("IN4L Switch", WM8962_HEADPHONE_MIXER_2, 1, 1, 0),
SOC_DAPM_SINGLE("IN4R Switch", WM8962_HEADPHONE_MIXER_2, 0, 1, 0),
};
static const struct snd_kcontrol_new spkmixl[] = {
SOC_DAPM_SINGLE("DACL Switch", WM8962_SPEAKER_MIXER_1, 5, 1, 0),
SOC_DAPM_SINGLE("DACR Switch", WM8962_SPEAKER_MIXER_1, 4, 1, 0),
SOC_DAPM_SINGLE("MIXINL Switch", WM8962_SPEAKER_MIXER_1, 3, 1, 0),
SOC_DAPM_SINGLE("MIXINR Switch", WM8962_SPEAKER_MIXER_1, 2, 1, 0),
SOC_DAPM_SINGLE("IN4L Switch", WM8962_SPEAKER_MIXER_1, 1, 1, 0),
SOC_DAPM_SINGLE("IN4R Switch", WM8962_SPEAKER_MIXER_1, 0, 1, 0),
};
static const struct snd_kcontrol_new spkmixr[] = {
SOC_DAPM_SINGLE("DACL Switch", WM8962_SPEAKER_MIXER_2, 5, 1, 0),
SOC_DAPM_SINGLE("DACR Switch", WM8962_SPEAKER_MIXER_2, 4, 1, 0),
SOC_DAPM_SINGLE("MIXINL Switch", WM8962_SPEAKER_MIXER_2, 3, 1, 0),
SOC_DAPM_SINGLE("MIXINR Switch", WM8962_SPEAKER_MIXER_2, 2, 1, 0),
SOC_DAPM_SINGLE("IN4L Switch", WM8962_SPEAKER_MIXER_2, 1, 1, 0),
SOC_DAPM_SINGLE("IN4R Switch", WM8962_SPEAKER_MIXER_2, 0, 1, 0),
};
static const struct snd_soc_dapm_widget wm8962_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("IN1L"),
SND_SOC_DAPM_INPUT("IN1R"),
SND_SOC_DAPM_INPUT("IN2L"),
SND_SOC_DAPM_INPUT("IN2R"),
SND_SOC_DAPM_INPUT("IN3L"),
SND_SOC_DAPM_INPUT("IN3R"),
SND_SOC_DAPM_INPUT("IN4L"),
SND_SOC_DAPM_INPUT("IN4R"),
SND_SOC_DAPM_SIGGEN("Beep"),
SND_SOC_DAPM_INPUT("DMICDAT"),
SND_SOC_DAPM_SUPPLY("MICBIAS", WM8962_PWR_MGMT_1, 1, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("Class G", WM8962_CHARGE_PUMP_B, 0, 1, NULL, 0),
SND_SOC_DAPM_SUPPLY("SYSCLK", WM8962_CLOCKING2, 5, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("Charge Pump", WM8962_CHARGE_PUMP_1, 0, 0, cp_event,
SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_SUPPLY("TOCLK", WM8962_ADDITIONAL_CONTROL_1, 0, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("DSP2", 1, WM8962_DSP2_POWER_MANAGEMENT,
WM8962_DSP2_ENA_SHIFT, 0, dsp2_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_SUPPLY("TEMP_HP", WM8962_ADDITIONAL_CONTROL_4, 2, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("TEMP_SPK", WM8962_ADDITIONAL_CONTROL_4, 1, 0, NULL, 0),
SND_SOC_DAPM_MIXER("INPGAL", WM8962_LEFT_INPUT_PGA_CONTROL, 4, 0,
inpgal, ARRAY_SIZE(inpgal)),
SND_SOC_DAPM_MIXER("INPGAR", WM8962_RIGHT_INPUT_PGA_CONTROL, 4, 0,
inpgar, ARRAY_SIZE(inpgar)),
SND_SOC_DAPM_MIXER("MIXINL", WM8962_PWR_MGMT_1, 5, 0,
mixinl, ARRAY_SIZE(mixinl)),
SND_SOC_DAPM_MIXER("MIXINR", WM8962_PWR_MGMT_1, 4, 0,
mixinr, ARRAY_SIZE(mixinr)),
SND_SOC_DAPM_AIF_IN("DMIC_ENA", NULL, 0, WM8962_PWR_MGMT_1, 10, 0),
SND_SOC_DAPM_ADC("ADCL", "Capture", WM8962_PWR_MGMT_1, 3, 0),
SND_SOC_DAPM_ADC("ADCR", "Capture", WM8962_PWR_MGMT_1, 2, 0),
SND_SOC_DAPM_MUX("STL", SND_SOC_NOPM, 0, 0, &stl_mux),
SND_SOC_DAPM_MUX("STR", SND_SOC_NOPM, 0, 0, &str_mux),
SND_SOC_DAPM_DAC("DACL", "Playback", WM8962_PWR_MGMT_2, 8, 0),
SND_SOC_DAPM_DAC("DACR", "Playback", WM8962_PWR_MGMT_2, 7, 0),
SND_SOC_DAPM_PGA("Left Bypass", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("Right Bypass", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_MIXER("HPMIXL", WM8962_MIXER_ENABLES, 3, 0,
hpmixl, ARRAY_SIZE(hpmixl)),
SND_SOC_DAPM_MIXER("HPMIXR", WM8962_MIXER_ENABLES, 2, 0,
hpmixr, ARRAY_SIZE(hpmixr)),
SND_SOC_DAPM_MUX_E("HPOUTL PGA", WM8962_PWR_MGMT_2, 6, 0, &hpoutl_mux,
out_pga_event, SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_MUX_E("HPOUTR PGA", WM8962_PWR_MGMT_2, 5, 0, &hpoutr_mux,
out_pga_event, SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_PGA_E("HPOUT", SND_SOC_NOPM, 0, 0, NULL, 0, hp_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_OUTPUT("HPOUTL"),
SND_SOC_DAPM_OUTPUT("HPOUTR"),
};
static const struct snd_soc_dapm_widget wm8962_dapm_spk_mono_widgets[] = {
SND_SOC_DAPM_MIXER("Speaker Mixer", WM8962_MIXER_ENABLES, 1, 0,
spkmixl, ARRAY_SIZE(spkmixl)),
SND_SOC_DAPM_MUX_E("Speaker PGA", WM8962_PWR_MGMT_2, 4, 0, &spkoutl_mux,
out_pga_event, SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_PGA("Speaker Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0),
SND_SOC_DAPM_OUTPUT("SPKOUT"),
};
static const struct snd_soc_dapm_widget wm8962_dapm_spk_stereo_widgets[] = {
SND_SOC_DAPM_MIXER("SPKOUTL Mixer", WM8962_MIXER_ENABLES, 1, 0,
spkmixl, ARRAY_SIZE(spkmixl)),
SND_SOC_DAPM_MIXER("SPKOUTR Mixer", WM8962_MIXER_ENABLES, 0, 0,
spkmixr, ARRAY_SIZE(spkmixr)),
SND_SOC_DAPM_MUX_E("SPKOUTL PGA", WM8962_PWR_MGMT_2, 4, 0, &spkoutl_mux,
out_pga_event, SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_MUX_E("SPKOUTR PGA", WM8962_PWR_MGMT_2, 3, 0, &spkoutr_mux,
out_pga_event, SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_PGA("SPKOUTR Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0),
SND_SOC_DAPM_PGA("SPKOUTL Output", WM8962_CLASS_D_CONTROL_1, 6, 0, NULL, 0),
SND_SOC_DAPM_OUTPUT("SPKOUTL"),
SND_SOC_DAPM_OUTPUT("SPKOUTR"),
};
static const struct snd_soc_dapm_route wm8962_intercon[] = {
{ "INPGAL", "IN1L Switch", "IN1L" },
{ "INPGAL", "IN2L Switch", "IN2L" },
{ "INPGAL", "IN3L Switch", "IN3L" },
{ "INPGAL", "IN4L Switch", "IN4L" },
{ "INPGAR", "IN1R Switch", "IN1R" },
{ "INPGAR", "IN2R Switch", "IN2R" },
{ "INPGAR", "IN3R Switch", "IN3R" },
{ "INPGAR", "IN4R Switch", "IN4R" },
{ "MIXINL", "IN2L Switch", "IN2L" },
{ "MIXINL", "IN3L Switch", "IN3L" },
{ "MIXINL", "PGA Switch", "INPGAL" },
{ "MIXINR", "IN2R Switch", "IN2R" },
{ "MIXINR", "IN3R Switch", "IN3R" },
{ "MIXINR", "PGA Switch", "INPGAR" },
{ "MICBIAS", NULL, "SYSCLK" },
{ "DMIC_ENA", NULL, "DMICDAT" },
{ "ADCL", NULL, "SYSCLK" },
{ "ADCL", NULL, "TOCLK" },
{ "ADCL", NULL, "MIXINL" },
{ "ADCL", NULL, "DMIC_ENA" },
{ "ADCL", NULL, "DSP2" },
{ "ADCR", NULL, "SYSCLK" },
{ "ADCR", NULL, "TOCLK" },
{ "ADCR", NULL, "MIXINR" },
{ "ADCR", NULL, "DMIC_ENA" },
{ "ADCR", NULL, "DSP2" },
{ "STL", "Left", "ADCL" },
{ "STL", "Right", "ADCR" },
{ "STR", "Left", "ADCL" },
{ "STR", "Right", "ADCR" },
{ "DACL", NULL, "SYSCLK" },
{ "DACL", NULL, "TOCLK" },
{ "DACL", NULL, "Beep" },
{ "DACL", NULL, "STL" },
{ "DACL", NULL, "DSP2" },
{ "DACR", NULL, "SYSCLK" },
{ "DACR", NULL, "TOCLK" },
{ "DACR", NULL, "Beep" },
{ "DACR", NULL, "STR" },
{ "DACR", NULL, "DSP2" },
{ "HPMIXL", "IN4L Switch", "IN4L" },
{ "HPMIXL", "IN4R Switch", "IN4R" },
{ "HPMIXL", "DACL Switch", "DACL" },
{ "HPMIXL", "DACR Switch", "DACR" },
{ "HPMIXL", "MIXINL Switch", "MIXINL" },
{ "HPMIXL", "MIXINR Switch", "MIXINR" },
{ "HPMIXR", "IN4L Switch", "IN4L" },
{ "HPMIXR", "IN4R Switch", "IN4R" },
{ "HPMIXR", "DACL Switch", "DACL" },
{ "HPMIXR", "DACR Switch", "DACR" },
{ "HPMIXR", "MIXINL Switch", "MIXINL" },
{ "HPMIXR", "MIXINR Switch", "MIXINR" },
{ "Left Bypass", NULL, "HPMIXL" },
{ "Left Bypass", NULL, "Class G" },
{ "Right Bypass", NULL, "HPMIXR" },
{ "Right Bypass", NULL, "Class G" },
{ "HPOUTL PGA", "Mixer", "Left Bypass" },
{ "HPOUTL PGA", "DAC", "DACL" },
{ "HPOUTR PGA", "Mixer", "Right Bypass" },
{ "HPOUTR PGA", "DAC", "DACR" },
{ "HPOUT", NULL, "HPOUTL PGA" },
{ "HPOUT", NULL, "HPOUTR PGA" },
{ "HPOUT", NULL, "Charge Pump" },
{ "HPOUT", NULL, "SYSCLK" },
{ "HPOUT", NULL, "TOCLK" },
{ "HPOUTL", NULL, "HPOUT" },
{ "HPOUTR", NULL, "HPOUT" },
{ "HPOUTL", NULL, "TEMP_HP" },
{ "HPOUTR", NULL, "TEMP_HP" },
};
static const struct snd_soc_dapm_route wm8962_spk_mono_intercon[] = {
{ "Speaker Mixer", "IN4L Switch", "IN4L" },
{ "Speaker Mixer", "IN4R Switch", "IN4R" },
{ "Speaker Mixer", "DACL Switch", "DACL" },
{ "Speaker Mixer", "DACR Switch", "DACR" },
{ "Speaker Mixer", "MIXINL Switch", "MIXINL" },
{ "Speaker Mixer", "MIXINR Switch", "MIXINR" },
{ "Speaker PGA", "Mixer", "Speaker Mixer" },
{ "Speaker PGA", "DAC", "DACL" },
{ "Speaker Output", NULL, "Speaker PGA" },
{ "Speaker Output", NULL, "SYSCLK" },
{ "Speaker Output", NULL, "TOCLK" },
{ "Speaker Output", NULL, "TEMP_SPK" },
{ "SPKOUT", NULL, "Speaker Output" },
};
static const struct snd_soc_dapm_route wm8962_spk_stereo_intercon[] = {
{ "SPKOUTL Mixer", "IN4L Switch", "IN4L" },
{ "SPKOUTL Mixer", "IN4R Switch", "IN4R" },
{ "SPKOUTL Mixer", "DACL Switch", "DACL" },
{ "SPKOUTL Mixer", "DACR Switch", "DACR" },
{ "SPKOUTL Mixer", "MIXINL Switch", "MIXINL" },
{ "SPKOUTL Mixer", "MIXINR Switch", "MIXINR" },
{ "SPKOUTR Mixer", "IN4L Switch", "IN4L" },
{ "SPKOUTR Mixer", "IN4R Switch", "IN4R" },
{ "SPKOUTR Mixer", "DACL Switch", "DACL" },
{ "SPKOUTR Mixer", "DACR Switch", "DACR" },
{ "SPKOUTR Mixer", "MIXINL Switch", "MIXINL" },
{ "SPKOUTR Mixer", "MIXINR Switch", "MIXINR" },
{ "SPKOUTL PGA", "Mixer", "SPKOUTL Mixer" },
{ "SPKOUTL PGA", "DAC", "DACL" },
{ "SPKOUTR PGA", "Mixer", "SPKOUTR Mixer" },
{ "SPKOUTR PGA", "DAC", "DACR" },
{ "SPKOUTL Output", NULL, "SPKOUTL PGA" },
{ "SPKOUTL Output", NULL, "SYSCLK" },
{ "SPKOUTL Output", NULL, "TOCLK" },
{ "SPKOUTL Output", NULL, "TEMP_SPK" },
{ "SPKOUTR Output", NULL, "SPKOUTR PGA" },
{ "SPKOUTR Output", NULL, "SYSCLK" },
{ "SPKOUTR Output", NULL, "TOCLK" },
{ "SPKOUTR Output", NULL, "TEMP_SPK" },
{ "SPKOUTL", NULL, "SPKOUTL Output" },
{ "SPKOUTR", NULL, "SPKOUTR Output" },
};
static int wm8962_add_widgets(struct snd_soc_codec *codec)
{
struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
struct snd_soc_dapm_context *dapm = &codec->dapm;
snd_soc_add_codec_controls(codec, wm8962_snd_controls,
ARRAY_SIZE(wm8962_snd_controls));
if (pdata && pdata->spk_mono)
snd_soc_add_codec_controls(codec, wm8962_spk_mono_controls,
ARRAY_SIZE(wm8962_spk_mono_controls));
else
snd_soc_add_codec_controls(codec, wm8962_spk_stereo_controls,
ARRAY_SIZE(wm8962_spk_stereo_controls));
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
snd_soc_dapm_new_controls(dapm, wm8962_dapm_widgets,
ARRAY_SIZE(wm8962_dapm_widgets));
if (pdata && pdata->spk_mono)
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
snd_soc_dapm_new_controls(dapm, wm8962_dapm_spk_mono_widgets,
ARRAY_SIZE(wm8962_dapm_spk_mono_widgets));
else
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
snd_soc_dapm_new_controls(dapm, wm8962_dapm_spk_stereo_widgets,
ARRAY_SIZE(wm8962_dapm_spk_stereo_widgets));
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
snd_soc_dapm_add_routes(dapm, wm8962_intercon,
ARRAY_SIZE(wm8962_intercon));
if (pdata && pdata->spk_mono)
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
snd_soc_dapm_add_routes(dapm, wm8962_spk_mono_intercon,
ARRAY_SIZE(wm8962_spk_mono_intercon));
else
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
snd_soc_dapm_add_routes(dapm, wm8962_spk_stereo_intercon,
ARRAY_SIZE(wm8962_spk_stereo_intercon));
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
snd_soc_dapm_disable_pin(dapm, "Beep");
return 0;
}
/* -1 for reserved values */
static const int bclk_divs[] = {
1, -1, 2, 3, 4, -1, 6, 8, -1, 12, 16, 24, -1, 32, 32, 32
};
static const int sysclk_rates[] = {
64, 128, 192, 256, 384, 512, 768, 1024, 1408, 1536, 3072, 6144
};
static void wm8962_configure_bclk(struct snd_soc_codec *codec)
{
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
int dspclk, i;
int clocking2 = 0;
int clocking4 = 0;
int aif2 = 0;
if (!wm8962->sysclk_rate) {
dev_dbg(codec->dev, "No SYSCLK configured\n");
return;
}
if (!wm8962->bclk || !wm8962->lrclk) {
dev_dbg(codec->dev, "No audio clocks configured\n");
return;
}
for (i = 0; i < ARRAY_SIZE(sysclk_rates); i++) {
if (sysclk_rates[i] == wm8962->sysclk_rate / wm8962->lrclk) {
clocking4 |= i << WM8962_SYSCLK_RATE_SHIFT;
break;
}
}
if (i == ARRAY_SIZE(sysclk_rates)) {
dev_err(codec->dev, "Unsupported sysclk ratio %d\n",
wm8962->sysclk_rate / wm8962->lrclk);
return;
}
dev_dbg(codec->dev, "Selected sysclk ratio %d\n", sysclk_rates[i]);
snd_soc_update_bits(codec, WM8962_CLOCKING_4,
WM8962_SYSCLK_RATE_MASK, clocking4);
dspclk = snd_soc_read(codec, WM8962_CLOCKING1);
if (dspclk < 0) {
dev_err(codec->dev, "Failed to read DSPCLK: %d\n", dspclk);
return;
}
dspclk = (dspclk & WM8962_DSPCLK_DIV_MASK) >> WM8962_DSPCLK_DIV_SHIFT;
switch (dspclk) {
case 0:
dspclk = wm8962->sysclk_rate;
break;
case 1:
dspclk = wm8962->sysclk_rate / 2;
break;
case 2:
dspclk = wm8962->sysclk_rate / 4;
break;
default:
dev_warn(codec->dev, "Unknown DSPCLK divisor read back\n");
dspclk = wm8962->sysclk;
}
dev_dbg(codec->dev, "DSPCLK is %dHz, BCLK %d\n", dspclk, wm8962->bclk);
/* We're expecting an exact match */
for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
if (bclk_divs[i] < 0)
continue;
if (dspclk / bclk_divs[i] == wm8962->bclk) {
dev_dbg(codec->dev, "Selected BCLK_DIV %d for %dHz\n",
bclk_divs[i], wm8962->bclk);
clocking2 |= i;
break;
}
}
if (i == ARRAY_SIZE(bclk_divs)) {
dev_err(codec->dev, "Unsupported BCLK ratio %d\n",
dspclk / wm8962->bclk);
return;
}
aif2 |= wm8962->bclk / wm8962->lrclk;
dev_dbg(codec->dev, "Selected LRCLK divisor %d for %dHz\n",
wm8962->bclk / wm8962->lrclk, wm8962->lrclk);
snd_soc_update_bits(codec, WM8962_CLOCKING2,
WM8962_BCLK_DIV_MASK, clocking2);
snd_soc_update_bits(codec, WM8962_AUDIO_INTERFACE_2,
WM8962_AIF_RATE_MASK, aif2);
}
static int wm8962_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
if (level == codec->dapm.bias_level)
return 0;
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
/* VMID 2*50k */
snd_soc_update_bits(codec, WM8962_PWR_MGMT_1,
WM8962_VMID_SEL_MASK, 0x80);
wm8962_configure_bclk(codec);
break;
case SND_SOC_BIAS_STANDBY:
/* VMID 2*250k */
snd_soc_update_bits(codec, WM8962_PWR_MGMT_1,
WM8962_VMID_SEL_MASK, 0x100);
break;
case SND_SOC_BIAS_OFF:
break;
}
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
codec->dapm.bias_level = level;
return 0;
}
static const struct {
int rate;
int reg;
} sr_vals[] = {
{ 48000, 0 },
{ 44100, 0 },
{ 32000, 1 },
{ 22050, 2 },
{ 24000, 2 },
{ 16000, 3 },
{ 11025, 4 },
{ 12000, 4 },
{ 8000, 5 },
{ 88200, 6 },
{ 96000, 6 },
};
static int wm8962_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
int i;
int aif0 = 0;
int adctl3 = 0;
wm8962->bclk = snd_soc_params_to_bclk(params);
if (params_channels(params) == 1)
wm8962->bclk *= 2;
wm8962->lrclk = params_rate(params);
for (i = 0; i < ARRAY_SIZE(sr_vals); i++) {
if (sr_vals[i].rate == wm8962->lrclk) {
adctl3 |= sr_vals[i].reg;
break;
}
}
if (i == ARRAY_SIZE(sr_vals)) {
dev_err(codec->dev, "Unsupported rate %dHz\n", wm8962->lrclk);
return -EINVAL;
}
if (wm8962->lrclk % 8000 == 0)
adctl3 |= WM8962_SAMPLE_RATE_INT_MODE;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
break;
case SNDRV_PCM_FORMAT_S20_3LE:
aif0 |= 0x4;
break;
case SNDRV_PCM_FORMAT_S24_LE:
aif0 |= 0x8;
break;
case SNDRV_PCM_FORMAT_S32_LE:
aif0 |= 0xc;
break;
default:
return -EINVAL;
}
snd_soc_update_bits(codec, WM8962_AUDIO_INTERFACE_0,
WM8962_WL_MASK, aif0);
snd_soc_update_bits(codec, WM8962_ADDITIONAL_CONTROL_3,
WM8962_SAMPLE_RATE_INT_MODE |
WM8962_SAMPLE_RATE_MASK, adctl3);
if (codec->dapm.bias_level == SND_SOC_BIAS_ON)
wm8962_configure_bclk(codec);
return 0;
}
static int wm8962_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned int freq, int dir)
{
struct snd_soc_codec *codec = dai->codec;
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
int src;
switch (clk_id) {
case WM8962_SYSCLK_MCLK:
wm8962->sysclk = WM8962_SYSCLK_MCLK;
src = 0;
break;
case WM8962_SYSCLK_FLL:
wm8962->sysclk = WM8962_SYSCLK_FLL;
src = 1 << WM8962_SYSCLK_SRC_SHIFT;
break;
default:
return -EINVAL;
}
snd_soc_update_bits(codec, WM8962_CLOCKING2, WM8962_SYSCLK_SRC_MASK,
src);
wm8962->sysclk_rate = freq;
wm8962_configure_bclk(codec);
return 0;
}
static int wm8962_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{
struct snd_soc_codec *codec = dai->codec;
int aif0 = 0;
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_DSP_B:
aif0 |= WM8962_LRCLK_INV | 3;
case SND_SOC_DAIFMT_DSP_A:
aif0 |= 3;
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
case SND_SOC_DAIFMT_IB_NF:
break;
default:
return -EINVAL;
}
break;
case SND_SOC_DAIFMT_RIGHT_J:
break;
case SND_SOC_DAIFMT_LEFT_J:
aif0 |= 1;
break;
case SND_SOC_DAIFMT_I2S:
aif0 |= 2;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_IB_NF:
aif0 |= WM8962_BCLK_INV;
break;
case SND_SOC_DAIFMT_NB_IF:
aif0 |= WM8962_LRCLK_INV;
break;
case SND_SOC_DAIFMT_IB_IF:
aif0 |= WM8962_BCLK_INV | WM8962_LRCLK_INV;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
aif0 |= WM8962_MSTR;
break;
case SND_SOC_DAIFMT_CBS_CFS:
break;
default:
return -EINVAL;
}
snd_soc_update_bits(codec, WM8962_AUDIO_INTERFACE_0,
WM8962_FMT_MASK | WM8962_BCLK_INV | WM8962_MSTR |
WM8962_LRCLK_INV, aif0);
return 0;
}
struct _fll_div {
u16 fll_fratio;
u16 fll_outdiv;
u16 fll_refclk_div;
u16 n;
u16 theta;
u16 lambda;
};
/* The size in bits of the FLL divide multiplied by 10
* to allow rounding later */
#define FIXED_FLL_SIZE ((1 << 16) * 10)
static struct {
unsigned int min;
unsigned int max;
u16 fll_fratio;
int ratio;
} fll_fratios[] = {
{ 0, 64000, 4, 16 },
{ 64000, 128000, 3, 8 },
{ 128000, 256000, 2, 4 },
{ 256000, 1000000, 1, 2 },
{ 1000000, 13500000, 0, 1 },
};
static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
unsigned int Fout)
{
unsigned int target;
unsigned int div;
unsigned int fratio, gcd_fll;
int i;
/* Fref must be <=13.5MHz */
div = 1;
fll_div->fll_refclk_div = 0;
while ((Fref / div) > 13500000) {
div *= 2;
fll_div->fll_refclk_div++;
if (div > 4) {
pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
Fref);
return -EINVAL;
}
}
pr_debug("FLL Fref=%u Fout=%u\n", Fref, Fout);
/* Apply the division for our remaining calculations */
Fref /= div;
/* Fvco should be 90-100MHz; don't check the upper bound */
div = 2;
while (Fout * div < 90000000) {
div++;
if (div > 64) {
pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
Fout);
return -EINVAL;
}
}
target = Fout * div;
fll_div->fll_outdiv = div - 1;
pr_debug("FLL Fvco=%dHz\n", target);
/* Find an appropriate FLL_FRATIO and factor it out of the target */
for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
fll_div->fll_fratio = fll_fratios[i].fll_fratio;
fratio = fll_fratios[i].ratio;
break;
}
}
if (i == ARRAY_SIZE(fll_fratios)) {
pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
return -EINVAL;
}
fll_div->n = target / (fratio * Fref);
if (target % Fref == 0) {
fll_div->theta = 0;
fll_div->lambda = 0;
} else {
gcd_fll = gcd(target, fratio * Fref);
fll_div->theta = (target - (fll_div->n * fratio * Fref))
/ gcd_fll;
fll_div->lambda = (fratio * Fref) / gcd_fll;
}
pr_debug("FLL N=%x THETA=%x LAMBDA=%x\n",
fll_div->n, fll_div->theta, fll_div->lambda);
pr_debug("FLL_FRATIO=%x FLL_OUTDIV=%x FLL_REFCLK_DIV=%x\n",
fll_div->fll_fratio, fll_div->fll_outdiv,
fll_div->fll_refclk_div);
return 0;
}
static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
unsigned int Fref, unsigned int Fout)
{
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
struct _fll_div fll_div;
unsigned long timeout;
int ret;
int fll1 = 0;
/* Any change? */
if (source == wm8962->fll_src && Fref == wm8962->fll_fref &&
Fout == wm8962->fll_fout)
return 0;
if (Fout == 0) {
dev_dbg(codec->dev, "FLL disabled\n");
wm8962->fll_fref = 0;
wm8962->fll_fout = 0;
snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1,
WM8962_FLL_ENA, 0);
pm_runtime_put(codec->dev);
return 0;
}
ret = fll_factors(&fll_div, Fref, Fout);
if (ret != 0)
return ret;
/* Parameters good, disable so we can reprogram */
snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1, WM8962_FLL_ENA, 0);
switch (fll_id) {
case WM8962_FLL_MCLK:
case WM8962_FLL_BCLK:
case WM8962_FLL_OSC:
fll1 |= (fll_id - 1) << WM8962_FLL_REFCLK_SRC_SHIFT;
break;
case WM8962_FLL_INT:
snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1,
WM8962_FLL_OSC_ENA, WM8962_FLL_OSC_ENA);
snd_soc_update_bits(codec, WM8962_FLL_CONTROL_5,
WM8962_FLL_FRC_NCO, WM8962_FLL_FRC_NCO);
break;
default:
dev_err(codec->dev, "Unknown FLL source %d\n", ret);
return -EINVAL;
}
if (fll_div.theta || fll_div.lambda)
fll1 |= WM8962_FLL_FRAC;
/* Stop the FLL while we reconfigure */
snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1, WM8962_FLL_ENA, 0);
snd_soc_update_bits(codec, WM8962_FLL_CONTROL_2,
WM8962_FLL_OUTDIV_MASK |
WM8962_FLL_REFCLK_DIV_MASK,
(fll_div.fll_outdiv << WM8962_FLL_OUTDIV_SHIFT) |
(fll_div.fll_refclk_div));
snd_soc_update_bits(codec, WM8962_FLL_CONTROL_3,
WM8962_FLL_FRATIO_MASK, fll_div.fll_fratio);
snd_soc_write(codec, WM8962_FLL_CONTROL_6, fll_div.theta);
snd_soc_write(codec, WM8962_FLL_CONTROL_7, fll_div.lambda);
snd_soc_write(codec, WM8962_FLL_CONTROL_8, fll_div.n);
try_wait_for_completion(&wm8962->fll_lock);
pm_runtime_get_sync(codec->dev);
snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1,
WM8962_FLL_FRAC | WM8962_FLL_REFCLK_SRC_MASK |
WM8962_FLL_ENA, fll1 | WM8962_FLL_ENA);
dev_dbg(codec->dev, "FLL configured for %dHz->%dHz\n", Fref, Fout);
ret = 0;
if (fll1 & WM8962_FLL_ENA) {
/* This should be a massive overestimate but go even
* higher if we'll error out
*/
if (wm8962->irq)
timeout = msecs_to_jiffies(5);
else
timeout = msecs_to_jiffies(1);
timeout = wait_for_completion_timeout(&wm8962->fll_lock,
timeout);
if (timeout == 0 && wm8962->irq) {
dev_err(codec->dev, "FLL lock timed out");
ret = -ETIMEDOUT;
}
}
wm8962->fll_fref = Fref;
wm8962->fll_fout = Fout;
wm8962->fll_src = source;
return ret;
}
static int wm8962_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
int val;
if (mute)
val = WM8962_DAC_MUTE;
else
val = 0;
return snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1,
WM8962_DAC_MUTE, val);
}
#define WM8962_RATES SNDRV_PCM_RATE_8000_96000
#define WM8962_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
static const struct snd_soc_dai_ops wm8962_dai_ops = {
.hw_params = wm8962_hw_params,
.set_sysclk = wm8962_set_dai_sysclk,
.set_fmt = wm8962_set_dai_fmt,
.digital_mute = wm8962_mute,
};
static struct snd_soc_dai_driver wm8962_dai = {
.name = "wm8962",
.playback = {
.stream_name = "Playback",
.channels_min = 1,
.channels_max = 2,
.rates = WM8962_RATES,
.formats = WM8962_FORMATS,
},
.capture = {
.stream_name = "Capture",
.channels_min = 1,
.channels_max = 2,
.rates = WM8962_RATES,
.formats = WM8962_FORMATS,
},
.ops = &wm8962_dai_ops,
.symmetric_rates = 1,
};
static void wm8962_mic_work(struct work_struct *work)
{
struct wm8962_priv *wm8962 = container_of(work,
struct wm8962_priv,
mic_work.work);
struct snd_soc_codec *codec = wm8962->codec;
int status = 0;
int irq_pol = 0;
int reg;
reg = snd_soc_read(codec, WM8962_ADDITIONAL_CONTROL_4);
if (reg & WM8962_MICDET_STS) {
status |= SND_JACK_MICROPHONE;
irq_pol |= WM8962_MICD_IRQ_POL;
}
if (reg & WM8962_MICSHORT_STS) {
status |= SND_JACK_BTN_0;
irq_pol |= WM8962_MICSCD_IRQ_POL;
}
snd_soc_jack_report(wm8962->jack, status,
SND_JACK_MICROPHONE | SND_JACK_BTN_0);
snd_soc_update_bits(codec, WM8962_MICINT_SOURCE_POL,
WM8962_MICSCD_IRQ_POL |
WM8962_MICD_IRQ_POL, irq_pol);
}
static irqreturn_t wm8962_irq(int irq, void *data)
{
struct snd_soc_codec *codec = data;
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
int mask;
int active;
int reg;
mask = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2_MASK);
active = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2);
active &= ~mask;
if (!active)
return IRQ_NONE;
/* Acknowledge the interrupts */
snd_soc_write(codec, WM8962_INTERRUPT_STATUS_2, active);
if (active & WM8962_FLL_LOCK_EINT) {
dev_dbg(codec->dev, "FLL locked\n");
complete(&wm8962->fll_lock);
}
if (active & WM8962_FIFOS_ERR_EINT)
dev_err(codec->dev, "FIFO error\n");
if (active & WM8962_TEMP_SHUT_EINT) {
dev_crit(codec->dev, "Thermal shutdown\n");
reg = snd_soc_read(codec, WM8962_THERMAL_SHUTDOWN_STATUS);
if (reg & WM8962_TEMP_ERR_HP)
dev_crit(codec->dev, "Headphone thermal error\n");
if (reg & WM8962_TEMP_WARN_HP)
dev_crit(codec->dev, "Headphone thermal warning\n");
if (reg & WM8962_TEMP_ERR_SPK)
dev_crit(codec->dev, "Speaker thermal error\n");
if (reg & WM8962_TEMP_WARN_SPK)
dev_crit(codec->dev, "Speaker thermal warning\n");
}
if (active & (WM8962_MICSCD_EINT | WM8962_MICD_EINT)) {
dev_dbg(codec->dev, "Microphone event detected\n");
#ifndef CONFIG_SND_SOC_WM8962_MODULE
trace_snd_soc_jack_irq(dev_name(codec->dev));
#endif
pm_wakeup_event(codec->dev, 300);
schedule_delayed_work(&wm8962->mic_work,
msecs_to_jiffies(250));
}
return IRQ_HANDLED;
}
/**
* wm8962_mic_detect - Enable microphone detection via the WM8962 IRQ
*
* @codec: WM8962 codec
* @jack: jack to report detection events on
*
* Enable microphone detection via IRQ on the WM8962. If GPIOs are
* being used to bring out signals to the processor then only platform
* data configuration is needed for WM8962 and processor GPIOs should
* be configured using snd_soc_jack_add_gpios() instead.
*
* If no jack is supplied detection will be disabled.
*/
int wm8962_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack)
{
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
int irq_mask, enable;
wm8962->jack = jack;
if (jack) {
irq_mask = 0;
enable = WM8962_MICDET_ENA;
} else {
irq_mask = WM8962_MICD_EINT | WM8962_MICSCD_EINT;
enable = 0;
}
snd_soc_update_bits(codec, WM8962_INTERRUPT_STATUS_2_MASK,
WM8962_MICD_EINT | WM8962_MICSCD_EINT, irq_mask);
snd_soc_update_bits(codec, WM8962_ADDITIONAL_CONTROL_4,
WM8962_MICDET_ENA, enable);
/* Send an initial empty report */
snd_soc_jack_report(wm8962->jack, 0,
SND_JACK_MICROPHONE | SND_JACK_BTN_0);
if (jack) {
snd_soc_dapm_force_enable_pin(&codec->dapm, "SYSCLK");
snd_soc_dapm_force_enable_pin(&codec->dapm, "MICBIAS");
} else {
snd_soc_dapm_disable_pin(&codec->dapm, "SYSCLK");
snd_soc_dapm_disable_pin(&codec->dapm, "MICBIAS");
}
return 0;
}
EXPORT_SYMBOL_GPL(wm8962_mic_detect);
#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
static int beep_rates[] = {
500, 1000, 2000, 4000,
};
static void wm8962_beep_work(struct work_struct *work)
{
struct wm8962_priv *wm8962 =
container_of(work, struct wm8962_priv, beep_work);
struct snd_soc_codec *codec = wm8962->codec;
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
struct snd_soc_dapm_context *dapm = &codec->dapm;
int i;
int reg = 0;
int best = 0;
if (wm8962->beep_rate) {
for (i = 0; i < ARRAY_SIZE(beep_rates); i++) {
if (abs(wm8962->beep_rate - beep_rates[i]) <
abs(wm8962->beep_rate - beep_rates[best]))
best = i;
}
dev_dbg(codec->dev, "Set beep rate %dHz for requested %dHz\n",
beep_rates[best], wm8962->beep_rate);
reg = WM8962_BEEP_ENA | (best << WM8962_BEEP_RATE_SHIFT);
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
snd_soc_dapm_enable_pin(dapm, "Beep");
} else {
dev_dbg(codec->dev, "Disabling beep\n");
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
snd_soc_dapm_disable_pin(dapm, "Beep");
}
snd_soc_update_bits(codec, WM8962_BEEP_GENERATOR_1,
WM8962_BEEP_ENA | WM8962_BEEP_RATE_MASK, reg);
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
snd_soc_dapm_sync(dapm);
}
/* For usability define a way of injecting beep events for the device -
* many systems will not have a keyboard.
*/
static int wm8962_beep_event(struct input_dev *dev, unsigned int type,
unsigned int code, int hz)
{
struct snd_soc_codec *codec = input_get_drvdata(dev);
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
dev_dbg(codec->dev, "Beep event %x %x\n", code, hz);
switch (code) {
case SND_BELL:
if (hz)
hz = 1000;
case SND_TONE:
break;
default:
return -1;
}
/* Kick the beep from a workqueue */
wm8962->beep_rate = hz;
schedule_work(&wm8962->beep_work);
return 0;
}
static ssize_t wm8962_beep_set(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct wm8962_priv *wm8962 = dev_get_drvdata(dev);
long int time;
int ret;
ret = strict_strtol(buf, 10, &time);
if (ret != 0)
return ret;
input_event(wm8962->beep, EV_SND, SND_TONE, time);
return count;
}
static DEVICE_ATTR(beep, 0200, NULL, wm8962_beep_set);
static void wm8962_init_beep(struct snd_soc_codec *codec)
{
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
int ret;
wm8962->beep = input_allocate_device();
if (!wm8962->beep) {
dev_err(codec->dev, "Failed to allocate beep device\n");
return;
}
INIT_WORK(&wm8962->beep_work, wm8962_beep_work);
wm8962->beep_rate = 0;
wm8962->beep->name = "WM8962 Beep Generator";
wm8962->beep->phys = dev_name(codec->dev);
wm8962->beep->id.bustype = BUS_I2C;
wm8962->beep->evbit[0] = BIT_MASK(EV_SND);
wm8962->beep->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
wm8962->beep->event = wm8962_beep_event;
wm8962->beep->dev.parent = codec->dev;
input_set_drvdata(wm8962->beep, codec);
ret = input_register_device(wm8962->beep);
if (ret != 0) {
input_free_device(wm8962->beep);
wm8962->beep = NULL;
dev_err(codec->dev, "Failed to register beep device\n");
}
ret = device_create_file(codec->dev, &dev_attr_beep);
if (ret != 0) {
dev_err(codec->dev, "Failed to create keyclick file: %d\n",
ret);
}
}
static void wm8962_free_beep(struct snd_soc_codec *codec)
{
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
device_remove_file(codec->dev, &dev_attr_beep);
input_unregister_device(wm8962->beep);
cancel_work_sync(&wm8962->beep_work);
wm8962->beep = NULL;
snd_soc_update_bits(codec, WM8962_BEEP_GENERATOR_1, WM8962_BEEP_ENA,0);
}
#else
static void wm8962_init_beep(struct snd_soc_codec *codec)
{
}
static void wm8962_free_beep(struct snd_soc_codec *codec)
{
}
#endif
static void wm8962_set_gpio_mode(struct snd_soc_codec *codec, int gpio)
{
int mask = 0;
int val = 0;
/* Some of the GPIOs are behind MFP configuration and need to
* be put into GPIO mode. */
switch (gpio) {
case 2:
mask = WM8962_CLKOUT2_SEL_MASK;
val = 1 << WM8962_CLKOUT2_SEL_SHIFT;
break;
case 3:
mask = WM8962_CLKOUT3_SEL_MASK;
val = 1 << WM8962_CLKOUT3_SEL_SHIFT;
break;
default:
break;
}
if (mask)
snd_soc_update_bits(codec, WM8962_ANALOGUE_CLOCKING1,
mask, val);
}
#ifdef CONFIG_GPIOLIB
static inline struct wm8962_priv *gpio_to_wm8962(struct gpio_chip *chip)
{
return container_of(chip, struct wm8962_priv, gpio_chip);
}
static int wm8962_gpio_request(struct gpio_chip *chip, unsigned offset)
{
struct wm8962_priv *wm8962 = gpio_to_wm8962(chip);
struct snd_soc_codec *codec = wm8962->codec;
/* The WM8962 GPIOs aren't linearly numbered. For simplicity
* we export linear numbers and error out if the unsupported
* ones are requsted.
*/
switch (offset + 1) {
case 2:
case 3:
case 5:
case 6:
break;
default:
return -EINVAL;
}
wm8962_set_gpio_mode(codec, offset + 1);
return 0;
}
static void wm8962_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct wm8962_priv *wm8962 = gpio_to_wm8962(chip);
struct snd_soc_codec *codec = wm8962->codec;
snd_soc_update_bits(codec, WM8962_GPIO_BASE + offset,
WM8962_GP2_LVL, !!value << WM8962_GP2_LVL_SHIFT);
}
static int wm8962_gpio_direction_out(struct gpio_chip *chip,
unsigned offset, int value)
{
struct wm8962_priv *wm8962 = gpio_to_wm8962(chip);
struct snd_soc_codec *codec = wm8962->codec;
int ret, val;
/* Force function 1 (logic output) */
val = (1 << WM8962_GP2_FN_SHIFT) | (value << WM8962_GP2_LVL_SHIFT);
ret = snd_soc_update_bits(codec, WM8962_GPIO_BASE + offset,
WM8962_GP2_FN_MASK | WM8962_GP2_LVL, val);
if (ret < 0)
return ret;
return 0;
}
static struct gpio_chip wm8962_template_chip = {
.label = "wm8962",
.owner = THIS_MODULE,
.request = wm8962_gpio_request,
.direction_output = wm8962_gpio_direction_out,
.set = wm8962_gpio_set,
.can_sleep = 1,
};
static void wm8962_init_gpio(struct snd_soc_codec *codec)
{
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
int ret;
wm8962->gpio_chip = wm8962_template_chip;
wm8962->gpio_chip.ngpio = WM8962_MAX_GPIO;
wm8962->gpio_chip.dev = codec->dev;
if (pdata && pdata->gpio_base)
wm8962->gpio_chip.base = pdata->gpio_base;
else
wm8962->gpio_chip.base = -1;
ret = gpiochip_add(&wm8962->gpio_chip);
if (ret != 0)
dev_err(codec->dev, "Failed to add GPIOs: %d\n", ret);
}
static void wm8962_free_gpio(struct snd_soc_codec *codec)
{
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
int ret;
ret = gpiochip_remove(&wm8962->gpio_chip);
if (ret != 0)
dev_err(codec->dev, "Failed to remove GPIOs: %d\n", ret);
}
#else
static void wm8962_init_gpio(struct snd_soc_codec *codec)
{
}
static void wm8962_free_gpio(struct snd_soc_codec *codec)
{
}
#endif
static int wm8962_probe(struct snd_soc_codec *codec)
{
int ret;
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
u16 *reg_cache = codec->reg_cache;
int i, trigger, irq_pol;
bool dmicclk, dmicdat;
wm8962->codec = codec;
codec->control_data = wm8962->regmap;
ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_REGMAP);
if (ret != 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
return ret;
}
wm8962->disable_nb[0].notifier_call = wm8962_regulator_event_0;
wm8962->disable_nb[1].notifier_call = wm8962_regulator_event_1;
wm8962->disable_nb[2].notifier_call = wm8962_regulator_event_2;
wm8962->disable_nb[3].notifier_call = wm8962_regulator_event_3;
wm8962->disable_nb[4].notifier_call = wm8962_regulator_event_4;
wm8962->disable_nb[5].notifier_call = wm8962_regulator_event_5;
wm8962->disable_nb[6].notifier_call = wm8962_regulator_event_6;
wm8962->disable_nb[7].notifier_call = wm8962_regulator_event_7;
/* This should really be moved into the regulator core */
for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++) {
ret = regulator_register_notifier(wm8962->supplies[i].consumer,
&wm8962->disable_nb[i]);
if (ret != 0) {
dev_err(codec->dev,
"Failed to register regulator notifier: %d\n",
ret);
}
}
/* SYSCLK defaults to on; make sure it is off so we can safely
* write to registers if the device is declocked.
*/
snd_soc_update_bits(codec, WM8962_CLOCKING2, WM8962_SYSCLK_ENA, 0);
/* Ensure we have soft control over all registers */
snd_soc_update_bits(codec, WM8962_CLOCKING2,
WM8962_CLKREG_OVD, WM8962_CLKREG_OVD);
/* Ensure that the oscillator and PLLs are disabled */
snd_soc_update_bits(codec, WM8962_PLL2,
WM8962_OSC_ENA | WM8962_PLL2_ENA | WM8962_PLL3_ENA,
0);
if (pdata) {
/* Apply static configuration for GPIOs */
for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++)
if (pdata->gpio_init[i]) {
wm8962_set_gpio_mode(codec, i + 1);
snd_soc_write(codec, 0x200 + i,
pdata->gpio_init[i] & 0xffff);
}
/* Put the speakers into mono mode? */
if (pdata->spk_mono)
reg_cache[WM8962_CLASS_D_CONTROL_2]
|= WM8962_SPK_MONO;
/* Micbias setup, detection enable and detection
* threasholds. */
if (pdata->mic_cfg)
snd_soc_update_bits(codec, WM8962_ADDITIONAL_CONTROL_4,
WM8962_MICDET_ENA |
WM8962_MICDET_THR_MASK |
WM8962_MICSHORT_THR_MASK |
WM8962_MICBIAS_LVL,
pdata->mic_cfg);
}
/* Latch volume update bits */
snd_soc_update_bits(codec, WM8962_LEFT_INPUT_VOLUME,
WM8962_IN_VU, WM8962_IN_VU);
snd_soc_update_bits(codec, WM8962_RIGHT_INPUT_VOLUME,
WM8962_IN_VU, WM8962_IN_VU);
snd_soc_update_bits(codec, WM8962_LEFT_ADC_VOLUME,
WM8962_ADC_VU, WM8962_ADC_VU);
snd_soc_update_bits(codec, WM8962_RIGHT_ADC_VOLUME,
WM8962_ADC_VU, WM8962_ADC_VU);
snd_soc_update_bits(codec, WM8962_LEFT_DAC_VOLUME,
WM8962_DAC_VU, WM8962_DAC_VU);
snd_soc_update_bits(codec, WM8962_RIGHT_DAC_VOLUME,
WM8962_DAC_VU, WM8962_DAC_VU);
snd_soc_update_bits(codec, WM8962_SPKOUTL_VOLUME,
WM8962_SPKOUT_VU, WM8962_SPKOUT_VU);
snd_soc_update_bits(codec, WM8962_SPKOUTR_VOLUME,
WM8962_SPKOUT_VU, WM8962_SPKOUT_VU);
snd_soc_update_bits(codec, WM8962_HPOUTL_VOLUME,
WM8962_HPOUT_VU, WM8962_HPOUT_VU);
snd_soc_update_bits(codec, WM8962_HPOUTR_VOLUME,
WM8962_HPOUT_VU, WM8962_HPOUT_VU);
/* Stereo control for EQ */
snd_soc_update_bits(codec, WM8962_EQ1, WM8962_EQ_SHARED_COEFF, 0);
/* Don't debouce interrupts so we don't need SYSCLK */
snd_soc_update_bits(codec, WM8962_IRQ_DEBOUNCE,
WM8962_FLL_LOCK_DB | WM8962_PLL3_LOCK_DB |
WM8962_PLL2_LOCK_DB | WM8962_TEMP_SHUT_DB,
0);
wm8962_add_widgets(codec);
/* Save boards having to disable DMIC when not in use */
dmicclk = false;
dmicdat = false;
for (i = 0; i < WM8962_MAX_GPIO; i++) {
switch (snd_soc_read(codec, WM8962_GPIO_BASE + i)
& WM8962_GP2_FN_MASK) {
case WM8962_GPIO_FN_DMICCLK:
dmicclk = true;
break;
case WM8962_GPIO_FN_DMICDAT:
dmicdat = true;
break;
default:
break;
}
}
if (!dmicclk || !dmicdat) {
dev_dbg(codec->dev, "DMIC not in use, disabling\n");
snd_soc_dapm_nc_pin(&codec->dapm, "DMICDAT");
}
if (dmicclk != dmicdat)
dev_warn(codec->dev, "DMIC GPIOs partially configured\n");
wm8962_init_beep(codec);
wm8962_init_gpio(codec);
if (wm8962->irq) {
if (pdata && pdata->irq_active_low) {
trigger = IRQF_TRIGGER_LOW;
irq_pol = WM8962_IRQ_POL;
} else {
trigger = IRQF_TRIGGER_HIGH;
irq_pol = 0;
}
snd_soc_update_bits(codec, WM8962_INTERRUPT_CONTROL,
WM8962_IRQ_POL, irq_pol);
ret = request_threaded_irq(wm8962->irq, NULL, wm8962_irq,
trigger | IRQF_ONESHOT,
"wm8962", codec);
if (ret != 0) {
dev_err(codec->dev, "Failed to request IRQ %d: %d\n",
wm8962->irq, ret);
wm8962->irq = 0;
/* Non-fatal */
} else {
/* Enable some IRQs by default */
snd_soc_update_bits(codec,
WM8962_INTERRUPT_STATUS_2_MASK,
WM8962_FLL_LOCK_EINT |
WM8962_TEMP_SHUT_EINT |
WM8962_FIFOS_ERR_EINT, 0);
}
}
return 0;
}
static int wm8962_remove(struct snd_soc_codec *codec)
{
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
int i;
if (wm8962->irq)
free_irq(wm8962->irq, codec);
cancel_delayed_work_sync(&wm8962->mic_work);
wm8962_free_gpio(codec);
wm8962_free_beep(codec);
for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++)
regulator_unregister_notifier(wm8962->supplies[i].consumer,
&wm8962->disable_nb[i]);
return 0;
}
static struct snd_soc_codec_driver soc_codec_dev_wm8962 = {
.probe = wm8962_probe,
.remove = wm8962_remove,
.set_bias_level = wm8962_set_bias_level,
.set_pll = wm8962_set_fll,
.idle_bias_off = true,
};
/* Improve power consumption for IN4 DC measurement mode */
static const struct reg_default wm8962_dc_measure[] = {
{ 0xfd, 0x1 },
{ 0xcc, 0x40 },
{ 0xfd, 0 },
};
static const struct regmap_config wm8962_regmap = {
.reg_bits = 16,
.val_bits = 16,
.max_register = WM8962_MAX_REGISTER,
.reg_defaults = wm8962_reg,
.num_reg_defaults = ARRAY_SIZE(wm8962_reg),
.volatile_reg = wm8962_volatile_register,
.readable_reg = wm8962_readable_register,
.cache_type = REGCACHE_RBTREE,
};
static __devinit int wm8962_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8962_pdata *pdata = dev_get_platdata(&i2c->dev);
struct wm8962_priv *wm8962;
unsigned int reg;
int ret, i;
wm8962 = devm_kzalloc(&i2c->dev, sizeof(struct wm8962_priv),
GFP_KERNEL);
if (wm8962 == NULL)
return -ENOMEM;
i2c_set_clientdata(i2c, wm8962);
INIT_DELAYED_WORK(&wm8962->mic_work, wm8962_mic_work);
init_completion(&wm8962->fll_lock);
wm8962->irq = i2c->irq;
for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++)
wm8962->supplies[i].supply = wm8962_supply_names[i];
ret = regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8962->supplies),
wm8962->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
goto err;
}
ret = regulator_bulk_enable(ARRAY_SIZE(wm8962->supplies),
wm8962->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
goto err_get;
}
wm8962->regmap = regmap_init_i2c(i2c, &wm8962_regmap);
if (IS_ERR(wm8962->regmap)) {
ret = PTR_ERR(wm8962->regmap);
dev_err(&i2c->dev, "Failed to allocate regmap: %d\n", ret);
goto err_enable;
}
/*
* We haven't marked the chip revision as volatile due to
* sharing a register with the right input volume; explicitly
* bypass the cache to read it.
*/
regcache_cache_bypass(wm8962->regmap, true);
ret = regmap_read(wm8962->regmap, WM8962_SOFTWARE_RESET, &reg);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to read ID register\n");
goto err_regmap;
}
if (reg != 0x6243) {
dev_err(&i2c->dev,
"Device is not a WM8962, ID %x != 0x6243\n", reg);
ret = -EINVAL;
goto err_regmap;
}
ret = regmap_read(wm8962->regmap, WM8962_RIGHT_INPUT_VOLUME, &reg);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to read device revision: %d\n",
ret);
goto err_regmap;
}
dev_info(&i2c->dev, "customer id %x revision %c\n",
(reg & WM8962_CUST_ID_MASK) >> WM8962_CUST_ID_SHIFT,
((reg & WM8962_CHIP_REV_MASK) >> WM8962_CHIP_REV_SHIFT)
+ 'A');
regcache_cache_bypass(wm8962->regmap, false);
ret = wm8962_reset(wm8962);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to issue reset\n");
goto err_regmap;
}
if (pdata && pdata->in4_dc_measure) {
ret = regmap_register_patch(wm8962->regmap,
wm8962_dc_measure,
ARRAY_SIZE(wm8962_dc_measure));
if (ret != 0)
dev_err(&i2c->dev,
"Failed to configure for DC mesurement: %d\n",
ret);
}
pm_runtime_set_active(&i2c->dev);
pm_runtime_enable(&i2c->dev);
pm_request_idle(&i2c->dev);
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8962, &wm8962_dai, 1);
if (ret < 0)
goto err_regmap;
/* The drivers should power up as needed */
regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies), wm8962->supplies);
return 0;
err_regmap:
regmap_exit(wm8962->regmap);
err_enable:
regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies), wm8962->supplies);
err_get:
regulator_bulk_free(ARRAY_SIZE(wm8962->supplies), wm8962->supplies);
err:
return ret;
}
static __devexit int wm8962_i2c_remove(struct i2c_client *client)
{
struct wm8962_priv *wm8962 = dev_get_drvdata(&client->dev);
snd_soc_unregister_codec(&client->dev);
regmap_exit(wm8962->regmap);
regulator_bulk_free(ARRAY_SIZE(wm8962->supplies), wm8962->supplies);
return 0;
}
#ifdef CONFIG_PM_RUNTIME
static int wm8962_runtime_resume(struct device *dev)
{
struct wm8962_priv *wm8962 = dev_get_drvdata(dev);
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(wm8962->supplies),
wm8962->supplies);
if (ret != 0) {
dev_err(dev,
"Failed to enable supplies: %d\n", ret);
return ret;
}
regcache_cache_only(wm8962->regmap, false);
regcache_sync(wm8962->regmap);
regmap_update_bits(wm8962->regmap, WM8962_ANTI_POP,
WM8962_STARTUP_BIAS_ENA | WM8962_VMID_BUF_ENA,
WM8962_STARTUP_BIAS_ENA | WM8962_VMID_BUF_ENA);
/* Bias enable at 2*50k for ramp */
regmap_update_bits(wm8962->regmap, WM8962_PWR_MGMT_1,
WM8962_VMID_SEL_MASK | WM8962_BIAS_ENA,
WM8962_BIAS_ENA | 0x180);
msleep(5);
/* VMID back to 2x250k for standby */
regmap_update_bits(wm8962->regmap, WM8962_PWR_MGMT_1,
WM8962_VMID_SEL_MASK, 0x100);
dev_crit(dev, "RESUME\n");
return 0;
}
static int wm8962_runtime_suspend(struct device *dev)
{
struct wm8962_priv *wm8962 = dev_get_drvdata(dev);
dev_crit(dev, "SUSPEND\n");
regmap_update_bits(wm8962->regmap, WM8962_PWR_MGMT_1,
WM8962_VMID_SEL_MASK | WM8962_BIAS_ENA, 0);
regmap_update_bits(wm8962->regmap, WM8962_ANTI_POP,
WM8962_STARTUP_BIAS_ENA |
WM8962_VMID_BUF_ENA, 0);
regcache_cache_only(wm8962->regmap, true);
regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies),
wm8962->supplies);
return 0;
}
#endif
static struct dev_pm_ops wm8962_pm = {
SET_RUNTIME_PM_OPS(wm8962_runtime_suspend, wm8962_runtime_resume, NULL)
};
static const struct i2c_device_id wm8962_i2c_id[] = {
{ "wm8962", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm8962_i2c_id);
static struct i2c_driver wm8962_i2c_driver = {
.driver = {
.name = "wm8962",
.owner = THIS_MODULE,
.pm = &wm8962_pm,
},
.probe = wm8962_i2c_probe,
.remove = __devexit_p(wm8962_i2c_remove),
.id_table = wm8962_i2c_id,
};
static int __init wm8962_modinit(void)
{
return i2c_add_driver(&wm8962_i2c_driver);
}
module_init(wm8962_modinit);
static void __exit wm8962_exit(void)
{
i2c_del_driver(&wm8962_i2c_driver);
}
module_exit(wm8962_exit);
MODULE_DESCRIPTION("ASoC WM8962 driver");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_LICENSE("GPL");