openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/mips/kernel/genex.S

669 lines
14 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1994 - 2000, 2001, 2003 Ralf Baechle
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 19:43:25 +08:00
* Copyright (C) 2002, 2007 Maciej W. Rozycki
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
* Copyright (C) 2001, 2012 MIPS Technologies, Inc. All rights reserved.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
#include <linux/init.h>
#include <asm/asm.h>
[MIPS] MT: Improved multithreading support. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-05 16:45:45 +08:00
#include <asm/asmmacro.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/cacheops.h>
[MIPS] TRACE_IRQFLAGS_SUPPORT support. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-07 21:07:18 +08:00
#include <asm/irqflags.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/regdef.h>
#include <asm/fpregdef.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
MIPS: genex: Add Loongson3 LL/SC workaround to ejtag_debug_handler In ejtag_debug_handler we use LL & SC instructions to acquire & release an open-coded spinlock. For Loongson3 systems affected by LL/SC errata this requires that we insert a sync instruction prior to the LL in order to ensure correct behavior of the LL/SC loop. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: linux-kernel@vger.kernel.org
2019-10-02 05:53:42 +08:00
#include <asm/sync.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/war.h>
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
#include <asm/thread_info.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
__INIT
/*
* General exception vector for all other CPUs.
*
* Be careful when changing this, it has to be at most 128 bytes
* to fit into space reserved for the exception handler.
*/
NESTED(except_vec3_generic, 0, sp)
.set push
.set noat
mfc0 k1, CP0_CAUSE
andi k1, k1, 0x7c
[PATCH] mips: clean up 32/64-bit configuration Start cleaning 32-bit vs. 64-bit configuration. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 06:56:16 +08:00
#ifdef CONFIG_64BIT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dsll k1, k1, 1
#endif
PTR_L k0, exception_handlers(k1)
jr k0
.set pop
END(except_vec3_generic)
/*
* General exception handler for CPUs with virtual coherency exception.
*
* Be careful when changing this, it has to be at most 256 (as a special
* exception) bytes to fit into space reserved for the exception handler.
*/
NESTED(except_vec3_r4000, 0, sp)
.set push
MIPS: Fix gigaton of warning building with microMIPS. With binutils 2.24 the attempt to switch with microMIPS mode to MIPS III mode through .set mips3 results in *lots* of warnings like {standard input}: Assembler messages: {standard input}:397: Warning: the 64-bit MIPS architecture does not support the `smartmips' extension during a kernel build. Fixed by using .set arch=r4000 instead. This breaks support for building the kernel with binutils 2.13 which was supported for 32 bit kernels only anyway and 2.14 which was a bad vintage for MIPS anyway. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-30 19:20:10 +08:00
.set arch=r4000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.set noat
mfc0 k1, CP0_CAUSE
li k0, 31<<2
andi k1, k1, 0x7c
.set push
.set noreorder
.set nomacro
beq k1, k0, handle_vced
li k0, 14<<2
beq k1, k0, handle_vcei
[PATCH] mips: clean up 32/64-bit configuration Start cleaning 32-bit vs. 64-bit configuration. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 06:56:16 +08:00
#ifdef CONFIG_64BIT
Fix typos and formatting. Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2004-12-08 18:32:45 +08:00
dsll k1, k1, 1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
.set pop
PTR_L k0, exception_handlers(k1)
jr k0
/*
* Big shit, we now may have two dirty primary cache lines for the same
Fix typos and formatting. Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2004-12-08 18:32:45 +08:00
* physical address. We can safely invalidate the line pointed to by
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* c0_badvaddr because after return from this exception handler the
* load / store will be re-executed.
*/
handle_vced:
Fix typos and formatting. Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2004-12-08 18:32:45 +08:00
MFC0 k0, CP0_BADVADDR
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
li k1, -4 # Is this ...
and k0, k1 # ... really needed?
mtc0 zero, CP0_TAGLO
Fix typos and formatting. Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2004-12-08 18:32:45 +08:00
cache Index_Store_Tag_D, (k0)
cache Hit_Writeback_Inv_SD, (k0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef CONFIG_PROC_FS
PTR_LA k0, vced_count
lw k1, (k0)
addiu k1, 1
sw k1, (k0)
#endif
eret
handle_vcei:
MFC0 k0, CP0_BADVADDR
cache Hit_Writeback_Inv_SD, (k0) # also cleans pi
#ifdef CONFIG_PROC_FS
PTR_LA k0, vcei_count
lw k1, (k0)
addiu k1, 1
sw k1, (k0)
#endif
eret
.set pop
END(except_vec3_r4000)
[MIPS] Rewrite all the assembler interrupt handlers to C. Saves like 1,600 lines of code, is way easier to debug, compilers frequently do a better job than the cut and paste type of handlers many boards had. And finally having all the stuff done in a single place also means alot of bug potencial for the MT ASE is gone. The only surviving handler in assembler is the DECstation one; I hope Maciej will rewrite it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-04 00:56:36 +08:00
__FINIT
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
.align 5 /* 32 byte rollback region */
MIPS: Idle: Break r4k_wait into two functions and fix it. local_irq_enable() may expand into very different code, so it rather should stay in C. Also this keeps the assembler code size constant which keeps the rollback code simple. So it's best to split r4k_wait into two parts, one C and one assembler. Finally add the local_irq_enable() to r4k_wait to ensure the WAIT instruction in __r4k_wait() will work properly. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-21 23:33:32 +08:00
LEAF(__r4k_wait)
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
.set push
.set noreorder
/* start of rollback region */
LONG_L t0, TI_FLAGS($28)
nop
andi t0, _TIF_NEED_RESCHED
bnez t0, 1f
nop
nop
nop
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
#ifdef CONFIG_CPU_MICROMIPS
nop
nop
nop
nop
#endif
MIPS: kernel: genex: Set correct ISA level The jr instruction opcode has changed in R6 so make sure the correct ISA level is set prior using that instruction. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-24 21:17:27 +08:00
.set MIPS_ISA_ARCH_LEVEL_RAW
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
wait
/* end of rollback region (the region size must be power of two) */
1:
jr ra
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
nop
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
.set pop
MIPS: Idle: Break r4k_wait into two functions and fix it. local_irq_enable() may expand into very different code, so it rather should stay in C. Also this keeps the assembler code size constant which keeps the rollback code simple. So it's best to split r4k_wait into two parts, one C and one assembler. Finally add the local_irq_enable() to r4k_wait to ensure the WAIT instruction in __r4k_wait() will work properly. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-21 23:33:32 +08:00
END(__r4k_wait)
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
.macro BUILD_ROLLBACK_PROLOGUE handler
FEXPORT(rollback_\handler)
.set push
.set noat
MFC0 k0, CP0_EPC
MIPS: Idle: Break r4k_wait into two functions and fix it. local_irq_enable() may expand into very different code, so it rather should stay in C. Also this keeps the assembler code size constant which keeps the rollback code simple. So it's best to split r4k_wait into two parts, one C and one assembler. Finally add the local_irq_enable() to r4k_wait to ensure the WAIT instruction in __r4k_wait() will work properly. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-21 23:33:32 +08:00
PTR_LA k1, __r4k_wait
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
ori k0, 0x1f /* 32 byte rollback region */
xori k0, 0x1f
MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS When the kernel is built for microMIPS, branches targets need to be known to be microMIPS code in order to result in bit 0 of the PC being set. The branch target in the BUILD_ROLLBACK_PROLOGUE macro was simply the end of the macro, which may be pointing at padding rather than at code. This results in recent enough GNU linkers complaining like so: mips-img-linux-gnu-ld: arch/mips/built-in.o: .text+0x3e3c: Unsupported branch between ISA modes. mips-img-linux-gnu-ld: final link failed: Bad value Makefile:936: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 Fix this by changing the branch target to be the start of the appropriate handler, skipping over any padding. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14019/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-20 01:15:40 +08:00
bne k0, k1, \handler
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
MTC0 k0, CP0_EPC
.set pop
.endm
MIPS: Whitespace cleanup. Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-01-22 19:59:30 +08:00
.align 5
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
BUILD_ROLLBACK_PROLOGUE handle_int
[MIPS] Rewrite all the assembler interrupt handlers to C. Saves like 1,600 lines of code, is way easier to debug, compilers frequently do a better job than the cut and paste type of handlers many boards had. And finally having all the stuff done in a single place also means alot of bug potencial for the MT ASE is gone. The only surviving handler in assembler is the DECstation one; I hope Maciej will rewrite it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-04 00:56:36 +08:00
NESTED(handle_int, PT_SIZE, sp)
MIPS: Add DWARF unwinding to assembly This will allow kdump dumps to work correclty with MIPS and future DWARF unwinding of the stack to give accurate tracebacks. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16990/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-11 02:27:39 +08:00
.cfi_signal_frame
[MIPS] lockdep: Deal with interrupt disable hazard in TRACE_IRQFLAGS Between the mtc0 or di instruction that disables interrupts and the following hazard barrier a processor may still take interrupts. If an interrupt is taken after interrupts are disabled but before the state is updated it will appear to restore_all that it is incorrectly returning with interrupts disabled. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-26 21:48:50 +08:00
#ifdef CONFIG_TRACE_IRQFLAGS
/*
* Check to see if the interrupted code has just disabled
* interrupts and ignore this interrupt for now if so.
*
* local_irq_disable() disables interrupts and then calls
* trace_hardirqs_off() to track the state. If an interrupt is taken
* after interrupts are disabled but before the state is updated
* it will appear to restore_all that it is incorrectly returning with
* interrupts disabled
*/
.set push
.set noat
mfc0 k0, CP0_STATUS
#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
and k0, ST0_IEP
bnez k0, 1f
[MIPS] Fix typo in R3000 TRACE_IRQFLAGS code Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-07 00:08:48 +08:00
mfc0 k0, CP0_EPC
[MIPS] lockdep: Deal with interrupt disable hazard in TRACE_IRQFLAGS Between the mtc0 or di instruction that disables interrupts and the following hazard barrier a processor may still take interrupts. If an interrupt is taken after interrupts are disabled but before the state is updated it will appear to restore_all that it is incorrectly returning with interrupts disabled. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-26 21:48:50 +08:00
.set noreorder
j k0
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
rfe
[MIPS] lockdep: Deal with interrupt disable hazard in TRACE_IRQFLAGS Between the mtc0 or di instruction that disables interrupts and the following hazard barrier a processor may still take interrupts. If an interrupt is taken after interrupts are disabled but before the state is updated it will appear to restore_all that it is incorrectly returning with interrupts disabled. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-26 21:48:50 +08:00
#else
and k0, ST0_IE
bnez k0, 1f
eret
#endif
1:
.set pop
#endif
MIPS: Add DWARF unwinding to assembly This will allow kdump dumps to work correclty with MIPS and future DWARF unwinding of the stack to give accurate tracebacks. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16990/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-11 02:27:39 +08:00
SAVE_ALL docfi=1
[MIPS] Rewrite all the assembler interrupt handlers to C. Saves like 1,600 lines of code, is way easier to debug, compilers frequently do a better job than the cut and paste type of handlers many boards had. And finally having all the stuff done in a single place also means alot of bug potencial for the MT ASE is gone. The only surviving handler in assembler is the DECstation one; I hope Maciej will rewrite it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-04 00:56:36 +08:00
CLI
[MIPS] TRACE_IRQFLAGS_SUPPORT support. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-07 21:07:18 +08:00
TRACE_IRQS_OFF
[MIPS] Rewrite all the assembler interrupt handlers to C. Saves like 1,600 lines of code, is way easier to debug, compilers frequently do a better job than the cut and paste type of handlers many boards had. And finally having all the stuff done in a single place also means alot of bug potencial for the MT ASE is gone. The only surviving handler in assembler is the DECstation one; I hope Maciej will rewrite it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-04 00:56:36 +08:00
[MIPS] Complete fixes after removal of pt_regs argument to int handlers. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-08 02:44:33 +08:00
LONG_L s0, TI_REGS($28)
LONG_S sp, TI_REGS($28)
MIPS: Switch to the irq_stack in interrupts When enterring interrupt context via handle_int or except_vec_vi, switch to the irq_stack of the current CPU if it is not already in use. The current stack pointer is masked with the thread size and compared to the base or the irq stack. If it does not match then the stack pointer is set to the top of that stack, otherwise this is a nested irq being handled on the irq stack so the stack pointer should be left as it was. The in-use stack pointer is placed in the callee saved register s1. It will be saved to the stack when plat_irq_dispatch is invoked and can be restored once control returns here. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Acked-by: Jason A. Donenfeld <jason@zx2c4.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14743/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-12-19 22:20:59 +08:00
/*
* SAVE_ALL ensures we are using a valid kernel stack for the thread.
* Check if we are already using the IRQ stack.
*/
move s1, sp # Preserve the sp
/* Get IRQ stack for this CPU */
ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG
#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
lui k1, %hi(irq_stack)
#else
lui k1, %highest(irq_stack)
daddiu k1, %higher(irq_stack)
dsll k1, 16
daddiu k1, %hi(irq_stack)
dsll k1, 16
#endif
LONG_SRL k0, SMP_CPUID_PTRSHIFT
LONG_ADDU k1, k0
LONG_L t0, %lo(irq_stack)(k1)
# Check if already on IRQ stack
PTR_LI t1, ~(_THREAD_SIZE-1)
and t1, t1, sp
beq t0, t1, 2f
/* Switch to IRQ stack */
MIPS: IRQ Stack: Unwind IRQ stack onto task stack When the separate IRQ stack was introduced, stack unwinding only proceeded as far as the top of the IRQ stack, leading to kernel backtraces being less useful, lacking the trace of what was interrupted. Fix this by providing a means for the kernel to unwind the IRQ stack onto the interrupted task stack. The processor state is saved to the kernel task stack on interrupt. The IRQ_STACK_START macro reserves an unsigned long at the top of the IRQ stack where the interrupted task stack pointer can be saved. After the active stack is switched to the IRQ stack, save the interrupted tasks stack pointer to the reserved location. Fix the stack unwinding code to look for the frame being the top of the IRQ stack and if so get the next frame from the saved location. The existing test does not work with the separate stack since the ra is no longer pointed at ret_from_{irq,exception}. The test to stop unwinding the stack 32 bytes from the top of a stack must be modified to allow unwinding to continue up to the location of the saved task stack pointer when on the IRQ stack. The low / high marks of the stack are set depending on whether the sp is on an irq stack or not. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15788/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-03-21 22:52:25 +08:00
li t1, _IRQ_STACK_START
MIPS: Switch to the irq_stack in interrupts When enterring interrupt context via handle_int or except_vec_vi, switch to the irq_stack of the current CPU if it is not already in use. The current stack pointer is masked with the thread size and compared to the base or the irq stack. If it does not match then the stack pointer is set to the top of that stack, otherwise this is a nested irq being handled on the irq stack so the stack pointer should be left as it was. The in-use stack pointer is placed in the callee saved register s1. It will be saved to the stack when plat_irq_dispatch is invoked and can be restored once control returns here. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Acked-by: Jason A. Donenfeld <jason@zx2c4.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14743/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-12-19 22:20:59 +08:00
PTR_ADD sp, t0, t1
MIPS: IRQ Stack: Unwind IRQ stack onto task stack When the separate IRQ stack was introduced, stack unwinding only proceeded as far as the top of the IRQ stack, leading to kernel backtraces being less useful, lacking the trace of what was interrupted. Fix this by providing a means for the kernel to unwind the IRQ stack onto the interrupted task stack. The processor state is saved to the kernel task stack on interrupt. The IRQ_STACK_START macro reserves an unsigned long at the top of the IRQ stack where the interrupted task stack pointer can be saved. After the active stack is switched to the IRQ stack, save the interrupted tasks stack pointer to the reserved location. Fix the stack unwinding code to look for the frame being the top of the IRQ stack and if so get the next frame from the saved location. The existing test does not work with the separate stack since the ra is no longer pointed at ret_from_{irq,exception}. The test to stop unwinding the stack 32 bytes from the top of a stack must be modified to allow unwinding to continue up to the location of the saved task stack pointer when on the IRQ stack. The low / high marks of the stack are set depending on whether the sp is on an irq stack or not. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15788/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-03-21 22:52:25 +08:00
/* Save task's sp on IRQ stack so that unwinding can follow it */
LONG_S s1, 0(sp)
MIPS: Switch to the irq_stack in interrupts When enterring interrupt context via handle_int or except_vec_vi, switch to the irq_stack of the current CPU if it is not already in use. The current stack pointer is masked with the thread size and compared to the base or the irq stack. If it does not match then the stack pointer is set to the top of that stack, otherwise this is a nested irq being handled on the irq stack so the stack pointer should be left as it was. The in-use stack pointer is placed in the callee saved register s1. It will be saved to the stack when plat_irq_dispatch is invoked and can be restored once control returns here. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Acked-by: Jason A. Donenfeld <jason@zx2c4.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14743/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-12-19 22:20:59 +08:00
2:
jal plat_irq_dispatch
/* Restore sp */
move sp, s1
j ret_from_irq
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
#ifdef CONFIG_CPU_MICROMIPS
nop
#endif
[MIPS] Rewrite all the assembler interrupt handlers to C. Saves like 1,600 lines of code, is way easier to debug, compilers frequently do a better job than the cut and paste type of handlers many boards had. And finally having all the stuff done in a single place also means alot of bug potencial for the MT ASE is gone. The only surviving handler in assembler is the DECstation one; I hope Maciej will rewrite it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-04 00:56:36 +08:00
END(handle_int)
__INIT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Special interrupt vector for MIPS64 ISA & embedded MIPS processors.
* This is a dedicated interrupt exception vector which reduces the
* interrupt processing overhead. The jump instruction will be replaced
* at the initialization time.
*
* Be careful when changing this, it has to be at most 128 bytes
* to fit into space reserved for the exception handler.
*/
NESTED(except_vec4, 0, sp)
1: j 1b /* Dummy, will be replaced */
END(except_vec4)
/*
* EJTAG debug exception handler.
* The EJTAG debug exception entry point is 0xbfc00480, which
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
* normally is in the boot PROM, so the boot PROM must do an
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* unconditional jump to this vector.
*/
NESTED(except_vec_ejtag_debug, 0, sp)
j ejtag_debug_handler
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
#ifdef CONFIG_CPU_MICROMIPS
nop
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
END(except_vec_ejtag_debug)
__FINIT
More AP / SP bits for the 34K, the Malta bits and things. Still wants a little polishing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-07-14 23:57:16 +08:00
/*
* Vectored interrupt handler.
* This prototype is copied to ebase + n*IntCtl.VS and patched
* to invoke the handler
*/
[MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-12 01:05:18 +08:00
BUILD_ROLLBACK_PROLOGUE except_vec_vi
More AP / SP bits for the 34K, the Malta bits and things. Still wants a little polishing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-07-14 23:57:16 +08:00
NESTED(except_vec_vi, 0, sp)
MIPS: Add DWARF unwinding to assembly This will allow kdump dumps to work correclty with MIPS and future DWARF unwinding of the stack to give accurate tracebacks. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16990/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-11 02:27:39 +08:00
SAVE_SOME docfi=1
SAVE_AT docfi=1
More AP / SP bits for the 34K, the Malta bits and things. Still wants a little polishing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-07-14 23:57:16 +08:00
.set push
.set noreorder
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
PTR_LA v1, except_vec_vi_handler
[MIPS] Export except_vec_vi_{mori,lui,ori} as text symbols. Otherwise objdump will screw up disassembly. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-19 23:29:39 +08:00
FEXPORT(except_vec_vi_lui)
More AP / SP bits for the 34K, the Malta bits and things. Still wants a little polishing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-07-14 23:57:16 +08:00
lui v0, 0 /* Patched */
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
jr v1
[MIPS] Export except_vec_vi_{mori,lui,ori} as text symbols. Otherwise objdump will screw up disassembly. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-19 23:29:39 +08:00
FEXPORT(except_vec_vi_ori)
More AP / SP bits for the 34K, the Malta bits and things. Still wants a little polishing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-07-14 23:57:16 +08:00
ori v0, 0 /* Patched */
.set pop
END(except_vec_vi)
EXPORT(except_vec_vi_end)
/*
* Common Vectored Interrupt code
* Complete the register saves and invoke the handler which is passed in $v0
*/
NESTED(except_vec_vi_handler, 0, sp)
SAVE_TEMP
SAVE_STATIC
CLI
[MIPS] VI: TRACE_IRQS_OFF clobbers $v0, so save & restore around call. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-18 00:21:28 +08:00
#ifdef CONFIG_TRACE_IRQFLAGS
move s0, v0
[MIPS] TRACE_IRQFLAGS_SUPPORT support. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-07 21:07:18 +08:00
TRACE_IRQS_OFF
[MIPS] VI: TRACE_IRQS_OFF clobbers $v0, so save & restore around call. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-18 00:21:28 +08:00
move v0, s0
#endif
[MIPS] Complete fixes after removal of pt_regs argument to int handlers. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-08 02:44:33 +08:00
LONG_L s0, TI_REGS($28)
LONG_S sp, TI_REGS($28)
MIPS: Switch to the irq_stack in interrupts When enterring interrupt context via handle_int or except_vec_vi, switch to the irq_stack of the current CPU if it is not already in use. The current stack pointer is masked with the thread size and compared to the base or the irq stack. If it does not match then the stack pointer is set to the top of that stack, otherwise this is a nested irq being handled on the irq stack so the stack pointer should be left as it was. The in-use stack pointer is placed in the callee saved register s1. It will be saved to the stack when plat_irq_dispatch is invoked and can be restored once control returns here. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Acked-by: Jason A. Donenfeld <jason@zx2c4.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14743/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-12-19 22:20:59 +08:00
/*
* SAVE_ALL ensures we are using a valid kernel stack for the thread.
* Check if we are already using the IRQ stack.
*/
move s1, sp # Preserve the sp
/* Get IRQ stack for this CPU */
ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG
#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
lui k1, %hi(irq_stack)
#else
lui k1, %highest(irq_stack)
daddiu k1, %higher(irq_stack)
dsll k1, 16
daddiu k1, %hi(irq_stack)
dsll k1, 16
#endif
LONG_SRL k0, SMP_CPUID_PTRSHIFT
LONG_ADDU k1, k0
LONG_L t0, %lo(irq_stack)(k1)
# Check if already on IRQ stack
PTR_LI t1, ~(_THREAD_SIZE-1)
and t1, t1, sp
beq t0, t1, 2f
/* Switch to IRQ stack */
MIPS: IRQ Stack: Unwind IRQ stack onto task stack When the separate IRQ stack was introduced, stack unwinding only proceeded as far as the top of the IRQ stack, leading to kernel backtraces being less useful, lacking the trace of what was interrupted. Fix this by providing a means for the kernel to unwind the IRQ stack onto the interrupted task stack. The processor state is saved to the kernel task stack on interrupt. The IRQ_STACK_START macro reserves an unsigned long at the top of the IRQ stack where the interrupted task stack pointer can be saved. After the active stack is switched to the IRQ stack, save the interrupted tasks stack pointer to the reserved location. Fix the stack unwinding code to look for the frame being the top of the IRQ stack and if so get the next frame from the saved location. The existing test does not work with the separate stack since the ra is no longer pointed at ret_from_{irq,exception}. The test to stop unwinding the stack 32 bytes from the top of a stack must be modified to allow unwinding to continue up to the location of the saved task stack pointer when on the IRQ stack. The low / high marks of the stack are set depending on whether the sp is on an irq stack or not. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15788/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-03-21 22:52:25 +08:00
li t1, _IRQ_STACK_START
MIPS: Switch to the irq_stack in interrupts When enterring interrupt context via handle_int or except_vec_vi, switch to the irq_stack of the current CPU if it is not already in use. The current stack pointer is masked with the thread size and compared to the base or the irq stack. If it does not match then the stack pointer is set to the top of that stack, otherwise this is a nested irq being handled on the irq stack so the stack pointer should be left as it was. The in-use stack pointer is placed in the callee saved register s1. It will be saved to the stack when plat_irq_dispatch is invoked and can be restored once control returns here. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Acked-by: Jason A. Donenfeld <jason@zx2c4.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14743/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-12-19 22:20:59 +08:00
PTR_ADD sp, t0, t1
MIPS: IRQ Stack: Unwind IRQ stack onto task stack When the separate IRQ stack was introduced, stack unwinding only proceeded as far as the top of the IRQ stack, leading to kernel backtraces being less useful, lacking the trace of what was interrupted. Fix this by providing a means for the kernel to unwind the IRQ stack onto the interrupted task stack. The processor state is saved to the kernel task stack on interrupt. The IRQ_STACK_START macro reserves an unsigned long at the top of the IRQ stack where the interrupted task stack pointer can be saved. After the active stack is switched to the IRQ stack, save the interrupted tasks stack pointer to the reserved location. Fix the stack unwinding code to look for the frame being the top of the IRQ stack and if so get the next frame from the saved location. The existing test does not work with the separate stack since the ra is no longer pointed at ret_from_{irq,exception}. The test to stop unwinding the stack 32 bytes from the top of a stack must be modified to allow unwinding to continue up to the location of the saved task stack pointer when on the IRQ stack. The low / high marks of the stack are set depending on whether the sp is on an irq stack or not. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15788/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-03-21 22:52:25 +08:00
/* Save task's sp on IRQ stack so that unwinding can follow it */
LONG_S s1, 0(sp)
MIPS: Switch to the irq_stack in interrupts When enterring interrupt context via handle_int or except_vec_vi, switch to the irq_stack of the current CPU if it is not already in use. The current stack pointer is masked with the thread size and compared to the base or the irq stack. If it does not match then the stack pointer is set to the top of that stack, otherwise this is a nested irq being handled on the irq stack so the stack pointer should be left as it was. The in-use stack pointer is placed in the callee saved register s1. It will be saved to the stack when plat_irq_dispatch is invoked and can be restored once control returns here. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Acked-by: Jason A. Donenfeld <jason@zx2c4.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14743/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-12-19 22:20:59 +08:00
2:
MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch Commit dda45f701c9d ("MIPS: Switch to the irq_stack in interrupts") changed both the normal and vectored interrupt handlers. Unfortunately the vectored version, "except_vec_vi_handler", was incorrectly modified to unconditionally jal to plat_irq_dispatch, rather than doing a jalr to the vectored handler that has been set up. This is ok for many platforms which set the vectored handler to plat_irq_dispatch anyway, but will cause problems with platforms that use other handlers. Fixes: dda45f701c9d ("MIPS: Switch to the irq_stack in interrupts") Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15110/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-01-26 01:00:25 +08:00
jalr v0
MIPS: Switch to the irq_stack in interrupts When enterring interrupt context via handle_int or except_vec_vi, switch to the irq_stack of the current CPU if it is not already in use. The current stack pointer is masked with the thread size and compared to the base or the irq stack. If it does not match then the stack pointer is set to the top of that stack, otherwise this is a nested irq being handled on the irq stack so the stack pointer should be left as it was. The in-use stack pointer is placed in the callee saved register s1. It will be saved to the stack when plat_irq_dispatch is invoked and can be restored once control returns here. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Acked-by: Jason A. Donenfeld <jason@zx2c4.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14743/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-12-19 22:20:59 +08:00
/* Restore sp */
move sp, s1
j ret_from_irq
More AP / SP bits for the 34K, the Malta bits and things. Still wants a little polishing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-07-14 23:57:16 +08:00
END(except_vec_vi_handler)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* EJTAG debug exception handler.
*/
NESTED(ejtag_debug_handler, PT_SIZE, sp)
.set push
.set noat
MTC0 k0, CP0_DESAVE
mfc0 k0, CP0_DEBUG
sll k0, k0, 30 # Check for SDBBP.
bgez k0, ejtag_return
MIPS: Fix ejtag handler on SMP On SMP systems, the shared ejtag debug buffer may be overwritten by other cores, because every cores can generate ejtag exception at same time. Unfortunately, in that context, it's difficult to relax more registers to access per cpu buffers. so use ll/sc to serialize the access. [paul.burton@mips.com: This could in theory be backported at least as far back as the beginning of the git era, however in general it's exceedingly rare that anyone would hit this without further changes, so it doesn't seem worthwhile marking for backport.] Signed-off-by: Heiher <r@hev.cc> Patchwork: https://patchwork.linux-mips.org/patch/19507/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: jhogan@kernel.org Cc: ralf@linux-mips.org
2018-06-11 17:01:10 +08:00
#ifdef CONFIG_SMP
1: PTR_LA k0, ejtag_debug_buffer_spinlock
MIPS: genex: Add Loongson3 LL/SC workaround to ejtag_debug_handler In ejtag_debug_handler we use LL & SC instructions to acquire & release an open-coded spinlock. For Loongson3 systems affected by LL/SC errata this requires that we insert a sync instruction prior to the LL in order to ensure correct behavior of the LL/SC loop. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: linux-kernel@vger.kernel.org
2019-10-02 05:53:42 +08:00
__SYNC(full, loongson3_war)
MIPS: genex: Don't reload address unnecessarily In ejtag_debug_handler() we must reload the address of ejtag_debug_buffer_spinlock if an sc fails, since the address in k0 will have been clobbered by the result of the sc instruction. In the case where we simply load a non-zero value (ie. there's contention for the lock) the address will not be clobbered & we can simply branch back to repeat the load from memory without reloading the address into k0. The primary motivation for this change is that it moves the target of the bnez instruction to an instruction within the LL/SC loop (the LL itself), which we know contains no other memory accesses & therefore isn't affected by Loongson3 LL/SC errata. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: linux-kernel@vger.kernel.org
2019-10-02 05:53:43 +08:00
2: ll k0, 0(k0)
bnez k0, 2b
MIPS: Fix ejtag handler on SMP On SMP systems, the shared ejtag debug buffer may be overwritten by other cores, because every cores can generate ejtag exception at same time. Unfortunately, in that context, it's difficult to relax more registers to access per cpu buffers. so use ll/sc to serialize the access. [paul.burton@mips.com: This could in theory be backported at least as far back as the beginning of the git era, however in general it's exceedingly rare that anyone would hit this without further changes, so it doesn't seem worthwhile marking for backport.] Signed-off-by: Heiher <r@hev.cc> Patchwork: https://patchwork.linux-mips.org/patch/19507/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: jhogan@kernel.org Cc: ralf@linux-mips.org
2018-06-11 17:01:10 +08:00
PTR_LA k0, ejtag_debug_buffer_spinlock
sc k0, 0(k0)
beqz k0, 1b
# ifdef CONFIG_WEAK_REORDERING_BEYOND_LLSC
sync
# endif
PTR_LA k0, ejtag_debug_buffer
LONG_S k1, 0(k0)
ASM_CPUID_MFC0 k1, ASM_SMP_CPUID_REG
PTR_SRL k1, SMP_CPUID_PTRSHIFT
PTR_SLL k1, LONGLOG
PTR_LA k0, ejtag_debug_buffer_per_cpu
PTR_ADDU k0, k1
PTR_LA k1, ejtag_debug_buffer
LONG_L k1, 0(k1)
LONG_S k1, 0(k0)
PTR_LA k0, ejtag_debug_buffer_spinlock
sw zero, 0(k0)
#else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PTR_LA k0, ejtag_debug_buffer
LONG_S k1, 0(k0)
MIPS: Fix ejtag handler on SMP On SMP systems, the shared ejtag debug buffer may be overwritten by other cores, because every cores can generate ejtag exception at same time. Unfortunately, in that context, it's difficult to relax more registers to access per cpu buffers. so use ll/sc to serialize the access. [paul.burton@mips.com: This could in theory be backported at least as far back as the beginning of the git era, however in general it's exceedingly rare that anyone would hit this without further changes, so it doesn't seem worthwhile marking for backport.] Signed-off-by: Heiher <r@hev.cc> Patchwork: https://patchwork.linux-mips.org/patch/19507/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: jhogan@kernel.org Cc: ralf@linux-mips.org
2018-06-11 17:01:10 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
SAVE_ALL
move a0, sp
jal ejtag_exception_handler
RESTORE_ALL
MIPS: Fix ejtag handler on SMP On SMP systems, the shared ejtag debug buffer may be overwritten by other cores, because every cores can generate ejtag exception at same time. Unfortunately, in that context, it's difficult to relax more registers to access per cpu buffers. so use ll/sc to serialize the access. [paul.burton@mips.com: This could in theory be backported at least as far back as the beginning of the git era, however in general it's exceedingly rare that anyone would hit this without further changes, so it doesn't seem worthwhile marking for backport.] Signed-off-by: Heiher <r@hev.cc> Patchwork: https://patchwork.linux-mips.org/patch/19507/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: jhogan@kernel.org Cc: ralf@linux-mips.org
2018-06-11 17:01:10 +08:00
#ifdef CONFIG_SMP
ASM_CPUID_MFC0 k1, ASM_SMP_CPUID_REG
PTR_SRL k1, SMP_CPUID_PTRSHIFT
PTR_SLL k1, LONGLOG
PTR_LA k0, ejtag_debug_buffer_per_cpu
PTR_ADDU k0, k1
LONG_L k1, 0(k0)
#else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PTR_LA k0, ejtag_debug_buffer
LONG_L k1, 0(k0)
MIPS: Fix ejtag handler on SMP On SMP systems, the shared ejtag debug buffer may be overwritten by other cores, because every cores can generate ejtag exception at same time. Unfortunately, in that context, it's difficult to relax more registers to access per cpu buffers. so use ll/sc to serialize the access. [paul.burton@mips.com: This could in theory be backported at least as far back as the beginning of the git era, however in general it's exceedingly rare that anyone would hit this without further changes, so it doesn't seem worthwhile marking for backport.] Signed-off-by: Heiher <r@hev.cc> Patchwork: https://patchwork.linux-mips.org/patch/19507/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: jhogan@kernel.org Cc: ralf@linux-mips.org
2018-06-11 17:01:10 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ejtag_return:
MIPS: Fix ejtag handler on SMP On SMP systems, the shared ejtag debug buffer may be overwritten by other cores, because every cores can generate ejtag exception at same time. Unfortunately, in that context, it's difficult to relax more registers to access per cpu buffers. so use ll/sc to serialize the access. [paul.burton@mips.com: This could in theory be backported at least as far back as the beginning of the git era, however in general it's exceedingly rare that anyone would hit this without further changes, so it doesn't seem worthwhile marking for backport.] Signed-off-by: Heiher <r@hev.cc> Patchwork: https://patchwork.linux-mips.org/patch/19507/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: jhogan@kernel.org Cc: ralf@linux-mips.org
2018-06-11 17:01:10 +08:00
back_to_back_c0_hazard
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
MFC0 k0, CP0_DESAVE
.set mips32
deret
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
.set pop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
END(ejtag_debug_handler)
/*
* This buffer is reserved for the use of the EJTAG debug
* handler.
*/
.data
EXPORT(ejtag_debug_buffer)
.fill LONGSIZE
MIPS: Fix ejtag handler on SMP On SMP systems, the shared ejtag debug buffer may be overwritten by other cores, because every cores can generate ejtag exception at same time. Unfortunately, in that context, it's difficult to relax more registers to access per cpu buffers. so use ll/sc to serialize the access. [paul.burton@mips.com: This could in theory be backported at least as far back as the beginning of the git era, however in general it's exceedingly rare that anyone would hit this without further changes, so it doesn't seem worthwhile marking for backport.] Signed-off-by: Heiher <r@hev.cc> Patchwork: https://patchwork.linux-mips.org/patch/19507/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: jhogan@kernel.org Cc: ralf@linux-mips.org
2018-06-11 17:01:10 +08:00
#ifdef CONFIG_SMP
EXPORT(ejtag_debug_buffer_spinlock)
.fill LONGSIZE
EXPORT(ejtag_debug_buffer_per_cpu)
.fill LONGSIZE * NR_CPUS
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.previous
__INIT
/*
* NMI debug exception handler for MIPS reference boards.
* The NMI debug exception entry point is 0xbfc00000, which
* normally is in the boot PROM, so the boot PROM must do a
* unconditional jump to this vector.
*/
NESTED(except_vec_nmi, 0, sp)
j nmi_handler
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
#ifdef CONFIG_CPU_MICROMIPS
nop
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
END(except_vec_nmi)
__FINIT
NESTED(nmi_handler, PT_SIZE, sp)
MIPS: Add DWARF unwinding to assembly This will allow kdump dumps to work correclty with MIPS and future DWARF unwinding of the stack to give accurate tracebacks. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16990/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-11 02:27:39 +08:00
.cfi_signal_frame
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.set push
.set noat
MIPS: Print correct PC in trace dump after NMI exception An NMI exception delivered from YAMON delivers the PC in ErrorPC instead of EPC. It's also necessary to clear the Status.BEV bit for the page fault exception handler to work properly. [ralf@linux-mips: Let the assembler do the loading of the mask value rather than the convoluted explicit %hi/%lo manual relocation sequence from the original patch.] Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6035/ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/6084/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-08 19:39:31 +08:00
/*
* Clear ERL - restore segment mapping
* Clear BEV - required for page fault exception handler to work
*/
mfc0 k0, CP0_STATUS
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
ori k0, k0, ST0_EXL
MIPS: Print correct PC in trace dump after NMI exception An NMI exception delivered from YAMON delivers the PC in ErrorPC instead of EPC. It's also necessary to clear the Status.BEV bit for the page fault exception handler to work properly. [ralf@linux-mips: Let the assembler do the loading of the mask value rather than the convoluted explicit %hi/%lo manual relocation sequence from the original patch.] Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6035/ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/6084/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-08 19:39:31 +08:00
li k1, ~(ST0_BEV | ST0_ERL)
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
and k0, k0, k1
mtc0 k0, CP0_STATUS
MIPS: Print correct PC in trace dump after NMI exception An NMI exception delivered from YAMON delivers the PC in ErrorPC instead of EPC. It's also necessary to clear the Status.BEV bit for the page fault exception handler to work properly. [ralf@linux-mips: Let the assembler do the loading of the mask value rather than the convoluted explicit %hi/%lo manual relocation sequence from the original patch.] Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6035/ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/6084/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-08 19:39:31 +08:00
_ehb
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
SAVE_ALL
MIPS: Whitespace cleanup. Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-01-22 19:59:30 +08:00
move a0, sp
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
jal nmi_exception_handler
MIPS: Print correct PC in trace dump after NMI exception An NMI exception delivered from YAMON delivers the PC in ErrorPC instead of EPC. It's also necessary to clear the Status.BEV bit for the page fault exception handler to work properly. [ralf@linux-mips: Let the assembler do the loading of the mask value rather than the convoluted explicit %hi/%lo manual relocation sequence from the original patch.] Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6035/ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/6084/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-08 19:39:31 +08:00
/* nmi_exception_handler never returns */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.set pop
END(nmi_handler)
.macro __build_clear_none
.endm
.macro __build_clear_sti
[MIPS] TRACE_IRQFLAGS_SUPPORT support. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-07 21:07:18 +08:00
TRACE_IRQS_ON
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
STI
.endm
.macro __build_clear_cli
CLI
[MIPS] TRACE_IRQFLAGS_SUPPORT support. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-07 21:07:18 +08:00
TRACE_IRQS_OFF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.endm
.macro __build_clear_fpe
MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe() Register "a1" is unsaved in this function, when CONFIG_TRACE_IRQFLAGS is enabled, the TRACE_IRQS_OFF macro will call trace_hardirqs_off(), and this may change register "a1". The changed register "a1" as argument will be send to do_fpe() and do_msa_fpe(). Signed-off-by: YuanJunQing <yuanjunqing66@163.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27 14:11:30 +08:00
CLI
TRACE_IRQS_OFF
MIPS: Override assembler target architecture for octeon. Gas from binutils 2.19 fails to compile some cop1 instructions with -march=octeon. Since the cop1 instructions are present in mips1, use that arch instead. This will be fixed in binutils 2.20. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-12 07:33:25 +08:00
.set push
/* gas fails to assemble cfc1 for some archs (octeon).*/ \
.set mips1
MIPS: Fix build with binutils 2.24.51+ Starting with version 2.24.51.20140728 MIPS binutils complain loudly about mixing soft-float and hard-float object files, leading to this build failure since GCC is invoked with "-msoft-float" on MIPS: {standard input}: Warning: .gnu_attribute 4,3 requires `softfloat' LD arch/mips/alchemy/common/built-in.o mipsel-softfloat-linux-gnu-ld: Warning: arch/mips/alchemy/common/built-in.o uses -msoft-float (set by arch/mips/alchemy/common/prom.o), arch/mips/alchemy/common/sleeper.o uses -mhard-float To fix this, we detect if GAS is new enough to support "-msoft-float" command option, and if it does, we can let GCC pass it to GAS; but then we also need to sprinkle the files which make use of floating point registers with the necessary ".set hardfloat" directives. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: Markos Chandras <Markos.Chandras@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/8355/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-07 21:13:54 +08:00
SET_HARDFLOAT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
cfc1 a1, fcr31
MIPS: Override assembler target architecture for octeon. Gas from binutils 2.19 fails to compile some cop1 instructions with -march=octeon. Since the cop1 instructions are present in mips1, use that arch instead. This will be fixed in binutils 2.20. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-12 07:33:25 +08:00
.set pop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.endm
MIPS: clear MSACSR cause bits when handling MSA FP exception Much like for traditional scalar FP exceptions, the cause bits in the MSACSR register need to be cleared following an MSA FP exception. Without doing so the exception will simply be raised again whenever the kernel restores MSACSR from a tasks saved context, leading to undesirable spurious exceptions. Clear the cause bits from the handle_msa_fpe function, mirroring the way handle_fpe clears the cause bits in FCSR. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-01-30 20:09:34 +08:00
.macro __build_clear_msa_fpe
MIPS: Clear [MSA]FPE CSR.Cause after notify_die() When handling floating point exceptions (FPEs) and MSA FPEs the Cause bits of the appropriate control and status register (FCSR for FPEs and MSACSR for MSA FPEs) are read and cleared before enabling interrupts, presumably so that it doesn't have to go through the pain of restoring those bits if the process is pre-empted, since writing those bits would cause another immediate exception while still in the kernel. The bits aren't normally ever restored again, since userland never expects to see them set. However for virtualisation it is necessary for the kernel to be able to restore these Cause bits, as the guest may have been interrupted in an FP exception handler but before it could read the Cause bits. This can be done by registering a die notifier, to get notified of the exception when such a value is restored, and if the PC was at the instruction which is used to restore the guest state, the handler can step over it and continue execution. The Cause bits can then remain set without causing further exceptions. For this to work safely a few changes are made: - __build_clear_fpe and __build_clear_msa_fpe no longer clear the Cause bits, and now return from exception level with interrupts disabled instead of enabled. - do_fpe() now clears the Cause bits and enables interrupts after notify_die() is called, so that the notifier can chose to return from exception without this happening. - do_msa_fpe() acts similarly, but now actually makes use of the second argument (msacsr) and calls notify_die() with the new DIE_MSAFP, allowing die notifiers to be informed of MSA FPEs too. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-12-02 21:44:13 +08:00
CLI
TRACE_IRQS_OFF
MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe() Register "a1" is unsaved in this function, when CONFIG_TRACE_IRQFLAGS is enabled, the TRACE_IRQS_OFF macro will call trace_hardirqs_off(), and this may change register "a1". The changed register "a1" as argument will be send to do_fpe() and do_msa_fpe(). Signed-off-by: YuanJunQing <yuanjunqing66@163.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-27 14:11:30 +08:00
_cfcmsa a1, MSA_CSR
MIPS: clear MSACSR cause bits when handling MSA FP exception Much like for traditional scalar FP exceptions, the cause bits in the MSACSR register need to be cleared following an MSA FP exception. Without doing so the exception will simply be raised again whenever the kernel restores MSACSR from a tasks saved context, leading to undesirable spurious exceptions. Clear the cause bits from the handle_msa_fpe function, mirroring the way handle_fpe clears the cause bits in FCSR. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-01-30 20:09:34 +08:00
.endm
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.macro __build_clear_ade
MFC0 t0, CP0_BADVADDR
PTR_S t0, PT_BVADDR(sp)
KMODE
.endm
.macro __BUILD_silent exception
.endm
MIPS: asm: Rename some macros to avoid build errors Use ASM_ prefix to rename some macros (PANIC and PRINT), in order to avoid build errors (all users are updated as well): 1, PANIC conflicts with drivers/scsi/smartpqi/smartpqi_init.c 2, PRINT conflicts with net/netfilter/nf_conntrack_h323_asn1.c and net/ mac80211/debugfs_sta.c Fixes: d339cd02b888eb8 ("MIPS: Move unaligned load/store helpers to inst.h") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-07 17:49:18 +08:00
/* Gas tries to parse the ASM_PRINT argument as a string containing
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
string escapes and emits bogus warnings if it believes to
recognize an unknown escape code. So make the arguments
start with an n and gas will believe \n is ok ... */
MIPS: Whitespace cleanup. Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-01-22 19:59:30 +08:00
.macro __BUILD_verbose nexception
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
LONG_L a1, PT_EPC(sp)
[PATCH] mips: fix build warnings This patch has fixed the following warnings. arch/mips/kernel/genex.S:250:5: warning: "CONFIG_64BIT" is not defined arch/mips/math-emu/cp1emu.c:1128:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:1206:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:1270:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:323:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:808:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:953:5: warning: "__mips64" is not defined arch/mips/mm/tlbex.c:519:5: warning: "CONFIG_64BIT" is not defined include/asm/reg.h:73:5: warning: "CONFIG_64BIT" is not defined Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 06:56:22 +08:00
#ifdef CONFIG_32BIT
MIPS: asm: Rename some macros to avoid build errors Use ASM_ prefix to rename some macros (PANIC and PRINT), in order to avoid build errors (all users are updated as well): 1, PANIC conflicts with drivers/scsi/smartpqi/smartpqi_init.c 2, PRINT conflicts with net/netfilter/nf_conntrack_h323_asn1.c and net/ mac80211/debugfs_sta.c Fixes: d339cd02b888eb8 ("MIPS: Move unaligned load/store helpers to inst.h") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-07 17:49:18 +08:00
ASM_PRINT("Got \nexception at %08lx\012")
[PATCH] mips: nuke trailing whitespace Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 06:56:17 +08:00
#endif
[PATCH] mips: fix build warnings This patch has fixed the following warnings. arch/mips/kernel/genex.S:250:5: warning: "CONFIG_64BIT" is not defined arch/mips/math-emu/cp1emu.c:1128:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:1206:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:1270:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:323:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:808:5: warning: "__mips64" is not defined arch/mips/math-emu/cp1emu.c:953:5: warning: "__mips64" is not defined arch/mips/mm/tlbex.c:519:5: warning: "CONFIG_64BIT" is not defined include/asm/reg.h:73:5: warning: "CONFIG_64BIT" is not defined Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 06:56:22 +08:00
#ifdef CONFIG_64BIT
MIPS: asm: Rename some macros to avoid build errors Use ASM_ prefix to rename some macros (PANIC and PRINT), in order to avoid build errors (all users are updated as well): 1, PANIC conflicts with drivers/scsi/smartpqi/smartpqi_init.c 2, PRINT conflicts with net/netfilter/nf_conntrack_h323_asn1.c and net/ mac80211/debugfs_sta.c Fixes: d339cd02b888eb8 ("MIPS: Move unaligned load/store helpers to inst.h") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-07 17:49:18 +08:00
ASM_PRINT("Got \nexception at %016lx\012")
[PATCH] mips: nuke trailing whitespace Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 06:56:17 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.endm
.macro __BUILD_count exception
LONG_L t0,exception_count_\exception
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
LONG_ADDIU t0, 1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
LONG_S t0,exception_count_\exception
.comm exception_count\exception, 8, 8
.endm
.macro __BUILD_HANDLER exception handler clear verbose ext
.align 5
NESTED(handle_\exception, PT_SIZE, sp)
MIPS: Add DWARF unwinding to assembly This will allow kdump dumps to work correclty with MIPS and future DWARF unwinding of the stack to give accurate tracebacks. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16990/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-11 02:27:39 +08:00
.cfi_signal_frame
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.set noat
SAVE_ALL
FEXPORT(handle_\exception\ext)
MIPS: Fix LLVM build issue. Matthew Fortune <Matthew.Fortune@imgtec.com> reports: The genex.S file appears to mix the case of a macro between its definition and use. A cut down example of this is below. The macro __build_clear_none has lower case 'build' but ends up being instantiated with upper case BUILD. Can this be fixed on master. It has been picked up by the LLVM integrated assembler which is currently case sensitive. We are likely to fix the assembler as well but the code is currently inconsistent in the kernel. .macro __build_clear_none .endm .macro __BUILD_HANDLER exception handler clear verbose ext .align 5 .globl handle_\exception; .align 2; .type handle_\exception, @function; .ent handle_\exception, 0; handle_\exception: .frame $29, 184, $29 .set noat .globl handle_\exception\ext; .type handle_\exception\ext, @function; handle_\exception\ext: __BUILD_clear_\clear .endm .macro BUILD_HANDLER exception handler clear verbose __BUILD_HANDLER \exception \handler \clear \verbose _int .endm BUILD_HANDLER ftlb ftlb none silent Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Matthew Fortune <Matthew.Fortune@imgtec.com>
2015-08-18 17:25:50 +08:00
__build_clear_\clear
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.set at
__BUILD_\verbose \exception
move a0, sp
MIPS: Add DWARF unwinding to assembly This will allow kdump dumps to work correclty with MIPS and future DWARF unwinding of the stack to give accurate tracebacks. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16990/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-11 02:27:39 +08:00
jal do_\handler
j ret_from_exception
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
END(handle_\exception)
.endm
.macro BUILD_HANDLER exception handler clear verbose
MIPS: Whitespace cleanup. Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-01-22 19:59:30 +08:00
__BUILD_HANDLER \exception \handler \clear \verbose _int
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.endm
BUILD_HANDLER adel ade ade silent /* #4 */
BUILD_HANDLER ades ade ade silent /* #5 */
BUILD_HANDLER ibe be cli silent /* #6 */
BUILD_HANDLER dbe be cli silent /* #7 */
BUILD_HANDLER bp bp sti silent /* #9 */
BUILD_HANDLER ri ri sti silent /* #10 */
BUILD_HANDLER cpu cpu sti silent /* #11 */
BUILD_HANDLER ov ov sti silent /* #12 */
BUILD_HANDLER tr tr sti silent /* #13 */
MIPS: clear MSACSR cause bits when handling MSA FP exception Much like for traditional scalar FP exceptions, the cause bits in the MSACSR register need to be cleared following an MSA FP exception. Without doing so the exception will simply be raised again whenever the kernel restores MSACSR from a tasks saved context, leading to undesirable spurious exceptions. Clear the cause bits from the handle_msa_fpe function, mirroring the way handle_fpe clears the cause bits in FCSR. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-01-30 20:09:34 +08:00
BUILD_HANDLER msa_fpe msa_fpe msa_fpe silent /* #14 */
MIPS: traps: Never enable FPU when CONFIG_MIPS_FP_SUPPORT=n When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so we'll never need to enable the FPU. Avoid doing so on a Co-Processor Unusable exception (do_cpu), and remove the Floating Point Exception handler (do_fpe) which should never be executed when the FPU is disabled. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21007/ Cc: linux-mips@linux-mips.org
2018-11-08 07:14:05 +08:00
#ifdef CONFIG_MIPS_FP_SUPPORT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
BUILD_HANDLER fpe fpe fpe silent /* #15 */
MIPS: traps: Never enable FPU when CONFIG_MIPS_FP_SUPPORT=n When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so we'll never need to enable the FPU. Avoid doing so on a Co-Processor Unusable exception (do_cpu), and remove the Floating Point Exception handler (do_fpe) which should never be executed when the FPU is disabled. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21007/ Cc: linux-mips@linux-mips.org
2018-11-08 07:14:05 +08:00
#endif
MIPS: Add support for FTLBs The Fixed Page Size TLB (FTLB) is a set-associative dual entry TLB. Its purpose is to reduce the number of TLB misses by increasing the effective TLB size and keep the implementation complexity to minimum levels. A supported core can have both VTLB and FTLB. Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6139/
2013-11-15 00:12:31 +08:00
BUILD_HANDLER ftlb ftlb none silent /* #16 */
MIPS: Basic MSA context switching support This patch adds support for context switching the MSA vector registers. These 128 bit vector registers are aliased with the FP registers - an FP register accesses the least significant bits of the vector register with which it is aliased (ie. the register with the same index). Due to both this & the requirement that the scalar FPU must be 64-bit (FR=1) if enabled at the same time as MSA the kernel will enable MSA & scalar FP at the same time for tasks which use MSA. If we restore the MSA vector context then we might as well enable the scalar FPU since the reason it was left disabled was to allow for lazy FP context restoring - but we just restored the FP context as it's a subset of the vector context. If we restore the FP context and have previously used MSA then we have to restore the whole vector context anyway (see comment in enable_restore_fp_context for details) so similarly we might as well enable MSA. Thus if a task does not use MSA then it will continue to behave as without this patch - the scalar FP context will be saved & restored as usual. But if a task executes an MSA instruction then it will save & restore the vector context forever more. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6431/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-27 23:23:11 +08:00
BUILD_HANDLER msa msa sti silent /* #21 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
BUILD_HANDLER mdmx mdmx sti silent /* #22 */
MIPS: Whitespace cleanup. Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-01-22 19:59:30 +08:00
#ifdef CONFIG_HARDWARE_WATCHPOINTS
MIPS: Read watch registers with interrupts disabled. If a context switch occurred between the watch exception and reading the watch registers, it would be possible for the new process to corrupt their state. Enabling interrupts only after the watch registers are read avoids this race. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-06 07:29:58 +08:00
/*
* For watch, interrupts will be enabled after the watch
* registers are read.
*/
BUILD_HANDLER watch watch cli silent /* #23 */
MIPS: Watch exception handling for HARDWARE_WATCHPOINTS. Here we hook up the watch exception handler so that it sends SIGTRAP when the hardware watch registers are triggered. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-23 15:08:45 +08:00
#else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
BUILD_HANDLER watch watch sti verbose /* #23 */
MIPS: Watch exception handling for HARDWARE_WATCHPOINTS. Here we hook up the watch exception handler so that it sends SIGTRAP when the hardware watch registers are triggered. Signed-off-by: David Daney <ddaney@avtrex.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-23 15:08:45 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
BUILD_HANDLER mcheck mcheck cli verbose /* #24 */
[MIPS] Less noise on multithreading exceptions. Make the MT handler silent and output the MT exception type at debug priority. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-30 21:19:45 +08:00
BUILD_HANDLER mt mt sti silent /* #25 */
Support the MIPS32 / MIPS64 DSP ASE. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-05-31 19:49:19 +08:00
BUILD_HANDLER dsp dsp sti silent /* #26 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
BUILD_HANDLER reserved reserved sti verbose /* others */
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
.align 5
MIPS: Check TLB before handle_ri_rdhwr() for Loongson-3 Loongson-3's micro TLB (ITLB) is not strictly a subset of JTLB. That means: when a JTLB entry is replaced by hardware, there may be an old valid entry exists in ITLB. So, a TLB miss exception may occur while handle_ri_rdhwr() is running because it try to access EPC's content. However, handle_ri_rdhwr() doesn't clear EXL, which makes a TLB Refill exception be treated as a TLB Invalid exception and tlbp may fail. In this case, if FTLB (which is usually set-associative instead of set- associative) is enabled, a tlbp failure will cause an invalid tlbwi, which will hang the whole system. This patch rename handle_ri_rdhwr_vivt to handle_ri_rdhwr_tlbp and use it for Loongson-3. It try to solve the same problem described as below, but more straightforwards. https://patchwork.linux-mips.org/patch/12591/ I think Loongson-2 has the same problem, but it has no FTLB, so we just keep it as is. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Rui Wang <wangr@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15753/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-03-16 21:00:26 +08:00
LEAF(handle_ri_rdhwr_tlbp)
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
.set push
.set noat
.set noreorder
/* check if TLB contains a entry for EPC */
MFC0 k1, CP0_ENTRYHI
MIPS: Support extended ASIDs Add support for extended ASIDs as determined by the Config4.AE bit. Since the only supported CPUs known to implement this are Netlogic XLP and MIPS I6400, select this variable ASID support based upon CONFIG_CPU_XLP and CONFIG_CPU_MIPSR6. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Jayachandran C. <jchandra@broadcom.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13211/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-06 21:36:24 +08:00
andi k1, MIPS_ENTRYHI_ASID | MIPS_ENTRYHI_ASIDX
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
MFC0 k0, CP0_EPC
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
PTR_SRL k0, _PAGE_SHIFT + 1
PTR_SLL k0, _PAGE_SHIFT + 1
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
or k1, k0
MTC0 k1, CP0_ENTRYHI
mtc0_tlbw_hazard
tlbp
tlb_probe_hazard
mfc0 k1, CP0_INDEX
.set pop
bltz k1, handle_ri /* slow path */
/* fall thru */
MIPS: Check TLB before handle_ri_rdhwr() for Loongson-3 Loongson-3's micro TLB (ITLB) is not strictly a subset of JTLB. That means: when a JTLB entry is replaced by hardware, there may be an old valid entry exists in ITLB. So, a TLB miss exception may occur while handle_ri_rdhwr() is running because it try to access EPC's content. However, handle_ri_rdhwr() doesn't clear EXL, which makes a TLB Refill exception be treated as a TLB Invalid exception and tlbp may fail. In this case, if FTLB (which is usually set-associative instead of set- associative) is enabled, a tlbp failure will cause an invalid tlbwi, which will hang the whole system. This patch rename handle_ri_rdhwr_vivt to handle_ri_rdhwr_tlbp and use it for Loongson-3. It try to solve the same problem described as below, but more straightforwards. https://patchwork.linux-mips.org/patch/12591/ I think Loongson-2 has the same problem, but it has no FTLB, so we just keep it as is. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Rui Wang <wangr@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15753/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-03-16 21:00:26 +08:00
END(handle_ri_rdhwr_tlbp)
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
LEAF(handle_ri_rdhwr)
.set push
.set noat
.set noreorder
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
/* MIPS32: 0x7c03e83b: rdhwr v1,$29 */
/* microMIPS: 0x007d6b3c: rdhwr v1,$29 */
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
MFC0 k1, CP0_EPC
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
#if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_MIPS32_R2) || defined(CONFIG_CPU_MIPS64_R2)
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
and k0, k1, 1
beqz k0, 1f
xor k1, k0
lhu k0, (k1)
lhu k1, 2(k1)
ins k1, k0, 16, 16
lui k0, 0x007d
b docheck
ori k0, 0x6b3c
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
1:
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
lui k0, 0x7c03
lw k1, (k1)
ori k0, 0xe83b
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
#else
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
andi k0, k1, 1
bnez k0, handle_ri
lui k0, 0x7c03
lw k1, (k1)
ori k0, 0xe83b
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
#endif
MIPS: genex: Indent delay slots & clean whitespace Various branches and jumps in noreorder parts of genex.S don't have their delay slot instructions indented conventionally with the extra space. Fix these, as well as various other inconsistent whitespace problems in this file, such as spaces used after some opcodes instead of a tab. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30 00:29:29 +08:00
.set reorder
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
docheck:
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
bne k0, k1, handle_ri /* if not ours */
MIPS: microMIPS: Add support for exception handling. All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 01:15:55 +08:00
isrdhwr:
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
/* The insn is rdhwr. No need to check CAUSE.BD here. */
get_saved_sp /* k1 := current_thread_info */
.set noreorder
MFC0 k0, CP0_EPC
#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
ori k1, _THREAD_MASK
xori k1, _THREAD_MASK
LONG_L v1, TI_TP_VALUE(k1)
LONG_ADDIU k0, 4
jr k0
rfe
#else
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 19:43:25 +08:00
#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
LONG_ADDIU k0, 4 /* stall on $k0 */
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 19:43:25 +08:00
#else
.set at=v1
LONG_ADDIU k0, 4
.set noat
#endif
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
MTC0 k0, CP0_EPC
/* I hope three instructions between MTC0 and ERET are enough... */
ori k1, _THREAD_MASK
xori k1, _THREAD_MASK
LONG_L v1, TI_TP_VALUE(k1)
MIPS: Avoid using .set mips0 to restore ISA We currently have 2 commonly used methods for switching ISA within assembly code, then restoring the original ISA. 1) Using a pair of .set push & .set pop directives. For example: .set push .set mips32r2 <some_insn> .set pop 2) Using .set mips0 to restore the ISA originally specified on the command line. For example: .set mips32r2 <some_insn> .set mips0 Unfortunately method 2 does not work with nanoMIPS toolchains, where the assembler rejects the .set mips0 directive like so: Error: cannot change ISA from nanoMIPS to mips0 In preparation for supporting nanoMIPS builds, switch all instances of method 2 in generic non-platform-specific code to use push & pop as in method 1 instead. The .set push & .set pop is arguably cleaner anyway, and if nothing else it's good to consistently use one method. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21037/ Cc: linux-mips@linux-mips.org
2018-11-09 04:14:38 +08:00
.set push
MIPS: Fix gigaton of warning building with microMIPS. With binutils 2.24 the attempt to switch with microMIPS mode to MIPS III mode through .set mips3 results in *lots* of warnings like {standard input}: Assembler messages: {standard input}:397: Warning: the 64-bit MIPS architecture does not support the `smartmips' extension during a kernel build. Fixed by using .set arch=r4000 instead. This breaks support for building the kernel with binutils 2.13 which was supported for 32 bit kernels only anyway and 2.14 which was a bad vintage for MIPS anyway. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-30 19:20:10 +08:00
.set arch=r4000
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
eret
MIPS: Avoid using .set mips0 to restore ISA We currently have 2 commonly used methods for switching ISA within assembly code, then restoring the original ISA. 1) Using a pair of .set push & .set pop directives. For example: .set push .set mips32r2 <some_insn> .set pop 2) Using .set mips0 to restore the ISA originally specified on the command line. For example: .set mips32r2 <some_insn> .set mips0 Unfortunately method 2 does not work with nanoMIPS toolchains, where the assembler rejects the .set mips0 directive like so: Error: cannot change ISA from nanoMIPS to mips0 In preparation for supporting nanoMIPS builds, switch all instances of method 2 in generic non-platform-specific code to use push & pop as in method 1 instead. The .set push & .set pop is arguably cleaner anyway, and if nothing else it's good to consistently use one method. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21037/ Cc: linux-mips@linux-mips.org
2018-11-09 04:14:38 +08:00
.set pop
[MIPS] Fast path for rdhwr emulation for TLS Add special short path for emulationg RDHWR which is used to support TLS. Add an extra prologue for cpu_has_vtag_icache case. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-11 16:50:29 +08:00
#endif
.set pop
END(handle_ri_rdhwr)
MIPS: r4k-bugs64: Limit R4k bug checks to affected systems Only build the checks for R4k errata workarounds if we expect that the kernel might actually run on a system with an R4k CPU - ie. CONFIG_SYS_HAS_CPU_R4X00=y & we're targeting a pre-MIPSr1 ISA revision. Rename cpu-bugs64.c to r4k-bugs64.c to indicate the fact that the code is specific to R4k CPUs. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-10-02 07:04:32 +08:00
#ifdef CONFIG_CPU_R4X00_BUGS64
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* A temporary overflow handler used by check_daddi(). */
__INIT
BUILD_HANDLER daddi_ov daddi_ov none silent /* #12 */
#endif