openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm/mach-omap2/clockdomain.h

213 lines
8.1 KiB
C
Raw Normal View History

ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
/*
[ARM] OMAP2/3 clockdomains: combine pwrdm, pwrdm_name into union in struct clockdomain struct clockdomain contains a struct powerdomain *pwrdm and const char *pwrdm_name. The pwrdm_name is only used at initialization to look up the appropriate pwrdm pointer. Combining these into a union saves about 100 bytes on 3430SDP. This patch should not cause any change in kernel function. Updated to gracefully handle autodeps that contain invalid powerdomains, per Russell King's review comments. Boot-tested on BeagleBoard ES2.1. linux-omap source commit is 718fc6cd4db902aa2242a736cc3feb8744a4c71a. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-03 17:10:03 +08:00
* arch/arm/plat-omap/include/mach/clockdomain.h
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
*
* OMAP2/3 clockdomain framework functions
*
* Copyright (C) 2008 Texas Instruments, Inc.
OMAP2+: clockdomain: add flag that will block autodeps from being added for a clockdomain Add a new clockdomain flag, CLKDM_NO_AUTODEPS, which, when marked on a clockdomain, will prevent "autodeps" from being associated with the clockdomain. ("Autodeps" are sleep dependencies and wakeup dependencies from/to processor modules that are automatically added to a clockdomain when it is in hardware-supervised idle mode. They are deprecated -- a relic from the old CDP trees -- but are still in use for OMAP3.) Also, prevent the hwmod code from adding or removing initiator dependencies for clockdomains with this flag set. This patch should allow others to test which clockdomains actually still need autodeps. Thanks to Kevin Hilman <khilman@ti.com> for noting that the original version should also modify the hwmod code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-10 18:50:09 +08:00
* Copyright (C) 2008-2011 Nokia Corporation
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
*
OMAP2+: clockdomains: move clockdomain static data to .c files Static data should be declared in .c files, not .h files. It should be possible to #include .h files at any point without creating multiple copies of the same data. We converted the clock data to .c files some time ago. This patch does the same for the clockdomain data. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:01:20 +08:00
* Paul Walmsley
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
OMAP2+: clockdomain: move header file from plat-omap to mach-omap2 The OMAP clockdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/clockdomain.h to mach-omap2/clockdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access clockdomain code and data directly. DSPBridge also uses the clockdomain headers for some reason, so, modify it also. The DSPBridge code should not be including the clockdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 12:05:15 +08:00
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAIN_H
#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAIN_H
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
OMAP2+: clockdomains: move clockdomain static data to .c files Static data should be declared in .c files, not .h files. It should be possible to #include .h files at any point without creating multiple copies of the same data. We converted the clock data to .c files some time ago. This patch does the same for the clockdomain data. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:01:20 +08:00
#include <linux/init.h>
OMAP2+: clockdomain: Add per clkdm lock to prevent concurrent state programming Since the clkdm state programming is now done from within the hwmod framework (which uses a per-hwmod lock) instead of the being done from the clock framework (which used a global lock), there is now a need to have per-clkdm locking to prevent races between different hwmods/modules belonging to the same clock domain concurrently programming the clkdm state. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10 19:56:55 +08:00
#include <linux/spinlock.h>
OMAP2+: clockdomains: move clockdomain static data to .c files Static data should be declared in .c files, not .h files. It should be possible to #include .h files at any point without creating multiple copies of the same data. We converted the clock data to .c files some time ago. This patch does the same for the clockdomain data. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:01:20 +08:00
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 The OMAP powerdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/powerdomain.h to mach-omap2/powerdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access powerdomain code and data directly. As part of this process, remove the references to powerdomain data from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap. Change the DSPBridge code to point to the new location for the powerdomain headers. The DSPBridge code should not be including the powerdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com>
2010-12-22 12:05:16 +08:00
#include "powerdomain.h"
omap: headers: Move remaining headers from include/mach to include/plat Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-21 00:40:47 +08:00
#include <plat/clock.h>
OMAP2+: clockdomain: Add 2 APIs to control clockdomain from hwmod framework Duplicate the existing API for clockdomain enable from clock to enable a clock domain from hwmod framework. This will be needed when the hwmod framework will move from the current clock centric approach to the module based approach. These APIs are returning 0 for the moment for OMAP2 and OMAP3 until their hwmods are updated with the clksm attribute. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10 19:56:54 +08:00
#include <plat/omap_hwmod.h>
omap: headers: Move remaining headers from include/mach to include/plat Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-21 00:40:47 +08:00
#include <plat/cpu.h>
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
OMAP2+: clockdomain: add flag that will block autodeps from being added for a clockdomain Add a new clockdomain flag, CLKDM_NO_AUTODEPS, which, when marked on a clockdomain, will prevent "autodeps" from being associated with the clockdomain. ("Autodeps" are sleep dependencies and wakeup dependencies from/to processor modules that are automatically added to a clockdomain when it is in hardware-supervised idle mode. They are deprecated -- a relic from the old CDP trees -- but are still in use for OMAP3.) Also, prevent the hwmod code from adding or removing initiator dependencies for clockdomains with this flag set. This patch should allow others to test which clockdomains actually still need autodeps. Thanks to Kevin Hilman <khilman@ti.com> for noting that the original version should also modify the hwmod code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-10 18:50:09 +08:00
/*
* Clockdomain flags
*
* XXX Document CLKDM_CAN_* flags
*
* CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this
* clockdomain. (Currently, this applies to OMAP3 clockdomains only.)
*/
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
#define CLKDM_CAN_FORCE_SLEEP (1 << 0)
#define CLKDM_CAN_FORCE_WAKEUP (1 << 1)
#define CLKDM_CAN_ENABLE_AUTO (1 << 2)
#define CLKDM_CAN_DISABLE_AUTO (1 << 3)
OMAP2+: clockdomain: add flag that will block autodeps from being added for a clockdomain Add a new clockdomain flag, CLKDM_NO_AUTODEPS, which, when marked on a clockdomain, will prevent "autodeps" from being associated with the clockdomain. ("Autodeps" are sleep dependencies and wakeup dependencies from/to processor modules that are automatically added to a clockdomain when it is in hardware-supervised idle mode. They are deprecated -- a relic from the old CDP trees -- but are still in use for OMAP3.) Also, prevent the hwmod code from adding or removing initiator dependencies for clockdomains with this flag set. This patch should allow others to test which clockdomains actually still need autodeps. Thanks to Kevin Hilman <khilman@ti.com> for noting that the original version should also modify the hwmod code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-10 18:50:09 +08:00
#define CLKDM_NO_AUTODEPS (1 << 4)
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
#define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
#define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
#define CLKDM_CAN_HWSUP_SWSUP (CLKDM_CAN_SWSUP | CLKDM_CAN_HWSUP)
OMAP clockdomain/powerdomain: improve documentation This patch only affects documentation; no functional changes are included. Clean up comments in the current clockdomain, powerdomain code and header files. This mostly involves conversion to kerneldoc format, although some clarifications are also included. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-27 11:13:02 +08:00
/**
* struct clkdm_autodep - clkdm deps to add when entering/exiting hwsup mode
* @clkdm: clockdomain to add wkdep+sleepdep on - set name member only
*
* A clockdomain that should have wkdeps and sleepdeps added when a
* clockdomain should stay active in hwsup mode; and conversely,
* removed when the clockdomain should be allowed to go inactive in
* hwsup mode.
*
* Autodeps are deprecated and should be removed after
* omap_hwmod-based fine-grained module idle control is added.
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
*/
OMAP2/3 clkdm/pwrdm: move wkdep/sleepdep handling from pwrdm to clkdm Move clockdomain wakeup dependency and sleep dependency data structures from the powerdomain layer to the clockdomain layer, where they belong. These dependencies were originally placed in the powerdomain layer due to unclear documentation; however, it is clear now that these dependencies are between clockdomains. For OMAP2/3, this is not such a big problem, but for OMAP4 this needs to be fixed. Thanks to Benoît Cousson <b-cousson@ti.com> for his advice on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2010-01-27 11:12:59 +08:00
struct clkdm_autodep {
[ARM] OMAP2/3 clockdomains: combine pwrdm, pwrdm_name into union in struct clockdomain struct clockdomain contains a struct powerdomain *pwrdm and const char *pwrdm_name. The pwrdm_name is only used at initialization to look up the appropriate pwrdm pointer. Combining these into a union saves about 100 bytes on 3430SDP. This patch should not cause any change in kernel function. Updated to gracefully handle autodeps that contain invalid powerdomains, per Russell King's review comments. Boot-tested on BeagleBoard ES2.1. linux-omap source commit is 718fc6cd4db902aa2242a736cc3feb8744a4c71a. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-03 17:10:03 +08:00
union {
const char *name;
OMAP2/3 clkdm/pwrdm: move wkdep/sleepdep handling from pwrdm to clkdm Move clockdomain wakeup dependency and sleep dependency data structures from the powerdomain layer to the clockdomain layer, where they belong. These dependencies were originally placed in the powerdomain layer due to unclear documentation; however, it is clear now that these dependencies are between clockdomains. For OMAP2/3, this is not such a big problem, but for OMAP4 this needs to be fixed. Thanks to Benoît Cousson <b-cousson@ti.com> for his advice on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2010-01-27 11:12:59 +08:00
struct clockdomain *ptr;
} clkdm;
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
};
OMAP clockdomain/powerdomain: improve documentation This patch only affects documentation; no functional changes are included. Clean up comments in the current clockdomain, powerdomain code and header files. This mostly involves conversion to kerneldoc format, although some clarifications are also included. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-27 11:13:02 +08:00
/**
* struct clkdm_dep - encode dependencies between clockdomains
* @clkdm_name: clockdomain name
* @clkdm: pointer to the struct clockdomain of @clkdm_name
* @wkdep_usecount: Number of wakeup dependencies causing this clkdm to wake
* @sleepdep_usecount: Number of sleep deps that could prevent clkdm from idle
*
* Statically defined. @clkdm is resolved from @clkdm_name at runtime and
* should not be pre-initialized.
*
* XXX Should also include hardware (fixed) dependencies.
*/
OMAP2/3 clkdm/pwrdm: move wkdep/sleepdep handling from pwrdm to clkdm Move clockdomain wakeup dependency and sleep dependency data structures from the powerdomain layer to the clockdomain layer, where they belong. These dependencies were originally placed in the powerdomain layer due to unclear documentation; however, it is clear now that these dependencies are between clockdomains. For OMAP2/3, this is not such a big problem, but for OMAP4 this needs to be fixed. Thanks to Benoît Cousson <b-cousson@ti.com> for his advice on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2010-01-27 11:12:59 +08:00
struct clkdm_dep {
const char *clkdm_name;
struct clockdomain *clkdm;
OMAP clockdomains: add usecounting for wakeup and sleep dependencies Add usecounting for wakeup and sleep dependencies. In the current situation, if several functions add dependencies on the same clockdomains, when the first dependency removal function is called, the dependency will be incorrectly removed from the hardware. Add clkdm_clear_all_wkdeps() and clkdm_clear_all_sleepdeps(), which provide a fast and usecounting-consistent way to clear all hardware clockdomain dependencies, since accesses to these registers can be quite slow. pm{2,3}4xx.c has been updated to use these new functions. The original version of this patch did not touch these files, which previously wrote directly to the wkdep registers, and thus confused the usecounting code. This problem was found by Kevin Hilman <khilman@deeprootsystems.com>. N.B.: This patch introduces one significant functional difference over the previous pm34xx.c code: sleepdeps are now cleared during clockdomain initialization, whereas previously they were left untouched. This has been tested by Kevin and confirmed to work. The original version of this patch also did not take into consideration that some clockdomains do not have sleep or wakeup dependency sources, which caused NULL pointer dereferences. This problem was debugged and fixed by Kevin Hilman <khilman@deeprootsystems.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jouni Högander <jouni.hogander@nokia.com>
2010-01-27 11:13:01 +08:00
atomic_t wkdep_usecount;
atomic_t sleepdep_usecount;
OMAP2/3 clkdm/pwrdm: move wkdep/sleepdep handling from pwrdm to clkdm Move clockdomain wakeup dependency and sleep dependency data structures from the powerdomain layer to the clockdomain layer, where they belong. These dependencies were originally placed in the powerdomain layer due to unclear documentation; however, it is clear now that these dependencies are between clockdomains. For OMAP2/3, this is not such a big problem, but for OMAP4 this needs to be fixed. Thanks to Benoît Cousson <b-cousson@ti.com> for his advice on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2010-01-27 11:12:59 +08:00
};
OMAP2+: clockdomain: add clkdm_in_hwsup() Add a new function, clkdm_in_hwsup(), that returns true if a clockdomain is configured for hardware-supervised idle. It does not actually read the hardware; rather, it checks an internal flag in the struct clockdomain, which is changed when the clockdomain is switched in and out of hardware-supervised idle. This should be safe, since all changes to the idle mode should pass through the clockdomain code. Based on a set of patches by Rajendra Nayak <rnayak@ti.com> which do the same thing by checking the hardware bits. This approach should be faster and more compact. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Todd Poynor <toddpoynor@google.com> Cc: Benoît Cousson <b-cousson@ti.com>
2011-07-10 19:56:54 +08:00
/* Possible flags for struct clockdomain._flags */
#define _CLKDM_FLAG_HWSUP_ENABLED BIT(0)
OMAP clockdomain/powerdomain: improve documentation This patch only affects documentation; no functional changes are included. Clean up comments in the current clockdomain, powerdomain code and header files. This mostly involves conversion to kerneldoc format, although some clarifications are also included. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-27 11:13:02 +08:00
/**
* struct clockdomain - OMAP clockdomain
* @name: clockdomain name
* @pwrdm: powerdomain containing this clockdomain
* @clktrctrl_reg: CLKSTCTRL reg for the given clock domain
* @clktrctrl_mask: CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg
* @flags: Clockdomain capability flags
OMAP2+: clockdomain: add clkdm_in_hwsup() Add a new function, clkdm_in_hwsup(), that returns true if a clockdomain is configured for hardware-supervised idle. It does not actually read the hardware; rather, it checks an internal flag in the struct clockdomain, which is changed when the clockdomain is switched in and out of hardware-supervised idle. This should be safe, since all changes to the idle mode should pass through the clockdomain code. Based on a set of patches by Rajendra Nayak <rnayak@ti.com> which do the same thing by checking the hardware bits. This approach should be faster and more compact. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Todd Poynor <toddpoynor@google.com> Cc: Benoît Cousson <b-cousson@ti.com>
2011-07-10 19:56:54 +08:00
* @_flags: Flags for use only by internal clockdomain code
OMAP clockdomain/powerdomain: improve documentation This patch only affects documentation; no functional changes are included. Clean up comments in the current clockdomain, powerdomain code and header files. This mostly involves conversion to kerneldoc format, although some clarifications are also included. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-27 11:13:02 +08:00
* @dep_bit: Bit shift of this clockdomain's PM_WKDEP/CM_SLEEPDEP bit
OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support Add PRCM partition, CM instance register address offset, and clockdomain register address offset to each OMAP4 struct clockdomain record. Add OMAP4 clockdomain code to use this new data to access registers properly. While here, clean up some nearby clockdomain code to allocate auto variables in my recollection of Linus's preferred style. The autogeneration scripts have been updated. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 12:05:15 +08:00
* @prcm_partition: (OMAP4 only) PRCM partition ID for this clkdm's registers
* @cm_inst: (OMAP4 only) CM instance register offset
* @clkdm_offs: (OMAP4 only) CM clockdomain register offset
OMAP clockdomain/powerdomain: improve documentation This patch only affects documentation; no functional changes are included. Clean up comments in the current clockdomain, powerdomain code and header files. This mostly involves conversion to kerneldoc format, although some clarifications are also included. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-27 11:13:02 +08:00
* @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up
* @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact
* @usecount: Usecount tracking
* @node: list_head to link all clockdomains together
OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support Add PRCM partition, CM instance register address offset, and clockdomain register address offset to each OMAP4 struct clockdomain record. Add OMAP4 clockdomain code to use this new data to access registers properly. While here, clean up some nearby clockdomain code to allocate auto variables in my recollection of Linus's preferred style. The autogeneration scripts have been updated. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 12:05:15 +08:00
*
* @prcm_partition should be a macro from mach-omap2/prcm44xx.h (OMAP4 only)
* @cm_inst should be a macro ending in _INST from the OMAP4 CM instance
* definitions (OMAP4 only)
* @clkdm_offs should be a macro ending in _CDOFFS from the OMAP4 CM instance
* definitions (OMAP4 only)
OMAP clockdomain/powerdomain: improve documentation This patch only affects documentation; no functional changes are included. Clean up comments in the current clockdomain, powerdomain code and header files. This mostly involves conversion to kerneldoc format, although some clarifications are also included. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-27 11:13:02 +08:00
*/
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
struct clockdomain {
const char *name;
[ARM] OMAP2/3 clockdomains: combine pwrdm, pwrdm_name into union in struct clockdomain struct clockdomain contains a struct powerdomain *pwrdm and const char *pwrdm_name. The pwrdm_name is only used at initialization to look up the appropriate pwrdm pointer. Combining these into a union saves about 100 bytes on 3430SDP. This patch should not cause any change in kernel function. Updated to gracefully handle autodeps that contain invalid powerdomains, per Russell King's review comments. Boot-tested on BeagleBoard ES2.1. linux-omap source commit is 718fc6cd4db902aa2242a736cc3feb8744a4c71a. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-03 17:10:03 +08:00
union {
const char *name;
struct powerdomain *ptr;
} pwrdm;
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
const u16 clktrctrl_mask;
const u8 flags;
OMAP2+: clockdomain: add clkdm_in_hwsup() Add a new function, clkdm_in_hwsup(), that returns true if a clockdomain is configured for hardware-supervised idle. It does not actually read the hardware; rather, it checks an internal flag in the struct clockdomain, which is changed when the clockdomain is switched in and out of hardware-supervised idle. This should be safe, since all changes to the idle mode should pass through the clockdomain code. Based on a set of patches by Rajendra Nayak <rnayak@ti.com> which do the same thing by checking the hardware bits. This approach should be faster and more compact. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Todd Poynor <toddpoynor@google.com> Cc: Benoît Cousson <b-cousson@ti.com>
2011-07-10 19:56:54 +08:00
u8 _flags;
OMAP2/3 clkdm/pwrdm: move wkdep/sleepdep handling from pwrdm to clkdm Move clockdomain wakeup dependency and sleep dependency data structures from the powerdomain layer to the clockdomain layer, where they belong. These dependencies were originally placed in the powerdomain layer due to unclear documentation; however, it is clear now that these dependencies are between clockdomains. For OMAP2/3, this is not such a big problem, but for OMAP4 this needs to be fixed. Thanks to Benoît Cousson <b-cousson@ti.com> for his advice on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2010-01-27 11:12:59 +08:00
const u8 dep_bit;
OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support Add PRCM partition, CM instance register address offset, and clockdomain register address offset to each OMAP4 struct clockdomain record. Add OMAP4 clockdomain code to use this new data to access registers properly. While here, clean up some nearby clockdomain code to allocate auto variables in my recollection of Linus's preferred style. The autogeneration scripts have been updated. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 12:05:15 +08:00
const u8 prcm_partition;
const s16 cm_inst;
const u16 clkdm_offs;
OMAP2/3 clkdm/pwrdm: move wkdep/sleepdep handling from pwrdm to clkdm Move clockdomain wakeup dependency and sleep dependency data structures from the powerdomain layer to the clockdomain layer, where they belong. These dependencies were originally placed in the powerdomain layer due to unclear documentation; however, it is clear now that these dependencies are between clockdomains. For OMAP2/3, this is not such a big problem, but for OMAP4 this needs to be fixed. Thanks to Benoît Cousson <b-cousson@ti.com> for his advice on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2010-01-27 11:12:59 +08:00
struct clkdm_dep *wkdep_srcs;
struct clkdm_dep *sleepdep_srcs;
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
atomic_t usecount;
struct list_head node;
OMAP2+: clockdomain: Add per clkdm lock to prevent concurrent state programming Since the clkdm state programming is now done from within the hwmod framework (which uses a per-hwmod lock) instead of the being done from the clock framework (which used a global lock), there is now a need to have per-clkdm locking to prevent races between different hwmods/modules belonging to the same clock domain concurrently programming the clkdm state. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10 19:56:55 +08:00
spinlock_t lock;
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
};
OMAP: clockdomain: Infrastructure to put arch specific code Put infrastructure in place, so arch specific func pointers can be hooked up to the platform-independent part of the framework. This is in preparation of splitting the clockdomain framework into platform-independent part (for all omaps) and platform-specific parts. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-26 07:06:47 +08:00
/**
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 09:57:33 +08:00
* struct clkdm_ops - Arch specific function implementations
OMAP: clockdomain: Infrastructure to put arch specific code Put infrastructure in place, so arch specific func pointers can be hooked up to the platform-independent part of the framework. This is in preparation of splitting the clockdomain framework into platform-independent part (for all omaps) and platform-specific parts. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-26 07:06:47 +08:00
* @clkdm_add_wkdep: Add a wakeup dependency between clk domains
* @clkdm_del_wkdep: Delete a wakeup dependency between clk domains
* @clkdm_read_wkdep: Read wakeup dependency state between clk domains
* @clkdm_clear_all_wkdeps: Remove all wakeup dependencies from the clk domain
* @clkdm_add_sleepdep: Add a sleep dependency between clk domains
* @clkdm_del_sleepdep: Delete a sleep dependency between clk domains
* @clkdm_read_sleepdep: Read sleep dependency state between clk domains
* @clkdm_clear_all_sleepdeps: Remove all sleep dependencies from the clk domain
* @clkdm_sleep: Force a clockdomain to sleep
* @clkdm_wakeup: Force a clockdomain to wakeup
* @clkdm_allow_idle: Enable hw supervised idle transitions for clock domain
* @clkdm_deny_idle: Disable hw supervised idle transitions for clock domain
* @clkdm_clk_enable: Put the clkdm in right state for a clock enable
* @clkdm_clk_disable: Put the clkdm in right state for a clock disable
*/
struct clkdm_ops {
int (*clkdm_add_wkdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
int (*clkdm_del_wkdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
int (*clkdm_read_wkdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
int (*clkdm_clear_all_wkdeps)(struct clockdomain *clkdm);
int (*clkdm_add_sleepdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
int (*clkdm_del_sleepdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
int (*clkdm_read_sleepdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
int (*clkdm_clear_all_sleepdeps)(struct clockdomain *clkdm);
int (*clkdm_sleep)(struct clockdomain *clkdm);
int (*clkdm_wakeup)(struct clockdomain *clkdm);
void (*clkdm_allow_idle)(struct clockdomain *clkdm);
void (*clkdm_deny_idle)(struct clockdomain *clkdm);
int (*clkdm_clk_enable)(struct clockdomain *clkdm);
int (*clkdm_clk_disable)(struct clockdomain *clkdm);
};
OMAP: clockdomain: split clkdm_init() In preparation for OMAP_CHIP() removal, split clkdm_init() into four functions. This allows some of them to be called multiple times: for example, clkdm_register_clkdms() can be called once to register clockdomains that are common to a group of SoCs, and once to register clockdomains that are specific to a single SoC. The appropriate order to call these functions - which is enforced by the code - is: 1. clkdm_register_platform_funcs() 2. clkdm_register_clkdms() (can be called multiple times) 3. clkdm_register_autodeps() (optional; deprecated) 4. clkdm_complete_init() Convert the OMAP2, 3, and 4 clockdomain init code to use these new functions. While here, improve documentation, and increase CodingStyle conformance by shortening some local variable names. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-09-15 06:01:20 +08:00
int clkdm_register_platform_funcs(struct clkdm_ops *co);
int clkdm_register_autodeps(struct clkdm_autodep *ia);
int clkdm_register_clkdms(struct clockdomain **c);
int clkdm_complete_init(void);
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
struct clockdomain *clkdm_lookup(const char *name);
OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each. Add some infrastructure to easily iterate over clock and power domains. Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-10-15 23:13:47 +08:00
int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
void *user);
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm);
OMAP2/3 clkdm/pwrdm: move wkdep/sleepdep handling from pwrdm to clkdm Move clockdomain wakeup dependency and sleep dependency data structures from the powerdomain layer to the clockdomain layer, where they belong. These dependencies were originally placed in the powerdomain layer due to unclear documentation; however, it is clear now that these dependencies are between clockdomains. For OMAP2/3, this is not such a big problem, but for OMAP4 this needs to be fixed. Thanks to Benoît Cousson <b-cousson@ti.com> for his advice on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2010-01-27 11:12:59 +08:00
int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
OMAP clockdomains: add usecounting for wakeup and sleep dependencies Add usecounting for wakeup and sleep dependencies. In the current situation, if several functions add dependencies on the same clockdomains, when the first dependency removal function is called, the dependency will be incorrectly removed from the hardware. Add clkdm_clear_all_wkdeps() and clkdm_clear_all_sleepdeps(), which provide a fast and usecounting-consistent way to clear all hardware clockdomain dependencies, since accesses to these registers can be quite slow. pm{2,3}4xx.c has been updated to use these new functions. The original version of this patch did not touch these files, which previously wrote directly to the wkdep registers, and thus confused the usecounting code. This problem was found by Kevin Hilman <khilman@deeprootsystems.com>. N.B.: This patch introduces one significant functional difference over the previous pm34xx.c code: sleepdeps are now cleared during clockdomain initialization, whereas previously they were left untouched. This has been tested by Kevin and confirmed to work. The original version of this patch also did not take into consideration that some clockdomains do not have sleep or wakeup dependency sources, which caused NULL pointer dereferences. This problem was debugged and fixed by Kevin Hilman <khilman@deeprootsystems.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jouni Högander <jouni.hogander@nokia.com>
2010-01-27 11:13:01 +08:00
int clkdm_clear_all_wkdeps(struct clockdomain *clkdm);
OMAP2/3 clkdm/pwrdm: move wkdep/sleepdep handling from pwrdm to clkdm Move clockdomain wakeup dependency and sleep dependency data structures from the powerdomain layer to the clockdomain layer, where they belong. These dependencies were originally placed in the powerdomain layer due to unclear documentation; however, it is clear now that these dependencies are between clockdomains. For OMAP2/3, this is not such a big problem, but for OMAP4 this needs to be fixed. Thanks to Benoît Cousson <b-cousson@ti.com> for his advice on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2010-01-27 11:12:59 +08:00
int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
OMAP clockdomains: add usecounting for wakeup and sleep dependencies Add usecounting for wakeup and sleep dependencies. In the current situation, if several functions add dependencies on the same clockdomains, when the first dependency removal function is called, the dependency will be incorrectly removed from the hardware. Add clkdm_clear_all_wkdeps() and clkdm_clear_all_sleepdeps(), which provide a fast and usecounting-consistent way to clear all hardware clockdomain dependencies, since accesses to these registers can be quite slow. pm{2,3}4xx.c has been updated to use these new functions. The original version of this patch did not touch these files, which previously wrote directly to the wkdep registers, and thus confused the usecounting code. This problem was found by Kevin Hilman <khilman@deeprootsystems.com>. N.B.: This patch introduces one significant functional difference over the previous pm34xx.c code: sleepdeps are now cleared during clockdomain initialization, whereas previously they were left untouched. This has been tested by Kevin and confirmed to work. The original version of this patch also did not take into consideration that some clockdomains do not have sleep or wakeup dependency sources, which caused NULL pointer dereferences. This problem was debugged and fixed by Kevin Hilman <khilman@deeprootsystems.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jouni Högander <jouni.hogander@nokia.com>
2010-01-27 11:13:01 +08:00
int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm);
OMAP2/3 clkdm/pwrdm: move wkdep/sleepdep handling from pwrdm to clkdm Move clockdomain wakeup dependency and sleep dependency data structures from the powerdomain layer to the clockdomain layer, where they belong. These dependencies were originally placed in the powerdomain layer due to unclear documentation; however, it is clear now that these dependencies are between clockdomains. For OMAP2/3, this is not such a big problem, but for OMAP4 this needs to be fixed. Thanks to Benoît Cousson <b-cousson@ti.com> for his advice on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2010-01-27 11:12:59 +08:00
OMAP: clockdomain: Arch specific funcs for hwsup control of clkdm Define the following architecture specific funtions for omap2/3/4 .clkdm_allow_idle .clkdm_deny_idle Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_allow_idle as clkdm_allow_idle and omap2_clkdm_deny_idle as clkdm_deny_idle. Make the _clkdm_add_autodeps and _clkdm_del_autodeps as non-static so they can be accessed from OMAP2/3 platform specific code. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-26 07:06:48 +08:00
void clkdm_allow_idle(struct clockdomain *clkdm);
void clkdm_deny_idle(struct clockdomain *clkdm);
OMAP2+: clockdomain: add clkdm_in_hwsup() Add a new function, clkdm_in_hwsup(), that returns true if a clockdomain is configured for hardware-supervised idle. It does not actually read the hardware; rather, it checks an internal flag in the struct clockdomain, which is changed when the clockdomain is switched in and out of hardware-supervised idle. This should be safe, since all changes to the idle mode should pass through the clockdomain code. Based on a set of patches by Rajendra Nayak <rnayak@ti.com> which do the same thing by checking the hardware bits. This approach should be faster and more compact. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Todd Poynor <toddpoynor@google.com> Cc: Benoît Cousson <b-cousson@ti.com>
2011-07-10 19:56:54 +08:00
bool clkdm_in_hwsup(struct clockdomain *clkdm);
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
OMAP: clockdomain: Arch specific funcs for sleep/wakeup of clkdm Define the following architecture specific funtions for omap2/3/4 .clkdm_sleep .clkdm_wakeup Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_wakeup as clkdm_wakeup and omap2_clkdm_sleep as clkdm_sleep. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: fixed omap3_clkdm_clear_all_sleepdeps() and omap2_clkdm_clear_all_wkdeps() to test against the correct loop termination condition; thanks to Kevin Hilman for finding and helping fix] Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-26 07:06:47 +08:00
int clkdm_wakeup(struct clockdomain *clkdm);
int clkdm_sleep(struct clockdomain *clkdm);
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable Define the following architecture specific funtions for omap2/3/4 .clkdm_clk_enable .clkdm_clk_disable Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_k_enable as clkdm_clk_enable and omap2_clkdm_clk_disable as clkdm_clk_disable.a Remove unused functions (_enable/_disable_hwsup) and unsed headers from clockdomain.c file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-26 07:06:48 +08:00
int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk);
int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk);
OMAP2+: clockdomain: Add 2 APIs to control clockdomain from hwmod framework Duplicate the existing API for clockdomain enable from clock to enable a clock domain from hwmod framework. This will be needed when the hwmod framework will move from the current clock centric approach to the module based approach. These APIs are returning 0 for the moment for OMAP2 and OMAP3 until their hwmods are updated with the clksm attribute. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10 19:56:54 +08:00
int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh);
int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh);
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
OMAP: clockdomain code/data: remove omap_chip bitmask from struct clockdomain At Tony's request, remove the omap_chip bitmasks from the clockdomain and clockdomain dependency definitions. Instead, initialize clockdomains based on one or more lists that are applicable to a particular SoC family, variant, and silicon revision. Tony Lindgren <tony@atomide.com> found a bug in a previous version of this patch - thanks Tony. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2011-09-15 06:01:21 +08:00
extern void __init omap242x_clockdomains_init(void);
extern void __init omap243x_clockdomains_init(void);
OMAP: clockdomain: Arch specific funcs to handle deps Define the following architecture specific funtions for omap2/3 .clkdm_add_wkdep .clkdm_del_wkdep .clkdm_read_wkdep .clkdm_clear_all_wkdeps .clkdm_add_sleepdep .clkdm_del_sleepdep .clkdm_read_sleepdep .clkdm_clear_all_sleepdeps Convert the platform-independent framework to call these functions. With this also move the clkdm lookups for all wkdep_srcs and sleepdep_srcs at clkdm_init. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: fixed loop termination conditions in omap*_clkdm_clear_all_*(); thanks to Kevin Hilman for finding and helping fix those bugs; also avoid re-resolving clockdomains during init; abstracted out clkdm_dep walk] Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-26 07:06:47 +08:00
extern void __init omap3xxx_clockdomains_init(void);
OMAP2+: clockdomains: move clockdomain static data to .c files Static data should be declared in .c files, not .h files. It should be possible to #include .h files at any point without creating multiple copies of the same data. We converted the clock data to .c files some time ago. This patch does the same for the clockdomain data. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:01:20 +08:00
extern void __init omap44xx_clockdomains_init(void);
OMAP: clockdomain: Arch specific funcs for hwsup control of clkdm Define the following architecture specific funtions for omap2/3/4 .clkdm_allow_idle .clkdm_deny_idle Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_allow_idle as clkdm_allow_idle and omap2_clkdm_deny_idle as clkdm_deny_idle. Make the _clkdm_add_autodeps and _clkdm_del_autodeps as non-static so they can be accessed from OMAP2/3 platform specific code. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-26 07:06:48 +08:00
extern void _clkdm_add_autodeps(struct clockdomain *clkdm);
extern void _clkdm_del_autodeps(struct clockdomain *clkdm);
OMAP2+: clockdomains: move clockdomain static data to .c files Static data should be declared in .c files, not .h files. It should be possible to #include .h files at any point without creating multiple copies of the same data. We converted the clock data to .c files some time ago. This patch does the same for the clockdomain data. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:01:20 +08:00
OMAP: clockdomain: Arch specific funcs to handle deps Define the following architecture specific funtions for omap2/3 .clkdm_add_wkdep .clkdm_del_wkdep .clkdm_read_wkdep .clkdm_clear_all_wkdeps .clkdm_add_sleepdep .clkdm_del_sleepdep .clkdm_read_sleepdep .clkdm_clear_all_sleepdeps Convert the platform-independent framework to call these functions. With this also move the clkdm lookups for all wkdep_srcs and sleepdep_srcs at clkdm_init. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: fixed loop termination conditions in omap*_clkdm_clear_all_*(); thanks to Kevin Hilman for finding and helping fix those bugs; also avoid re-resolving clockdomains during init; abstracted out clkdm_dep walk] Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-26 07:06:47 +08:00
extern struct clkdm_ops omap2_clkdm_operations;
extern struct clkdm_ops omap3_clkdm_operations;
OMAP: clockdomain: Arch specific funcs for sleep/wakeup of clkdm Define the following architecture specific funtions for omap2/3/4 .clkdm_sleep .clkdm_wakeup Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_wakeup as clkdm_wakeup and omap2_clkdm_sleep as clkdm_sleep. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: fixed omap3_clkdm_clear_all_sleepdeps() and omap2_clkdm_clear_all_wkdeps() to test against the correct loop termination condition; thanks to Kevin Hilman for finding and helping fix] Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-26 07:06:47 +08:00
extern struct clkdm_ops omap4_clkdm_operations;
OMAP2+: clockdomains: move clockdomain static data to .c files Static data should be declared in .c files, not .h files. It should be possible to #include .h files at any point without creating multiple copies of the same data. We converted the clock data to .c files some time ago. This patch does the same for the clockdomain data. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:01:20 +08:00
OMAP: clockdomain code/data: remove omap_chip bitmask from struct clockdomain At Tony's request, remove the omap_chip bitmasks from the clockdomain and clockdomain dependency definitions. Instead, initialize clockdomains based on one or more lists that are applicable to a particular SoC family, variant, and silicon revision. Tony Lindgren <tony@atomide.com> found a bug in a previous version of this patch - thanks Tony. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2011-09-15 06:01:21 +08:00
extern struct clkdm_dep gfx_24xx_wkdeps[];
extern struct clkdm_dep dsp_24xx_wkdeps[];
extern struct clockdomain wkup_common_clkdm;
extern struct clockdomain prm_common_clkdm;
extern struct clockdomain cm_common_clkdm;
ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 16:08:43 +08:00
#endif