linux/drivers/scsi/megaraid/megaraid_sas.h

1951 lines
45 KiB
C
Raw Normal View History

/*
* Linux MegaRAID driver for SAS based RAID controllers
*
* Copyright (c) 2003-2013 LSI Corporation
* Copyright (c) 2013-2014 Avago Technologies
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* FILE: megaraid_sas.h
*
* Authors: Avago Technologies
* Kashyap Desai <kashyap.desai@avagotech.com>
* Sumit Saxena <sumit.saxena@avagotech.com>
*
* Send feedback to: megaraidlinux.pdl@avagotech.com
*
* Mail to: Avago Technologies, 350 West Trimble Road, Building 90,
* San Jose, California 95131
*/
#ifndef LSI_MEGARAID_SAS_H
#define LSI_MEGARAID_SAS_H
/*
* MegaRAID SAS Driver meta data
*/
#define MEGASAS_VERSION "06.805.06.01-rc1"
/*
* Device IDs
*/
#define PCI_DEVICE_ID_LSI_SAS1078R 0x0060
#define PCI_DEVICE_ID_LSI_SAS1078DE 0x007C
#define PCI_DEVICE_ID_LSI_VERDE_ZCR 0x0413
#define PCI_DEVICE_ID_LSI_SAS1078GEN2 0x0078
#define PCI_DEVICE_ID_LSI_SAS0079GEN2 0x0079
#define PCI_DEVICE_ID_LSI_SAS0073SKINNY 0x0073
#define PCI_DEVICE_ID_LSI_SAS0071SKINNY 0x0071
#define PCI_DEVICE_ID_LSI_FUSION 0x005b
#define PCI_DEVICE_ID_LSI_PLASMA 0x002f
#define PCI_DEVICE_ID_LSI_INVADER 0x005d
#define PCI_DEVICE_ID_LSI_FURY 0x005f
/*
* Intel HBA SSDIDs
*/
#define MEGARAID_INTEL_RS3DC080_SSDID 0x9360
#define MEGARAID_INTEL_RS3DC040_SSDID 0x9362
#define MEGARAID_INTEL_RS3SC008_SSDID 0x9380
#define MEGARAID_INTEL_RS3MC044_SSDID 0x9381
#define MEGARAID_INTEL_RS3WC080_SSDID 0x9341
#define MEGARAID_INTEL_RS3WC040_SSDID 0x9343
/*
* Intel HBA branding
*/
#define MEGARAID_INTEL_RS3DC080_BRANDING \
"Intel(R) RAID Controller RS3DC080"
#define MEGARAID_INTEL_RS3DC040_BRANDING \
"Intel(R) RAID Controller RS3DC040"
#define MEGARAID_INTEL_RS3SC008_BRANDING \
"Intel(R) RAID Controller RS3SC008"
#define MEGARAID_INTEL_RS3MC044_BRANDING \
"Intel(R) RAID Controller RS3MC044"
#define MEGARAID_INTEL_RS3WC080_BRANDING \
"Intel(R) RAID Controller RS3WC080"
#define MEGARAID_INTEL_RS3WC040_BRANDING \
"Intel(R) RAID Controller RS3WC040"
/*
* =====================================
* MegaRAID SAS MFI firmware definitions
* =====================================
*/
/*
* MFI stands for MegaRAID SAS FW Interface. This is just a moniker for
* protocol between the software and firmware. Commands are issued using
* "message frames"
*/
/*
* FW posts its state in upper 4 bits of outbound_msg_0 register
*/
#define MFI_STATE_MASK 0xF0000000
#define MFI_STATE_UNDEFINED 0x00000000
#define MFI_STATE_BB_INIT 0x10000000
#define MFI_STATE_FW_INIT 0x40000000
#define MFI_STATE_WAIT_HANDSHAKE 0x60000000
#define MFI_STATE_FW_INIT_2 0x70000000
#define MFI_STATE_DEVICE_SCAN 0x80000000
#define MFI_STATE_BOOT_MESSAGE_PENDING 0x90000000
#define MFI_STATE_FLUSH_CACHE 0xA0000000
#define MFI_STATE_READY 0xB0000000
#define MFI_STATE_OPERATIONAL 0xC0000000
#define MFI_STATE_FAULT 0xF0000000
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
#define MFI_STATE_FORCE_OCR 0x00000080
#define MFI_STATE_DMADONE 0x00000008
#define MFI_STATE_CRASH_DUMP_DONE 0x00000004
#define MFI_RESET_REQUIRED 0x00000001
#define MFI_RESET_ADAPTER 0x00000002
#define MEGAMFI_FRAME_SIZE 64
/*
* During FW init, clear pending cmds & reset state using inbound_msg_0
*
* ABORT : Abort all pending cmds
* READY : Move from OPERATIONAL to READY state; discard queue info
* MFIMODE : Discard (possible) low MFA posted in 64-bit mode (??)
* CLR_HANDSHAKE: FW is waiting for HANDSHAKE from BIOS or Driver
* HOTPLUG : Resume from Hotplug
* MFI_STOP_ADP : Send signal to FW to stop processing
*/
#define WRITE_SEQUENCE_OFFSET (0x0000000FC) /* I20 */
#define HOST_DIAGNOSTIC_OFFSET (0x000000F8) /* I20 */
#define DIAG_WRITE_ENABLE (0x00000080)
#define DIAG_RESET_ADAPTER (0x00000004)
#define MFI_ADP_RESET 0x00000040
#define MFI_INIT_ABORT 0x00000001
#define MFI_INIT_READY 0x00000002
#define MFI_INIT_MFIMODE 0x00000004
#define MFI_INIT_CLEAR_HANDSHAKE 0x00000008
#define MFI_INIT_HOTPLUG 0x00000010
#define MFI_STOP_ADP 0x00000020
#define MFI_RESET_FLAGS MFI_INIT_READY| \
MFI_INIT_MFIMODE| \
MFI_INIT_ABORT
/*
* MFI frame flags
*/
#define MFI_FRAME_POST_IN_REPLY_QUEUE 0x0000
#define MFI_FRAME_DONT_POST_IN_REPLY_QUEUE 0x0001
#define MFI_FRAME_SGL32 0x0000
#define MFI_FRAME_SGL64 0x0002
#define MFI_FRAME_SENSE32 0x0000
#define MFI_FRAME_SENSE64 0x0004
#define MFI_FRAME_DIR_NONE 0x0000
#define MFI_FRAME_DIR_WRITE 0x0008
#define MFI_FRAME_DIR_READ 0x0010
#define MFI_FRAME_DIR_BOTH 0x0018
#define MFI_FRAME_IEEE 0x0020
/*
* Definition for cmd_status
*/
#define MFI_CMD_STATUS_POLL_MODE 0xFF
/*
* MFI command opcodes
*/
#define MFI_CMD_INIT 0x00
#define MFI_CMD_LD_READ 0x01
#define MFI_CMD_LD_WRITE 0x02
#define MFI_CMD_LD_SCSI_IO 0x03
#define MFI_CMD_PD_SCSI_IO 0x04
#define MFI_CMD_DCMD 0x05
#define MFI_CMD_ABORT 0x06
#define MFI_CMD_SMP 0x07
#define MFI_CMD_STP 0x08
#define MFI_CMD_INVALID 0xff
#define MR_DCMD_CTRL_GET_INFO 0x01010000
#define MR_DCMD_LD_GET_LIST 0x03010000
#define MR_DCMD_LD_LIST_QUERY 0x03010100
#define MR_DCMD_CTRL_CACHE_FLUSH 0x01101000
#define MR_FLUSH_CTRL_CACHE 0x01
#define MR_FLUSH_DISK_CACHE 0x02
#define MR_DCMD_CTRL_SHUTDOWN 0x01050000
#define MR_DCMD_HIBERNATE_SHUTDOWN 0x01060000
#define MR_ENABLE_DRIVE_SPINDOWN 0x01
#define MR_DCMD_CTRL_EVENT_GET_INFO 0x01040100
#define MR_DCMD_CTRL_EVENT_GET 0x01040300
#define MR_DCMD_CTRL_EVENT_WAIT 0x01040500
#define MR_DCMD_LD_GET_PROPERTIES 0x03030000
#define MR_DCMD_CLUSTER 0x08000000
#define MR_DCMD_CLUSTER_RESET_ALL 0x08010100
#define MR_DCMD_CLUSTER_RESET_LD 0x08010200
#define MR_DCMD_PD_LIST_QUERY 0x02010100
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
#define MR_DCMD_CTRL_SET_CRASH_DUMP_PARAMS 0x01190100
#define MR_DRIVER_SET_APP_CRASHDUMP_MODE (0xF0010000 | 0x0600)
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
/*
* Global functions
*/
extern u8 MR_ValidateMapInfo(struct megasas_instance *instance);
/*
* MFI command completion codes
*/
enum MFI_STAT {
MFI_STAT_OK = 0x00,
MFI_STAT_INVALID_CMD = 0x01,
MFI_STAT_INVALID_DCMD = 0x02,
MFI_STAT_INVALID_PARAMETER = 0x03,
MFI_STAT_INVALID_SEQUENCE_NUMBER = 0x04,
MFI_STAT_ABORT_NOT_POSSIBLE = 0x05,
MFI_STAT_APP_HOST_CODE_NOT_FOUND = 0x06,
MFI_STAT_APP_IN_USE = 0x07,
MFI_STAT_APP_NOT_INITIALIZED = 0x08,
MFI_STAT_ARRAY_INDEX_INVALID = 0x09,
MFI_STAT_ARRAY_ROW_NOT_EMPTY = 0x0a,
MFI_STAT_CONFIG_RESOURCE_CONFLICT = 0x0b,
MFI_STAT_DEVICE_NOT_FOUND = 0x0c,
MFI_STAT_DRIVE_TOO_SMALL = 0x0d,
MFI_STAT_FLASH_ALLOC_FAIL = 0x0e,
MFI_STAT_FLASH_BUSY = 0x0f,
MFI_STAT_FLASH_ERROR = 0x10,
MFI_STAT_FLASH_IMAGE_BAD = 0x11,
MFI_STAT_FLASH_IMAGE_INCOMPLETE = 0x12,
MFI_STAT_FLASH_NOT_OPEN = 0x13,
MFI_STAT_FLASH_NOT_STARTED = 0x14,
MFI_STAT_FLUSH_FAILED = 0x15,
MFI_STAT_HOST_CODE_NOT_FOUNT = 0x16,
MFI_STAT_LD_CC_IN_PROGRESS = 0x17,
MFI_STAT_LD_INIT_IN_PROGRESS = 0x18,
MFI_STAT_LD_LBA_OUT_OF_RANGE = 0x19,
MFI_STAT_LD_MAX_CONFIGURED = 0x1a,
MFI_STAT_LD_NOT_OPTIMAL = 0x1b,
MFI_STAT_LD_RBLD_IN_PROGRESS = 0x1c,
MFI_STAT_LD_RECON_IN_PROGRESS = 0x1d,
MFI_STAT_LD_WRONG_RAID_LEVEL = 0x1e,
MFI_STAT_MAX_SPARES_EXCEEDED = 0x1f,
MFI_STAT_MEMORY_NOT_AVAILABLE = 0x20,
MFI_STAT_MFC_HW_ERROR = 0x21,
MFI_STAT_NO_HW_PRESENT = 0x22,
MFI_STAT_NOT_FOUND = 0x23,
MFI_STAT_NOT_IN_ENCL = 0x24,
MFI_STAT_PD_CLEAR_IN_PROGRESS = 0x25,
MFI_STAT_PD_TYPE_WRONG = 0x26,
MFI_STAT_PR_DISABLED = 0x27,
MFI_STAT_ROW_INDEX_INVALID = 0x28,
MFI_STAT_SAS_CONFIG_INVALID_ACTION = 0x29,
MFI_STAT_SAS_CONFIG_INVALID_DATA = 0x2a,
MFI_STAT_SAS_CONFIG_INVALID_PAGE = 0x2b,
MFI_STAT_SAS_CONFIG_INVALID_TYPE = 0x2c,
MFI_STAT_SCSI_DONE_WITH_ERROR = 0x2d,
MFI_STAT_SCSI_IO_FAILED = 0x2e,
MFI_STAT_SCSI_RESERVATION_CONFLICT = 0x2f,
MFI_STAT_SHUTDOWN_FAILED = 0x30,
MFI_STAT_TIME_NOT_SET = 0x31,
MFI_STAT_WRONG_STATE = 0x32,
MFI_STAT_LD_OFFLINE = 0x33,
MFI_STAT_PEER_NOTIFICATION_REJECTED = 0x34,
MFI_STAT_PEER_NOTIFICATION_FAILED = 0x35,
MFI_STAT_RESERVATION_IN_PROGRESS = 0x36,
MFI_STAT_I2C_ERRORS_DETECTED = 0x37,
MFI_STAT_PCI_ERRORS_DETECTED = 0x38,
MFI_STAT_CONFIG_SEQ_MISMATCH = 0x67,
MFI_STAT_INVALID_STATUS = 0xFF
};
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
/*
* Crash dump related defines
*/
#define MAX_CRASH_DUMP_SIZE 512
#define CRASH_DMA_BUF_SIZE (1024 * 1024)
enum MR_FW_CRASH_DUMP_STATE {
UNAVAILABLE = 0,
AVAILABLE = 1,
COPYING = 2,
COPIED = 3,
COPY_ERROR = 4,
};
enum _MR_CRASH_BUF_STATUS {
MR_CRASH_BUF_TURN_OFF = 0,
MR_CRASH_BUF_TURN_ON = 1,
};
/*
* Number of mailbox bytes in DCMD message frame
*/
#define MFI_MBOX_SIZE 12
enum MR_EVT_CLASS {
MR_EVT_CLASS_DEBUG = -2,
MR_EVT_CLASS_PROGRESS = -1,
MR_EVT_CLASS_INFO = 0,
MR_EVT_CLASS_WARNING = 1,
MR_EVT_CLASS_CRITICAL = 2,
MR_EVT_CLASS_FATAL = 3,
MR_EVT_CLASS_DEAD = 4,
};
enum MR_EVT_LOCALE {
MR_EVT_LOCALE_LD = 0x0001,
MR_EVT_LOCALE_PD = 0x0002,
MR_EVT_LOCALE_ENCL = 0x0004,
MR_EVT_LOCALE_BBU = 0x0008,
MR_EVT_LOCALE_SAS = 0x0010,
MR_EVT_LOCALE_CTRL = 0x0020,
MR_EVT_LOCALE_CONFIG = 0x0040,
MR_EVT_LOCALE_CLUSTER = 0x0080,
MR_EVT_LOCALE_ALL = 0xffff,
};
enum MR_EVT_ARGS {
MR_EVT_ARGS_NONE,
MR_EVT_ARGS_CDB_SENSE,
MR_EVT_ARGS_LD,
MR_EVT_ARGS_LD_COUNT,
MR_EVT_ARGS_LD_LBA,
MR_EVT_ARGS_LD_OWNER,
MR_EVT_ARGS_LD_LBA_PD_LBA,
MR_EVT_ARGS_LD_PROG,
MR_EVT_ARGS_LD_STATE,
MR_EVT_ARGS_LD_STRIP,
MR_EVT_ARGS_PD,
MR_EVT_ARGS_PD_ERR,
MR_EVT_ARGS_PD_LBA,
MR_EVT_ARGS_PD_LBA_LD,
MR_EVT_ARGS_PD_PROG,
MR_EVT_ARGS_PD_STATE,
MR_EVT_ARGS_PCI,
MR_EVT_ARGS_RATE,
MR_EVT_ARGS_STR,
MR_EVT_ARGS_TIME,
MR_EVT_ARGS_ECC,
MR_EVT_ARGS_LD_PROP,
MR_EVT_ARGS_PD_SPARE,
MR_EVT_ARGS_PD_INDEX,
MR_EVT_ARGS_DIAG_PASS,
MR_EVT_ARGS_DIAG_FAIL,
MR_EVT_ARGS_PD_LBA_LBA,
MR_EVT_ARGS_PORT_PHY,
MR_EVT_ARGS_PD_MISSING,
MR_EVT_ARGS_PD_ADDRESS,
MR_EVT_ARGS_BITMAP,
MR_EVT_ARGS_CONNECTOR,
MR_EVT_ARGS_PD_PD,
MR_EVT_ARGS_PD_FRU,
MR_EVT_ARGS_PD_PATHINFO,
MR_EVT_ARGS_PD_POWER_STATE,
MR_EVT_ARGS_GENERIC,
};
/*
* define constants for device list query options
*/
enum MR_PD_QUERY_TYPE {
MR_PD_QUERY_TYPE_ALL = 0,
MR_PD_QUERY_TYPE_STATE = 1,
MR_PD_QUERY_TYPE_POWER_STATE = 2,
MR_PD_QUERY_TYPE_MEDIA_TYPE = 3,
MR_PD_QUERY_TYPE_SPEED = 4,
MR_PD_QUERY_TYPE_EXPOSED_TO_HOST = 5,
};
enum MR_LD_QUERY_TYPE {
MR_LD_QUERY_TYPE_ALL = 0,
MR_LD_QUERY_TYPE_EXPOSED_TO_HOST = 1,
MR_LD_QUERY_TYPE_USED_TGT_IDS = 2,
MR_LD_QUERY_TYPE_CLUSTER_ACCESS = 3,
MR_LD_QUERY_TYPE_CLUSTER_LOCALE = 4,
};
#define MR_EVT_CFG_CLEARED 0x0004
#define MR_EVT_LD_STATE_CHANGE 0x0051
#define MR_EVT_PD_INSERTED 0x005b
#define MR_EVT_PD_REMOVED 0x0070
#define MR_EVT_LD_CREATED 0x008a
#define MR_EVT_LD_DELETED 0x008b
#define MR_EVT_FOREIGN_CFG_IMPORTED 0x00db
#define MR_EVT_LD_OFFLINE 0x00fc
#define MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED 0x0152
enum MR_PD_STATE {
MR_PD_STATE_UNCONFIGURED_GOOD = 0x00,
MR_PD_STATE_UNCONFIGURED_BAD = 0x01,
MR_PD_STATE_HOT_SPARE = 0x02,
MR_PD_STATE_OFFLINE = 0x10,
MR_PD_STATE_FAILED = 0x11,
MR_PD_STATE_REBUILD = 0x14,
MR_PD_STATE_ONLINE = 0x18,
MR_PD_STATE_COPYBACK = 0x20,
MR_PD_STATE_SYSTEM = 0x40,
};
/*
* defines the physical drive address structure
*/
struct MR_PD_ADDRESS {
u16 deviceId;
u16 enclDeviceId;
union {
struct {
u8 enclIndex;
u8 slotNumber;
} mrPdAddress;
struct {
u8 enclPosition;
u8 enclConnectorIndex;
} mrEnclAddress;
};
u8 scsiDevType;
union {
u8 connectedPortBitmap;
u8 connectedPortNumbers;
};
u64 sasAddr[2];
} __packed;
/*
* defines the physical drive list structure
*/
struct MR_PD_LIST {
u32 size;
u32 count;
struct MR_PD_ADDRESS addr[1];
} __packed;
struct megasas_pd_list {
u16 tid;
u8 driveType;
u8 driveState;
} __packed;
/*
* defines the logical drive reference structure
*/
union MR_LD_REF {
struct {
u8 targetId;
u8 reserved;
u16 seqNum;
};
u32 ref;
} __packed;
/*
* defines the logical drive list structure
*/
struct MR_LD_LIST {
u32 ldCount;
u32 reserved;
struct {
union MR_LD_REF ref;
u8 state;
u8 reserved[3];
u64 size;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
} ldList[MAX_LOGICAL_DRIVES_EXT];
} __packed;
struct MR_LD_TARGETID_LIST {
u32 size;
u32 count;
u8 pad[3];
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
u8 targetId[MAX_LOGICAL_DRIVES_EXT];
};
/*
* SAS controller properties
*/
struct megasas_ctrl_prop {
u16 seq_num;
u16 pred_fail_poll_interval;
u16 intr_throttle_count;
u16 intr_throttle_timeouts;
u8 rebuild_rate;
u8 patrol_read_rate;
u8 bgi_rate;
u8 cc_rate;
u8 recon_rate;
u8 cache_flush_interval;
u8 spinup_drv_count;
u8 spinup_delay;
u8 cluster_enable;
u8 coercion_mode;
u8 alarm_enable;
u8 disable_auto_rebuild;
u8 disable_battery_warn;
u8 ecc_bucket_size;
u16 ecc_bucket_leak_rate;
u8 restore_hotspare_on_insertion;
u8 expose_encl_devices;
u8 maintainPdFailHistory;
u8 disallowHostRequestReordering;
u8 abortCCOnError;
u8 loadBalanceMode;
u8 disableAutoDetectBackplane;
u8 snapVDSpace;
/*
* Add properties that can be controlled by
* a bit in the following structure.
*/
struct {
#if defined(__BIG_ENDIAN_BITFIELD)
u32 reserved:18;
u32 enableJBOD:1;
u32 disableSpinDownHS:1;
u32 allowBootWithPinnedCache:1;
u32 disableOnlineCtrlReset:1;
u32 enableSecretKeyControl:1;
u32 autoEnhancedImport:1;
u32 enableSpinDownUnconfigured:1;
u32 SSDPatrolReadEnabled:1;
u32 SSDSMARTerEnabled:1;
u32 disableNCQ:1;
u32 useFdeOnly:1;
u32 prCorrectUnconfiguredAreas:1;
u32 SMARTerEnabled:1;
u32 copyBackDisabled:1;
#else
u32 copyBackDisabled:1;
u32 SMARTerEnabled:1;
u32 prCorrectUnconfiguredAreas:1;
u32 useFdeOnly:1;
u32 disableNCQ:1;
u32 SSDSMARTerEnabled:1;
u32 SSDPatrolReadEnabled:1;
u32 enableSpinDownUnconfigured:1;
u32 autoEnhancedImport:1;
u32 enableSecretKeyControl:1;
u32 disableOnlineCtrlReset:1;
u32 allowBootWithPinnedCache:1;
u32 disableSpinDownHS:1;
u32 enableJBOD:1;
u32 reserved:18;
#endif
} OnOffProperties;
u8 autoSnapVDSpace;
u8 viewSpace;
u16 spinDownTime;
u8 reserved[24];
} __packed;
/*
* SAS controller information
*/
struct megasas_ctrl_info {
/*
* PCI device information
*/
struct {
u16 vendor_id;
u16 device_id;
u16 sub_vendor_id;
u16 sub_device_id;
u8 reserved[24];
} __attribute__ ((packed)) pci;
/*
* Host interface information
*/
struct {
u8 PCIX:1;
u8 PCIE:1;
u8 iSCSI:1;
u8 SAS_3G:1;
u8 SRIOV:1;
u8 reserved_0:3;
u8 reserved_1[6];
u8 port_count;
u64 port_addr[8];
} __attribute__ ((packed)) host_interface;
/*
* Device (backend) interface information
*/
struct {
u8 SPI:1;
u8 SAS_3G:1;
u8 SATA_1_5G:1;
u8 SATA_3G:1;
u8 reserved_0:4;
u8 reserved_1[6];
u8 port_count;
u64 port_addr[8];
} __attribute__ ((packed)) device_interface;
/*
* List of components residing in flash. All str are null terminated
*/
u32 image_check_word;
u32 image_component_count;
struct {
char name[8];
char version[32];
char build_date[16];
char built_time[16];
} __attribute__ ((packed)) image_component[8];
/*
* List of flash components that have been flashed on the card, but
* are not in use, pending reset of the adapter. This list will be
* empty if a flash operation has not occurred. All stings are null
* terminated
*/
u32 pending_image_component_count;
struct {
char name[8];
char version[32];
char build_date[16];
char build_time[16];
} __attribute__ ((packed)) pending_image_component[8];
u8 max_arms;
u8 max_spans;
u8 max_arrays;
u8 max_lds;
char product_name[80];
char serial_no[32];
/*
* Other physical/controller/operation information. Indicates the
* presence of the hardware
*/
struct {
u32 bbu:1;
u32 alarm:1;
u32 nvram:1;
u32 uart:1;
u32 reserved:28;
} __attribute__ ((packed)) hw_present;
u32 current_fw_time;
/*
* Maximum data transfer sizes
*/
u16 max_concurrent_cmds;
u16 max_sge_count;
u32 max_request_size;
/*
* Logical and physical device counts
*/
u16 ld_present_count;
u16 ld_degraded_count;
u16 ld_offline_count;
u16 pd_present_count;
u16 pd_disk_present_count;
u16 pd_disk_pred_failure_count;
u16 pd_disk_failed_count;
/*
* Memory size information
*/
u16 nvram_size;
u16 memory_size;
u16 flash_size;
/*
* Error counters
*/
u16 mem_correctable_error_count;
u16 mem_uncorrectable_error_count;
/*
* Cluster information
*/
u8 cluster_permitted;
u8 cluster_active;
/*
* Additional max data transfer sizes
*/
u16 max_strips_per_io;
/*
* Controller capabilities structures
*/
struct {
u32 raid_level_0:1;
u32 raid_level_1:1;
u32 raid_level_5:1;
u32 raid_level_1E:1;
u32 raid_level_6:1;
u32 reserved:27;
} __attribute__ ((packed)) raid_levels;
struct {
u32 rbld_rate:1;
u32 cc_rate:1;
u32 bgi_rate:1;
u32 recon_rate:1;
u32 patrol_rate:1;
u32 alarm_control:1;
u32 cluster_supported:1;
u32 bbu:1;
u32 spanning_allowed:1;
u32 dedicated_hotspares:1;
u32 revertible_hotspares:1;
u32 foreign_config_import:1;
u32 self_diagnostic:1;
u32 mixed_redundancy_arr:1;
u32 global_hot_spares:1;
u32 reserved:17;
} __attribute__ ((packed)) adapter_operations;
struct {
u32 read_policy:1;
u32 write_policy:1;
u32 io_policy:1;
u32 access_policy:1;
u32 disk_cache_policy:1;
u32 reserved:27;
} __attribute__ ((packed)) ld_operations;
struct {
u8 min;
u8 max;
u8 reserved[2];
} __attribute__ ((packed)) stripe_sz_ops;
struct {
u32 force_online:1;
u32 force_offline:1;
u32 force_rebuild:1;
u32 reserved:29;
} __attribute__ ((packed)) pd_operations;
struct {
u32 ctrl_supports_sas:1;
u32 ctrl_supports_sata:1;
u32 allow_mix_in_encl:1;
u32 allow_mix_in_ld:1;
u32 allow_sata_in_cluster:1;
u32 reserved:27;
} __attribute__ ((packed)) pd_mix_support;
/*
* Define ECC single-bit-error bucket information
*/
u8 ecc_bucket_count;
u8 reserved_2[11];
/*
* Include the controller properties (changeable items)
*/
struct megasas_ctrl_prop properties;
/*
* Define FW pkg version (set in envt v'bles on OEM basis)
*/
char package_version[0x60];
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
/*
* If adapterOperations.supportMoreThan8Phys is set,
* and deviceInterface.portCount is greater than 8,
* SAS Addrs for first 8 ports shall be populated in
* deviceInterface.portAddr, and the rest shall be
* populated in deviceInterfacePortAddr2.
*/
u64 deviceInterfacePortAddr2[8]; /*6a0h */
u8 reserved3[128]; /*6e0h */
struct { /*760h */
u16 minPdRaidLevel_0:4;
u16 maxPdRaidLevel_0:12;
u16 minPdRaidLevel_1:4;
u16 maxPdRaidLevel_1:12;
u16 minPdRaidLevel_5:4;
u16 maxPdRaidLevel_5:12;
u16 minPdRaidLevel_1E:4;
u16 maxPdRaidLevel_1E:12;
u16 minPdRaidLevel_6:4;
u16 maxPdRaidLevel_6:12;
u16 minPdRaidLevel_10:4;
u16 maxPdRaidLevel_10:12;
u16 minPdRaidLevel_50:4;
u16 maxPdRaidLevel_50:12;
u16 minPdRaidLevel_60:4;
u16 maxPdRaidLevel_60:12;
u16 minPdRaidLevel_1E_RLQ0:4;
u16 maxPdRaidLevel_1E_RLQ0:12;
u16 minPdRaidLevel_1E0_RLQ0:4;
u16 maxPdRaidLevel_1E0_RLQ0:12;
u16 reserved[6];
} pdsForRaidLevels;
u16 maxPds; /*780h */
u16 maxDedHSPs; /*782h */
u16 maxGlobalHSPs; /*784h */
u16 ddfSize; /*786h */
u8 maxLdsPerArray; /*788h */
u8 partitionsInDDF; /*789h */
u8 lockKeyBinding; /*78ah */
u8 maxPITsPerLd; /*78bh */
u8 maxViewsPerLd; /*78ch */
u8 maxTargetId; /*78dh */
u16 maxBvlVdSize; /*78eh */
u16 maxConfigurableSSCSize; /*790h */
u16 currentSSCsize; /*792h */
char expanderFwVersion[12]; /*794h */
u16 PFKTrialTimeRemaining; /*7A0h */
u16 cacheMemorySize; /*7A2h */
struct { /*7A4h */
#if defined(__BIG_ENDIAN_BITFIELD)
u32 reserved:5;
u32 activePassive:2;
u32 supportConfigAutoBalance:1;
u32 mpio:1;
u32 supportDataLDonSSCArray:1;
u32 supportPointInTimeProgress:1;
u32 supportUnevenSpans:1;
u32 dedicatedHotSparesLimited:1;
u32 headlessMode:1;
u32 supportEmulatedDrives:1;
u32 supportResetNow:1;
u32 realTimeScheduler:1;
u32 supportSSDPatrolRead:1;
u32 supportPerfTuning:1;
u32 disableOnlinePFKChange:1;
u32 supportJBOD:1;
u32 supportBootTimePFKChange:1;
u32 supportSetLinkSpeed:1;
u32 supportEmergencySpares:1;
u32 supportSuspendResumeBGops:1;
u32 blockSSDWriteCacheChange:1;
u32 supportShieldState:1;
u32 supportLdBBMInfo:1;
u32 supportLdPIType3:1;
u32 supportLdPIType2:1;
u32 supportLdPIType1:1;
u32 supportPIcontroller:1;
#else
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
u32 supportPIcontroller:1;
u32 supportLdPIType1:1;
u32 supportLdPIType2:1;
u32 supportLdPIType3:1;
u32 supportLdBBMInfo:1;
u32 supportShieldState:1;
u32 blockSSDWriteCacheChange:1;
u32 supportSuspendResumeBGops:1;
u32 supportEmergencySpares:1;
u32 supportSetLinkSpeed:1;
u32 supportBootTimePFKChange:1;
u32 supportJBOD:1;
u32 disableOnlinePFKChange:1;
u32 supportPerfTuning:1;
u32 supportSSDPatrolRead:1;
u32 realTimeScheduler:1;
u32 supportResetNow:1;
u32 supportEmulatedDrives:1;
u32 headlessMode:1;
u32 dedicatedHotSparesLimited:1;
u32 supportUnevenSpans:1;
u32 supportPointInTimeProgress:1;
u32 supportDataLDonSSCArray:1;
u32 mpio:1;
u32 supportConfigAutoBalance:1;
u32 activePassive:2;
u32 reserved:5;
#endif
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
} adapterOperations2;
u8 driverVersion[32]; /*7A8h */
u8 maxDAPdCountSpinup60; /*7C8h */
u8 temperatureROC; /*7C9h */
u8 temperatureCtrl; /*7CAh */
u8 reserved4; /*7CBh */
u16 maxConfigurablePds; /*7CCh */
u8 reserved5[2]; /*0x7CDh */
/*
* HA cluster information
*/
struct {
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
#if defined(__BIG_ENDIAN_BITFIELD)
u32 reserved:26;
u32 premiumFeatureMismatch:1;
u32 ctrlPropIncompatible:1;
u32 fwVersionMismatch:1;
u32 hwIncompatible:1;
u32 peerIsIncompatible:1;
u32 peerIsPresent:1;
#else
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
u32 peerIsPresent:1;
u32 peerIsIncompatible:1;
u32 hwIncompatible:1;
u32 fwVersionMismatch:1;
u32 ctrlPropIncompatible:1;
u32 premiumFeatureMismatch:1;
u32 reserved:26;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
#endif
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
} cluster;
char clusterId[16]; /*7D4h */
struct {
u8 maxVFsSupported; /*0x7E4*/
u8 numVFsEnabled; /*0x7E5*/
u8 requestorId; /*0x7E6 0:PF, 1:VF1, 2:VF2*/
u8 reserved; /*0x7E7*/
} iov;
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
struct {
#if defined(__BIG_ENDIAN_BITFIELD)
u32 reserved:25;
u32 supportCrashDump:1;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
u32 supportMaxExtLDs:1;
u32 supportT10RebuildAssist:1;
u32 supportDisableImmediateIO:1;
u32 supportThermalPollInterval:1;
u32 supportPersonalityChange:2;
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
#else
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
u32 supportPersonalityChange:2;
u32 supportThermalPollInterval:1;
u32 supportDisableImmediateIO:1;
u32 supportT10RebuildAssist:1;
u32 supportMaxExtLDs:1;
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
u32 supportCrashDump:1;
u32 reserved:25;
#endif
} adapterOperations3;
u8 pad[0x800-0x7EC];
} __packed;
/*
* ===============================
* MegaRAID SAS driver definitions
* ===============================
*/
#define MEGASAS_MAX_PD_CHANNELS 2
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
#define MEGASAS_MAX_LD_CHANNELS 2
#define MEGASAS_MAX_CHANNELS (MEGASAS_MAX_PD_CHANNELS + \
MEGASAS_MAX_LD_CHANNELS)
#define MEGASAS_MAX_DEV_PER_CHANNEL 128
#define MEGASAS_DEFAULT_INIT_ID -1
#define MEGASAS_MAX_LUN 8
#define MEGASAS_DEFAULT_CMD_PER_LUN 256
#define MEGASAS_MAX_PD (MEGASAS_MAX_PD_CHANNELS * \
MEGASAS_MAX_DEV_PER_CHANNEL)
#define MEGASAS_MAX_LD_IDS (MEGASAS_MAX_LD_CHANNELS * \
MEGASAS_MAX_DEV_PER_CHANNEL)
#define MEGASAS_MAX_SECTORS (2*1024)
#define MEGASAS_MAX_SECTORS_IEEE (2*128)
#define MEGASAS_DBG_LVL 1
#define MEGASAS_FW_BUSY 1
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
#define VD_EXT_DEBUG 0
enum MR_MFI_MPT_PTHR_FLAGS {
MFI_MPT_DETACHED = 0,
MFI_LIST_ADDED = 1,
MFI_MPT_ATTACHED = 2,
};
/* Frame Type */
#define IO_FRAME 0
#define PTHRU_FRAME 1
/*
* When SCSI mid-layer calls driver's reset routine, driver waits for
* MEGASAS_RESET_WAIT_TIME seconds for all outstanding IO to complete. Note
* that the driver cannot _actually_ abort or reset pending commands. While
* it is waiting for the commands to complete, it prints a diagnostic message
* every MEGASAS_RESET_NOTICE_INTERVAL seconds
*/
#define MEGASAS_RESET_WAIT_TIME 180
#define MEGASAS_INTERNAL_CMD_WAIT_TIME 180
#define MEGASAS_RESET_NOTICE_INTERVAL 5
#define MEGASAS_IOCTL_CMD 0
#define MEGASAS_DEFAULT_CMD_TIMEOUT 90
#define MEGASAS_THROTTLE_QUEUE_DEPTH 16
#define MEGASAS_BLOCKED_CMD_TIMEOUT 60
/*
* FW reports the maximum of number of commands that it can accept (maximum
* commands that can be outstanding) at any time. The driver must report a
* lower number to the mid layer because it can issue a few internal commands
* itself (E.g, AEN, abort cmd, IOCTLs etc). The number of commands it needs
* is shown below
*/
#define MEGASAS_INT_CMDS 32
#define MEGASAS_SKINNY_INT_CMDS 5
#define MEGASAS_MAX_MSIX_QUEUES 128
/*
* FW can accept both 32 and 64 bit SGLs. We want to allocate 32/64 bit
* SGLs based on the size of dma_addr_t
*/
#define IS_DMA64 (sizeof(dma_addr_t) == 8)
#define MFI_XSCALE_OMR0_CHANGE_INTERRUPT 0x00000001
#define MFI_INTR_FLAG_REPLY_MESSAGE 0x00000001
#define MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE 0x00000002
#define MFI_G2_OUTBOUND_DOORBELL_CHANGE_INTERRUPT 0x00000004
#define MFI_OB_INTR_STATUS_MASK 0x00000002
#define MFI_POLL_TIMEOUT_SECS 60
#define MEGASAS_SRIOV_HEARTBEAT_INTERVAL_VF (5 * HZ)
#define MEGASAS_OCR_SETTLE_TIME_VF (1000 * 30)
#define MEGASAS_ROUTINE_WAIT_TIME_VF 300
#define MFI_REPLY_1078_MESSAGE_INTERRUPT 0x80000000
#define MFI_REPLY_GEN2_MESSAGE_INTERRUPT 0x00000001
#define MFI_GEN2_ENABLE_INTERRUPT_MASK (0x00000001 | 0x00000004)
#define MFI_REPLY_SKINNY_MESSAGE_INTERRUPT 0x40000000
#define MFI_SKINNY_ENABLE_INTERRUPT_MASK (0x00000001)
#define MFI_1068_PCSR_OFFSET 0x84
#define MFI_1068_FW_HANDSHAKE_OFFSET 0x64
#define MFI_1068_FW_READY 0xDDDD0000
#define MR_MAX_REPLY_QUEUES_OFFSET 0X0000001F
#define MR_MAX_REPLY_QUEUES_EXT_OFFSET 0X003FC000
#define MR_MAX_REPLY_QUEUES_EXT_OFFSET_SHIFT 14
#define MR_MAX_MSIX_REG_ARRAY 16
/*
* register set for both 1068 and 1078 controllers
* structure extended for 1078 registers
*/
struct megasas_register_set {
u32 doorbell; /*0000h*/
u32 fusion_seq_offset; /*0004h*/
u32 fusion_host_diag; /*0008h*/
u32 reserved_01; /*000Ch*/
u32 inbound_msg_0; /*0010h*/
u32 inbound_msg_1; /*0014h*/
u32 outbound_msg_0; /*0018h*/
u32 outbound_msg_1; /*001Ch*/
u32 inbound_doorbell; /*0020h*/
u32 inbound_intr_status; /*0024h*/
u32 inbound_intr_mask; /*0028h*/
u32 outbound_doorbell; /*002Ch*/
u32 outbound_intr_status; /*0030h*/
u32 outbound_intr_mask; /*0034h*/
u32 reserved_1[2]; /*0038h*/
u32 inbound_queue_port; /*0040h*/
u32 outbound_queue_port; /*0044h*/
u32 reserved_2[9]; /*0048h*/
u32 reply_post_host_index; /*006Ch*/
u32 reserved_2_2[12]; /*0070h*/
u32 outbound_doorbell_clear; /*00A0h*/
u32 reserved_3[3]; /*00A4h*/
u32 outbound_scratch_pad ; /*00B0h*/
u32 outbound_scratch_pad_2; /*00B4h*/
u32 reserved_4[2]; /*00B8h*/
u32 inbound_low_queue_port ; /*00C0h*/
u32 inbound_high_queue_port ; /*00C4h*/
u32 reserved_5; /*00C8h*/
u32 res_6[11]; /*CCh*/
u32 host_diag;
u32 seq_offset;
u32 index_registers[807]; /*00CCh*/
} __attribute__ ((packed));
struct megasas_sge32 {
u32 phys_addr;
u32 length;
} __attribute__ ((packed));
struct megasas_sge64 {
u64 phys_addr;
u32 length;
} __attribute__ ((packed));
struct megasas_sge_skinny {
u64 phys_addr;
u32 length;
u32 flag;
} __packed;
union megasas_sgl {
struct megasas_sge32 sge32[1];
struct megasas_sge64 sge64[1];
struct megasas_sge_skinny sge_skinny[1];
} __attribute__ ((packed));
struct megasas_header {
u8 cmd; /*00h */
u8 sense_len; /*01h */
u8 cmd_status; /*02h */
u8 scsi_status; /*03h */
u8 target_id; /*04h */
u8 lun; /*05h */
u8 cdb_len; /*06h */
u8 sge_count; /*07h */
u32 context; /*08h */
u32 pad_0; /*0Ch */
u16 flags; /*10h */
u16 timeout; /*12h */
u32 data_xferlen; /*14h */
} __attribute__ ((packed));
union megasas_sgl_frame {
struct megasas_sge32 sge32[8];
struct megasas_sge64 sge64[5];
} __attribute__ ((packed));
typedef union _MFI_CAPABILITIES {
struct {
#if defined(__BIG_ENDIAN_BITFIELD)
u32 reserved:27;
u32 support_ndrive_r1_lb:1;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
u32 support_max_255lds:1;
u32 reserved1:1;
u32 support_additional_msix:1;
u32 support_fp_remote_lun:1;
#else
u32 support_fp_remote_lun:1;
u32 support_additional_msix:1;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
u32 reserved1:1;
u32 support_max_255lds:1;
u32 support_ndrive_r1_lb:1;
u32 reserved:27;
#endif
} mfi_capabilities;
u32 reg;
} MFI_CAPABILITIES;
struct megasas_init_frame {
u8 cmd; /*00h */
u8 reserved_0; /*01h */
u8 cmd_status; /*02h */
u8 reserved_1; /*03h */
MFI_CAPABILITIES driver_operations; /*04h*/
u32 context; /*08h */
u32 pad_0; /*0Ch */
u16 flags; /*10h */
u16 reserved_3; /*12h */
u32 data_xfer_len; /*14h */
u32 queue_info_new_phys_addr_lo; /*18h */
u32 queue_info_new_phys_addr_hi; /*1Ch */
u32 queue_info_old_phys_addr_lo; /*20h */
u32 queue_info_old_phys_addr_hi; /*24h */
u32 reserved_4[6]; /*28h */
} __attribute__ ((packed));
struct megasas_init_queue_info {
u32 init_flags; /*00h */
u32 reply_queue_entries; /*04h */
u32 reply_queue_start_phys_addr_lo; /*08h */
u32 reply_queue_start_phys_addr_hi; /*0Ch */
u32 producer_index_phys_addr_lo; /*10h */
u32 producer_index_phys_addr_hi; /*14h */
u32 consumer_index_phys_addr_lo; /*18h */
u32 consumer_index_phys_addr_hi; /*1Ch */
} __attribute__ ((packed));
struct megasas_io_frame {
u8 cmd; /*00h */
u8 sense_len; /*01h */
u8 cmd_status; /*02h */
u8 scsi_status; /*03h */
u8 target_id; /*04h */
u8 access_byte; /*05h */
u8 reserved_0; /*06h */
u8 sge_count; /*07h */
u32 context; /*08h */
u32 pad_0; /*0Ch */
u16 flags; /*10h */
u16 timeout; /*12h */
u32 lba_count; /*14h */
u32 sense_buf_phys_addr_lo; /*18h */
u32 sense_buf_phys_addr_hi; /*1Ch */
u32 start_lba_lo; /*20h */
u32 start_lba_hi; /*24h */
union megasas_sgl sgl; /*28h */
} __attribute__ ((packed));
struct megasas_pthru_frame {
u8 cmd; /*00h */
u8 sense_len; /*01h */
u8 cmd_status; /*02h */
u8 scsi_status; /*03h */
u8 target_id; /*04h */
u8 lun; /*05h */
u8 cdb_len; /*06h */
u8 sge_count; /*07h */
u32 context; /*08h */
u32 pad_0; /*0Ch */
u16 flags; /*10h */
u16 timeout; /*12h */
u32 data_xfer_len; /*14h */
u32 sense_buf_phys_addr_lo; /*18h */
u32 sense_buf_phys_addr_hi; /*1Ch */
u8 cdb[16]; /*20h */
union megasas_sgl sgl; /*30h */
} __attribute__ ((packed));
struct megasas_dcmd_frame {
u8 cmd; /*00h */
u8 reserved_0; /*01h */
u8 cmd_status; /*02h */
u8 reserved_1[4]; /*03h */
u8 sge_count; /*07h */
u32 context; /*08h */
u32 pad_0; /*0Ch */
u16 flags; /*10h */
u16 timeout; /*12h */
u32 data_xfer_len; /*14h */
u32 opcode; /*18h */
union { /*1Ch */
u8 b[12];
u16 s[6];
u32 w[3];
} mbox;
union megasas_sgl sgl; /*28h */
} __attribute__ ((packed));
struct megasas_abort_frame {
u8 cmd; /*00h */
u8 reserved_0; /*01h */
u8 cmd_status; /*02h */
u8 reserved_1; /*03h */
u32 reserved_2; /*04h */
u32 context; /*08h */
u32 pad_0; /*0Ch */
u16 flags; /*10h */
u16 reserved_3; /*12h */
u32 reserved_4; /*14h */
u32 abort_context; /*18h */
u32 pad_1; /*1Ch */
u32 abort_mfi_phys_addr_lo; /*20h */
u32 abort_mfi_phys_addr_hi; /*24h */
u32 reserved_5[6]; /*28h */
} __attribute__ ((packed));
struct megasas_smp_frame {
u8 cmd; /*00h */
u8 reserved_1; /*01h */
u8 cmd_status; /*02h */
u8 connection_status; /*03h */
u8 reserved_2[3]; /*04h */
u8 sge_count; /*07h */
u32 context; /*08h */
u32 pad_0; /*0Ch */
u16 flags; /*10h */
u16 timeout; /*12h */
u32 data_xfer_len; /*14h */
u64 sas_addr; /*18h */
union {
struct megasas_sge32 sge32[2]; /* [0]: resp [1]: req */
struct megasas_sge64 sge64[2]; /* [0]: resp [1]: req */
} sgl;
} __attribute__ ((packed));
struct megasas_stp_frame {
u8 cmd; /*00h */
u8 reserved_1; /*01h */
u8 cmd_status; /*02h */
u8 reserved_2; /*03h */
u8 target_id; /*04h */
u8 reserved_3[2]; /*05h */
u8 sge_count; /*07h */
u32 context; /*08h */
u32 pad_0; /*0Ch */
u16 flags; /*10h */
u16 timeout; /*12h */
u32 data_xfer_len; /*14h */
u16 fis[10]; /*18h */
u32 stp_flags;
union {
struct megasas_sge32 sge32[2]; /* [0]: resp [1]: data */
struct megasas_sge64 sge64[2]; /* [0]: resp [1]: data */
} sgl;
} __attribute__ ((packed));
union megasas_frame {
struct megasas_header hdr;
struct megasas_init_frame init;
struct megasas_io_frame io;
struct megasas_pthru_frame pthru;
struct megasas_dcmd_frame dcmd;
struct megasas_abort_frame abort;
struct megasas_smp_frame smp;
struct megasas_stp_frame stp;
u8 raw_bytes[64];
};
struct megasas_cmd;
union megasas_evt_class_locale {
struct {
#ifndef __BIG_ENDIAN_BITFIELD
u16 locale;
u8 reserved;
s8 class;
#else
s8 class;
u8 reserved;
u16 locale;
#endif
} __attribute__ ((packed)) members;
u32 word;
} __attribute__ ((packed));
struct megasas_evt_log_info {
u32 newest_seq_num;
u32 oldest_seq_num;
u32 clear_seq_num;
u32 shutdown_seq_num;
u32 boot_seq_num;
} __attribute__ ((packed));
struct megasas_progress {
u16 progress;
u16 elapsed_seconds;
} __attribute__ ((packed));
struct megasas_evtarg_ld {
u16 target_id;
u8 ld_index;
u8 reserved;
} __attribute__ ((packed));
struct megasas_evtarg_pd {
u16 device_id;
u8 encl_index;
u8 slot_number;
} __attribute__ ((packed));
struct megasas_evt_detail {
u32 seq_num;
u32 time_stamp;
u32 code;
union megasas_evt_class_locale cl;
u8 arg_type;
u8 reserved1[15];
union {
struct {
struct megasas_evtarg_pd pd;
u8 cdb_length;
u8 sense_length;
u8 reserved[2];
u8 cdb[16];
u8 sense[64];
} __attribute__ ((packed)) cdbSense;
struct megasas_evtarg_ld ld;
struct {
struct megasas_evtarg_ld ld;
u64 count;
} __attribute__ ((packed)) ld_count;
struct {
u64 lba;
struct megasas_evtarg_ld ld;
} __attribute__ ((packed)) ld_lba;
struct {
struct megasas_evtarg_ld ld;
u32 prevOwner;
u32 newOwner;
} __attribute__ ((packed)) ld_owner;
struct {
u64 ld_lba;
u64 pd_lba;
struct megasas_evtarg_ld ld;
struct megasas_evtarg_pd pd;
} __attribute__ ((packed)) ld_lba_pd_lba;
struct {
struct megasas_evtarg_ld ld;
struct megasas_progress prog;
} __attribute__ ((packed)) ld_prog;
struct {
struct megasas_evtarg_ld ld;
u32 prev_state;
u32 new_state;
} __attribute__ ((packed)) ld_state;
struct {
u64 strip;
struct megasas_evtarg_ld ld;
} __attribute__ ((packed)) ld_strip;
struct megasas_evtarg_pd pd;
struct {
struct megasas_evtarg_pd pd;
u32 err;
} __attribute__ ((packed)) pd_err;
struct {
u64 lba;
struct megasas_evtarg_pd pd;
} __attribute__ ((packed)) pd_lba;
struct {
u64 lba;
struct megasas_evtarg_pd pd;
struct megasas_evtarg_ld ld;
} __attribute__ ((packed)) pd_lba_ld;
struct {
struct megasas_evtarg_pd pd;
struct megasas_progress prog;
} __attribute__ ((packed)) pd_prog;
struct {
struct megasas_evtarg_pd pd;
u32 prevState;
u32 newState;
} __attribute__ ((packed)) pd_state;
struct {
u16 vendorId;
u16 deviceId;
u16 subVendorId;
u16 subDeviceId;
} __attribute__ ((packed)) pci;
u32 rate;
char str[96];
struct {
u32 rtc;
u32 elapsedSeconds;
} __attribute__ ((packed)) time;
struct {
u32 ecar;
u32 elog;
char str[64];
} __attribute__ ((packed)) ecc;
u8 b[96];
u16 s[48];
u32 w[24];
u64 d[12];
} args;
char description[128];
} __attribute__ ((packed));
struct megasas_aen_event {
struct delayed_work hotplug_work;
struct megasas_instance *instance;
};
struct megasas_irq_context {
struct megasas_instance *instance;
u32 MSIxIndex;
};
struct megasas_instance {
u32 *producer;
dma_addr_t producer_h;
u32 *consumer;
dma_addr_t consumer_h;
struct MR_LD_VF_AFFILIATION *vf_affiliation;
dma_addr_t vf_affiliation_h;
struct MR_LD_VF_AFFILIATION_111 *vf_affiliation_111;
dma_addr_t vf_affiliation_111_h;
struct MR_CTRL_HB_HOST_MEM *hb_host_mem;
dma_addr_t hb_host_mem_h;
u32 *reply_queue;
dma_addr_t reply_queue_h;
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
u32 *crash_dump_buf;
dma_addr_t crash_dump_h;
void *crash_buf[MAX_CRASH_DUMP_SIZE];
u32 crash_buf_pages;
unsigned int fw_crash_buffer_size;
unsigned int fw_crash_state;
unsigned int fw_crash_buffer_offset;
u32 drv_buf_index;
u32 drv_buf_alloc;
u32 crash_dump_fw_support;
u32 crash_dump_drv_support;
u32 crash_dump_app_support;
spinlock_t crashdump_lock;
struct megasas_register_set __iomem *reg_set;
u32 *reply_post_host_index_addr[MR_MAX_MSIX_REG_ARRAY];
struct megasas_pd_list pd_list[MEGASAS_MAX_PD];
struct megasas_pd_list local_pd_list[MEGASAS_MAX_PD];
u8 ld_ids[MEGASAS_MAX_LD_IDS];
s8 init_id;
u16 max_num_sge;
u16 max_fw_cmds;
/* For Fusion its num IOCTL cmds, for others MFI based its
max_fw_cmds */
u16 max_mfi_cmds;
u32 max_sectors_per_req;
struct megasas_aen_event *ev;
struct megasas_cmd **cmd_list;
struct list_head cmd_pool;
/* used to sync fire the cmd to fw */
spinlock_t mfi_pool_lock;
/* used to sync fire the cmd to fw */
spinlock_t hba_lock;
/* used to synch producer, consumer ptrs in dpc */
spinlock_t completion_lock;
struct dma_pool *frame_dma_pool;
struct dma_pool *sense_dma_pool;
struct megasas_evt_detail *evt_detail;
dma_addr_t evt_detail_h;
struct megasas_cmd *aen_cmd;
struct mutex aen_mutex;
struct semaphore ioctl_sem;
struct Scsi_Host *host;
wait_queue_head_t int_cmd_wait_q;
wait_queue_head_t abort_cmd_wait_q;
struct pci_dev *pdev;
u32 unique_id;
u32 fw_support_ieee;
atomic_t fw_outstanding;
atomic_t fw_reset_no_pci_access;
struct megasas_instance_template *instancet;
struct tasklet_struct isr_tasklet;
struct work_struct work_init;
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
struct work_struct crash_init;
u8 flag;
u8 unload;
u8 flag_ieee;
u8 issuepend_done;
u8 disableOnlineCtrlReset;
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
u8 UnevenSpanSupport;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
u8 supportmax256vd;
u16 fw_supported_vd_count;
u16 fw_supported_pd_count;
u16 drv_supported_vd_count;
u16 drv_supported_pd_count;
u8 adprecovery;
unsigned long last_time;
u32 mfiStatus;
u32 last_seq_num;
struct list_head internal_reset_pending_q;
/* Ptr to hba specific information */
void *ctrl_context;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
u32 ctrl_context_pages;
struct megasas_ctrl_info *ctrl_info;
unsigned int msix_vectors;
struct msix_entry msixentry[MEGASAS_MAX_MSIX_QUEUES];
struct megasas_irq_context irq_context[MEGASAS_MAX_MSIX_QUEUES];
u64 map_id;
struct megasas_cmd *map_update_cmd;
unsigned long bar;
long reset_flags;
struct mutex reset_mutex;
struct timer_list sriov_heartbeat_timer;
char skip_heartbeat_timer_del;
u8 requestorId;
char PlasmaFW111;
char mpio;
int throttlequeuedepth;
u8 mask_interrupts;
u8 is_imr;
};
struct MR_LD_VF_MAP {
u32 size;
union MR_LD_REF ref;
u8 ldVfCount;
u8 reserved[6];
u8 policy[1];
};
struct MR_LD_VF_AFFILIATION {
u32 size;
u8 ldCount;
u8 vfCount;
u8 thisVf;
u8 reserved[9];
struct MR_LD_VF_MAP map[1];
};
/* Plasma 1.11 FW backward compatibility structures */
#define IOV_111_OFFSET 0x7CE
#define MAX_VIRTUAL_FUNCTIONS 8
#define MR_LD_ACCESS_HIDDEN 15
struct IOV_111 {
u8 maxVFsSupported;
u8 numVFsEnabled;
u8 requestorId;
u8 reserved[5];
};
struct MR_LD_VF_MAP_111 {
u8 targetId;
u8 reserved[3];
u8 policy[MAX_VIRTUAL_FUNCTIONS];
};
struct MR_LD_VF_AFFILIATION_111 {
u8 vdCount;
u8 vfCount;
u8 thisVf;
u8 reserved[5];
struct MR_LD_VF_MAP_111 map[MAX_LOGICAL_DRIVES];
};
struct MR_CTRL_HB_HOST_MEM {
struct {
u32 fwCounter; /* Firmware heart beat counter */
struct {
u32 debugmode:1; /* 1=Firmware is in debug mode.
Heart beat will not be updated. */
u32 reserved:31;
} debug;
u32 reserved_fw[6];
u32 driverCounter; /* Driver heart beat counter. 0x20 */
u32 reserved_driver[7];
} HB;
u8 pad[0x400-0x40];
};
enum {
MEGASAS_HBA_OPERATIONAL = 0,
MEGASAS_ADPRESET_SM_INFAULT = 1,
MEGASAS_ADPRESET_SM_FW_RESET_SUCCESS = 2,
MEGASAS_ADPRESET_SM_OPERATIONAL = 3,
MEGASAS_HW_CRITICAL_ERROR = 4,
MEGASAS_ADPRESET_SM_POLLING = 5,
MEGASAS_ADPRESET_INPROG_SIGN = 0xDEADDEAD,
};
struct megasas_instance_template {
void (*fire_cmd)(struct megasas_instance *, dma_addr_t, \
u32, struct megasas_register_set __iomem *);
void (*enable_intr)(struct megasas_instance *);
void (*disable_intr)(struct megasas_instance *);
int (*clear_intr)(struct megasas_register_set __iomem *);
u32 (*read_fw_status_reg)(struct megasas_register_set __iomem *);
int (*adp_reset)(struct megasas_instance *, \
struct megasas_register_set __iomem *);
int (*check_reset)(struct megasas_instance *, \
struct megasas_register_set __iomem *);
irqreturn_t (*service_isr)(int irq, void *devp);
void (*tasklet)(unsigned long);
u32 (*init_adapter)(struct megasas_instance *);
u32 (*build_and_issue_cmd) (struct megasas_instance *,
struct scsi_cmnd *);
void (*issue_dcmd) (struct megasas_instance *instance,
struct megasas_cmd *cmd);
};
#define MEGASAS_IS_LOGICAL(scp) \
(scp->device->channel < MEGASAS_MAX_PD_CHANNELS) ? 0 : 1
#define MEGASAS_DEV_INDEX(inst, scp) \
((scp->device->channel % 2) * MEGASAS_MAX_DEV_PER_CHANNEL) + \
scp->device->id
struct megasas_cmd {
union megasas_frame *frame;
dma_addr_t frame_phys_addr;
u8 *sense;
dma_addr_t sense_phys_addr;
u32 index;
u8 sync_cmd;
u8 cmd_status;
u8 abort_aen;
u8 retry_for_fw_reset;
struct list_head list;
struct scsi_cmnd *scmd;
void *mpt_pthr_cmd_blocked;
atomic_t mfi_mpt_pthr;
u8 is_wait_event;
struct megasas_instance *instance;
union {
struct {
u16 smid;
u16 resvd;
} context;
u32 frame_count;
};
};
#define MAX_MGMT_ADAPTERS 1024
#define MAX_IOCTL_SGE 16
struct megasas_iocpacket {
u16 host_no;
u16 __pad1;
u32 sgl_off;
u32 sge_count;
u32 sense_off;
u32 sense_len;
union {
u8 raw[128];
struct megasas_header hdr;
} frame;
struct iovec sgl[MAX_IOCTL_SGE];
} __attribute__ ((packed));
struct megasas_aen {
u16 host_no;
u16 __pad1;
u32 seq_num;
u32 class_locale_word;
} __attribute__ ((packed));
#ifdef CONFIG_COMPAT
struct compat_megasas_iocpacket {
u16 host_no;
u16 __pad1;
u32 sgl_off;
u32 sge_count;
u32 sense_off;
u32 sense_len;
union {
u8 raw[128];
struct megasas_header hdr;
} frame;
struct compat_iovec sgl[MAX_IOCTL_SGE];
} __attribute__ ((packed));
#define MEGASAS_IOC_FIRMWARE32 _IOWR('M', 1, struct compat_megasas_iocpacket)
#endif
#define MEGASAS_IOC_FIRMWARE _IOWR('M', 1, struct megasas_iocpacket)
#define MEGASAS_IOC_GET_AEN _IOW('M', 3, struct megasas_aen)
struct megasas_mgmt_info {
u16 count;
struct megasas_instance *instance[MAX_MGMT_ADAPTERS];
int max_index;
};
u8
MR_BuildRaidContext(struct megasas_instance *instance,
struct IO_REQUEST_INFO *io_info,
struct RAID_CONTEXT *pRAID_Context,
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
struct MR_DRV_RAID_MAP_ALL *map, u8 **raidLUN);
u8 MR_TargetIdToLdGet(u32 ldTgtId, struct MR_DRV_RAID_MAP_ALL *map);
struct MR_LD_RAID *MR_LdRaidGet(u32 ld, struct MR_DRV_RAID_MAP_ALL *map);
u16 MR_ArPdGet(u32 ar, u32 arm, struct MR_DRV_RAID_MAP_ALL *map);
u16 MR_LdSpanArrayGet(u32 ld, u32 span, struct MR_DRV_RAID_MAP_ALL *map);
u16 MR_PdDevHandleGet(u32 pd, struct MR_DRV_RAID_MAP_ALL *map);
u16 MR_GetLDTgtId(u32 ld, struct MR_DRV_RAID_MAP_ALL *map);
u16 get_updated_dev_handle(struct megasas_instance *instance,
struct LD_LOAD_BALANCE_INFO *lbInfo, struct IO_REQUEST_INFO *in_info);
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
void mr_update_load_balance_params(struct MR_DRV_RAID_MAP_ALL *map,
struct LD_LOAD_BALANCE_INFO *lbInfo);
int megasas_get_ctrl_info(struct megasas_instance *instance);
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
int megasas_set_crash_dump_params(struct megasas_instance *instance,
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
u8 crash_buf_state);
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
void megasas_free_host_crash_buffer(struct megasas_instance *instance);
void megasas_fusion_crash_dump_wq(struct work_struct *work);
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
void megasas_return_cmd_fusion(struct megasas_instance *instance,
struct megasas_cmd_fusion *cmd);
int megasas_issue_blocked_cmd(struct megasas_instance *instance,
struct megasas_cmd *cmd, int timeout);
void __megasas_return_cmd(struct megasas_instance *instance,
struct megasas_cmd *cmd);
void megasas_return_mfi_mpt_pthr(struct megasas_instance *instance,
struct megasas_cmd *cmd_mfi, struct megasas_cmd_fusion *cmd_fusion);
#endif /*LSI_MEGARAID_SAS_H */