linux/drivers/net/ieee802154/at86rf230.c

1287 lines
30 KiB
C
Raw Normal View History

/*
* AT86RF230/RF231 driver
*
* Copyright (C) 2009-2012 Siemens AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Written by:
* Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
* Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>
#include <linux/spinlock.h>
#include <linux/spi/spi.h>
#include <linux/spi/at86rf230.h>
#include <linux/skbuff.h>
#include <linux/of_gpio.h>
#include <net/mac802154.h>
#include <net/wpan-phy.h>
struct at86rf230_local {
struct spi_device *spi;
u8 part;
u8 vers;
u8 buf[2];
struct mutex bmux;
struct work_struct irqwork;
struct completion tx_complete;
struct ieee802154_dev *dev;
spinlock_t lock;
bool irq_busy;
bool is_tx;
bool tx_aret;
int rssi_base_val;
};
static bool is_rf212(struct at86rf230_local *local)
{
return local->part == 7;
}
#define RG_TRX_STATUS (0x01)
#define SR_TRX_STATUS 0x01, 0x1f, 0
#define SR_RESERVED_01_3 0x01, 0x20, 5
#define SR_CCA_STATUS 0x01, 0x40, 6
#define SR_CCA_DONE 0x01, 0x80, 7
#define RG_TRX_STATE (0x02)
#define SR_TRX_CMD 0x02, 0x1f, 0
#define SR_TRAC_STATUS 0x02, 0xe0, 5
#define RG_TRX_CTRL_0 (0x03)
#define SR_CLKM_CTRL 0x03, 0x07, 0
#define SR_CLKM_SHA_SEL 0x03, 0x08, 3
#define SR_PAD_IO_CLKM 0x03, 0x30, 4
#define SR_PAD_IO 0x03, 0xc0, 6
#define RG_TRX_CTRL_1 (0x04)
#define SR_IRQ_POLARITY 0x04, 0x01, 0
#define SR_IRQ_MASK_MODE 0x04, 0x02, 1
#define SR_SPI_CMD_MODE 0x04, 0x0c, 2
#define SR_RX_BL_CTRL 0x04, 0x10, 4
#define SR_TX_AUTO_CRC_ON 0x04, 0x20, 5
#define SR_IRQ_2_EXT_EN 0x04, 0x40, 6
#define SR_PA_EXT_EN 0x04, 0x80, 7
#define RG_PHY_TX_PWR (0x05)
#define SR_TX_PWR 0x05, 0x0f, 0
#define SR_PA_LT 0x05, 0x30, 4
#define SR_PA_BUF_LT 0x05, 0xc0, 6
#define RG_PHY_RSSI (0x06)
#define SR_RSSI 0x06, 0x1f, 0
#define SR_RND_VALUE 0x06, 0x60, 5
#define SR_RX_CRC_VALID 0x06, 0x80, 7
#define RG_PHY_ED_LEVEL (0x07)
#define SR_ED_LEVEL 0x07, 0xff, 0
#define RG_PHY_CC_CCA (0x08)
#define SR_CHANNEL 0x08, 0x1f, 0
#define SR_CCA_MODE 0x08, 0x60, 5
#define SR_CCA_REQUEST 0x08, 0x80, 7
#define RG_CCA_THRES (0x09)
#define SR_CCA_ED_THRES 0x09, 0x0f, 0
#define SR_RESERVED_09_1 0x09, 0xf0, 4
#define RG_RX_CTRL (0x0a)
#define SR_PDT_THRES 0x0a, 0x0f, 0
#define SR_RESERVED_0a_1 0x0a, 0xf0, 4
#define RG_SFD_VALUE (0x0b)
#define SR_SFD_VALUE 0x0b, 0xff, 0
#define RG_TRX_CTRL_2 (0x0c)
#define SR_OQPSK_DATA_RATE 0x0c, 0x03, 0
#define SR_SUB_MODE 0x0c, 0x04, 2
#define SR_BPSK_QPSK 0x0c, 0x08, 3
#define SR_OQPSK_SUB1_RC_EN 0x0c, 0x10, 4
#define SR_RESERVED_0c_5 0x0c, 0x60, 5
#define SR_RX_SAFE_MODE 0x0c, 0x80, 7
#define RG_ANT_DIV (0x0d)
#define SR_ANT_CTRL 0x0d, 0x03, 0
#define SR_ANT_EXT_SW_EN 0x0d, 0x04, 2
#define SR_ANT_DIV_EN 0x0d, 0x08, 3
#define SR_RESERVED_0d_2 0x0d, 0x70, 4
#define SR_ANT_SEL 0x0d, 0x80, 7
#define RG_IRQ_MASK (0x0e)
#define SR_IRQ_MASK 0x0e, 0xff, 0
#define RG_IRQ_STATUS (0x0f)
#define SR_IRQ_0_PLL_LOCK 0x0f, 0x01, 0
#define SR_IRQ_1_PLL_UNLOCK 0x0f, 0x02, 1
#define SR_IRQ_2_RX_START 0x0f, 0x04, 2
#define SR_IRQ_3_TRX_END 0x0f, 0x08, 3
#define SR_IRQ_4_CCA_ED_DONE 0x0f, 0x10, 4
#define SR_IRQ_5_AMI 0x0f, 0x20, 5
#define SR_IRQ_6_TRX_UR 0x0f, 0x40, 6
#define SR_IRQ_7_BAT_LOW 0x0f, 0x80, 7
#define RG_VREG_CTRL (0x10)
#define SR_RESERVED_10_6 0x10, 0x03, 0
#define SR_DVDD_OK 0x10, 0x04, 2
#define SR_DVREG_EXT 0x10, 0x08, 3
#define SR_RESERVED_10_3 0x10, 0x30, 4
#define SR_AVDD_OK 0x10, 0x40, 6
#define SR_AVREG_EXT 0x10, 0x80, 7
#define RG_BATMON (0x11)
#define SR_BATMON_VTH 0x11, 0x0f, 0
#define SR_BATMON_HR 0x11, 0x10, 4
#define SR_BATMON_OK 0x11, 0x20, 5
#define SR_RESERVED_11_1 0x11, 0xc0, 6
#define RG_XOSC_CTRL (0x12)
#define SR_XTAL_TRIM 0x12, 0x0f, 0
#define SR_XTAL_MODE 0x12, 0xf0, 4
#define RG_RX_SYN (0x15)
#define SR_RX_PDT_LEVEL 0x15, 0x0f, 0
#define SR_RESERVED_15_2 0x15, 0x70, 4
#define SR_RX_PDT_DIS 0x15, 0x80, 7
#define RG_XAH_CTRL_1 (0x17)
#define SR_RESERVED_17_8 0x17, 0x01, 0
#define SR_AACK_PROM_MODE 0x17, 0x02, 1
#define SR_AACK_ACK_TIME 0x17, 0x04, 2
#define SR_RESERVED_17_5 0x17, 0x08, 3
#define SR_AACK_UPLD_RES_FT 0x17, 0x10, 4
#define SR_AACK_FLTR_RES_FT 0x17, 0x20, 5
#define SR_CSMA_LBT_MODE 0x17, 0x40, 6
#define SR_RESERVED_17_1 0x17, 0x80, 7
#define RG_FTN_CTRL (0x18)
#define SR_RESERVED_18_2 0x18, 0x7f, 0
#define SR_FTN_START 0x18, 0x80, 7
#define RG_PLL_CF (0x1a)
#define SR_RESERVED_1a_2 0x1a, 0x7f, 0
#define SR_PLL_CF_START 0x1a, 0x80, 7
#define RG_PLL_DCU (0x1b)
#define SR_RESERVED_1b_3 0x1b, 0x3f, 0
#define SR_RESERVED_1b_2 0x1b, 0x40, 6
#define SR_PLL_DCU_START 0x1b, 0x80, 7
#define RG_PART_NUM (0x1c)
#define SR_PART_NUM 0x1c, 0xff, 0
#define RG_VERSION_NUM (0x1d)
#define SR_VERSION_NUM 0x1d, 0xff, 0
#define RG_MAN_ID_0 (0x1e)
#define SR_MAN_ID_0 0x1e, 0xff, 0
#define RG_MAN_ID_1 (0x1f)
#define SR_MAN_ID_1 0x1f, 0xff, 0
#define RG_SHORT_ADDR_0 (0x20)
#define SR_SHORT_ADDR_0 0x20, 0xff, 0
#define RG_SHORT_ADDR_1 (0x21)
#define SR_SHORT_ADDR_1 0x21, 0xff, 0
#define RG_PAN_ID_0 (0x22)
#define SR_PAN_ID_0 0x22, 0xff, 0
#define RG_PAN_ID_1 (0x23)
#define SR_PAN_ID_1 0x23, 0xff, 0
#define RG_IEEE_ADDR_0 (0x24)
#define SR_IEEE_ADDR_0 0x24, 0xff, 0
#define RG_IEEE_ADDR_1 (0x25)
#define SR_IEEE_ADDR_1 0x25, 0xff, 0
#define RG_IEEE_ADDR_2 (0x26)
#define SR_IEEE_ADDR_2 0x26, 0xff, 0
#define RG_IEEE_ADDR_3 (0x27)
#define SR_IEEE_ADDR_3 0x27, 0xff, 0
#define RG_IEEE_ADDR_4 (0x28)
#define SR_IEEE_ADDR_4 0x28, 0xff, 0
#define RG_IEEE_ADDR_5 (0x29)
#define SR_IEEE_ADDR_5 0x29, 0xff, 0
#define RG_IEEE_ADDR_6 (0x2a)
#define SR_IEEE_ADDR_6 0x2a, 0xff, 0
#define RG_IEEE_ADDR_7 (0x2b)
#define SR_IEEE_ADDR_7 0x2b, 0xff, 0
#define RG_XAH_CTRL_0 (0x2c)
#define SR_SLOTTED_OPERATION 0x2c, 0x01, 0
#define SR_MAX_CSMA_RETRIES 0x2c, 0x0e, 1
#define SR_MAX_FRAME_RETRIES 0x2c, 0xf0, 4
#define RG_CSMA_SEED_0 (0x2d)
#define SR_CSMA_SEED_0 0x2d, 0xff, 0
#define RG_CSMA_SEED_1 (0x2e)
#define SR_CSMA_SEED_1 0x2e, 0x07, 0
#define SR_AACK_I_AM_COORD 0x2e, 0x08, 3
#define SR_AACK_DIS_ACK 0x2e, 0x10, 4
#define SR_AACK_SET_PD 0x2e, 0x20, 5
#define SR_AACK_FVN_MODE 0x2e, 0xc0, 6
#define RG_CSMA_BE (0x2f)
#define SR_MIN_BE 0x2f, 0x0f, 0
#define SR_MAX_BE 0x2f, 0xf0, 4
#define CMD_REG 0x80
#define CMD_REG_MASK 0x3f
#define CMD_WRITE 0x40
#define CMD_FB 0x20
#define IRQ_BAT_LOW (1 << 7)
#define IRQ_TRX_UR (1 << 6)
#define IRQ_AMI (1 << 5)
#define IRQ_CCA_ED (1 << 4)
#define IRQ_TRX_END (1 << 3)
#define IRQ_RX_START (1 << 2)
#define IRQ_PLL_UNL (1 << 1)
#define IRQ_PLL_LOCK (1 << 0)
#define IRQ_ACTIVE_HIGH 0
#define IRQ_ACTIVE_LOW 1
#define STATE_P_ON 0x00 /* BUSY */
#define STATE_BUSY_RX 0x01
#define STATE_BUSY_TX 0x02
#define STATE_FORCE_TRX_OFF 0x03
#define STATE_FORCE_TX_ON 0x04 /* IDLE */
/* 0x05 */ /* INVALID_PARAMETER */
#define STATE_RX_ON 0x06
/* 0x07 */ /* SUCCESS */
#define STATE_TRX_OFF 0x08
#define STATE_TX_ON 0x09
/* 0x0a - 0x0e */ /* 0x0a - UNSUPPORTED_ATTRIBUTE */
#define STATE_SLEEP 0x0F
#define STATE_PREP_DEEP_SLEEP 0x10
#define STATE_BUSY_RX_AACK 0x11
#define STATE_BUSY_TX_ARET 0x12
#define STATE_RX_AACK_ON 0x16
#define STATE_TX_ARET_ON 0x19
#define STATE_RX_ON_NOCLK 0x1C
#define STATE_RX_AACK_ON_NOCLK 0x1D
#define STATE_BUSY_RX_AACK_NOCLK 0x1E
#define STATE_TRANSITION_IN_PROGRESS 0x1F
static int
__at86rf230_detect_device(struct spi_device *spi, u16 *man_id, u8 *part,
u8 *version)
{
u8 data[4];
u8 *buf = kmalloc(2, GFP_KERNEL);
int status;
struct spi_message msg;
struct spi_transfer xfer = {
.len = 2,
.tx_buf = buf,
.rx_buf = buf,
};
u8 reg;
if (!buf)
return -ENOMEM;
for (reg = RG_PART_NUM; reg <= RG_MAN_ID_1; reg++) {
buf[0] = (reg & CMD_REG_MASK) | CMD_REG;
buf[1] = 0xff;
dev_vdbg(&spi->dev, "buf[0] = %02x\n", buf[0]);
spi_message_init(&msg);
spi_message_add_tail(&xfer, &msg);
status = spi_sync(spi, &msg);
dev_vdbg(&spi->dev, "status = %d\n", status);
if (msg.status)
status = msg.status;
dev_vdbg(&spi->dev, "status = %d\n", status);
dev_vdbg(&spi->dev, "buf[0] = %02x\n", buf[0]);
dev_vdbg(&spi->dev, "buf[1] = %02x\n", buf[1]);
if (status == 0)
data[reg - RG_PART_NUM] = buf[1];
else
break;
}
if (status == 0) {
*part = data[0];
*version = data[1];
*man_id = (data[3] << 8) | data[2];
}
kfree(buf);
return status;
}
static int
__at86rf230_write(struct at86rf230_local *lp, u8 addr, u8 data)
{
u8 *buf = lp->buf;
int status;
struct spi_message msg;
struct spi_transfer xfer = {
.len = 2,
.tx_buf = buf,
};
buf[0] = (addr & CMD_REG_MASK) | CMD_REG | CMD_WRITE;
buf[1] = data;
dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
spi_message_init(&msg);
spi_message_add_tail(&xfer, &msg);
status = spi_sync(lp->spi, &msg);
dev_vdbg(&lp->spi->dev, "status = %d\n", status);
if (msg.status)
status = msg.status;
dev_vdbg(&lp->spi->dev, "status = %d\n", status);
dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
return status;
}
static int
__at86rf230_read_subreg(struct at86rf230_local *lp,
u8 addr, u8 mask, int shift, u8 *data)
{
u8 *buf = lp->buf;
int status;
struct spi_message msg;
struct spi_transfer xfer = {
.len = 2,
.tx_buf = buf,
.rx_buf = buf,
};
buf[0] = (addr & CMD_REG_MASK) | CMD_REG;
buf[1] = 0xff;
dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
spi_message_init(&msg);
spi_message_add_tail(&xfer, &msg);
status = spi_sync(lp->spi, &msg);
dev_vdbg(&lp->spi->dev, "status = %d\n", status);
if (msg.status)
status = msg.status;
dev_vdbg(&lp->spi->dev, "status = %d\n", status);
dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
if (status == 0)
*data = (buf[1] & mask) >> shift;
return status;
}
static int
at86rf230_read_subreg(struct at86rf230_local *lp,
u8 addr, u8 mask, int shift, u8 *data)
{
int status;
mutex_lock(&lp->bmux);
status = __at86rf230_read_subreg(lp, addr, mask, shift, data);
mutex_unlock(&lp->bmux);
return status;
}
static int
at86rf230_write_subreg(struct at86rf230_local *lp,
u8 addr, u8 mask, int shift, u8 data)
{
int status;
u8 val;
mutex_lock(&lp->bmux);
status = __at86rf230_read_subreg(lp, addr, 0xff, 0, &val);
if (status)
goto out;
val &= ~mask;
val |= (data << shift) & mask;
status = __at86rf230_write(lp, addr, val);
out:
mutex_unlock(&lp->bmux);
return status;
}
static int
at86rf230_write_fbuf(struct at86rf230_local *lp, u8 *data, u8 len)
{
u8 *buf = lp->buf;
int status;
struct spi_message msg;
struct spi_transfer xfer_head = {
.len = 2,
.tx_buf = buf,
};
struct spi_transfer xfer_buf = {
.len = len,
.tx_buf = data,
};
mutex_lock(&lp->bmux);
buf[0] = CMD_WRITE | CMD_FB;
buf[1] = len + 2; /* 2 bytes for CRC that isn't written */
dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
spi_message_init(&msg);
spi_message_add_tail(&xfer_head, &msg);
spi_message_add_tail(&xfer_buf, &msg);
status = spi_sync(lp->spi, &msg);
dev_vdbg(&lp->spi->dev, "status = %d\n", status);
if (msg.status)
status = msg.status;
dev_vdbg(&lp->spi->dev, "status = %d\n", status);
dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
mutex_unlock(&lp->bmux);
return status;
}
static int
at86rf230_read_fbuf(struct at86rf230_local *lp, u8 *data, u8 *len, u8 *lqi)
{
u8 *buf = lp->buf;
int status;
struct spi_message msg;
struct spi_transfer xfer_head = {
.len = 2,
.tx_buf = buf,
.rx_buf = buf,
};
struct spi_transfer xfer_head1 = {
.len = 2,
.tx_buf = buf,
.rx_buf = buf,
};
struct spi_transfer xfer_buf = {
.len = 0,
.rx_buf = data,
};
mutex_lock(&lp->bmux);
buf[0] = CMD_FB;
buf[1] = 0x00;
spi_message_init(&msg);
spi_message_add_tail(&xfer_head, &msg);
status = spi_sync(lp->spi, &msg);
dev_vdbg(&lp->spi->dev, "status = %d\n", status);
xfer_buf.len = *(buf + 1) + 1;
*len = buf[1];
buf[0] = CMD_FB;
buf[1] = 0x00;
spi_message_init(&msg);
spi_message_add_tail(&xfer_head1, &msg);
spi_message_add_tail(&xfer_buf, &msg);
status = spi_sync(lp->spi, &msg);
if (msg.status)
status = msg.status;
dev_vdbg(&lp->spi->dev, "status = %d\n", status);
dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
if (status) {
if (lqi && (*len > lp->buf[1]))
*lqi = data[lp->buf[1]];
}
mutex_unlock(&lp->bmux);
return status;
}
static int
at86rf230_ed(struct ieee802154_dev *dev, u8 *level)
{
might_sleep();
BUG_ON(!level);
*level = 0xbe;
return 0;
}
static int
at86rf230_state(struct ieee802154_dev *dev, int state)
{
struct at86rf230_local *lp = dev->priv;
int rc;
u8 val;
u8 desired_status;
might_sleep();
if (state == STATE_FORCE_TX_ON)
desired_status = STATE_TX_ON;
else if (state == STATE_FORCE_TRX_OFF)
desired_status = STATE_TRX_OFF;
else
desired_status = state;
do {
rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &val);
if (rc)
goto err;
} while (val == STATE_TRANSITION_IN_PROGRESS);
if (val == desired_status)
return 0;
/* state is equal to phy states */
rc = at86rf230_write_subreg(lp, SR_TRX_CMD, state);
if (rc)
goto err;
do {
rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &val);
if (rc)
goto err;
} while (val == STATE_TRANSITION_IN_PROGRESS);
if (val == desired_status ||
(desired_status == STATE_RX_ON && val == STATE_BUSY_RX) ||
(desired_status == STATE_RX_AACK_ON && val == STATE_BUSY_RX_AACK))
return 0;
pr_err("unexpected state change: %d, asked for %d\n", val, state);
return -EBUSY;
err:
pr_err("error: %d\n", rc);
return rc;
}
static int
at86rf230_start(struct ieee802154_dev *dev)
{
struct at86rf230_local *lp = dev->priv;
u8 rc;
rc = at86rf230_write_subreg(lp, SR_RX_SAFE_MODE, 1);
if (rc)
return rc;
at86rf230: fix unexpected state change This patch fix a unexpected state change for the at86rf231 chip. We can't change into STATE_FORCE_TX_ON while the chip is in one of SLEEP, P_ON, RESET, TRX_OFF, and all *_NOCLK states. In this case we are in the TRX_OFF state. See datasheet [1] page 71 for more information. Without this patch you will get the following message on a at86rf231 device: [ 20.065218] unexpected state change: 8, asked for 4 [ 20.070527] ------------[ cut here ]------------ [ 20.075414] WARNING: CPU: 0 PID: 160 at net/mac802154/ieee802154_dev.c:43 mac802154_slave_open+0x70/0xb8() [ 20.085594] Modules linked in: autofs4 [ 20.089667] CPU: 0 PID: 160 Comm: ifconfig Not tainted 3.14.0-20140108-1-00993-g905c192 #162 [ 20.098612] [<c00127b8>] (unwind_backtrace) from [<c0010b1c>] (show_stack+0x10/0x14) [ 20.106819] [<c0010b1c>] (show_stack) from [<c0033838>] (warn_slowpath_common+0x60/0x80) [ 20.115311] [<c0033838>] (warn_slowpath_common) from [<c00338e8>] (warn_slowpath_null+0x18/0x20) [ 20.124590] [<c00338e8>] (warn_slowpath_null) from [<c057b7e8>] (mac802154_slave_open+0x70/0xb8) [ 20.133880] [<c057b7e8>] (mac802154_slave_open) from [<c0488a58>] (__dev_open+0xa8/0x108) [ 20.142553] [<c0488a58>] (__dev_open) from [<c0488cb0>] (__dev_change_flags+0x8c/0x148) [ 20.151051] [<c0488cb0>] (__dev_change_flags) from [<c0488d84>] (dev_change_flags+0x18/0x48) [ 20.159968] [<c0488d84>] (dev_change_flags) from [<c04e2e9c>] (devinet_ioctl+0x2b0/0x63c) [ 20.168623] [<c04e2e9c>] (devinet_ioctl) from [<c04712e4>] (sock_ioctl+0x23c/0x29c) [ 20.176727] [<c04712e4>] (sock_ioctl) from [<c00e3cb8>] (do_vfs_ioctl+0x4a8/0x578) [ 20.184671] [<c00e3cb8>] (do_vfs_ioctl) from [<c00e3dd4>] (SyS_ioctl+0x4c/0x78) [ 20.192402] [<c00e3dd4>] (SyS_ioctl) from [<c000da00>] (ret_fast_syscall+0x0/0x48) [ 20.200392] ---[ end trace 9a34542f4ea08e47 ]--- This patch was tested on at86rf231 and at86rf212. [1] http://www.atmel.com/images/doc8111.pdf Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 16:29:03 +08:00
rc = at86rf230_state(dev, STATE_TX_ON);
if (rc)
return rc;
return at86rf230_state(dev, STATE_RX_AACK_ON);
}
static void
at86rf230_stop(struct ieee802154_dev *dev)
{
at86rf230_state(dev, STATE_FORCE_TRX_OFF);
}
static int
at86rf230_set_channel(struct at86rf230_local *lp, int page, int channel)
{
lp->rssi_base_val = -91;
return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
}
static int
at86rf212_set_channel(struct at86rf230_local *lp, int page, int channel)
{
int rc;
if (channel == 0)
rc = at86rf230_write_subreg(lp, SR_SUB_MODE, 0);
else
rc = at86rf230_write_subreg(lp, SR_SUB_MODE, 1);
if (rc < 0)
return rc;
if (page == 0) {
rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 0);
lp->rssi_base_val = -100;
} else {
rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 1);
lp->rssi_base_val = -98;
}
if (rc < 0)
return rc;
return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
}
static int
at86rf230_channel(struct ieee802154_dev *dev, int page, int channel)
{
struct at86rf230_local *lp = dev->priv;
int rc;
might_sleep();
if (page < 0 || page > 31 ||
!(lp->dev->phy->channels_supported[page] & BIT(channel))) {
WARN_ON(1);
return -EINVAL;
}
if (is_rf212(lp))
rc = at86rf212_set_channel(lp, page, channel);
else
rc = at86rf230_set_channel(lp, page, channel);
if (rc < 0)
return rc;
msleep(1); /* Wait for PLL */
dev->phy->current_channel = channel;
dev->phy->current_page = page;
return 0;
}
static int
at86rf230_xmit(struct ieee802154_dev *dev, struct sk_buff *skb)
{
struct at86rf230_local *lp = dev->priv;
int rc;
unsigned long flags;
at86rf230: fix lockdep splats This patch fix a lockdep in the at86rf230 driver, otherwise we get: [ 30.206517] ================================= [ 30.211078] [ INFO: inconsistent lock state ] [ 30.215647] 3.14.0-20140108-1-00994-g32e9426 #163 Not tainted [ 30.221660] --------------------------------- [ 30.226222] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 30.232514] systemd-udevd/157 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 30.238439] (&(&lp->lock)->rlock){?.+...}, at: [<c03600f8>] at86rf230_isr+0x18/0x44 [ 30.246621] {HARDIRQ-ON-W} state was registered at: [ 30.251728] [<c0061ce4>] __lock_acquire+0x7a4/0x18d8 [ 30.257135] [<c0063500>] lock_acquire+0x68/0x7c [ 30.262071] [<c0588820>] _raw_spin_lock+0x28/0x38 [ 30.267203] [<c0361240>] at86rf230_xmit+0x1c/0x144 [ 30.272412] [<c057ba6c>] mac802154_xmit_worker+0x88/0x148 [ 30.278271] [<c0047844>] process_one_work+0x274/0x404 [ 30.283761] [<c00484c0>] worker_thread+0x228/0x374 [ 30.288971] [<c004cfb8>] kthread+0xd0/0xe4 [ 30.293455] [<c000dac8>] ret_from_fork+0x14/0x2c [ 30.298493] irq event stamp: 8948 [ 30.301963] hardirqs last enabled at (8947): [<c00cb290>] __kmalloc+0xb4/0x110 [ 30.309636] hardirqs last disabled at (8948): [<c00115d4>] __irq_svc+0x34/0x5c [ 30.317215] softirqs last enabled at (8452): [<c0037324>] __do_softirq+0x1dc/0x264 [ 30.325243] softirqs last disabled at (8439): [<c0037638>] irq_exit+0x80/0xf4 We use the lp->lock inside the isr of at86rf230, that's why we need the irqsave spinlock calls. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12 15:21:24 +08:00
spin_lock_irqsave(&lp->lock, flags);
if (lp->irq_busy) {
at86rf230: fix lockdep splats This patch fix a lockdep in the at86rf230 driver, otherwise we get: [ 30.206517] ================================= [ 30.211078] [ INFO: inconsistent lock state ] [ 30.215647] 3.14.0-20140108-1-00994-g32e9426 #163 Not tainted [ 30.221660] --------------------------------- [ 30.226222] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 30.232514] systemd-udevd/157 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 30.238439] (&(&lp->lock)->rlock){?.+...}, at: [<c03600f8>] at86rf230_isr+0x18/0x44 [ 30.246621] {HARDIRQ-ON-W} state was registered at: [ 30.251728] [<c0061ce4>] __lock_acquire+0x7a4/0x18d8 [ 30.257135] [<c0063500>] lock_acquire+0x68/0x7c [ 30.262071] [<c0588820>] _raw_spin_lock+0x28/0x38 [ 30.267203] [<c0361240>] at86rf230_xmit+0x1c/0x144 [ 30.272412] [<c057ba6c>] mac802154_xmit_worker+0x88/0x148 [ 30.278271] [<c0047844>] process_one_work+0x274/0x404 [ 30.283761] [<c00484c0>] worker_thread+0x228/0x374 [ 30.288971] [<c004cfb8>] kthread+0xd0/0xe4 [ 30.293455] [<c000dac8>] ret_from_fork+0x14/0x2c [ 30.298493] irq event stamp: 8948 [ 30.301963] hardirqs last enabled at (8947): [<c00cb290>] __kmalloc+0xb4/0x110 [ 30.309636] hardirqs last disabled at (8948): [<c00115d4>] __irq_svc+0x34/0x5c [ 30.317215] softirqs last enabled at (8452): [<c0037324>] __do_softirq+0x1dc/0x264 [ 30.325243] softirqs last disabled at (8439): [<c0037638>] irq_exit+0x80/0xf4 We use the lp->lock inside the isr of at86rf230, that's why we need the irqsave spinlock calls. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12 15:21:24 +08:00
spin_unlock_irqrestore(&lp->lock, flags);
return -EBUSY;
}
at86rf230: fix lockdep splats This patch fix a lockdep in the at86rf230 driver, otherwise we get: [ 30.206517] ================================= [ 30.211078] [ INFO: inconsistent lock state ] [ 30.215647] 3.14.0-20140108-1-00994-g32e9426 #163 Not tainted [ 30.221660] --------------------------------- [ 30.226222] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 30.232514] systemd-udevd/157 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 30.238439] (&(&lp->lock)->rlock){?.+...}, at: [<c03600f8>] at86rf230_isr+0x18/0x44 [ 30.246621] {HARDIRQ-ON-W} state was registered at: [ 30.251728] [<c0061ce4>] __lock_acquire+0x7a4/0x18d8 [ 30.257135] [<c0063500>] lock_acquire+0x68/0x7c [ 30.262071] [<c0588820>] _raw_spin_lock+0x28/0x38 [ 30.267203] [<c0361240>] at86rf230_xmit+0x1c/0x144 [ 30.272412] [<c057ba6c>] mac802154_xmit_worker+0x88/0x148 [ 30.278271] [<c0047844>] process_one_work+0x274/0x404 [ 30.283761] [<c00484c0>] worker_thread+0x228/0x374 [ 30.288971] [<c004cfb8>] kthread+0xd0/0xe4 [ 30.293455] [<c000dac8>] ret_from_fork+0x14/0x2c [ 30.298493] irq event stamp: 8948 [ 30.301963] hardirqs last enabled at (8947): [<c00cb290>] __kmalloc+0xb4/0x110 [ 30.309636] hardirqs last disabled at (8948): [<c00115d4>] __irq_svc+0x34/0x5c [ 30.317215] softirqs last enabled at (8452): [<c0037324>] __do_softirq+0x1dc/0x264 [ 30.325243] softirqs last disabled at (8439): [<c0037638>] irq_exit+0x80/0xf4 We use the lp->lock inside the isr of at86rf230, that's why we need the irqsave spinlock calls. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12 15:21:24 +08:00
spin_unlock_irqrestore(&lp->lock, flags);
might_sleep();
rc = at86rf230_state(dev, STATE_FORCE_TX_ON);
if (rc)
goto err;
spin_lock_irqsave(&lp->lock, flags);
lp->is_tx = 1;
reinit_completion(&lp->tx_complete);
spin_unlock_irqrestore(&lp->lock, flags);
rc = at86rf230_write_fbuf(lp, skb->data, skb->len);
if (rc)
goto err_rx;
if (lp->tx_aret) {
rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_TX_ARET_ON);
if (rc)
goto err_rx;
}
rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_BUSY_TX);
if (rc)
goto err_rx;
rc = wait_for_completion_interruptible(&lp->tx_complete);
if (rc < 0)
goto err_rx;
rc = at86rf230_start(dev);
return rc;
err_rx:
at86rf230_start(dev);
err:
pr_err("error: %d\n", rc);
spin_lock_irqsave(&lp->lock, flags);
lp->is_tx = 0;
spin_unlock_irqrestore(&lp->lock, flags);
return rc;
}
static int at86rf230_rx(struct at86rf230_local *lp)
{
u8 len = 128, lqi = 0;
struct sk_buff *skb;
skb = alloc_skb(len, GFP_KERNEL);
if (!skb)
return -ENOMEM;
if (at86rf230_read_fbuf(lp, skb_put(skb, len), &len, &lqi))
goto err;
if (len < 2)
goto err;
skb_trim(skb, len - 2); /* We do not put CRC into the frame */
ieee802154_rx_irqsafe(lp->dev, skb, lqi);
dev_dbg(&lp->spi->dev, "READ_FBUF: %d %x\n", len, lqi);
return 0;
err:
pr_debug("received frame is too small\n");
kfree_skb(skb);
return -EINVAL;
}
static int
at86rf230_set_hw_addr_filt(struct ieee802154_dev *dev,
struct ieee802154_hw_addr_filt *filt,
unsigned long changed)
{
struct at86rf230_local *lp = dev->priv;
if (changed & IEEE802515_AFILT_SADDR_CHANGED) {
u16 addr = le16_to_cpu(filt->short_addr);
dev_vdbg(&lp->spi->dev,
"at86rf230_set_hw_addr_filt called for saddr\n");
__at86rf230_write(lp, RG_SHORT_ADDR_0, addr);
__at86rf230_write(lp, RG_SHORT_ADDR_1, addr >> 8);
}
if (changed & IEEE802515_AFILT_PANID_CHANGED) {
u16 pan = le16_to_cpu(filt->pan_id);
dev_vdbg(&lp->spi->dev,
"at86rf230_set_hw_addr_filt called for pan id\n");
__at86rf230_write(lp, RG_PAN_ID_0, pan);
__at86rf230_write(lp, RG_PAN_ID_1, pan >> 8);
}
if (changed & IEEE802515_AFILT_IEEEADDR_CHANGED) {
u8 i, addr[8];
memcpy(addr, &filt->ieee_addr, 8);
dev_vdbg(&lp->spi->dev,
"at86rf230_set_hw_addr_filt called for IEEE addr\n");
for (i = 0; i < 8; i++)
__at86rf230_write(lp, RG_IEEE_ADDR_0 + i, addr[i]);
}
if (changed & IEEE802515_AFILT_PANC_CHANGED) {
dev_vdbg(&lp->spi->dev,
"at86rf230_set_hw_addr_filt called for panc change\n");
if (filt->pan_coord)
at86rf230_write_subreg(lp, SR_AACK_I_AM_COORD, 1);
else
at86rf230_write_subreg(lp, SR_AACK_I_AM_COORD, 0);
}
return 0;
}
static int
at86rf212_set_txpower(struct ieee802154_dev *dev, int db)
{
struct at86rf230_local *lp = dev->priv;
/* typical maximum output is 5dBm with RG_PHY_TX_PWR 0x60, lower five
* bits decrease power in 1dB steps. 0x60 represents extra PA gain of
* 0dB.
* thus, supported values for db range from -26 to 5, for 31dB of
* reduction to 0dB of reduction.
*/
if (db > 5 || db < -26)
return -EINVAL;
db = -(db - 5);
return __at86rf230_write(lp, RG_PHY_TX_PWR, 0x60 | db);
}
static int
at86rf212_set_lbt(struct ieee802154_dev *dev, bool on)
{
struct at86rf230_local *lp = dev->priv;
return at86rf230_write_subreg(lp, SR_CSMA_LBT_MODE, on);
}
static int
at86rf212_set_cca_mode(struct ieee802154_dev *dev, u8 mode)
{
struct at86rf230_local *lp = dev->priv;
return at86rf230_write_subreg(lp, SR_CCA_MODE, mode);
}
static int
at86rf212_set_cca_ed_level(struct ieee802154_dev *dev, s32 level)
{
struct at86rf230_local *lp = dev->priv;
int desens_steps;
if (level < lp->rssi_base_val || level > 30)
return -EINVAL;
desens_steps = (level - lp->rssi_base_val) * 100 / 207;
return at86rf230_write_subreg(lp, SR_CCA_ED_THRES, desens_steps);
}
static int
at86rf212_set_csma_params(struct ieee802154_dev *dev, u8 min_be, u8 max_be,
u8 retries)
{
struct at86rf230_local *lp = dev->priv;
int rc;
if (min_be > max_be || max_be > 8 || retries > 5)
return -EINVAL;
rc = at86rf230_write_subreg(lp, SR_MIN_BE, min_be);
if (rc)
return rc;
rc = at86rf230_write_subreg(lp, SR_MAX_BE, max_be);
if (rc)
return rc;
return at86rf230_write_subreg(lp, SR_MAX_CSMA_RETRIES, retries);
}
static int
at86rf212_set_frame_retries(struct ieee802154_dev *dev, s8 retries)
{
struct at86rf230_local *lp = dev->priv;
int rc = 0;
if (retries < -1 || retries > 15)
return -EINVAL;
lp->tx_aret = retries >= 0;
if (retries >= 0)
rc = at86rf230_write_subreg(lp, SR_MAX_FRAME_RETRIES, retries);
return rc;
}
static struct ieee802154_ops at86rf230_ops = {
.owner = THIS_MODULE,
.xmit = at86rf230_xmit,
.ed = at86rf230_ed,
.set_channel = at86rf230_channel,
.start = at86rf230_start,
.stop = at86rf230_stop,
.set_hw_addr_filt = at86rf230_set_hw_addr_filt,
};
static struct ieee802154_ops at86rf212_ops = {
.owner = THIS_MODULE,
.xmit = at86rf230_xmit,
.ed = at86rf230_ed,
.set_channel = at86rf230_channel,
.start = at86rf230_start,
.stop = at86rf230_stop,
.set_hw_addr_filt = at86rf230_set_hw_addr_filt,
.set_txpower = at86rf212_set_txpower,
.set_lbt = at86rf212_set_lbt,
.set_cca_mode = at86rf212_set_cca_mode,
.set_cca_ed_level = at86rf212_set_cca_ed_level,
.set_csma_params = at86rf212_set_csma_params,
.set_frame_retries = at86rf212_set_frame_retries,
};
static void at86rf230_irqwork(struct work_struct *work)
{
struct at86rf230_local *lp =
container_of(work, struct at86rf230_local, irqwork);
u8 status = 0, val;
int rc;
unsigned long flags;
rc = at86rf230_read_subreg(lp, RG_IRQ_STATUS, 0xff, 0, &val);
status |= val;
status &= ~IRQ_PLL_LOCK; /* ignore */
status &= ~IRQ_RX_START; /* ignore */
status &= ~IRQ_AMI; /* ignore */
status &= ~IRQ_TRX_UR; /* FIXME: possibly handle ???*/
if (status & IRQ_TRX_END) {
status &= ~IRQ_TRX_END;
spin_lock_irqsave(&lp->lock, flags);
if (lp->is_tx) {
lp->is_tx = 0;
spin_unlock_irqrestore(&lp->lock, flags);
complete(&lp->tx_complete);
} else {
spin_unlock_irqrestore(&lp->lock, flags);
at86rf230_rx(lp);
}
}
spin_lock_irqsave(&lp->lock, flags);
lp->irq_busy = 0;
spin_unlock_irqrestore(&lp->lock, flags);
}
static void at86rf230_irqwork_level(struct work_struct *work)
{
struct at86rf230_local *lp =
container_of(work, struct at86rf230_local, irqwork);
at86rf230_irqwork(work);
enable_irq(lp->spi->irq);
}
static irqreturn_t at86rf230_isr(int irq, void *data)
{
struct at86rf230_local *lp = data;
at86rf230: fix lockdep splats This patch fix a lockdep in the at86rf230 driver, otherwise we get: [ 30.206517] ================================= [ 30.211078] [ INFO: inconsistent lock state ] [ 30.215647] 3.14.0-20140108-1-00994-g32e9426 #163 Not tainted [ 30.221660] --------------------------------- [ 30.226222] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 30.232514] systemd-udevd/157 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 30.238439] (&(&lp->lock)->rlock){?.+...}, at: [<c03600f8>] at86rf230_isr+0x18/0x44 [ 30.246621] {HARDIRQ-ON-W} state was registered at: [ 30.251728] [<c0061ce4>] __lock_acquire+0x7a4/0x18d8 [ 30.257135] [<c0063500>] lock_acquire+0x68/0x7c [ 30.262071] [<c0588820>] _raw_spin_lock+0x28/0x38 [ 30.267203] [<c0361240>] at86rf230_xmit+0x1c/0x144 [ 30.272412] [<c057ba6c>] mac802154_xmit_worker+0x88/0x148 [ 30.278271] [<c0047844>] process_one_work+0x274/0x404 [ 30.283761] [<c00484c0>] worker_thread+0x228/0x374 [ 30.288971] [<c004cfb8>] kthread+0xd0/0xe4 [ 30.293455] [<c000dac8>] ret_from_fork+0x14/0x2c [ 30.298493] irq event stamp: 8948 [ 30.301963] hardirqs last enabled at (8947): [<c00cb290>] __kmalloc+0xb4/0x110 [ 30.309636] hardirqs last disabled at (8948): [<c00115d4>] __irq_svc+0x34/0x5c [ 30.317215] softirqs last enabled at (8452): [<c0037324>] __do_softirq+0x1dc/0x264 [ 30.325243] softirqs last disabled at (8439): [<c0037638>] irq_exit+0x80/0xf4 We use the lp->lock inside the isr of at86rf230, that's why we need the irqsave spinlock calls. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12 15:21:24 +08:00
unsigned long flags;
at86rf230: fix lockdep splats This patch fix a lockdep in the at86rf230 driver, otherwise we get: [ 30.206517] ================================= [ 30.211078] [ INFO: inconsistent lock state ] [ 30.215647] 3.14.0-20140108-1-00994-g32e9426 #163 Not tainted [ 30.221660] --------------------------------- [ 30.226222] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 30.232514] systemd-udevd/157 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 30.238439] (&(&lp->lock)->rlock){?.+...}, at: [<c03600f8>] at86rf230_isr+0x18/0x44 [ 30.246621] {HARDIRQ-ON-W} state was registered at: [ 30.251728] [<c0061ce4>] __lock_acquire+0x7a4/0x18d8 [ 30.257135] [<c0063500>] lock_acquire+0x68/0x7c [ 30.262071] [<c0588820>] _raw_spin_lock+0x28/0x38 [ 30.267203] [<c0361240>] at86rf230_xmit+0x1c/0x144 [ 30.272412] [<c057ba6c>] mac802154_xmit_worker+0x88/0x148 [ 30.278271] [<c0047844>] process_one_work+0x274/0x404 [ 30.283761] [<c00484c0>] worker_thread+0x228/0x374 [ 30.288971] [<c004cfb8>] kthread+0xd0/0xe4 [ 30.293455] [<c000dac8>] ret_from_fork+0x14/0x2c [ 30.298493] irq event stamp: 8948 [ 30.301963] hardirqs last enabled at (8947): [<c00cb290>] __kmalloc+0xb4/0x110 [ 30.309636] hardirqs last disabled at (8948): [<c00115d4>] __irq_svc+0x34/0x5c [ 30.317215] softirqs last enabled at (8452): [<c0037324>] __do_softirq+0x1dc/0x264 [ 30.325243] softirqs last disabled at (8439): [<c0037638>] irq_exit+0x80/0xf4 We use the lp->lock inside the isr of at86rf230, that's why we need the irqsave spinlock calls. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12 15:21:24 +08:00
spin_lock_irqsave(&lp->lock, flags);
lp->irq_busy = 1;
at86rf230: fix lockdep splats This patch fix a lockdep in the at86rf230 driver, otherwise we get: [ 30.206517] ================================= [ 30.211078] [ INFO: inconsistent lock state ] [ 30.215647] 3.14.0-20140108-1-00994-g32e9426 #163 Not tainted [ 30.221660] --------------------------------- [ 30.226222] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 30.232514] systemd-udevd/157 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 30.238439] (&(&lp->lock)->rlock){?.+...}, at: [<c03600f8>] at86rf230_isr+0x18/0x44 [ 30.246621] {HARDIRQ-ON-W} state was registered at: [ 30.251728] [<c0061ce4>] __lock_acquire+0x7a4/0x18d8 [ 30.257135] [<c0063500>] lock_acquire+0x68/0x7c [ 30.262071] [<c0588820>] _raw_spin_lock+0x28/0x38 [ 30.267203] [<c0361240>] at86rf230_xmit+0x1c/0x144 [ 30.272412] [<c057ba6c>] mac802154_xmit_worker+0x88/0x148 [ 30.278271] [<c0047844>] process_one_work+0x274/0x404 [ 30.283761] [<c00484c0>] worker_thread+0x228/0x374 [ 30.288971] [<c004cfb8>] kthread+0xd0/0xe4 [ 30.293455] [<c000dac8>] ret_from_fork+0x14/0x2c [ 30.298493] irq event stamp: 8948 [ 30.301963] hardirqs last enabled at (8947): [<c00cb290>] __kmalloc+0xb4/0x110 [ 30.309636] hardirqs last disabled at (8948): [<c00115d4>] __irq_svc+0x34/0x5c [ 30.317215] softirqs last enabled at (8452): [<c0037324>] __do_softirq+0x1dc/0x264 [ 30.325243] softirqs last disabled at (8439): [<c0037638>] irq_exit+0x80/0xf4 We use the lp->lock inside the isr of at86rf230, that's why we need the irqsave spinlock calls. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12 15:21:24 +08:00
spin_unlock_irqrestore(&lp->lock, flags);
schedule_work(&lp->irqwork);
return IRQ_HANDLED;
}
static irqreturn_t at86rf230_isr_level(int irq, void *data)
{
disable_irq_nosync(irq);
return at86rf230_isr(irq, data);
}
static int at86rf230_irq_polarity(struct at86rf230_local *lp, int pol)
{
return at86rf230_write_subreg(lp, SR_IRQ_POLARITY, pol);
}
static int at86rf230_hw_init(struct at86rf230_local *lp)
{
struct at86rf230_platform_data *pdata = lp->spi->dev.platform_data;
int rc, irq_pol;
u8 status;
u8 csma_seed[2];
rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status);
if (rc)
return rc;
rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_FORCE_TRX_OFF);
if (rc)
return rc;
/* configure irq polarity, defaults to high active */
if (pdata->irq_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
irq_pol = IRQ_ACTIVE_LOW;
else
irq_pol = IRQ_ACTIVE_HIGH;
rc = at86rf230_irq_polarity(lp, irq_pol);
if (rc)
return rc;
rc = at86rf230_write_subreg(lp, SR_IRQ_MASK, IRQ_TRX_END);
if (rc)
return rc;
get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed));
rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]);
if (rc)
return rc;
rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_1, csma_seed[1]);
if (rc)
return rc;
/* CLKM changes are applied immediately */
rc = at86rf230_write_subreg(lp, SR_CLKM_SHA_SEL, 0x00);
if (rc)
return rc;
/* Turn CLKM Off */
rc = at86rf230_write_subreg(lp, SR_CLKM_CTRL, 0x00);
if (rc)
return rc;
/* Wait the next SLEEP cycle */
msleep(100);
rc = at86rf230_read_subreg(lp, SR_DVDD_OK, &status);
if (rc)
return rc;
if (!status) {
dev_err(&lp->spi->dev, "DVDD error\n");
return -EINVAL;
}
return 0;
}
static struct at86rf230_platform_data *
at86rf230_get_pdata(struct spi_device *spi)
{
struct at86rf230_platform_data *pdata;
const char *irq_type;
if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node)
return spi->dev.platform_data;
pdata = devm_kzalloc(&spi->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
goto done;
pdata->rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0);
pdata->slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0);
pdata->irq_type = IRQF_TRIGGER_RISING;
of_property_read_string(spi->dev.of_node, "irq-type", &irq_type);
if (!strcmp(irq_type, "level-high"))
pdata->irq_type = IRQF_TRIGGER_HIGH;
else if (!strcmp(irq_type, "level-low"))
pdata->irq_type = IRQF_TRIGGER_LOW;
else if (!strcmp(irq_type, "edge-rising"))
pdata->irq_type = IRQF_TRIGGER_RISING;
else if (!strcmp(irq_type, "edge-falling"))
pdata->irq_type = IRQF_TRIGGER_FALLING;
else
dev_warn(&spi->dev, "wrong irq-type specified using edge-rising\n");
spi->dev.platform_data = pdata;
done:
return pdata;
}
static int at86rf230_probe(struct spi_device *spi)
{
struct at86rf230_platform_data *pdata;
struct ieee802154_dev *dev;
struct at86rf230_local *lp;
u16 man_id = 0;
u8 part = 0, version = 0, status;
irq_handler_t irq_handler;
work_func_t irq_worker;
int rc;
const char *chip;
struct ieee802154_ops *ops = NULL;
if (!spi->irq) {
dev_err(&spi->dev, "no IRQ specified\n");
return -EINVAL;
}
pdata = at86rf230_get_pdata(spi);
if (!pdata) {
dev_err(&spi->dev, "no platform_data\n");
return -EINVAL;
}
if (gpio_is_valid(pdata->rstn)) {
rc = gpio_request(pdata->rstn, "rstn");
if (rc)
return rc;
}
if (gpio_is_valid(pdata->slp_tr)) {
rc = gpio_request(pdata->slp_tr, "slp_tr");
if (rc)
goto err_slp_tr;
}
if (gpio_is_valid(pdata->rstn)) {
rc = gpio_direction_output(pdata->rstn, 1);
if (rc)
goto err_gpio_dir;
}
if (gpio_is_valid(pdata->slp_tr)) {
rc = gpio_direction_output(pdata->slp_tr, 0);
if (rc)
goto err_gpio_dir;
}
/* Reset */
if (gpio_is_valid(pdata->rstn)) {
udelay(1);
gpio_set_value(pdata->rstn, 0);
udelay(1);
gpio_set_value(pdata->rstn, 1);
usleep_range(120, 240);
}
rc = __at86rf230_detect_device(spi, &man_id, &part, &version);
if (rc < 0)
goto err_gpio_dir;
if (man_id != 0x001f) {
dev_err(&spi->dev, "Non-Atmel dev found (MAN_ID %02x %02x)\n",
man_id >> 8, man_id & 0xFF);
rc = -EINVAL;
goto err_gpio_dir;
}
switch (part) {
case 2:
chip = "at86rf230";
/* FIXME: should be easy to support; */
break;
case 3:
chip = "at86rf231";
ops = &at86rf230_ops;
break;
case 7:
chip = "at86rf212";
if (version == 1)
ops = &at86rf212_ops;
break;
case 11:
chip = "at86rf233";
ops = &at86rf230_ops;
break;
default:
chip = "UNKNOWN";
break;
}
dev_info(&spi->dev, "Detected %s chip version %d\n", chip, version);
if (!ops) {
rc = -ENOTSUPP;
goto err_gpio_dir;
}
dev = ieee802154_alloc_device(sizeof(*lp), ops);
if (!dev) {
rc = -ENOMEM;
goto err_gpio_dir;
}
lp = dev->priv;
lp->dev = dev;
lp->part = part;
lp->vers = version;
lp->spi = spi;
dev->parent = &spi->dev;
dev->extra_tx_headroom = 0;
dev->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK;
if (pdata->irq_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
irq_worker = at86rf230_irqwork;
irq_handler = at86rf230_isr;
} else {
irq_worker = at86rf230_irqwork_level;
irq_handler = at86rf230_isr_level;
}
mutex_init(&lp->bmux);
INIT_WORK(&lp->irqwork, irq_worker);
spin_lock_init(&lp->lock);
init_completion(&lp->tx_complete);
spi_set_drvdata(spi, lp);
if (is_rf212(lp)) {
dev->phy->channels_supported[0] = 0x00007FF;
dev->phy->channels_supported[2] = 0x00007FF;
} else {
dev->phy->channels_supported[0] = 0x7FFF800;
}
rc = at86rf230_hw_init(lp);
if (rc)
goto err_hw_init;
rc = request_irq(spi->irq, irq_handler,
IRQF_SHARED | pdata->irq_type,
dev_name(&spi->dev), lp);
if (rc)
goto err_hw_init;
/* Read irq status register to reset irq line */
rc = at86rf230_read_subreg(lp, RG_IRQ_STATUS, 0xff, 0, &status);
if (rc)
goto err_irq;
rc = ieee802154_register_device(lp->dev);
if (rc)
goto err_irq;
return rc;
err_irq:
free_irq(spi->irq, lp);
err_hw_init:
flush_work(&lp->irqwork);
spi_set_drvdata(spi, NULL);
mutex_destroy(&lp->bmux);
ieee802154_free_device(lp->dev);
err_gpio_dir:
if (gpio_is_valid(pdata->slp_tr))
gpio_free(pdata->slp_tr);
err_slp_tr:
if (gpio_is_valid(pdata->rstn))
gpio_free(pdata->rstn);
return rc;
}
static int at86rf230_remove(struct spi_device *spi)
{
struct at86rf230_local *lp = spi_get_drvdata(spi);
struct at86rf230_platform_data *pdata = spi->dev.platform_data;
at86rf230: mask irq's before deregister device While transmit over a at86rf231 device and unloading the module I got: [ 29.643073] WARNING: CPU: 0 PID: 3 at kernel/workqueue.c:1335 __queue_work+0xb4/0x224() [ 29.651457] Modules linked in: at86rf230(-) autofs4 [ 29.656612] CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W 3.14.0-rc6-01602-g902659e-dirty #294 [ 29.666490] [<c00124f0>] (unwind_backtrace) from [<c0010ad0>] (show_stack+0x10/0x14) [ 29.674628] [<c0010ad0>] (show_stack) from [<c0032c80>] (warn_slowpath_common+0x60/0x80) [ 29.683116] [<c0032c80>] (warn_slowpath_common) from [<c0032d30>] (warn_slowpath_null+0x18/0x20) [ 29.692329] [<c0032d30>] (warn_slowpath_null) from [<c0045b08>] (__queue_work+0xb4/0x224) [ 29.700906] [<c0045b08>] (__queue_work) from [<c0045cc8>] (queue_work_on+0x50/0x78) [ 29.708944] [<c0045cc8>] (queue_work_on) from [<c05669cc>] (mac802154_tx+0x1e4/0x240) [ 29.717164] [<c05669cc>] (mac802154_tx) from [<c0471814>] (dev_hard_start_xmit+0x2f0/0x43c) [ 29.725926] [<c0471814>] (dev_hard_start_xmit) from [<c04878d0>] (sch_direct_xmit+0x64/0x2a0) [ 29.734867] [<c04878d0>] (sch_direct_xmit) from [<c0487c38>] (__qdisc_run+0x12c/0x18c) [ 29.743169] [<c0487c38>] (__qdisc_run) from [<c046e1b0>] (net_tx_action+0xe0/0x178) [ 29.751205] [<c046e1b0>] (net_tx_action) from [<c0036690>] (__do_softirq+0x100/0x264) [ 29.759420] [<c0036690>] (__do_softirq) from [<c0036818>] (run_ksoftirqd+0x24/0x4c) [ 29.767453] [<c0036818>] (run_ksoftirqd) from [<c005232c>] (smpboot_thread_fn+0x128/0x13c) [ 29.776121] [<c005232c>] (smpboot_thread_fn) from [<c004c3fc>] (kthread+0xd0/0xe4) [ 29.784061] [<c004c3fc>] (kthread) from [<c000da88>] (ret_from_fork+0x14/0x2c) [ 29.791628] ---[ end trace 3406ff24bd973834 ]--- The problem is there are still interrupts after deregister ieee802154 device. This patch mask all interrupts in the at86rf2xx chips before deregister the device. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-31 09:26:51 +08:00
/* mask all at86rf230 irq's */
at86rf230_write_subreg(lp, SR_IRQ_MASK, 0);
ieee802154_unregister_device(lp->dev);
free_irq(spi->irq, lp);
flush_work(&lp->irqwork);
if (gpio_is_valid(pdata->slp_tr))
gpio_free(pdata->slp_tr);
if (gpio_is_valid(pdata->rstn))
gpio_free(pdata->rstn);
mutex_destroy(&lp->bmux);
ieee802154_free_device(lp->dev);
dev_dbg(&spi->dev, "unregistered at86rf230\n");
return 0;
}
#if IS_ENABLED(CONFIG_OF)
static struct of_device_id at86rf230_of_match[] = {
{ .compatible = "atmel,at86rf230", },
{ .compatible = "atmel,at86rf231", },
{ .compatible = "atmel,at86rf233", },
{ .compatible = "atmel,at86rf212", },
{ },
};
#endif
static struct spi_driver at86rf230_driver = {
.driver = {
.of_match_table = of_match_ptr(at86rf230_of_match),
.name = "at86rf230",
.owner = THIS_MODULE,
},
.probe = at86rf230_probe,
.remove = at86rf230_remove,
};
module_spi_driver(at86rf230_driver);
MODULE_DESCRIPTION("AT86RF230 Transceiver Driver");
MODULE_LICENSE("GPL v2");