linux/drivers/usb/host/xhci-pci-renesas.c

646 lines
16 KiB
C
Raw Normal View History

usb: renesas-xhci: Add the renesas xhci driver This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recursion for renesas_fw_download add register defines and field names move to a separate file make fw loader as sync probe so that we execute in probe and prevent race make xhci-pci-renesas a seprate module] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 20:20:37 +08:00
// SPDX-License-Identifier: GPL-2.0
/* Copyright (C) 2019-2020 Linaro Limited */
#include <linux/acpi.h>
#include <linux/firmware.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/slab.h>
usb: renesas-xhci: include correct header for get_unaligned_le16() get_unaligned_le16() is defined in linux/unaligned/access_ok.h header but it uses symbols which may not be available, leading to build failures on ia64. Using asm/unaligned.h seem to be the right thing and used in other drivers. This fixes below error reported by kbuild test robot In file included from drivers/usb/host/xhci-pci-renesas.c:9: >> include/linux/unaligned/access_ok.h:8:28: error: redefinition of 'get_unaligned_le16' 8 | static __always_inline u16 get_unaligned_le16(const void *p) | ^~~~~~~~~~~~~~~~~~ In file included from arch/ia64/include/asm/unaligned.h:5, from arch/ia64/include/asm/io.h:23, from arch/ia64/include/asm/smp.h:21, from include/linux/smp.h:67, from include/linux/percpu.h:7, from include/linux/arch_topology.h:9, from include/linux/topology.h:30, from include/linux/gfp.h:9, from include/linux/xarray.h:14, from include/linux/radix-tree.h:18, from include/linux/idr.h:15, from include/linux/kernfs.h:13, from include/linux/sysfs.h:16, from include/linux/kobject.h:20, from include/linux/of.h:17, from include/linux/irqdomain.h:35, from include/linux/acpi.h:13, from drivers/usb/host/xhci-pci-renesas.c:4: include/linux/unaligned/le_struct.h:7:19: note: previous definition of 'get_unaligned_le16' was here 7 | static inline u16 get_unaligned_le16(const void *p) | ^~~~~~~~~~~~~~~~~~ In file included from drivers/usb/host/xhci-pci-renesas.c:9: include/linux/unaligned/access_ok.h:13:28: error: redefinition of 'get_unaligned_le32' 13 | static __always_inline u32 get_unaligned_le32(const void *p) | ^~~~~~~~~~~~~~~~~~ In file included from arch/ia64/include/asm/unaligned.h:5, from arch/ia64/include/asm/io.h:23, from arch/ia64/include/asm/smp.h:21, from include/linux/smp.h:67, from include/linux/percpu.h:7, from include/linux/arch_topology.h:9, from include/linux/topology.h:30, from include/linux/gfp.h:9, from include/linux/xarray.h:14, from include/linux/radix-tree.h:18, from include/linux/idr.h:15, from include/linux/kernfs.h:13, from include/linux/sysfs.h:16, from include/linux/kobject.h:20, from include/linux/of.h:17, from include/linux/irqdomain.h:35, from include/linux/acpi.h:13, from drivers/usb/host/xhci-pci-renesas.c:4: include/linux/unaligned/le_struct.h:12:19: note: previous definition of 'get_unaligned_le32' was here Fixes: 8bd5741e3145 ("usb: renesas-xhci: Add the renesas xhci driver") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200516162516.385149-1-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-17 00:25:16 +08:00
#include <asm/unaligned.h>
usb: renesas-xhci: Add the renesas xhci driver This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recursion for renesas_fw_download add register defines and field names move to a separate file make fw loader as sync probe so that we execute in probe and prevent race make xhci-pci-renesas a seprate module] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 20:20:37 +08:00
#include "xhci.h"
#include "xhci-trace.h"
#include "xhci-pci.h"
#define RENESAS_FW_VERSION 0x6C
#define RENESAS_ROM_CONFIG 0xF0
#define RENESAS_FW_STATUS 0xF4
#define RENESAS_FW_STATUS_MSB 0xF5
#define RENESAS_ROM_STATUS 0xF6
#define RENESAS_ROM_STATUS_MSB 0xF7
#define RENESAS_DATA0 0xF8
#define RENESAS_DATA1 0xFC
#define RENESAS_FW_VERSION_FIELD GENMASK(23, 7)
#define RENESAS_FW_VERSION_OFFSET 8
#define RENESAS_FW_STATUS_DOWNLOAD_ENABLE BIT(0)
#define RENESAS_FW_STATUS_LOCK BIT(1)
#define RENESAS_FW_STATUS_RESULT GENMASK(6, 4)
#define RENESAS_FW_STATUS_INVALID 0
#define RENESAS_FW_STATUS_SUCCESS BIT(4)
#define RENESAS_FW_STATUS_ERROR BIT(5)
#define RENESAS_FW_STATUS_SET_DATA0 BIT(8)
#define RENESAS_FW_STATUS_SET_DATA1 BIT(9)
#define RENESAS_ROM_STATUS_ACCESS BIT(0)
#define RENESAS_ROM_STATUS_ERASE BIT(1)
#define RENESAS_ROM_STATUS_RELOAD BIT(2)
#define RENESAS_ROM_STATUS_RESULT GENMASK(6, 4)
#define RENESAS_ROM_STATUS_NO_RESULT 0
#define RENESAS_ROM_STATUS_SUCCESS BIT(4)
#define RENESAS_ROM_STATUS_ERROR BIT(5)
#define RENESAS_ROM_STATUS_SET_DATA0 BIT(8)
#define RENESAS_ROM_STATUS_SET_DATA1 BIT(9)
#define RENESAS_ROM_STATUS_ROM_EXISTS BIT(15)
#define RENESAS_ROM_ERASE_MAGIC 0x5A65726F
#define RENESAS_ROM_WRITE_MAGIC 0x53524F4D
#define RENESAS_RETRY 10000
#define RENESAS_DELAY 10
#define ROM_VALID_01 0x2013
#define ROM_VALID_02 0x2026
static int renesas_verify_fw_version(struct pci_dev *pdev, u32 version)
{
switch (version) {
case ROM_VALID_01:
case ROM_VALID_02:
return 0;
}
dev_err(&pdev->dev, "FW has invalid version :%d\n", version);
return -EINVAL;
}
usb: renesas-xhci: Add the renesas xhci driver This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recursion for renesas_fw_download add register defines and field names move to a separate file make fw loader as sync probe so that we execute in probe and prevent race make xhci-pci-renesas a seprate module] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 20:20:37 +08:00
static int renesas_fw_download_image(struct pci_dev *dev,
const u32 *fw, size_t step, bool rom)
usb: renesas-xhci: Add the renesas xhci driver This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recursion for renesas_fw_download add register defines and field names move to a separate file make fw loader as sync probe so that we execute in probe and prevent race make xhci-pci-renesas a seprate module] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 20:20:37 +08:00
{
size_t i;
int err;
u8 fw_status;
bool data0_or_data1;
u32 status_reg;
if (rom)
status_reg = RENESAS_ROM_STATUS_MSB;
else
status_reg = RENESAS_FW_STATUS_MSB;
usb: renesas-xhci: Add the renesas xhci driver This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recursion for renesas_fw_download add register defines and field names move to a separate file make fw loader as sync probe so that we execute in probe and prevent race make xhci-pci-renesas a seprate module] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 20:20:37 +08:00
/*
* The hardware does alternate between two 32-bit pages.
* (This is because each row of the firmware is 8 bytes).
*
* for even steps we use DATA0, for odd steps DATA1.
*/
data0_or_data1 = (step & 1) == 1;
/* step+1. Read "Set DATAX" and confirm it is cleared. */
for (i = 0; i < RENESAS_RETRY; i++) {
err = pci_read_config_byte(dev, status_reg, &fw_status);
usb: renesas-xhci: Add the renesas xhci driver This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recursion for renesas_fw_download add register defines and field names move to a separate file make fw loader as sync probe so that we execute in probe and prevent race make xhci-pci-renesas a seprate module] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 20:20:37 +08:00
if (err) {
dev_err(&dev->dev, "Read Status failed: %d\n",
pcibios_err_to_errno(err));
return pcibios_err_to_errno(err);
}
if (!(fw_status & BIT(data0_or_data1)))
break;
udelay(RENESAS_DELAY);
}
if (i == RENESAS_RETRY) {
dev_err(&dev->dev, "Timeout for Set DATAX step: %zd\n", step);
return -ETIMEDOUT;
}
/*
* step+2. Write FW data to "DATAX".
* "LSB is left" => force little endian
*/
err = pci_write_config_dword(dev, data0_or_data1 ?
RENESAS_DATA1 : RENESAS_DATA0,
(__force u32)cpu_to_le32(fw[step]));
if (err) {
dev_err(&dev->dev, "Write to DATAX failed: %d\n",
pcibios_err_to_errno(err));
return pcibios_err_to_errno(err);
}
udelay(100);
/* step+3. Set "Set DATAX". */
err = pci_write_config_byte(dev, status_reg, BIT(data0_or_data1));
usb: renesas-xhci: Add the renesas xhci driver This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recursion for renesas_fw_download add register defines and field names move to a separate file make fw loader as sync probe so that we execute in probe and prevent race make xhci-pci-renesas a seprate module] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 20:20:37 +08:00
if (err) {
dev_err(&dev->dev, "Write config for DATAX failed: %d\n",
pcibios_err_to_errno(err));
return pcibios_err_to_errno(err);
}
return 0;
}
static int renesas_fw_verify(const void *fw_data,
size_t length)
{
u16 fw_version_pointer;
u16 fw_version;
/*
* The Firmware's Data Format is describe in
* "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124
*/
/*
* The bootrom chips of the big brother have sizes up to 64k, let's
* assume that's the biggest the firmware can get.
*/
if (length < 0x1000 || length >= 0x10000) {
pr_err("firmware is size %zd is not (4k - 64k).",
length);
return -EINVAL;
}
/* The First 2 bytes are fixed value (55aa). "LSB on Left" */
if (get_unaligned_le16(fw_data) != 0x55aa) {
pr_err("no valid firmware header found.");
return -EINVAL;
}
/* verify the firmware version position and print it. */
fw_version_pointer = get_unaligned_le16(fw_data + 4);
if (fw_version_pointer + 2 >= length) {
pr_err("fw ver pointer is outside of the firmware image");
return -EINVAL;
}
fw_version = get_unaligned_le16(fw_data + fw_version_pointer);
pr_err("got firmware version: %02x.", fw_version);
return 0;
}
static bool renesas_check_rom(struct pci_dev *pdev)
{
u16 rom_status;
int retval;
/* Check if external ROM exists */
retval = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_status);
if (retval)
return false;
rom_status &= RENESAS_ROM_STATUS_ROM_EXISTS;
if (rom_status) {
dev_dbg(&pdev->dev, "External ROM exists\n");
return true; /* External ROM exists */
}
return false;
}
static int renesas_check_rom_state(struct pci_dev *pdev)
usb: renesas-xhci: Add the renesas xhci driver This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recursion for renesas_fw_download add register defines and field names move to a separate file make fw loader as sync probe so that we execute in probe and prevent race make xhci-pci-renesas a seprate module] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 20:20:37 +08:00
{
u16 rom_state;
u32 version;
usb: renesas-xhci: Add the renesas xhci driver This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recursion for renesas_fw_download add register defines and field names move to a separate file make fw loader as sync probe so that we execute in probe and prevent race make xhci-pci-renesas a seprate module] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 20:20:37 +08:00
int err;
/* check FW version */
err = pci_read_config_dword(pdev, RENESAS_FW_VERSION, &version);
if (err)
return pcibios_err_to_errno(err);
version &= RENESAS_FW_VERSION_FIELD;
version = version >> RENESAS_FW_VERSION_OFFSET;
err = renesas_verify_fw_version(pdev, version);
if (err)
return err;
/*
* Test if ROM is present and loaded, if so we can skip everything
*/
err = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_state);
if (err)
return pcibios_err_to_errno(err);
if (rom_state & BIT(15)) {
/* ROM exists */
dev_dbg(&pdev->dev, "ROM exists\n");
/* Check the "Result Code" Bits (6:4) and act accordingly */
switch (rom_state & RENESAS_ROM_STATUS_RESULT) {
case RENESAS_ROM_STATUS_SUCCESS:
return 0;
case RENESAS_ROM_STATUS_NO_RESULT: /* No result yet */
return 0;
case RENESAS_ROM_STATUS_ERROR: /* Error State */
default: /* All other states are marked as "Reserved states" */
dev_err(&pdev->dev, "Invalid ROM..");
break;
}
}
return -EIO;
}
static int renesas_fw_check_running(struct pci_dev *pdev)
{
usb: renesas-xhci: Add the renesas xhci driver This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recursion for renesas_fw_download add register defines and field names move to a separate file make fw loader as sync probe so that we execute in probe and prevent race make xhci-pci-renesas a seprate module] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 20:20:37 +08:00
u8 fw_state;
int err;
/* Check if device has ROM and loaded, if so skip everything */
err = renesas_check_rom(pdev);
if (err) { /* we have rom */
err = renesas_check_rom_state(pdev);
if (!err)
return err;
}
usb: renesas-xhci: Add the renesas xhci driver This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recursion for renesas_fw_download add register defines and field names move to a separate file make fw loader as sync probe so that we execute in probe and prevent race make xhci-pci-renesas a seprate module] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 20:20:37 +08:00
/*
* Test if the device is actually needing the firmware. As most
* BIOSes will initialize the device for us. If the device is
* initialized.
*/
err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state);
if (err)
return pcibios_err_to_errno(err);
/*
* Check if "FW Download Lock" is locked. If it is and the FW is
* ready we can simply continue. If the FW is not ready, we have
* to give up.
*/
if (fw_state & RENESAS_FW_STATUS_LOCK) {
dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
if (fw_state & RENESAS_FW_STATUS_SUCCESS)
return 0;
dev_err(&pdev->dev,
"FW Download Lock is set and FW is not ready. Giving Up.");
return -EIO;
}
/*
* Check if "FW Download Enable" is set. If someone (us?) tampered
* with it and it can't be reset, we have to give up too... and
* ask for a forgiveness and a reboot.
*/
if (fw_state & RENESAS_FW_STATUS_DOWNLOAD_ENABLE) {
dev_err(&pdev->dev,
"FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
return -EIO;
}
/* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
switch (fw_state & RENESAS_FW_STATUS_RESULT) {
case 0: /* No result yet */
dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
/* tell the caller, that this device needs the firmware. */
return 1;
case RENESAS_FW_STATUS_SUCCESS: /* Success, device should be working. */
dev_dbg(&pdev->dev, "FW is ready.");
return 0;
case RENESAS_FW_STATUS_ERROR: /* Error State */
dev_err(&pdev->dev,
"hardware is in an error state. Giving up (poweroff/reboot needed).");
return -ENODEV;
default: /* All other states are marked as "Reserved states" */
dev_err(&pdev->dev,
"hardware is in an invalid state %lx. Giving up (poweroff/reboot needed).",
(fw_state & RENESAS_FW_STATUS_RESULT) >> 4);
return -EINVAL;
}
}
static int renesas_fw_download(struct pci_dev *pdev,
const struct firmware *fw)
{
const u32 *fw_data = (const u32 *)fw->data;
size_t i;
int err;
u8 fw_status;
/*
* For more information and the big picture: please look at the
* "Firmware Download Sequence" in "7.1 FW Download Interface"
* of R19UH0078EJ0500 Rev.5.00 page 131
*/
/*
* 0. Set "FW Download Enable" bit in the
* "FW Download Control & Status Register" at 0xF4
*/
err = pci_write_config_byte(pdev, RENESAS_FW_STATUS,
RENESAS_FW_STATUS_DOWNLOAD_ENABLE);
if (err)
return pcibios_err_to_errno(err);
/* 1 - 10 follow one step after the other. */
for (i = 0; i < fw->size / 4; i++) {
err = renesas_fw_download_image(pdev, fw_data, i, false);
usb: renesas-xhci: Add the renesas xhci driver This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recursion for renesas_fw_download add register defines and field names move to a separate file make fw loader as sync probe so that we execute in probe and prevent race make xhci-pci-renesas a seprate module] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 20:20:37 +08:00
if (err) {
dev_err(&pdev->dev,
"Firmware Download Step %zd failed at position %zd bytes with (%d).",
i, i * 4, err);
return err;
}
}
/*
* This sequence continues until the last data is written to
* "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1"
* is cleared by the hardware beforehand.
*/
for (i = 0; i < RENESAS_RETRY; i++) {
err = pci_read_config_byte(pdev, RENESAS_FW_STATUS_MSB,
&fw_status);
if (err)
return pcibios_err_to_errno(err);
if (!(fw_status & (BIT(0) | BIT(1))))
break;
udelay(RENESAS_DELAY);
}
if (i == RENESAS_RETRY)
dev_warn(&pdev->dev, "Final Firmware Download step timed out.");
/*
* 11. After finishing writing the last data of FW, the
* System Software must clear "FW Download Enable"
*/
err = pci_write_config_byte(pdev, RENESAS_FW_STATUS, 0);
if (err)
return pcibios_err_to_errno(err);
/* 12. Read "Result Code" and confirm it is good. */
for (i = 0; i < RENESAS_RETRY; i++) {
err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_status);
if (err)
return pcibios_err_to_errno(err);
if (fw_status & RENESAS_FW_STATUS_SUCCESS)
break;
udelay(RENESAS_DELAY);
}
if (i == RENESAS_RETRY) {
/* Timed out / Error - let's see if we can fix this */
err = renesas_fw_check_running(pdev);
switch (err) {
case 0: /*
* we shouldn't end up here.
* maybe it took a little bit longer.
* But all should be well?
*/
break;
case 1: /* (No result yet! */
dev_err(&pdev->dev, "FW Load timedout");
return -ETIMEDOUT;
default:
return err;
}
}
return 0;
}
static void renesas_rom_erase(struct pci_dev *pdev)
{
int retval, i;
u8 status;
dev_dbg(&pdev->dev, "Performing ROM Erase...\n");
retval = pci_write_config_dword(pdev, RENESAS_DATA0,
RENESAS_ROM_ERASE_MAGIC);
if (retval) {
dev_err(&pdev->dev, "ROM erase, magic word write failed: %d\n",
pcibios_err_to_errno(retval));
return;
}
retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
if (retval) {
dev_err(&pdev->dev, "ROM status read failed: %d\n",
pcibios_err_to_errno(retval));
return;
}
status |= RENESAS_ROM_STATUS_ERASE;
retval = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, status);
if (retval) {
dev_err(&pdev->dev, "ROM erase set word write failed\n");
return;
}
/* sleep a bit while ROM is erased */
msleep(20);
for (i = 0; i < RENESAS_RETRY; i++) {
retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS,
&status);
status &= RENESAS_ROM_STATUS_ERASE;
if (!status)
break;
mdelay(RENESAS_DELAY);
}
if (i == RENESAS_RETRY)
dev_dbg(&pdev->dev, "Chip erase timedout: %x\n", status);
dev_dbg(&pdev->dev, "ROM Erase... Done success\n");
}
static bool renesas_setup_rom(struct pci_dev *pdev, const struct firmware *fw)
{
const u32 *fw_data = (const u32 *)fw->data;
int err, i;
u8 status;
/* 2. Write magic word to Data0 */
err = pci_write_config_dword(pdev, RENESAS_DATA0,
RENESAS_ROM_WRITE_MAGIC);
if (err)
return false;
/* 3. Set External ROM access */
err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS,
RENESAS_ROM_STATUS_ACCESS);
if (err)
goto remove_bypass;
/* 4. Check the result */
err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
if (err)
goto remove_bypass;
status &= GENMASK(6, 4);
if (status) {
dev_err(&pdev->dev,
"setting external rom failed: %x\n", status);
goto remove_bypass;
}
/* 5 to 16 Write FW to DATA0/1 while checking SetData0/1 */
for (i = 0; i < fw->size / 4; i++) {
err = renesas_fw_download_image(pdev, fw_data, i, true);
if (err) {
dev_err(&pdev->dev,
"ROM Download Step %d failed at position %d bytes with (%d)\n",
i, i * 4, err);
goto remove_bypass;
}
}
/*
* wait till DATA0/1 is cleared
*/
for (i = 0; i < RENESAS_RETRY; i++) {
err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS_MSB,
&status);
if (err)
goto remove_bypass;
if (!(status & (BIT(0) | BIT(1))))
break;
udelay(RENESAS_DELAY);
}
if (i == RENESAS_RETRY) {
dev_err(&pdev->dev, "Final Firmware ROM Download step timed out\n");
goto remove_bypass;
}
/* 17. Remove bypass */
err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0);
if (err)
return false;
udelay(10);
/* 18. check result */
for (i = 0; i < RENESAS_RETRY; i++) {
err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
if (err) {
dev_err(&pdev->dev, "Read ROM status failed:%d\n",
pcibios_err_to_errno(err));
return false;
}
status &= RENESAS_ROM_STATUS_RESULT;
if (status == RENESAS_ROM_STATUS_SUCCESS) {
dev_dbg(&pdev->dev, "Download ROM success\n");
break;
}
udelay(RENESAS_DELAY);
}
if (i == RENESAS_RETRY) { /* Timed out */
dev_err(&pdev->dev,
"Download to external ROM TO: %x\n", status);
return false;
}
dev_dbg(&pdev->dev, "Download to external ROM succeeded\n");
/* Last step set Reload */
err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS,
RENESAS_ROM_STATUS_RELOAD);
if (err) {
dev_err(&pdev->dev, "Set ROM execute failed: %d\n",
pcibios_err_to_errno(err));
return false;
}
/*
* wait till Reload is cleared
*/
for (i = 0; i < RENESAS_RETRY; i++) {
err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
if (err)
return false;
if (!(status & RENESAS_ROM_STATUS_RELOAD))
break;
udelay(RENESAS_DELAY);
}
if (i == RENESAS_RETRY) {
dev_err(&pdev->dev, "ROM Exec timed out: %x\n", status);
return false;
}
return true;
remove_bypass:
pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0);
return false;
}
usb: renesas-xhci: Add the renesas xhci driver This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recursion for renesas_fw_download add register defines and field names move to a separate file make fw loader as sync probe so that we execute in probe and prevent race make xhci-pci-renesas a seprate module] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 20:20:37 +08:00
static int renesas_load_fw(struct pci_dev *pdev, const struct firmware *fw)
{
int err = 0;
bool rom;
/* Check if the device has external ROM */
rom = renesas_check_rom(pdev);
if (rom) {
/* perform chip erase first */
renesas_rom_erase(pdev);
/* lets try loading fw on ROM first */
rom = renesas_setup_rom(pdev, fw);
if (!rom) {
dev_dbg(&pdev->dev,
"ROM load failed, falling back on FW load\n");
} else {
dev_dbg(&pdev->dev,
"ROM load success\n");
goto exit;
}
}
usb: renesas-xhci: Add the renesas xhci driver This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recursion for renesas_fw_download add register defines and field names move to a separate file make fw loader as sync probe so that we execute in probe and prevent race make xhci-pci-renesas a seprate module] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 20:20:37 +08:00
err = renesas_fw_download(pdev, fw);
exit:
usb: renesas-xhci: Add the renesas xhci driver This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recursion for renesas_fw_download add register defines and field names move to a separate file make fw loader as sync probe so that we execute in probe and prevent race make xhci-pci-renesas a seprate module] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 20:20:37 +08:00
if (err)
dev_err(&pdev->dev, "firmware failed to download (%d).", err);
return err;
}
int renesas_xhci_check_request_fw(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct xhci_driver_data *driver_data =
(struct xhci_driver_data *)id->driver_data;
const char *fw_name = driver_data->firmware;
const struct firmware *fw;
int err;
err = renesas_fw_check_running(pdev);
/* Continue ahead, if the firmware is already running. */
if (err == 0)
return 0;
if (err != 1)
return err;
pci_dev_get(pdev);
err = request_firmware(&fw, fw_name, &pdev->dev);
pci_dev_put(pdev);
if (err) {
dev_err(&pdev->dev, "request_firmware failed: %d\n", err);
return err;
}
err = renesas_fw_verify(fw->data, fw->size);
if (err)
goto exit;
err = renesas_load_fw(pdev, fw);
exit:
release_firmware(fw);
return err;
}
EXPORT_SYMBOL_GPL(renesas_xhci_check_request_fw);
void renesas_xhci_pci_exit(struct pci_dev *dev)
{
}
EXPORT_SYMBOL_GPL(renesas_xhci_pci_exit);
MODULE_LICENSE("GPL v2");