linux/drivers/devfreq/event/exynos-ppmu.c

683 lines
16 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
/*
* exynos_ppmu.c - EXYNOS PPMU (Platform Performance Monitoring Unit) support
*
* Copyright (c) 2014-2015 Samsung Electronics Co., Ltd.
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
* Author : Chanwoo Choi <cw00.choi@samsung.com>
*
* This driver is based on drivers/devfreq/exynos/exynos_ppmu.c
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
#include <linux/suspend.h>
#include <linux/devfreq-event.h>
#include "exynos-ppmu.h"
struct exynos_ppmu_data {
struct clk *clk;
};
struct exynos_ppmu {
struct devfreq_event_dev **edev;
struct devfreq_event_desc *desc;
unsigned int num_events;
struct device *dev;
struct regmap *regmap;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
struct exynos_ppmu_data ppmu;
};
#define PPMU_EVENT(name) \
{ "ppmu-event0-"#name, PPMU_PMNCNT0 }, \
{ "ppmu-event1-"#name, PPMU_PMNCNT1 }, \
{ "ppmu-event2-"#name, PPMU_PMNCNT2 }, \
{ "ppmu-event3-"#name, PPMU_PMNCNT3 }
static struct __exynos_ppmu_events {
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
char *name;
int id;
} ppmu_events[] = {
/* For Exynos3250, Exynos4 and Exynos5260 */
PPMU_EVENT(g3d),
PPMU_EVENT(fsys),
/* For Exynos4 SoCs and Exynos3250 */
PPMU_EVENT(dmc0),
PPMU_EVENT(dmc1),
PPMU_EVENT(cpu),
PPMU_EVENT(rightbus),
PPMU_EVENT(leftbus),
PPMU_EVENT(lcd0),
PPMU_EVENT(camif),
/* Only for Exynos3250 and Exynos5260 */
PPMU_EVENT(mfc),
/* Only for Exynos4 SoCs */
PPMU_EVENT(mfc-left),
PPMU_EVENT(mfc-right),
/* Only for Exynos5260 SoCs */
PPMU_EVENT(drex0-s0),
PPMU_EVENT(drex0-s1),
PPMU_EVENT(drex1-s0),
PPMU_EVENT(drex1-s1),
PPMU_EVENT(eagle),
PPMU_EVENT(kfc),
PPMU_EVENT(isp),
PPMU_EVENT(fimc),
PPMU_EVENT(gscl),
PPMU_EVENT(mscl),
PPMU_EVENT(fimd0x),
PPMU_EVENT(fimd1x),
/* Only for Exynos5433 SoCs */
PPMU_EVENT(d0-cpu),
PPMU_EVENT(d0-general),
PPMU_EVENT(d0-rt),
PPMU_EVENT(d1-cpu),
PPMU_EVENT(d1-general),
PPMU_EVENT(d1-rt),
/* For Exynos5422 SoC */
PPMU_EVENT(dmc0_0),
PPMU_EVENT(dmc0_1),
PPMU_EVENT(dmc1_0),
PPMU_EVENT(dmc1_1),
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
};
static int exynos_ppmu_find_ppmu_id(struct devfreq_event_dev *edev)
{
int i;
for (i = 0; i < ARRAY_SIZE(ppmu_events); i++)
if (!strcmp(edev->desc->name, ppmu_events[i].name))
return ppmu_events[i].id;
return -EINVAL;
}
/*
* The devfreq-event ops structure for PPMU v1.1
*/
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
static int exynos_ppmu_disable(struct devfreq_event_dev *edev)
{
struct exynos_ppmu *info = devfreq_event_get_drvdata(edev);
int ret;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
u32 pmnc;
/* Disable all counters */
ret = regmap_write(info->regmap, PPMU_CNTENC,
PPMU_CCNT_MASK |
PPMU_PMCNT0_MASK |
PPMU_PMCNT1_MASK |
PPMU_PMCNT2_MASK |
PPMU_PMCNT3_MASK);
if (ret < 0)
return ret;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
/* Disable PPMU */
ret = regmap_read(info->regmap, PPMU_PMNC, &pmnc);
if (ret < 0)
return ret;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
pmnc &= ~PPMU_PMNC_ENABLE_MASK;
ret = regmap_write(info->regmap, PPMU_PMNC, pmnc);
if (ret < 0)
return ret;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
return 0;
}
static int exynos_ppmu_set_event(struct devfreq_event_dev *edev)
{
struct exynos_ppmu *info = devfreq_event_get_drvdata(edev);
int id = exynos_ppmu_find_ppmu_id(edev);
int ret;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
u32 pmnc, cntens;
if (id < 0)
return id;
/* Enable specific counter */
ret = regmap_read(info->regmap, PPMU_CNTENS, &cntens);
if (ret < 0)
return ret;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
cntens |= (PPMU_CCNT_MASK | (PPMU_ENABLE << id));
ret = regmap_write(info->regmap, PPMU_CNTENS, cntens);
if (ret < 0)
return ret;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
/* Set the event of Read/Write data count */
ret = regmap_write(info->regmap, PPMU_BEVTxSEL(id),
PPMU_RO_DATA_CNT | PPMU_WO_DATA_CNT);
if (ret < 0)
return ret;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
/* Reset cycle counter/performance counter and enable PPMU */
ret = regmap_read(info->regmap, PPMU_PMNC, &pmnc);
if (ret < 0)
return ret;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
pmnc &= ~(PPMU_PMNC_ENABLE_MASK
| PPMU_PMNC_COUNTER_RESET_MASK
| PPMU_PMNC_CC_RESET_MASK);
pmnc |= (PPMU_ENABLE << PPMU_PMNC_ENABLE_SHIFT);
pmnc |= (PPMU_ENABLE << PPMU_PMNC_COUNTER_RESET_SHIFT);
pmnc |= (PPMU_ENABLE << PPMU_PMNC_CC_RESET_SHIFT);
ret = regmap_write(info->regmap, PPMU_PMNC, pmnc);
if (ret < 0)
return ret;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
return 0;
}
static int exynos_ppmu_get_event(struct devfreq_event_dev *edev,
struct devfreq_event_data *edata)
{
struct exynos_ppmu *info = devfreq_event_get_drvdata(edev);
int id = exynos_ppmu_find_ppmu_id(edev);
unsigned int total_count, load_count;
unsigned int pmcnt3_high, pmcnt3_low;
unsigned int pmnc, cntenc;
int ret;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
if (id < 0)
return -EINVAL;
/* Disable PPMU */
ret = regmap_read(info->regmap, PPMU_PMNC, &pmnc);
if (ret < 0)
return ret;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
pmnc &= ~PPMU_PMNC_ENABLE_MASK;
ret = regmap_write(info->regmap, PPMU_PMNC, pmnc);
if (ret < 0)
return ret;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
/* Read cycle count */
ret = regmap_read(info->regmap, PPMU_CCNT, &total_count);
if (ret < 0)
return ret;
edata->total_count = total_count;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
/* Read performance count */
switch (id) {
case PPMU_PMNCNT0:
case PPMU_PMNCNT1:
case PPMU_PMNCNT2:
ret = regmap_read(info->regmap, PPMU_PMNCT(id), &load_count);
if (ret < 0)
return ret;
edata->load_count = load_count;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
break;
case PPMU_PMNCNT3:
ret = regmap_read(info->regmap, PPMU_PMCNT3_HIGH, &pmcnt3_high);
if (ret < 0)
return ret;
ret = regmap_read(info->regmap, PPMU_PMCNT3_LOW, &pmcnt3_low);
if (ret < 0)
return ret;
edata->load_count = ((pmcnt3_high << 8) | pmcnt3_low);
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
break;
default:
return -EINVAL;
}
/* Disable specific counter */
ret = regmap_read(info->regmap, PPMU_CNTENC, &cntenc);
if (ret < 0)
return ret;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
cntenc |= (PPMU_CCNT_MASK | (PPMU_ENABLE << id));
ret = regmap_write(info->regmap, PPMU_CNTENC, cntenc);
if (ret < 0)
return ret;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
dev_dbg(&edev->dev, "%s (event: %ld/%ld)\n", edev->desc->name,
edata->load_count, edata->total_count);
return 0;
}
static const struct devfreq_event_ops exynos_ppmu_ops = {
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
.disable = exynos_ppmu_disable,
.set_event = exynos_ppmu_set_event,
.get_event = exynos_ppmu_get_event,
};
/*
* The devfreq-event ops structure for PPMU v2.0
*/
static int exynos_ppmu_v2_disable(struct devfreq_event_dev *edev)
{
struct exynos_ppmu *info = devfreq_event_get_drvdata(edev);
int ret;
u32 pmnc, clear;
/* Disable all counters */
clear = (PPMU_CCNT_MASK | PPMU_PMCNT0_MASK | PPMU_PMCNT1_MASK
| PPMU_PMCNT2_MASK | PPMU_PMCNT3_MASK);
ret = regmap_write(info->regmap, PPMU_V2_FLAG, clear);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_INTENC, clear);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_CNTENC, clear);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_CNT_RESET, clear);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_CIG_CFG0, 0x0);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_CIG_CFG1, 0x0);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_CIG_CFG2, 0x0);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_CIG_RESULT, 0x0);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_CNT_AUTO, 0x0);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_CH_EV0_TYPE, 0x0);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_CH_EV1_TYPE, 0x0);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_CH_EV2_TYPE, 0x0);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_CH_EV3_TYPE, 0x0);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_SM_ID_V, 0x0);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_SM_ID_A, 0x0);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_SM_OTHERS_V, 0x0);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_SM_OTHERS_A, 0x0);
if (ret < 0)
return ret;
ret = regmap_write(info->regmap, PPMU_V2_INTERRUPT_RESET, 0x0);
if (ret < 0)
return ret;
/* Disable PPMU */
ret = regmap_read(info->regmap, PPMU_V2_PMNC, &pmnc);
if (ret < 0)
return ret;
pmnc &= ~PPMU_PMNC_ENABLE_MASK;
ret = regmap_write(info->regmap, PPMU_V2_PMNC, pmnc);
if (ret < 0)
return ret;
return 0;
}
static int exynos_ppmu_v2_set_event(struct devfreq_event_dev *edev)
{
struct exynos_ppmu *info = devfreq_event_get_drvdata(edev);
unsigned int pmnc, cntens;
int id = exynos_ppmu_find_ppmu_id(edev);
int ret;
/* Enable all counters */
ret = regmap_read(info->regmap, PPMU_V2_CNTENS, &cntens);
if (ret < 0)
return ret;
cntens |= (PPMU_CCNT_MASK | (PPMU_ENABLE << id));
ret = regmap_write(info->regmap, PPMU_V2_CNTENS, cntens);
if (ret < 0)
return ret;
/* Set the event of Read/Write data count */
switch (id) {
case PPMU_PMNCNT0:
case PPMU_PMNCNT1:
case PPMU_PMNCNT2:
ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id),
PPMU_V2_RO_DATA_CNT | PPMU_V2_WO_DATA_CNT);
if (ret < 0)
return ret;
break;
case PPMU_PMNCNT3:
ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id),
PPMU_V2_EVT3_RW_DATA_CNT);
if (ret < 0)
return ret;
break;
}
/* Reset cycle counter/performance counter and enable PPMU */
ret = regmap_read(info->regmap, PPMU_V2_PMNC, &pmnc);
if (ret < 0)
return ret;
pmnc &= ~(PPMU_PMNC_ENABLE_MASK
| PPMU_PMNC_COUNTER_RESET_MASK
| PPMU_PMNC_CC_RESET_MASK
| PPMU_PMNC_CC_DIVIDER_MASK
| PPMU_V2_PMNC_START_MODE_MASK);
pmnc |= (PPMU_ENABLE << PPMU_PMNC_ENABLE_SHIFT);
pmnc |= (PPMU_ENABLE << PPMU_PMNC_COUNTER_RESET_SHIFT);
pmnc |= (PPMU_ENABLE << PPMU_PMNC_CC_RESET_SHIFT);
pmnc |= (PPMU_V2_MODE_MANUAL << PPMU_V2_PMNC_START_MODE_SHIFT);
ret = regmap_write(info->regmap, PPMU_V2_PMNC, pmnc);
if (ret < 0)
return ret;
return 0;
}
static int exynos_ppmu_v2_get_event(struct devfreq_event_dev *edev,
struct devfreq_event_data *edata)
{
struct exynos_ppmu *info = devfreq_event_get_drvdata(edev);
int id = exynos_ppmu_find_ppmu_id(edev);
int ret;
unsigned int pmnc, cntenc;
unsigned int pmcnt_high, pmcnt_low;
unsigned int total_count, count;
unsigned long load_count = 0;
/* Disable PPMU */
ret = regmap_read(info->regmap, PPMU_V2_PMNC, &pmnc);
if (ret < 0)
return ret;
pmnc &= ~PPMU_PMNC_ENABLE_MASK;
ret = regmap_write(info->regmap, PPMU_V2_PMNC, pmnc);
if (ret < 0)
return ret;
/* Read cycle count and performance count */
ret = regmap_read(info->regmap, PPMU_V2_CCNT, &total_count);
if (ret < 0)
return ret;
edata->total_count = total_count;
switch (id) {
case PPMU_PMNCNT0:
case PPMU_PMNCNT1:
case PPMU_PMNCNT2:
ret = regmap_read(info->regmap, PPMU_V2_PMNCT(id), &count);
if (ret < 0)
return ret;
load_count = count;
break;
case PPMU_PMNCNT3:
ret = regmap_read(info->regmap, PPMU_V2_PMCNT3_HIGH,
&pmcnt_high);
if (ret < 0)
return ret;
ret = regmap_read(info->regmap, PPMU_V2_PMCNT3_LOW, &pmcnt_low);
if (ret < 0)
return ret;
load_count = ((u64)((pmcnt_high & 0xff)) << 32)+ (u64)pmcnt_low;
break;
}
edata->load_count = load_count;
/* Disable all counters */
ret = regmap_read(info->regmap, PPMU_V2_CNTENC, &cntenc);
if (ret < 0)
return 0;
cntenc |= (PPMU_CCNT_MASK | (PPMU_ENABLE << id));
ret = regmap_write(info->regmap, PPMU_V2_CNTENC, cntenc);
if (ret < 0)
return ret;
dev_dbg(&edev->dev, "%25s (load: %ld / %ld)\n", edev->desc->name,
edata->load_count, edata->total_count);
return 0;
}
static const struct devfreq_event_ops exynos_ppmu_v2_ops = {
.disable = exynos_ppmu_v2_disable,
.set_event = exynos_ppmu_v2_set_event,
.get_event = exynos_ppmu_v2_get_event,
};
static const struct of_device_id exynos_ppmu_id_match[] = {
{
.compatible = "samsung,exynos-ppmu",
.data = (void *)&exynos_ppmu_ops,
}, {
.compatible = "samsung,exynos-ppmu-v2",
.data = (void *)&exynos_ppmu_v2_ops,
},
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, exynos_ppmu_id_match);
static struct devfreq_event_ops *exynos_bus_get_ops(struct device_node *np)
{
const struct of_device_id *match;
match = of_match_node(exynos_ppmu_id_match, np);
return (struct devfreq_event_ops *)match->data;
}
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
static int of_get_devfreq_events(struct device_node *np,
struct exynos_ppmu *info)
{
struct devfreq_event_desc *desc;
struct devfreq_event_ops *event_ops;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
struct device *dev = info->dev;
struct device_node *events_np, *node;
int i, j, count;
events_np = of_get_child_by_name(np, "events");
if (!events_np) {
dev_err(dev,
"failed to get child node of devfreq-event devices\n");
return -EINVAL;
}
event_ops = exynos_bus_get_ops(np);
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
count = of_get_child_count(events_np);
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:07:58 +08:00
desc = devm_kcalloc(dev, count, sizeof(*desc), GFP_KERNEL);
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
if (!desc)
return -ENOMEM;
info->num_events = count;
j = 0;
for_each_child_of_node(events_np, node) {
for (i = 0; i < ARRAY_SIZE(ppmu_events); i++) {
if (!ppmu_events[i].name)
continue;
if (of_node_name_eq(node, ppmu_events[i].name))
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
break;
}
if (i == ARRAY_SIZE(ppmu_events)) {
dev_warn(dev,
"don't know how to configure events : %pOFn\n",
node);
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
continue;
}
desc[j].ops = event_ops;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
desc[j].driver_data = info;
of_property_read_string(node, "event-name", &desc[j].name);
j++;
}
info->desc = desc;
of_node_put(events_np);
return 0;
}
static struct regmap_config exynos_ppmu_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
};
static int exynos_ppmu_parse_dt(struct platform_device *pdev,
struct exynos_ppmu *info)
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
{
struct device *dev = info->dev;
struct device_node *np = dev->of_node;
struct resource *res;
void __iomem *base;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
int ret = 0;
if (!np) {
dev_err(dev, "failed to find devicetree node\n");
return -EINVAL;
}
/* Maps the memory mapped IO to control PPMU register */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
exynos_ppmu_regmap_config.max_register = resource_size(res) - 4;
info->regmap = devm_regmap_init_mmio(dev, base,
&exynos_ppmu_regmap_config);
if (IS_ERR(info->regmap)) {
dev_err(dev, "failed to initialize regmap\n");
return PTR_ERR(info->regmap);
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
}
info->ppmu.clk = devm_clk_get(dev, "ppmu");
if (IS_ERR(info->ppmu.clk)) {
info->ppmu.clk = NULL;
dev_warn(dev, "cannot get PPMU clock\n");
}
ret = of_get_devfreq_events(np, info);
if (ret < 0) {
dev_err(dev, "failed to parse exynos ppmu dt node\n");
return ret;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
}
return 0;
}
static int exynos_ppmu_probe(struct platform_device *pdev)
{
struct exynos_ppmu *info;
struct devfreq_event_dev **edev;
struct devfreq_event_desc *desc;
int i, ret = 0, size;
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
info->dev = &pdev->dev;
/* Parse dt data to get resource */
ret = exynos_ppmu_parse_dt(pdev, info);
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
if (ret < 0) {
dev_err(&pdev->dev,
"failed to parse devicetree for resource\n");
return ret;
}
desc = info->desc;
size = sizeof(struct devfreq_event_dev *) * info->num_events;
info->edev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (!info->edev)
return -ENOMEM;
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
edev = info->edev;
platform_set_drvdata(pdev, info);
for (i = 0; i < info->num_events; i++) {
edev[i] = devm_devfreq_event_add_edev(&pdev->dev, &desc[i]);
if (IS_ERR(edev[i])) {
ret = PTR_ERR(edev[i]);
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
dev_err(&pdev->dev,
"failed to add devfreq-event device\n");
return PTR_ERR(edev[i]);
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
}
pr_info("exynos-ppmu: new PPMU device registered %s (%s)\n",
dev_name(&pdev->dev), desc[i].name);
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
}
ret = clk_prepare_enable(info->ppmu.clk);
if (ret) {
dev_err(&pdev->dev, "failed to prepare ppmu clock\n");
return ret;
}
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 12:16:27 +08:00
return 0;
}
static int exynos_ppmu_remove(struct platform_device *pdev)
{
struct exynos_ppmu *info = platform_get_drvdata(pdev);
clk_disable_unprepare(info->ppmu.clk);
return 0;
}
static struct platform_driver exynos_ppmu_driver = {
.probe = exynos_ppmu_probe,
.remove = exynos_ppmu_remove,
.driver = {
.name = "exynos-ppmu",
.of_match_table = exynos_ppmu_id_match,
},
};
module_platform_driver(exynos_ppmu_driver);
MODULE_DESCRIPTION("Exynos PPMU(Platform Performance Monitoring Unit) driver");
MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
MODULE_LICENSE("GPL");