linux/fs/xfs/xfs_bmap_util.c

1933 lines
50 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2000-2006 Silicon Graphics, Inc.
* Copyright (c) 2012 Red Hat, Inc.
* All Rights Reserved.
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_bit.h"
#include "xfs_mount.h"
#include "xfs_defer.h"
#include "xfs_inode.h"
#include "xfs_btree.h"
#include "xfs_trans.h"
#include "xfs_alloc.h"
#include "xfs_bmap.h"
#include "xfs_bmap_util.h"
#include "xfs_bmap_btree.h"
#include "xfs_rtalloc.h"
#include "xfs_error.h"
#include "xfs_quota.h"
#include "xfs_trans_space.h"
#include "xfs_trace.h"
#include "xfs_icache.h"
#include "xfs_iomap.h"
#include "xfs_reflink.h"
/* Kernel only BMAP related definitions and functions */
/*
* Convert the given file system block to a disk block. We have to treat it
* differently based on whether the file is a real time file or not, because the
* bmap code does.
*/
xfs_daddr_t
xfs_fsb_to_db(struct xfs_inode *ip, xfs_fsblock_t fsb)
{
if (XFS_IS_REALTIME_INODE(ip))
return XFS_FSB_TO_BB(ip->i_mount, fsb);
return XFS_FSB_TO_DADDR(ip->i_mount, fsb);
}
/*
* Routine to zero an extent on disk allocated to the specific inode.
*
* The VFS functions take a linearised filesystem block offset, so we have to
* convert the sparse xfs fsb to the right format first.
* VFS types are real funky, too.
*/
int
xfs_zero_extent(
struct xfs_inode *ip,
xfs_fsblock_t start_fsb,
xfs_off_t count_fsb)
{
struct xfs_mount *mp = ip->i_mount;
xfs_daddr_t sector = xfs_fsb_to_db(ip, start_fsb);
sector_t block = XFS_BB_TO_FSBT(mp, sector);
return blkdev_issue_zeroout(xfs_find_bdev_for_inode(VFS_I(ip)),
block << (mp->m_super->s_blocksize_bits - 9),
count_fsb << (mp->m_super->s_blocksize_bits - 9),
GFP_NOFS, 0);
}
#ifdef CONFIG_XFS_RT
int
xfs_bmap_rtalloc(
struct xfs_bmalloca *ap) /* bmap alloc argument struct */
{
int error; /* error return value */
xfs_mount_t *mp; /* mount point structure */
xfs_extlen_t prod = 0; /* product factor for allocators */
xfs_extlen_t mod = 0; /* product factor for allocators */
xfs_extlen_t ralen = 0; /* realtime allocation length */
xfs_extlen_t align; /* minimum allocation alignment */
xfs_rtblock_t rtb;
mp = ap->ip->i_mount;
align = xfs_get_extsz_hint(ap->ip);
prod = align / mp->m_sb.sb_rextsize;
error = xfs_bmap_extsize_align(mp, &ap->got, &ap->prev,
align, 1, ap->eof, 0,
ap->conv, &ap->offset, &ap->length);
if (error)
return error;
ASSERT(ap->length);
ASSERT(ap->length % mp->m_sb.sb_rextsize == 0);
/*
* If the offset & length are not perfectly aligned
* then kill prod, it will just get us in trouble.
*/
div_u64_rem(ap->offset, align, &mod);
if (mod || ap->length % align)
prod = 1;
/*
* Set ralen to be the actual requested length in rtextents.
*/
ralen = ap->length / mp->m_sb.sb_rextsize;
/*
* If the old value was close enough to MAXEXTLEN that
* we rounded up to it, cut it back so it's valid again.
* Note that if it's a really large request (bigger than
* MAXEXTLEN), we don't hear about that number, and can't
* adjust the starting point to match it.
*/
if (ralen * mp->m_sb.sb_rextsize >= MAXEXTLEN)
ralen = MAXEXTLEN / mp->m_sb.sb_rextsize;
/*
* Lock out modifications to both the RT bitmap and summary inodes
*/
xfs_ilock(mp->m_rbmip, XFS_ILOCK_EXCL|XFS_ILOCK_RTBITMAP);
xfs_trans_ijoin(ap->tp, mp->m_rbmip, XFS_ILOCK_EXCL);
xfs_ilock(mp->m_rsumip, XFS_ILOCK_EXCL|XFS_ILOCK_RTSUM);
xfs_trans_ijoin(ap->tp, mp->m_rsumip, XFS_ILOCK_EXCL);
/*
* If it's an allocation to an empty file at offset 0,
* pick an extent that will space things out in the rt area.
*/
if (ap->eof && ap->offset == 0) {
xfs_rtblock_t uninitialized_var(rtx); /* realtime extent no */
error = xfs_rtpick_extent(mp, ap->tp, ralen, &rtx);
if (error)
return error;
ap->blkno = rtx * mp->m_sb.sb_rextsize;
} else {
ap->blkno = 0;
}
xfs_bmap_adjacent(ap);
/*
* Realtime allocation, done through xfs_rtallocate_extent.
*/
do_div(ap->blkno, mp->m_sb.sb_rextsize);
rtb = ap->blkno;
ap->length = ralen;
error = xfs_rtallocate_extent(ap->tp, ap->blkno, 1, ap->length,
&ralen, ap->wasdel, prod, &rtb);
if (error)
return error;
ap->blkno = rtb;
if (ap->blkno != NULLFSBLOCK) {
ap->blkno *= mp->m_sb.sb_rextsize;
ralen *= mp->m_sb.sb_rextsize;
ap->length = ralen;
ap->ip->i_d.di_nblocks += ralen;
xfs_trans_log_inode(ap->tp, ap->ip, XFS_ILOG_CORE);
if (ap->wasdel)
ap->ip->i_delayed_blks -= ralen;
/*
* Adjust the disk quota also. This was reserved
* earlier.
*/
xfs_trans_mod_dquot_byino(ap->tp, ap->ip,
ap->wasdel ? XFS_TRANS_DQ_DELRTBCOUNT :
XFS_TRANS_DQ_RTBCOUNT, (long) ralen);
/* Zero the extent if we were asked to do so */
xfs: remote attribute blocks aren't really userdata When adding a new remote attribute, we write the attribute to the new extent before the allocation transaction is committed. This means we cannot reuse busy extents as that violates crash consistency semantics. Hence we currently treat remote attribute extent allocation like userdata because it has the same overwrite ordering constraints as userdata. Unfortunately, this also allows the allocator to incorrectly apply extent size hints to the remote attribute extent allocation. This results in interesting failures, such as transaction block reservation overruns and in-memory inode attribute fork corruption. To fix this, we need to separate the busy extent reuse configuration from the userdata configuration. This changes the definition of XFS_BMAPI_METADATA slightly - it now means that allocation is metadata and reuse of busy extents is acceptible due to the metadata ordering semantics of the journal. If this flag is not set, it means the allocation is that has unordered data writeback, and hence busy extent reuse is not allowed. It no longer implies the allocation is for user data, just that the data write will not be strictly ordered. This matches the semantics for both user data and remote attribute block allocation. As such, This patch changes the "userdata" field to a "datatype" field, and adds a "no busy reuse" flag to the field. When we detect an unordered data extent allocation, we immediately set the no reuse flag. We then set the "user data" flags based on the inode fork we are allocating the extent to. Hence we only set userdata flags on data fork allocations now and consider attribute fork remote extents to be an unordered metadata extent. The result is that remote attribute extents now have the expected allocation semantics, and the data fork allocation behaviour is completely unchanged. It should be noted that there may be other ways to fix this (e.g. use ordered metadata buffers for the remote attribute extent data write) but they are more invasive and difficult to validate both from a design and implementation POV. Hence this patch takes the simple, obvious route to fixing the problem... Reported-and-tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-26 06:21:28 +08:00
if (ap->datatype & XFS_ALLOC_USERDATA_ZERO) {
error = xfs_zero_extent(ap->ip, ap->blkno, ap->length);
if (error)
return error;
}
} else {
ap->length = 0;
}
return 0;
}
#endif /* CONFIG_XFS_RT */
/*
* Check if the endoff is outside the last extent. If so the caller will grow
* the allocation to a stripe unit boundary. All offsets are considered outside
* the end of file for an empty fork, so 1 is returned in *eof in that case.
*/
int
xfs_bmap_eof(
struct xfs_inode *ip,
xfs_fileoff_t endoff,
int whichfork,
int *eof)
{
struct xfs_bmbt_irec rec;
int error;
error = xfs_bmap_last_extent(NULL, ip, whichfork, &rec, eof);
if (error || *eof)
return error;
*eof = endoff >= rec.br_startoff + rec.br_blockcount;
return 0;
}
/*
* Extent tree block counting routines.
*/
/*
* Count leaf blocks given a range of extent records. Delayed allocation
* extents are not counted towards the totals.
*/
xfs_extnum_t
xfs_bmap_count_leaves(
struct xfs_ifork *ifp,
xfs_filblks_t *count)
{
struct xfs_iext_cursor icur;
struct xfs_bmbt_irec got;
xfs_extnum_t numrecs = 0;
for_each_xfs_iext(ifp, &icur, &got) {
if (!isnullstartblock(got.br_startblock)) {
*count += got.br_blockcount;
numrecs++;
}
}
return numrecs;
}
/*
* Count leaf blocks given a range of extent records originally
* in btree format.
*/
STATIC void
xfs_bmap_disk_count_leaves(
struct xfs_mount *mp,
struct xfs_btree_block *block,
int numrecs,
xfs_filblks_t *count)
{
int b;
xfs_bmbt_rec_t *frp;
for (b = 1; b <= numrecs; b++) {
frp = XFS_BMBT_REC_ADDR(mp, block, b);
*count += xfs_bmbt_disk_get_blockcount(frp);
}
}
/*
* Recursively walks each level of a btree
* to count total fsblocks in use.
*/
STATIC int
xfs_bmap_count_tree(
struct xfs_mount *mp,
struct xfs_trans *tp,
struct xfs_ifork *ifp,
xfs_fsblock_t blockno,
int levelin,
xfs_extnum_t *nextents,
xfs_filblks_t *count)
{
int error;
struct xfs_buf *bp, *nbp;
int level = levelin;
__be64 *pp;
xfs_fsblock_t bno = blockno;
xfs_fsblock_t nextbno;
struct xfs_btree_block *block, *nextblock;
int numrecs;
error = xfs_btree_read_bufl(mp, tp, bno, &bp, XFS_BMAP_BTREE_REF,
&xfs_bmbt_buf_ops);
if (error)
return error;
*count += 1;
block = XFS_BUF_TO_BLOCK(bp);
if (--level) {
/* Not at node above leaves, count this level of nodes */
nextbno = be64_to_cpu(block->bb_u.l.bb_rightsib);
while (nextbno != NULLFSBLOCK) {
error = xfs_btree_read_bufl(mp, tp, nextbno, &nbp,
XFS_BMAP_BTREE_REF,
&xfs_bmbt_buf_ops);
if (error)
return error;
*count += 1;
nextblock = XFS_BUF_TO_BLOCK(nbp);
nextbno = be64_to_cpu(nextblock->bb_u.l.bb_rightsib);
xfs_trans_brelse(tp, nbp);
}
/* Dive to the next level */
pp = XFS_BMBT_PTR_ADDR(mp, block, 1, mp->m_bmap_dmxr[1]);
bno = be64_to_cpu(*pp);
error = xfs_bmap_count_tree(mp, tp, ifp, bno, level, nextents,
count);
if (error) {
xfs_trans_brelse(tp, bp);
XFS_ERROR_REPORT("xfs_bmap_count_tree(1)",
XFS_ERRLEVEL_LOW, mp);
return -EFSCORRUPTED;
}
xfs_trans_brelse(tp, bp);
} else {
/* count all level 1 nodes and their leaves */
for (;;) {
nextbno = be64_to_cpu(block->bb_u.l.bb_rightsib);
numrecs = be16_to_cpu(block->bb_numrecs);
(*nextents) += numrecs;
xfs_bmap_disk_count_leaves(mp, block, numrecs, count);
xfs_trans_brelse(tp, bp);
if (nextbno == NULLFSBLOCK)
break;
bno = nextbno;
error = xfs_btree_read_bufl(mp, tp, bno, &bp,
XFS_BMAP_BTREE_REF,
&xfs_bmbt_buf_ops);
if (error)
return error;
*count += 1;
block = XFS_BUF_TO_BLOCK(bp);
}
}
return 0;
}
/*
* Count fsblocks of the given fork. Delayed allocation extents are
* not counted towards the totals.
*/
int
xfs_bmap_count_blocks(
struct xfs_trans *tp,
struct xfs_inode *ip,
int whichfork,
xfs_extnum_t *nextents,
xfs_filblks_t *count)
{
struct xfs_mount *mp; /* file system mount structure */
__be64 *pp; /* pointer to block address */
struct xfs_btree_block *block; /* current btree block */
struct xfs_ifork *ifp; /* fork structure */
xfs_fsblock_t bno; /* block # of "block" */
int level; /* btree level, for checking */
int error;
bno = NULLFSBLOCK;
mp = ip->i_mount;
*nextents = 0;
*count = 0;
ifp = XFS_IFORK_PTR(ip, whichfork);
if (!ifp)
return 0;
switch (XFS_IFORK_FORMAT(ip, whichfork)) {
case XFS_DINODE_FMT_EXTENTS:
*nextents = xfs_bmap_count_leaves(ifp, count);
return 0;
case XFS_DINODE_FMT_BTREE:
if (!(ifp->if_flags & XFS_IFEXTENTS)) {
error = xfs_iread_extents(tp, ip, whichfork);
if (error)
return error;
}
/*
* Root level must use BMAP_BROOT_PTR_ADDR macro to get ptr out.
*/
block = ifp->if_broot;
level = be16_to_cpu(block->bb_level);
ASSERT(level > 0);
pp = XFS_BMAP_BROOT_PTR_ADDR(mp, block, 1, ifp->if_broot_bytes);
bno = be64_to_cpu(*pp);
ASSERT(bno != NULLFSBLOCK);
ASSERT(XFS_FSB_TO_AGNO(mp, bno) < mp->m_sb.sb_agcount);
ASSERT(XFS_FSB_TO_AGBNO(mp, bno) < mp->m_sb.sb_agblocks);
error = xfs_bmap_count_tree(mp, tp, ifp, bno, level,
nextents, count);
if (error) {
XFS_ERROR_REPORT("xfs_bmap_count_blocks(2)",
XFS_ERRLEVEL_LOW, mp);
return -EFSCORRUPTED;
}
return 0;
}
return 0;
}
static int
xfs_getbmap_report_one(
struct xfs_inode *ip,
struct getbmapx *bmv,
struct kgetbmap *out,
int64_t bmv_end,
struct xfs_bmbt_irec *got)
{
struct kgetbmap *p = out + bmv->bmv_entries;
bool shared = false;
int error;
error = xfs_reflink_trim_around_shared(ip, got, &shared);
if (error)
return error;
if (isnullstartblock(got->br_startblock) ||
got->br_startblock == DELAYSTARTBLOCK) {
/*
* Delalloc extents that start beyond EOF can occur due to
* speculative EOF allocation when the delalloc extent is larger
* than the largest freespace extent at conversion time. These
* extents cannot be converted by data writeback, so can exist
* here even if we are not supposed to be finding delalloc
* extents.
*/
if (got->br_startoff < XFS_B_TO_FSB(ip->i_mount, XFS_ISIZE(ip)))
ASSERT((bmv->bmv_iflags & BMV_IF_DELALLOC) != 0);
p->bmv_oflags |= BMV_OF_DELALLOC;
p->bmv_block = -2;
} else {
p->bmv_block = xfs_fsb_to_db(ip, got->br_startblock);
}
if (got->br_state == XFS_EXT_UNWRITTEN &&
(bmv->bmv_iflags & BMV_IF_PREALLOC))
p->bmv_oflags |= BMV_OF_PREALLOC;
if (shared)
p->bmv_oflags |= BMV_OF_SHARED;
p->bmv_offset = XFS_FSB_TO_BB(ip->i_mount, got->br_startoff);
p->bmv_length = XFS_FSB_TO_BB(ip->i_mount, got->br_blockcount);
bmv->bmv_offset = p->bmv_offset + p->bmv_length;
bmv->bmv_length = max(0LL, bmv_end - bmv->bmv_offset);
bmv->bmv_entries++;
return 0;
}
static void
xfs_getbmap_report_hole(
struct xfs_inode *ip,
struct getbmapx *bmv,
struct kgetbmap *out,
int64_t bmv_end,
xfs_fileoff_t bno,
xfs_fileoff_t end)
{
struct kgetbmap *p = out + bmv->bmv_entries;
if (bmv->bmv_iflags & BMV_IF_NO_HOLES)
return;
p->bmv_block = -1;
p->bmv_offset = XFS_FSB_TO_BB(ip->i_mount, bno);
p->bmv_length = XFS_FSB_TO_BB(ip->i_mount, end - bno);
bmv->bmv_offset = p->bmv_offset + p->bmv_length;
bmv->bmv_length = max(0LL, bmv_end - bmv->bmv_offset);
bmv->bmv_entries++;
}
static inline bool
xfs_getbmap_full(
struct getbmapx *bmv)
{
return bmv->bmv_length == 0 || bmv->bmv_entries >= bmv->bmv_count - 1;
}
static bool
xfs_getbmap_next_rec(
struct xfs_bmbt_irec *rec,
xfs_fileoff_t total_end)
{
xfs_fileoff_t end = rec->br_startoff + rec->br_blockcount;
if (end == total_end)
return false;
rec->br_startoff += rec->br_blockcount;
if (!isnullstartblock(rec->br_startblock) &&
rec->br_startblock != DELAYSTARTBLOCK)
rec->br_startblock += rec->br_blockcount;
rec->br_blockcount = total_end - end;
return true;
}
/*
* Get inode's extents as described in bmv, and format for output.
* Calls formatter to fill the user's buffer until all extents
* are mapped, until the passed-in bmv->bmv_count slots have
* been filled, or until the formatter short-circuits the loop,
* if it is tracking filled-in extents on its own.
*/
int /* error code */
xfs_getbmap(
struct xfs_inode *ip,
struct getbmapx *bmv, /* user bmap structure */
struct kgetbmap *out)
{
struct xfs_mount *mp = ip->i_mount;
int iflags = bmv->bmv_iflags;
int whichfork, lock, error = 0;
int64_t bmv_end, max_len;
xfs_fileoff_t bno, first_bno;
struct xfs_ifork *ifp;
struct xfs_bmbt_irec got, rec;
xfs_filblks_t len;
struct xfs_iext_cursor icur;
if (bmv->bmv_iflags & ~BMV_IF_VALID)
return -EINVAL;
#ifndef DEBUG
/* Only allow CoW fork queries if we're debugging. */
if (iflags & BMV_IF_COWFORK)
return -EINVAL;
#endif
if ((iflags & BMV_IF_ATTRFORK) && (iflags & BMV_IF_COWFORK))
return -EINVAL;
if (bmv->bmv_length < -1)
return -EINVAL;
bmv->bmv_entries = 0;
if (bmv->bmv_length == 0)
return 0;
if (iflags & BMV_IF_ATTRFORK)
whichfork = XFS_ATTR_FORK;
else if (iflags & BMV_IF_COWFORK)
whichfork = XFS_COW_FORK;
else
whichfork = XFS_DATA_FORK;
ifp = XFS_IFORK_PTR(ip, whichfork);
xfs_ilock(ip, XFS_IOLOCK_SHARED);
switch (whichfork) {
case XFS_ATTR_FORK:
if (!XFS_IFORK_Q(ip))
goto out_unlock_iolock;
max_len = 1LL << 32;
lock = xfs_ilock_attr_map_shared(ip);
break;
case XFS_COW_FORK:
/* No CoW fork? Just return */
if (!ifp)
goto out_unlock_iolock;
if (xfs_get_cowextsz_hint(ip))
max_len = mp->m_super->s_maxbytes;
else
max_len = XFS_ISIZE(ip);
lock = XFS_ILOCK_SHARED;
xfs_ilock(ip, lock);
break;
case XFS_DATA_FORK:
if (!(iflags & BMV_IF_DELALLOC) &&
(ip->i_delayed_blks || XFS_ISIZE(ip) > ip->i_d.di_size)) {
error = filemap_write_and_wait(VFS_I(ip)->i_mapping);
if (error)
goto out_unlock_iolock;
/*
* Even after flushing the inode, there can still be
* delalloc blocks on the inode beyond EOF due to
* speculative preallocation. These are not removed
* until the release function is called or the inode
* is inactivated. Hence we cannot assert here that
* ip->i_delayed_blks == 0.
*/
}
if (xfs_get_extsz_hint(ip) ||
(ip->i_d.di_flags &
(XFS_DIFLAG_PREALLOC | XFS_DIFLAG_APPEND)))
max_len = mp->m_super->s_maxbytes;
else
max_len = XFS_ISIZE(ip);
lock = xfs_ilock_data_map_shared(ip);
break;
}
switch (XFS_IFORK_FORMAT(ip, whichfork)) {
case XFS_DINODE_FMT_EXTENTS:
case XFS_DINODE_FMT_BTREE:
break;
case XFS_DINODE_FMT_LOCAL:
/* Local format inode forks report no extents. */
goto out_unlock_ilock;
default:
error = -EINVAL;
goto out_unlock_ilock;
}
if (bmv->bmv_length == -1) {
max_len = XFS_FSB_TO_BB(mp, XFS_B_TO_FSB(mp, max_len));
bmv->bmv_length = max(0LL, max_len - bmv->bmv_offset);
}
bmv_end = bmv->bmv_offset + bmv->bmv_length;
first_bno = bno = XFS_BB_TO_FSBT(mp, bmv->bmv_offset);
len = XFS_BB_TO_FSB(mp, bmv->bmv_length);
if (!(ifp->if_flags & XFS_IFEXTENTS)) {
error = xfs_iread_extents(NULL, ip, whichfork);
if (error)
goto out_unlock_ilock;
}
if (!xfs_iext_lookup_extent(ip, ifp, bno, &icur, &got)) {
/*
* Report a whole-file hole if the delalloc flag is set to
* stay compatible with the old implementation.
*/
if (iflags & BMV_IF_DELALLOC)
xfs_getbmap_report_hole(ip, bmv, out, bmv_end, bno,
XFS_B_TO_FSB(mp, XFS_ISIZE(ip)));
goto out_unlock_ilock;
}
while (!xfs_getbmap_full(bmv)) {
xfs_trim_extent(&got, first_bno, len);
/*
* Report an entry for a hole if this extent doesn't directly
* follow the previous one.
*/
if (got.br_startoff > bno) {
xfs_getbmap_report_hole(ip, bmv, out, bmv_end, bno,
got.br_startoff);
if (xfs_getbmap_full(bmv))
break;
}
/*
* In order to report shared extents accurately, we report each
* distinct shared / unshared part of a single bmbt record with
* an individual getbmapx record.
*/
bno = got.br_startoff + got.br_blockcount;
rec = got;
do {
error = xfs_getbmap_report_one(ip, bmv, out, bmv_end,
&rec);
if (error || xfs_getbmap_full(bmv))
goto out_unlock_ilock;
} while (xfs_getbmap_next_rec(&rec, bno));
if (!xfs_iext_next_extent(ifp, &icur, &got)) {
xfs_fileoff_t end = XFS_B_TO_FSB(mp, XFS_ISIZE(ip));
out[bmv->bmv_entries - 1].bmv_oflags |= BMV_OF_LAST;
if (whichfork != XFS_ATTR_FORK && bno < end &&
!xfs_getbmap_full(bmv)) {
xfs_getbmap_report_hole(ip, bmv, out, bmv_end,
bno, end);
}
break;
}
if (bno >= first_bno + len)
break;
}
out_unlock_ilock:
xfs_iunlock(ip, lock);
out_unlock_iolock:
xfs_iunlock(ip, XFS_IOLOCK_SHARED);
return error;
}
/*
* Dead simple method of punching delalyed allocation blocks from a range in
* the inode. This will always punch out both the start and end blocks, even
* if the ranges only partially overlap them, so it is up to the caller to
* ensure that partial blocks are not passed in.
*/
int
xfs_bmap_punch_delalloc_range(
struct xfs_inode *ip,
xfs_fileoff_t start_fsb,
xfs_fileoff_t length)
{
struct xfs_ifork *ifp = &ip->i_df;
xfs_fileoff_t end_fsb = start_fsb + length;
struct xfs_bmbt_irec got, del;
struct xfs_iext_cursor icur;
int error = 0;
ASSERT(ifp->if_flags & XFS_IFEXTENTS);
xfs_ilock(ip, XFS_ILOCK_EXCL);
if (!xfs_iext_lookup_extent_before(ip, ifp, &end_fsb, &icur, &got))
goto out_unlock;
while (got.br_startoff + got.br_blockcount > start_fsb) {
del = got;
xfs_trim_extent(&del, start_fsb, length);
/*
* A delete can push the cursor forward. Step back to the
* previous extent on non-delalloc or extents outside the
* target range.
*/
if (!del.br_blockcount ||
!isnullstartblock(del.br_startblock)) {
if (!xfs_iext_prev_extent(ifp, &icur, &got))
break;
continue;
}
error = xfs_bmap_del_extent_delay(ip, XFS_DATA_FORK, &icur,
&got, &del);
if (error || !xfs_iext_get_extent(ifp, &icur, &got))
break;
}
out_unlock:
xfs_iunlock(ip, XFS_ILOCK_EXCL);
return error;
}
/*
* Test whether it is appropriate to check an inode for and free post EOF
* blocks. The 'force' parameter determines whether we should also consider
* regular files that are marked preallocated or append-only.
*/
bool
xfs_can_free_eofblocks(struct xfs_inode *ip, bool force)
{
/* prealloc/delalloc exists only on regular files */
if (!S_ISREG(VFS_I(ip)->i_mode))
return false;
/*
* Zero sized files with no cached pages and delalloc blocks will not
* have speculative prealloc/delalloc blocks to remove.
*/
if (VFS_I(ip)->i_size == 0 &&
VFS_I(ip)->i_mapping->nrpages == 0 &&
ip->i_delayed_blks == 0)
return false;
/* If we haven't read in the extent list, then don't do it now. */
if (!(ip->i_df.if_flags & XFS_IFEXTENTS))
return false;
/*
* Do not free real preallocated or append-only files unless the file
* has delalloc blocks and we are forced to remove them.
*/
if (ip->i_d.di_flags & (XFS_DIFLAG_PREALLOC | XFS_DIFLAG_APPEND))
if (!force || ip->i_delayed_blks == 0)
return false;
return true;
}
/*
* This is called to free any blocks beyond eof. The caller must hold
* IOLOCK_EXCL unless we are in the inode reclaim path and have the only
* reference to the inode.
*/
int
xfs_free_eofblocks(
struct xfs_inode *ip)
{
struct xfs_trans *tp;
int error;
xfs_fileoff_t end_fsb;
xfs_fileoff_t last_fsb;
xfs_filblks_t map_len;
int nimaps;
struct xfs_bmbt_irec imap;
struct xfs_mount *mp = ip->i_mount;
/*
* Figure out if there are any blocks beyond the end
* of the file. If not, then there is nothing to do.
*/
end_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)XFS_ISIZE(ip));
last_fsb = XFS_B_TO_FSB(mp, mp->m_super->s_maxbytes);
if (last_fsb <= end_fsb)
return 0;
map_len = last_fsb - end_fsb;
nimaps = 1;
xfs_ilock(ip, XFS_ILOCK_SHARED);
error = xfs_bmapi_read(ip, end_fsb, map_len, &imap, &nimaps, 0);
xfs_iunlock(ip, XFS_ILOCK_SHARED);
/*
* If there are blocks after the end of file, truncate the file to its
* current size to free them up.
*/
if (!error && (nimaps != 0) &&
(imap.br_startblock != HOLESTARTBLOCK ||
ip->i_delayed_blks)) {
/*
* Attach the dquots to the inode up front.
*/
error = xfs_qm_dqattach(ip);
if (error)
return error;
xfs: fix eofblocks race with file extending async dio writes It's possible for post-eof blocks to end up being used for direct I/O writes. dio write performs an upfront unwritten extent allocation, sends the dio and then updates the inode size (if necessary) on write completion. If a file release occurs while a file extending dio write is in flight, it is possible to mistake the post-eof blocks for speculative preallocation and incorrectly truncate them from the inode. This means that the resulting dio write completion can discover a hole and allocate new blocks rather than perform unwritten extent conversion. This requires a strange mix of I/O and is thus not likely to reproduce in real world workloads. It is intermittently reproduced by generic/299. The error manifests as an assert failure due to transaction overrun because the aforementioned write completion transaction has only reserved enough blocks for btree operations: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, \ file: fs/xfs//xfs_trans.c, line: 309 The root cause is that xfs_free_eofblocks() uses i_size to truncate post-eof blocks from the inode, but async, file extending direct writes do not update i_size until write completion, long after inode locks are dropped. Therefore, xfs_free_eofblocks() effectively truncates the inode to the incorrect size. Update xfs_free_eofblocks() to serialize against dio similar to how extending writes are serialized against i_size updates before post-eof block zeroing. Specifically, wait on dio while under the iolock. This ensures that dio write completions have updated i_size before post-eof blocks are processed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-28 15:22:57 +08:00
/* wait on dio to ensure i_size has settled */
inode_dio_wait(VFS_I(ip));
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_itruncate, 0, 0, 0,
&tp);
if (error) {
ASSERT(XFS_FORCED_SHUTDOWN(mp));
return error;
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs_trans_ijoin(tp, ip, 0);
/*
* Do not update the on-disk file size. If we update the
* on-disk file size and then the system crashes before the
* contents of the file are flushed to disk then the files
* may be full of holes (ie NULL files bug).
*/
error = xfs_itruncate_extents_flags(&tp, ip, XFS_DATA_FORK,
XFS_ISIZE(ip), XFS_BMAPI_NODISCARD);
if (error) {
/*
* If we get an error at this point we simply don't
* bother truncating the file.
*/
xfs_trans_cancel(tp);
} else {
error = xfs_trans_commit(tp);
if (!error)
xfs_inode_clear_eofblocks_tag(ip);
}
xfs_iunlock(ip, XFS_ILOCK_EXCL);
}
return error;
}
int
xfs_alloc_file_space(
struct xfs_inode *ip,
xfs_off_t offset,
xfs_off_t len,
int alloc_type)
{
xfs_mount_t *mp = ip->i_mount;
xfs_off_t count;
xfs_filblks_t allocated_fsb;
xfs_filblks_t allocatesize_fsb;
xfs_extlen_t extsz, temp;
xfs_fileoff_t startoffset_fsb;
xfs_fileoff_t endoffset_fsb;
int nimaps;
int quota_flag;
int rt;
xfs_trans_t *tp;
xfs_bmbt_irec_t imaps[1], *imapp;
uint qblocks, resblks, resrtextents;
int error;
trace_xfs_alloc_file_space(ip);
if (XFS_FORCED_SHUTDOWN(mp))
return -EIO;
error = xfs_qm_dqattach(ip);
if (error)
return error;
if (len <= 0)
return -EINVAL;
rt = XFS_IS_REALTIME_INODE(ip);
extsz = xfs_get_extsz_hint(ip);
count = len;
imapp = &imaps[0];
nimaps = 1;
startoffset_fsb = XFS_B_TO_FSBT(mp, offset);
endoffset_fsb = XFS_B_TO_FSB(mp, offset + count);
allocatesize_fsb = endoffset_fsb - startoffset_fsb;
/*
* Allocate file space until done or until there is an error
*/
while (allocatesize_fsb && !error) {
xfs_fileoff_t s, e;
/*
* Determine space reservations for data/realtime.
*/
if (unlikely(extsz)) {
s = startoffset_fsb;
do_div(s, extsz);
s *= extsz;
e = startoffset_fsb + allocatesize_fsb;
div_u64_rem(startoffset_fsb, extsz, &temp);
if (temp)
e += temp;
div_u64_rem(e, extsz, &temp);
if (temp)
e += extsz - temp;
} else {
s = 0;
e = allocatesize_fsb;
}
/*
* The transaction reservation is limited to a 32-bit block
* count, hence we need to limit the number of blocks we are
* trying to reserve to avoid an overflow. We can't allocate
* more than @nimaps extents, and an extent is limited on disk
* to MAXEXTLEN (21 bits), so use that to enforce the limit.
*/
resblks = min_t(xfs_fileoff_t, (e - s), (MAXEXTLEN * nimaps));
if (unlikely(rt)) {
resrtextents = qblocks = resblks;
resrtextents /= mp->m_sb.sb_rextsize;
resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0);
quota_flag = XFS_QMOPT_RES_RTBLKS;
} else {
resrtextents = 0;
resblks = qblocks = XFS_DIOSTRAT_SPACE_RES(mp, resblks);
quota_flag = XFS_QMOPT_RES_REGBLKS;
}
/*
* Allocate and setup the transaction.
*/
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_write, resblks,
resrtextents, 0, &tp);
/*
* Check for running out of space
*/
if (error) {
/*
* Free the transaction structure.
*/
ASSERT(error == -ENOSPC || XFS_FORCED_SHUTDOWN(mp));
break;
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
error = xfs_trans_reserve_quota_nblks(tp, ip, qblocks,
0, quota_flag);
if (error)
goto error1;
xfs_trans_ijoin(tp, ip, 0);
error = xfs_bmapi_write(tp, ip, startoffset_fsb,
xfs: don't set bmapi total block req where minleft is xfs_bmapi_write() takes a total block requirement parameter that is passed down to the block allocation code and is used to specify the total block requirement of the associated transaction. This is used to try and select an AG that can not only satisfy the requested extent allocation, but can also accommodate subsequent allocations that might be required to complete the transaction. For example, additional bmbt block allocations may be required on insertion of the resulting extent to an inode data fork. While it's important for callers to calculate and reserve such extra blocks in the transaction, it is not necessary to pass the total value to xfs_bmapi_write() in all cases. The latter automatically sets minleft to ensure that sufficient free blocks remain after the allocation attempt to expand the format of the associated inode (i.e., such as extent to btree conversion, btree splits, etc). Therefore, any callers that pass a total block requirement of the bmap mapping length plus worst case bmbt expansion essentially specify the additional reservation requirement twice. These callers can pass a total of zero to rely on the bmapi minleft policy. Beyond being superfluous, the primary motivation for this change is that the total reservation logic in the bmbt code is dubious in scenarios where minlen < maxlen and a maxlen extent cannot be allocated (which is more common for data extent allocations where contiguity is not required). The total value is based on maxlen in the xfs_bmapi_write() caller. If the bmbt code falls back to an allocation between minlen and maxlen, that allocation will not succeed until total is reset to minlen, which essentially throws away any additional reservation included in total by the caller. In addition, the total value is not reset until after alignment is dropped, which means that such callers drop alignment far too aggressively than necessary. Update all callers of xfs_bmapi_write() that pass a total block value of the mapping length plus bmbt reservation to instead pass zero and rely on xfs_bmapi_minleft() to enforce the bmbt reservation requirement. This trades off slightly less conservative AG selection for the ability to preserve alignment in more scenarios. xfs_bmapi_write() callers that incorporate unrelated or additional reservations in total beyond what is already included in minleft must continue to use the former. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-22 00:26:48 +08:00
allocatesize_fsb, alloc_type, 0, imapp,
&nimaps);
if (error)
goto error0;
/*
* Complete the transaction
*/
error = xfs_trans_commit(tp);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
if (error)
break;
allocated_fsb = imapp->br_blockcount;
if (nimaps == 0) {
error = -ENOSPC;
break;
}
startoffset_fsb += allocated_fsb;
allocatesize_fsb -= allocated_fsb;
}
return error;
error0: /* unlock inode, unreserve quota blocks, cancel trans */
xfs_trans_unreserve_quota_nblks(tp, ip, (long)qblocks, 0, quota_flag);
error1: /* Just cancel transaction */
xfs_trans_cancel(tp);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
return error;
}
static int
xfs_unmap_extent(
struct xfs_inode *ip,
xfs_fileoff_t startoffset_fsb,
xfs_filblks_t len_fsb,
int *done)
{
struct xfs_mount *mp = ip->i_mount;
struct xfs_trans *tp;
uint resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0);
int error;
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_write, resblks, 0, 0, &tp);
if (error) {
ASSERT(error == -ENOSPC || XFS_FORCED_SHUTDOWN(mp));
return error;
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
error = xfs_trans_reserve_quota(tp, mp, ip->i_udquot, ip->i_gdquot,
ip->i_pdquot, resblks, 0, XFS_QMOPT_RES_REGBLKS);
if (error)
goto out_trans_cancel;
xfs_trans_ijoin(tp, ip, 0);
error = xfs_bunmapi(tp, ip, startoffset_fsb, len_fsb, 0, 2, done);
if (error)
goto out_trans_cancel;
error = xfs_trans_commit(tp);
out_unlock:
xfs_iunlock(ip, XFS_ILOCK_EXCL);
return error;
out_trans_cancel:
xfs_trans_cancel(tp);
goto out_unlock;
}
xfs: flush removing page cache in xfs_reflink_remap_prep On a sub-page block size filesystem, fsx is failing with a data corruption after a series of operations involving copying a file with the destination offset beyond EOF of the destination of the file: 8093(157 mod 256): TRUNCATE DOWN from 0x7a120 to 0x50000 ******WWWW 8094(158 mod 256): INSERT 0x25000 thru 0x25fff (0x1000 bytes) 8095(159 mod 256): COPY 0x18000 thru 0x1afff (0x3000 bytes) to 0x2f400 8096(160 mod 256): WRITE 0x5da00 thru 0x651ff (0x7800 bytes) HOLE 8097(161 mod 256): COPY 0x2000 thru 0x5fff (0x4000 bytes) to 0x6fc00 The second copy here is beyond EOF, and it is to sub-page (4k) but block aligned (1k) offset. The clone runs the EOF zeroing, landing in a pre-existing post-eof delalloc extent. This zeroes the post-eof extents in the page cache just fine, dirtying the pages correctly. The problem is that xfs_reflink_remap_prep() now truncates the page cache over the range that it is copying it to, and rounds that down to cover the entire start page. This removes the dirty page over the delalloc extent from the page cache without having written it back. Hence later, when the page cache is flushed, the page at offset 0x6f000 has not been written back and hence exposes stale data, which fsx trips over less than 10 operations later. Fix this by changing xfs_reflink_remap_prep() to use xfs_flush_unmap_range(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-11-20 05:31:10 +08:00
int
xfs_flush_unmap_range(
struct xfs_inode *ip,
xfs_off_t offset,
xfs_off_t len)
{
struct xfs_mount *mp = ip->i_mount;
struct inode *inode = VFS_I(ip);
xfs_off_t rounding, start, end;
int error;
/* wait for the completion of any pending DIOs */
inode_dio_wait(inode);
rounding = max_t(xfs_off_t, 1 << mp->m_sb.sb_blocklog, PAGE_SIZE);
start = round_down(offset, rounding);
end = round_up(offset + len, rounding) - 1;
error = filemap_write_and_wait_range(inode->i_mapping, start, end);
if (error)
return error;
truncate_pagecache_range(inode, start, end);
return 0;
}
int
xfs_free_file_space(
struct xfs_inode *ip,
xfs_off_t offset,
xfs_off_t len)
{
struct xfs_mount *mp = ip->i_mount;
xfs_fileoff_t startoffset_fsb;
xfs_fileoff_t endoffset_fsb;
int done = 0, error;
trace_xfs_free_file_space(ip);
error = xfs_qm_dqattach(ip);
if (error)
return error;
if (len <= 0) /* if nothing being freed */
return 0;
error = xfs_flush_unmap_range(ip, offset, len);
if (error)
return error;
startoffset_fsb = XFS_B_TO_FSB(mp, offset);
endoffset_fsb = XFS_B_TO_FSBT(mp, offset + len);
/*
* Need to zero the stuff we're not freeing, on disk.
*/
if (endoffset_fsb > startoffset_fsb) {
while (!done) {
error = xfs_unmap_extent(ip, startoffset_fsb,
endoffset_fsb - startoffset_fsb, &done);
if (error)
return error;
}
}
/*
* Now that we've unmap all full blocks we'll have to zero out any
* partial block at the beginning and/or end. iomap_zero_range is smart
* enough to skip any holes, including those we just created, but we
* must take care not to zero beyond EOF and enlarge i_size.
*/
if (offset >= XFS_ISIZE(ip))
return 0;
if (offset + len > XFS_ISIZE(ip))
len = XFS_ISIZE(ip) - offset;
error = iomap_zero_range(VFS_I(ip), offset, len, NULL,
&xfs_buffered_write_iomap_ops);
if (error)
return error;
/*
* If we zeroed right up to EOF and EOF straddles a page boundary we
* must make sure that the post-EOF area is also zeroed because the
* page could be mmap'd and iomap_zero_range doesn't do that for us.
* Writeback of the eof page will do this, albeit clumsily.
*/
if (offset + len >= XFS_ISIZE(ip) && offset_in_page(offset + len) > 0) {
error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
round_down(offset + len, PAGE_SIZE), LLONG_MAX);
}
return error;
}
xfs: rework zero range to prevent invalid i_size updates The zero range operation is analogous to fallocate with the exception of converting the range to zeroes. E.g., it attempts to allocate zeroed blocks over the range specified by the caller. The XFS implementation kills all delalloc blocks currently over the aligned range, converts the range to allocated zero blocks (unwritten extents) and handles the partial pages at the ends of the range by sending writes through the pagecache. The current implementation suffers from several problems associated with inode size. If the aligned range covers an extending I/O, said I/O is discarded and an inode size update from a previous write never makes it to disk. Further, if an unaligned zero range extends beyond eof, the page write induced for the partial end page can itself increase the inode size, even if the zero range request is not supposed to update i_size (via KEEP_SIZE, similar to an fallocate beyond EOF). The latter behavior not only incorrectly increases the inode size, but can lead to stray delalloc blocks on the inode. Typically, post-eof preallocation blocks are either truncated on release or inode eviction or explicitly written to by xfs_zero_eof() on natural file size extension. If the inode size increases due to zero range, however, associated blocks leak into the address space having never been converted or mapped to pagecache pages. A direct I/O to such an uncovered range cannot convert the extent via writeback and will BUG(). For example: $ xfs_io -fc "pwrite 0 128k" -c "fzero -k 1m 54321" <file> ... $ xfs_io -d -c "pread 128k 128k" <file> <BUG> If the entire delalloc extent happens to not have page coverage whatsoever (e.g., delalloc conversion couldn't find a large enough free space extent), even a full file writeback won't convert what's left of the extent and we'll assert on inode eviction. Rework xfs_zero_file_space() to avoid buffered I/O for partial pages. Use the existing hole punch and prealloc mechanisms as primitives for zero range. This implementation is not efficient nor ideal as we writeback dirty data over the range and remove existing extents rather than convert to unwrittern. The former writeback, however, is currently the only mechanism available to ensure consistency between pagecache and extent state. Even a pagecache truncate/delalloc punch prior to hole punch has lead to inconsistencies due to racing with writeback. This provides a consistent, correct implementation of zero range that survives fsstress/fsx testing without assert failures. The implementation can be optimized from this point forward once the fundamental issue of pagecache and delalloc extent state consistency is addressed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-30 07:35:11 +08:00
/*
* Preallocate and zero a range of a file. This mechanism has the allocation
* semantics of fallocate and in addition converts data in the range to zeroes.
*/
int
xfs_zero_file_space(
struct xfs_inode *ip,
xfs_off_t offset,
xfs_off_t len)
{
struct xfs_mount *mp = ip->i_mount;
xfs: rework zero range to prevent invalid i_size updates The zero range operation is analogous to fallocate with the exception of converting the range to zeroes. E.g., it attempts to allocate zeroed blocks over the range specified by the caller. The XFS implementation kills all delalloc blocks currently over the aligned range, converts the range to allocated zero blocks (unwritten extents) and handles the partial pages at the ends of the range by sending writes through the pagecache. The current implementation suffers from several problems associated with inode size. If the aligned range covers an extending I/O, said I/O is discarded and an inode size update from a previous write never makes it to disk. Further, if an unaligned zero range extends beyond eof, the page write induced for the partial end page can itself increase the inode size, even if the zero range request is not supposed to update i_size (via KEEP_SIZE, similar to an fallocate beyond EOF). The latter behavior not only incorrectly increases the inode size, but can lead to stray delalloc blocks on the inode. Typically, post-eof preallocation blocks are either truncated on release or inode eviction or explicitly written to by xfs_zero_eof() on natural file size extension. If the inode size increases due to zero range, however, associated blocks leak into the address space having never been converted or mapped to pagecache pages. A direct I/O to such an uncovered range cannot convert the extent via writeback and will BUG(). For example: $ xfs_io -fc "pwrite 0 128k" -c "fzero -k 1m 54321" <file> ... $ xfs_io -d -c "pread 128k 128k" <file> <BUG> If the entire delalloc extent happens to not have page coverage whatsoever (e.g., delalloc conversion couldn't find a large enough free space extent), even a full file writeback won't convert what's left of the extent and we'll assert on inode eviction. Rework xfs_zero_file_space() to avoid buffered I/O for partial pages. Use the existing hole punch and prealloc mechanisms as primitives for zero range. This implementation is not efficient nor ideal as we writeback dirty data over the range and remove existing extents rather than convert to unwrittern. The former writeback, however, is currently the only mechanism available to ensure consistency between pagecache and extent state. Even a pagecache truncate/delalloc punch prior to hole punch has lead to inconsistencies due to racing with writeback. This provides a consistent, correct implementation of zero range that survives fsstress/fsx testing without assert failures. The implementation can be optimized from this point forward once the fundamental issue of pagecache and delalloc extent state consistency is addressed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-30 07:35:11 +08:00
uint blksize;
int error;
trace_xfs_zero_file_space(ip);
xfs: rework zero range to prevent invalid i_size updates The zero range operation is analogous to fallocate with the exception of converting the range to zeroes. E.g., it attempts to allocate zeroed blocks over the range specified by the caller. The XFS implementation kills all delalloc blocks currently over the aligned range, converts the range to allocated zero blocks (unwritten extents) and handles the partial pages at the ends of the range by sending writes through the pagecache. The current implementation suffers from several problems associated with inode size. If the aligned range covers an extending I/O, said I/O is discarded and an inode size update from a previous write never makes it to disk. Further, if an unaligned zero range extends beyond eof, the page write induced for the partial end page can itself increase the inode size, even if the zero range request is not supposed to update i_size (via KEEP_SIZE, similar to an fallocate beyond EOF). The latter behavior not only incorrectly increases the inode size, but can lead to stray delalloc blocks on the inode. Typically, post-eof preallocation blocks are either truncated on release or inode eviction or explicitly written to by xfs_zero_eof() on natural file size extension. If the inode size increases due to zero range, however, associated blocks leak into the address space having never been converted or mapped to pagecache pages. A direct I/O to such an uncovered range cannot convert the extent via writeback and will BUG(). For example: $ xfs_io -fc "pwrite 0 128k" -c "fzero -k 1m 54321" <file> ... $ xfs_io -d -c "pread 128k 128k" <file> <BUG> If the entire delalloc extent happens to not have page coverage whatsoever (e.g., delalloc conversion couldn't find a large enough free space extent), even a full file writeback won't convert what's left of the extent and we'll assert on inode eviction. Rework xfs_zero_file_space() to avoid buffered I/O for partial pages. Use the existing hole punch and prealloc mechanisms as primitives for zero range. This implementation is not efficient nor ideal as we writeback dirty data over the range and remove existing extents rather than convert to unwrittern. The former writeback, however, is currently the only mechanism available to ensure consistency between pagecache and extent state. Even a pagecache truncate/delalloc punch prior to hole punch has lead to inconsistencies due to racing with writeback. This provides a consistent, correct implementation of zero range that survives fsstress/fsx testing without assert failures. The implementation can be optimized from this point forward once the fundamental issue of pagecache and delalloc extent state consistency is addressed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-30 07:35:11 +08:00
blksize = 1 << mp->m_sb.sb_blocklog;
/*
xfs: rework zero range to prevent invalid i_size updates The zero range operation is analogous to fallocate with the exception of converting the range to zeroes. E.g., it attempts to allocate zeroed blocks over the range specified by the caller. The XFS implementation kills all delalloc blocks currently over the aligned range, converts the range to allocated zero blocks (unwritten extents) and handles the partial pages at the ends of the range by sending writes through the pagecache. The current implementation suffers from several problems associated with inode size. If the aligned range covers an extending I/O, said I/O is discarded and an inode size update from a previous write never makes it to disk. Further, if an unaligned zero range extends beyond eof, the page write induced for the partial end page can itself increase the inode size, even if the zero range request is not supposed to update i_size (via KEEP_SIZE, similar to an fallocate beyond EOF). The latter behavior not only incorrectly increases the inode size, but can lead to stray delalloc blocks on the inode. Typically, post-eof preallocation blocks are either truncated on release or inode eviction or explicitly written to by xfs_zero_eof() on natural file size extension. If the inode size increases due to zero range, however, associated blocks leak into the address space having never been converted or mapped to pagecache pages. A direct I/O to such an uncovered range cannot convert the extent via writeback and will BUG(). For example: $ xfs_io -fc "pwrite 0 128k" -c "fzero -k 1m 54321" <file> ... $ xfs_io -d -c "pread 128k 128k" <file> <BUG> If the entire delalloc extent happens to not have page coverage whatsoever (e.g., delalloc conversion couldn't find a large enough free space extent), even a full file writeback won't convert what's left of the extent and we'll assert on inode eviction. Rework xfs_zero_file_space() to avoid buffered I/O for partial pages. Use the existing hole punch and prealloc mechanisms as primitives for zero range. This implementation is not efficient nor ideal as we writeback dirty data over the range and remove existing extents rather than convert to unwrittern. The former writeback, however, is currently the only mechanism available to ensure consistency between pagecache and extent state. Even a pagecache truncate/delalloc punch prior to hole punch has lead to inconsistencies due to racing with writeback. This provides a consistent, correct implementation of zero range that survives fsstress/fsx testing without assert failures. The implementation can be optimized from this point forward once the fundamental issue of pagecache and delalloc extent state consistency is addressed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-30 07:35:11 +08:00
* Punch a hole and prealloc the range. We use hole punch rather than
* unwritten extent conversion for two reasons:
*
* 1.) Hole punch handles partial block zeroing for us.
*
* 2.) If prealloc returns ENOSPC, the file range is still zero-valued
* by virtue of the hole punch.
*/
xfs: rework zero range to prevent invalid i_size updates The zero range operation is analogous to fallocate with the exception of converting the range to zeroes. E.g., it attempts to allocate zeroed blocks over the range specified by the caller. The XFS implementation kills all delalloc blocks currently over the aligned range, converts the range to allocated zero blocks (unwritten extents) and handles the partial pages at the ends of the range by sending writes through the pagecache. The current implementation suffers from several problems associated with inode size. If the aligned range covers an extending I/O, said I/O is discarded and an inode size update from a previous write never makes it to disk. Further, if an unaligned zero range extends beyond eof, the page write induced for the partial end page can itself increase the inode size, even if the zero range request is not supposed to update i_size (via KEEP_SIZE, similar to an fallocate beyond EOF). The latter behavior not only incorrectly increases the inode size, but can lead to stray delalloc blocks on the inode. Typically, post-eof preallocation blocks are either truncated on release or inode eviction or explicitly written to by xfs_zero_eof() on natural file size extension. If the inode size increases due to zero range, however, associated blocks leak into the address space having never been converted or mapped to pagecache pages. A direct I/O to such an uncovered range cannot convert the extent via writeback and will BUG(). For example: $ xfs_io -fc "pwrite 0 128k" -c "fzero -k 1m 54321" <file> ... $ xfs_io -d -c "pread 128k 128k" <file> <BUG> If the entire delalloc extent happens to not have page coverage whatsoever (e.g., delalloc conversion couldn't find a large enough free space extent), even a full file writeback won't convert what's left of the extent and we'll assert on inode eviction. Rework xfs_zero_file_space() to avoid buffered I/O for partial pages. Use the existing hole punch and prealloc mechanisms as primitives for zero range. This implementation is not efficient nor ideal as we writeback dirty data over the range and remove existing extents rather than convert to unwrittern. The former writeback, however, is currently the only mechanism available to ensure consistency between pagecache and extent state. Even a pagecache truncate/delalloc punch prior to hole punch has lead to inconsistencies due to racing with writeback. This provides a consistent, correct implementation of zero range that survives fsstress/fsx testing without assert failures. The implementation can be optimized from this point forward once the fundamental issue of pagecache and delalloc extent state consistency is addressed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-30 07:35:11 +08:00
error = xfs_free_file_space(ip, offset, len);
xfs: introduce an always_cow mode Add a mode where XFS never overwrites existing blocks in place. This is to aid debugging our COW code, and also put infatructure in place for things like possible future support for zoned block devices, which can't support overwrites. This mode is enabled globally by doing a: echo 1 > /sys/fs/xfs/debug/always_cow Note that the parameter is global to allow running all tests in xfstests easily in this mode, which would not easily be possible with a per-fs sysfs file. In always_cow mode persistent preallocations are disabled, and fallocate will fail when called with a 0 mode (with our without FALLOC_FL_KEEP_SIZE), and not create unwritten extent for zeroed space when called with FALLOC_FL_ZERO_RANGE or FALLOC_FL_UNSHARE_RANGE. There are a few interesting xfstests failures when run in always_cow mode: - generic/392 fails because the bytes used in the file used to test hole punch recovery are less after the log replay. This is because the blocks written and then punched out are only freed with a delay due to the logging mechanism. - xfs/170 will fail as the already fragile file streams mechanism doesn't seem to interact well with the COW allocator - xfs/180 xfs/182 xfs/192 xfs/198 xfs/204 and xfs/208 will claim the file system is badly fragmented, but there is not much we can do to avoid that when always writing out of place - xfs/205 fails because overwriting a file in always_cow mode will require new space allocation and the assumption in the test thus don't work anymore. - xfs/326 fails to modify the file at all in always_cow mode after injecting the refcount error, leading to an unexpected md5sum after the remount, but that again is expected Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-19 01:38:49 +08:00
if (error || xfs_is_always_cow_inode(ip))
return error;
xfs: introduce an always_cow mode Add a mode where XFS never overwrites existing blocks in place. This is to aid debugging our COW code, and also put infatructure in place for things like possible future support for zoned block devices, which can't support overwrites. This mode is enabled globally by doing a: echo 1 > /sys/fs/xfs/debug/always_cow Note that the parameter is global to allow running all tests in xfstests easily in this mode, which would not easily be possible with a per-fs sysfs file. In always_cow mode persistent preallocations are disabled, and fallocate will fail when called with a 0 mode (with our without FALLOC_FL_KEEP_SIZE), and not create unwritten extent for zeroed space when called with FALLOC_FL_ZERO_RANGE or FALLOC_FL_UNSHARE_RANGE. There are a few interesting xfstests failures when run in always_cow mode: - generic/392 fails because the bytes used in the file used to test hole punch recovery are less after the log replay. This is because the blocks written and then punched out are only freed with a delay due to the logging mechanism. - xfs/170 will fail as the already fragile file streams mechanism doesn't seem to interact well with the COW allocator - xfs/180 xfs/182 xfs/192 xfs/198 xfs/204 and xfs/208 will claim the file system is badly fragmented, but there is not much we can do to avoid that when always writing out of place - xfs/205 fails because overwriting a file in always_cow mode will require new space allocation and the assumption in the test thus don't work anymore. - xfs/326 fails to modify the file at all in always_cow mode after injecting the refcount error, leading to an unexpected md5sum after the remount, but that again is expected Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-19 01:38:49 +08:00
return xfs_alloc_file_space(ip, round_down(offset, blksize),
xfs: rework zero range to prevent invalid i_size updates The zero range operation is analogous to fallocate with the exception of converting the range to zeroes. E.g., it attempts to allocate zeroed blocks over the range specified by the caller. The XFS implementation kills all delalloc blocks currently over the aligned range, converts the range to allocated zero blocks (unwritten extents) and handles the partial pages at the ends of the range by sending writes through the pagecache. The current implementation suffers from several problems associated with inode size. If the aligned range covers an extending I/O, said I/O is discarded and an inode size update from a previous write never makes it to disk. Further, if an unaligned zero range extends beyond eof, the page write induced for the partial end page can itself increase the inode size, even if the zero range request is not supposed to update i_size (via KEEP_SIZE, similar to an fallocate beyond EOF). The latter behavior not only incorrectly increases the inode size, but can lead to stray delalloc blocks on the inode. Typically, post-eof preallocation blocks are either truncated on release or inode eviction or explicitly written to by xfs_zero_eof() on natural file size extension. If the inode size increases due to zero range, however, associated blocks leak into the address space having never been converted or mapped to pagecache pages. A direct I/O to such an uncovered range cannot convert the extent via writeback and will BUG(). For example: $ xfs_io -fc "pwrite 0 128k" -c "fzero -k 1m 54321" <file> ... $ xfs_io -d -c "pread 128k 128k" <file> <BUG> If the entire delalloc extent happens to not have page coverage whatsoever (e.g., delalloc conversion couldn't find a large enough free space extent), even a full file writeback won't convert what's left of the extent and we'll assert on inode eviction. Rework xfs_zero_file_space() to avoid buffered I/O for partial pages. Use the existing hole punch and prealloc mechanisms as primitives for zero range. This implementation is not efficient nor ideal as we writeback dirty data over the range and remove existing extents rather than convert to unwrittern. The former writeback, however, is currently the only mechanism available to ensure consistency between pagecache and extent state. Even a pagecache truncate/delalloc punch prior to hole punch has lead to inconsistencies due to racing with writeback. This provides a consistent, correct implementation of zero range that survives fsstress/fsx testing without assert failures. The implementation can be optimized from this point forward once the fundamental issue of pagecache and delalloc extent state consistency is addressed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-30 07:35:11 +08:00
round_up(offset + len, blksize) -
round_down(offset, blksize),
XFS_BMAPI_PREALLOC);
}
static int
xfs_prepare_shift(
struct xfs_inode *ip,
loff_t offset)
{
int error;
xfs: writeback and inval. file range to be shifted by collapse The collapse range operation currently writes the entire file before starting the collapse to avoid changes in the in-core extent list due to writeback causing the extent count to change. Now that collapse range is fsb based rather than extent index based it can sustain changes in the extent list during the shift sequence without disruption. Modify xfs_collapse_file_space() to writeback and invalidate pages associated with the range of the file to be shifted. xfs_free_file_space() currently has similar behavior, but the space free need only affect the region of the file that is freed and this could change in the future. Also update the comments to reflect the current implementation. We retain the eofblocks trim permanently as a best option for dealing with delalloc extents. We don't shift delalloc extents because this scenario only occurs with post-eof preallocation (since data must be flushed such that the cache can be invalidated and data can be shifted). That means said space must also be initialized before being shifted into the accessible region of the file only to be immediately truncated off as the last part of the collapse. In other words, the eofblocks trim will happen anyways, we just run it first to ensure the file remains in a consistent state throughout the collapse. Finally, detect and fail explicitly in the event of a delalloc extent during the extent shift. The implementation does not support delalloc extents and the caller is expected to prevent this scenario in advance as is done by collapse. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-09-23 13:39:05 +08:00
/*
* Trim eofblocks to avoid shifting uninitialized post-eof preallocation
* into the accessible region of the file.
*/
if (xfs_can_free_eofblocks(ip, true)) {
error = xfs_free_eofblocks(ip);
if (error)
return error;
}
xfs: xfs_file_collapse_range is delalloc challenged If we have delalloc extents on a file before we run a collapse range opertaion, we sync the range that we are going to collapse to convert delalloc extents in that region to real extents to simplify the shift operation. However, the shift operation then assumes that the extent list is not going to change as it iterates over the extent list moving things about. Unfortunately, this isn't true because we can't hold the ILOCK over all the operations. We can prevent new IO from modifying the extent list by holding the IOLOCK, but that doesn't prevent writeback from running.... And when writeback runs, it can convert delalloc extents is the range of the file prior to the region being collapsed, and this changes the indexes of all the extents in the file. That causes the collapse range operation to Go Bad. The right fix is to rewrite the extent shift operation not to be dependent on the extent list not changing across the entire operation, but this is a fairly significant piece of work to do. Hence, as a short-term workaround for the problem, sync the entire file before starting a collapse operation to remove all delalloc ranges from the file and so avoid the problem of concurrent writeback changing the extent list. Diagnosed-and-Reported-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-09-02 10:12:53 +08:00
xfs: writeback and inval. file range to be shifted by collapse The collapse range operation currently writes the entire file before starting the collapse to avoid changes in the in-core extent list due to writeback causing the extent count to change. Now that collapse range is fsb based rather than extent index based it can sustain changes in the extent list during the shift sequence without disruption. Modify xfs_collapse_file_space() to writeback and invalidate pages associated with the range of the file to be shifted. xfs_free_file_space() currently has similar behavior, but the space free need only affect the region of the file that is freed and this could change in the future. Also update the comments to reflect the current implementation. We retain the eofblocks trim permanently as a best option for dealing with delalloc extents. We don't shift delalloc extents because this scenario only occurs with post-eof preallocation (since data must be flushed such that the cache can be invalidated and data can be shifted). That means said space must also be initialized before being shifted into the accessible region of the file only to be immediately truncated off as the last part of the collapse. In other words, the eofblocks trim will happen anyways, we just run it first to ensure the file remains in a consistent state throughout the collapse. Finally, detect and fail explicitly in the event of a delalloc extent during the extent shift. The implementation does not support delalloc extents and the caller is expected to prevent this scenario in advance as is done by collapse. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-09-23 13:39:05 +08:00
/*
* Writeback and invalidate cache for the remainder of the file as we're
* about to shift down every extent from offset to EOF.
xfs: writeback and inval. file range to be shifted by collapse The collapse range operation currently writes the entire file before starting the collapse to avoid changes in the in-core extent list due to writeback causing the extent count to change. Now that collapse range is fsb based rather than extent index based it can sustain changes in the extent list during the shift sequence without disruption. Modify xfs_collapse_file_space() to writeback and invalidate pages associated with the range of the file to be shifted. xfs_free_file_space() currently has similar behavior, but the space free need only affect the region of the file that is freed and this could change in the future. Also update the comments to reflect the current implementation. We retain the eofblocks trim permanently as a best option for dealing with delalloc extents. We don't shift delalloc extents because this scenario only occurs with post-eof preallocation (since data must be flushed such that the cache can be invalidated and data can be shifted). That means said space must also be initialized before being shifted into the accessible region of the file only to be immediately truncated off as the last part of the collapse. In other words, the eofblocks trim will happen anyways, we just run it first to ensure the file remains in a consistent state throughout the collapse. Finally, detect and fail explicitly in the event of a delalloc extent during the extent shift. The implementation does not support delalloc extents and the caller is expected to prevent this scenario in advance as is done by collapse. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-09-23 13:39:05 +08:00
*/
error = xfs_flush_unmap_range(ip, offset, XFS_ISIZE(ip));
if (error)
return error;
/*
* Clean out anything hanging around in the cow fork now that
* we've flushed all the dirty data out to disk to avoid having
* CoW extents at the wrong offsets.
*/
if (xfs_inode_has_cow_data(ip)) {
error = xfs_reflink_cancel_cow_range(ip, offset, NULLFILEOFF,
true);
if (error)
return error;
}
return 0;
}
/*
* xfs_collapse_file_space()
* This routine frees disk space and shift extent for the given file.
* The first thing we do is to free data blocks in the specified range
* by calling xfs_free_file_space(). It would also sync dirty data
* and invalidate page cache over the region on which collapse range
* is working. And Shift extent records to the left to cover a hole.
* RETURNS:
* 0 on success
* errno on error
*
*/
int
xfs_collapse_file_space(
struct xfs_inode *ip,
xfs_off_t offset,
xfs_off_t len)
{
struct xfs_mount *mp = ip->i_mount;
struct xfs_trans *tp;
int error;
xfs_fileoff_t next_fsb = XFS_B_TO_FSB(mp, offset + len);
xfs_fileoff_t shift_fsb = XFS_B_TO_FSB(mp, len);
uint resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0);
bool done = false;
ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL));
ASSERT(xfs_isilocked(ip, XFS_MMAPLOCK_EXCL));
trace_xfs_collapse_file_space(ip);
error = xfs_free_file_space(ip, offset, len);
if (error)
return error;
error = xfs_prepare_shift(ip, offset);
if (error)
return error;
while (!error && !done) {
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_write, resblks, 0, 0,
&tp);
if (error)
break;
xfs_ilock(ip, XFS_ILOCK_EXCL);
error = xfs_trans_reserve_quota(tp, mp, ip->i_udquot,
ip->i_gdquot, ip->i_pdquot, resblks, 0,
XFS_QMOPT_RES_REGBLKS);
if (error)
goto out_trans_cancel;
xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
error = xfs_bmap_collapse_extents(tp, ip, &next_fsb, shift_fsb,
&done);
if (error)
goto out_trans_cancel;
error = xfs_trans_commit(tp);
}
return error;
out_trans_cancel:
xfs_trans_cancel(tp);
return error;
}
/*
* xfs_insert_file_space()
* This routine create hole space by shifting extents for the given file.
* The first thing we do is to sync dirty data and invalidate page cache
* over the region on which insert range is working. And split an extent
* to two extents at given offset by calling xfs_bmap_split_extent.
* And shift all extent records which are laying between [offset,
* last allocated extent] to the right to reserve hole range.
* RETURNS:
* 0 on success
* errno on error
*/
int
xfs_insert_file_space(
struct xfs_inode *ip,
loff_t offset,
loff_t len)
{
struct xfs_mount *mp = ip->i_mount;
struct xfs_trans *tp;
int error;
xfs_fileoff_t stop_fsb = XFS_B_TO_FSB(mp, offset);
xfs_fileoff_t next_fsb = NULLFSBLOCK;
xfs_fileoff_t shift_fsb = XFS_B_TO_FSB(mp, len);
bool done = false;
ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL));
ASSERT(xfs_isilocked(ip, XFS_MMAPLOCK_EXCL));
trace_xfs_insert_file_space(ip);
error = xfs_bmap_can_insert_extents(ip, stop_fsb, shift_fsb);
if (error)
return error;
error = xfs_prepare_shift(ip, offset);
if (error)
return error;
/*
* The extent shifting code works on extent granularity. So, if stop_fsb
* is not the starting block of extent, we need to split the extent at
* stop_fsb.
*/
error = xfs_bmap_split_extent(ip, stop_fsb);
if (error)
return error;
while (!error && !done) {
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_write, 0, 0, 0,
&tp);
if (error)
break;
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
error = xfs_bmap_insert_extents(tp, ip, &next_fsb, shift_fsb,
&done, stop_fsb);
if (error)
goto out_trans_cancel;
error = xfs_trans_commit(tp);
}
return error;
out_trans_cancel:
xfs_trans_cancel(tp);
return error;
}
/*
* We need to check that the format of the data fork in the temporary inode is
* valid for the target inode before doing the swap. This is not a problem with
* attr1 because of the fixed fork offset, but attr2 has a dynamically sized
* data fork depending on the space the attribute fork is taking so we can get
* invalid formats on the target inode.
*
* E.g. target has space for 7 extents in extent format, temp inode only has
* space for 6. If we defragment down to 7 extents, then the tmp format is a
* btree, but when swapped it needs to be in extent format. Hence we can't just
* blindly swap data forks on attr2 filesystems.
*
* Note that we check the swap in both directions so that we don't end up with
* a corrupt temporary inode, either.
*
* Note that fixing the way xfs_fsr sets up the attribute fork in the source
* inode will prevent this situation from occurring, so all we do here is
* reject and log the attempt. basically we are putting the responsibility on
* userspace to get this right.
*/
static int
xfs_swap_extents_check_format(
struct xfs_inode *ip, /* target inode */
struct xfs_inode *tip) /* tmp inode */
{
/* Should never get a local format */
if (ip->i_d.di_format == XFS_DINODE_FMT_LOCAL ||
tip->i_d.di_format == XFS_DINODE_FMT_LOCAL)
return -EINVAL;
/*
* if the target inode has less extents that then temporary inode then
* why did userspace call us?
*/
if (ip->i_d.di_nextents < tip->i_d.di_nextents)
return -EINVAL;
/*
* If we have to use the (expensive) rmap swap method, we can
* handle any number of extents and any format.
*/
if (xfs_sb_version_hasrmapbt(&ip->i_mount->m_sb))
return 0;
/*
* if the target inode is in extent form and the temp inode is in btree
* form then we will end up with the target inode in the wrong format
* as we already know there are less extents in the temp inode.
*/
if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
tip->i_d.di_format == XFS_DINODE_FMT_BTREE)
return -EINVAL;
/* Check temp in extent form to max in target */
if (tip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
XFS_IFORK_NEXTENTS(tip, XFS_DATA_FORK) >
XFS_IFORK_MAXEXT(ip, XFS_DATA_FORK))
return -EINVAL;
/* Check target in extent form to max in temp */
if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
XFS_IFORK_NEXTENTS(ip, XFS_DATA_FORK) >
XFS_IFORK_MAXEXT(tip, XFS_DATA_FORK))
return -EINVAL;
/*
* If we are in a btree format, check that the temp root block will fit
* in the target and that it has enough extents to be in btree format
* in the target.
*
* Note that we have to be careful to allow btree->extent conversions
* (a common defrag case) which will occur when the temp inode is in
* extent format...
*/
if (tip->i_d.di_format == XFS_DINODE_FMT_BTREE) {
if (XFS_IFORK_Q(ip) &&
XFS_BMAP_BMDR_SPACE(tip->i_df.if_broot) > XFS_IFORK_BOFF(ip))
return -EINVAL;
if (XFS_IFORK_NEXTENTS(tip, XFS_DATA_FORK) <=
XFS_IFORK_MAXEXT(ip, XFS_DATA_FORK))
return -EINVAL;
}
/* Reciprocal target->temp btree format checks */
if (ip->i_d.di_format == XFS_DINODE_FMT_BTREE) {
if (XFS_IFORK_Q(tip) &&
XFS_BMAP_BMDR_SPACE(ip->i_df.if_broot) > XFS_IFORK_BOFF(tip))
return -EINVAL;
if (XFS_IFORK_NEXTENTS(ip, XFS_DATA_FORK) <=
XFS_IFORK_MAXEXT(tip, XFS_DATA_FORK))
return -EINVAL;
}
return 0;
}
static int
xfs_swap_extent_flush(
struct xfs_inode *ip)
{
int error;
error = filemap_write_and_wait(VFS_I(ip)->i_mapping);
if (error)
return error;
truncate_pagecache_range(VFS_I(ip), 0, -1);
/* Verify O_DIRECT for ftmp */
if (VFS_I(ip)->i_mapping->nrpages)
return -EINVAL;
return 0;
}
/*
* Move extents from one file to another, when rmap is enabled.
*/
STATIC int
xfs_swap_extent_rmap(
struct xfs_trans **tpp,
struct xfs_inode *ip,
struct xfs_inode *tip)
{
struct xfs_trans *tp = *tpp;
struct xfs_bmbt_irec irec;
struct xfs_bmbt_irec uirec;
struct xfs_bmbt_irec tirec;
xfs_fileoff_t offset_fsb;
xfs_fileoff_t end_fsb;
xfs_filblks_t count_fsb;
int error;
xfs_filblks_t ilen;
xfs_filblks_t rlen;
int nimaps;
uint64_t tip_flags2;
/*
* If the source file has shared blocks, we must flag the donor
* file as having shared blocks so that we get the shared-block
* rmap functions when we go to fix up the rmaps. The flags
* will be switch for reals later.
*/
tip_flags2 = tip->i_d.di_flags2;
if (ip->i_d.di_flags2 & XFS_DIFLAG2_REFLINK)
tip->i_d.di_flags2 |= XFS_DIFLAG2_REFLINK;
offset_fsb = 0;
end_fsb = XFS_B_TO_FSB(ip->i_mount, i_size_read(VFS_I(ip)));
count_fsb = (xfs_filblks_t)(end_fsb - offset_fsb);
while (count_fsb) {
/* Read extent from the donor file */
nimaps = 1;
error = xfs_bmapi_read(tip, offset_fsb, count_fsb, &tirec,
&nimaps, 0);
if (error)
goto out;
ASSERT(nimaps == 1);
ASSERT(tirec.br_startblock != DELAYSTARTBLOCK);
trace_xfs_swap_extent_rmap_remap(tip, &tirec);
ilen = tirec.br_blockcount;
/* Unmap the old blocks in the source file. */
while (tirec.br_blockcount) {
ASSERT(tp->t_firstblock == NULLFSBLOCK);
trace_xfs_swap_extent_rmap_remap_piece(tip, &tirec);
/* Read extent from the source file */
nimaps = 1;
error = xfs_bmapi_read(ip, tirec.br_startoff,
tirec.br_blockcount, &irec,
&nimaps, 0);
if (error)
goto out;
ASSERT(nimaps == 1);
ASSERT(tirec.br_startoff == irec.br_startoff);
trace_xfs_swap_extent_rmap_remap_piece(ip, &irec);
/* Trim the extent. */
uirec = tirec;
uirec.br_blockcount = rlen = min_t(xfs_filblks_t,
tirec.br_blockcount,
irec.br_blockcount);
trace_xfs_swap_extent_rmap_remap_piece(tip, &uirec);
/* Remove the mapping from the donor file. */
xfs_bmap_unmap_extent(tp, tip, &uirec);
/* Remove the mapping from the source file. */
xfs_bmap_unmap_extent(tp, ip, &irec);
/* Map the donor file's blocks into the source file. */
xfs_bmap_map_extent(tp, ip, &uirec);
/* Map the source file's blocks into the donor file. */
xfs_bmap_map_extent(tp, tip, &irec);
error = xfs_defer_finish(tpp);
tp = *tpp;
if (error)
goto out;
tirec.br_startoff += rlen;
if (tirec.br_startblock != HOLESTARTBLOCK &&
tirec.br_startblock != DELAYSTARTBLOCK)
tirec.br_startblock += rlen;
tirec.br_blockcount -= rlen;
}
/* Roll on... */
count_fsb -= ilen;
offset_fsb += ilen;
}
tip->i_d.di_flags2 = tip_flags2;
return 0;
out:
trace_xfs_swap_extent_rmap_error(ip, error, _RET_IP_);
tip->i_d.di_flags2 = tip_flags2;
return error;
}
/* Swap the extents of two files by swapping data forks. */
STATIC int
xfs_swap_extent_forks(
struct xfs_trans *tp,
struct xfs_inode *ip,
struct xfs_inode *tip,
int *src_log_flags,
int *target_log_flags)
{
xfs_filblks_t aforkblks = 0;
xfs_filblks_t taforkblks = 0;
xfs_extnum_t junk;
uint64_t tmp;
int error;
/*
* Count the number of extended attribute blocks
*/
if ( ((XFS_IFORK_Q(ip) != 0) && (ip->i_d.di_anextents > 0)) &&
(ip->i_d.di_aformat != XFS_DINODE_FMT_LOCAL)) {
error = xfs_bmap_count_blocks(tp, ip, XFS_ATTR_FORK, &junk,
&aforkblks);
if (error)
return error;
}
if ( ((XFS_IFORK_Q(tip) != 0) && (tip->i_d.di_anextents > 0)) &&
(tip->i_d.di_aformat != XFS_DINODE_FMT_LOCAL)) {
error = xfs_bmap_count_blocks(tp, tip, XFS_ATTR_FORK, &junk,
&taforkblks);
if (error)
return error;
}
xfs: swap extents operations for CRC filesystems For CRC enabled filesystems, we can't just swap inode forks from one inode to another when defragmenting a file - the blocks in the inode fork bmap btree contain pointers back to the owner inode. Hence if we are to swap the inode forks we have to atomically modify every block in the btree during the transaction. We are doing an entire fork swap here, so we could create a new transaction item type that indicates we are changing the owner of a certain structure from one value to another. If we combine this with ordered buffer logging to modify all the buffers in the tree, then we can change the buffers in the tree without needing log space for the operation. However, this then requires log recovery to perform the modification of the owner information of the objects/structures in question. This does introduce some interesting ordering details into recovery: we have to make sure that the owner change replay occurs after the change that moves the objects is made, not before. Hence we can't use a separate log item for this as we have no guarantee of strict ordering between multiple items in the log due to the relogging action of asynchronous transaction commits. Hence there is no "generic" method we can use for changing the ownership of arbitrary metadata structures. For inode forks, however, there is a simple method of communicating that the fork contents need the owner rewritten - we can pass a inode log format flag for the fork for the transaction that does a fork swap. This flag will then follow the inode fork through relogging actions so when the swap actually gets replayed the ownership can be changed immediately by log recovery. So that gives us a simple method of "whole fork" exchange between two inodes. This is relatively simple to implement, so it makes sense to do this as an initial implementation to support xfs_fsr on CRC enabled filesytems in the same manner as we do on existing filesystems. This commit introduces the swapext driven functionality, the recovery functionality will be in a separate patch. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 08:23:44 +08:00
/*
xfs: move bmbt owner change to last step of extent swap The extent swap operation currently resets bmbt block owners before the inode forks are swapped. The bmbt buffers are marked as ordered so they do not have to be physically logged in the transaction. This use of ordered buffers is not safe as bmbt buffers may have been previously physically logged. The bmbt owner change algorithm needs to be updated to physically log buffers that are already dirty when/if they are encountered. This means that an extent swap will eventually require multiple rolling transactions to handle large btrees. In addition, all inode related changes must be logged before the bmbt owner change scan begins and can roll the transaction for the first time to preserve fs consistency via log recovery. In preparation for such fixes to the bmbt owner change algorithm, refactor the bmbt scan out of the extent fork swap code to the last operation before the transaction is committed. Update xfs_swap_extent_forks() to only set the inode log flags when an owner change scan is necessary. Update xfs_swap_extents() to trigger the owner change based on the inode log flags. Note that since the owner change now occurs after the extent fork swap, the inode btrees must be fixed up with the inode number of the current inode (similar to log recovery). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-08-30 01:08:39 +08:00
* Btree format (v3) inodes have the inode number stamped in the bmbt
* block headers. We can't start changing the bmbt blocks until the
* inode owner change is logged so recovery does the right thing in the
* event of a crash. Set the owner change log flags now and leave the
* bmbt scan as the last step.
xfs: swap extents operations for CRC filesystems For CRC enabled filesystems, we can't just swap inode forks from one inode to another when defragmenting a file - the blocks in the inode fork bmap btree contain pointers back to the owner inode. Hence if we are to swap the inode forks we have to atomically modify every block in the btree during the transaction. We are doing an entire fork swap here, so we could create a new transaction item type that indicates we are changing the owner of a certain structure from one value to another. If we combine this with ordered buffer logging to modify all the buffers in the tree, then we can change the buffers in the tree without needing log space for the operation. However, this then requires log recovery to perform the modification of the owner information of the objects/structures in question. This does introduce some interesting ordering details into recovery: we have to make sure that the owner change replay occurs after the change that moves the objects is made, not before. Hence we can't use a separate log item for this as we have no guarantee of strict ordering between multiple items in the log due to the relogging action of asynchronous transaction commits. Hence there is no "generic" method we can use for changing the ownership of arbitrary metadata structures. For inode forks, however, there is a simple method of communicating that the fork contents need the owner rewritten - we can pass a inode log format flag for the fork for the transaction that does a fork swap. This flag will then follow the inode fork through relogging actions so when the swap actually gets replayed the ownership can be changed immediately by log recovery. So that gives us a simple method of "whole fork" exchange between two inodes. This is relatively simple to implement, so it makes sense to do this as an initial implementation to support xfs_fsr on CRC enabled filesytems in the same manner as we do on existing filesystems. This commit introduces the swapext driven functionality, the recovery functionality will be in a separate patch. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 08:23:44 +08:00
*/
if (ip->i_d.di_version == 3 &&
xfs: move bmbt owner change to last step of extent swap The extent swap operation currently resets bmbt block owners before the inode forks are swapped. The bmbt buffers are marked as ordered so they do not have to be physically logged in the transaction. This use of ordered buffers is not safe as bmbt buffers may have been previously physically logged. The bmbt owner change algorithm needs to be updated to physically log buffers that are already dirty when/if they are encountered. This means that an extent swap will eventually require multiple rolling transactions to handle large btrees. In addition, all inode related changes must be logged before the bmbt owner change scan begins and can roll the transaction for the first time to preserve fs consistency via log recovery. In preparation for such fixes to the bmbt owner change algorithm, refactor the bmbt scan out of the extent fork swap code to the last operation before the transaction is committed. Update xfs_swap_extent_forks() to only set the inode log flags when an owner change scan is necessary. Update xfs_swap_extents() to trigger the owner change based on the inode log flags. Note that since the owner change now occurs after the extent fork swap, the inode btrees must be fixed up with the inode number of the current inode (similar to log recovery). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-08-30 01:08:39 +08:00
ip->i_d.di_format == XFS_DINODE_FMT_BTREE)
(*target_log_flags) |= XFS_ILOG_DOWNER;
xfs: swap extents operations for CRC filesystems For CRC enabled filesystems, we can't just swap inode forks from one inode to another when defragmenting a file - the blocks in the inode fork bmap btree contain pointers back to the owner inode. Hence if we are to swap the inode forks we have to atomically modify every block in the btree during the transaction. We are doing an entire fork swap here, so we could create a new transaction item type that indicates we are changing the owner of a certain structure from one value to another. If we combine this with ordered buffer logging to modify all the buffers in the tree, then we can change the buffers in the tree without needing log space for the operation. However, this then requires log recovery to perform the modification of the owner information of the objects/structures in question. This does introduce some interesting ordering details into recovery: we have to make sure that the owner change replay occurs after the change that moves the objects is made, not before. Hence we can't use a separate log item for this as we have no guarantee of strict ordering between multiple items in the log due to the relogging action of asynchronous transaction commits. Hence there is no "generic" method we can use for changing the ownership of arbitrary metadata structures. For inode forks, however, there is a simple method of communicating that the fork contents need the owner rewritten - we can pass a inode log format flag for the fork for the transaction that does a fork swap. This flag will then follow the inode fork through relogging actions so when the swap actually gets replayed the ownership can be changed immediately by log recovery. So that gives us a simple method of "whole fork" exchange between two inodes. This is relatively simple to implement, so it makes sense to do this as an initial implementation to support xfs_fsr on CRC enabled filesytems in the same manner as we do on existing filesystems. This commit introduces the swapext driven functionality, the recovery functionality will be in a separate patch. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 08:23:44 +08:00
if (tip->i_d.di_version == 3 &&
xfs: move bmbt owner change to last step of extent swap The extent swap operation currently resets bmbt block owners before the inode forks are swapped. The bmbt buffers are marked as ordered so they do not have to be physically logged in the transaction. This use of ordered buffers is not safe as bmbt buffers may have been previously physically logged. The bmbt owner change algorithm needs to be updated to physically log buffers that are already dirty when/if they are encountered. This means that an extent swap will eventually require multiple rolling transactions to handle large btrees. In addition, all inode related changes must be logged before the bmbt owner change scan begins and can roll the transaction for the first time to preserve fs consistency via log recovery. In preparation for such fixes to the bmbt owner change algorithm, refactor the bmbt scan out of the extent fork swap code to the last operation before the transaction is committed. Update xfs_swap_extent_forks() to only set the inode log flags when an owner change scan is necessary. Update xfs_swap_extents() to trigger the owner change based on the inode log flags. Note that since the owner change now occurs after the extent fork swap, the inode btrees must be fixed up with the inode number of the current inode (similar to log recovery). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-08-30 01:08:39 +08:00
tip->i_d.di_format == XFS_DINODE_FMT_BTREE)
(*src_log_flags) |= XFS_ILOG_DOWNER;
xfs: swap extents operations for CRC filesystems For CRC enabled filesystems, we can't just swap inode forks from one inode to another when defragmenting a file - the blocks in the inode fork bmap btree contain pointers back to the owner inode. Hence if we are to swap the inode forks we have to atomically modify every block in the btree during the transaction. We are doing an entire fork swap here, so we could create a new transaction item type that indicates we are changing the owner of a certain structure from one value to another. If we combine this with ordered buffer logging to modify all the buffers in the tree, then we can change the buffers in the tree without needing log space for the operation. However, this then requires log recovery to perform the modification of the owner information of the objects/structures in question. This does introduce some interesting ordering details into recovery: we have to make sure that the owner change replay occurs after the change that moves the objects is made, not before. Hence we can't use a separate log item for this as we have no guarantee of strict ordering between multiple items in the log due to the relogging action of asynchronous transaction commits. Hence there is no "generic" method we can use for changing the ownership of arbitrary metadata structures. For inode forks, however, there is a simple method of communicating that the fork contents need the owner rewritten - we can pass a inode log format flag for the fork for the transaction that does a fork swap. This flag will then follow the inode fork through relogging actions so when the swap actually gets replayed the ownership can be changed immediately by log recovery. So that gives us a simple method of "whole fork" exchange between two inodes. This is relatively simple to implement, so it makes sense to do this as an initial implementation to support xfs_fsr on CRC enabled filesytems in the same manner as we do on existing filesystems. This commit introduces the swapext driven functionality, the recovery functionality will be in a separate patch. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 08:23:44 +08:00
/*
* Swap the data forks of the inodes
*/
swap(ip->i_df, tip->i_df);
/*
* Fix the on-disk inode values
*/
tmp = (uint64_t)ip->i_d.di_nblocks;
ip->i_d.di_nblocks = tip->i_d.di_nblocks - taforkblks + aforkblks;
tip->i_d.di_nblocks = tmp + taforkblks - aforkblks;
swap(ip->i_d.di_nextents, tip->i_d.di_nextents);
swap(ip->i_d.di_format, tip->i_d.di_format);
/*
* The extents in the source inode could still contain speculative
* preallocation beyond EOF (e.g. the file is open but not modified
* while defrag is in progress). In that case, we need to copy over the
* number of delalloc blocks the data fork in the source inode is
* tracking beyond EOF so that when the fork is truncated away when the
* temporary inode is unlinked we don't underrun the i_delayed_blks
* counter on that inode.
*/
ASSERT(tip->i_delayed_blks == 0);
tip->i_delayed_blks = ip->i_delayed_blks;
ip->i_delayed_blks = 0;
switch (ip->i_d.di_format) {
case XFS_DINODE_FMT_EXTENTS:
(*src_log_flags) |= XFS_ILOG_DEXT;
break;
case XFS_DINODE_FMT_BTREE:
xfs: swap extents operations for CRC filesystems For CRC enabled filesystems, we can't just swap inode forks from one inode to another when defragmenting a file - the blocks in the inode fork bmap btree contain pointers back to the owner inode. Hence if we are to swap the inode forks we have to atomically modify every block in the btree during the transaction. We are doing an entire fork swap here, so we could create a new transaction item type that indicates we are changing the owner of a certain structure from one value to another. If we combine this with ordered buffer logging to modify all the buffers in the tree, then we can change the buffers in the tree without needing log space for the operation. However, this then requires log recovery to perform the modification of the owner information of the objects/structures in question. This does introduce some interesting ordering details into recovery: we have to make sure that the owner change replay occurs after the change that moves the objects is made, not before. Hence we can't use a separate log item for this as we have no guarantee of strict ordering between multiple items in the log due to the relogging action of asynchronous transaction commits. Hence there is no "generic" method we can use for changing the ownership of arbitrary metadata structures. For inode forks, however, there is a simple method of communicating that the fork contents need the owner rewritten - we can pass a inode log format flag for the fork for the transaction that does a fork swap. This flag will then follow the inode fork through relogging actions so when the swap actually gets replayed the ownership can be changed immediately by log recovery. So that gives us a simple method of "whole fork" exchange between two inodes. This is relatively simple to implement, so it makes sense to do this as an initial implementation to support xfs_fsr on CRC enabled filesytems in the same manner as we do on existing filesystems. This commit introduces the swapext driven functionality, the recovery functionality will be in a separate patch. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 08:23:44 +08:00
ASSERT(ip->i_d.di_version < 3 ||
(*src_log_flags & XFS_ILOG_DOWNER));
(*src_log_flags) |= XFS_ILOG_DBROOT;
break;
}
switch (tip->i_d.di_format) {
case XFS_DINODE_FMT_EXTENTS:
(*target_log_flags) |= XFS_ILOG_DEXT;
break;
case XFS_DINODE_FMT_BTREE:
(*target_log_flags) |= XFS_ILOG_DBROOT;
xfs: swap extents operations for CRC filesystems For CRC enabled filesystems, we can't just swap inode forks from one inode to another when defragmenting a file - the blocks in the inode fork bmap btree contain pointers back to the owner inode. Hence if we are to swap the inode forks we have to atomically modify every block in the btree during the transaction. We are doing an entire fork swap here, so we could create a new transaction item type that indicates we are changing the owner of a certain structure from one value to another. If we combine this with ordered buffer logging to modify all the buffers in the tree, then we can change the buffers in the tree without needing log space for the operation. However, this then requires log recovery to perform the modification of the owner information of the objects/structures in question. This does introduce some interesting ordering details into recovery: we have to make sure that the owner change replay occurs after the change that moves the objects is made, not before. Hence we can't use a separate log item for this as we have no guarantee of strict ordering between multiple items in the log due to the relogging action of asynchronous transaction commits. Hence there is no "generic" method we can use for changing the ownership of arbitrary metadata structures. For inode forks, however, there is a simple method of communicating that the fork contents need the owner rewritten - we can pass a inode log format flag for the fork for the transaction that does a fork swap. This flag will then follow the inode fork through relogging actions so when the swap actually gets replayed the ownership can be changed immediately by log recovery. So that gives us a simple method of "whole fork" exchange between two inodes. This is relatively simple to implement, so it makes sense to do this as an initial implementation to support xfs_fsr on CRC enabled filesytems in the same manner as we do on existing filesystems. This commit introduces the swapext driven functionality, the recovery functionality will be in a separate patch. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 08:23:44 +08:00
ASSERT(tip->i_d.di_version < 3 ||
(*target_log_flags & XFS_ILOG_DOWNER));
break;
}
return 0;
}
/*
* Fix up the owners of the bmbt blocks to refer to the current inode. The
* change owner scan attempts to order all modified buffers in the current
* transaction. In the event of ordered buffer failure, the offending buffer is
* physically logged as a fallback and the scan returns -EAGAIN. We must roll
* the transaction in this case to replenish the fallback log reservation and
* restart the scan. This process repeats until the scan completes.
*/
static int
xfs_swap_change_owner(
struct xfs_trans **tpp,
struct xfs_inode *ip,
struct xfs_inode *tmpip)
{
int error;
struct xfs_trans *tp = *tpp;
do {
error = xfs_bmbt_change_owner(tp, ip, XFS_DATA_FORK, ip->i_ino,
NULL);
/* success or fatal error */
if (error != -EAGAIN)
break;
error = xfs_trans_roll(tpp);
if (error)
break;
tp = *tpp;
/*
* Redirty both inodes so they can relog and keep the log tail
* moving forward.
*/
xfs_trans_ijoin(tp, ip, 0);
xfs_trans_ijoin(tp, tmpip, 0);
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
xfs_trans_log_inode(tp, tmpip, XFS_ILOG_CORE);
} while (true);
return error;
}
int
xfs_swap_extents(
struct xfs_inode *ip, /* target inode */
struct xfs_inode *tip, /* tmp inode */
struct xfs_swapext *sxp)
{
struct xfs_mount *mp = ip->i_mount;
struct xfs_trans *tp;
struct xfs_bstat *sbp = &sxp->sx_stat;
int src_log_flags, target_log_flags;
int error = 0;
int lock_flags;
uint64_t f;
int resblks = 0;
/*
* Lock the inodes against other IO, page faults and truncate to
* begin with. Then we can ensure the inodes are flushed and have no
* page cache safely. Once we have done this we can take the ilocks and
* do the rest of the checks.
*/
lock_two_nondirectories(VFS_I(ip), VFS_I(tip));
lock_flags = XFS_MMAPLOCK_EXCL;
xfs_lock_two_inodes(ip, XFS_MMAPLOCK_EXCL, tip, XFS_MMAPLOCK_EXCL);
/* Verify that both files have the same format */
if ((VFS_I(ip)->i_mode & S_IFMT) != (VFS_I(tip)->i_mode & S_IFMT)) {
error = -EINVAL;
goto out_unlock;
}
/* Verify both files are either real-time or non-realtime */
if (XFS_IS_REALTIME_INODE(ip) != XFS_IS_REALTIME_INODE(tip)) {
error = -EINVAL;
goto out_unlock;
}
error = xfs_swap_extent_flush(ip);
if (error)
goto out_unlock;
error = xfs_swap_extent_flush(tip);
if (error)
goto out_unlock;
xfs: cancel COW blocks before swapext We need to make sure we have no outstanding COW blocks before we swap extents, as there is nothing preventing us from having preallocated COW delalloc on either inode that swapext is called on. That case can easily be reproduced by running generic/324 in always_cow mode: [ 620.760572] XFS: Assertion failed: tip->i_delayed_blks == 0, file: fs/xfs/xfs_bmap_util.c, line: 1669 [ 620.761608] ------------[ cut here ]------------ [ 620.762171] kernel BUG at fs/xfs/xfs_message.c:102! [ 620.762732] invalid opcode: 0000 [#1] SMP PTI [ 620.763272] CPU: 0 PID: 24153 Comm: xfs_fsr Tainted: G W 4.19.0-rc1+ #4182 [ 620.764203] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014 [ 620.765202] RIP: 0010:assfail+0x20/0x28 [ 620.765646] Code: 31 ff e8 83 fc ff ff 0f 0b c3 48 89 f1 41 89 d0 48 c7 c6 48 ca 8d 82 48 89 fa 38 [ 620.767758] RSP: 0018:ffffc9000898bc10 EFLAGS: 00010202 [ 620.768359] RAX: 0000000000000000 RBX: ffff88012f14ba40 RCX: 0000000000000000 [ 620.769174] RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffff828560d9 [ 620.769982] RBP: ffff88012f14b300 R08: 0000000000000000 R09: 0000000000000000 [ 620.770788] R10: 000000000000000a R11: f000000000000000 R12: ffffc9000898bc98 [ 620.771638] R13: ffffc9000898bc9c R14: ffff880130b5e2b8 R15: ffff88012a1fa2a8 [ 620.772504] FS: 00007fdc36e0fbc0(0000) GS:ffff88013ba00000(0000) knlGS:0000000000000000 [ 620.773475] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 620.774168] CR2: 00007fdc3604d000 CR3: 0000000132afc000 CR4: 00000000000006f0 [ 620.774978] Call Trace: [ 620.775274] xfs_swap_extent_forks+0x2a0/0x2e0 [ 620.775792] xfs_swap_extents+0x38b/0xab0 [ 620.776256] xfs_ioc_swapext+0x121/0x140 [ 620.776709] xfs_file_ioctl+0x328/0xc90 [ 620.777154] ? rcu_read_lock_sched_held+0x50/0x60 [ 620.777694] ? xfs_iunlock+0x233/0x260 [ 620.778127] ? xfs_setattr_nonsize+0x3be/0x6a0 [ 620.778647] do_vfs_ioctl+0x9d/0x680 [ 620.779071] ? ksys_fchown+0x47/0x80 [ 620.779552] ksys_ioctl+0x35/0x70 [ 620.780040] __x64_sys_ioctl+0x11/0x20 [ 620.780530] do_syscall_64+0x4b/0x190 [ 620.780927] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 620.781467] RIP: 0033:0x7fdc364d0f07 [ 620.781900] Code: b3 66 90 48 8b 05 81 5f 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 28 [ 620.784044] RSP: 002b:00007ffe2a766038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 620.784896] RAX: ffffffffffffffda RBX: 0000000000000025 RCX: 00007fdc364d0f07 [ 620.785667] RDX: 0000560296ca2fc0 RSI: 00000000c0c0586d RDI: 0000000000000005 [ 620.786398] RBP: 0000000000000025 R08: 0000000000001200 R09: 0000000000000000 [ 620.787283] R10: 0000000000000432 R11: 0000000000000246 R12: 0000000000000005 [ 620.788051] R13: 0000000000000000 R14: 0000000000001000 R15: 0000000000000006 [ 620.788927] Modules linked in: [ 620.789340] ---[ end trace 9503b7417ffdbdb0 ]--- [ 620.790065] RIP: 0010:assfail+0x20/0x28 [ 620.790642] Code: 31 ff e8 83 fc ff ff 0f 0b c3 48 89 f1 41 89 d0 48 c7 c6 48 ca 8d 82 48 89 fa 38 [ 620.793038] RSP: 0018:ffffc9000898bc10 EFLAGS: 00010202 [ 620.793609] RAX: 0000000000000000 RBX: ffff88012f14ba40 RCX: 0000000000000000 [ 620.794317] RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffff828560d9 [ 620.795025] RBP: ffff88012f14b300 R08: 0000000000000000 R09: 0000000000000000 [ 620.795778] R10: 000000000000000a R11: f000000000000000 R12: ffffc9000898bc98 [ 620.796675] R13: ffffc9000898bc9c R14: ffff880130b5e2b8 R15: ffff88012a1fa2a8 [ 620.797782] FS: 00007fdc36e0fbc0(0000) GS:ffff88013ba00000(0000) knlGS:0000000000000000 [ 620.798908] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 620.799594] CR2: 00007fdc3604d000 CR3: 0000000132afc000 CR4: 00000000000006f0 [ 620.800424] Kernel panic - not syncing: Fatal exception [ 620.801191] Kernel Offset: disabled [ 620.801597] ---[ end Kernel panic - not syncing: Fatal exception ]--- Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 14:21:55 +08:00
if (xfs_inode_has_cow_data(tip)) {
error = xfs_reflink_cancel_cow_range(tip, 0, NULLFILEOFF, true);
if (error)
return error;
}
/*
* Extent "swapping" with rmap requires a permanent reservation and
* a block reservation because it's really just a remap operation
* performed with log redo items!
*/
if (xfs_sb_version_hasrmapbt(&mp->m_sb)) {
xfs: account format bouncing into rmapbt swapext tx reservation The extent swap mechanism requires a unique implementation for rmapbt enabled filesystems. Because the rmapbt tracks extent owner information, extent swap must individually unmap and remap each extent between the two inodes. The rmapbt extent swap transaction block reservation currently accounts for the worst case bmapbt block and rmapbt block consumption based on the extent count of each inode. There is a corner case that exists due to the extent swap implementation that is not covered by this reservation, however. If one of the associated inodes is just over the max extent count used for extent format inodes (i.e., the inode is in btree format by a single extent), the unmap/remap cycle of the extent swap can bounce the inode between extent and btree format multiple times, almost as many times as there are extents in the inode (if the opposing inode happens to have one less, for example). Each back and forth cycle involves a block free and allocation, which isn't a problem except for that the initial transaction reservation must account for the total number of block allocations performed by the chain of deferred operations. If not, a block reservation overrun occurs and the filesystem shuts down. Update the rmapbt extent swap block reservation to check for this situation and add some block reservation slop to ensure the entire operation succeeds. We'd never likely require reservation for both inodes as fsr wouldn't defrag the file in that case, but the additional reservation is constrained by the data fork size so be cautious and check for both. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-10 06:01:58 +08:00
int w = XFS_DATA_FORK;
uint32_t ipnext = XFS_IFORK_NEXTENTS(ip, w);
uint32_t tipnext = XFS_IFORK_NEXTENTS(tip, w);
/*
* Conceptually this shouldn't affect the shape of either bmbt,
* but since we atomically move extents one by one, we reserve
* enough space to rebuild both trees.
*/
resblks = XFS_SWAP_RMAP_SPACE_RES(mp, ipnext, w);
resblks += XFS_SWAP_RMAP_SPACE_RES(mp, tipnext, w);
/*
xfs: account format bouncing into rmapbt swapext tx reservation The extent swap mechanism requires a unique implementation for rmapbt enabled filesystems. Because the rmapbt tracks extent owner information, extent swap must individually unmap and remap each extent between the two inodes. The rmapbt extent swap transaction block reservation currently accounts for the worst case bmapbt block and rmapbt block consumption based on the extent count of each inode. There is a corner case that exists due to the extent swap implementation that is not covered by this reservation, however. If one of the associated inodes is just over the max extent count used for extent format inodes (i.e., the inode is in btree format by a single extent), the unmap/remap cycle of the extent swap can bounce the inode between extent and btree format multiple times, almost as many times as there are extents in the inode (if the opposing inode happens to have one less, for example). Each back and forth cycle involves a block free and allocation, which isn't a problem except for that the initial transaction reservation must account for the total number of block allocations performed by the chain of deferred operations. If not, a block reservation overrun occurs and the filesystem shuts down. Update the rmapbt extent swap block reservation to check for this situation and add some block reservation slop to ensure the entire operation succeeds. We'd never likely require reservation for both inodes as fsr wouldn't defrag the file in that case, but the additional reservation is constrained by the data fork size so be cautious and check for both. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-10 06:01:58 +08:00
* Handle the corner case where either inode might straddle the
* btree format boundary. If so, the inode could bounce between
* btree <-> extent format on unmap -> remap cycles, freeing and
* allocating a bmapbt block each time.
*/
xfs: account format bouncing into rmapbt swapext tx reservation The extent swap mechanism requires a unique implementation for rmapbt enabled filesystems. Because the rmapbt tracks extent owner information, extent swap must individually unmap and remap each extent between the two inodes. The rmapbt extent swap transaction block reservation currently accounts for the worst case bmapbt block and rmapbt block consumption based on the extent count of each inode. There is a corner case that exists due to the extent swap implementation that is not covered by this reservation, however. If one of the associated inodes is just over the max extent count used for extent format inodes (i.e., the inode is in btree format by a single extent), the unmap/remap cycle of the extent swap can bounce the inode between extent and btree format multiple times, almost as many times as there are extents in the inode (if the opposing inode happens to have one less, for example). Each back and forth cycle involves a block free and allocation, which isn't a problem except for that the initial transaction reservation must account for the total number of block allocations performed by the chain of deferred operations. If not, a block reservation overrun occurs and the filesystem shuts down. Update the rmapbt extent swap block reservation to check for this situation and add some block reservation slop to ensure the entire operation succeeds. We'd never likely require reservation for both inodes as fsr wouldn't defrag the file in that case, but the additional reservation is constrained by the data fork size so be cautious and check for both. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-10 06:01:58 +08:00
if (ipnext == (XFS_IFORK_MAXEXT(ip, w) + 1))
resblks += XFS_IFORK_MAXEXT(ip, w);
if (tipnext == (XFS_IFORK_MAXEXT(tip, w) + 1))
resblks += XFS_IFORK_MAXEXT(tip, w);
}
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_write, resblks, 0, 0, &tp);
if (error)
goto out_unlock;
/*
* Lock and join the inodes to the tansaction so that transaction commit
* or cancel will unlock the inodes from this point onwards.
*/
xfs_lock_two_inodes(ip, XFS_ILOCK_EXCL, tip, XFS_ILOCK_EXCL);
lock_flags |= XFS_ILOCK_EXCL;
xfs_trans_ijoin(tp, ip, 0);
xfs_trans_ijoin(tp, tip, 0);
/* Verify all data are being swapped */
if (sxp->sx_offset != 0 ||
sxp->sx_length != ip->i_d.di_size ||
sxp->sx_length != tip->i_d.di_size) {
error = -EFAULT;
goto out_trans_cancel;
}
trace_xfs_swap_extent_before(ip, 0);
trace_xfs_swap_extent_before(tip, 1);
/* check inode formats now that data is flushed */
error = xfs_swap_extents_check_format(ip, tip);
if (error) {
xfs_notice(mp,
"%s: inode 0x%llx format is incompatible for exchanging.",
__func__, ip->i_ino);
goto out_trans_cancel;
}
/*
* Compare the current change & modify times with that
* passed in. If they differ, we abort this swap.
* This is the mechanism used to ensure the calling
* process that the file was not changed out from
* under it.
*/
if ((sbp->bs_ctime.tv_sec != VFS_I(ip)->i_ctime.tv_sec) ||
(sbp->bs_ctime.tv_nsec != VFS_I(ip)->i_ctime.tv_nsec) ||
(sbp->bs_mtime.tv_sec != VFS_I(ip)->i_mtime.tv_sec) ||
(sbp->bs_mtime.tv_nsec != VFS_I(ip)->i_mtime.tv_nsec)) {
error = -EBUSY;
goto out_trans_cancel;
}
/*
* Note the trickiness in setting the log flags - we set the owner log
* flag on the opposite inode (i.e. the inode we are setting the new
* owner to be) because once we swap the forks and log that, log
* recovery is going to see the fork as owned by the swapped inode,
* not the pre-swapped inodes.
*/
src_log_flags = XFS_ILOG_CORE;
target_log_flags = XFS_ILOG_CORE;
if (xfs_sb_version_hasrmapbt(&mp->m_sb))
error = xfs_swap_extent_rmap(&tp, ip, tip);
else
error = xfs_swap_extent_forks(tp, ip, tip, &src_log_flags,
&target_log_flags);
if (error)
goto out_trans_cancel;
/* Do we have to swap reflink flags? */
if ((ip->i_d.di_flags2 & XFS_DIFLAG2_REFLINK) ^
(tip->i_d.di_flags2 & XFS_DIFLAG2_REFLINK)) {
f = ip->i_d.di_flags2 & XFS_DIFLAG2_REFLINK;
ip->i_d.di_flags2 &= ~XFS_DIFLAG2_REFLINK;
ip->i_d.di_flags2 |= tip->i_d.di_flags2 & XFS_DIFLAG2_REFLINK;
tip->i_d.di_flags2 &= ~XFS_DIFLAG2_REFLINK;
tip->i_d.di_flags2 |= f & XFS_DIFLAG2_REFLINK;
}
/* Swap the cow forks. */
if (xfs_sb_version_hasreflink(&mp->m_sb)) {
ASSERT(ip->i_cformat == XFS_DINODE_FMT_EXTENTS);
ASSERT(tip->i_cformat == XFS_DINODE_FMT_EXTENTS);
swap(ip->i_cnextents, tip->i_cnextents);
swap(ip->i_cowfp, tip->i_cowfp);
if (ip->i_cowfp && ip->i_cowfp->if_bytes)
xfs_inode_set_cowblocks_tag(ip);
else
xfs_inode_clear_cowblocks_tag(ip);
if (tip->i_cowfp && tip->i_cowfp->if_bytes)
xfs_inode_set_cowblocks_tag(tip);
else
xfs_inode_clear_cowblocks_tag(tip);
}
xfs_trans_log_inode(tp, ip, src_log_flags);
xfs_trans_log_inode(tp, tip, target_log_flags);
xfs: move bmbt owner change to last step of extent swap The extent swap operation currently resets bmbt block owners before the inode forks are swapped. The bmbt buffers are marked as ordered so they do not have to be physically logged in the transaction. This use of ordered buffers is not safe as bmbt buffers may have been previously physically logged. The bmbt owner change algorithm needs to be updated to physically log buffers that are already dirty when/if they are encountered. This means that an extent swap will eventually require multiple rolling transactions to handle large btrees. In addition, all inode related changes must be logged before the bmbt owner change scan begins and can roll the transaction for the first time to preserve fs consistency via log recovery. In preparation for such fixes to the bmbt owner change algorithm, refactor the bmbt scan out of the extent fork swap code to the last operation before the transaction is committed. Update xfs_swap_extent_forks() to only set the inode log flags when an owner change scan is necessary. Update xfs_swap_extents() to trigger the owner change based on the inode log flags. Note that since the owner change now occurs after the extent fork swap, the inode btrees must be fixed up with the inode number of the current inode (similar to log recovery). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-08-30 01:08:39 +08:00
/*
* The extent forks have been swapped, but crc=1,rmapbt=0 filesystems
* have inode number owner values in the bmbt blocks that still refer to
* the old inode. Scan each bmbt to fix up the owner values with the
* inode number of the current inode.
*/
if (src_log_flags & XFS_ILOG_DOWNER) {
error = xfs_swap_change_owner(&tp, ip, tip);
xfs: move bmbt owner change to last step of extent swap The extent swap operation currently resets bmbt block owners before the inode forks are swapped. The bmbt buffers are marked as ordered so they do not have to be physically logged in the transaction. This use of ordered buffers is not safe as bmbt buffers may have been previously physically logged. The bmbt owner change algorithm needs to be updated to physically log buffers that are already dirty when/if they are encountered. This means that an extent swap will eventually require multiple rolling transactions to handle large btrees. In addition, all inode related changes must be logged before the bmbt owner change scan begins and can roll the transaction for the first time to preserve fs consistency via log recovery. In preparation for such fixes to the bmbt owner change algorithm, refactor the bmbt scan out of the extent fork swap code to the last operation before the transaction is committed. Update xfs_swap_extent_forks() to only set the inode log flags when an owner change scan is necessary. Update xfs_swap_extents() to trigger the owner change based on the inode log flags. Note that since the owner change now occurs after the extent fork swap, the inode btrees must be fixed up with the inode number of the current inode (similar to log recovery). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-08-30 01:08:39 +08:00
if (error)
goto out_trans_cancel;
}
if (target_log_flags & XFS_ILOG_DOWNER) {
error = xfs_swap_change_owner(&tp, tip, ip);
xfs: move bmbt owner change to last step of extent swap The extent swap operation currently resets bmbt block owners before the inode forks are swapped. The bmbt buffers are marked as ordered so they do not have to be physically logged in the transaction. This use of ordered buffers is not safe as bmbt buffers may have been previously physically logged. The bmbt owner change algorithm needs to be updated to physically log buffers that are already dirty when/if they are encountered. This means that an extent swap will eventually require multiple rolling transactions to handle large btrees. In addition, all inode related changes must be logged before the bmbt owner change scan begins and can roll the transaction for the first time to preserve fs consistency via log recovery. In preparation for such fixes to the bmbt owner change algorithm, refactor the bmbt scan out of the extent fork swap code to the last operation before the transaction is committed. Update xfs_swap_extent_forks() to only set the inode log flags when an owner change scan is necessary. Update xfs_swap_extents() to trigger the owner change based on the inode log flags. Note that since the owner change now occurs after the extent fork swap, the inode btrees must be fixed up with the inode number of the current inode (similar to log recovery). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-08-30 01:08:39 +08:00
if (error)
goto out_trans_cancel;
}
/*
* If this is a synchronous mount, make sure that the
* transaction goes to disk before returning to the user.
*/
if (mp->m_flags & XFS_MOUNT_WSYNC)
xfs_trans_set_sync(tp);
error = xfs_trans_commit(tp);
trace_xfs_swap_extent_after(ip, 0);
trace_xfs_swap_extent_after(tip, 1);
out_unlock:
xfs_iunlock(ip, lock_flags);
xfs_iunlock(tip, lock_flags);
unlock_two_nondirectories(VFS_I(ip), VFS_I(tip));
return error;
out_trans_cancel:
xfs_trans_cancel(tp);
goto out_unlock;
}