openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm/configs/tegra_defconfig

253 lines
5.6 KiB
Plaintext
Raw Normal View History

ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_EXPERIMENTAL=y
ARM: tegra: defconfig updates Enable: * SND_SOC_TEGRA_WM8753 (new feature) * TPS65910 (Cardhu regulator) * CONFIG_I2C_MUX (dependency of:) * CONFIG_I2C_MUX_PINCTRL (for Seaboard) Remove some deleted options: * MACH_KAEN * MACH_VENTANA * MACH_WARIO Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-22 05:02:57 +08:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_ELF_CORE is not set
arm/tegra: refresh defconfig for tegra30 Update the defconfig for tegra due to the addition of tegra30 and rename of t20/t30 options. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-12-18 12:45:27 +08:00
CONFIG_EMBEDDED=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_PERF_EVENTS=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_PARTITION_ADVANCED=y
CONFIG_EFI_PARTITION=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_TEGRA=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_GPIO_PCA953X=y
arm/tegra: refresh defconfig for tegra30 Update the defconfig for tegra due to the addition of tegra30 and rename of t20/t30 options. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-12-18 12:45:27 +08:00
CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_ARCH_TEGRA_3x_SOC=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_TEGRA_PCI=y
CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_TEGRA_EMC_SCALING_ENABLE=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_AUTO_ZRELADDR=y
ARM: tegra: defconfig updates Add: * RTC_DRV_TPS6586X to enable the RTC on many boards, such as Harmony and Ventana. * POWER_RESET_GPIO to provide a power off driver for TrimSlice. * Tegra KBC controller support, for Seaboard. * Tegra high-speed UART driver, for Cardhu Bluetooth. * kexec support. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-22 18:53:05 +08:00
CONFIG_KEXEC=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_IDLE=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_VFP=y
ARM: tegra: update defconfig New options enabled: * RUNTIME_PM * ISL29028 (light and proximity) * INPUT_MPU3050 (gyro) * BATTERY_SBS * EM3027 RTC * INPUT_MISC (dependency) * POWER_SUPPLY (dependency) The IIO option seems to have been moved recently too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-12 00:37:02 +08:00
CONFIG_PM_RUNTIME=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
ARM: tegra: update defconfig * Enable TPS6586x PMIC driver * Enable RealTek 8169 used on TrimSlice * Allow booting with root on NFS Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-03-09 22:31:19 +08:00
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_INET_ESP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_BT=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_BNEP=y
CONFIG_BT_HIDP=y
CONFIG_BT_HCIBTUSB=m
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
# CONFIG_FIRMWARE_IN_KERNEL is not set
ARM: tegra: defconfig updates New options enabled: * BRCMFMAC: wlan driver, enable as module. * MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH to enable serial flash on Cardhu and TrimSlice. * PWM/backlight features for use with tegradrm. * tegradrm; Tegra's new display driver. * CMA, so that tegradrm can allocate large buffers. * SquashFS, which is used as the root filesystem on boards based on the Tamonten processor module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 16:55:00 +08:00
CONFIG_CMA=y
CONFIG_MTD=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_M25P80=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_PROC_DEVICETREE=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_BLK_DEV_LOOP=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_ICS932S401=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_BLK_DEV_SR=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
# CONFIG_SCSI_LOWLEVEL is not set
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
ARM: tegra: update defconfig * Enable TPS6586x PMIC driver * Enable RealTek 8169 used on TrimSlice * Allow booting with root on NFS Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-03-09 22:31:19 +08:00
CONFIG_R8169=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_USB_PEGASUS=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
ARM: tegra: defconfig updates New options enabled: * BRCMFMAC: wlan driver, enable as module. * MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH to enable serial flash on Cardhu and TrimSlice. * PWM/backlight features for use with tegradrm. * tegradrm; Tegra's new display driver. * CMA, so that tegradrm can allocate large buffers. * SquashFS, which is used as the root filesystem on boards based on the Tamonten processor module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 16:55:00 +08:00
CONFIG_BRCMFMAC=m
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_RT2X00=y
CONFIG_RT2800USB=m
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_INPUT_EVDEV=y
ARM: tegra: defconfig updates Add: * RTC_DRV_TPS6586X to enable the RTC on many boards, such as Harmony and Ventana. * POWER_RESET_GPIO to provide a power off driver for TrimSlice. * Tegra KBC controller support, for Seaboard. * Tegra high-speed UART driver, for Cardhu Bluetooth. * kexec support. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-22 18:53:05 +08:00
CONFIG_KEYBOARD_TEGRA=y
ARM: tegra: update defconfig New options enabled: * RUNTIME_PM * ISL29028 (light and proximity) * INPUT_MPU3050 (gyro) * BATTERY_SBS * EM3027 RTC * INPUT_MISC (dependency) * POWER_SUPPLY (dependency) The IIO option seems to have been moved recently too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-12 00:37:02 +08:00
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MPU3050=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
# CONFIG_LEGACY_PTYS is not set
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
ARM: tegra: defconfig updates Add: * RTC_DRV_TPS6586X to enable the RTC on many boards, such as Harmony and Ventana. * POWER_RESET_GPIO to provide a power off driver for TrimSlice. * Tegra KBC controller support, for Seaboard. * Tegra high-speed UART driver, for Cardhu Bluetooth. * kexec support. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-22 18:53:05 +08:00
CONFIG_SERIAL_TEGRA=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_SERIAL_OF_PLATFORM=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
ARM: tegra: enable new drivers in defconfig Enable new platforms and tegra drivers in tegra_defconfig. Also enable some of the common devices several platforms, and GUID partition tables to make it possible to boot a tegra_defconfig kernel with a ChromiumOS filesystem. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-03-05 08:11:43 +08:00
# CONFIG_I2C_COMPAT is not set
ARM: tegra: defconfig updates Enable: * SND_SOC_TEGRA_WM8753 (new feature) * TPS65910 (Cardhu regulator) * CONFIG_I2C_MUX (dependency of:) * CONFIG_I2C_MUX_PINCTRL (for Seaboard) Remove some deleted options: * MACH_KAEN * MACH_VENTANA * MACH_WARIO Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-22 05:02:57 +08:00
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PINCTRL=y
ARM: tegra: enable new drivers in defconfig Enable new platforms and tegra drivers in tegra_defconfig. Also enable some of the common devices several platforms, and GUID partition tables to make it possible to boot a tegra_defconfig kernel with a ChromiumOS filesystem. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-03-05 08:11:43 +08:00
CONFIG_I2C_TEGRA=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_SPI=y
ARM: tegra: defconfig updates New options enabled: * BRCMFMAC: wlan driver, enable as module. * MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH to enable serial flash on Cardhu and TrimSlice. * PWM/backlight features for use with tegradrm. * tegradrm; Tegra's new display driver. * CMA, so that tegradrm can allocate large buffers. * SquashFS, which is used as the root filesystem on boards based on the Tamonten processor module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 16:55:00 +08:00
CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_SPI_TEGRA20_SLINK=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_GPIO_PCA953X_IRQ=y
ARM: tegra: defconfig: Enable tps6586x gpio Enable GPIO_TPS6586X as the gpio functionality of this device moved as platform driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-25 06:39:31 +08:00
CONFIG_GPIO_TPS6586X=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_GPIO_TPS65910=y
ARM: tegra: update defconfig New options enabled: * RUNTIME_PM * ISL29028 (light and proximity) * INPUT_MPU3050 (gyro) * BATTERY_SBS * EM3027 RTC * INPUT_MISC (dependency) * POWER_SUPPLY (dependency) The IIO option seems to have been moved recently too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-12 00:37:02 +08:00
CONFIG_POWER_SUPPLY=y
CONFIG_BATTERY_SBS=y
ARM: tegra: defconfig updates Add: * RTC_DRV_TPS6586X to enable the RTC on many boards, such as Harmony and Ventana. * POWER_RESET_GPIO to provide a power off driver for TrimSlice. * Tegra KBC controller support, for Seaboard. * Tegra high-speed UART driver, for Cardhu Bluetooth. * kexec support. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-22 18:53:05 +08:00
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
ARM: tegra: enable new drivers in defconfig Enable new platforms and tegra drivers in tegra_defconfig. Also enable some of the common devices several platforms, and GUID partition tables to make it possible to boot a tegra_defconfig kernel with a ChromiumOS filesystem. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-03-05 08:11:43 +08:00
CONFIG_SENSORS_LM90=y
ARM: tegra: update defconfig * Enable TPS6586x PMIC driver * Enable RealTek 8169 used on TrimSlice * Allow booting with root on NFS Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-03-09 22:31:19 +08:00
CONFIG_MFD_TPS6586X=y
ARM: tegra: defconfig updates Enable: * SND_SOC_TEGRA_WM8753 (new feature) * TPS65910 (Cardhu regulator) * CONFIG_I2C_MUX (dependency of:) * CONFIG_I2C_MUX_PINCTRL (for Seaboard) Remove some deleted options: * MACH_KAEN * MACH_VENTANA * MACH_WARIO Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-22 05:02:57 +08:00
CONFIG_MFD_TPS65910=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_MFD_MAX8907=y
ARM: tegra: update defconfig * Enable TPS6586x PMIC driver * Enable RealTek 8169 used on TrimSlice * Allow booting with root on NFS Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-03-09 22:31:19 +08:00
CONFIG_REGULATOR=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_GPIO=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_REGULATOR_MAX8907=y
ARM: tegra: update defconfig New options enabled: * REGULATOR_TPS62360: for Cardhu's CPU core * MEMORY: dependency for TEGRA*_MC Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> # (parts) Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> # (parts) Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-11 04:38:44 +08:00
CONFIG_REGULATOR_TPS62360=y
ARM: tegra: update defconfig * Enable TPS6586x PMIC driver * Enable RealTek 8169 used on TrimSlice * Allow booting with root on NFS Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-03-09 22:31:19 +08:00
CONFIG_REGULATOR_TPS6586X=y
ARM: tegra: defconfig updates Enable: * SND_SOC_TEGRA_WM8753 (new feature) * TPS65910 (Cardhu regulator) * CONFIG_I2C_MUX (dependency of:) * CONFIG_I2C_MUX_PINCTRL (for Seaboard) Remove some deleted options: * MACH_KAEN * MACH_VENTANA * MACH_WARIO Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-22 05:02:57 +08:00
CONFIG_REGULATOR_TPS65910=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
ARM: tegra: defconfig updates New options enabled: * BRCMFMAC: wlan driver, enable as module. * MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH to enable serial flash on Cardhu and TrimSlice. * PWM/backlight features for use with tegradrm. * tegradrm; Tegra's new display driver. * CMA, so that tegradrm can allocate large buffers. * SquashFS, which is used as the root filesystem on boards based on the Tamonten processor module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 16:55:00 +08:00
CONFIG_DRM=y
CONFIG_DRM_TEGRA=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_SOUND=y
CONFIG_SND=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_TEGRA=y
ARM: tegra: defconfig updates Enable: * SND_SOC_TEGRA_WM8753 (new feature) * TPS65910 (Cardhu regulator) * CONFIG_I2C_MUX (dependency of:) * CONFIG_I2C_MUX_PINCTRL (for Seaboard) Remove some deleted options: * MACH_KAEN * MACH_VENTANA * MACH_WARIO Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-22 05:02:57 +08:00
CONFIG_SND_SOC_TEGRA_WM8753=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_SND_SOC_TEGRA_WM8903=y
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_SND_SOC_TEGRA_ALC5632=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_TEGRA=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_USB_ACM=y
CONFIG_USB_WDM=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_USB_STORAGE=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_MMC=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_MMC_BLOCK_MINORS=16
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
ARM: tegra: enable new drivers in defconfig Enable new platforms and tegra drivers in tegra_defconfig. Also enable some of the common devices several platforms, and GUID partition tables to make it possible to boot a tegra_defconfig kernel with a ChromiumOS filesystem. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-03-05 08:11:43 +08:00
CONFIG_MMC_SDHCI_TEGRA=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_GPIO=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_RTC_CLASS=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_DRV_MAX8907=y
ARM: tegra: defconfig updates Add: * RTC_DRV_TPS6586X to enable the RTC on many boards, such as Harmony and Ventana. * POWER_RESET_GPIO to provide a power off driver for TrimSlice. * Tegra KBC controller support, for Seaboard. * Tegra high-speed UART driver, for Cardhu Bluetooth. * kexec support. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-22 18:53:05 +08:00
CONFIG_RTC_DRV_TPS6586X=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_RTC_DRV_TPS65910=y
ARM: tegra: update defconfig New options enabled: * RUNTIME_PM * ISL29028 (light and proximity) * INPUT_MPU3050 (gyro) * BATTERY_SBS * EM3027 RTC * INPUT_MISC (dependency) * POWER_SUPPLY (dependency) The IIO option seems to have been moved recently too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-12 00:37:02 +08:00
CONFIG_RTC_DRV_EM3027=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_RTC_DRV_TEGRA=y
ARM: tegra: config: enable dmaengine based APB DMA driver Enable config for dmaengine based Tegra APB DMA driver and disable the legacy APB DMA driver (SYSTEM_DMA). [swarren: removed CONFIG_TEGRA_SYSTEM_DMA not set line, since the option is removed entirely in a later patch] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 12:13:13 +08:00
CONFIG_DMADEVICES=y
CONFIG_TEGRA20_APB_DMA=y
ARM: tegra: enable new drivers in defconfig Enable new platforms and tegra drivers in tegra_defconfig. Also enable some of the common devices several platforms, and GUID partition tables to make it possible to boot a tegra_defconfig kernel with a ChromiumOS filesystem. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-03-05 08:11:43 +08:00
CONFIG_STAGING=y
CONFIG_SENSORS_ISL29018=y
ARM: tegra: update defconfig New options enabled: * RUNTIME_PM * ISL29028 (light and proximity) * INPUT_MPU3050 (gyro) * BATTERY_SBS * EM3027 RTC * INPUT_MISC (dependency) * POWER_SUPPLY (dependency) The IIO option seems to have been moved recently too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-12 00:37:02 +08:00
CONFIG_SENSORS_ISL29028=y
ARM: tegra: enable new drivers in defconfig Enable new platforms and tegra drivers in tegra_defconfig. Also enable some of the common devices several platforms, and GUID partition tables to make it possible to boot a tegra_defconfig kernel with a ChromiumOS filesystem. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-03-05 08:11:43 +08:00
CONFIG_SENSORS_AK8975=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_MFD_NVEC=y
CONFIG_KEYBOARD_NVEC=y
CONFIG_SERIO_NVEC_PS2=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_NVEC_POWER=y
CONFIG_NVEC_PAZ00=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
ARM: tegra: update defconfig New options enabled: * REGULATOR_TPS62360: for Cardhu's CPU core * MEMORY: dependency for TEGRA*_MC Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> # (parts) Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> # (parts) Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-11 04:38:44 +08:00
CONFIG_MEMORY=y
ARM: tegra: update defconfig New options enabled: * RUNTIME_PM * ISL29028 (light and proximity) * INPUT_MPU3050 (gyro) * BATTERY_SBS * EM3027 RTC * INPUT_MISC (dependency) * POWER_SUPPLY (dependency) The IIO option seems to have been moved recently too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-12 00:37:02 +08:00
CONFIG_IIO=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_PWM=y
CONFIG_PWM_TEGRA=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_EXT4_FS=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
# CONFIG_DNOTIFY is not set
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_TMPFS_POSIX_ACL=y
ARM: tegra: defconfig updates New options enabled: * BRCMFMAC: wlan driver, enable as module. * MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH to enable serial flash on Cardhu and TrimSlice. * PWM/backlight features for use with tegradrm. * tegradrm; Tegra's new display driver. * CMA, so that tegradrm can allocate large buffers. * SquashFS, which is used as the root filesystem on boards based on the Tamonten processor module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 16:55:00 +08:00
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
ARM: tegra: update defconfig * Enable TPS6586x PMIC driver * Enable RealTek 8169 used on TrimSlice * Allow booting with root on NFS Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-03-09 22:31:19 +08:00
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
CONFIG_CRYPTO_TWOFISH=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_CRYPTO_DEV_TEGRA_AES=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_CRC_CCITT=y