linux/arch/arm64/kernel/kaslr.c

208 lines
5.7 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
/*
* Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
*/
#include <linux/cache.h>
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
#include <linux/crc32.h>
#include <linux/init.h>
#include <linux/libfdt.h>
#include <linux/mm_types.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <asm/cacheflush.h>
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
#include <asm/fixmap.h>
#include <asm/kernel-pgtable.h>
#include <asm/memory.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
#include <asm/sections.h>
enum kaslr_status {
KASLR_ENABLED,
KASLR_DISABLED_CMDLINE,
KASLR_DISABLED_NO_SEED,
KASLR_DISABLED_FDT_REMAP,
};
enum kaslr_status __ro_after_init kaslr_status;
u64 __ro_after_init module_alloc_base;
u16 __initdata memstart_offset_seed;
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
static __init u64 get_kaslr_seed(void *fdt)
{
int node, len;
fdt64_t *prop;
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
u64 ret;
node = fdt_path_offset(fdt, "/chosen");
if (node < 0)
return 0;
prop = fdt_getprop_w(fdt, node, "kaslr-seed", &len);
if (!prop || len != sizeof(u64))
return 0;
ret = fdt64_to_cpu(*prop);
*prop = 0;
return ret;
}
static __init const u8 *kaslr_get_cmdline(void *fdt)
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
{
static __initconst const u8 default_cmdline[] = CONFIG_CMDLINE;
if (!IS_ENABLED(CONFIG_CMDLINE_FORCE)) {
int node;
const u8 *prop;
node = fdt_path_offset(fdt, "/chosen");
if (node < 0)
goto out;
prop = fdt_getprop(fdt, node, "bootargs", NULL);
if (!prop)
goto out;
return prop;
}
out:
return default_cmdline;
}
/*
* This routine will be executed with the kernel mapped at its default virtual
* address, and if it returns successfully, the kernel will be remapped, and
* start_kernel() will be executed from a randomized virtual offset. The
* relocation will result in all absolute references (e.g., static variables
* containing function pointers) to be reinitialized, and zero-initialized
* .bss variables will be reset to 0.
*/
u64 __init kaslr_early_init(u64 dt_phys)
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
{
void *fdt;
u64 seed, offset, mask, module_range;
const u8 *cmdline, *str;
int size;
/*
* Set a reasonable default for module_alloc_base in case
* we end up running with module randomization disabled.
*/
module_alloc_base = (u64)_etext - MODULES_VSIZE;
__flush_dcache_area(&module_alloc_base, sizeof(module_alloc_base));
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
/*
* Try to map the FDT early. If this fails, we simply bail,
* and proceed with KASLR disabled. We will make another
* attempt at mapping the FDT in setup_machine()
*/
early_fixmap_init();
fdt = fixmap_remap_fdt(dt_phys, &size, PAGE_KERNEL);
if (!fdt) {
kaslr_status = KASLR_DISABLED_FDT_REMAP;
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
return 0;
}
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
/*
* Retrieve (and wipe) the seed from the FDT
*/
seed = get_kaslr_seed(fdt);
if (!seed) {
kaslr_status = KASLR_DISABLED_NO_SEED;
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
return 0;
}
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
/*
* Check if 'nokaslr' appears on the command line, and
* return 0 if that is the case.
*/
cmdline = kaslr_get_cmdline(fdt);
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
str = strstr(cmdline, "nokaslr");
if (str == cmdline || (str > cmdline && *(str - 1) == ' ')) {
kaslr_status = KASLR_DISABLED_CMDLINE;
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
return 0;
}
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
/*
* OK, so we are proceeding with KASLR enabled. Calculate a suitable
* kernel image offset from the seed. Let's place the kernel in the
* middle half of the VMALLOC area (VA_BITS_MIN - 2), and stay clear of
arm64/kernel: kaslr: reduce module randomization range to 4 GB We currently have to rely on the GCC large code model for KASLR for two distinct but related reasons: - if we enable full randomization, modules will be loaded very far away from the core kernel, where they are out of range for ADRP instructions, - even without full randomization, the fact that the 128 MB module region is now no longer fully reserved for kernel modules means that there is a very low likelihood that the normal bottom-up allocation of other vmalloc regions may collide, and use up the range for other things. Large model code is suboptimal, given that each symbol reference involves a literal load that goes through the D-cache, reducing cache utilization. But more importantly, literals are not instructions but part of .text nonetheless, and hence mapped with executable permissions. So let's get rid of our dependency on the large model for KASLR, by: - reducing the full randomization range to 4 GB, thereby ensuring that ADRP references between modules and the kernel are always in range, - reduce the spillover range to 4 GB as well, so that we fallback to a region that is still guaranteed to be in range - move the randomization window of the core kernel to the middle of the VMALLOC space Note that KASAN always uses the module region outside of the vmalloc space, so keep the kernel close to that if KASAN is enabled. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-07 01:15:32 +08:00
* the lower and upper quarters to avoid colliding with other
* allocations.
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
* Even if we could randomize at page granularity for 16k and 64k pages,
* let's always round to 2 MB so we don't interfere with the ability to
* map using contiguous PTEs
*/
mask = ((1UL << (VA_BITS_MIN - 2)) - 1) & ~(SZ_2M - 1);
offset = BIT(VA_BITS_MIN - 3) + (seed & mask);
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
/* use the top 16 bits to randomize the linear region */
memstart_offset_seed = seed >> 48;
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
if (IS_ENABLED(CONFIG_KASAN))
/*
* KASAN does not expect the module region to intersect the
* vmalloc region, since shadow memory is allocated for each
* module at load time, whereas the vmalloc region is shadowed
* by KASAN zero pages. So keep modules out of the vmalloc
arm64/kernel: kaslr: reduce module randomization range to 4 GB We currently have to rely on the GCC large code model for KASLR for two distinct but related reasons: - if we enable full randomization, modules will be loaded very far away from the core kernel, where they are out of range for ADRP instructions, - even without full randomization, the fact that the 128 MB module region is now no longer fully reserved for kernel modules means that there is a very low likelihood that the normal bottom-up allocation of other vmalloc regions may collide, and use up the range for other things. Large model code is suboptimal, given that each symbol reference involves a literal load that goes through the D-cache, reducing cache utilization. But more importantly, literals are not instructions but part of .text nonetheless, and hence mapped with executable permissions. So let's get rid of our dependency on the large model for KASLR, by: - reducing the full randomization range to 4 GB, thereby ensuring that ADRP references between modules and the kernel are always in range, - reduce the spillover range to 4 GB as well, so that we fallback to a region that is still guaranteed to be in range - move the randomization window of the core kernel to the middle of the VMALLOC space Note that KASAN always uses the module region outside of the vmalloc space, so keep the kernel close to that if KASAN is enabled. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-07 01:15:32 +08:00
* region if KASAN is enabled, and put the kernel well within
* 4 GB of the module region.
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
*/
arm64/kernel: kaslr: reduce module randomization range to 4 GB We currently have to rely on the GCC large code model for KASLR for two distinct but related reasons: - if we enable full randomization, modules will be loaded very far away from the core kernel, where they are out of range for ADRP instructions, - even without full randomization, the fact that the 128 MB module region is now no longer fully reserved for kernel modules means that there is a very low likelihood that the normal bottom-up allocation of other vmalloc regions may collide, and use up the range for other things. Large model code is suboptimal, given that each symbol reference involves a literal load that goes through the D-cache, reducing cache utilization. But more importantly, literals are not instructions but part of .text nonetheless, and hence mapped with executable permissions. So let's get rid of our dependency on the large model for KASLR, by: - reducing the full randomization range to 4 GB, thereby ensuring that ADRP references between modules and the kernel are always in range, - reduce the spillover range to 4 GB as well, so that we fallback to a region that is still guaranteed to be in range - move the randomization window of the core kernel to the middle of the VMALLOC space Note that KASAN always uses the module region outside of the vmalloc space, so keep the kernel close to that if KASAN is enabled. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-07 01:15:32 +08:00
return offset % SZ_2G;
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
if (IS_ENABLED(CONFIG_RANDOMIZE_MODULE_REGION_FULL)) {
/*
arm64/kernel: kaslr: reduce module randomization range to 2 GB The following commit 7290d5809571 ("module: use relative references for __ksymtab entries") updated the ksymtab handling of some KASLR capable architectures so that ksymtab entries are emitted as pairs of 32-bit relative references. This reduces the size of the entries, but more importantly, it gets rid of statically assigned absolute addresses, which require fixing up at boot time if the kernel is self relocating (which takes a 24 byte RELA entry for each member of the ksymtab struct). Since ksymtab entries are always part of the same module as the symbol they export, it was assumed at the time that a 32-bit relative reference is always sufficient to capture the offset between a ksymtab entry and its target symbol. Unfortunately, this is not always true: in the case of per-CPU variables, a per-CPU variable's base address (which usually differs from the actual address of any of its per-CPU copies) is allocated in the vicinity of the ..data.percpu section in the core kernel (i.e., in the per-CPU reserved region which follows the section containing the core kernel's statically allocated per-CPU variables). Since we randomize the module space over a 4 GB window covering the core kernel (based on the -/+ 4 GB range of an ADRP/ADD pair), we may end up putting the core kernel out of the -/+ 2 GB range of 32-bit relative references of module ksymtab entries that refer to per-CPU variables. So reduce the module randomization range a bit further. We lose 1 bit of randomization this way, but this is something we can tolerate. Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-05-23 17:17:37 +08:00
* Randomize the module region over a 2 GB window covering the
arm64/kernel: kaslr: reduce module randomization range to 4 GB We currently have to rely on the GCC large code model for KASLR for two distinct but related reasons: - if we enable full randomization, modules will be loaded very far away from the core kernel, where they are out of range for ADRP instructions, - even without full randomization, the fact that the 128 MB module region is now no longer fully reserved for kernel modules means that there is a very low likelihood that the normal bottom-up allocation of other vmalloc regions may collide, and use up the range for other things. Large model code is suboptimal, given that each symbol reference involves a literal load that goes through the D-cache, reducing cache utilization. But more importantly, literals are not instructions but part of .text nonetheless, and hence mapped with executable permissions. So let's get rid of our dependency on the large model for KASLR, by: - reducing the full randomization range to 4 GB, thereby ensuring that ADRP references between modules and the kernel are always in range, - reduce the spillover range to 4 GB as well, so that we fallback to a region that is still guaranteed to be in range - move the randomization window of the core kernel to the middle of the VMALLOC space Note that KASAN always uses the module region outside of the vmalloc space, so keep the kernel close to that if KASAN is enabled. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-07 01:15:32 +08:00
* kernel. This reduces the risk of modules leaking information
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
* about the address of the kernel itself, but results in
* branches between modules and the core kernel that are
* resolved via PLTs. (Branches between modules will be
* resolved normally.)
*/
arm64/kernel: kaslr: reduce module randomization range to 2 GB The following commit 7290d5809571 ("module: use relative references for __ksymtab entries") updated the ksymtab handling of some KASLR capable architectures so that ksymtab entries are emitted as pairs of 32-bit relative references. This reduces the size of the entries, but more importantly, it gets rid of statically assigned absolute addresses, which require fixing up at boot time if the kernel is self relocating (which takes a 24 byte RELA entry for each member of the ksymtab struct). Since ksymtab entries are always part of the same module as the symbol they export, it was assumed at the time that a 32-bit relative reference is always sufficient to capture the offset between a ksymtab entry and its target symbol. Unfortunately, this is not always true: in the case of per-CPU variables, a per-CPU variable's base address (which usually differs from the actual address of any of its per-CPU copies) is allocated in the vicinity of the ..data.percpu section in the core kernel (i.e., in the per-CPU reserved region which follows the section containing the core kernel's statically allocated per-CPU variables). Since we randomize the module space over a 4 GB window covering the core kernel (based on the -/+ 4 GB range of an ADRP/ADD pair), we may end up putting the core kernel out of the -/+ 2 GB range of 32-bit relative references of module ksymtab entries that refer to per-CPU variables. So reduce the module randomization range a bit further. We lose 1 bit of randomization this way, but this is something we can tolerate. Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-05-23 17:17:37 +08:00
module_range = SZ_2G - (u64)(_end - _stext);
module_alloc_base = max((u64)_end + offset - SZ_2G,
arm64/kernel: kaslr: reduce module randomization range to 4 GB We currently have to rely on the GCC large code model for KASLR for two distinct but related reasons: - if we enable full randomization, modules will be loaded very far away from the core kernel, where they are out of range for ADRP instructions, - even without full randomization, the fact that the 128 MB module region is now no longer fully reserved for kernel modules means that there is a very low likelihood that the normal bottom-up allocation of other vmalloc regions may collide, and use up the range for other things. Large model code is suboptimal, given that each symbol reference involves a literal load that goes through the D-cache, reducing cache utilization. But more importantly, literals are not instructions but part of .text nonetheless, and hence mapped with executable permissions. So let's get rid of our dependency on the large model for KASLR, by: - reducing the full randomization range to 4 GB, thereby ensuring that ADRP references between modules and the kernel are always in range, - reduce the spillover range to 4 GB as well, so that we fallback to a region that is still guaranteed to be in range - move the randomization window of the core kernel to the middle of the VMALLOC space Note that KASAN always uses the module region outside of the vmalloc space, so keep the kernel close to that if KASAN is enabled. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-07 01:15:32 +08:00
(u64)MODULES_VADDR);
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
} else {
/*
* Randomize the module region by setting module_alloc_base to
* a PAGE_SIZE multiple in the range [_etext - MODULES_VSIZE,
* _stext) . This guarantees that the resulting region still
* covers [_stext, _etext], and that all relative branches can
* be resolved without veneers.
*/
module_range = MODULES_VSIZE - (u64)(_etext - _stext);
module_alloc_base = (u64)_etext + offset - MODULES_VSIZE;
}
/* use the lower 21 bits to randomize the base of the module region */
module_alloc_base += (module_range * (seed & ((1 << 21) - 1))) >> 21;
module_alloc_base &= PAGE_MASK;
__flush_dcache_area(&module_alloc_base, sizeof(module_alloc_base));
__flush_dcache_area(&memstart_offset_seed, sizeof(memstart_offset_seed));
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 21:12:01 +08:00
return offset;
}
static int __init kaslr_init(void)
{
switch (kaslr_status) {
case KASLR_ENABLED:
pr_info("KASLR enabled\n");
break;
case KASLR_DISABLED_CMDLINE:
pr_info("KASLR disabled on command line\n");
break;
case KASLR_DISABLED_NO_SEED:
pr_warn("KASLR disabled due to lack of seed\n");
break;
case KASLR_DISABLED_FDT_REMAP:
pr_warn("KASLR disabled due to FDT remapping failure\n");
break;
}
return 0;
}
core_initcall(kaslr_init)