linux/drivers/message/fusion/lsi/mpi_sas.h

271 lines
12 KiB
C
Raw Normal View History

/*
* Copyright (c) 2004-2006 LSI Corporation.
*
*
* Name: mpi_sas.h
* Title: MPI Serial Attached SCSI structures and definitions
* Creation Date: August 19, 2004
*
* mpi_sas.h Version: 01.05.04
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 08-19-04 01.05.01 Original release.
* 08-30-05 01.05.02 Added DeviceInfo bit for SEP.
* Added PrimFlags and Primitive field to SAS IO Unit
* Control request, and added a new operation code.
* 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal,
* and Remove Device operations to SAS IO Unit Control.
* Added DevHandle field to SAS IO Unit Control request and
* reply.
* 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO
* Unit Control request.
* --------------------------------------------------------------------------
*/
#ifndef MPI_SAS_H
#define MPI_SAS_H
/*
* Values for SASStatus.
*/
#define MPI_SASSTATUS_SUCCESS (0x00)
#define MPI_SASSTATUS_UNKNOWN_ERROR (0x01)
#define MPI_SASSTATUS_INVALID_FRAME (0x02)
#define MPI_SASSTATUS_UTC_BAD_DEST (0x03)
#define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04)
#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05)
#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06)
#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07)
#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08)
#define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09)
#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A)
#define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B)
#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C)
#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D)
#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E)
#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F)
#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10)
#define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11)
#define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12)
#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13)
#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14)
/*
* Values for the SAS DeviceInfo field used in SAS Device Status Change Event
* data and SAS IO Unit Configuration pages.
*/
#define MPI_SAS_DEVICE_INFO_SEP (0x00004000)
#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
#define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400)
#define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200)
#define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100)
#define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080)
#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040)
#define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020)
#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010)
#define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008)
#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007)
#define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000)
#define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001)
#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002)
#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003)
/*****************************************************************************
*
* S e r i a l A t t a c h e d S C S I M e s s a g e s
*
*****************************************************************************/
/****************************************************************************/
/* Serial Management Protocol Passthrough Request */
/****************************************************************************/
typedef struct _MSG_SMP_PASSTHROUGH_REQUEST
{
U8 PassthroughFlags; /* 00h */
U8 PhysicalPort; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 RequestDataLength; /* 04h */
U8 ConnectionRate; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 Reserved1; /* 0Ch */
U64 SASAddress; /* 10h */
U32 Reserved2; /* 18h */
U32 Reserved3; /* 1Ch */
SGE_SIMPLE_UNION SGL; /* 20h */
} MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST,
SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t;
/* values for PassthroughFlags field */
#define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80)
/* values for ConnectionRate field */
#define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
#define MPI_SMP_PT_REQ_CONNECT_RATE_1_5 (0x08)
#define MPI_SMP_PT_REQ_CONNECT_RATE_3_0 (0x09)
/* Serial Management Protocol Passthrough Reply */
typedef struct _MSG_SMP_PASSTHROUGH_REPLY
{
U8 PassthroughFlags; /* 00h */
U8 PhysicalPort; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 ResponseDataLength; /* 04h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 Reserved2; /* 0Ch */
U8 SASStatus; /* 0Dh */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 Reserved3; /* 14h */
U8 ResponseData[4]; /* 18h */
} MSG_SMP_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REPLY,
SmpPassthroughReply_t, MPI_POINTER pSmpPassthroughReply_t;
#define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80)
/****************************************************************************/
/* SATA Passthrough Request */
/****************************************************************************/
typedef struct _MSG_SATA_PASSTHROUGH_REQUEST
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 PassthroughFlags; /* 04h */
U8 ConnectionRate; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 Reserved1; /* 0Ch */
U32 Reserved2; /* 10h */
U32 Reserved3; /* 14h */
U32 DataLength; /* 18h */
U8 CommandFIS[20]; /* 1Ch */
SGE_SIMPLE_UNION SGL; /* 30h */
} MSG_SATA_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REQUEST,
SataPassthroughRequest_t, MPI_POINTER pSataPassthroughRequest_t;
/* values for PassthroughFlags field */
#define MPI_SATA_PT_REQ_PT_FLAGS_RESET_DEVICE (0x0200)
#define MPI_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100)
#define MPI_SATA_PT_REQ_PT_FLAGS_DMA_QUEUED (0x0080)
#define MPI_SATA_PT_REQ_PT_FLAGS_PACKET_COMMAND (0x0040)
#define MPI_SATA_PT_REQ_PT_FLAGS_DMA (0x0020)
#define MPI_SATA_PT_REQ_PT_FLAGS_PIO (0x0010)
#define MPI_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
#define MPI_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002)
#define MPI_SATA_PT_REQ_PT_FLAGS_READ (0x0001)
/* values for ConnectionRate field */
#define MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
#define MPI_SATA_PT_REQ_CONNECT_RATE_1_5 (0x08)
#define MPI_SATA_PT_REQ_CONNECT_RATE_3_0 (0x09)
/* SATA Passthrough Reply */
typedef struct _MSG_SATA_PASSTHROUGH_REPLY
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 PassthroughFlags; /* 04h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 Reserved2; /* 0Ch */
U8 SASStatus; /* 0Dh */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U8 StatusFIS[20]; /* 14h */
U32 StatusControlRegisters; /* 28h */
U32 TransferCount; /* 2Ch */
} MSG_SATA_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REPLY,
SataPassthroughReply_t, MPI_POINTER pSataPassthroughReply_t;
/****************************************************************************/
/* SAS IO Unit Control Request */
/****************************************************************************/
typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
{
U8 Operation; /* 00h */
U8 Reserved1; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 DevHandle; /* 04h */
U8 Reserved3; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 TargetID; /* 0Ch */
U8 Bus; /* 0Dh */
U8 PhyNum; /* 0Eh */
U8 PrimFlags; /* 0Fh */
U32 Primitive; /* 10h */
U64 SASAddress; /* 14h */
U32 Reserved4; /* 1Ch */
} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
/* values for the Operation field */
#define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01)
#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02)
#define MPI_SAS_OP_PHY_LINK_RESET (0x06)
#define MPI_SAS_OP_PHY_HARD_RESET (0x07)
#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
#define MPI_SAS_OP_MAP_CURRENT (0x09)
#define MPI_SAS_OP_SEND_PRIMITIVE (0x0A)
#define MPI_SAS_OP_FORCE_FULL_DISCOVERY (0x0B)
#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D) /* obsolete name */
#define MPI_SAS_OP_REMOVE_DEVICE (0x0D)
/* values for the PrimFlags field */
#define MPI_SAS_PRIMFLAGS_SINGLE (0x08)
#define MPI_SAS_PRIMFLAGS_TRIPLE (0x02)
#define MPI_SAS_PRIMFLAGS_REDUNDANT (0x01)
/* SAS IO Unit Control Reply */
typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY
{
U8 Operation; /* 00h */
U8 Reserved1; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 DevHandle; /* 04h */
U8 Reserved3; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved4; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
} MSG_SAS_IOUNIT_CONTROL_REPLY, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REPLY,
SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t;
#endif