openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/input/rmi4/Kconfig

98 lines
2.5 KiB
Plaintext
Raw Normal View History

Input: synaptics-rmi4 - add support for Synaptics RMI4 devices Synaptics uses the Register Mapped Interface (RMI) protocol as a communications interface for their devices. This driver adds the core functionality needed to interface with RMI4 devices. RMI devices can be connected to the host via several transport protocols and can supports a wide variety of functionality defined by RMI functions. Support for transport protocols and RMI functions are implemented in individual drivers. The RMI4 core driver uses a bus architecture to facilitate the various combinations of transport and function drivers needed by a particular device. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-11 07:35:49 +08:00
#
# RMI4 configuration
#
config RMI4_CORE
tristate "Synaptics RMI4 bus support"
help
Say Y here if you want to support the Synaptics RMI4 bus. This is
required for all RMI4 device support.
If unsure, say Y.
Input: synaptics-rmi4 - add I2C transport driver Add the transport driver for devices using RMI4 over I2C. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-11 07:44:27 +08:00
config RMI4_I2C
tristate "RMI4 I2C Support"
depends on RMI4_CORE && I2C
help
Say Y here if you want to support RMI4 devices connected to an I2C
bus.
If unsure, say Y.
Input: synaptics-rmi4 - add support for 2D sensors and F11 RMI4 currently defines two functions for reporting data for 2D sensors (F11 and F12). This patch adds the common functionality which is shared by devices with 2D reporting along with implementing functionality for F11. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-11 07:47:28 +08:00
Input: synaptics-rmi4 - add SPI transport driver Add the transport driver for devices using RMI4 over SPI. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-11 07:58:12 +08:00
config RMI4_SPI
tristate "RMI4 SPI Support"
depends on RMI4_CORE && SPI
help
Say Y here if you want to support RMI4 devices connected to a SPI
bus.
If unsure, say N.
Input: synaptics-rmi4 - add SMBus support Code obtained from https://raw.githubusercontent.com/mightybigcar/synaptics-rmi4/jf/drivers/input/rmi4/rmi_smbus.c and updated to match upstream. And fixed to make it work. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-09 09:05:58 +08:00
config RMI4_SMB
tristate "RMI4 SMB Support"
depends on RMI4_CORE && I2C
help
Say Y here if you want to support RMI4 devices connected to an SMB
bus.
If unsure, say N.
To compile this driver as a module, choose M here: the module will be
called rmi_smbus.
Input: synaptics-rmi4 - add support for 2D sensors and F11 RMI4 currently defines two functions for reporting data for 2D sensors (F11 and F12). This patch adds the common functionality which is shared by devices with 2D reporting along with implementing functionality for F11. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-11 07:47:28 +08:00
config RMI4_2D_SENSOR
bool
depends on RMI4_CORE
config RMI4_F11
bool "RMI4 Function 11 (2D pointing)"
select RMI4_2D_SENSOR
depends on RMI4_CORE
help
Say Y here if you want to add support for RMI4 function 11.
Function 11 provides 2D multifinger pointing for touchscreens and
touchpads. For sensors that support relative pointing, F11 also
provides mouse input.
Input: synaptics-rmi4 - add support for F12 Function 12 implements 2D touch position sensor for newer Synaptics touch devices. It replaces F11 and no device will contain both functions. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-11 07:55:29 +08:00
config RMI4_F12
bool "RMI4 Function 12 (2D pointing)"
select RMI4_2D_SENSOR
depends on RMI4_CORE
help
Say Y here if you want to add support for RMI4 function 12.
Function 12 provides 2D multifinger pointing for touchscreens and
touchpads. For sensors that support relative pointing, F12 also
provides mouse input.
Input: synaptics-rmi4 - add support for F30 RMI4 F30 supports input from clickpad buttons and controls LEDs located on the touchpad PCB. This patch adds support of the clickpad buttons and defers supporting LEDs for the future. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-11 07:56:58 +08:00
config RMI4_F30
bool "RMI4 Function 30 (GPIO LED)"
depends on RMI4_CORE
help
Say Y here if you want to add support for RMI4 function 30.
Function 30 provides GPIO and LED support for RMI4 devices. This
includes support for buttons on TouchPads and ClickPads.
[media] Input: synaptics-rmi4 - add support for F54 diagnostics Function 54 implements access to various RMI4 diagnostic features. This patch adds support for retrieving this data. It registers a V4L2 device to output the data to user space. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-19 05:10:37 +08:00
Input: synaptics-rmi4 - add support for F34 device reflash Add support for updating firmware, triggered by a sysfs attribute. This patch has been tested on Synaptics S7300. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-23 09:44:12 +08:00
config RMI4_F34
bool "RMI4 Function 34 (Device reflash)"
depends on RMI4_CORE
select FW_LOADER
help
Say Y here if you want to add support for RMI4 function 34.
Function 34 provides support for upgrading the firmware on the RMI4
device via the firmware loader interface. This is triggered using a
sysfs attribute.
[media] Input: synaptics-rmi4 - add support for F54 diagnostics Function 54 implements access to various RMI4 diagnostic features. This patch adds support for retrieving this data. It registers a V4L2 device to output the data to user space. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-19 05:10:37 +08:00
config RMI4_F54
bool "RMI4 Function 54 (Analog diagnostics)"
depends on RMI4_CORE
[media] Input: synaptics-rmi4: disallow impossible configuration The newly added debug mode for the synaptics-rmi4 driver relies on the v4l2 interface and vb2_vmalloc, but those might be configured as loadable modules when the driver itself is built-in, resulting in a link failure: drivers/input/rmi4/rmi_core.o: In function `rmi_f54_remove': rmi_f54.c:(.text.rmi_f54_remove+0x14): undefined reference to `video_unregister_device' rmi_f54.c:(.text.rmi_f54_remove+0x20): undefined reference to `v4l2_device_unregister' drivers/input/rmi4/rmi_core.o: In function `rmi_f54_vidioc_s_input': rmi_f54.c:(.text.rmi_f54_vidioc_s_input+0x10): undefined reference to `video_devdata' drivers/input/rmi4/rmi_core.o: In function `rmi_f54_vidioc_g_input': rmi_f54.c:(.text.rmi_f54_vidioc_g_input+0x10): undefined reference to `video_devdata' drivers/input/rmi4/rmi_core.o: In function `rmi_f54_vidioc_fmt': rmi_f54.c:(.text.rmi_f54_vidioc_fmt+0x10): undefined reference to `video_devdata' drivers/input/rmi4/rmi_core.o: In function `rmi_f54_vidioc_enum_input': rmi_f54.c:(.text.rmi_f54_vidioc_enum_input+0x10): undefined reference to `video_devdata' drivers/input/rmi4/rmi_core.o: In function `rmi_f54_vidioc_querycap': ... The best workaround I could come up with is to disallow the debug mode unless it's actually possible to call it. Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-12 23:30:33 +08:00
depends on VIDEO_V4L2=y || (RMI4_CORE=m && VIDEO_V4L2=m)
[media] Input: synaptics-rmi4 - add support for F54 diagnostics Function 54 implements access to various RMI4 diagnostic features. This patch adds support for retrieving this data. It registers a V4L2 device to output the data to user space. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-19 05:10:37 +08:00
select VIDEOBUF2_VMALLOC
help
Say Y here if you want to add support for RMI4 function 54
Function 54 provides access to various diagnostic features in certain
RMI4 touch sensors.