linux/drivers/w1/w1_int.c

246 lines
5.7 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 14:55:06 +08:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*/
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/delay.h>
#include <linux/kthread.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/sched/signal.h>
#include <linux/export.h>
#include <linux/moduleparam.h>
#include "w1_internal.h"
#include "w1_netlink.h"
static int w1_search_count = -1; /* Default is continual scan */
module_param_named(search_count, w1_search_count, int, 0);
W1: feature, enable hardware strong pullup Add a strong pullup option to the w1 system. This supplies extra power for parasite powered devices. There is a w1_master_pullup sysfs entry and enable_pullup module parameter to enable or disable the strong pullup. The one wire bus requires at a minimum one wire and ground. The common wire is used for sending and receiving data as well as supplying power to devices that are parasite powered of which temperature sensors can be one example. The bus must be idle and left high while a temperature conversion is in progress, in addition the normal pullup resister on larger networks or even higher temperatures might not supply enough power. The pullup resister can't provide too much pullup current, because devices need to pull the bus down to write a value. This enables the strong pullup for supported hardware, which can supply more current when requested. Unsupported hardware will just delay with the bus high. The hardware USB 2490 one wire bus master has a bit on some commands which will enable the strong pullup as soon as the command finishes executing. To use strong pullup, call the new w1_next_pullup function to register the duration. The next write command will call set_pullup before sending the data, and reset the duration to zero once it returns. Switched from simple_strtol to strict_strtol. Signed-off-by: David Fries <david@fries.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 13:04:42 +08:00
static int w1_enable_pullup = 1;
module_param_named(enable_pullup, w1_enable_pullup, int, 0);
static struct w1_master *w1_alloc_dev(u32 id, int slave_count, int slave_ttl,
struct device_driver *driver,
struct device *device)
{
struct w1_master *dev;
int err;
/*
* We are in process context(kernel thread), so can sleep.
*/
2007-07-19 16:49:03 +08:00
dev = kzalloc(sizeof(struct w1_master) + sizeof(struct w1_bus_master), GFP_KERNEL);
if (!dev) {
pr_err("Failed to allocate %zd bytes for new w1 device.\n",
sizeof(struct w1_master));
return NULL;
}
dev->bus_master = (struct w1_bus_master *)(dev + 1);
dev->owner = THIS_MODULE;
dev->max_slave_count = slave_count;
dev->slave_count = 0;
dev->attempts = 0;
dev->initialized = 0;
dev->id = id;
dev->slave_ttl = slave_ttl;
dev->search_count = w1_search_count;
W1: feature, enable hardware strong pullup Add a strong pullup option to the w1 system. This supplies extra power for parasite powered devices. There is a w1_master_pullup sysfs entry and enable_pullup module parameter to enable or disable the strong pullup. The one wire bus requires at a minimum one wire and ground. The common wire is used for sending and receiving data as well as supplying power to devices that are parasite powered of which temperature sensors can be one example. The bus must be idle and left high while a temperature conversion is in progress, in addition the normal pullup resister on larger networks or even higher temperatures might not supply enough power. The pullup resister can't provide too much pullup current, because devices need to pull the bus down to write a value. This enables the strong pullup for supported hardware, which can supply more current when requested. Unsupported hardware will just delay with the bus high. The hardware USB 2490 one wire bus master has a bit on some commands which will enable the strong pullup as soon as the command finishes executing. To use strong pullup, call the new w1_next_pullup function to register the duration. The next write command will call set_pullup before sending the data, and reset the duration to zero once it returns. Switched from simple_strtol to strict_strtol. Signed-off-by: David Fries <david@fries.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 13:04:42 +08:00
dev->enable_pullup = w1_enable_pullup;
/* 1 for w1_process to decrement
* 1 for __w1_remove_master_device to decrement
*/
atomic_set(&dev->refcnt, 2);
INIT_LIST_HEAD(&dev->slist);
INIT_LIST_HEAD(&dev->async_list);
mutex_init(&dev->mutex);
W1: split master mutex to avoid deadlocks. The 'mutex' in struct w1_master is use for two very different purposes. Firstly it protects various data structures such as the list of all slaves. Secondly it protects the w1 buss against concurrent accesses. This can lead to deadlocks when the ->probe code called while adding a slave needs to talk on the bus, as is the case for power_supply devices. ds2780 and ds2781 drivers contain a work around to track which process hold the lock simply to avoid this deadlock. bq27000 doesn't have that work around and so deadlocks. There are other possible deadlocks involving sysfs. When removing a device the sysfs s_active lock is held, so the lock that protects the slave list must take precedence over s_active. However when access power_supply attributes via sysfs, the s_active lock must take precedence over the lock that protects accesses to the bus. So to avoid deadlocks between w1 slaves and sysfs, these must be two separate locks. Making them separate means that the work around in ds2780 and ds2781 can be removed. So this patch: - adds a new mutex: "bus_mutex" which serialises access to the bus. - takes in mutex in w1_search and ds1wm_search while they access the bus for searching. The mutex is dropped before calling the callback which adds the slave. - changes all slaves to use bus_mutex instead of mutex to protect access to the bus - removes w1_ds2790_io_nolock and w1_ds2781_io_nolock, and the related code from drivers/power/ds278[01]_battery.c which calls them. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-18 13:59:52 +08:00
mutex_init(&dev->bus_mutex);
mutex_init(&dev->list_mutex);
memcpy(&dev->dev, device, sizeof(struct device));
dev_set_name(&dev->dev, "w1_bus_master%u", dev->id);
snprintf(dev->name, sizeof(dev->name), "w1_bus_master%u", dev->id);
drivers/w1/w1_int.c: multiple masters used same init_name When using multiple masters, w1_int.c would use the .init_name from w1.c for all entities, which will fail when creating a corresponding sysfs entry. This patch uses the unique name previously generated. WARNING: at fs/sysfs/dir.c:451 sysfs_add_one+0x48/0x64() sysfs: cannot create duplicate filename '/devices/w1 bus master' Modules linked in: Call trace: [<9001a604>] warn_slowpath_common+0x34/0x44 [<9001a64c>] warn_slowpath_fmt+0x14/0x18 [<90078020>] sysfs_add_one+0x48/0x64 [<900784ec>] create_dir+0x40/0x68 [<9007857a>] sysfs_create_dir+0x66/0x78 [<900c1a8a>] kobject_add_internal+0x6e/0x104 [<900c1bc0>] kobject_add_varg+0x20/0x2c [<900c1c1c>] kobject_add+0x30/0x3c [<900dbd66>] device_add+0x6a/0x378 [<900dbb4a>] device_initialize+0x12/0x48 [<900dc080>] device_register+0xc/0x10 [<900f99be>] w1_add_master_device+0x162/0x274 [<90008e7a>] w1_gpio_probe+0x66/0xb4 [<9000030c>] kernel_init+0x0/0xe8 [<900dde54>] platform_drv_probe+0xc/0xe [<9000030c>] kernel_init+0x0/0xe8 [<900dd4f8>] driver_probe_device+0x6c/0xdc [<900dd5fc>] __driver_attach+0x34/0x48 [<900dcce8>] bus_for_each_dev+0x2c/0x48 [<900dd5c8>] __driver_attach+0x0/0x48 [<900dd38c>] driver_attach+0x10/0x14 [<900dd16a>] bus_add_driver+0x6a/0x18c [<900dd768>] driver_register+0x60/0xb8 [<90011594>] __initcall_w1_therm_init6+0x0/0x4 [<90008e00>] w1_gpio_init+0x0/0x14 [<9000030c>] kernel_init+0x0/0xe8 [<900ddf48>] platform_driver_register+0x30/0x38 [<90011594>] __initcall_w1_therm_init6+0x0/0x4 [<90008e00>] w1_gpio_init+0x0/0x14 [<9000030c>] kernel_init+0x0/0xe8 [<900ddf5e>] platform_driver_probe+0xe/0x3c [<90008e0c>] w1_gpio_init+0xc/0x14 [<90011594>] __initcall_w1_therm_init6+0x0/0x4 [<90008e00>] w1_gpio_init+0x0/0x14 [<900126d4>] do_one_initcall+0x34/0x130 [<90000372>] kernel_init+0x66/0xe8 [<90011594>] __initcall_w1_therm_init6+0x0/0x4 [<9001ca3e>] do_exit+0x0/0x3a6 [<9000030c>] kernel_init+0x0/0xe8 [<9001ca3e>] do_exit+0x0/0x3a6 ---[ end trace 5a9233884fead918 ]--- kobject_add_internal failed for w1 bus master with -EEXIST, don't try to register things with the same name in the same directory. Signed-off-by: Florian Faber <faber@faberman.de> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-03 04:39:59 +08:00
dev->dev.init_name = dev->name;
dev->driver = driver;
dev->seq = 1;
err = device_register(&dev->dev);
if (err) {
pr_err("Failed to register master device. err=%d\n", err);
put_device(&dev->dev);
dev = NULL;
}
return dev;
}
static void w1_free_dev(struct w1_master *dev)
{
device_unregister(&dev->dev);
}
/**
* w1_add_master_device() - registers a new master device
* @master: master bus device to register
*/
int w1_add_master_device(struct w1_bus_master *master)
{
struct w1_master *dev, *entry;
int retval = 0;
struct w1_netlink_msg msg;
int id, found;
/* validate minimum functionality */
if (!(master->touch_bit && master->reset_bus) &&
!(master->write_bit && master->read_bit) &&
!(master->write_byte && master->read_byte && master->reset_bus)) {
pr_err("w1_add_master_device: invalid function set\n");
return(-EINVAL);
}
/* Lock until the device is added (or not) to w1_masters. */
mutex_lock(&w1_mlock);
/* Search for the first available id (starting at 1). */
id = 0;
do {
++id;
found = 0;
list_for_each_entry(entry, &w1_masters, w1_master_entry) {
if (entry->id == id) {
found = 1;
break;
}
}
} while (found);
dev = w1_alloc_dev(id, w1_max_slave_count, w1_max_slave_ttl,
&w1_master_driver, &w1_master_device);
if (!dev) {
mutex_unlock(&w1_mlock);
return -ENOMEM;
}
retval = w1_create_master_attributes(dev);
if (retval) {
mutex_unlock(&w1_mlock);
goto err_out_free_dev;
}
memcpy(dev->bus_master, master, sizeof(struct w1_bus_master));
dev->initialized = 1;
dev->thread = kthread_run(&w1_process, dev, "%s", dev->name);
if (IS_ERR(dev->thread)) {
retval = PTR_ERR(dev->thread);
dev_err(&dev->dev,
"Failed to create new kernel thread. err=%d\n",
retval);
mutex_unlock(&w1_mlock);
goto err_out_rm_attr;
}
list_add(&dev->w1_master_entry, &w1_masters);
mutex_unlock(&w1_mlock);
memset(&msg, 0, sizeof(msg));
msg.id.mst.id = dev->id;
msg.type = W1_MASTER_ADD;
w1_netlink_send(dev, &msg);
return 0;
#if 0 /* Thread cleanup code, not required currently. */
err_out_kill_thread:
set_bit(W1_ABORT_SEARCH, &dev->flags);
kthread_stop(dev->thread);
#endif
err_out_rm_attr:
w1_destroy_master_attributes(dev);
err_out_free_dev:
w1_free_dev(dev);
return retval;
}
EXPORT_SYMBOL(w1_add_master_device);
void __w1_remove_master_device(struct w1_master *dev)
{
struct w1_netlink_msg msg;
struct w1_slave *sl, *sln;
mutex_lock(&w1_mlock);
list_del(&dev->w1_master_entry);
mutex_unlock(&w1_mlock);
set_bit(W1_ABORT_SEARCH, &dev->flags);
kthread_stop(dev->thread);
mutex_lock(&dev->mutex);
mutex_lock(&dev->list_mutex);
list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) {
mutex_unlock(&dev->list_mutex);
w1_slave_detach(sl);
mutex_lock(&dev->list_mutex);
}
w1_destroy_master_attributes(dev);
mutex_unlock(&dev->list_mutex);
mutex_unlock(&dev->mutex);
atomic_dec(&dev->refcnt);
while (atomic_read(&dev->refcnt)) {
dev_info(&dev->dev, "Waiting for %s to become free: refcnt=%d.\n",
dev->name, atomic_read(&dev->refcnt));
if (msleep_interruptible(1000))
flush_signals(current);
mutex_lock(&dev->list_mutex);
w1_process_callbacks(dev);
mutex_unlock(&dev->list_mutex);
}
mutex_lock(&dev->list_mutex);
w1_process_callbacks(dev);
mutex_unlock(&dev->list_mutex);
memset(&msg, 0, sizeof(msg));
msg.id.mst.id = dev->id;
msg.type = W1_MASTER_REMOVE;
w1_netlink_send(dev, &msg);
w1_free_dev(dev);
}
/**
* w1_remove_master_device() - unregister a master device
* @bm: master bus device to remove
*/
void w1_remove_master_device(struct w1_bus_master *bm)
{
struct w1_master *dev, *found = NULL;
list_for_each_entry(dev, &w1_masters, w1_master_entry) {
if (!dev->initialized)
continue;
if (dev->bus_master->data == bm->data) {
found = dev;
break;
}
}
if (!found) {
pr_err("Device doesn't exist.\n");
return;
}
__w1_remove_master_device(found);
}
EXPORT_SYMBOL(w1_remove_master_device);