linux/arch/arm/mach-at91/Kconfig.non_dt

339 lines
8.4 KiB
Plaintext
Raw Normal View History

menu "Atmel Non-DT world"
config HAVE_AT91_DATAFLASH_CARD
bool
choice
prompt "Atmel AT91 Processor Devices for non DT boards"
depends on !ARCH_AT91X40
config ARCH_AT91_NONE
bool "None"
config ARCH_AT91RM9200
bool "AT91RM9200"
select SOC_AT91RM9200
ARM: at91: add Kconfig options for common clk support This patch adds the following Kconfig options to prepare the transition to common clk framework: - AT91_USE_OLD_CLK: this option is selected by every SoC which does not support new at91 clks based on common clk framework (SoC which does not define the clock tree in its device tree). This options is also selected when the user choose non dt boards support (new at91 clks can only be registered from a device tree definition). - COMMON_CLK_AT91: this option cannot be selected directly. Instead it is enabled if these 3 conditions are met: * at least one of the selected SoCs have a PMC (Power Management Controller) Unit * device tree support is enabled * the old at91 clk implementation is disabled (every selected SoC define its clks in its device tree and non dt boards support is disabled) - OLD_CLK_AT91: this option cannot be selected directly. Instead it is enabled if these 2 conditions are met: * at least one of the selected SoCs have a PMC (Power Management Controller) Unit * at least one of the selected SoCs does not define its clks in its device tree or non dt-boards support is enabled This patch selects AT91_USE_OLD_CLK in all currently supported SoCs. These selects will be removed after clk definitions are properly added in each soc's device tree. It also selects AT91_USE_OLD_CLK in all non-dt boards support. AT91_PMC_UNIT references are replaced by OLD_CLK_AT91, because PMC Unit is enabled for both old and common clk implementations, and old clk implementation should not be compiled if COMMON_CLK is enabled. To avoid future link errors, a new stub is created for at91_dt_clock_init function if OLD_CLK_AT91 is disabled. A new check is added in dt init functions (setup.c) to prepare for SoCs supporting new clk implementation. These SoCs won't setup the register_clocks callback (clk registration is done using of_clk_init). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 15:37:46 +08:00
select AT91_USE_OLD_CLK
config ARCH_AT91SAM9260
bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
select SOC_AT91SAM9260
ARM: at91: add Kconfig options for common clk support This patch adds the following Kconfig options to prepare the transition to common clk framework: - AT91_USE_OLD_CLK: this option is selected by every SoC which does not support new at91 clks based on common clk framework (SoC which does not define the clock tree in its device tree). This options is also selected when the user choose non dt boards support (new at91 clks can only be registered from a device tree definition). - COMMON_CLK_AT91: this option cannot be selected directly. Instead it is enabled if these 3 conditions are met: * at least one of the selected SoCs have a PMC (Power Management Controller) Unit * device tree support is enabled * the old at91 clk implementation is disabled (every selected SoC define its clks in its device tree and non dt boards support is disabled) - OLD_CLK_AT91: this option cannot be selected directly. Instead it is enabled if these 2 conditions are met: * at least one of the selected SoCs have a PMC (Power Management Controller) Unit * at least one of the selected SoCs does not define its clks in its device tree or non dt-boards support is enabled This patch selects AT91_USE_OLD_CLK in all currently supported SoCs. These selects will be removed after clk definitions are properly added in each soc's device tree. It also selects AT91_USE_OLD_CLK in all non-dt boards support. AT91_PMC_UNIT references are replaced by OLD_CLK_AT91, because PMC Unit is enabled for both old and common clk implementations, and old clk implementation should not be compiled if COMMON_CLK is enabled. To avoid future link errors, a new stub is created for at91_dt_clock_init function if OLD_CLK_AT91 is disabled. A new check is added in dt init functions (setup.c) to prepare for SoCs supporting new clk implementation. These SoCs won't setup the register_clocks callback (clk registration is done using of_clk_init). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 15:37:46 +08:00
select AT91_USE_OLD_CLK
config ARCH_AT91SAM9261
bool "AT91SAM9261 or AT91SAM9G10"
select SOC_AT91SAM9261
ARM: at91: add Kconfig options for common clk support This patch adds the following Kconfig options to prepare the transition to common clk framework: - AT91_USE_OLD_CLK: this option is selected by every SoC which does not support new at91 clks based on common clk framework (SoC which does not define the clock tree in its device tree). This options is also selected when the user choose non dt boards support (new at91 clks can only be registered from a device tree definition). - COMMON_CLK_AT91: this option cannot be selected directly. Instead it is enabled if these 3 conditions are met: * at least one of the selected SoCs have a PMC (Power Management Controller) Unit * device tree support is enabled * the old at91 clk implementation is disabled (every selected SoC define its clks in its device tree and non dt boards support is disabled) - OLD_CLK_AT91: this option cannot be selected directly. Instead it is enabled if these 2 conditions are met: * at least one of the selected SoCs have a PMC (Power Management Controller) Unit * at least one of the selected SoCs does not define its clks in its device tree or non dt-boards support is enabled This patch selects AT91_USE_OLD_CLK in all currently supported SoCs. These selects will be removed after clk definitions are properly added in each soc's device tree. It also selects AT91_USE_OLD_CLK in all non-dt boards support. AT91_PMC_UNIT references are replaced by OLD_CLK_AT91, because PMC Unit is enabled for both old and common clk implementations, and old clk implementation should not be compiled if COMMON_CLK is enabled. To avoid future link errors, a new stub is created for at91_dt_clock_init function if OLD_CLK_AT91 is disabled. A new check is added in dt init functions (setup.c) to prepare for SoCs supporting new clk implementation. These SoCs won't setup the register_clocks callback (clk registration is done using of_clk_init). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 15:37:46 +08:00
select AT91_USE_OLD_CLK
config ARCH_AT91SAM9263
bool "AT91SAM9263"
select SOC_AT91SAM9263
ARM: at91: add Kconfig options for common clk support This patch adds the following Kconfig options to prepare the transition to common clk framework: - AT91_USE_OLD_CLK: this option is selected by every SoC which does not support new at91 clks based on common clk framework (SoC which does not define the clock tree in its device tree). This options is also selected when the user choose non dt boards support (new at91 clks can only be registered from a device tree definition). - COMMON_CLK_AT91: this option cannot be selected directly. Instead it is enabled if these 3 conditions are met: * at least one of the selected SoCs have a PMC (Power Management Controller) Unit * device tree support is enabled * the old at91 clk implementation is disabled (every selected SoC define its clks in its device tree and non dt boards support is disabled) - OLD_CLK_AT91: this option cannot be selected directly. Instead it is enabled if these 2 conditions are met: * at least one of the selected SoCs have a PMC (Power Management Controller) Unit * at least one of the selected SoCs does not define its clks in its device tree or non dt-boards support is enabled This patch selects AT91_USE_OLD_CLK in all currently supported SoCs. These selects will be removed after clk definitions are properly added in each soc's device tree. It also selects AT91_USE_OLD_CLK in all non-dt boards support. AT91_PMC_UNIT references are replaced by OLD_CLK_AT91, because PMC Unit is enabled for both old and common clk implementations, and old clk implementation should not be compiled if COMMON_CLK is enabled. To avoid future link errors, a new stub is created for at91_dt_clock_init function if OLD_CLK_AT91 is disabled. A new check is added in dt init functions (setup.c) to prepare for SoCs supporting new clk implementation. These SoCs won't setup the register_clocks callback (clk registration is done using of_clk_init). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 15:37:46 +08:00
select AT91_USE_OLD_CLK
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
select SOC_AT91SAM9RL
ARM: at91: add Kconfig options for common clk support This patch adds the following Kconfig options to prepare the transition to common clk framework: - AT91_USE_OLD_CLK: this option is selected by every SoC which does not support new at91 clks based on common clk framework (SoC which does not define the clock tree in its device tree). This options is also selected when the user choose non dt boards support (new at91 clks can only be registered from a device tree definition). - COMMON_CLK_AT91: this option cannot be selected directly. Instead it is enabled if these 3 conditions are met: * at least one of the selected SoCs have a PMC (Power Management Controller) Unit * device tree support is enabled * the old at91 clk implementation is disabled (every selected SoC define its clks in its device tree and non dt boards support is disabled) - OLD_CLK_AT91: this option cannot be selected directly. Instead it is enabled if these 2 conditions are met: * at least one of the selected SoCs have a PMC (Power Management Controller) Unit * at least one of the selected SoCs does not define its clks in its device tree or non dt-boards support is enabled This patch selects AT91_USE_OLD_CLK in all currently supported SoCs. These selects will be removed after clk definitions are properly added in each soc's device tree. It also selects AT91_USE_OLD_CLK in all non-dt boards support. AT91_PMC_UNIT references are replaced by OLD_CLK_AT91, because PMC Unit is enabled for both old and common clk implementations, and old clk implementation should not be compiled if COMMON_CLK is enabled. To avoid future link errors, a new stub is created for at91_dt_clock_init function if OLD_CLK_AT91 is disabled. A new check is added in dt init functions (setup.c) to prepare for SoCs supporting new clk implementation. These SoCs won't setup the register_clocks callback (clk registration is done using of_clk_init). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 15:37:46 +08:00
select AT91_USE_OLD_CLK
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
select SOC_AT91SAM9G45
ARM: at91: add Kconfig options for common clk support This patch adds the following Kconfig options to prepare the transition to common clk framework: - AT91_USE_OLD_CLK: this option is selected by every SoC which does not support new at91 clks based on common clk framework (SoC which does not define the clock tree in its device tree). This options is also selected when the user choose non dt boards support (new at91 clks can only be registered from a device tree definition). - COMMON_CLK_AT91: this option cannot be selected directly. Instead it is enabled if these 3 conditions are met: * at least one of the selected SoCs have a PMC (Power Management Controller) Unit * device tree support is enabled * the old at91 clk implementation is disabled (every selected SoC define its clks in its device tree and non dt boards support is disabled) - OLD_CLK_AT91: this option cannot be selected directly. Instead it is enabled if these 2 conditions are met: * at least one of the selected SoCs have a PMC (Power Management Controller) Unit * at least one of the selected SoCs does not define its clks in its device tree or non dt-boards support is enabled This patch selects AT91_USE_OLD_CLK in all currently supported SoCs. These selects will be removed after clk definitions are properly added in each soc's device tree. It also selects AT91_USE_OLD_CLK in all non-dt boards support. AT91_PMC_UNIT references are replaced by OLD_CLK_AT91, because PMC Unit is enabled for both old and common clk implementations, and old clk implementation should not be compiled if COMMON_CLK is enabled. To avoid future link errors, a new stub is created for at91_dt_clock_init function if OLD_CLK_AT91 is disabled. A new check is added in dt init functions (setup.c) to prepare for SoCs supporting new clk implementation. These SoCs won't setup the register_clocks callback (clk registration is done using of_clk_init). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 15:37:46 +08:00
select AT91_USE_OLD_CLK
endchoice
config ARCH_AT91SAM9G20
bool
select ARCH_AT91SAM9260
config ARCH_AT91SAM9G10
bool
select ARCH_AT91SAM9261
# ----------------------------------------------------------
if ARCH_AT91RM9200
comment "AT91RM9200 Board Type"
config MACH_ONEARM
bool "Ajeco 1ARM Single Board Computer"
help
Select this if you are using Ajeco's 1ARM Single Board Computer.
<http://www.ajeco.fi/>
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
config MACH_CSB337
bool "Cogent CSB337"
help
Select this if you are using Cogent's CSB337 board.
<http://www.cogcomp.com/csb_csb337.htm>
config MACH_CSB637
bool "Cogent CSB637"
help
Select this if you are using Cogent's CSB637 board.
<http://www.cogcomp.com/csb_csb637.htm>
config MACH_CARMEVA
bool "Conitec ARM&EVA"
help
Select this if you are using Conitec's AT91RM9200-MCU-Module.
<http://www.conitec.net/english/linuxboard.php>
config MACH_ATEB9200
bool "Embest ATEB9200"
help
Select this if you are using Embest's ATEB9200 board.
<http://www.embedinfo.com/english/product/ATEB9200.asp>
config MACH_KB9200
bool "KwikByte KB920x"
help
Select this if you are using KwikByte's KB920x board.
<http://www.kwikbyte.com/KB9202.html>
config MACH_PICOTUX2XX
bool "picotux 200"
help
Select this if you are using a picotux 200.
<http://www.picotux.com/>
config MACH_KAFA
bool "Sperry-Sun KAFA board"
help
Select this if you are using Sperry-Sun's KAFA board.
config MACH_ECBAT91
bool "emQbit ECB_AT91 SBC"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using emQbit's ECB_AT91 board.
<http://wiki.emqbit.com/free-ecb-at91>
config MACH_YL9200
bool "ucDragon YL-9200"
help
Select this if you are using the ucDragon YL-9200 board.
config MACH_CPUAT91
bool "Eukrea CPUAT91"
help
Select this if you are using the Eukrea Electromatique's
CPUAT91 board <http://www.eukrea.com/>.
config MACH_ECO920
bool "eco920"
help
Select this if you are using the eco920 board
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9260
comment "AT91SAM9260 Variants"
comment "AT91SAM9260 / AT91SAM9XE Board Type"
config MACH_AT91SAM9260EK
bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
config MACH_CAM60
bool "KwikByte KB9260 (CAM60) board"
help
Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
<http://www.kwikbyte.com/KB9260.html>
config MACH_SAM9_L9260
bool "Olimex SAM9-L9260 board"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
<http://www.olimex.com/dev/sam9-L9260.html>
config MACH_AFEB9260
bool "Custom afeb9260 board v1"
help
Select this if you are using custom afeb9260 board based on
open hardware design. Select this for revision 1 of the board.
<svn://194.85.238.22/home/users/george/svn/arm9eb>
<http://groups.google.com/group/arm9fpga-evolution-board>
config MACH_CPU9260
bool "Eukrea CPU9260 board"
help
Select this if you are using a Eukrea Electromatique's
CPU9260 Board <http://www.eukrea.com/>
config MACH_FLEXIBITY
bool "Flexibity Connect board"
help
Select this if you are using Flexibity Connect board
<http://www.flexibity.com>
comment "AT91SAM9G20 Board Type"
config MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
that embeds only one SD/MMC slot.
config MACH_AT91SAM9G20EK_2MMC
depends on MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
help
Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
onwards.
<http://www.atmel.com/tools/SAM9G20-EK.aspx>
config MACH_CPU9G20
bool "Eukrea CPU9G20 board"
help
Select this if you are using a Eukrea Electromatique's
CPU9G20 Board <http://www.eukrea.com/>
config MACH_PORTUXG20
bool "taskit PortuxG20"
help
Select this if you are using taskit's PortuxG20.
<http://www.taskit.de/en/>
config MACH_STAMP9G20
bool "taskit Stamp9G20 CPU module"
help
Select this if you are using taskit's Stamp9G20 CPU module on its
evaluation board.
<http://www.taskit.de/en/>
config MACH_PCONTROL_G20
bool "PControl G20 CPU module"
help
Select this if you are using taskit's Stamp9G20 CPU module on this
carrier board, being the decentralized unit of a building automation
system; featuring nvram, eth-switch, iso-rs485, display, io
config MACH_GSIA18S
bool "GS_IA18_S board"
help
This enables support for the GS_IA18_S board
produced by GeoSIG Ltd company. This is an internet accelerograph.
<http://www.geosig.com>
config MACH_SNAPPER_9260
bool "Bluewater Systems Snapper 9260/9G20 module"
help
Select this if you are using the Bluewater Systems Snapper 9260 or
Snapper 9G20 modules.
<http://www.bluewatersys.com/>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9261
comment "AT91SAM9261 Board Type"
config MACH_AT91SAM9261EK
bool "Atmel AT91SAM9261-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
comment "AT91SAM9G10 Board Type"
config MACH_AT91SAM9G10EK
bool "Atmel AT91SAM9G10-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9263
comment "AT91SAM9263 Board Type"
config MACH_AT91SAM9263EK
bool "Atmel AT91SAM9263-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9RL
comment "AT91SAM9RL Board Type"
config MACH_AT91SAM9RLEK
bool "Atmel AT91SAM9RL-EK Evaluation Kit"
help
Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9G45
comment "AT91SAM9G45 Board Type"
config MACH_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
help
Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
<http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
endif
# ----------------------------------------------------------
if ARCH_AT91X40
comment "AT91X40 Board Type"
config MACH_AT91EB01
bool "Atmel AT91EB01 Evaluation Kit"
help
Select this if you are using Atmel's AT91EB01 Evaluation Kit.
It is also a popular target for simulators such as GDB's
ARM simulator (commonly known as the ARMulator) and the
Skyeye simulator.
endif
# ----------------------------------------------------------
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
depends on HAVE_AT91_DATAFLASH_CARD
help
Enable support for the DataFlash card.
endmenu