openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/tools/power/x86/turbostat/turbostat.c

1621 lines
37 KiB
C
Raw Normal View History

tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
/*
* turbostat -- show CPU frequency and C-state residency
* on modern Intel turbo-capable processors.
*
tools turbostat: add summary option turbostat -s cuts down on the amount of output, per user request. also treak some output whitespace and the man page. Signed-off-by: Len Brown <len.brown@intel.com>
2012-02-07 07:37:16 +08:00
* Copyright (c) 2012 Intel Corporation.
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
* Len Brown <len.brown@intel.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
tools turbostat: reduce measurement overhead due to IPIs turbostat uses /dev/cpu/*/msr interface to read MSRs. For modern systems, it reads 10 MSR/CPU. This can be observed as 10 "Function Call Interrupts" per CPU per sample added to /proc/interrupts. This overhead is measurable on large idle systems, and as Yoquan Song pointed out, it can even trick cpuidle into thinking the system is busy. Here turbostat re-schedules itself in-turn to each CPU so that its MSR reads will always be local. This replaces the 10 "Function Call Interrupts" with a single "Rescheduling interrupt" per sample per CPU. On an idle 32-CPU system, this shifts some residency from the shallow c1 state to the deeper c7 state: # ./turbostat.old -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.29 2.29 0.95 0.02 0.00 98.77 20.23 0.00 77.41 0.00 0.25 1.24 2.29 0.98 0.02 0.00 98.75 20.34 0.03 77.74 0.00 0.27 1.22 2.29 0.54 0.00 0.00 99.18 20.64 0.00 77.70 0.00 0.26 1.22 2.29 1.22 0.00 0.00 98.52 20.22 0.00 77.74 0.00 0.26 1.38 2.29 0.78 0.02 0.00 98.95 20.51 0.05 77.56 0.00 ^C i# ./turbostat.new -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.20 2.29 0.24 0.01 0.00 99.49 20.58 0.00 78.20 0.00 0.27 1.22 2.29 0.25 0.00 0.00 99.48 20.79 0.00 77.85 0.00 0.27 1.20 2.29 0.25 0.02 0.00 99.46 20.71 0.03 77.89 0.00 0.28 1.26 2.29 0.25 0.01 0.00 99.46 20.89 0.02 77.67 0.00 0.27 1.20 2.29 0.24 0.01 0.00 99.48 20.65 0.00 78.04 0.00 cc: Youquan Song <youquan.song@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 09:44:40 +08:00
#define _GNU_SOURCE
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
#include <stdio.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <sys/stat.h>
#include <sys/resource.h>
#include <fcntl.h>
#include <signal.h>
#include <sys/time.h>
#include <stdlib.h>
#include <dirent.h>
#include <string.h>
#include <ctype.h>
tools turbostat: reduce measurement overhead due to IPIs turbostat uses /dev/cpu/*/msr interface to read MSRs. For modern systems, it reads 10 MSR/CPU. This can be observed as 10 "Function Call Interrupts" per CPU per sample added to /proc/interrupts. This overhead is measurable on large idle systems, and as Yoquan Song pointed out, it can even trick cpuidle into thinking the system is busy. Here turbostat re-schedules itself in-turn to each CPU so that its MSR reads will always be local. This replaces the 10 "Function Call Interrupts" with a single "Rescheduling interrupt" per sample per CPU. On an idle 32-CPU system, this shifts some residency from the shallow c1 state to the deeper c7 state: # ./turbostat.old -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.29 2.29 0.95 0.02 0.00 98.77 20.23 0.00 77.41 0.00 0.25 1.24 2.29 0.98 0.02 0.00 98.75 20.34 0.03 77.74 0.00 0.27 1.22 2.29 0.54 0.00 0.00 99.18 20.64 0.00 77.70 0.00 0.26 1.22 2.29 1.22 0.00 0.00 98.52 20.22 0.00 77.74 0.00 0.26 1.38 2.29 0.78 0.02 0.00 98.95 20.51 0.05 77.56 0.00 ^C i# ./turbostat.new -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.20 2.29 0.24 0.01 0.00 99.49 20.58 0.00 78.20 0.00 0.27 1.22 2.29 0.25 0.00 0.00 99.48 20.79 0.00 77.85 0.00 0.27 1.20 2.29 0.25 0.02 0.00 99.46 20.71 0.03 77.89 0.00 0.28 1.26 2.29 0.25 0.01 0.00 99.46 20.89 0.02 77.67 0.00 0.27 1.20 2.29 0.24 0.01 0.00 99.48 20.65 0.00 78.04 0.00 cc: Youquan Song <youquan.song@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 09:44:40 +08:00
#include <sched.h>
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
#define MSR_NEHALEM_PLATFORM_INFO 0xCE
#define MSR_NEHALEM_TURBO_RATIO_LIMIT 0x1AD
tools/power turbostat: print more turbo-limit information The "turbo-limit" is the maximum opportunistic processor speed, assuming no electrical or thermal constraints. For a given processor, the turbo-limit varies, depending on the number of active cores. Generally, there is more opportunity when fewer cores are active. Under the "-v" verbose option, turbostat would print the turbo-limits for the four cases of 1 to 4 cores active. Expand that capability to cover the cases of turbo opportunities with up to 16 cores active. Note that not all hardware platforms supply this information, and that sometimes a valid limit may be specified for a core which is not actually present. Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21 12:01:31 +08:00
#define MSR_IVT_TURBO_RATIO_LIMIT 0x1AE
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
#define MSR_APERF 0xE8
#define MSR_MPERF 0xE7
#define MSR_PKG_C2_RESIDENCY 0x60D /* SNB only */
#define MSR_PKG_C3_RESIDENCY 0x3F8
#define MSR_PKG_C6_RESIDENCY 0x3F9
#define MSR_PKG_C7_RESIDENCY 0x3FA /* SNB only */
#define MSR_CORE_C3_RESIDENCY 0x3FC
#define MSR_CORE_C6_RESIDENCY 0x3FD
#define MSR_CORE_C7_RESIDENCY 0x3FE /* SNB only */
char *proc_stat = "/proc/stat";
unsigned int interval_sec = 5; /* set with -i interval_sec */
unsigned int verbose; /* set with -v */
tools turbostat: add summary option turbostat -s cuts down on the amount of output, per user request. also treak some output whitespace and the man page. Signed-off-by: Len Brown <len.brown@intel.com>
2012-02-07 07:37:16 +08:00
unsigned int summary_only; /* set with -s */
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
unsigned int skip_c0;
unsigned int skip_c1;
unsigned int do_nhm_cstates;
unsigned int do_snb_cstates;
unsigned int has_aperf;
unsigned int units = 1000000000; /* Ghz etc */
unsigned int genuine_intel;
unsigned int has_invariant_tsc;
unsigned int do_nehalem_platform_info;
unsigned int do_nehalem_turbo_ratio_limit;
tools/power turbostat: print more turbo-limit information The "turbo-limit" is the maximum opportunistic processor speed, assuming no electrical or thermal constraints. For a given processor, the turbo-limit varies, depending on the number of active cores. Generally, there is more opportunity when fewer cores are active. Under the "-v" verbose option, turbostat would print the turbo-limits for the four cases of 1 to 4 cores active. Expand that capability to cover the cases of turbo opportunities with up to 16 cores active. Note that not all hardware platforms supply this information, and that sometimes a valid limit may be specified for a core which is not actually present. Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21 12:01:31 +08:00
unsigned int do_ivt_turbo_ratio_limit;
tools/power turbostat: add [-m MSR#] option -m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 11:45:46 +08:00
unsigned int extra_msr_offset32;
unsigned int extra_msr_offset64;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
double bclk;
unsigned int show_pkg;
unsigned int show_core;
unsigned int show_cpu;
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
unsigned int show_pkg_only;
unsigned int show_core_only;
char *output_buffer, *outp;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
int aperf_mperf_unstable;
int backwards_count;
char *progname;
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
cpu_set_t *cpu_present_set, *cpu_affinity_set;
size_t cpu_present_setsize, cpu_affinity_setsize;
struct thread_data {
unsigned long long tsc;
unsigned long long aperf;
unsigned long long mperf;
unsigned long long c1; /* derived */
tools/power turbostat: add [-m MSR#] option -m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 11:45:46 +08:00
unsigned long long extra_msr64;
unsigned int extra_msr32;
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
unsigned int cpu_id;
unsigned int flags;
#define CPU_IS_FIRST_THREAD_IN_CORE 0x2
#define CPU_IS_FIRST_CORE_IN_PACKAGE 0x4
} *thread_even, *thread_odd;
struct core_data {
unsigned long long c3;
unsigned long long c6;
unsigned long long c7;
unsigned int core_id;
} *core_even, *core_odd;
struct pkg_data {
unsigned long long pc2;
unsigned long long pc3;
unsigned long long pc6;
unsigned long long pc7;
unsigned int package_id;
} *package_even, *package_odd;
#define ODD_COUNTERS thread_odd, core_odd, package_odd
#define EVEN_COUNTERS thread_even, core_even, package_even
#define GET_THREAD(thread_base, thread_no, core_no, pkg_no) \
(thread_base + (pkg_no) * topo.num_cores_per_pkg * \
topo.num_threads_per_core + \
(core_no) * topo.num_threads_per_core + (thread_no))
#define GET_CORE(core_base, core_no, pkg_no) \
(core_base + (pkg_no) * topo.num_cores_per_pkg + (core_no))
#define GET_PKG(pkg_base, pkg_no) (pkg_base + pkg_no)
struct system_summary {
struct thread_data threads;
struct core_data cores;
struct pkg_data packages;
} sum, average;
struct topo_params {
int num_packages;
int num_cpus;
int num_cores;
int max_cpu_num;
int num_cores_per_pkg;
int num_threads_per_core;
} topo;
struct timeval tv_even, tv_odd, tv_delta;
void setup_all_buffers(void);
int cpu_is_not_present(int cpu)
tools/power turbostat: fix un-intended affinity of forked program Linux 3.4 included a modification to turbostat to lower cross-call overhead by using scheduler affinity: 15aaa34654831e98dd76f7738b6c7f5d05a66430 (tools turbostat: reduce measurement overhead due to IPIs) In the use-case where turbostat forks a child program, that change had the un-intended side-effect of binding the child to the last cpu in the system. This change removed the binding before forking the child. This is a back-port of a fix already included in turbostat v2. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 11:24:00 +08:00
{
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
return !CPU_ISSET_S(cpu, cpu_present_setsize, cpu_present_set);
tools/power turbostat: fix un-intended affinity of forked program Linux 3.4 included a modification to turbostat to lower cross-call overhead by using scheduler affinity: 15aaa34654831e98dd76f7738b6c7f5d05a66430 (tools turbostat: reduce measurement overhead due to IPIs) In the use-case where turbostat forks a child program, that change had the un-intended side-effect of binding the child to the last cpu in the system. This change removed the binding before forking the child. This is a back-port of a fix already included in turbostat v2. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 11:24:00 +08:00
}
tools turbostat: reduce measurement overhead due to IPIs turbostat uses /dev/cpu/*/msr interface to read MSRs. For modern systems, it reads 10 MSR/CPU. This can be observed as 10 "Function Call Interrupts" per CPU per sample added to /proc/interrupts. This overhead is measurable on large idle systems, and as Yoquan Song pointed out, it can even trick cpuidle into thinking the system is busy. Here turbostat re-schedules itself in-turn to each CPU so that its MSR reads will always be local. This replaces the 10 "Function Call Interrupts" with a single "Rescheduling interrupt" per sample per CPU. On an idle 32-CPU system, this shifts some residency from the shallow c1 state to the deeper c7 state: # ./turbostat.old -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.29 2.29 0.95 0.02 0.00 98.77 20.23 0.00 77.41 0.00 0.25 1.24 2.29 0.98 0.02 0.00 98.75 20.34 0.03 77.74 0.00 0.27 1.22 2.29 0.54 0.00 0.00 99.18 20.64 0.00 77.70 0.00 0.26 1.22 2.29 1.22 0.00 0.00 98.52 20.22 0.00 77.74 0.00 0.26 1.38 2.29 0.78 0.02 0.00 98.95 20.51 0.05 77.56 0.00 ^C i# ./turbostat.new -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.20 2.29 0.24 0.01 0.00 99.49 20.58 0.00 78.20 0.00 0.27 1.22 2.29 0.25 0.00 0.00 99.48 20.79 0.00 77.85 0.00 0.27 1.20 2.29 0.25 0.02 0.00 99.46 20.71 0.03 77.89 0.00 0.28 1.26 2.29 0.25 0.01 0.00 99.46 20.89 0.02 77.67 0.00 0.27 1.20 2.29 0.24 0.01 0.00 99.48 20.65 0.00 78.04 0.00 cc: Youquan Song <youquan.song@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 09:44:40 +08:00
/*
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
* run func(thread, core, package) in topology order
* skip non-present cpus
tools turbostat: reduce measurement overhead due to IPIs turbostat uses /dev/cpu/*/msr interface to read MSRs. For modern systems, it reads 10 MSR/CPU. This can be observed as 10 "Function Call Interrupts" per CPU per sample added to /proc/interrupts. This overhead is measurable on large idle systems, and as Yoquan Song pointed out, it can even trick cpuidle into thinking the system is busy. Here turbostat re-schedules itself in-turn to each CPU so that its MSR reads will always be local. This replaces the 10 "Function Call Interrupts" with a single "Rescheduling interrupt" per sample per CPU. On an idle 32-CPU system, this shifts some residency from the shallow c1 state to the deeper c7 state: # ./turbostat.old -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.29 2.29 0.95 0.02 0.00 98.77 20.23 0.00 77.41 0.00 0.25 1.24 2.29 0.98 0.02 0.00 98.75 20.34 0.03 77.74 0.00 0.27 1.22 2.29 0.54 0.00 0.00 99.18 20.64 0.00 77.70 0.00 0.26 1.22 2.29 1.22 0.00 0.00 98.52 20.22 0.00 77.74 0.00 0.26 1.38 2.29 0.78 0.02 0.00 98.95 20.51 0.05 77.56 0.00 ^C i# ./turbostat.new -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.20 2.29 0.24 0.01 0.00 99.49 20.58 0.00 78.20 0.00 0.27 1.22 2.29 0.25 0.00 0.00 99.48 20.79 0.00 77.85 0.00 0.27 1.20 2.29 0.25 0.02 0.00 99.46 20.71 0.03 77.89 0.00 0.28 1.26 2.29 0.25 0.01 0.00 99.46 20.89 0.02 77.67 0.00 0.27 1.20 2.29 0.24 0.01 0.00 99.48 20.65 0.00 78.04 0.00 cc: Youquan Song <youquan.song@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 09:44:40 +08:00
*/
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
int for_all_cpus(int (func)(struct thread_data *, struct core_data *, struct pkg_data *),
struct thread_data *thread_base, struct core_data *core_base, struct pkg_data *pkg_base)
tools turbostat: reduce measurement overhead due to IPIs turbostat uses /dev/cpu/*/msr interface to read MSRs. For modern systems, it reads 10 MSR/CPU. This can be observed as 10 "Function Call Interrupts" per CPU per sample added to /proc/interrupts. This overhead is measurable on large idle systems, and as Yoquan Song pointed out, it can even trick cpuidle into thinking the system is busy. Here turbostat re-schedules itself in-turn to each CPU so that its MSR reads will always be local. This replaces the 10 "Function Call Interrupts" with a single "Rescheduling interrupt" per sample per CPU. On an idle 32-CPU system, this shifts some residency from the shallow c1 state to the deeper c7 state: # ./turbostat.old -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.29 2.29 0.95 0.02 0.00 98.77 20.23 0.00 77.41 0.00 0.25 1.24 2.29 0.98 0.02 0.00 98.75 20.34 0.03 77.74 0.00 0.27 1.22 2.29 0.54 0.00 0.00 99.18 20.64 0.00 77.70 0.00 0.26 1.22 2.29 1.22 0.00 0.00 98.52 20.22 0.00 77.74 0.00 0.26 1.38 2.29 0.78 0.02 0.00 98.95 20.51 0.05 77.56 0.00 ^C i# ./turbostat.new -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.20 2.29 0.24 0.01 0.00 99.49 20.58 0.00 78.20 0.00 0.27 1.22 2.29 0.25 0.00 0.00 99.48 20.79 0.00 77.85 0.00 0.27 1.20 2.29 0.25 0.02 0.00 99.46 20.71 0.03 77.89 0.00 0.28 1.26 2.29 0.25 0.01 0.00 99.46 20.89 0.02 77.67 0.00 0.27 1.20 2.29 0.24 0.01 0.00 99.48 20.65 0.00 78.04 0.00 cc: Youquan Song <youquan.song@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 09:44:40 +08:00
{
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
int retval, pkg_no, core_no, thread_no;
tools/power turbostat: fix un-intended affinity of forked program Linux 3.4 included a modification to turbostat to lower cross-call overhead by using scheduler affinity: 15aaa34654831e98dd76f7738b6c7f5d05a66430 (tools turbostat: reduce measurement overhead due to IPIs) In the use-case where turbostat forks a child program, that change had the un-intended side-effect of binding the child to the last cpu in the system. This change removed the binding before forking the child. This is a back-port of a fix already included in turbostat v2. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 11:24:00 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
for (pkg_no = 0; pkg_no < topo.num_packages; ++pkg_no) {
for (core_no = 0; core_no < topo.num_cores_per_pkg; ++core_no) {
for (thread_no = 0; thread_no <
topo.num_threads_per_core; ++thread_no) {
struct thread_data *t;
struct core_data *c;
struct pkg_data *p;
tools turbostat: reduce measurement overhead due to IPIs turbostat uses /dev/cpu/*/msr interface to read MSRs. For modern systems, it reads 10 MSR/CPU. This can be observed as 10 "Function Call Interrupts" per CPU per sample added to /proc/interrupts. This overhead is measurable on large idle systems, and as Yoquan Song pointed out, it can even trick cpuidle into thinking the system is busy. Here turbostat re-schedules itself in-turn to each CPU so that its MSR reads will always be local. This replaces the 10 "Function Call Interrupts" with a single "Rescheduling interrupt" per sample per CPU. On an idle 32-CPU system, this shifts some residency from the shallow c1 state to the deeper c7 state: # ./turbostat.old -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.29 2.29 0.95 0.02 0.00 98.77 20.23 0.00 77.41 0.00 0.25 1.24 2.29 0.98 0.02 0.00 98.75 20.34 0.03 77.74 0.00 0.27 1.22 2.29 0.54 0.00 0.00 99.18 20.64 0.00 77.70 0.00 0.26 1.22 2.29 1.22 0.00 0.00 98.52 20.22 0.00 77.74 0.00 0.26 1.38 2.29 0.78 0.02 0.00 98.95 20.51 0.05 77.56 0.00 ^C i# ./turbostat.new -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.20 2.29 0.24 0.01 0.00 99.49 20.58 0.00 78.20 0.00 0.27 1.22 2.29 0.25 0.00 0.00 99.48 20.79 0.00 77.85 0.00 0.27 1.20 2.29 0.25 0.02 0.00 99.46 20.71 0.03 77.89 0.00 0.28 1.26 2.29 0.25 0.01 0.00 99.46 20.89 0.02 77.67 0.00 0.27 1.20 2.29 0.24 0.01 0.00 99.48 20.65 0.00 78.04 0.00 cc: Youquan Song <youquan.song@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 09:44:40 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
t = GET_THREAD(thread_base, thread_no, core_no, pkg_no);
if (cpu_is_not_present(t->cpu_id))
continue;
c = GET_CORE(core_base, core_no, pkg_no);
p = GET_PKG(pkg_base, pkg_no);
retval = func(t, c, p);
if (retval)
return retval;
}
}
}
return 0;
tools turbostat: reduce measurement overhead due to IPIs turbostat uses /dev/cpu/*/msr interface to read MSRs. For modern systems, it reads 10 MSR/CPU. This can be observed as 10 "Function Call Interrupts" per CPU per sample added to /proc/interrupts. This overhead is measurable on large idle systems, and as Yoquan Song pointed out, it can even trick cpuidle into thinking the system is busy. Here turbostat re-schedules itself in-turn to each CPU so that its MSR reads will always be local. This replaces the 10 "Function Call Interrupts" with a single "Rescheduling interrupt" per sample per CPU. On an idle 32-CPU system, this shifts some residency from the shallow c1 state to the deeper c7 state: # ./turbostat.old -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.29 2.29 0.95 0.02 0.00 98.77 20.23 0.00 77.41 0.00 0.25 1.24 2.29 0.98 0.02 0.00 98.75 20.34 0.03 77.74 0.00 0.27 1.22 2.29 0.54 0.00 0.00 99.18 20.64 0.00 77.70 0.00 0.26 1.22 2.29 1.22 0.00 0.00 98.52 20.22 0.00 77.74 0.00 0.26 1.38 2.29 0.78 0.02 0.00 98.95 20.51 0.05 77.56 0.00 ^C i# ./turbostat.new -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.20 2.29 0.24 0.01 0.00 99.49 20.58 0.00 78.20 0.00 0.27 1.22 2.29 0.25 0.00 0.00 99.48 20.79 0.00 77.85 0.00 0.27 1.20 2.29 0.25 0.02 0.00 99.46 20.71 0.03 77.89 0.00 0.28 1.26 2.29 0.25 0.01 0.00 99.46 20.89 0.02 77.67 0.00 0.27 1.20 2.29 0.24 0.01 0.00 99.48 20.65 0.00 78.04 0.00 cc: Youquan Song <youquan.song@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 09:44:40 +08:00
}
int cpu_migrate(int cpu)
{
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
CPU_ZERO_S(cpu_affinity_setsize, cpu_affinity_set);
CPU_SET_S(cpu, cpu_affinity_setsize, cpu_affinity_set);
if (sched_setaffinity(0, cpu_affinity_setsize, cpu_affinity_set) == -1)
tools turbostat: reduce measurement overhead due to IPIs turbostat uses /dev/cpu/*/msr interface to read MSRs. For modern systems, it reads 10 MSR/CPU. This can be observed as 10 "Function Call Interrupts" per CPU per sample added to /proc/interrupts. This overhead is measurable on large idle systems, and as Yoquan Song pointed out, it can even trick cpuidle into thinking the system is busy. Here turbostat re-schedules itself in-turn to each CPU so that its MSR reads will always be local. This replaces the 10 "Function Call Interrupts" with a single "Rescheduling interrupt" per sample per CPU. On an idle 32-CPU system, this shifts some residency from the shallow c1 state to the deeper c7 state: # ./turbostat.old -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.29 2.29 0.95 0.02 0.00 98.77 20.23 0.00 77.41 0.00 0.25 1.24 2.29 0.98 0.02 0.00 98.75 20.34 0.03 77.74 0.00 0.27 1.22 2.29 0.54 0.00 0.00 99.18 20.64 0.00 77.70 0.00 0.26 1.22 2.29 1.22 0.00 0.00 98.52 20.22 0.00 77.74 0.00 0.26 1.38 2.29 0.78 0.02 0.00 98.95 20.51 0.05 77.56 0.00 ^C i# ./turbostat.new -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.20 2.29 0.24 0.01 0.00 99.49 20.58 0.00 78.20 0.00 0.27 1.22 2.29 0.25 0.00 0.00 99.48 20.79 0.00 77.85 0.00 0.27 1.20 2.29 0.25 0.02 0.00 99.46 20.71 0.03 77.89 0.00 0.28 1.26 2.29 0.25 0.01 0.00 99.46 20.89 0.02 77.67 0.00 0.27 1.20 2.29 0.24 0.01 0.00 99.48 20.65 0.00 78.04 0.00 cc: Youquan Song <youquan.song@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 09:44:40 +08:00
return -1;
else
return 0;
}
tools turbostat: harden against cpu online/offline Sometimes users have turbostat running in interval mode when they take processors offline/online. Previously, turbostat would survive, but not gracefully. Tighten up the error checking so turbostat notices changesn sooner, and print just 1 line on change: turbostat: re-initialized with num_cpus %d Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 10:19:58 +08:00
int get_msr(int cpu, off_t offset, unsigned long long *msr)
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
{
ssize_t retval;
char pathname[32];
int fd;
sprintf(pathname, "/dev/cpu/%d/msr", cpu);
fd = open(pathname, O_RDONLY);
tools turbostat: harden against cpu online/offline Sometimes users have turbostat running in interval mode when they take processors offline/online. Previously, turbostat would survive, but not gracefully. Tighten up the error checking so turbostat notices changesn sooner, and print just 1 line on change: turbostat: re-initialized with num_cpus %d Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 10:19:58 +08:00
if (fd < 0)
return -1;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools turbostat: harden against cpu online/offline Sometimes users have turbostat running in interval mode when they take processors offline/online. Previously, turbostat would survive, but not gracefully. Tighten up the error checking so turbostat notices changesn sooner, and print just 1 line on change: turbostat: re-initialized with num_cpus %d Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 10:19:58 +08:00
retval = pread(fd, msr, sizeof *msr, offset);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
close(fd);
tools turbostat: harden against cpu online/offline Sometimes users have turbostat running in interval mode when they take processors offline/online. Previously, turbostat would survive, but not gracefully. Tighten up the error checking so turbostat notices changesn sooner, and print just 1 line on change: turbostat: re-initialized with num_cpus %d Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 10:19:58 +08:00
if (retval != sizeof *msr)
return -1;
return 0;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
tools/power turbostat: add [-m MSR#] option -m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 11:45:46 +08:00
/*
* Truncate the 8 bytes we read from /dev/cpu/.../msr
* to the 4 bytes requested
*/
int get_msr32(int cpu, off_t offset, unsigned int *msr)
{
int retval;
unsigned long long msr64;
retval = get_msr(cpu, offset, &msr64);
*msr = (unsigned int) msr64;
return retval;
}
tools: turbostat: style updates Follow kernel coding style traditions more closely. Delete typedef, re-name "per cpu counters" to simply be counters etc. This patch changes no functionality. Suggested-by: Thiago Farina <tfransosi@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-02-11 12:36:34 +08:00
void print_header(void)
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
{
if (show_pkg)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, "pk");
tools turbostat: add summary option turbostat -s cuts down on the amount of output, per user request. also treak some output whitespace and the man page. Signed-off-by: Len Brown <len.brown@intel.com>
2012-02-07 07:37:16 +08:00
if (show_pkg)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " ");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (show_core)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, "cor");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (show_cpu)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " CPU");
tools turbostat: add summary option turbostat -s cuts down on the amount of output, per user request. also treak some output whitespace and the man page. Signed-off-by: Len Brown <len.brown@intel.com>
2012-02-07 07:37:16 +08:00
if (show_pkg || show_core || show_cpu)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " ");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_nhm_cstates)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %%c0");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (has_aperf)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " GHz");
outp += sprintf(outp, " TSC");
tools/power turbostat: add [-m MSR#] option -m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 11:45:46 +08:00
if (extra_msr_offset32)
outp += sprintf(outp, " MSR 0x%04X", extra_msr_offset32);
if (extra_msr_offset64)
outp += sprintf(outp, " MSR 0x%04X", extra_msr_offset64);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_nhm_cstates)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %%c1");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_nhm_cstates)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %%c3");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_nhm_cstates)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %%c6");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_snb_cstates)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %%c7");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_snb_cstates)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %%pc2");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_nhm_cstates)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %%pc3");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_nhm_cstates)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %%pc6");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_snb_cstates)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %%pc7");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, "\n");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
int dump_counters(struct thread_data *t, struct core_data *c,
struct pkg_data *p)
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
{
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
fprintf(stderr, "t %p, c %p, p %p\n", t, c, p);
if (t) {
fprintf(stderr, "CPU: %d flags 0x%x\n", t->cpu_id, t->flags);
fprintf(stderr, "TSC: %016llX\n", t->tsc);
fprintf(stderr, "aperf: %016llX\n", t->aperf);
fprintf(stderr, "mperf: %016llX\n", t->mperf);
fprintf(stderr, "c1: %016llX\n", t->c1);
tools/power turbostat: add [-m MSR#] option -m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 11:45:46 +08:00
fprintf(stderr, "msr0x%x: %08X\n",
extra_msr_offset32, t->extra_msr32);
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
fprintf(stderr, "msr0x%x: %016llX\n",
tools/power turbostat: add [-m MSR#] option -m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 11:45:46 +08:00
extra_msr_offset64, t->extra_msr64);
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
}
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
if (c) {
fprintf(stderr, "core: %d\n", c->core_id);
fprintf(stderr, "c3: %016llX\n", c->c3);
fprintf(stderr, "c6: %016llX\n", c->c6);
fprintf(stderr, "c7: %016llX\n", c->c7);
}
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
if (p) {
fprintf(stderr, "package: %d\n", p->package_id);
fprintf(stderr, "pc2: %016llX\n", p->pc2);
fprintf(stderr, "pc3: %016llX\n", p->pc3);
fprintf(stderr, "pc6: %016llX\n", p->pc6);
fprintf(stderr, "pc7: %016llX\n", p->pc7);
}
return 0;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
tools turbostat: add summary option turbostat -s cuts down on the amount of output, per user request. also treak some output whitespace and the man page. Signed-off-by: Len Brown <len.brown@intel.com>
2012-02-07 07:37:16 +08:00
/*
* column formatting convention & formats
* package: "pk" 2 columns %2d
* core: "cor" 3 columns %3d
* CPU: "CPU" 3 columns %3d
* GHz: "GHz" 3 columns %3.2
* TSC: "TSC" 3 columns %3.2
* percentage " %pc3" %6.2
*/
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
int format_counters(struct thread_data *t, struct core_data *c,
struct pkg_data *p)
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
{
double interval_float;
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
/* if showing only 1st thread in core and this isn't one, bail out */
if (show_core_only && !(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
return 0;
/* if showing only 1st thread in pkg and this isn't one, bail out */
if (show_pkg_only && !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
return 0;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
interval_float = tv_delta.tv_sec + tv_delta.tv_usec/1000000.0;
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
/* topo columns, print blanks on 1st (average) line */
if (t == &average.threads) {
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (show_pkg)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " ");
tools turbostat: add summary option turbostat -s cuts down on the amount of output, per user request. also treak some output whitespace and the man page. Signed-off-by: Len Brown <len.brown@intel.com>
2012-02-07 07:37:16 +08:00
if (show_pkg && show_core)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " ");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (show_core)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " ");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (show_cpu)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " " " ");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
} else {
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
if (show_pkg) {
if (p)
outp += sprintf(outp, "%2d", p->package_id);
else
outp += sprintf(outp, " ");
}
tools turbostat: add summary option turbostat -s cuts down on the amount of output, per user request. also treak some output whitespace and the man page. Signed-off-by: Len Brown <len.brown@intel.com>
2012-02-07 07:37:16 +08:00
if (show_pkg && show_core)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " ");
if (show_core) {
if (c)
outp += sprintf(outp, "%3d", c->core_id);
else
outp += sprintf(outp, " ");
}
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (show_cpu)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %3d", t->cpu_id);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
/* %c0 */
if (do_nhm_cstates) {
tools turbostat: add summary option turbostat -s cuts down on the amount of output, per user request. also treak some output whitespace and the man page. Signed-off-by: Len Brown <len.brown@intel.com>
2012-02-07 07:37:16 +08:00
if (show_pkg || show_core || show_cpu)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " ");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (!skip_c0)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, "%6.2f", 100.0 * t->mperf/t->tsc);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
else
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " ****");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
/* GHz */
if (has_aperf) {
if (!aperf_mperf_unstable) {
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %3.2f",
1.0 * t->tsc / units * t->aperf /
t->mperf / interval_float);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
} else {
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
if (t->aperf > t->tsc || t->mperf > t->tsc) {
outp += sprintf(outp, " ***");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
} else {
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, "%3.1f*",
1.0 * t->tsc /
units * t->aperf /
t->mperf / interval_float);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
}
}
/* TSC */
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, "%5.2f", 1.0 * t->tsc/units/interval_float);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power turbostat: add [-m MSR#] option -m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 11:45:46 +08:00
/* msr */
if (extra_msr_offset32)
outp += sprintf(outp, " 0x%08x", t->extra_msr32);
tools/power turbostat: make -M output pretty The -M option dumps the specified 64-bit MSR with every sample. Previously it was output at the end of each line. However, with the v2 style of printing, the lines are now staggered, making MSR output hard to read. So move the MSR output column to the left where things are aligned. Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 10:56:06 +08:00
/* MSR */
tools/power turbostat: add [-m MSR#] option -m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 11:45:46 +08:00
if (extra_msr_offset64)
outp += sprintf(outp, " 0x%016llx", t->extra_msr64);
tools/power turbostat: make -M output pretty The -M option dumps the specified 64-bit MSR with every sample. Previously it was output at the end of each line. However, with the v2 style of printing, the lines are now staggered, making MSR output hard to read. So move the MSR output column to the left where things are aligned. Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 10:56:06 +08:00
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_nhm_cstates) {
if (!skip_c1)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %6.2f", 100.0 * t->c1/t->tsc);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
else
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " ****");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
/* print per-core data only for 1st thread in core */
if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
goto done;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_nhm_cstates)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %6.2f", 100.0 * c->c3/t->tsc);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_nhm_cstates)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %6.2f", 100.0 * c->c6/t->tsc);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_snb_cstates)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %6.2f", 100.0 * c->c7/t->tsc);
/* print per-package data only for 1st core in package */
if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
goto done;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_snb_cstates)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %6.2f", 100.0 * p->pc2/t->tsc);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_nhm_cstates)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %6.2f", 100.0 * p->pc3/t->tsc);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_nhm_cstates)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %6.2f", 100.0 * p->pc6/t->tsc);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (do_snb_cstates)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
outp += sprintf(outp, " %6.2f", 100.0 * p->pc7/t->tsc);
done:
outp += sprintf(outp, "\n");
return 0;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
void flush_stdout()
{
fputs(output_buffer, stdout);
outp = output_buffer;
}
void flush_stderr()
{
fputs(output_buffer, stderr);
outp = output_buffer;
}
void format_all_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
{
tools turbostat: add summary option turbostat -s cuts down on the amount of output, per user request. also treak some output whitespace and the man page. Signed-off-by: Len Brown <len.brown@intel.com>
2012-02-07 07:37:16 +08:00
static int printed;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools turbostat: add summary option turbostat -s cuts down on the amount of output, per user request. also treak some output whitespace and the man page. Signed-off-by: Len Brown <len.brown@intel.com>
2012-02-07 07:37:16 +08:00
if (!printed || !summary_only)
print_header();
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
if (topo.num_cpus > 1)
format_counters(&average.threads, &average.cores,
&average.packages);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools turbostat: add summary option turbostat -s cuts down on the amount of output, per user request. also treak some output whitespace and the man page. Signed-off-by: Len Brown <len.brown@intel.com>
2012-02-07 07:37:16 +08:00
printed = 1;
if (summary_only)
return;
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
for_all_cpus(format_counters, t, c, p);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
void
delta_package(struct pkg_data *new, struct pkg_data *old)
{
old->pc2 = new->pc2 - old->pc2;
old->pc3 = new->pc3 - old->pc3;
old->pc6 = new->pc6 - old->pc6;
old->pc7 = new->pc7 - old->pc7;
}
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
void
delta_core(struct core_data *new, struct core_data *old)
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
{
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
old->c3 = new->c3 - old->c3;
old->c6 = new->c6 - old->c6;
old->c7 = new->c7 - old->c7;
}
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat: fix large c1% issue Under some conditions, c1% was displayed as very large number, much higher than 100%. c1% is not measured, it is derived as "that, which is left over" from other counters. However, the other counters are not collected atomically, and so it is possible for c1% to be calaculagted as a small negative number -- displayed as very large positive. There was a check for mperf vs tsc for this already, but it needed to also include the other counters that are used to calculate c1. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-14 09:31:46 +08:00
/*
* old = new - old
*/
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
void
delta_thread(struct thread_data *new, struct thread_data *old,
struct core_data *core_delta)
{
old->tsc = new->tsc - old->tsc;
/* check for TSC < 1 Mcycles over interval */
if (old->tsc < (1000 * 1000)) {
fprintf(stderr, "Insanely slow TSC rate, TSC stops in idle?\n");
fprintf(stderr, "You can disable all c-states by booting with \"idle=poll\"\n");
fprintf(stderr, "or just the deep ones with \"processor.max_cstate=1\"\n");
exit(-3);
}
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
old->c1 = new->c1 - old->c1;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
if ((new->aperf > old->aperf) && (new->mperf > old->mperf)) {
old->aperf = new->aperf - old->aperf;
old->mperf = new->mperf - old->mperf;
} else {
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
if (!aperf_mperf_unstable) {
fprintf(stderr, "%s: APERF or MPERF went backwards *\n", progname);
fprintf(stderr, "* Frequency results do not cover entire interval *\n");
fprintf(stderr, "* fix this by running Linux-2.6.30 or later *\n");
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
aperf_mperf_unstable = 1;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
/*
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
* mperf delta is likely a huge "positive" number
* can not use it for calculating c0 time
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
*/
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
skip_c0 = 1;
skip_c1 = 1;
}
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
/*
tools/power: turbostat: fix large c1% issue Under some conditions, c1% was displayed as very large number, much higher than 100%. c1% is not measured, it is derived as "that, which is left over" from other counters. However, the other counters are not collected atomically, and so it is possible for c1% to be calaculagted as a small negative number -- displayed as very large positive. There was a check for mperf vs tsc for this already, but it needed to also include the other counters that are used to calculate c1. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-14 09:31:46 +08:00
* As counter collection is not atomic,
* it is possible for mperf's non-halted cycles + idle states
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
* to exceed TSC's all cycles: show c1 = 0% in that case.
*/
tools/power: turbostat: fix large c1% issue Under some conditions, c1% was displayed as very large number, much higher than 100%. c1% is not measured, it is derived as "that, which is left over" from other counters. However, the other counters are not collected atomically, and so it is possible for c1% to be calaculagted as a small negative number -- displayed as very large positive. There was a check for mperf vs tsc for this already, but it needed to also include the other counters that are used to calculate c1. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-14 09:31:46 +08:00
if ((old->mperf + core_delta->c3 + core_delta->c6 + core_delta->c7) > old->tsc)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
old->c1 = 0;
else {
/* normal case, derive c1 */
old->c1 = old->tsc - old->mperf - core_delta->c3
- core_delta->c6 - core_delta->c7;
}
tools/power: turbostat: fix large c1% issue Under some conditions, c1% was displayed as very large number, much higher than 100%. c1% is not measured, it is derived as "that, which is left over" from other counters. However, the other counters are not collected atomically, and so it is possible for c1% to be calaculagted as a small negative number -- displayed as very large positive. There was a check for mperf vs tsc for this already, but it needed to also include the other counters that are used to calculate c1. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-14 09:31:46 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
if (old->mperf == 0) {
tools/power: turbostat: fix large c1% issue Under some conditions, c1% was displayed as very large number, much higher than 100%. c1% is not measured, it is derived as "that, which is left over" from other counters. However, the other counters are not collected atomically, and so it is possible for c1% to be calaculagted as a small negative number -- displayed as very large positive. There was a check for mperf vs tsc for this already, but it needed to also include the other counters that are used to calculate c1. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-14 09:31:46 +08:00
if (verbose > 1) fprintf(stderr, "cpu%d MPERF 0!\n", old->cpu_id);
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
old->mperf = 1; /* divide by 0 protection */
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
/*
tools/power turbostat: add [-m MSR#] option -m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 11:45:46 +08:00
* Extra MSR is a snapshot, simply copy latest w/o subtracting
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
*/
tools/power turbostat: add [-m MSR#] option -m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 11:45:46 +08:00
old->extra_msr32 = new->extra_msr32;
old->extra_msr64 = new->extra_msr64;
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
}
int delta_cpu(struct thread_data *t, struct core_data *c,
struct pkg_data *p, struct thread_data *t2,
struct core_data *c2, struct pkg_data *p2)
{
/* calculate core delta only for 1st thread in core */
if (t->flags & CPU_IS_FIRST_THREAD_IN_CORE)
delta_core(c, c2);
/* always calculate thread delta */
delta_thread(t, t2, c2); /* c2 is core delta */
/* calculate package delta only for 1st core in package */
if (t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)
delta_package(p, p2);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
return 0;
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
void clear_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
{
t->tsc = 0;
t->aperf = 0;
t->mperf = 0;
t->c1 = 0;
/* tells format_counters to dump all fields from this set */
t->flags = CPU_IS_FIRST_THREAD_IN_CORE | CPU_IS_FIRST_CORE_IN_PACKAGE;
c->c3 = 0;
c->c6 = 0;
c->c7 = 0;
p->pc2 = 0;
p->pc3 = 0;
p->pc6 = 0;
p->pc7 = 0;
}
int sum_counters(struct thread_data *t, struct core_data *c,
struct pkg_data *p)
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
{
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
average.threads.tsc += t->tsc;
average.threads.aperf += t->aperf;
average.threads.mperf += t->mperf;
average.threads.c1 += t->c1;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
/* sum per-core values only for 1st thread in core */
if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
return 0;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
average.cores.c3 += c->c3;
average.cores.c6 += c->c6;
average.cores.c7 += c->c7;
/* sum per-pkg values only for 1st core in pkg */
if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
return 0;
average.packages.pc2 += p->pc2;
average.packages.pc3 += p->pc3;
average.packages.pc6 += p->pc6;
average.packages.pc7 += p->pc7;
return 0;
}
/*
* sum the counters for all cpus in the system
* compute the weighted average
*/
void compute_average(struct thread_data *t, struct core_data *c,
struct pkg_data *p)
{
clear_counters(&average.threads, &average.cores, &average.packages);
for_all_cpus(sum_counters, t, c, p);
average.threads.tsc /= topo.num_cpus;
average.threads.aperf /= topo.num_cpus;
average.threads.mperf /= topo.num_cpus;
average.threads.c1 /= topo.num_cpus;
average.cores.c3 /= topo.num_cores;
average.cores.c6 /= topo.num_cores;
average.cores.c7 /= topo.num_cores;
average.packages.pc2 /= topo.num_packages;
average.packages.pc3 /= topo.num_packages;
average.packages.pc6 /= topo.num_packages;
average.packages.pc7 /= topo.num_packages;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
static unsigned long long rdtsc(void)
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
{
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
unsigned int low, high;
tools turbostat: harden against cpu online/offline Sometimes users have turbostat running in interval mode when they take processors offline/online. Previously, turbostat would survive, but not gracefully. Tighten up the error checking so turbostat notices changesn sooner, and print just 1 line on change: turbostat: re-initialized with num_cpus %d Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 10:19:58 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
asm volatile("rdtsc" : "=a" (low), "=d" (high));
tools turbostat: harden against cpu online/offline Sometimes users have turbostat running in interval mode when they take processors offline/online. Previously, turbostat would survive, but not gracefully. Tighten up the error checking so turbostat notices changesn sooner, and print just 1 line on change: turbostat: re-initialized with num_cpus %d Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 10:19:58 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
return low | ((unsigned long long)high) << 32;
}
tools turbostat: harden against cpu online/offline Sometimes users have turbostat running in interval mode when they take processors offline/online. Previously, turbostat would survive, but not gracefully. Tighten up the error checking so turbostat notices changesn sooner, and print just 1 line on change: turbostat: re-initialized with num_cpus %d Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 10:19:58 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
/*
* get_counters(...)
* migrate to cpu
* acquire and record local counters for that cpu
*/
int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
{
int cpu = t->cpu_id;
tools turbostat: reduce measurement overhead due to IPIs turbostat uses /dev/cpu/*/msr interface to read MSRs. For modern systems, it reads 10 MSR/CPU. This can be observed as 10 "Function Call Interrupts" per CPU per sample added to /proc/interrupts. This overhead is measurable on large idle systems, and as Yoquan Song pointed out, it can even trick cpuidle into thinking the system is busy. Here turbostat re-schedules itself in-turn to each CPU so that its MSR reads will always be local. This replaces the 10 "Function Call Interrupts" with a single "Rescheduling interrupt" per sample per CPU. On an idle 32-CPU system, this shifts some residency from the shallow c1 state to the deeper c7 state: # ./turbostat.old -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.29 2.29 0.95 0.02 0.00 98.77 20.23 0.00 77.41 0.00 0.25 1.24 2.29 0.98 0.02 0.00 98.75 20.34 0.03 77.74 0.00 0.27 1.22 2.29 0.54 0.00 0.00 99.18 20.64 0.00 77.70 0.00 0.26 1.22 2.29 1.22 0.00 0.00 98.52 20.22 0.00 77.74 0.00 0.26 1.38 2.29 0.78 0.02 0.00 98.95 20.51 0.05 77.56 0.00 ^C i# ./turbostat.new -s %c0 GHz TSC %c1 %c3 %c6 %c7 %pc2 %pc3 %pc6 %pc7 0.27 1.20 2.29 0.24 0.01 0.00 99.49 20.58 0.00 78.20 0.00 0.27 1.22 2.29 0.25 0.00 0.00 99.48 20.79 0.00 77.85 0.00 0.27 1.20 2.29 0.25 0.02 0.00 99.46 20.71 0.03 77.89 0.00 0.28 1.26 2.29 0.25 0.01 0.00 99.46 20.89 0.02 77.67 0.00 0.27 1.20 2.29 0.24 0.01 0.00 99.48 20.65 0.00 78.04 0.00 cc: Youquan Song <youquan.song@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 09:44:40 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
if (cpu_migrate(cpu))
return -1;
tools turbostat: harden against cpu online/offline Sometimes users have turbostat running in interval mode when they take processors offline/online. Previously, turbostat would survive, but not gracefully. Tighten up the error checking so turbostat notices changesn sooner, and print just 1 line on change: turbostat: re-initialized with num_cpus %d Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 10:19:58 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
t->tsc = rdtsc(); /* we are running on local CPU of interest */
if (has_aperf) {
if (get_msr(cpu, MSR_APERF, &t->aperf))
return -3;
if (get_msr(cpu, MSR_MPERF, &t->mperf))
return -4;
}
tools/power turbostat: add [-m MSR#] option -m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 11:45:46 +08:00
if (extra_msr_offset32)
if (get_msr32(cpu, extra_msr_offset32, &t->extra_msr32))
return -5;
if (extra_msr_offset64)
if (get_msr(cpu, extra_msr_offset64, &t->extra_msr64))
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
return -5;
/* collect core counters only for 1st thread in core */
if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
return 0;
if (do_nhm_cstates) {
if (get_msr(cpu, MSR_CORE_C3_RESIDENCY, &c->c3))
return -6;
if (get_msr(cpu, MSR_CORE_C6_RESIDENCY, &c->c6))
return -7;
}
if (do_snb_cstates)
if (get_msr(cpu, MSR_CORE_C7_RESIDENCY, &c->c7))
return -8;
/* collect package counters only for 1st core in package */
if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
return 0;
if (do_nhm_cstates) {
if (get_msr(cpu, MSR_PKG_C3_RESIDENCY, &p->pc3))
return -9;
if (get_msr(cpu, MSR_PKG_C6_RESIDENCY, &p->pc6))
return -10;
}
if (do_snb_cstates) {
if (get_msr(cpu, MSR_PKG_C2_RESIDENCY, &p->pc2))
return -11;
if (get_msr(cpu, MSR_PKG_C7_RESIDENCY, &p->pc7))
return -12;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
tools turbostat: harden against cpu online/offline Sometimes users have turbostat running in interval mode when they take processors offline/online. Previously, turbostat would survive, but not gracefully. Tighten up the error checking so turbostat notices changesn sooner, and print just 1 line on change: turbostat: re-initialized with num_cpus %d Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 10:19:58 +08:00
return 0;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
void print_verbose_header(void)
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
{
unsigned long long msr;
unsigned int ratio;
if (!do_nehalem_platform_info)
return;
tools turbostat: harden against cpu online/offline Sometimes users have turbostat running in interval mode when they take processors offline/online. Previously, turbostat would survive, but not gracefully. Tighten up the error checking so turbostat notices changesn sooner, and print just 1 line on change: turbostat: re-initialized with num_cpus %d Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 10:19:58 +08:00
get_msr(0, MSR_NEHALEM_PLATFORM_INFO, &msr);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power turbostat: print more turbo-limit information The "turbo-limit" is the maximum opportunistic processor speed, assuming no electrical or thermal constraints. For a given processor, the turbo-limit varies, depending on the number of active cores. Generally, there is more opportunity when fewer cores are active. Under the "-v" verbose option, turbostat would print the turbo-limits for the four cases of 1 to 4 cores active. Expand that capability to cover the cases of turbo opportunities with up to 16 cores active. Note that not all hardware platforms supply this information, and that sometimes a valid limit may be specified for a core which is not actually present. Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21 12:01:31 +08:00
if (verbose > 1)
fprintf(stderr, "MSR_NEHALEM_PLATFORM_INFO: 0x%llx\n", msr);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
ratio = (msr >> 40) & 0xFF;
fprintf(stderr, "%d * %.0f = %.0f MHz max efficiency\n",
ratio, bclk, ratio * bclk);
ratio = (msr >> 8) & 0xFF;
fprintf(stderr, "%d * %.0f = %.0f MHz TSC frequency\n",
ratio, bclk, ratio * bclk);
tools/power turbostat: print more turbo-limit information The "turbo-limit" is the maximum opportunistic processor speed, assuming no electrical or thermal constraints. For a given processor, the turbo-limit varies, depending on the number of active cores. Generally, there is more opportunity when fewer cores are active. Under the "-v" verbose option, turbostat would print the turbo-limits for the four cases of 1 to 4 cores active. Expand that capability to cover the cases of turbo opportunities with up to 16 cores active. Note that not all hardware platforms supply this information, and that sometimes a valid limit may be specified for a core which is not actually present. Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21 12:01:31 +08:00
if (!do_ivt_turbo_ratio_limit)
goto print_nhm_turbo_ratio_limits;
get_msr(0, MSR_IVT_TURBO_RATIO_LIMIT, &msr);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (verbose > 1)
tools/power turbostat: print more turbo-limit information The "turbo-limit" is the maximum opportunistic processor speed, assuming no electrical or thermal constraints. For a given processor, the turbo-limit varies, depending on the number of active cores. Generally, there is more opportunity when fewer cores are active. Under the "-v" verbose option, turbostat would print the turbo-limits for the four cases of 1 to 4 cores active. Expand that capability to cover the cases of turbo opportunities with up to 16 cores active. Note that not all hardware platforms supply this information, and that sometimes a valid limit may be specified for a core which is not actually present. Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21 12:01:31 +08:00
fprintf(stderr, "MSR_IVT_TURBO_RATIO_LIMIT: 0x%llx\n", msr);
ratio = (msr >> 56) & 0xFF;
if (ratio)
fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 16 active cores\n",
ratio, bclk, ratio * bclk);
ratio = (msr >> 48) & 0xFF;
if (ratio)
fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 15 active cores\n",
ratio, bclk, ratio * bclk);
ratio = (msr >> 40) & 0xFF;
if (ratio)
fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 14 active cores\n",
ratio, bclk, ratio * bclk);
ratio = (msr >> 32) & 0xFF;
if (ratio)
fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 13 active cores\n",
ratio, bclk, ratio * bclk);
ratio = (msr >> 24) & 0xFF;
if (ratio)
fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 12 active cores\n",
ratio, bclk, ratio * bclk);
ratio = (msr >> 16) & 0xFF;
if (ratio)
fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 11 active cores\n",
ratio, bclk, ratio * bclk);
ratio = (msr >> 8) & 0xFF;
if (ratio)
fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 10 active cores\n",
ratio, bclk, ratio * bclk);
ratio = (msr >> 0) & 0xFF;
if (ratio)
fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 9 active cores\n",
ratio, bclk, ratio * bclk);
print_nhm_turbo_ratio_limits:
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (!do_nehalem_turbo_ratio_limit)
return;
tools turbostat: harden against cpu online/offline Sometimes users have turbostat running in interval mode when they take processors offline/online. Previously, turbostat would survive, but not gracefully. Tighten up the error checking so turbostat notices changesn sooner, and print just 1 line on change: turbostat: re-initialized with num_cpus %d Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 10:19:58 +08:00
get_msr(0, MSR_NEHALEM_TURBO_RATIO_LIMIT, &msr);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power turbostat: print more turbo-limit information The "turbo-limit" is the maximum opportunistic processor speed, assuming no electrical or thermal constraints. For a given processor, the turbo-limit varies, depending on the number of active cores. Generally, there is more opportunity when fewer cores are active. Under the "-v" verbose option, turbostat would print the turbo-limits for the four cases of 1 to 4 cores active. Expand that capability to cover the cases of turbo opportunities with up to 16 cores active. Note that not all hardware platforms supply this information, and that sometimes a valid limit may be specified for a core which is not actually present. Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21 12:01:31 +08:00
if (verbose > 1)
fprintf(stderr, "MSR_NEHALEM_TURBO_RATIO_LIMIT: 0x%llx\n", msr);
ratio = (msr >> 56) & 0xFF;
if (ratio)
fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 8 active cores\n",
ratio, bclk, ratio * bclk);
ratio = (msr >> 48) & 0xFF;
if (ratio)
fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 7 active cores\n",
ratio, bclk, ratio * bclk);
ratio = (msr >> 40) & 0xFF;
if (ratio)
fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 6 active cores\n",
ratio, bclk, ratio * bclk);
ratio = (msr >> 32) & 0xFF;
if (ratio)
fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 5 active cores\n",
ratio, bclk, ratio * bclk);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
ratio = (msr >> 24) & 0xFF;
if (ratio)
fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 4 active cores\n",
ratio, bclk, ratio * bclk);
ratio = (msr >> 16) & 0xFF;
if (ratio)
fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 3 active cores\n",
ratio, bclk, ratio * bclk);
ratio = (msr >> 8) & 0xFF;
if (ratio)
fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 2 active cores\n",
ratio, bclk, ratio * bclk);
ratio = (msr >> 0) & 0xFF;
if (ratio)
fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 1 active cores\n",
ratio, bclk, ratio * bclk);
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
void free_all_buffers(void)
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
{
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
CPU_FREE(cpu_present_set);
cpu_present_set = NULL;
cpu_present_set = 0;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
CPU_FREE(cpu_affinity_set);
cpu_affinity_set = NULL;
cpu_affinity_setsize = 0;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
free(thread_even);
free(core_even);
free(package_even);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
thread_even = NULL;
core_even = NULL;
package_even = NULL;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
free(thread_odd);
free(core_odd);
free(package_odd);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
thread_odd = NULL;
core_odd = NULL;
package_odd = NULL;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
free(output_buffer);
output_buffer = NULL;
outp = NULL;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
/*
* cpu_is_first_sibling_in_core(cpu)
* return 1 if given CPU is 1st HT sibling in the core
*/
int cpu_is_first_sibling_in_core(int cpu)
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
{
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
char path[64];
FILE *filep;
int first_cpu;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/thread_siblings_list", cpu);
filep = fopen(path, "r");
if (filep == NULL) {
perror(path);
exit(1);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
fscanf(filep, "%d", &first_cpu);
fclose(filep);
return (cpu == first_cpu);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
/*
* cpu_is_first_core_in_package(cpu)
* return 1 if given CPU is 1st core in package
*/
int cpu_is_first_core_in_package(int cpu)
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
{
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
char path[64];
FILE *filep;
int first_cpu;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/core_siblings_list", cpu);
filep = fopen(path, "r");
if (filep == NULL) {
perror(path);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
exit(1);
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
fscanf(filep, "%d", &first_cpu);
fclose(filep);
return (cpu == first_cpu);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
int get_physical_package_id(int cpu)
{
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
char path[80];
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
FILE *filep;
int pkg;
sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/physical_package_id", cpu);
filep = fopen(path, "r");
if (filep == NULL) {
perror(path);
exit(1);
}
fscanf(filep, "%d", &pkg);
fclose(filep);
return pkg;
}
int get_core_id(int cpu)
{
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
char path[80];
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
FILE *filep;
int core;
sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/core_id", cpu);
filep = fopen(path, "r");
if (filep == NULL) {
perror(path);
exit(1);
}
fscanf(filep, "%d", &core);
fclose(filep);
return core;
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
int get_num_ht_siblings(int cpu)
{
char path[80];
FILE *filep;
int sib1, sib2;
int matches;
char character;
sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/thread_siblings_list", cpu);
filep = fopen(path, "r");
if (filep == NULL) {
perror(path);
exit(1);
}
/*
* file format:
* if a pair of number with a character between: 2 siblings (eg. 1-2, or 1,4)
* otherwinse 1 sibling (self).
*/
matches = fscanf(filep, "%d%c%d\n", &sib1, &character, &sib2);
fclose(filep);
if (matches == 3)
return 2;
else
return 1;
}
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
/*
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
* run func(thread, core, package) in topology order
* skip non-present cpus
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
*/
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
int for_all_cpus_2(int (func)(struct thread_data *, struct core_data *,
struct pkg_data *, struct thread_data *, struct core_data *,
struct pkg_data *), struct thread_data *thread_base,
struct core_data *core_base, struct pkg_data *pkg_base,
struct thread_data *thread_base2, struct core_data *core_base2,
struct pkg_data *pkg_base2)
{
int retval, pkg_no, core_no, thread_no;
for (pkg_no = 0; pkg_no < topo.num_packages; ++pkg_no) {
for (core_no = 0; core_no < topo.num_cores_per_pkg; ++core_no) {
for (thread_no = 0; thread_no <
topo.num_threads_per_core; ++thread_no) {
struct thread_data *t, *t2;
struct core_data *c, *c2;
struct pkg_data *p, *p2;
t = GET_THREAD(thread_base, thread_no, core_no, pkg_no);
if (cpu_is_not_present(t->cpu_id))
continue;
t2 = GET_THREAD(thread_base2, thread_no, core_no, pkg_no);
c = GET_CORE(core_base, core_no, pkg_no);
c2 = GET_CORE(core_base2, core_no, pkg_no);
p = GET_PKG(pkg_base, pkg_no);
p2 = GET_PKG(pkg_base2, pkg_no);
retval = func(t, c, p, t2, c2, p2);
if (retval)
return retval;
}
}
}
return 0;
}
/*
* run func(cpu) on every cpu in /proc/stat
* return max_cpu number
*/
int for_all_proc_cpus(int (func)(int))
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
{
FILE *fp;
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
int cpu_num;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
int retval;
fp = fopen(proc_stat, "r");
if (fp == NULL) {
perror(proc_stat);
exit(1);
}
retval = fscanf(fp, "cpu %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n");
if (retval != 0) {
perror("/proc/stat format");
exit(1);
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
while (1) {
retval = fscanf(fp, "cpu%u %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n", &cpu_num);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (retval != 1)
break;
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
retval = func(cpu_num);
if (retval) {
fclose(fp);
return(retval);
}
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
fclose(fp);
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
return 0;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
void re_initialize(void)
{
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
free_all_buffers();
setup_all_buffers();
printf("turbostat: re-initialized with num_cpus %d\n", topo.num_cpus);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
/*
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
* count_cpus()
* remember the last one seen, it will be the max
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
*/
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
int count_cpus(int cpu)
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
{
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
if (topo.max_cpu_num < cpu)
topo.max_cpu_num = cpu;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
topo.num_cpus += 1;
return 0;
}
int mark_cpu_present(int cpu)
{
CPU_SET_S(cpu, cpu_present_setsize, cpu_present_set);
tools turbostat: harden against cpu online/offline Sometimes users have turbostat running in interval mode when they take processors offline/online. Previously, turbostat would survive, but not gracefully. Tighten up the error checking so turbostat notices changesn sooner, and print just 1 line on change: turbostat: re-initialized with num_cpus %d Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 10:19:58 +08:00
return 0;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
void turbostat_loop()
{
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
int retval;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
restart:
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
retval = for_all_cpus(get_counters, EVEN_COUNTERS);
if (retval) {
re_initialize();
goto restart;
}
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
gettimeofday(&tv_even, (struct timezone *)NULL);
while (1) {
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
if (for_all_proc_cpus(cpu_is_not_present)) {
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
re_initialize();
goto restart;
}
sleep(interval_sec);
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
retval = for_all_cpus(get_counters, ODD_COUNTERS);
if (retval) {
tools turbostat: harden against cpu online/offline Sometimes users have turbostat running in interval mode when they take processors offline/online. Previously, turbostat would survive, but not gracefully. Tighten up the error checking so turbostat notices changesn sooner, and print just 1 line on change: turbostat: re-initialized with num_cpus %d Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 10:19:58 +08:00
re_initialize();
goto restart;
}
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
gettimeofday(&tv_odd, (struct timezone *)NULL);
timersub(&tv_odd, &tv_even, &tv_delta);
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
for_all_cpus_2(delta_cpu, ODD_COUNTERS, EVEN_COUNTERS);
compute_average(EVEN_COUNTERS);
format_all_counters(EVEN_COUNTERS);
flush_stdout();
tools turbostat: harden against cpu online/offline Sometimes users have turbostat running in interval mode when they take processors offline/online. Previously, turbostat would survive, but not gracefully. Tighten up the error checking so turbostat notices changesn sooner, and print just 1 line on change: turbostat: re-initialized with num_cpus %d Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 10:19:58 +08:00
sleep(interval_sec);
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
retval = for_all_cpus(get_counters, EVEN_COUNTERS);
if (retval) {
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
re_initialize();
goto restart;
}
gettimeofday(&tv_even, (struct timezone *)NULL);
timersub(&tv_even, &tv_odd, &tv_delta);
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
for_all_cpus_2(delta_cpu, EVEN_COUNTERS, ODD_COUNTERS);
compute_average(ODD_COUNTERS);
format_all_counters(ODD_COUNTERS);
flush_stdout();
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
}
void check_dev_msr()
{
struct stat sb;
if (stat("/dev/cpu/0/msr", &sb)) {
fprintf(stderr, "no /dev/cpu/0/msr\n");
fprintf(stderr, "Try \"# modprobe msr\"\n");
exit(-5);
}
}
void check_super_user()
{
if (getuid() != 0) {
fprintf(stderr, "must be root\n");
exit(-6);
}
}
int has_nehalem_turbo_ratio_limit(unsigned int family, unsigned int model)
{
if (!genuine_intel)
return 0;
if (family != 6)
return 0;
switch (model) {
case 0x1A: /* Core i7, Xeon 5500 series - Bloomfield, Gainstown NHM-EP */
case 0x1E: /* Core i7 and i5 Processor - Clarksfield, Lynnfield, Jasper Forest */
case 0x1F: /* Core i7 and i5 Processor - Nehalem */
case 0x25: /* Westmere Client - Clarkdale, Arrandale */
case 0x2C: /* Westmere EP - Gulftown */
case 0x2A: /* SNB */
case 0x2D: /* SNB Xeon */
tools turbostat: recognize and run properly on IVB Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-18 16:32:01 +08:00
case 0x3A: /* IVB */
tools/power turbostat: run on IVB Xeon This fix is required to run on IVB Xeon, which previously had an incorrect cpuid model number listed. Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-27 06:11:31 +08:00
case 0x3E: /* IVB Xeon */
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
return 1;
case 0x2E: /* Nehalem-EX Xeon - Beckton */
case 0x2F: /* Westmere-EX Xeon - Eagleton */
default:
return 0;
}
}
tools/power turbostat: print more turbo-limit information The "turbo-limit" is the maximum opportunistic processor speed, assuming no electrical or thermal constraints. For a given processor, the turbo-limit varies, depending on the number of active cores. Generally, there is more opportunity when fewer cores are active. Under the "-v" verbose option, turbostat would print the turbo-limits for the four cases of 1 to 4 cores active. Expand that capability to cover the cases of turbo opportunities with up to 16 cores active. Note that not all hardware platforms supply this information, and that sometimes a valid limit may be specified for a core which is not actually present. Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21 12:01:31 +08:00
int has_ivt_turbo_ratio_limit(unsigned int family, unsigned int model)
{
if (!genuine_intel)
return 0;
if (family != 6)
return 0;
switch (model) {
case 0x3E: /* IVB Xeon */
return 1;
default:
return 0;
}
}
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
int is_snb(unsigned int family, unsigned int model)
{
if (!genuine_intel)
return 0;
switch (model) {
case 0x2A:
case 0x2D:
tools/power turbostat: fix IVB support Initial IVB support went into turbostat in Linux-3.1: 553575f1ae048aa44682b46b3c51929a0b3ad337 (tools turbostat: recognize and run properly on IVB) However, when running on IVB, turbostat would fail to report the new couters added with SNB, c7, pc2 and pc7. So in scenarios where these counters are non-zero on IVB, turbostat would report erroneous residencey results. In particular c7 time would be added to c1 time, since c1 time is calculated as "that which is left over". Also, turbostat reports MHz capabilities when passed the "-v" option, and it would incorrectly report 133MHz bclk instead of 100MHz bclk for IVB, which would inflate GHz reported with that option. This patch is a backport of a fix already included in turbostat v2. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 11:34:44 +08:00
case 0x3A: /* IVB */
tools/power turbostat: run on IVB Xeon This fix is required to run on IVB Xeon, which previously had an incorrect cpuid model number listed. Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-27 06:11:31 +08:00
case 0x3E: /* IVB Xeon */
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
return 1;
}
return 0;
}
double discover_bclk(unsigned int family, unsigned int model)
{
if (is_snb(family, model))
return 100.00;
else
return 133.33;
}
void check_cpuid()
{
unsigned int eax, ebx, ecx, edx, max_level;
unsigned int fms, family, model, stepping;
eax = ebx = ecx = edx = 0;
asm("cpuid" : "=a" (max_level), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (0));
if (ebx == 0x756e6547 && edx == 0x49656e69 && ecx == 0x6c65746e)
genuine_intel = 1;
if (verbose)
fprintf(stderr, "%.4s%.4s%.4s ",
(char *)&ebx, (char *)&edx, (char *)&ecx);
asm("cpuid" : "=a" (fms), "=c" (ecx), "=d" (edx) : "a" (1) : "ebx");
family = (fms >> 8) & 0xf;
model = (fms >> 4) & 0xf;
stepping = fms & 0xf;
if (family == 6 || family == 0xf)
model += ((fms >> 16) & 0xf) << 4;
if (verbose)
fprintf(stderr, "%d CPUID levels; family:model:stepping 0x%x:%x:%x (%d:%d:%d)\n",
max_level, family, model, stepping, family, model, stepping);
if (!(edx & (1 << 5))) {
fprintf(stderr, "CPUID: no MSR\n");
exit(1);
}
/*
* check max extended function levels of CPUID.
* This is needed to check for invariant TSC.
* This check is valid for both Intel and AMD.
*/
ebx = ecx = edx = 0;
asm("cpuid" : "=a" (max_level), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (0x80000000));
if (max_level < 0x80000007) {
fprintf(stderr, "CPUID: no invariant TSC (max_level 0x%x)\n", max_level);
exit(1);
}
/*
* Non-Stop TSC is advertised by CPUID.EAX=0x80000007: EDX.bit8
* this check is valid for both Intel and AMD
*/
asm("cpuid" : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (0x80000007));
tools: turbostat: fix bitwise and operand bug could cause false positive on indicating presence of invarient TSC or APERF support. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-21 22:11:19 +08:00
has_invariant_tsc = edx & (1 << 8);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (!has_invariant_tsc) {
fprintf(stderr, "No invariant TSC\n");
exit(1);
}
/*
* APERF/MPERF is advertised by CPUID.EAX=0x6: ECX.bit0
* this check is valid for both Intel and AMD
*/
asm("cpuid" : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (0x6));
tools: turbostat: fix bitwise and operand bug could cause false positive on indicating presence of invarient TSC or APERF support. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-21 22:11:19 +08:00
has_aperf = ecx & (1 << 0);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (!has_aperf) {
fprintf(stderr, "No APERF MSR\n");
exit(1);
}
do_nehalem_platform_info = genuine_intel && has_invariant_tsc;
do_nhm_cstates = genuine_intel; /* all Intel w/ non-stop TSC have NHM counters */
do_snb_cstates = is_snb(family, model);
bclk = discover_bclk(family, model);
do_nehalem_turbo_ratio_limit = has_nehalem_turbo_ratio_limit(family, model);
tools/power turbostat: print more turbo-limit information The "turbo-limit" is the maximum opportunistic processor speed, assuming no electrical or thermal constraints. For a given processor, the turbo-limit varies, depending on the number of active cores. Generally, there is more opportunity when fewer cores are active. Under the "-v" verbose option, turbostat would print the turbo-limits for the four cases of 1 to 4 cores active. Expand that capability to cover the cases of turbo opportunities with up to 16 cores active. Note that not all hardware platforms supply this information, and that sometimes a valid limit may be specified for a core which is not actually present. Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21 12:01:31 +08:00
do_ivt_turbo_ratio_limit = has_ivt_turbo_ratio_limit(family, model);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
void usage()
{
tools/power turbostat: add [-m MSR#] option -m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 11:45:46 +08:00
fprintf(stderr, "%s: [-v] [-m msr#] [-M MSR#] [-i interval_sec | command ...]\n",
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
progname);
exit(1);
}
/*
* in /dev/cpu/ return success for names that are numbers
* ie. filter out ".", "..", "microcode".
*/
int dir_filter(const struct dirent *dirp)
{
if (isdigit(dirp->d_name[0]))
return 1;
else
return 0;
}
int open_dev_cpu_msr(int dummy1)
{
return 0;
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
void topology_probe()
{
int i;
int max_core_id = 0;
int max_package_id = 0;
int max_siblings = 0;
struct cpu_topology {
int core_id;
int physical_package_id;
} *cpus;
/* Initialize num_cpus, max_cpu_num */
topo.num_cpus = 0;
topo.max_cpu_num = 0;
for_all_proc_cpus(count_cpus);
if (!summary_only && topo.num_cpus > 1)
show_cpu = 1;
if (verbose > 1)
fprintf(stderr, "num_cpus %d max_cpu_num %d\n", topo.num_cpus, topo.max_cpu_num);
cpus = calloc(1, (topo.max_cpu_num + 1) * sizeof(struct cpu_topology));
if (cpus == NULL) {
perror("calloc cpus");
exit(1);
}
/*
* Allocate and initialize cpu_present_set
*/
cpu_present_set = CPU_ALLOC((topo.max_cpu_num + 1));
if (cpu_present_set == NULL) {
perror("CPU_ALLOC");
exit(3);
}
cpu_present_setsize = CPU_ALLOC_SIZE((topo.max_cpu_num + 1));
CPU_ZERO_S(cpu_present_setsize, cpu_present_set);
for_all_proc_cpus(mark_cpu_present);
/*
* Allocate and initialize cpu_affinity_set
*/
cpu_affinity_set = CPU_ALLOC((topo.max_cpu_num + 1));
if (cpu_affinity_set == NULL) {
perror("CPU_ALLOC");
exit(3);
}
cpu_affinity_setsize = CPU_ALLOC_SIZE((topo.max_cpu_num + 1));
CPU_ZERO_S(cpu_affinity_setsize, cpu_affinity_set);
/*
* For online cpus
* find max_core_id, max_package_id
*/
for (i = 0; i <= topo.max_cpu_num; ++i) {
int siblings;
if (cpu_is_not_present(i)) {
if (verbose > 1)
fprintf(stderr, "cpu%d NOT PRESENT\n", i);
continue;
}
cpus[i].core_id = get_core_id(i);
if (cpus[i].core_id > max_core_id)
max_core_id = cpus[i].core_id;
cpus[i].physical_package_id = get_physical_package_id(i);
if (cpus[i].physical_package_id > max_package_id)
max_package_id = cpus[i].physical_package_id;
siblings = get_num_ht_siblings(i);
if (siblings > max_siblings)
max_siblings = siblings;
if (verbose > 1)
fprintf(stderr, "cpu %d pkg %d core %d\n",
i, cpus[i].physical_package_id, cpus[i].core_id);
}
topo.num_cores_per_pkg = max_core_id + 1;
if (verbose > 1)
fprintf(stderr, "max_core_id %d, sizing for %d cores per package\n",
max_core_id, topo.num_cores_per_pkg);
if (!summary_only && topo.num_cores_per_pkg > 1)
show_core = 1;
topo.num_packages = max_package_id + 1;
if (verbose > 1)
fprintf(stderr, "max_package_id %d, sizing for %d packages\n",
max_package_id, topo.num_packages);
if (!summary_only && topo.num_packages > 1)
show_pkg = 1;
topo.num_threads_per_core = max_siblings;
if (verbose > 1)
fprintf(stderr, "max_siblings %d\n", max_siblings);
free(cpus);
}
void
allocate_counters(struct thread_data **t, struct core_data **c, struct pkg_data **p)
{
int i;
*t = calloc(topo.num_threads_per_core * topo.num_cores_per_pkg *
topo.num_packages, sizeof(struct thread_data));
if (*t == NULL)
goto error;
for (i = 0; i < topo.num_threads_per_core *
topo.num_cores_per_pkg * topo.num_packages; i++)
(*t)[i].cpu_id = -1;
*c = calloc(topo.num_cores_per_pkg * topo.num_packages,
sizeof(struct core_data));
if (*c == NULL)
goto error;
for (i = 0; i < topo.num_cores_per_pkg * topo.num_packages; i++)
(*c)[i].core_id = -1;
*p = calloc(topo.num_packages, sizeof(struct pkg_data));
if (*p == NULL)
goto error;
for (i = 0; i < topo.num_packages; i++)
(*p)[i].package_id = i;
return;
error:
perror("calloc counters");
exit(1);
}
/*
* init_counter()
*
* set cpu_id, core_num, pkg_num
* set FIRST_THREAD_IN_CORE and FIRST_CORE_IN_PACKAGE
*
* increment topo.num_cores when 1st core in pkg seen
*/
void init_counter(struct thread_data *thread_base, struct core_data *core_base,
struct pkg_data *pkg_base, int thread_num, int core_num,
int pkg_num, int cpu_id)
{
struct thread_data *t;
struct core_data *c;
struct pkg_data *p;
t = GET_THREAD(thread_base, thread_num, core_num, pkg_num);
c = GET_CORE(core_base, core_num, pkg_num);
p = GET_PKG(pkg_base, pkg_num);
t->cpu_id = cpu_id;
if (thread_num == 0) {
t->flags |= CPU_IS_FIRST_THREAD_IN_CORE;
if (cpu_is_first_core_in_package(cpu_id))
t->flags |= CPU_IS_FIRST_CORE_IN_PACKAGE;
}
c->core_id = core_num;
p->package_id = pkg_num;
}
int initialize_counters(int cpu_id)
{
int my_thread_id, my_core_id, my_package_id;
my_package_id = get_physical_package_id(cpu_id);
my_core_id = get_core_id(cpu_id);
if (cpu_is_first_sibling_in_core(cpu_id)) {
my_thread_id = 0;
topo.num_cores++;
} else {
my_thread_id = 1;
}
init_counter(EVEN_COUNTERS, my_thread_id, my_core_id, my_package_id, cpu_id);
init_counter(ODD_COUNTERS, my_thread_id, my_core_id, my_package_id, cpu_id);
return 0;
}
void allocate_output_buffer()
{
output_buffer = calloc(1, (1 + topo.num_cpus) * 128);
outp = output_buffer;
if (outp == NULL) {
perror("calloc");
exit(-1);
}
}
void setup_all_buffers(void)
{
topology_probe();
allocate_counters(&thread_even, &core_even, &package_even);
allocate_counters(&thread_odd, &core_odd, &package_odd);
allocate_output_buffer();
for_all_proc_cpus(initialize_counters);
}
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
void turbostat_init()
{
check_cpuid();
check_dev_msr();
check_super_user();
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
setup_all_buffers();
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (verbose)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
print_verbose_header();
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
}
int fork_it(char **argv)
{
pid_t child_pid;
tools/power turbostat: fix un-intended affinity of forked program Linux 3.4 included a modification to turbostat to lower cross-call overhead by using scheduler affinity: 15aaa34654831e98dd76f7738b6c7f5d05a66430 (tools turbostat: reduce measurement overhead due to IPIs) In the use-case where turbostat forks a child program, that change had the un-intended side-effect of binding the child to the last cpu in the system. This change removed the binding before forking the child. This is a back-port of a fix already included in turbostat v2. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 11:24:00 +08:00
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
for_all_cpus(get_counters, EVEN_COUNTERS);
/* clear affinity side-effect of get_counters() */
sched_setaffinity(0, cpu_present_setsize, cpu_present_set);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
gettimeofday(&tv_even, (struct timezone *)NULL);
child_pid = fork();
if (!child_pid) {
/* child */
execvp(argv[0], argv);
} else {
int status;
/* parent */
if (child_pid == -1) {
perror("fork");
exit(1);
}
signal(SIGINT, SIG_IGN);
signal(SIGQUIT, SIG_IGN);
if (waitpid(child_pid, &status, 0) == -1) {
perror("wait");
exit(1);
}
}
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
/*
* n.b. fork_it() does not check for errors from for_all_cpus()
* because re-starting is problematic when forking
*/
for_all_cpus(get_counters, ODD_COUNTERS);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
gettimeofday(&tv_odd, (struct timezone *)NULL);
timersub(&tv_odd, &tv_even, &tv_delta);
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
for_all_cpus_2(delta_cpu, ODD_COUNTERS, EVEN_COUNTERS);
compute_average(EVEN_COUNTERS);
format_all_counters(EVEN_COUNTERS);
flush_stderr();
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
treewide: remove extra semicolons Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-09 10:49:08 +08:00
fprintf(stderr, "%.6f sec\n", tv_delta.tv_sec + tv_delta.tv_usec/1000000.0);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
return 0;
}
void cmdline(int argc, char **argv)
{
int opt;
progname = argv[0];
tools/power turbostat: add [-m MSR#] option -m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 11:45:46 +08:00
while ((opt = getopt(argc, argv, "+cpsvi:m:M:")) != -1) {
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
switch (opt) {
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
case 'c':
show_core_only++;
break;
case 'p':
show_pkg_only++;
break;
tools turbostat: add summary option turbostat -s cuts down on the amount of output, per user request. also treak some output whitespace and the man page. Signed-off-by: Len Brown <len.brown@intel.com>
2012-02-07 07:37:16 +08:00
case 's':
summary_only++;
break;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
case 'v':
verbose++;
break;
case 'i':
interval_sec = atoi(optarg);
break;
tools/power turbostat: add [-m MSR#] option -m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 11:45:46 +08:00
case 'm':
sscanf(optarg, "%x", &extra_msr_offset32);
if (verbose > 1)
fprintf(stderr, "msr 0x%X\n", extra_msr_offset32);
break;
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
case 'M':
tools/power turbostat: add [-m MSR#] option -m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 11:45:46 +08:00
sscanf(optarg, "%x", &extra_msr_offset64);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
if (verbose > 1)
tools/power turbostat: add [-m MSR#] option -m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22 11:45:46 +08:00
fprintf(stderr, "MSR 0x%X\n", extra_msr_offset64);
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
break;
default:
usage();
}
}
}
int main(int argc, char **argv)
{
cmdline(argc, argv);
if (verbose > 1)
tools/power: turbostat v2 - re-write for efficiency Measuring large profoundly-idle configurations requires turbostat to be more lightweight. Otherwise, the operation of turbostat itself can interfere with the measurements. This re-write makes turbostat topology aware. Hardware is accessed in "topology order". Redundant hardware accesses are deleted. Redundant output is deleted. Also, output is buffered and local RDTSC use replaces remote MSR access for TSC. From a feature point of view, the output looks different since redundant figures are absent. Also, there are now -c and -p options -- to restrict output to the 1st thread in each core, and the 1st thread in each package, respectively. This is helpful to reduce output on big systems, where more detail than the "-s" system summary is desired. Finally, periodic mode output is now on stdout, not stderr. Turbostat v2 is also slightly more robust in handling run-time CPU online/offline events, as it now checks the actual map of on-line cpus rather than just the total number of on-line cpus. Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 12:56:40 +08:00
fprintf(stderr, "turbostat v2.0 May 16, 2012"
tools: create power/x86/turbostat turbostat is a Linux tool to observe proper operation of Intel(R) Turbo Boost Technology. turbostat displays the actual processor frequency on x86 processors that include APERF and MPERF MSRs. Note that turbostat is of limited utility on Linux kernels 2.6.29 and older, as acpi_cpufreq cleared APERF/MPERF up through that release. On Intel Core i3/i5/i7 (Nehalem) and newer processors, turbostat also displays residency in idle power saving states, which are necessary for diagnosing any cpuidle issues that may have an effect on turbo-mode. See the turbostat.8 man page for example usage. Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 11:53:03 +08:00
" - Len Brown <lenb@kernel.org>\n");
turbostat_init();
/*
* if any params left, it must be a command to fork
*/
if (argc - optind)
return fork_it(argv + optind);
else
turbostat_loop();
return 0;
}