linux/arch/s390/mm/pageattr.c

387 lines
9.0 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright IBM Corp. 2011
* Author(s): Jan Glauber <jang@linux.vnet.ibm.com>
*/
#include <linux/hugetlb.h>
#include <linux/mm.h>
#include <asm/cacheflush.h>
#include <asm/facility.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
#include <asm/set_memory.h>
static inline unsigned long sske_frame(unsigned long addr, unsigned char skey)
{
asm volatile(".insn rrf,0xb22b0000,%[skey],%[addr],1,0"
: [addr] "+a" (addr) : [skey] "d" (skey));
return addr;
}
void __storage_key_init_range(unsigned long start, unsigned long end)
{
unsigned long boundary, size;
while (start < end) {
if (MACHINE_HAS_EDAT1) {
/* set storage keys for a 1MB frame */
size = 1UL << 20;
boundary = (start + size) & ~(size - 1);
if (boundary <= end) {
do {
start = sske_frame(start, PAGE_DEFAULT_KEY);
} while (start < boundary);
continue;
}
}
page_set_storage_key(start, PAGE_DEFAULT_KEY, 1);
start += PAGE_SIZE;
}
}
#ifdef CONFIG_PROC_FS
atomic_long_t direct_pages_count[PG_DIRECT_MAP_MAX];
void arch_report_meminfo(struct seq_file *m)
{
seq_printf(m, "DirectMap4k: %8lu kB\n",
atomic_long_read(&direct_pages_count[PG_DIRECT_MAP_4K]) << 2);
seq_printf(m, "DirectMap1M: %8lu kB\n",
atomic_long_read(&direct_pages_count[PG_DIRECT_MAP_1M]) << 10);
seq_printf(m, "DirectMap2G: %8lu kB\n",
atomic_long_read(&direct_pages_count[PG_DIRECT_MAP_2G]) << 21);
}
#endif /* CONFIG_PROC_FS */
static void pgt_set(unsigned long *old, unsigned long new, unsigned long addr,
unsigned long dtt)
{
unsigned long table, mask;
mask = 0;
if (MACHINE_HAS_EDAT2) {
switch (dtt) {
case CRDTE_DTT_REGION3:
mask = ~(PTRS_PER_PUD * sizeof(pud_t) - 1);
break;
case CRDTE_DTT_SEGMENT:
mask = ~(PTRS_PER_PMD * sizeof(pmd_t) - 1);
break;
case CRDTE_DTT_PAGE:
mask = ~(PTRS_PER_PTE * sizeof(pte_t) - 1);
break;
}
table = (unsigned long)old & mask;
crdte(*old, new, table, dtt, addr, S390_lowcore.kernel_asce);
} else if (MACHINE_HAS_IDTE) {
cspg(old, *old, new);
} else {
csp((unsigned int *)old + 1, *old, new);
}
}
static int walk_pte_level(pmd_t *pmdp, unsigned long addr, unsigned long end,
unsigned long flags)
{
pte_t *ptep, new;
ptep = pte_offset(pmdp, addr);
do {
new = *ptep;
if (pte_none(new))
return -EINVAL;
if (flags & SET_MEMORY_RO)
new = pte_wrprotect(new);
else if (flags & SET_MEMORY_RW)
new = pte_mkwrite(pte_mkdirty(new));
if (flags & SET_MEMORY_NX)
pte_val(new) |= _PAGE_NOEXEC;
else if (flags & SET_MEMORY_X)
pte_val(new) &= ~_PAGE_NOEXEC;
pgt_set((unsigned long *)ptep, pte_val(new), addr, CRDTE_DTT_PAGE);
ptep++;
addr += PAGE_SIZE;
cond_resched();
} while (addr < end);
return 0;
}
static int split_pmd_page(pmd_t *pmdp, unsigned long addr)
{
unsigned long pte_addr, prot;
pte_t *pt_dir, *ptep;
pmd_t new;
int i, ro, nx;
pt_dir = vmem_pte_alloc();
if (!pt_dir)
return -ENOMEM;
pte_addr = pmd_pfn(*pmdp) << PAGE_SHIFT;
ro = !!(pmd_val(*pmdp) & _SEGMENT_ENTRY_PROTECT);
nx = !!(pmd_val(*pmdp) & _SEGMENT_ENTRY_NOEXEC);
prot = pgprot_val(ro ? PAGE_KERNEL_RO : PAGE_KERNEL);
if (!nx)
prot &= ~_PAGE_NOEXEC;
ptep = pt_dir;
for (i = 0; i < PTRS_PER_PTE; i++) {
pte_val(*ptep) = pte_addr | prot;
pte_addr += PAGE_SIZE;
ptep++;
}
pmd_val(new) = __pa(pt_dir) | _SEGMENT_ENTRY;
pgt_set((unsigned long *)pmdp, pmd_val(new), addr, CRDTE_DTT_SEGMENT);
update_page_count(PG_DIRECT_MAP_4K, PTRS_PER_PTE);
update_page_count(PG_DIRECT_MAP_1M, -1);
return 0;
}
static void modify_pmd_page(pmd_t *pmdp, unsigned long addr,
unsigned long flags)
{
pmd_t new = *pmdp;
if (flags & SET_MEMORY_RO)
new = pmd_wrprotect(new);
else if (flags & SET_MEMORY_RW)
new = pmd_mkwrite(pmd_mkdirty(new));
if (flags & SET_MEMORY_NX)
pmd_val(new) |= _SEGMENT_ENTRY_NOEXEC;
else if (flags & SET_MEMORY_X)
pmd_val(new) &= ~_SEGMENT_ENTRY_NOEXEC;
pgt_set((unsigned long *)pmdp, pmd_val(new), addr, CRDTE_DTT_SEGMENT);
}
static int walk_pmd_level(pud_t *pudp, unsigned long addr, unsigned long end,
unsigned long flags)
{
unsigned long next;
pmd_t *pmdp;
int rc = 0;
pmdp = pmd_offset(pudp, addr);
do {
if (pmd_none(*pmdp))
return -EINVAL;
next = pmd_addr_end(addr, end);
if (pmd_large(*pmdp)) {
if (addr & ~PMD_MASK || addr + PMD_SIZE > next) {
rc = split_pmd_page(pmdp, addr);
if (rc)
return rc;
continue;
}
modify_pmd_page(pmdp, addr, flags);
} else {
rc = walk_pte_level(pmdp, addr, next, flags);
if (rc)
return rc;
}
pmdp++;
addr = next;
cond_resched();
} while (addr < end);
return rc;
}
static int split_pud_page(pud_t *pudp, unsigned long addr)
{
unsigned long pmd_addr, prot;
pmd_t *pm_dir, *pmdp;
pud_t new;
int i, ro, nx;
pm_dir = vmem_crst_alloc(_SEGMENT_ENTRY_EMPTY);
if (!pm_dir)
return -ENOMEM;
pmd_addr = pud_pfn(*pudp) << PAGE_SHIFT;
ro = !!(pud_val(*pudp) & _REGION_ENTRY_PROTECT);
nx = !!(pud_val(*pudp) & _REGION_ENTRY_NOEXEC);
prot = pgprot_val(ro ? SEGMENT_KERNEL_RO : SEGMENT_KERNEL);
if (!nx)
prot &= ~_SEGMENT_ENTRY_NOEXEC;
pmdp = pm_dir;
for (i = 0; i < PTRS_PER_PMD; i++) {
pmd_val(*pmdp) = pmd_addr | prot;
pmd_addr += PMD_SIZE;
pmdp++;
}
pud_val(new) = __pa(pm_dir) | _REGION3_ENTRY;
pgt_set((unsigned long *)pudp, pud_val(new), addr, CRDTE_DTT_REGION3);
update_page_count(PG_DIRECT_MAP_1M, PTRS_PER_PMD);
update_page_count(PG_DIRECT_MAP_2G, -1);
return 0;
}
static void modify_pud_page(pud_t *pudp, unsigned long addr,
unsigned long flags)
{
pud_t new = *pudp;
if (flags & SET_MEMORY_RO)
new = pud_wrprotect(new);
else if (flags & SET_MEMORY_RW)
new = pud_mkwrite(pud_mkdirty(new));
if (flags & SET_MEMORY_NX)
pud_val(new) |= _REGION_ENTRY_NOEXEC;
else if (flags & SET_MEMORY_X)
pud_val(new) &= ~_REGION_ENTRY_NOEXEC;
pgt_set((unsigned long *)pudp, pud_val(new), addr, CRDTE_DTT_REGION3);
}
static int walk_pud_level(p4d_t *p4d, unsigned long addr, unsigned long end,
unsigned long flags)
{
unsigned long next;
pud_t *pudp;
int rc = 0;
pudp = pud_offset(p4d, addr);
do {
if (pud_none(*pudp))
return -EINVAL;
next = pud_addr_end(addr, end);
if (pud_large(*pudp)) {
if (addr & ~PUD_MASK || addr + PUD_SIZE > next) {
rc = split_pud_page(pudp, addr);
if (rc)
break;
continue;
}
modify_pud_page(pudp, addr, flags);
} else {
rc = walk_pmd_level(pudp, addr, next, flags);
}
pudp++;
addr = next;
cond_resched();
} while (addr < end && !rc);
return rc;
}
static int walk_p4d_level(pgd_t *pgd, unsigned long addr, unsigned long end,
unsigned long flags)
{
unsigned long next;
p4d_t *p4dp;
int rc = 0;
p4dp = p4d_offset(pgd, addr);
do {
if (p4d_none(*p4dp))
return -EINVAL;
next = p4d_addr_end(addr, end);
rc = walk_pud_level(p4dp, addr, next, flags);
p4dp++;
addr = next;
cond_resched();
} while (addr < end && !rc);
return rc;
}
static DEFINE_MUTEX(cpa_mutex);
static int change_page_attr(unsigned long addr, unsigned long end,
unsigned long flags)
{
unsigned long next;
int rc = -EINVAL;
pgd_t *pgdp;
s390/pageattr: handle numpages parameter correctly Both set_memory_ro() and set_memory_rw() will modify the page attributes of at least one page, even if the numpages parameter is zero. The author expected that calling these functions with numpages == zero would never happen. However with the new 444d13ff10fb ("modules: add ro_after_init support") feature this happens frequently. Therefore do the right thing and make these two functions return gracefully if nothing should be done. Fixes crashes on module load like this one: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 000003ff80008000 TEID: 000003ff80008407 Fault in home space mode while using kernel ASCE. AS:0000000000d18007 R3:00000001e6aa4007 S:00000001e6a10800 P:00000001e34ee21d Oops: 0004 ilc:3 [#1] SMP Modules linked in: x_tables CPU: 10 PID: 1 Comm: systemd Not tainted 4.7.0-11895-g3fa9045 #4 Hardware name: IBM 2964 N96 703 (LPAR) task: 00000001e9118000 task.stack: 00000001e9120000 Krnl PSW : 0704e00180000000 00000000005677f8 (rb_erase+0xf0/0x4d0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 000003ff80008b20 000003ff80008b20 000003ff80008b70 0000000000b9d608 000003ff80008b20 0000000000000000 00000001e9123e88 000003ff80008950 00000001e485ab40 000003ff00000000 000003ff80008b00 00000001e4858480 0000000100000000 000003ff80008b68 00000000001d5998 00000001e9123c28 Krnl Code: 00000000005677e8: ec1801c3007c cgij %r1,0,8,567b6e 00000000005677ee: e32010100020 cg %r2,16(%r1) #00000000005677f4: a78401c2 brc 8,567b78 >00000000005677f8: e35010080024 stg %r5,8(%r1) 00000000005677fe: ec5801af007c cgij %r5,0,8,567b5c 0000000000567804: e30050000024 stg %r0,0(%r5) 000000000056780a: ebacf0680004 lmg %r10,%r12,104(%r15) 0000000000567810: 07fe bcr 15,%r14 Call Trace: ([<000003ff80008900>] __this_module+0x0/0xffffffffffffd700 [x_tables]) ([<0000000000264fd4>] do_init_module+0x12c/0x220) ([<00000000001da14a>] load_module+0x24e2/0x2b10) ([<00000000001da976>] SyS_finit_module+0xbe/0xd8) ([<0000000000803b26>] system_call+0xd6/0x264) Last Breaking-Event-Address: [<000000000056771a>] rb_erase+0x12/0x4d0 Kernel panic - not syncing: Fatal exception: panic_on_oops Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Reported-and-tested-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Fixes: e8a97e42dc98 ("s390/pageattr: allow kernel page table splitting") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-09 18:26:28 +08:00
if (addr == end)
return 0;
if (end >= MODULES_END)
return -EINVAL;
mutex_lock(&cpa_mutex);
pgdp = pgd_offset_k(addr);
do {
if (pgd_none(*pgdp))
break;
next = pgd_addr_end(addr, end);
rc = walk_p4d_level(pgdp, addr, next, flags);
if (rc)
break;
cond_resched();
} while (pgdp++, addr = next, addr < end && !rc);
mutex_unlock(&cpa_mutex);
return rc;
}
int __set_memory(unsigned long addr, int numpages, unsigned long flags)
{
if (!MACHINE_HAS_NX)
flags &= ~(SET_MEMORY_NX | SET_MEMORY_X);
if (!flags)
return 0;
addr &= PAGE_MASK;
return change_page_attr(addr, addr + numpages * PAGE_SIZE, flags);
}
#ifdef CONFIG_DEBUG_PAGEALLOC
static void ipte_range(pte_t *pte, unsigned long address, int nr)
{
int i;
if (test_facility(13)) {
__ptep_ipte_range(address, nr - 1, pte, IPTE_GLOBAL);
return;
}
for (i = 0; i < nr; i++) {
__ptep_ipte(address, pte, 0, 0, IPTE_GLOBAL);
address += PAGE_SIZE;
pte++;
}
}
void __kernel_map_pages(struct page *page, int numpages, int enable)
{
unsigned long address;
int nr, i, j;
pgd_t *pgd;
p4d_t *p4d;
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
for (i = 0; i < numpages;) {
address = page_to_phys(page + i);
pgd = pgd_offset_k(address);
p4d = p4d_offset(pgd, address);
pud = pud_offset(p4d, address);
pmd = pmd_offset(pud, address);
pte = pte_offset_kernel(pmd, address);
nr = (unsigned long)pte >> ilog2(sizeof(long));
nr = PTRS_PER_PTE - (nr & (PTRS_PER_PTE - 1));
nr = min(numpages - i, nr);
if (enable) {
for (j = 0; j < nr; j++) {
pte_val(*pte) &= ~_PAGE_INVALID;
address += PAGE_SIZE;
pte++;
}
} else {
ipte_range(pte, address, nr);
}
i += nr;
}
}
#ifdef CONFIG_HIBERNATION
bool kernel_page_present(struct page *page)
{
unsigned long addr;
int cc;
addr = page_to_phys(page);
asm volatile(
" lra %1,0(%1)\n"
" ipm %0\n"
" srl %0,28"
: "=d" (cc), "+a" (addr) : : "cc");
return cc == 0;
}
#endif /* CONFIG_HIBERNATION */
#endif /* CONFIG_DEBUG_PAGEALLOC */