linux/arch/um/drivers/hostaudio_kern.c

359 lines
7.6 KiB
C
Raw Normal View History

/*
* Copyright (C) 2002 Steve Schmidtke
* Licensed under the GPL
*/
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/sound.h>
#include <linux/soundcard.h>
#include <linux/mutex.h>
#include <asm/uaccess.h>
#include <init.h>
#include <os.h>
struct hostaudio_state {
int fd;
};
struct hostmixer_state {
int fd;
};
#define HOSTAUDIO_DEV_DSP "/dev/sound/dsp"
#define HOSTAUDIO_DEV_MIXER "/dev/sound/mixer"
/*
* Changed either at boot time or module load time. At boot, this is
* single-threaded; at module load, multiple modules would each have
* their own copy of these variables.
*/
static char *dsp = HOSTAUDIO_DEV_DSP;
static char *mixer = HOSTAUDIO_DEV_MIXER;
#define DSP_HELP \
" This is used to specify the host dsp device to the hostaudio driver.\n" \
" The default is \"" HOSTAUDIO_DEV_DSP "\".\n\n"
#define MIXER_HELP \
" This is used to specify the host mixer device to the hostaudio driver.\n"\
" The default is \"" HOSTAUDIO_DEV_MIXER "\".\n\n"
module_param(dsp, charp, 0644);
MODULE_PARM_DESC(dsp, DSP_HELP);
module_param(mixer, charp, 0644);
MODULE_PARM_DESC(mixer, MIXER_HELP);
#ifndef MODULE
static int set_dsp(char *name, int *add)
{
dsp = name;
return 0;
}
__uml_setup("dsp=", set_dsp, "dsp=<dsp device>\n" DSP_HELP);
static int set_mixer(char *name, int *add)
{
mixer = name;
return 0;
}
__uml_setup("mixer=", set_mixer, "mixer=<mixer device>\n" MIXER_HELP);
#endif
static DEFINE_MUTEX(hostaudio_mutex);
/* /dev/dsp file operations */
static ssize_t hostaudio_read(struct file *file, char __user *buffer,
size_t count, loff_t *ppos)
{
struct hostaudio_state *state = file->private_data;
void *kbuf;
int err;
#ifdef DEBUG
printk(KERN_DEBUG "hostaudio: read called, count = %d\n", count);
#endif
kbuf = kmalloc(count, GFP_KERNEL);
if (kbuf == NULL)
return -ENOMEM;
err = os_read_file(state->fd, kbuf, count);
if (err < 0)
goto out;
if (copy_to_user(buffer, kbuf, err))
err = -EFAULT;
out:
kfree(kbuf);
return err;
}
static ssize_t hostaudio_write(struct file *file, const char __user *buffer,
size_t count, loff_t *ppos)
{
struct hostaudio_state *state = file->private_data;
void *kbuf;
int err;
#ifdef DEBUG
printk(KERN_DEBUG "hostaudio: write called, count = %d\n", count);
#endif
kbuf = kmalloc(count, GFP_KERNEL);
if (kbuf == NULL)
return -ENOMEM;
err = -EFAULT;
if (copy_from_user(kbuf, buffer, count))
goto out;
err = os_write_file(state->fd, kbuf, count);
if (err < 0)
goto out;
*ppos += err;
out:
kfree(kbuf);
return err;
}
static unsigned int hostaudio_poll(struct file *file,
struct poll_table_struct *wait)
{
unsigned int mask = 0;
#ifdef DEBUG
printk(KERN_DEBUG "hostaudio: poll called (unimplemented)\n");
#endif
return mask;
}
static long hostaudio_ioctl(struct file *file,
unsigned int cmd, unsigned long arg)
{
struct hostaudio_state *state = file->private_data;
unsigned long data = 0;
int err;
#ifdef DEBUG
printk(KERN_DEBUG "hostaudio: ioctl called, cmd = %u\n", cmd);
#endif
switch(cmd){
case SNDCTL_DSP_SPEED:
case SNDCTL_DSP_STEREO:
case SNDCTL_DSP_GETBLKSIZE:
case SNDCTL_DSP_CHANNELS:
case SNDCTL_DSP_SUBDIVIDE:
case SNDCTL_DSP_SETFRAGMENT:
if (get_user(data, (int __user *) arg))
return -EFAULT;
break;
default:
break;
}
err = os_ioctl_generic(state->fd, cmd, (unsigned long) &data);
switch(cmd){
case SNDCTL_DSP_SPEED:
case SNDCTL_DSP_STEREO:
case SNDCTL_DSP_GETBLKSIZE:
case SNDCTL_DSP_CHANNELS:
case SNDCTL_DSP_SUBDIVIDE:
case SNDCTL_DSP_SETFRAGMENT:
if (put_user(data, (int __user *) arg))
return -EFAULT;
break;
default:
break;
}
return err;
}
static int hostaudio_open(struct inode *inode, struct file *file)
{
struct hostaudio_state *state;
int r = 0, w = 0;
int ret;
#ifdef DEBUG
module: add per-module param_lock Add a "param_lock" mutex to each module, and update params.c to use the correct built-in or module mutex while locking kernel params. Remove the kparam_block_sysfs_r/w() macros, replace them with direct calls to kernel_param_[un]lock(module). The kernel param code currently uses a single mutex to protect modification of any and all kernel params. While this generally works, there is one specific problem with it; a module callback function cannot safely load another module, i.e. with request_module() or even with indirect calls such as crypto_has_alg(). If the module to be loaded has any of its params configured (e.g. with a /etc/modprobe.d/* config file), then the attempt will result in a deadlock between the first module param callback waiting for modprobe, and modprobe trying to lock the single kernel param mutex to set the new module's param. This fixes that by using per-module mutexes, so that each individual module is protected against concurrent changes in its own kernel params, but is not blocked by changes to other module params. All built-in modules continue to use the built-in mutex, since they will always be loaded at runtime and references (e.g. request_module(), crypto_has_alg()) to them will never cause load-time param changing. This also simplifies the interface used by modules to block sysfs access to their params; while there are currently functions to block and unblock sysfs param access which are split up by read and write and expect a single kernel param to be passed, their actual operation is identical and applies to all params, not just the one passed to them; they simply lock and unlock the global param mutex. They are replaced with direct calls to kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or if the module is built-in, it locks the built-in mutex. Suggested-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-17 04:48:52 +08:00
kernel_param_lock(THIS_MODULE);
printk(KERN_DEBUG "hostaudio: open called (host: %s)\n", dsp);
module: add per-module param_lock Add a "param_lock" mutex to each module, and update params.c to use the correct built-in or module mutex while locking kernel params. Remove the kparam_block_sysfs_r/w() macros, replace them with direct calls to kernel_param_[un]lock(module). The kernel param code currently uses a single mutex to protect modification of any and all kernel params. While this generally works, there is one specific problem with it; a module callback function cannot safely load another module, i.e. with request_module() or even with indirect calls such as crypto_has_alg(). If the module to be loaded has any of its params configured (e.g. with a /etc/modprobe.d/* config file), then the attempt will result in a deadlock between the first module param callback waiting for modprobe, and modprobe trying to lock the single kernel param mutex to set the new module's param. This fixes that by using per-module mutexes, so that each individual module is protected against concurrent changes in its own kernel params, but is not blocked by changes to other module params. All built-in modules continue to use the built-in mutex, since they will always be loaded at runtime and references (e.g. request_module(), crypto_has_alg()) to them will never cause load-time param changing. This also simplifies the interface used by modules to block sysfs access to their params; while there are currently functions to block and unblock sysfs param access which are split up by read and write and expect a single kernel param to be passed, their actual operation is identical and applies to all params, not just the one passed to them; they simply lock and unlock the global param mutex. They are replaced with direct calls to kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or if the module is built-in, it locks the built-in mutex. Suggested-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-17 04:48:52 +08:00
kernel_param_unlock(THIS_MODULE);
#endif
state = kmalloc(sizeof(struct hostaudio_state), GFP_KERNEL);
if (state == NULL)
return -ENOMEM;
if (file->f_mode & FMODE_READ)
r = 1;
if (file->f_mode & FMODE_WRITE)
w = 1;
module: add per-module param_lock Add a "param_lock" mutex to each module, and update params.c to use the correct built-in or module mutex while locking kernel params. Remove the kparam_block_sysfs_r/w() macros, replace them with direct calls to kernel_param_[un]lock(module). The kernel param code currently uses a single mutex to protect modification of any and all kernel params. While this generally works, there is one specific problem with it; a module callback function cannot safely load another module, i.e. with request_module() or even with indirect calls such as crypto_has_alg(). If the module to be loaded has any of its params configured (e.g. with a /etc/modprobe.d/* config file), then the attempt will result in a deadlock between the first module param callback waiting for modprobe, and modprobe trying to lock the single kernel param mutex to set the new module's param. This fixes that by using per-module mutexes, so that each individual module is protected against concurrent changes in its own kernel params, but is not blocked by changes to other module params. All built-in modules continue to use the built-in mutex, since they will always be loaded at runtime and references (e.g. request_module(), crypto_has_alg()) to them will never cause load-time param changing. This also simplifies the interface used by modules to block sysfs access to their params; while there are currently functions to block and unblock sysfs param access which are split up by read and write and expect a single kernel param to be passed, their actual operation is identical and applies to all params, not just the one passed to them; they simply lock and unlock the global param mutex. They are replaced with direct calls to kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or if the module is built-in, it locks the built-in mutex. Suggested-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-17 04:48:52 +08:00
kernel_param_lock(THIS_MODULE);
mutex_lock(&hostaudio_mutex);
ret = os_open_file(dsp, of_set_rw(OPENFLAGS(), r, w), 0);
mutex_unlock(&hostaudio_mutex);
module: add per-module param_lock Add a "param_lock" mutex to each module, and update params.c to use the correct built-in or module mutex while locking kernel params. Remove the kparam_block_sysfs_r/w() macros, replace them with direct calls to kernel_param_[un]lock(module). The kernel param code currently uses a single mutex to protect modification of any and all kernel params. While this generally works, there is one specific problem with it; a module callback function cannot safely load another module, i.e. with request_module() or even with indirect calls such as crypto_has_alg(). If the module to be loaded has any of its params configured (e.g. with a /etc/modprobe.d/* config file), then the attempt will result in a deadlock between the first module param callback waiting for modprobe, and modprobe trying to lock the single kernel param mutex to set the new module's param. This fixes that by using per-module mutexes, so that each individual module is protected against concurrent changes in its own kernel params, but is not blocked by changes to other module params. All built-in modules continue to use the built-in mutex, since they will always be loaded at runtime and references (e.g. request_module(), crypto_has_alg()) to them will never cause load-time param changing. This also simplifies the interface used by modules to block sysfs access to their params; while there are currently functions to block and unblock sysfs param access which are split up by read and write and expect a single kernel param to be passed, their actual operation is identical and applies to all params, not just the one passed to them; they simply lock and unlock the global param mutex. They are replaced with direct calls to kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or if the module is built-in, it locks the built-in mutex. Suggested-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-17 04:48:52 +08:00
kernel_param_unlock(THIS_MODULE);
if (ret < 0) {
kfree(state);
return ret;
}
state->fd = ret;
file->private_data = state;
return 0;
}
static int hostaudio_release(struct inode *inode, struct file *file)
{
struct hostaudio_state *state = file->private_data;
#ifdef DEBUG
printk(KERN_DEBUG "hostaudio: release called\n");
#endif
os_close_file(state->fd);
kfree(state);
return 0;
}
/* /dev/mixer file operations */
static long hostmixer_ioctl_mixdev(struct file *file,
unsigned int cmd, unsigned long arg)
{
struct hostmixer_state *state = file->private_data;
#ifdef DEBUG
printk(KERN_DEBUG "hostmixer: ioctl called\n");
#endif
return os_ioctl_generic(state->fd, cmd, arg);
}
static int hostmixer_open_mixdev(struct inode *inode, struct file *file)
{
struct hostmixer_state *state;
int r = 0, w = 0;
int ret;
#ifdef DEBUG
printk(KERN_DEBUG "hostmixer: open called (host: %s)\n", mixer);
#endif
state = kmalloc(sizeof(struct hostmixer_state), GFP_KERNEL);
if (state == NULL)
return -ENOMEM;
if (file->f_mode & FMODE_READ)
r = 1;
if (file->f_mode & FMODE_WRITE)
w = 1;
module: add per-module param_lock Add a "param_lock" mutex to each module, and update params.c to use the correct built-in or module mutex while locking kernel params. Remove the kparam_block_sysfs_r/w() macros, replace them with direct calls to kernel_param_[un]lock(module). The kernel param code currently uses a single mutex to protect modification of any and all kernel params. While this generally works, there is one specific problem with it; a module callback function cannot safely load another module, i.e. with request_module() or even with indirect calls such as crypto_has_alg(). If the module to be loaded has any of its params configured (e.g. with a /etc/modprobe.d/* config file), then the attempt will result in a deadlock between the first module param callback waiting for modprobe, and modprobe trying to lock the single kernel param mutex to set the new module's param. This fixes that by using per-module mutexes, so that each individual module is protected against concurrent changes in its own kernel params, but is not blocked by changes to other module params. All built-in modules continue to use the built-in mutex, since they will always be loaded at runtime and references (e.g. request_module(), crypto_has_alg()) to them will never cause load-time param changing. This also simplifies the interface used by modules to block sysfs access to their params; while there are currently functions to block and unblock sysfs param access which are split up by read and write and expect a single kernel param to be passed, their actual operation is identical and applies to all params, not just the one passed to them; they simply lock and unlock the global param mutex. They are replaced with direct calls to kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or if the module is built-in, it locks the built-in mutex. Suggested-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-17 04:48:52 +08:00
kernel_param_lock(THIS_MODULE);
mutex_lock(&hostaudio_mutex);
ret = os_open_file(mixer, of_set_rw(OPENFLAGS(), r, w), 0);
mutex_unlock(&hostaudio_mutex);
module: add per-module param_lock Add a "param_lock" mutex to each module, and update params.c to use the correct built-in or module mutex while locking kernel params. Remove the kparam_block_sysfs_r/w() macros, replace them with direct calls to kernel_param_[un]lock(module). The kernel param code currently uses a single mutex to protect modification of any and all kernel params. While this generally works, there is one specific problem with it; a module callback function cannot safely load another module, i.e. with request_module() or even with indirect calls such as crypto_has_alg(). If the module to be loaded has any of its params configured (e.g. with a /etc/modprobe.d/* config file), then the attempt will result in a deadlock between the first module param callback waiting for modprobe, and modprobe trying to lock the single kernel param mutex to set the new module's param. This fixes that by using per-module mutexes, so that each individual module is protected against concurrent changes in its own kernel params, but is not blocked by changes to other module params. All built-in modules continue to use the built-in mutex, since they will always be loaded at runtime and references (e.g. request_module(), crypto_has_alg()) to them will never cause load-time param changing. This also simplifies the interface used by modules to block sysfs access to their params; while there are currently functions to block and unblock sysfs param access which are split up by read and write and expect a single kernel param to be passed, their actual operation is identical and applies to all params, not just the one passed to them; they simply lock and unlock the global param mutex. They are replaced with direct calls to kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or if the module is built-in, it locks the built-in mutex. Suggested-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-17 04:48:52 +08:00
kernel_param_unlock(THIS_MODULE);
if (ret < 0) {
module: add per-module param_lock Add a "param_lock" mutex to each module, and update params.c to use the correct built-in or module mutex while locking kernel params. Remove the kparam_block_sysfs_r/w() macros, replace them with direct calls to kernel_param_[un]lock(module). The kernel param code currently uses a single mutex to protect modification of any and all kernel params. While this generally works, there is one specific problem with it; a module callback function cannot safely load another module, i.e. with request_module() or even with indirect calls such as crypto_has_alg(). If the module to be loaded has any of its params configured (e.g. with a /etc/modprobe.d/* config file), then the attempt will result in a deadlock between the first module param callback waiting for modprobe, and modprobe trying to lock the single kernel param mutex to set the new module's param. This fixes that by using per-module mutexes, so that each individual module is protected against concurrent changes in its own kernel params, but is not blocked by changes to other module params. All built-in modules continue to use the built-in mutex, since they will always be loaded at runtime and references (e.g. request_module(), crypto_has_alg()) to them will never cause load-time param changing. This also simplifies the interface used by modules to block sysfs access to their params; while there are currently functions to block and unblock sysfs param access which are split up by read and write and expect a single kernel param to be passed, their actual operation is identical and applies to all params, not just the one passed to them; they simply lock and unlock the global param mutex. They are replaced with direct calls to kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or if the module is built-in, it locks the built-in mutex. Suggested-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-17 04:48:52 +08:00
kernel_param_lock(THIS_MODULE);
printk(KERN_ERR "hostaudio_open_mixdev failed to open '%s', "
"err = %d\n", dsp, -ret);
module: add per-module param_lock Add a "param_lock" mutex to each module, and update params.c to use the correct built-in or module mutex while locking kernel params. Remove the kparam_block_sysfs_r/w() macros, replace them with direct calls to kernel_param_[un]lock(module). The kernel param code currently uses a single mutex to protect modification of any and all kernel params. While this generally works, there is one specific problem with it; a module callback function cannot safely load another module, i.e. with request_module() or even with indirect calls such as crypto_has_alg(). If the module to be loaded has any of its params configured (e.g. with a /etc/modprobe.d/* config file), then the attempt will result in a deadlock between the first module param callback waiting for modprobe, and modprobe trying to lock the single kernel param mutex to set the new module's param. This fixes that by using per-module mutexes, so that each individual module is protected against concurrent changes in its own kernel params, but is not blocked by changes to other module params. All built-in modules continue to use the built-in mutex, since they will always be loaded at runtime and references (e.g. request_module(), crypto_has_alg()) to them will never cause load-time param changing. This also simplifies the interface used by modules to block sysfs access to their params; while there are currently functions to block and unblock sysfs param access which are split up by read and write and expect a single kernel param to be passed, their actual operation is identical and applies to all params, not just the one passed to them; they simply lock and unlock the global param mutex. They are replaced with direct calls to kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or if the module is built-in, it locks the built-in mutex. Suggested-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-17 04:48:52 +08:00
kernel_param_unlock(THIS_MODULE);
kfree(state);
return ret;
}
file->private_data = state;
return 0;
}
static int hostmixer_release(struct inode *inode, struct file *file)
{
struct hostmixer_state *state = file->private_data;
#ifdef DEBUG
printk(KERN_DEBUG "hostmixer: release called\n");
#endif
os_close_file(state->fd);
kfree(state);
return 0;
}
/* kernel module operations */
static const struct file_operations hostaudio_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = hostaudio_read,
.write = hostaudio_write,
.poll = hostaudio_poll,
.unlocked_ioctl = hostaudio_ioctl,
.mmap = NULL,
.open = hostaudio_open,
.release = hostaudio_release,
};
static const struct file_operations hostmixer_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.unlocked_ioctl = hostmixer_ioctl_mixdev,
.open = hostmixer_open_mixdev,
.release = hostmixer_release,
};
struct {
int dev_audio;
int dev_mixer;
} module_data;
MODULE_AUTHOR("Steve Schmidtke");
MODULE_DESCRIPTION("UML Audio Relay");
MODULE_LICENSE("GPL");
static int __init hostaudio_init_module(void)
{
module: add per-module param_lock Add a "param_lock" mutex to each module, and update params.c to use the correct built-in or module mutex while locking kernel params. Remove the kparam_block_sysfs_r/w() macros, replace them with direct calls to kernel_param_[un]lock(module). The kernel param code currently uses a single mutex to protect modification of any and all kernel params. While this generally works, there is one specific problem with it; a module callback function cannot safely load another module, i.e. with request_module() or even with indirect calls such as crypto_has_alg(). If the module to be loaded has any of its params configured (e.g. with a /etc/modprobe.d/* config file), then the attempt will result in a deadlock between the first module param callback waiting for modprobe, and modprobe trying to lock the single kernel param mutex to set the new module's param. This fixes that by using per-module mutexes, so that each individual module is protected against concurrent changes in its own kernel params, but is not blocked by changes to other module params. All built-in modules continue to use the built-in mutex, since they will always be loaded at runtime and references (e.g. request_module(), crypto_has_alg()) to them will never cause load-time param changing. This also simplifies the interface used by modules to block sysfs access to their params; while there are currently functions to block and unblock sysfs param access which are split up by read and write and expect a single kernel param to be passed, their actual operation is identical and applies to all params, not just the one passed to them; they simply lock and unlock the global param mutex. They are replaced with direct calls to kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or if the module is built-in, it locks the built-in mutex. Suggested-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-17 04:48:52 +08:00
kernel_param_lock(THIS_MODULE);
printk(KERN_INFO "UML Audio Relay (host dsp = %s, host mixer = %s)\n",
dsp, mixer);
module: add per-module param_lock Add a "param_lock" mutex to each module, and update params.c to use the correct built-in or module mutex while locking kernel params. Remove the kparam_block_sysfs_r/w() macros, replace them with direct calls to kernel_param_[un]lock(module). The kernel param code currently uses a single mutex to protect modification of any and all kernel params. While this generally works, there is one specific problem with it; a module callback function cannot safely load another module, i.e. with request_module() or even with indirect calls such as crypto_has_alg(). If the module to be loaded has any of its params configured (e.g. with a /etc/modprobe.d/* config file), then the attempt will result in a deadlock between the first module param callback waiting for modprobe, and modprobe trying to lock the single kernel param mutex to set the new module's param. This fixes that by using per-module mutexes, so that each individual module is protected against concurrent changes in its own kernel params, but is not blocked by changes to other module params. All built-in modules continue to use the built-in mutex, since they will always be loaded at runtime and references (e.g. request_module(), crypto_has_alg()) to them will never cause load-time param changing. This also simplifies the interface used by modules to block sysfs access to their params; while there are currently functions to block and unblock sysfs param access which are split up by read and write and expect a single kernel param to be passed, their actual operation is identical and applies to all params, not just the one passed to them; they simply lock and unlock the global param mutex. They are replaced with direct calls to kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or if the module is built-in, it locks the built-in mutex. Suggested-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-17 04:48:52 +08:00
kernel_param_unlock(THIS_MODULE);
module_data.dev_audio = register_sound_dsp(&hostaudio_fops, -1);
if (module_data.dev_audio < 0) {
printk(KERN_ERR "hostaudio: couldn't register DSP device!\n");
return -ENODEV;
}
module_data.dev_mixer = register_sound_mixer(&hostmixer_fops, -1);
if (module_data.dev_mixer < 0) {
printk(KERN_ERR "hostmixer: couldn't register mixer "
"device!\n");
unregister_sound_dsp(module_data.dev_audio);
return -ENODEV;
}
return 0;
}
static void __exit hostaudio_cleanup_module (void)
{
unregister_sound_mixer(module_data.dev_mixer);
unregister_sound_dsp(module_data.dev_audio);
}
module_init(hostaudio_init_module);
module_exit(hostaudio_cleanup_module);