linux/drivers/usb/gadget/langwell_udc.c

3435 lines
85 KiB
C
Raw Normal View History

USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/*
* Intel Langwell USB Device Controller driver
* Copyright (C) 2008-2009, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*/
/* #undef DEBUG */
/* #undef VERBOSE_DEBUG */
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
#include <linux/pm.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <asm/unaligned.h>
#include "langwell_udc.h"
#define DRIVER_DESC "Intel Langwell USB Device Controller driver"
#define DRIVER_VERSION "16 May 2009"
static const char driver_name[] = "langwell_udc";
static const char driver_desc[] = DRIVER_DESC;
/* for endpoint 0 operations */
static const struct usb_endpoint_descriptor
langwell_ep0_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0,
.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
.wMaxPacketSize = EP0_MAX_PKT_SIZE,
};
/*-------------------------------------------------------------------------*/
/* debugging */
#ifdef VERBOSE_DEBUG
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
static inline void print_all_registers(struct langwell_udc *dev)
{
int i;
/* Capability Registers */
dev_dbg(&dev->pdev->dev,
"Capability Registers (offset: 0x%04x, length: 0x%08x)\n",
CAP_REG_OFFSET, (u32)sizeof(struct langwell_cap_regs));
dev_dbg(&dev->pdev->dev, "caplength=0x%02x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readb(&dev->cap_regs->caplength));
dev_dbg(&dev->pdev->dev, "hciversion=0x%04x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readw(&dev->cap_regs->hciversion));
dev_dbg(&dev->pdev->dev, "hcsparams=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->cap_regs->hcsparams));
dev_dbg(&dev->pdev->dev, "hccparams=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->cap_regs->hccparams));
dev_dbg(&dev->pdev->dev, "dciversion=0x%04x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readw(&dev->cap_regs->dciversion));
dev_dbg(&dev->pdev->dev, "dccparams=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->cap_regs->dccparams));
/* Operational Registers */
dev_dbg(&dev->pdev->dev,
"Operational Registers (offset: 0x%04x, length: 0x%08x)\n",
OP_REG_OFFSET, (u32)sizeof(struct langwell_op_regs));
dev_dbg(&dev->pdev->dev, "extsts=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->extsts));
dev_dbg(&dev->pdev->dev, "extintr=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->extintr));
dev_dbg(&dev->pdev->dev, "usbcmd=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->usbcmd));
dev_dbg(&dev->pdev->dev, "usbsts=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->usbsts));
dev_dbg(&dev->pdev->dev, "usbintr=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->usbintr));
dev_dbg(&dev->pdev->dev, "frindex=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->frindex));
dev_dbg(&dev->pdev->dev, "ctrldssegment=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->ctrldssegment));
dev_dbg(&dev->pdev->dev, "deviceaddr=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->deviceaddr));
dev_dbg(&dev->pdev->dev, "endpointlistaddr=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->endpointlistaddr));
dev_dbg(&dev->pdev->dev, "ttctrl=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->ttctrl));
dev_dbg(&dev->pdev->dev, "burstsize=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->burstsize));
dev_dbg(&dev->pdev->dev, "txfilltuning=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->txfilltuning));
dev_dbg(&dev->pdev->dev, "txttfilltuning=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->txttfilltuning));
dev_dbg(&dev->pdev->dev, "ic_usb=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->ic_usb));
dev_dbg(&dev->pdev->dev, "ulpi_viewport=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->ulpi_viewport));
dev_dbg(&dev->pdev->dev, "configflag=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->configflag));
dev_dbg(&dev->pdev->dev, "portsc1=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->portsc1));
dev_dbg(&dev->pdev->dev, "devlc=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->devlc));
dev_dbg(&dev->pdev->dev, "otgsc=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->otgsc));
dev_dbg(&dev->pdev->dev, "usbmode=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->usbmode));
dev_dbg(&dev->pdev->dev, "endptnak=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->endptnak));
dev_dbg(&dev->pdev->dev, "endptnaken=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->endptnaken));
dev_dbg(&dev->pdev->dev, "endptsetupstat=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->endptsetupstat));
dev_dbg(&dev->pdev->dev, "endptprime=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->endptprime));
dev_dbg(&dev->pdev->dev, "endptflush=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->endptflush));
dev_dbg(&dev->pdev->dev, "endptstat=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->endptstat));
dev_dbg(&dev->pdev->dev, "endptcomplete=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
readl(&dev->op_regs->endptcomplete));
for (i = 0; i < dev->ep_max / 2; i++) {
dev_dbg(&dev->pdev->dev, "endptctrl[%d]=0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
i, readl(&dev->op_regs->endptctrl[i]));
}
}
#else
#define print_all_registers(dev) do { } while (0)
#endif /* VERBOSE_DEBUG */
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/*-------------------------------------------------------------------------*/
#define is_in(ep) (((ep)->ep_num == 0) ? ((ep)->dev->ep0_dir == \
USB_DIR_IN) : (usb_endpoint_dir_in((ep)->desc)))
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
#define DIR_STRING(ep) (is_in(ep) ? "in" : "out")
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
static char *type_string(const struct usb_endpoint_descriptor *desc)
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
{
switch (usb_endpoint_type(desc)) {
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
case USB_ENDPOINT_XFER_BULK:
return "bulk";
case USB_ENDPOINT_XFER_ISOC:
return "iso";
case USB_ENDPOINT_XFER_INT:
return "int";
};
return "control";
}
/* configure endpoint control registers */
static void ep_reset(struct langwell_ep *ep, unsigned char ep_num,
unsigned char is_in, unsigned char ep_type)
{
struct langwell_udc *dev;
u32 endptctrl;
dev = ep->dev;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
if (is_in) { /* TX */
if (ep_num)
endptctrl |= EPCTRL_TXR;
endptctrl |= EPCTRL_TXE;
endptctrl |= ep_type << EPCTRL_TXT_SHIFT;
} else { /* RX */
if (ep_num)
endptctrl |= EPCTRL_RXR;
endptctrl |= EPCTRL_RXE;
endptctrl |= ep_type << EPCTRL_RXT_SHIFT;
}
writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* reset ep0 dQH and endptctrl */
static void ep0_reset(struct langwell_udc *dev)
{
struct langwell_ep *ep;
int i;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* ep0 in and out */
for (i = 0; i < 2; i++) {
ep = &dev->ep[i];
ep->dev = dev;
/* ep0 dQH */
ep->dqh = &dev->ep_dqh[i];
/* configure ep0 endpoint capabilities in dQH */
ep->dqh->dqh_ios = 1;
ep->dqh->dqh_mpl = EP0_MAX_PKT_SIZE;
/* enable ep0-in HW zero length termination select */
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (is_in(ep))
ep->dqh->dqh_zlt = 0;
ep->dqh->dqh_mult = 0;
ep->dqh->dtd_next = DTD_TERM;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* configure ep0 control registers */
ep_reset(&dev->ep[0], 0, i, USB_ENDPOINT_XFER_CONTROL);
}
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/*-------------------------------------------------------------------------*/
/* endpoints operations */
/* configure endpoint, making it usable */
static int langwell_ep_enable(struct usb_ep *_ep,
const struct usb_endpoint_descriptor *desc)
{
struct langwell_udc *dev;
struct langwell_ep *ep;
u16 max = 0;
unsigned long flags;
int i, retval = 0;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
unsigned char zlt, ios = 0, mult = 0;
ep = container_of(_ep, struct langwell_ep, ep);
dev = ep->dev;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (!_ep || !desc || ep->desc
|| desc->bDescriptorType != USB_DT_ENDPOINT)
return -EINVAL;
if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
return -ESHUTDOWN;
USB: use usb_endpoint_maxp() instead of le16_to_cpu() Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst <fuerst@in.tum.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Erdfelt <johannes@erdfelt.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Oliver Neukum <oliver@neukum.name> Cc: David Kubicek <dave@awk.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Brad Hards <bhards@bigpond.net.au> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: David Brownell <david-b@pacbell.net> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Xie Xiaobo <X.Xie@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Jiang Bo <tanya.jiang@freescale.com> Cc: Yuan-hsin Chen <yhchen@faraday-tech.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Herbert Pötzl <herbert@13thfloor.at> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Roman Weissgaerber <weissg@vienna.at> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Florian Floe Echtler <echtler@fs.tum.de> Cc: Christian Lucht <lucht@codemercs.com> Cc: Juergen Stuber <starblue@sourceforge.net> Cc: Georges Toth <g.toth@e-biz.lu> Cc: Bill Ryder <bryder@sgi.com> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 18:12:03 +08:00
max = usb_endpoint_maxp(desc);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/*
* disable HW zero length termination select
* driver handles zero length packet through req->req.zero
*/
zlt = 1;
/*
* sanity check type, direction, address, and then
* initialize the endpoint capabilities fields in dQH
*/
switch (usb_endpoint_type(desc)) {
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
case USB_ENDPOINT_XFER_CONTROL:
ios = 1;
break;
case USB_ENDPOINT_XFER_BULK:
if ((dev->gadget.speed == USB_SPEED_HIGH
&& max != 512)
|| (dev->gadget.speed == USB_SPEED_FULL
&& max > 64)) {
goto done;
}
break;
case USB_ENDPOINT_XFER_INT:
if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
goto done;
switch (dev->gadget.speed) {
case USB_SPEED_HIGH:
if (max <= 1024)
break;
case USB_SPEED_FULL:
if (max <= 64)
break;
default:
if (max <= 8)
break;
goto done;
}
break;
case USB_ENDPOINT_XFER_ISOC:
if (strstr(ep->ep.name, "-bulk")
|| strstr(ep->ep.name, "-int"))
goto done;
switch (dev->gadget.speed) {
case USB_SPEED_HIGH:
if (max <= 1024)
break;
case USB_SPEED_FULL:
if (max <= 1023)
break;
default:
goto done;
}
/*
* FIXME:
* calculate transactions needed for high bandwidth iso
*/
mult = (unsigned char)(1 + ((max >> 11) & 0x03));
max = max & 0x8ff; /* bit 0~10 */
/* 3 transactions at most */
if (mult > 3)
goto done;
break;
default:
goto done;
}
spin_lock_irqsave(&dev->lock, flags);
ep->ep.maxpacket = max;
ep->desc = desc;
ep->stopped = 0;
ep->ep_num = usb_endpoint_num(desc);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* ep_type */
ep->ep_type = usb_endpoint_type(desc);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* configure endpoint control registers */
ep_reset(ep, ep->ep_num, is_in(ep), ep->ep_type);
/* configure endpoint capabilities in dQH */
i = ep->ep_num * 2 + is_in(ep);
ep->dqh = &dev->ep_dqh[i];
ep->dqh->dqh_ios = ios;
ep->dqh->dqh_mpl = cpu_to_le16(max);
ep->dqh->dqh_zlt = zlt;
ep->dqh->dqh_mult = mult;
ep->dqh->dtd_next = DTD_TERM;
dev_dbg(&dev->pdev->dev, "enabled %s (ep%d%s-%s), max %04x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
_ep->name,
ep->ep_num,
DIR_STRING(ep),
type_string(desc),
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
max);
spin_unlock_irqrestore(&dev->lock, flags);
done:
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return retval;
}
/*-------------------------------------------------------------------------*/
/* retire a request */
static void done(struct langwell_ep *ep, struct langwell_request *req,
int status)
{
struct langwell_udc *dev = ep->dev;
unsigned stopped = ep->stopped;
struct langwell_dtd *curr_dtd, *next_dtd;
int i;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* remove the req from ep->queue */
list_del_init(&req->queue);
if (req->req.status == -EINPROGRESS)
req->req.status = status;
else
status = req->req.status;
/* free dTD for the request */
next_dtd = req->head;
for (i = 0; i < req->dtd_count; i++) {
curr_dtd = next_dtd;
if (i != req->dtd_count - 1)
next_dtd = curr_dtd->next_dtd_virt;
dma_pool_free(dev->dtd_pool, curr_dtd, curr_dtd->dtd_dma);
}
usb_gadget_unmap_request(&dev->gadget, &req->req, is_in(ep));
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (status != -ESHUTDOWN)
dev_dbg(&dev->pdev->dev,
"complete %s, req %p, stat %d, len %u/%u\n",
ep->ep.name, &req->req, status,
req->req.actual, req->req.length);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* don't modify queue heads during completion callback */
ep->stopped = 1;
spin_unlock(&dev->lock);
/* complete routine from gadget driver */
if (req->req.complete)
req->req.complete(&ep->ep, &req->req);
spin_lock(&dev->lock);
ep->stopped = stopped;
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
static void langwell_ep_fifo_flush(struct usb_ep *_ep);
/* delete all endpoint requests, called with spinlock held */
static void nuke(struct langwell_ep *ep, int status)
{
/* called with spinlock held */
ep->stopped = 1;
/* endpoint fifo flush */
if (&ep->ep && ep->desc)
langwell_ep_fifo_flush(&ep->ep);
while (!list_empty(&ep->queue)) {
struct langwell_request *req = NULL;
req = list_entry(ep->queue.next, struct langwell_request,
queue);
done(ep, req, status);
}
}
/*-------------------------------------------------------------------------*/
/* endpoint is no longer usable */
static int langwell_ep_disable(struct usb_ep *_ep)
{
struct langwell_ep *ep;
unsigned long flags;
struct langwell_udc *dev;
int ep_num;
u32 endptctrl;
ep = container_of(_ep, struct langwell_ep, ep);
dev = ep->dev;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (!_ep || !ep->desc)
return -EINVAL;
spin_lock_irqsave(&dev->lock, flags);
/* disable endpoint control register */
ep_num = ep->ep_num;
endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
if (is_in(ep))
endptctrl &= ~EPCTRL_TXE;
else
endptctrl &= ~EPCTRL_RXE;
writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
/* nuke all pending requests (does flush) */
nuke(ep, -ESHUTDOWN);
ep->desc = NULL;
ep->ep.desc = NULL;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
ep->stopped = 1;
spin_unlock_irqrestore(&dev->lock, flags);
dev_dbg(&dev->pdev->dev, "disabled %s\n", _ep->name);
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return 0;
}
/* allocate a request object to use with this endpoint */
static struct usb_request *langwell_alloc_request(struct usb_ep *_ep,
gfp_t gfp_flags)
{
struct langwell_ep *ep;
struct langwell_udc *dev;
struct langwell_request *req = NULL;
if (!_ep)
return NULL;
ep = container_of(_ep, struct langwell_ep, ep);
dev = ep->dev;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
req = kzalloc(sizeof(*req), gfp_flags);
if (!req)
return NULL;
req->req.dma = DMA_ADDR_INVALID;
INIT_LIST_HEAD(&req->queue);
dev_vdbg(&dev->pdev->dev, "alloc request for %s\n", _ep->name);
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return &req->req;
}
/* free a request object */
static void langwell_free_request(struct usb_ep *_ep,
struct usb_request *_req)
{
struct langwell_ep *ep;
struct langwell_udc *dev;
struct langwell_request *req = NULL;
ep = container_of(_ep, struct langwell_ep, ep);
dev = ep->dev;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (!_ep || !_req)
return;
req = container_of(_req, struct langwell_request, req);
WARN_ON(!list_empty(&req->queue));
if (_req)
kfree(req);
dev_vdbg(&dev->pdev->dev, "free request for %s\n", _ep->name);
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/*-------------------------------------------------------------------------*/
/* queue dTD and PRIME endpoint */
static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
{
u32 bit_mask, usbcmd, endptstat, dtd_dma;
u8 dtd_status;
int i;
struct langwell_dqh *dqh;
struct langwell_udc *dev;
dev = ep->dev;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
i = ep->ep_num * 2 + is_in(ep);
dqh = &dev->ep_dqh[i];
if (ep->ep_num)
dev_vdbg(&dev->pdev->dev, "%s\n", ep->name);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
else
/* ep0 */
dev_vdbg(&dev->pdev->dev, "%s-%s\n", ep->name, DIR_STRING(ep));
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev_vdbg(&dev->pdev->dev, "ep_dqh[%d] addr: 0x%p\n",
i, &(dev->ep_dqh[i]));
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
bit_mask = is_in(ep) ?
(1 << (ep->ep_num + 16)) : (1 << (ep->ep_num));
dev_vdbg(&dev->pdev->dev, "bit_mask = 0x%08x\n", bit_mask);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* check if the pipe is empty */
if (!(list_empty(&ep->queue))) {
/* add dTD to the end of linked list */
struct langwell_request *lastreq;
lastreq = list_entry(ep->queue.prev,
struct langwell_request, queue);
lastreq->tail->dtd_next =
cpu_to_le32(req->head->dtd_dma & DTD_NEXT_MASK);
/* read prime bit, if 1 goto out */
if (readl(&dev->op_regs->endptprime) & bit_mask)
goto out;
do {
/* set ATDTW bit in USBCMD */
usbcmd = readl(&dev->op_regs->usbcmd);
writel(usbcmd | CMD_ATDTW, &dev->op_regs->usbcmd);
/* read correct status bit */
endptstat = readl(&dev->op_regs->endptstat) & bit_mask;
} while (!(readl(&dev->op_regs->usbcmd) & CMD_ATDTW));
/* write ATDTW bit to 0 */
usbcmd = readl(&dev->op_regs->usbcmd);
writel(usbcmd & ~CMD_ATDTW, &dev->op_regs->usbcmd);
if (endptstat)
goto out;
}
/* write dQH next pointer and terminate bit to 0 */
dtd_dma = req->head->dtd_dma & DTD_NEXT_MASK;
dqh->dtd_next = cpu_to_le32(dtd_dma);
/* clear active and halt bit */
dtd_status = (u8) ~(DTD_STS_ACTIVE | DTD_STS_HALTED);
dqh->dtd_status &= dtd_status;
dev_vdbg(&dev->pdev->dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
/* ensure that updates to the dQH will occur before priming */
wmb();
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* write 1 to endptprime register to PRIME endpoint */
bit_mask = is_in(ep) ? (1 << (ep->ep_num + 16)) : (1 << ep->ep_num);
dev_vdbg(&dev->pdev->dev, "endprime bit_mask = 0x%08x\n", bit_mask);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
writel(bit_mask, &dev->op_regs->endptprime);
out:
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return 0;
}
/* fill in the dTD structure to build a transfer descriptor */
static struct langwell_dtd *build_dtd(struct langwell_request *req,
unsigned *length, dma_addr_t *dma, int *is_last)
{
u32 buf_ptr;
struct langwell_dtd *dtd;
struct langwell_udc *dev;
int i;
dev = req->ep->dev;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* the maximum transfer length, up to 16k bytes */
*length = min(req->req.length - req->req.actual,
(unsigned)DTD_MAX_TRANSFER_LENGTH);
/* create dTD dma_pool resource */
dtd = dma_pool_alloc(dev->dtd_pool, GFP_KERNEL, dma);
if (dtd == NULL)
return dtd;
dtd->dtd_dma = *dma;
/* initialize buffer page pointers */
buf_ptr = (u32)(req->req.dma + req->req.actual);
for (i = 0; i < 5; i++)
dtd->dtd_buf[i] = cpu_to_le32(buf_ptr + i * PAGE_SIZE);
req->req.actual += *length;
/* fill in total bytes with transfer size */
dtd->dtd_total = cpu_to_le16(*length);
dev_vdbg(&dev->pdev->dev, "dtd->dtd_total = %d\n", dtd->dtd_total);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* set is_last flag if req->req.zero is set or not */
if (req->req.zero) {
if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
*is_last = 1;
else
*is_last = 0;
} else if (req->req.length == req->req.actual) {
*is_last = 1;
} else
*is_last = 0;
if (*is_last == 0)
dev_vdbg(&dev->pdev->dev, "multi-dtd request!\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* set interrupt on complete bit for the last dTD */
if (*is_last && !req->req.no_interrupt)
dtd->dtd_ioc = 1;
/* set multiplier override 0 for non-ISO and non-TX endpoint */
dtd->dtd_multo = 0;
/* set the active bit of status field to 1 */
dtd->dtd_status = DTD_STS_ACTIVE;
dev_vdbg(&dev->pdev->dev, "dtd->dtd_status = 0x%02x\n",
dtd->dtd_status);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev_vdbg(&dev->pdev->dev, "length = %d, dma addr= 0x%08x\n",
*length, (int)*dma);
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return dtd;
}
/* generate dTD linked list for a request */
static int req_to_dtd(struct langwell_request *req)
{
unsigned count;
int is_last, is_first = 1;
struct langwell_dtd *dtd, *last_dtd = NULL;
struct langwell_udc *dev;
dma_addr_t dma;
dev = req->ep->dev;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
do {
dtd = build_dtd(req, &count, &dma, &is_last);
if (dtd == NULL)
return -ENOMEM;
if (is_first) {
is_first = 0;
req->head = dtd;
} else {
last_dtd->dtd_next = cpu_to_le32(dma);
last_dtd->next_dtd_virt = dtd;
}
last_dtd = dtd;
req->dtd_count++;
} while (!is_last);
/* set terminate bit to 1 for the last dTD */
dtd->dtd_next = DTD_TERM;
req->tail = dtd;
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return 0;
}
/*-------------------------------------------------------------------------*/
/* queue (submits) an I/O requests to an endpoint */
static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
gfp_t gfp_flags)
{
struct langwell_request *req;
struct langwell_ep *ep;
struct langwell_udc *dev;
unsigned long flags;
int is_iso = 0;
int ret;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* always require a cpu-view buffer */
req = container_of(_req, struct langwell_request, req);
ep = container_of(_ep, struct langwell_ep, ep);
if (!_req || !_req->complete || !_req->buf
|| !list_empty(&req->queue)) {
return -EINVAL;
}
if (unlikely(!_ep || !ep->desc))
return -EINVAL;
dev = ep->dev;
req->ep = ep;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (usb_endpoint_xfer_isoc(ep->desc)) {
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (req->req.length > ep->ep.maxpacket)
return -EMSGSIZE;
is_iso = 1;
}
if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
return -ESHUTDOWN;
/* set up dma mapping */
ret = usb_gadget_map_request(&dev->gadget, &req->req, is_in(ep));
if (ret)
return ret;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev_dbg(&dev->pdev->dev,
"%s queue req %p, len %u, buf %p, dma 0x%08x\n",
_ep->name,
_req, _req->length, _req->buf, (int)_req->dma);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
_req->status = -EINPROGRESS;
_req->actual = 0;
req->dtd_count = 0;
spin_lock_irqsave(&dev->lock, flags);
/* build and put dTDs to endpoint queue */
if (!req_to_dtd(req)) {
queue_dtd(ep, req);
} else {
spin_unlock_irqrestore(&dev->lock, flags);
return -ENOMEM;
}
/* update ep0 state */
if (ep->ep_num == 0)
dev->ep0_state = DATA_STATE_XMIT;
if (likely(req != NULL)) {
list_add_tail(&req->queue, &ep->queue);
dev_vdbg(&dev->pdev->dev, "list_add_tail()\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
spin_unlock_irqrestore(&dev->lock, flags);
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return 0;
}
/* dequeue (cancels, unlinks) an I/O request from an endpoint */
static int langwell_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
{
struct langwell_ep *ep;
struct langwell_udc *dev;
struct langwell_request *req;
unsigned long flags;
int stopped, ep_num, retval = 0;
u32 endptctrl;
ep = container_of(_ep, struct langwell_ep, ep);
dev = ep->dev;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (!_ep || !ep->desc || !_req)
return -EINVAL;
if (!dev->driver)
return -ESHUTDOWN;
spin_lock_irqsave(&dev->lock, flags);
stopped = ep->stopped;
/* quiesce dma while we patch the queue */
ep->stopped = 1;
ep_num = ep->ep_num;
/* disable endpoint control register */
endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
if (is_in(ep))
endptctrl &= ~EPCTRL_TXE;
else
endptctrl &= ~EPCTRL_RXE;
writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
/* make sure it's still queued on this endpoint */
list_for_each_entry(req, &ep->queue, queue) {
if (&req->req == _req)
break;
}
if (&req->req != _req) {
retval = -EINVAL;
goto done;
}
/* queue head may be partially complete. */
if (ep->queue.next == &req->queue) {
dev_dbg(&dev->pdev->dev, "unlink (%s) dma\n", _ep->name);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
_req->status = -ECONNRESET;
langwell_ep_fifo_flush(&ep->ep);
/* not the last request in endpoint queue */
if (likely(ep->queue.next == &req->queue)) {
struct langwell_dqh *dqh;
struct langwell_request *next_req;
dqh = ep->dqh;
next_req = list_entry(req->queue.next,
struct langwell_request, queue);
/* point the dQH to the first dTD of next request */
writel((u32) next_req->head, &dqh->dqh_current);
}
} else {
struct langwell_request *prev_req;
prev_req = list_entry(req->queue.prev,
struct langwell_request, queue);
writel(readl(&req->tail->dtd_next),
&prev_req->tail->dtd_next);
}
done(ep, req, -ECONNRESET);
done:
/* enable endpoint again */
endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
if (is_in(ep))
endptctrl |= EPCTRL_TXE;
else
endptctrl |= EPCTRL_RXE;
writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
ep->stopped = stopped;
spin_unlock_irqrestore(&dev->lock, flags);
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return retval;
}
/*-------------------------------------------------------------------------*/
/* endpoint set/clear halt */
static void ep_set_halt(struct langwell_ep *ep, int value)
{
u32 endptctrl = 0;
int ep_num;
struct langwell_udc *dev = ep->dev;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
ep_num = ep->ep_num;
endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
/* value: 1 - set halt, 0 - clear halt */
if (value) {
/* set the stall bit */
if (is_in(ep))
endptctrl |= EPCTRL_TXS;
else
endptctrl |= EPCTRL_RXS;
} else {
/* clear the stall bit and reset data toggle */
if (is_in(ep)) {
endptctrl &= ~EPCTRL_TXS;
endptctrl |= EPCTRL_TXR;
} else {
endptctrl &= ~EPCTRL_RXS;
endptctrl |= EPCTRL_RXR;
}
}
writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* set the endpoint halt feature */
static int langwell_ep_set_halt(struct usb_ep *_ep, int value)
{
struct langwell_ep *ep;
struct langwell_udc *dev;
unsigned long flags;
int retval = 0;
ep = container_of(_ep, struct langwell_ep, ep);
dev = ep->dev;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (!_ep || !ep->desc)
return -EINVAL;
if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
return -ESHUTDOWN;
if (usb_endpoint_xfer_isoc(ep->desc))
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return -EOPNOTSUPP;
spin_lock_irqsave(&dev->lock, flags);
/*
* attempt to halt IN ep will fail if any transfer requests
* are still queue
*/
if (!list_empty(&ep->queue) && is_in(ep) && value) {
/* IN endpoint FIFO holds bytes */
dev_dbg(&dev->pdev->dev, "%s FIFO holds bytes\n", _ep->name);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
retval = -EAGAIN;
goto done;
}
/* endpoint set/clear halt */
if (ep->ep_num) {
ep_set_halt(ep, value);
} else { /* endpoint 0 */
dev->ep0_state = WAIT_FOR_SETUP;
dev->ep0_dir = USB_DIR_OUT;
}
done:
spin_unlock_irqrestore(&dev->lock, flags);
dev_dbg(&dev->pdev->dev, "%s %s halt\n",
_ep->name, value ? "set" : "clear");
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return retval;
}
/* set the halt feature and ignores clear requests */
static int langwell_ep_set_wedge(struct usb_ep *_ep)
{
struct langwell_ep *ep;
struct langwell_udc *dev;
ep = container_of(_ep, struct langwell_ep, ep);
dev = ep->dev;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (!_ep || !ep->desc)
return -EINVAL;
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return usb_ep_set_halt(_ep);
}
/* flush contents of a fifo */
static void langwell_ep_fifo_flush(struct usb_ep *_ep)
{
struct langwell_ep *ep;
struct langwell_udc *dev;
u32 flush_bit;
unsigned long timeout;
ep = container_of(_ep, struct langwell_ep, ep);
dev = ep->dev;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (!_ep || !ep->desc) {
dev_vdbg(&dev->pdev->dev, "ep or ep->desc is NULL\n");
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return;
}
dev_vdbg(&dev->pdev->dev, "%s-%s fifo flush\n",
_ep->name, DIR_STRING(ep));
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* flush endpoint buffer */
if (ep->ep_num == 0)
flush_bit = (1 << 16) | 1;
else if (is_in(ep))
flush_bit = 1 << (ep->ep_num + 16); /* TX */
else
flush_bit = 1 << ep->ep_num; /* RX */
/* wait until flush complete */
timeout = jiffies + FLUSH_TIMEOUT;
do {
writel(flush_bit, &dev->op_regs->endptflush);
while (readl(&dev->op_regs->endptflush)) {
if (time_after(jiffies, timeout)) {
dev_err(&dev->pdev->dev, "ep flush timeout\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
goto done;
}
cpu_relax();
}
} while (readl(&dev->op_regs->endptstat) & flush_bit);
done:
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* endpoints operations structure */
static const struct usb_ep_ops langwell_ep_ops = {
/* configure endpoint, making it usable */
.enable = langwell_ep_enable,
/* endpoint is no longer usable */
.disable = langwell_ep_disable,
/* allocate a request object to use with this endpoint */
.alloc_request = langwell_alloc_request,
/* free a request object */
.free_request = langwell_free_request,
/* queue (submits) an I/O requests to an endpoint */
.queue = langwell_ep_queue,
/* dequeue (cancels, unlinks) an I/O request from an endpoint */
.dequeue = langwell_ep_dequeue,
/* set the endpoint halt feature */
.set_halt = langwell_ep_set_halt,
/* set the halt feature and ignores clear requests */
.set_wedge = langwell_ep_set_wedge,
/* flush contents of a fifo */
.fifo_flush = langwell_ep_fifo_flush,
};
/*-------------------------------------------------------------------------*/
/* device controller usb_gadget_ops structure */
/* returns the current frame number */
static int langwell_get_frame(struct usb_gadget *_gadget)
{
struct langwell_udc *dev;
u16 retval;
if (!_gadget)
return -ENODEV;
dev = container_of(_gadget, struct langwell_udc, gadget);
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
retval = readl(&dev->op_regs->frindex) & FRINDEX_MASK;
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return retval;
}
/* enter or exit PHY low power state */
static void langwell_phy_low_power(struct langwell_udc *dev, bool flag)
{
u32 devlc;
u8 devlc_byte2;
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
devlc = readl(&dev->op_regs->devlc);
dev_vdbg(&dev->pdev->dev, "devlc = 0x%08x\n", devlc);
if (flag)
devlc |= LPM_PHCD;
else
devlc &= ~LPM_PHCD;
/* FIXME: workaround for Langwell A1/A2/A3 sighting */
devlc_byte2 = (devlc >> 16) & 0xff;
writeb(devlc_byte2, (u8 *)&dev->op_regs->devlc + 2);
devlc = readl(&dev->op_regs->devlc);
dev_vdbg(&dev->pdev->dev,
"%s PHY low power suspend, devlc = 0x%08x\n",
flag ? "enter" : "exit", devlc);
}
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* tries to wake up the host connected to this gadget */
static int langwell_wakeup(struct usb_gadget *_gadget)
{
struct langwell_udc *dev;
u32 portsc1;
unsigned long flags;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (!_gadget)
return 0;
dev = container_of(_gadget, struct langwell_udc, gadget);
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* remote wakeup feature not enabled by host */
if (!dev->remote_wakeup) {
dev_info(&dev->pdev->dev, "remote wakeup is disabled\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return -ENOTSUPP;
}
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
spin_lock_irqsave(&dev->lock, flags);
portsc1 = readl(&dev->op_regs->portsc1);
if (!(portsc1 & PORTS_SUSP)) {
spin_unlock_irqrestore(&dev->lock, flags);
return 0;
}
/* LPM L1 to L0 or legacy remote wakeup */
if (dev->lpm && dev->lpm_state == LPM_L1)
dev_info(&dev->pdev->dev, "LPM L1 to L0 remote wakeup\n");
else
dev_info(&dev->pdev->dev, "device remote wakeup\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* exit PHY low power suspend */
if (dev->pdev->device != 0x0829)
langwell_phy_low_power(dev, 0);
/* force port resume */
portsc1 |= PORTS_FPR;
writel(portsc1, &dev->op_regs->portsc1);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
spin_unlock_irqrestore(&dev->lock, flags);
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return 0;
}
/* notify controller that VBUS is powered or not */
static int langwell_vbus_session(struct usb_gadget *_gadget, int is_active)
{
struct langwell_udc *dev;
unsigned long flags;
u32 usbcmd;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (!_gadget)
return -ENODEV;
dev = container_of(_gadget, struct langwell_udc, gadget);
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
spin_lock_irqsave(&dev->lock, flags);
dev_vdbg(&dev->pdev->dev, "VBUS status: %s\n",
is_active ? "on" : "off");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev->vbus_active = (is_active != 0);
if (dev->driver && dev->softconnected && dev->vbus_active) {
usbcmd = readl(&dev->op_regs->usbcmd);
usbcmd |= CMD_RUNSTOP;
writel(usbcmd, &dev->op_regs->usbcmd);
} else {
usbcmd = readl(&dev->op_regs->usbcmd);
usbcmd &= ~CMD_RUNSTOP;
writel(usbcmd, &dev->op_regs->usbcmd);
}
spin_unlock_irqrestore(&dev->lock, flags);
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return 0;
}
/* constrain controller's VBUS power usage */
static int langwell_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
{
struct langwell_udc *dev;
if (!_gadget)
return -ENODEV;
dev = container_of(_gadget, struct langwell_udc, gadget);
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (dev->transceiver) {
dev_vdbg(&dev->pdev->dev, "usb_phy_set_power\n");
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
return usb_phy_set_power(dev->transceiver, mA);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return -ENOTSUPP;
}
/* D+ pullup, software-controlled connect/disconnect to USB host */
static int langwell_pullup(struct usb_gadget *_gadget, int is_on)
{
struct langwell_udc *dev;
u32 usbcmd;
unsigned long flags;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (!_gadget)
return -ENODEV;
dev = container_of(_gadget, struct langwell_udc, gadget);
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
spin_lock_irqsave(&dev->lock, flags);
dev->softconnected = (is_on != 0);
if (dev->driver && dev->softconnected && dev->vbus_active) {
usbcmd = readl(&dev->op_regs->usbcmd);
usbcmd |= CMD_RUNSTOP;
writel(usbcmd, &dev->op_regs->usbcmd);
} else {
usbcmd = readl(&dev->op_regs->usbcmd);
usbcmd &= ~CMD_RUNSTOP;
writel(usbcmd, &dev->op_regs->usbcmd);
}
spin_unlock_irqrestore(&dev->lock, flags);
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return 0;
}
static int langwell_start(struct usb_gadget *g,
struct usb_gadget_driver *driver);
static int langwell_stop(struct usb_gadget *g,
struct usb_gadget_driver *driver);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* device controller usb_gadget_ops structure */
static const struct usb_gadget_ops langwell_ops = {
/* returns the current frame number */
.get_frame = langwell_get_frame,
/* tries to wake up the host connected to this gadget */
.wakeup = langwell_wakeup,
/* set the device selfpowered feature, always selfpowered */
/* .set_selfpowered = langwell_set_selfpowered, */
/* notify controller that VBUS is powered or not */
.vbus_session = langwell_vbus_session,
/* constrain controller's VBUS power usage */
.vbus_draw = langwell_vbus_draw,
/* D+ pullup, software-controlled connect/disconnect to USB host */
.pullup = langwell_pullup,
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
.udc_start = langwell_start,
.udc_stop = langwell_stop,
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
};
/*-------------------------------------------------------------------------*/
/* device controller operations */
/* reset device controller */
static int langwell_udc_reset(struct langwell_udc *dev)
{
u32 usbcmd, usbmode, devlc, endpointlistaddr;
u8 devlc_byte0, devlc_byte2;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
unsigned long timeout;
if (!dev)
return -EINVAL;
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* set controller to stop state */
usbcmd = readl(&dev->op_regs->usbcmd);
usbcmd &= ~CMD_RUNSTOP;
writel(usbcmd, &dev->op_regs->usbcmd);
/* reset device controller */
usbcmd = readl(&dev->op_regs->usbcmd);
usbcmd |= CMD_RST;
writel(usbcmd, &dev->op_regs->usbcmd);
/* wait for reset to complete */
timeout = jiffies + RESET_TIMEOUT;
while (readl(&dev->op_regs->usbcmd) & CMD_RST) {
if (time_after(jiffies, timeout)) {
dev_err(&dev->pdev->dev, "device reset timeout\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return -ETIMEDOUT;
}
cpu_relax();
}
/* set controller to device mode */
usbmode = readl(&dev->op_regs->usbmode);
usbmode |= MODE_DEVICE;
/* turn setup lockout off, require setup tripwire in usbcmd */
usbmode |= MODE_SLOM;
writel(usbmode, &dev->op_regs->usbmode);
usbmode = readl(&dev->op_regs->usbmode);
dev_vdbg(&dev->pdev->dev, "usbmode=0x%08x\n", usbmode);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* Write-Clear setup status */
writel(0, &dev->op_regs->usbsts);
/* if support USB LPM, ACK all LPM token */
if (dev->lpm) {
devlc = readl(&dev->op_regs->devlc);
dev_vdbg(&dev->pdev->dev, "devlc = 0x%08x\n", devlc);
/* FIXME: workaround for Langwell A1/A2/A3 sighting */
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
devlc &= ~LPM_STL; /* don't STALL LPM token */
devlc &= ~LPM_NYT_ACK; /* ACK LPM token */
devlc_byte0 = devlc & 0xff;
devlc_byte2 = (devlc >> 16) & 0xff;
writeb(devlc_byte0, (u8 *)&dev->op_regs->devlc);
writeb(devlc_byte2, (u8 *)&dev->op_regs->devlc + 2);
devlc = readl(&dev->op_regs->devlc);
dev_vdbg(&dev->pdev->dev,
"ACK LPM token, devlc = 0x%08x\n", devlc);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* fill endpointlistaddr register */
endpointlistaddr = dev->ep_dqh_dma;
endpointlistaddr &= ENDPOINTLISTADDR_MASK;
writel(endpointlistaddr, &dev->op_regs->endpointlistaddr);
dev_vdbg(&dev->pdev->dev,
"dQH base (vir: %p, phy: 0x%08x), endpointlistaddr=0x%08x\n",
dev->ep_dqh, endpointlistaddr,
readl(&dev->op_regs->endpointlistaddr));
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return 0;
}
/* reinitialize device controller endpoints */
static int eps_reinit(struct langwell_udc *dev)
{
struct langwell_ep *ep;
char name[14];
int i;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* initialize ep0 */
ep = &dev->ep[0];
ep->dev = dev;
strncpy(ep->name, "ep0", sizeof(ep->name));
ep->ep.name = ep->name;
ep->ep.ops = &langwell_ep_ops;
ep->stopped = 0;
ep->ep.maxpacket = EP0_MAX_PKT_SIZE;
ep->ep_num = 0;
ep->desc = &langwell_ep0_desc;
INIT_LIST_HEAD(&ep->queue);
ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
/* initialize other endpoints */
for (i = 2; i < dev->ep_max; i++) {
ep = &dev->ep[i];
if (i % 2)
snprintf(name, sizeof(name), "ep%din", i / 2);
else
snprintf(name, sizeof(name), "ep%dout", i / 2);
ep->dev = dev;
strncpy(ep->name, name, sizeof(ep->name));
ep->ep.name = ep->name;
ep->ep.ops = &langwell_ep_ops;
ep->stopped = 0;
ep->ep.maxpacket = (unsigned short) ~0;
ep->ep_num = i / 2;
INIT_LIST_HEAD(&ep->queue);
list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
}
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return 0;
}
/* enable interrupt and set controller to run state */
static void langwell_udc_start(struct langwell_udc *dev)
{
u32 usbintr, usbcmd;
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* enable interrupts */
usbintr = INTR_ULPIE /* ULPI */
| INTR_SLE /* suspend */
/* | INTR_SRE SOF received */
| INTR_URE /* USB reset */
| INTR_AAE /* async advance */
| INTR_SEE /* system error */
| INTR_FRE /* frame list rollover */
| INTR_PCE /* port change detect */
| INTR_UEE /* USB error interrupt */
| INTR_UE; /* USB interrupt */
writel(usbintr, &dev->op_regs->usbintr);
/* clear stopped bit */
dev->stopped = 0;
/* set controller to run */
usbcmd = readl(&dev->op_regs->usbcmd);
usbcmd |= CMD_RUNSTOP;
writel(usbcmd, &dev->op_regs->usbcmd);
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* disable interrupt and set controller to stop state */
static void langwell_udc_stop(struct langwell_udc *dev)
{
u32 usbcmd;
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* disable all interrupts */
writel(0, &dev->op_regs->usbintr);
/* set stopped bit */
dev->stopped = 1;
/* set controller to stop state */
usbcmd = readl(&dev->op_regs->usbcmd);
usbcmd &= ~CMD_RUNSTOP;
writel(usbcmd, &dev->op_regs->usbcmd);
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* stop all USB activities */
static void stop_activity(struct langwell_udc *dev)
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
{
struct langwell_ep *ep;
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
nuke(&dev->ep[0], -ESHUTDOWN);
list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
nuke(ep, -ESHUTDOWN);
}
/* report disconnect; the driver is already quiesced */
if (dev->driver) {
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
spin_unlock(&dev->lock);
dev->driver->disconnect(&dev->gadget);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
spin_lock(&dev->lock);
}
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/*-------------------------------------------------------------------------*/
/* device "function" sysfs attribute file */
static ssize_t show_function(struct device *_dev,
struct device_attribute *attr, char *buf)
{
struct langwell_udc *dev = dev_get_drvdata(_dev);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (!dev->driver || !dev->driver->function
|| strlen(dev->driver->function) > PAGE_SIZE)
return 0;
return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function);
}
static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
static inline enum usb_device_speed lpm_device_speed(u32 reg)
{
switch (LPM_PSPD(reg)) {
case LPM_SPEED_HIGH:
return USB_SPEED_HIGH;
case LPM_SPEED_FULL:
return USB_SPEED_FULL;
case LPM_SPEED_LOW:
return USB_SPEED_LOW;
default:
return USB_SPEED_UNKNOWN;
}
}
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* device "langwell_udc" sysfs attribute file */
static ssize_t show_langwell_udc(struct device *_dev,
struct device_attribute *attr, char *buf)
{
struct langwell_udc *dev = dev_get_drvdata(_dev);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
struct langwell_request *req;
struct langwell_ep *ep = NULL;
char *next;
unsigned size;
unsigned t;
unsigned i;
unsigned long flags;
u32 tmp_reg;
next = buf;
size = PAGE_SIZE;
spin_lock_irqsave(&dev->lock, flags);
/* driver basic information */
t = scnprintf(next, size,
DRIVER_DESC "\n"
"%s version: %s\n"
"Gadget driver: %s\n\n",
driver_name, DRIVER_VERSION,
dev->driver ? dev->driver->driver.name : "(none)");
size -= t;
next += t;
/* device registers */
tmp_reg = readl(&dev->op_regs->usbcmd);
t = scnprintf(next, size,
"USBCMD reg:\n"
"SetupTW: %d\n"
"Run/Stop: %s\n\n",
(tmp_reg & CMD_SUTW) ? 1 : 0,
(tmp_reg & CMD_RUNSTOP) ? "Run" : "Stop");
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->usbsts);
t = scnprintf(next, size,
"USB Status Reg:\n"
"Device Suspend: %d\n"
"Reset Received: %d\n"
"System Error: %s\n"
"USB Error Interrupt: %s\n\n",
(tmp_reg & STS_SLI) ? 1 : 0,
(tmp_reg & STS_URI) ? 1 : 0,
(tmp_reg & STS_SEI) ? "Error" : "No error",
(tmp_reg & STS_UEI) ? "Error detected" : "No error");
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->usbintr);
t = scnprintf(next, size,
"USB Intrrupt Enable Reg:\n"
"Sleep Enable: %d\n"
"SOF Received Enable: %d\n"
"Reset Enable: %d\n"
"System Error Enable: %d\n"
"Port Change Dectected Enable: %d\n"
"USB Error Intr Enable: %d\n"
"USB Intr Enable: %d\n\n",
(tmp_reg & INTR_SLE) ? 1 : 0,
(tmp_reg & INTR_SRE) ? 1 : 0,
(tmp_reg & INTR_URE) ? 1 : 0,
(tmp_reg & INTR_SEE) ? 1 : 0,
(tmp_reg & INTR_PCE) ? 1 : 0,
(tmp_reg & INTR_UEE) ? 1 : 0,
(tmp_reg & INTR_UE) ? 1 : 0);
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->frindex);
t = scnprintf(next, size,
"USB Frame Index Reg:\n"
"Frame Number is 0x%08x\n\n",
(tmp_reg & FRINDEX_MASK));
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->deviceaddr);
t = scnprintf(next, size,
"USB Device Address Reg:\n"
"Device Addr is 0x%x\n\n",
USBADR(tmp_reg));
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->endpointlistaddr);
t = scnprintf(next, size,
"USB Endpoint List Address Reg:\n"
"Endpoint List Pointer is 0x%x\n\n",
EPBASE(tmp_reg));
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->portsc1);
t = scnprintf(next, size,
"USB Port Status & Control Reg:\n"
"Port Reset: %s\n"
"Port Suspend Mode: %s\n"
"Over-current Change: %s\n"
"Port Enable/Disable Change: %s\n"
"Port Enabled/Disabled: %s\n"
"Current Connect Status: %s\n"
"LPM Suspend Status: %s\n\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
(tmp_reg & PORTS_PR) ? "Reset" : "Not Reset",
(tmp_reg & PORTS_SUSP) ? "Suspend " : "Not Suspend",
(tmp_reg & PORTS_OCC) ? "Detected" : "No",
(tmp_reg & PORTS_PEC) ? "Changed" : "Not Changed",
(tmp_reg & PORTS_PE) ? "Enable" : "Not Correct",
(tmp_reg & PORTS_CCS) ? "Attached" : "Not Attached",
(tmp_reg & PORTS_SLP) ? "LPM L1" : "LPM L0");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->devlc);
t = scnprintf(next, size,
"Device LPM Control Reg:\n"
"Parallel Transceiver : %d\n"
"Serial Transceiver : %d\n"
"Port Speed: %s\n"
"Port Force Full Speed Connenct: %s\n"
"PHY Low Power Suspend Clock: %s\n"
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
"BmAttributes: %d\n\n",
LPM_PTS(tmp_reg),
(tmp_reg & LPM_STS) ? 1 : 0,
usb_speed_string(lpm_device_speed(tmp_reg)),
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
(tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
(tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
LPM_BA(tmp_reg));
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->usbmode);
t = scnprintf(next, size,
"USB Mode Reg:\n"
"Controller Mode is : %s\n\n", ({
char *s;
switch (MODE_CM(tmp_reg)) {
case MODE_IDLE:
s = "Idle"; break;
case MODE_DEVICE:
s = "Device Controller"; break;
case MODE_HOST:
s = "Host Controller"; break;
default:
s = "None"; break;
}
s;
}));
size -= t;
next += t;
tmp_reg = readl(&dev->op_regs->endptsetupstat);
t = scnprintf(next, size,
"Endpoint Setup Status Reg:\n"
"SETUP on ep 0x%04x\n\n",
tmp_reg & SETUPSTAT_MASK);
size -= t;
next += t;
for (i = 0; i < dev->ep_max / 2; i++) {
tmp_reg = readl(&dev->op_regs->endptctrl[i]);
t = scnprintf(next, size, "EP Ctrl Reg [%d]: 0x%08x\n",
i, tmp_reg);
size -= t;
next += t;
}
tmp_reg = readl(&dev->op_regs->endptprime);
t = scnprintf(next, size, "EP Prime Reg: 0x%08x\n\n", tmp_reg);
size -= t;
next += t;
/* langwell_udc, langwell_ep, langwell_request structure information */
ep = &dev->ep[0];
t = scnprintf(next, size, "%s MaxPacketSize: 0x%x, ep_num: %d\n",
ep->ep.name, ep->ep.maxpacket, ep->ep_num);
size -= t;
next += t;
if (list_empty(&ep->queue)) {
t = scnprintf(next, size, "its req queue is empty\n\n");
size -= t;
next += t;
} else {
list_for_each_entry(req, &ep->queue, queue) {
t = scnprintf(next, size,
"req %p actual 0x%x length 0x%x buf %p\n",
&req->req, req->req.actual,
req->req.length, req->req.buf);
size -= t;
next += t;
}
}
/* other gadget->eplist ep */
list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
if (ep->desc) {
t = scnprintf(next, size,
"\n%s MaxPacketSize: 0x%x, "
"ep_num: %d\n",
ep->ep.name, ep->ep.maxpacket,
ep->ep_num);
size -= t;
next += t;
if (list_empty(&ep->queue)) {
t = scnprintf(next, size,
"its req queue is empty\n\n");
size -= t;
next += t;
} else {
list_for_each_entry(req, &ep->queue, queue) {
t = scnprintf(next, size,
"req %p actual 0x%x length "
"0x%x buf %p\n",
&req->req, req->req.actual,
req->req.length, req->req.buf);
size -= t;
next += t;
}
}
}
}
spin_unlock_irqrestore(&dev->lock, flags);
return PAGE_SIZE - size;
}
static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL);
/* device "remote_wakeup" sysfs attribute file */
static ssize_t store_remote_wakeup(struct device *_dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct langwell_udc *dev = dev_get_drvdata(_dev);
unsigned long flags;
ssize_t rc = count;
if (count > 2)
return -EINVAL;
if (count > 0 && buf[count-1] == '\n')
((char *) buf)[count-1] = 0;
if (buf[0] != '1')
return -EINVAL;
/* force remote wakeup enabled in case gadget driver doesn't support */
spin_lock_irqsave(&dev->lock, flags);
dev->remote_wakeup = 1;
dev->dev_status |= (1 << USB_DEVICE_REMOTE_WAKEUP);
spin_unlock_irqrestore(&dev->lock, flags);
langwell_wakeup(&dev->gadget);
return rc;
}
static DEVICE_ATTR(remote_wakeup, S_IWUSR, NULL, store_remote_wakeup);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/*-------------------------------------------------------------------------*/
/*
* when a driver is successfully registered, it will receive
* control requests including set_configuration(), which enables
* non-control requests. then usb traffic follows until a
* disconnect is reported. then a host may connect again, or
* the driver might get unbound.
*/
static int langwell_start(struct usb_gadget *g,
struct usb_gadget_driver *driver)
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
{
struct langwell_udc *dev = gadget_to_langwell(g);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
unsigned long flags;
int retval;
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
spin_lock_irqsave(&dev->lock, flags);
/* hook up the driver ... */
driver->driver.bus = NULL;
dev->driver = driver;
dev->gadget.dev.driver = &driver->driver;
spin_unlock_irqrestore(&dev->lock, flags);
retval = device_create_file(&dev->pdev->dev, &dev_attr_function);
if (retval)
goto err;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev->usb_state = USB_STATE_ATTACHED;
dev->ep0_state = WAIT_FOR_SETUP;
dev->ep0_dir = USB_DIR_OUT;
/* enable interrupt and set controller to run state */
if (dev->got_irq)
langwell_udc_start(dev);
dev_vdbg(&dev->pdev->dev,
"After langwell_udc_start(), print all registers:\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
print_all_registers(dev);
dev_info(&dev->pdev->dev, "register driver: %s\n",
driver->driver.name);
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return 0;
err:
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return retval;
}
/* unregister gadget driver */
static int langwell_stop(struct usb_gadget *g,
struct usb_gadget_driver *driver)
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
{
struct langwell_udc *dev = gadget_to_langwell(g);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
unsigned long flags;
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* exit PHY low power suspend */
if (dev->pdev->device != 0x0829)
langwell_phy_low_power(dev, 0);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* unbind OTG transceiver */
if (dev->transceiver)
(void)otg_set_peripheral(dev->transceiver->otg, 0);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* disable interrupt and set controller to stop state */
langwell_udc_stop(dev);
dev->usb_state = USB_STATE_ATTACHED;
dev->ep0_state = WAIT_FOR_SETUP;
dev->ep0_dir = USB_DIR_OUT;
spin_lock_irqsave(&dev->lock, flags);
/* stop all usb activities */
dev->gadget.speed = USB_SPEED_UNKNOWN;
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
stop_activity(dev);
spin_unlock_irqrestore(&dev->lock, flags);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
device_remove_file(&dev->pdev->dev, &dev_attr_function);
dev_info(&dev->pdev->dev, "unregistered driver '%s'\n",
driver->driver.name);
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return 0;
}
/*-------------------------------------------------------------------------*/
/*
* setup tripwire is used as a semaphore to ensure that the setup data
* payload is extracted from a dQH without being corrupted
*/
static void setup_tripwire(struct langwell_udc *dev)
{
u32 usbcmd,
endptsetupstat;
unsigned long timeout;
struct langwell_dqh *dqh;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* ep0 OUT dQH */
dqh = &dev->ep_dqh[EP_DIR_OUT];
/* Write-Clear endptsetupstat */
endptsetupstat = readl(&dev->op_regs->endptsetupstat);
writel(endptsetupstat, &dev->op_regs->endptsetupstat);
/* wait until endptsetupstat is cleared */
timeout = jiffies + SETUPSTAT_TIMEOUT;
while (readl(&dev->op_regs->endptsetupstat)) {
if (time_after(jiffies, timeout)) {
dev_err(&dev->pdev->dev, "setup_tripwire timeout\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
break;
}
cpu_relax();
}
/* while a hazard exists when setup packet arrives */
do {
/* set setup tripwire bit */
usbcmd = readl(&dev->op_regs->usbcmd);
writel(usbcmd | CMD_SUTW, &dev->op_regs->usbcmd);
/* copy the setup packet to local buffer */
memcpy(&dev->local_setup_buff, &dqh->dqh_setup, 8);
} while (!(readl(&dev->op_regs->usbcmd) & CMD_SUTW));
/* Write-Clear setup tripwire bit */
usbcmd = readl(&dev->op_regs->usbcmd);
writel(usbcmd & ~CMD_SUTW, &dev->op_regs->usbcmd);
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* protocol ep0 stall, will automatically be cleared on new transaction */
static void ep0_stall(struct langwell_udc *dev)
{
u32 endptctrl;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* set TX and RX to stall */
endptctrl = readl(&dev->op_regs->endptctrl[0]);
endptctrl |= EPCTRL_TXS | EPCTRL_RXS;
writel(endptctrl, &dev->op_regs->endptctrl[0]);
/* update ep0 state */
dev->ep0_state = WAIT_FOR_SETUP;
dev->ep0_dir = USB_DIR_OUT;
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* PRIME a status phase for ep0 */
static int prime_status_phase(struct langwell_udc *dev, int dir)
{
struct langwell_request *req;
struct langwell_ep *ep;
int status = 0;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (dir == EP_DIR_IN)
dev->ep0_dir = USB_DIR_IN;
else
dev->ep0_dir = USB_DIR_OUT;
ep = &dev->ep[0];
dev->ep0_state = WAIT_FOR_OUT_STATUS;
req = dev->status_req;
req->ep = ep;
req->req.length = 0;
req->req.status = -EINPROGRESS;
req->req.actual = 0;
req->req.complete = NULL;
req->dtd_count = 0;
if (!req_to_dtd(req))
status = queue_dtd(ep, req);
else
return -ENOMEM;
if (status)
dev_err(&dev->pdev->dev, "can't queue ep0 status request\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
list_add_tail(&req->queue, &ep->queue);
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return status;
}
/* SET_ADDRESS request routine */
static void set_address(struct langwell_udc *dev, u16 value,
u16 index, u16 length)
{
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* save the new address to device struct */
dev->dev_addr = (u8) value;
dev_vdbg(&dev->pdev->dev, "dev->dev_addr = %d\n", dev->dev_addr);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* update usb state */
dev->usb_state = USB_STATE_ADDRESS;
/* STATUS phase */
if (prime_status_phase(dev, EP_DIR_IN))
ep0_stall(dev);
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* return endpoint by windex */
static struct langwell_ep *get_ep_by_windex(struct langwell_udc *dev,
u16 wIndex)
{
struct langwell_ep *ep;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
return &dev->ep[0];
list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
u8 bEndpointAddress;
if (!ep->desc)
continue;
bEndpointAddress = ep->desc->bEndpointAddress;
if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
continue;
if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
== (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
return ep;
}
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return NULL;
}
/* return whether endpoint is stalled, 0: not stalled; 1: stalled */
static int ep_is_stall(struct langwell_ep *ep)
{
struct langwell_udc *dev = ep->dev;
u32 endptctrl;
int retval;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
endptctrl = readl(&dev->op_regs->endptctrl[ep->ep_num]);
if (is_in(ep))
retval = endptctrl & EPCTRL_TXS ? 1 : 0;
else
retval = endptctrl & EPCTRL_RXS ? 1 : 0;
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return retval;
}
/* GET_STATUS request routine */
static void get_status(struct langwell_udc *dev, u8 request_type, u16 value,
u16 index, u16 length)
{
struct langwell_request *req;
struct langwell_ep *ep;
u16 status_data = 0; /* 16 bits cpu view status data */
int status = 0;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
ep = &dev->ep[0];
if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
/* get device status */
status_data = dev->dev_status;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
/* get interface status */
status_data = 0;
} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
/* get endpoint status */
struct langwell_ep *epn;
epn = get_ep_by_windex(dev, index);
/* stall if endpoint doesn't exist */
if (!epn)
goto stall;
status_data = ep_is_stall(epn) << USB_ENDPOINT_HALT;
}
dev_dbg(&dev->pdev->dev, "get status data: 0x%04x\n", status_data);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev->ep0_dir = USB_DIR_IN;
/* borrow the per device status_req */
req = dev->status_req;
/* fill in the reqest structure */
*((u16 *) req->req.buf) = cpu_to_le16(status_data);
req->ep = ep;
req->req.length = 2;
req->req.status = -EINPROGRESS;
req->req.actual = 0;
req->req.complete = NULL;
req->dtd_count = 0;
/* prime the data phase */
if (!req_to_dtd(req))
status = queue_dtd(ep, req);
else /* no mem */
goto stall;
if (status) {
dev_err(&dev->pdev->dev,
"response error on GET_STATUS request\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
goto stall;
}
list_add_tail(&req->queue, &ep->queue);
dev->ep0_state = DATA_STATE_XMIT;
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return;
stall:
ep0_stall(dev);
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* setup packet interrupt handler */
static void handle_setup_packet(struct langwell_udc *dev,
struct usb_ctrlrequest *setup)
{
u16 wValue = le16_to_cpu(setup->wValue);
u16 wIndex = le16_to_cpu(setup->wIndex);
u16 wLength = le16_to_cpu(setup->wLength);
u32 portsc1;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* ep0 fifo flush */
nuke(&dev->ep[0], -ESHUTDOWN);
dev_dbg(&dev->pdev->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
setup->bRequestType, setup->bRequest,
wValue, wIndex, wLength);
/* RNDIS gadget delegate */
if ((setup->bRequestType == 0x21) && (setup->bRequest == 0x00)) {
/* USB_CDC_SEND_ENCAPSULATED_COMMAND */
goto delegate;
}
/* USB_CDC_GET_ENCAPSULATED_RESPONSE */
if ((setup->bRequestType == 0xa1) && (setup->bRequest == 0x01)) {
/* USB_CDC_GET_ENCAPSULATED_RESPONSE */
goto delegate;
}
/* We process some stardard setup requests here */
switch (setup->bRequest) {
case USB_REQ_GET_STATUS:
dev_dbg(&dev->pdev->dev, "SETUP: USB_REQ_GET_STATUS\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* get status, DATA and STATUS phase */
if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
!= (USB_DIR_IN | USB_TYPE_STANDARD))
break;
get_status(dev, setup->bRequestType, wValue, wIndex, wLength);
goto end;
case USB_REQ_SET_ADDRESS:
dev_dbg(&dev->pdev->dev, "SETUP: USB_REQ_SET_ADDRESS\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* STATUS phase */
if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
| USB_RECIP_DEVICE))
break;
set_address(dev, wValue, wIndex, wLength);
goto end;
case USB_REQ_CLEAR_FEATURE:
case USB_REQ_SET_FEATURE:
/* STATUS phase */
{
int rc = -EOPNOTSUPP;
if (setup->bRequest == USB_REQ_SET_FEATURE)
dev_dbg(&dev->pdev->dev,
"SETUP: USB_REQ_SET_FEATURE\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
else if (setup->bRequest == USB_REQ_CLEAR_FEATURE)
dev_dbg(&dev->pdev->dev,
"SETUP: USB_REQ_CLEAR_FEATURE\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
== (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
struct langwell_ep *epn;
epn = get_ep_by_windex(dev, wIndex);
/* stall if endpoint doesn't exist */
if (!epn) {
ep0_stall(dev);
goto end;
}
if (wValue != 0 || wLength != 0
|| epn->ep_num > dev->ep_max)
break;
spin_unlock(&dev->lock);
rc = langwell_ep_set_halt(&epn->ep,
(setup->bRequest == USB_REQ_SET_FEATURE)
? 1 : 0);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
spin_lock(&dev->lock);
} else if ((setup->bRequestType & (USB_RECIP_MASK
| USB_TYPE_MASK)) == (USB_RECIP_DEVICE
| USB_TYPE_STANDARD)) {
rc = 0;
switch (wValue) {
case USB_DEVICE_REMOTE_WAKEUP:
if (setup->bRequest == USB_REQ_SET_FEATURE) {
dev->remote_wakeup = 1;
dev->dev_status |= (1 << wValue);
} else {
dev->remote_wakeup = 0;
dev->dev_status &= ~(1 << wValue);
}
break;
case USB_DEVICE_TEST_MODE:
dev_dbg(&dev->pdev->dev, "SETUP: TEST MODE\n");
if ((wIndex & 0xff) ||
(dev->gadget.speed != USB_SPEED_HIGH))
ep0_stall(dev);
switch (wIndex >> 8) {
case TEST_J:
case TEST_K:
case TEST_SE0_NAK:
case TEST_PACKET:
case TEST_FORCE_EN:
if (prime_status_phase(dev, EP_DIR_IN))
ep0_stall(dev);
portsc1 = readl(&dev->op_regs->portsc1);
portsc1 |= (wIndex & 0xf00) << 8;
writel(portsc1, &dev->op_regs->portsc1);
goto end;
default:
rc = -EOPNOTSUPP;
}
break;
default:
rc = -EOPNOTSUPP;
break;
}
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (!gadget_is_otg(&dev->gadget))
break;
else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE)
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev->gadget.b_hnp_enable = 1;
else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev->gadget.a_hnp_support = 1;
else if (setup->bRequest ==
USB_DEVICE_A_ALT_HNP_SUPPORT)
dev->gadget.a_alt_hnp_support = 1;
else
break;
} else
break;
if (rc == 0) {
if (prime_status_phase(dev, EP_DIR_IN))
ep0_stall(dev);
}
goto end;
}
case USB_REQ_GET_DESCRIPTOR:
dev_dbg(&dev->pdev->dev,
"SETUP: USB_REQ_GET_DESCRIPTOR\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
goto delegate;
case USB_REQ_SET_DESCRIPTOR:
dev_dbg(&dev->pdev->dev,
"SETUP: USB_REQ_SET_DESCRIPTOR unsupported\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
goto delegate;
case USB_REQ_GET_CONFIGURATION:
dev_dbg(&dev->pdev->dev,
"SETUP: USB_REQ_GET_CONFIGURATION\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
goto delegate;
case USB_REQ_SET_CONFIGURATION:
dev_dbg(&dev->pdev->dev,
"SETUP: USB_REQ_SET_CONFIGURATION\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
goto delegate;
case USB_REQ_GET_INTERFACE:
dev_dbg(&dev->pdev->dev,
"SETUP: USB_REQ_GET_INTERFACE\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
goto delegate;
case USB_REQ_SET_INTERFACE:
dev_dbg(&dev->pdev->dev,
"SETUP: USB_REQ_SET_INTERFACE\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
goto delegate;
case USB_REQ_SYNCH_FRAME:
dev_dbg(&dev->pdev->dev,
"SETUP: USB_REQ_SYNCH_FRAME unsupported\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
goto delegate;
default:
/* delegate USB standard requests to the gadget driver */
goto delegate;
delegate:
/* USB requests handled by gadget */
if (wLength) {
/* DATA phase from gadget, STATUS phase from udc */
dev->ep0_dir = (setup->bRequestType & USB_DIR_IN)
? USB_DIR_IN : USB_DIR_OUT;
dev_vdbg(&dev->pdev->dev,
"dev->ep0_dir = 0x%x, wLength = %d\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev->ep0_dir, wLength);
spin_unlock(&dev->lock);
if (dev->driver->setup(&dev->gadget,
&dev->local_setup_buff) < 0)
ep0_stall(dev);
spin_lock(&dev->lock);
dev->ep0_state = (setup->bRequestType & USB_DIR_IN)
? DATA_STATE_XMIT : DATA_STATE_RECV;
} else {
/* no DATA phase, IN STATUS phase from gadget */
dev->ep0_dir = USB_DIR_IN;
dev_vdbg(&dev->pdev->dev,
"dev->ep0_dir = 0x%x, wLength = %d\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev->ep0_dir, wLength);
spin_unlock(&dev->lock);
if (dev->driver->setup(&dev->gadget,
&dev->local_setup_buff) < 0)
ep0_stall(dev);
spin_lock(&dev->lock);
dev->ep0_state = WAIT_FOR_OUT_STATUS;
}
break;
}
end:
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* transfer completion, process endpoint request and free the completed dTDs
* for this request
*/
static int process_ep_req(struct langwell_udc *dev, int index,
struct langwell_request *curr_req)
{
struct langwell_dtd *curr_dtd;
struct langwell_dqh *curr_dqh;
int td_complete, actual, remaining_length;
int i, dir;
u8 dtd_status = 0;
int retval = 0;
curr_dqh = &dev->ep_dqh[index];
dir = index % 2;
curr_dtd = curr_req->head;
td_complete = 0;
actual = curr_req->req.length;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
for (i = 0; i < curr_req->dtd_count; i++) {
/* command execution states by dTD */
dtd_status = curr_dtd->dtd_status;
barrier();
remaining_length = le16_to_cpu(curr_dtd->dtd_total);
actual -= remaining_length;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (!dtd_status) {
/* transfers completed successfully */
if (!remaining_length) {
td_complete++;
dev_vdbg(&dev->pdev->dev,
"dTD transmitted successfully\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
} else {
if (dir) {
dev_vdbg(&dev->pdev->dev,
"TX dTD remains data\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
retval = -EPROTO;
break;
} else {
td_complete++;
break;
}
}
} else {
/* transfers completed with errors */
if (dtd_status & DTD_STS_ACTIVE) {
dev_dbg(&dev->pdev->dev,
"dTD status ACTIVE dQH[%d]\n", index);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
retval = 1;
return retval;
} else if (dtd_status & DTD_STS_HALTED) {
dev_err(&dev->pdev->dev,
"dTD error %08x dQH[%d]\n",
dtd_status, index);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* clear the errors and halt condition */
curr_dqh->dtd_status = 0;
retval = -EPIPE;
break;
} else if (dtd_status & DTD_STS_DBE) {
dev_dbg(&dev->pdev->dev,
"data buffer (overflow) error\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
retval = -EPROTO;
break;
} else if (dtd_status & DTD_STS_TRE) {
dev_dbg(&dev->pdev->dev,
"transaction(ISO) error\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
retval = -EILSEQ;
break;
} else
dev_err(&dev->pdev->dev,
"unknown error (0x%x)!\n",
dtd_status);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
if (i != curr_req->dtd_count - 1)
curr_dtd = (struct langwell_dtd *)
curr_dtd->next_dtd_virt;
}
if (retval)
return retval;
curr_req->req.actual = actual;
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return 0;
}
/* complete DATA or STATUS phase of ep0 prime status phase if needed */
static void ep0_req_complete(struct langwell_udc *dev,
struct langwell_ep *ep0, struct langwell_request *req)
{
u32 new_addr;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (dev->usb_state == USB_STATE_ADDRESS) {
/* set the new address */
new_addr = (u32)dev->dev_addr;
writel(new_addr << USBADR_SHIFT, &dev->op_regs->deviceaddr);
new_addr = USBADR(readl(&dev->op_regs->deviceaddr));
dev_vdbg(&dev->pdev->dev, "new_addr = %d\n", new_addr);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
done(ep0, req, 0);
switch (dev->ep0_state) {
case DATA_STATE_XMIT:
/* receive status phase */
if (prime_status_phase(dev, EP_DIR_OUT))
ep0_stall(dev);
break;
case DATA_STATE_RECV:
/* send status phase */
if (prime_status_phase(dev, EP_DIR_IN))
ep0_stall(dev);
break;
case WAIT_FOR_OUT_STATUS:
dev->ep0_state = WAIT_FOR_SETUP;
break;
case WAIT_FOR_SETUP:
dev_err(&dev->pdev->dev, "unexpect ep0 packets\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
break;
default:
ep0_stall(dev);
break;
}
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* USB transfer completion interrupt */
static void handle_trans_complete(struct langwell_udc *dev)
{
u32 complete_bits;
int i, ep_num, dir, bit_mask, status;
struct langwell_ep *epn;
struct langwell_request *curr_req, *temp_req;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
complete_bits = readl(&dev->op_regs->endptcomplete);
dev_vdbg(&dev->pdev->dev, "endptcomplete register: 0x%08x\n",
complete_bits);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* Write-Clear the bits in endptcomplete register */
writel(complete_bits, &dev->op_regs->endptcomplete);
if (!complete_bits) {
dev_dbg(&dev->pdev->dev, "complete_bits = 0\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
goto done;
}
for (i = 0; i < dev->ep_max; i++) {
ep_num = i / 2;
dir = i % 2;
bit_mask = 1 << (ep_num + 16 * dir);
if (!(complete_bits & bit_mask))
continue;
/* ep0 */
if (i == 1)
epn = &dev->ep[0];
else
epn = &dev->ep[i];
if (epn->name == NULL) {
dev_warn(&dev->pdev->dev, "invalid endpoint\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
continue;
}
if (i < 2)
/* ep0 in and out */
dev_dbg(&dev->pdev->dev, "%s-%s transfer completed\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
epn->name,
is_in(epn) ? "in" : "out");
else
dev_dbg(&dev->pdev->dev, "%s transfer completed\n",
epn->name);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* process the req queue until an uncomplete request */
list_for_each_entry_safe(curr_req, temp_req,
&epn->queue, queue) {
status = process_ep_req(dev, i, curr_req);
dev_vdbg(&dev->pdev->dev, "%s req status: %d\n",
epn->name, status);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (status)
break;
/* write back status to req */
curr_req->req.status = status;
/* ep0 request completion */
if (ep_num == 0) {
ep0_req_complete(dev, epn, curr_req);
break;
} else {
done(epn, curr_req, status);
}
}
}
done:
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* port change detect interrupt handler */
static void handle_port_change(struct langwell_udc *dev)
{
u32 portsc1, devlc;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (dev->bus_reset)
dev->bus_reset = 0;
portsc1 = readl(&dev->op_regs->portsc1);
devlc = readl(&dev->op_regs->devlc);
dev_vdbg(&dev->pdev->dev, "portsc1 = 0x%08x, devlc = 0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
portsc1, devlc);
/* bus reset is finished */
if (!(portsc1 & PORTS_PR)) {
/* get the speed */
dev->gadget.speed = lpm_device_speed(devlc);
dev_vdbg(&dev->pdev->dev, "dev->gadget.speed = %d\n",
dev->gadget.speed);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* LPM L0 to L1 */
if (dev->lpm && dev->lpm_state == LPM_L0)
if (portsc1 & PORTS_SUSP && portsc1 & PORTS_SLP) {
dev_info(&dev->pdev->dev, "LPM L0 to L1\n");
dev->lpm_state = LPM_L1;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* LPM L1 to L0, force resume or remote wakeup finished */
if (dev->lpm && dev->lpm_state == LPM_L1)
if (!(portsc1 & PORTS_SUSP)) {
dev_info(&dev->pdev->dev, "LPM L1 to L0\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev->lpm_state = LPM_L0;
}
/* update USB state */
if (!dev->resume_state)
dev->usb_state = USB_STATE_DEFAULT;
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* USB reset interrupt handler */
static void handle_usb_reset(struct langwell_udc *dev)
{
u32 deviceaddr,
endptsetupstat,
endptcomplete;
unsigned long timeout;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* Write-Clear the device address */
deviceaddr = readl(&dev->op_regs->deviceaddr);
writel(deviceaddr & ~USBADR_MASK, &dev->op_regs->deviceaddr);
dev->dev_addr = 0;
/* clear usb state */
dev->resume_state = 0;
/* LPM L1 to L0, reset */
if (dev->lpm)
dev->lpm_state = LPM_L0;
dev->ep0_dir = USB_DIR_OUT;
dev->ep0_state = WAIT_FOR_SETUP;
/* remote wakeup reset to 0 when the device is reset */
dev->remote_wakeup = 0;
dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev->gadget.b_hnp_enable = 0;
dev->gadget.a_hnp_support = 0;
dev->gadget.a_alt_hnp_support = 0;
/* Write-Clear all the setup token semaphores */
endptsetupstat = readl(&dev->op_regs->endptsetupstat);
writel(endptsetupstat, &dev->op_regs->endptsetupstat);
/* Write-Clear all the endpoint complete status bits */
endptcomplete = readl(&dev->op_regs->endptcomplete);
writel(endptcomplete, &dev->op_regs->endptcomplete);
/* wait until all endptprime bits cleared */
timeout = jiffies + PRIME_TIMEOUT;
while (readl(&dev->op_regs->endptprime)) {
if (time_after(jiffies, timeout)) {
dev_err(&dev->pdev->dev, "USB reset timeout\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
break;
}
cpu_relax();
}
/* write 1s to endptflush register to clear any primed buffers */
writel((u32) ~0, &dev->op_regs->endptflush);
if (readl(&dev->op_regs->portsc1) & PORTS_PR) {
dev_vdbg(&dev->pdev->dev, "USB bus reset\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* bus is reseting */
dev->bus_reset = 1;
/* reset all the queues, stop all USB activities */
stop_activity(dev);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev->usb_state = USB_STATE_DEFAULT;
} else {
dev_vdbg(&dev->pdev->dev, "device controller reset\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* controller reset */
langwell_udc_reset(dev);
/* reset all the queues, stop all USB activities */
stop_activity(dev);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* reset ep0 dQH and endptctrl */
ep0_reset(dev);
/* enable interrupt and set controller to run state */
langwell_udc_start(dev);
dev->usb_state = USB_STATE_ATTACHED;
}
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* USB bus suspend/resume interrupt */
static void handle_bus_suspend(struct langwell_udc *dev)
{
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev->resume_state = dev->usb_state;
dev->usb_state = USB_STATE_SUSPENDED;
/* report suspend to the driver */
if (dev->driver) {
if (dev->driver->suspend) {
spin_unlock(&dev->lock);
dev->driver->suspend(&dev->gadget);
spin_lock(&dev->lock);
dev_dbg(&dev->pdev->dev, "suspend %s\n",
dev->driver->driver.name);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
}
/* enter PHY low power suspend */
if (dev->pdev->device != 0x0829)
langwell_phy_low_power(dev, 0);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
static void handle_bus_resume(struct langwell_udc *dev)
{
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev->usb_state = dev->resume_state;
dev->resume_state = 0;
/* exit PHY low power suspend */
if (dev->pdev->device != 0x0829)
langwell_phy_low_power(dev, 0);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* report resume to the driver */
if (dev->driver) {
if (dev->driver->resume) {
spin_unlock(&dev->lock);
dev->driver->resume(&dev->gadget);
spin_lock(&dev->lock);
dev_dbg(&dev->pdev->dev, "resume %s\n",
dev->driver->driver.name);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
}
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* USB device controller interrupt handler */
static irqreturn_t langwell_irq(int irq, void *_dev)
{
struct langwell_udc *dev = _dev;
u32 usbsts,
usbintr,
irq_sts,
portsc1;
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (dev->stopped) {
dev_vdbg(&dev->pdev->dev, "handle IRQ_NONE\n");
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return IRQ_NONE;
}
spin_lock(&dev->lock);
/* USB status */
usbsts = readl(&dev->op_regs->usbsts);
/* USB interrupt enable */
usbintr = readl(&dev->op_regs->usbintr);
irq_sts = usbsts & usbintr;
dev_vdbg(&dev->pdev->dev,
"usbsts = 0x%08x, usbintr = 0x%08x, irq_sts = 0x%08x\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
usbsts, usbintr, irq_sts);
if (!irq_sts) {
dev_vdbg(&dev->pdev->dev, "handle IRQ_NONE\n");
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
spin_unlock(&dev->lock);
return IRQ_NONE;
}
/* Write-Clear interrupt status bits */
writel(irq_sts, &dev->op_regs->usbsts);
/* resume from suspend */
portsc1 = readl(&dev->op_regs->portsc1);
if (dev->usb_state == USB_STATE_SUSPENDED)
if (!(portsc1 & PORTS_SUSP))
handle_bus_resume(dev);
/* USB interrupt */
if (irq_sts & STS_UI) {
dev_vdbg(&dev->pdev->dev, "USB interrupt\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* setup packet received from ep0 */
if (readl(&dev->op_regs->endptsetupstat)
& EP0SETUPSTAT_MASK) {
dev_vdbg(&dev->pdev->dev,
"USB SETUP packet received interrupt\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* setup tripwire semaphone */
setup_tripwire(dev);
handle_setup_packet(dev, &dev->local_setup_buff);
}
/* USB transfer completion */
if (readl(&dev->op_regs->endptcomplete)) {
dev_vdbg(&dev->pdev->dev,
"USB transfer completion interrupt\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
handle_trans_complete(dev);
}
}
/* SOF received interrupt (for ISO transfer) */
if (irq_sts & STS_SRI) {
/* FIXME */
/* dev_vdbg(&dev->pdev->dev, "SOF received interrupt\n"); */
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/* port change detect interrupt */
if (irq_sts & STS_PCI) {
dev_vdbg(&dev->pdev->dev, "port change detect interrupt\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
handle_port_change(dev);
}
/* suspend interrupt */
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (irq_sts & STS_SLI) {
dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
handle_bus_suspend(dev);
}
/* USB reset interrupt */
if (irq_sts & STS_URI) {
dev_vdbg(&dev->pdev->dev, "USB reset interrupt\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
handle_usb_reset(dev);
}
/* USB error or system error interrupt */
if (irq_sts & (STS_UEI | STS_SEI)) {
/* FIXME */
dev_warn(&dev->pdev->dev, "error IRQ, irq_sts: %x\n", irq_sts);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
spin_unlock(&dev->lock);
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return IRQ_HANDLED;
}
/*-------------------------------------------------------------------------*/
/* release device structure */
static void gadget_release(struct device *_dev)
{
struct langwell_udc *dev = dev_get_drvdata(_dev);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
complete(dev->done);
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
kfree(dev);
}
/* enable SRAM caching if SRAM detected */
static void sram_init(struct langwell_udc *dev)
{
struct pci_dev *pdev = dev->pdev;
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
dev->sram_addr = pci_resource_start(pdev, 1);
dev->sram_size = pci_resource_len(pdev, 1);
dev_info(&dev->pdev->dev, "Found private SRAM at %x size:%x\n",
dev->sram_addr, dev->sram_size);
dev->got_sram = 1;
if (pci_request_region(pdev, 1, kobject_name(&pdev->dev.kobj))) {
dev_warn(&dev->pdev->dev, "SRAM request failed\n");
dev->got_sram = 0;
} else if (!dma_declare_coherent_memory(&pdev->dev, dev->sram_addr,
dev->sram_addr, dev->sram_size, DMA_MEMORY_MAP)) {
dev_warn(&dev->pdev->dev, "SRAM DMA declare failed\n");
pci_release_region(pdev, 1);
dev->got_sram = 0;
}
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
}
/* release SRAM caching */
static void sram_deinit(struct langwell_udc *dev)
{
struct pci_dev *pdev = dev->pdev;
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
dma_release_declared_memory(&pdev->dev);
pci_release_region(pdev, 1);
dev->got_sram = 0;
dev_info(&dev->pdev->dev, "release SRAM caching\n");
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
}
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* tear down the binding between this driver and the pci device */
static void langwell_udc_remove(struct pci_dev *pdev)
{
struct langwell_udc *dev = pci_get_drvdata(pdev);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
DECLARE_COMPLETION(done);
BUG_ON(dev->driver);
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev->done = &done;
/* free dTD dma_pool and dQH */
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (dev->dtd_pool)
dma_pool_destroy(dev->dtd_pool);
if (dev->ep_dqh)
dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
dev->ep_dqh, dev->ep_dqh_dma);
/* release SRAM caching */
if (dev->has_sram && dev->got_sram)
sram_deinit(dev);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (dev->status_req) {
kfree(dev->status_req->req.buf);
kfree(dev->status_req);
}
kfree(dev->ep);
/* disable IRQ handler */
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (dev->got_irq)
free_irq(pdev->irq, dev);
if (dev->cap_regs)
iounmap(dev->cap_regs);
if (dev->region)
release_mem_region(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0));
if (dev->enabled)
pci_disable_device(pdev);
dev->cap_regs = NULL;
dev_info(&dev->pdev->dev, "unbind\n");
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
device_unregister(&dev->gadget.dev);
device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
device_remove_file(&pdev->dev, &dev_attr_remote_wakeup);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
pci_set_drvdata(pdev, NULL);
/* free dev, wait for the release() finished */
wait_for_completion(&done);
}
/*
* wrap this driver around the specified device, but
* don't respond over USB until a gadget driver binds to us.
*/
static int langwell_udc_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct langwell_udc *dev;
unsigned long resource, len;
void __iomem *base = NULL;
size_t size;
int retval;
/* alloc, and start init */
dev = kzalloc(sizeof *dev, GFP_KERNEL);
if (dev == NULL) {
retval = -ENOMEM;
goto error;
}
/* initialize device spinlock */
spin_lock_init(&dev->lock);
dev->pdev = pdev;
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
pci_set_drvdata(pdev, dev);
/* now all the pci goodies ... */
if (pci_enable_device(pdev) < 0) {
retval = -ENODEV;
goto error;
}
dev->enabled = 1;
/* control register: BAR 0 */
resource = pci_resource_start(pdev, 0);
len = pci_resource_len(pdev, 0);
if (!request_mem_region(resource, len, driver_name)) {
dev_err(&dev->pdev->dev, "controller already in use\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
retval = -EBUSY;
goto error;
}
dev->region = 1;
base = ioremap_nocache(resource, len);
if (base == NULL) {
dev_err(&dev->pdev->dev, "can't map memory\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
retval = -EFAULT;
goto error;
}
dev->cap_regs = (struct langwell_cap_regs __iomem *) base;
dev_vdbg(&dev->pdev->dev, "dev->cap_regs: %p\n", dev->cap_regs);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev->op_regs = (struct langwell_op_regs __iomem *)
(base + OP_REG_OFFSET);
dev_vdbg(&dev->pdev->dev, "dev->op_regs: %p\n", dev->op_regs);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* irq setup after old hardware is cleaned up */
if (!pdev->irq) {
dev_err(&dev->pdev->dev, "No IRQ. Check PCI setup!\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
retval = -ENODEV;
goto error;
}
dev->has_sram = 1;
dev->got_sram = 0;
dev_vdbg(&dev->pdev->dev, "dev->has_sram: %d\n", dev->has_sram);
/* enable SRAM caching if detected */
if (dev->has_sram && !dev->got_sram)
sram_init(dev);
dev_info(&dev->pdev->dev,
"irq %d, io mem: 0x%08lx, len: 0x%08lx, pci mem 0x%p\n",
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
pdev->irq, resource, len, base);
/* enables bus-mastering for device dev */
pci_set_master(pdev);
if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
driver_name, dev) != 0) {
dev_err(&dev->pdev->dev,
"request interrupt %d failed\n", pdev->irq);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
retval = -EBUSY;
goto error;
}
dev->got_irq = 1;
/* set stopped bit */
dev->stopped = 1;
/* capabilities and endpoint number */
dev->lpm = (readl(&dev->cap_regs->hccparams) & HCC_LEN) ? 1 : 0;
dev->dciversion = readw(&dev->cap_regs->dciversion);
dev->devcap = (readl(&dev->cap_regs->dccparams) & DEVCAP) ? 1 : 0;
dev_vdbg(&dev->pdev->dev, "dev->lpm: %d\n", dev->lpm);
dev_vdbg(&dev->pdev->dev, "dev->dciversion: 0x%04x\n",
dev->dciversion);
dev_vdbg(&dev->pdev->dev, "dccparams: 0x%08x\n",
readl(&dev->cap_regs->dccparams));
dev_vdbg(&dev->pdev->dev, "dev->devcap: %d\n", dev->devcap);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (!dev->devcap) {
dev_err(&dev->pdev->dev, "can't support device mode\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
retval = -ENODEV;
goto error;
}
/* a pair of endpoints (out/in) for each address */
dev->ep_max = DEN(readl(&dev->cap_regs->dccparams)) * 2;
dev_vdbg(&dev->pdev->dev, "dev->ep_max: %d\n", dev->ep_max);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* allocate endpoints memory */
dev->ep = kzalloc(sizeof(struct langwell_ep) * dev->ep_max,
GFP_KERNEL);
if (!dev->ep) {
dev_err(&dev->pdev->dev, "allocate endpoints memory failed\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
retval = -ENOMEM;
goto error;
}
/* allocate device dQH memory */
size = dev->ep_max * sizeof(struct langwell_dqh);
dev_vdbg(&dev->pdev->dev, "orig size = %zd\n", size);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (size < DQH_ALIGNMENT)
size = DQH_ALIGNMENT;
else if ((size % DQH_ALIGNMENT) != 0) {
size += DQH_ALIGNMENT + 1;
size &= ~(DQH_ALIGNMENT - 1);
}
dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
&dev->ep_dqh_dma, GFP_KERNEL);
if (!dev->ep_dqh) {
dev_err(&dev->pdev->dev, "allocate dQH memory failed\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
retval = -ENOMEM;
goto error;
}
dev->ep_dqh_size = size;
dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %zd\n", dev->ep_dqh_size);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* initialize ep0 status request structure */
dev->status_req = kzalloc(sizeof(struct langwell_request), GFP_KERNEL);
if (!dev->status_req) {
dev_err(&dev->pdev->dev,
"allocate status_req memory failed\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
retval = -ENOMEM;
goto error;
}
INIT_LIST_HEAD(&dev->status_req->queue);
/* allocate a small amount of memory to get valid address */
dev->status_req->req.buf = kmalloc(8, GFP_KERNEL);
dev->status_req->req.dma = virt_to_phys(dev->status_req->req.buf);
dev->resume_state = USB_STATE_NOTATTACHED;
dev->usb_state = USB_STATE_POWERED;
dev->ep0_dir = USB_DIR_OUT;
/* remote wakeup reset to 0 when the device is reset */
dev->remote_wakeup = 0;
dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* reset device controller */
langwell_udc_reset(dev);
/* initialize gadget structure */
dev->gadget.ops = &langwell_ops; /* usb_gadget_ops */
dev->gadget.ep0 = &dev->ep[0].ep; /* gadget ep0 */
INIT_LIST_HEAD(&dev->gadget.ep_list); /* ep_list */
dev->gadget.speed = USB_SPEED_UNKNOWN; /* speed */
dev->gadget.max_speed = USB_SPEED_HIGH; /* support dual speed */
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* the "gadget" abstracts/virtualizes the controller */
dev_set_name(&dev->gadget.dev, "gadget");
dev->gadget.dev.parent = &pdev->dev;
dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
dev->gadget.dev.release = gadget_release;
dev->gadget.name = driver_name; /* gadget name */
/* controller endpoints reinit */
eps_reinit(dev);
/* reset ep0 dQH and endptctrl */
ep0_reset(dev);
/* create dTD dma_pool resource */
dev->dtd_pool = dma_pool_create("langwell_dtd",
&dev->pdev->dev,
sizeof(struct langwell_dtd),
DTD_ALIGNMENT,
DMA_BOUNDARY);
if (!dev->dtd_pool) {
retval = -ENOMEM;
goto error;
}
/* done */
dev_info(&dev->pdev->dev, "%s\n", driver_desc);
dev_info(&dev->pdev->dev, "irq %d, pci mem %p\n", pdev->irq, base);
dev_info(&dev->pdev->dev, "Driver version: " DRIVER_VERSION "\n");
dev_info(&dev->pdev->dev, "Support (max) %d endpoints\n", dev->ep_max);
dev_info(&dev->pdev->dev, "Device interface version: 0x%04x\n",
dev->dciversion);
dev_info(&dev->pdev->dev, "Controller mode: %s\n",
dev->devcap ? "Device" : "Host");
dev_info(&dev->pdev->dev, "Support USB LPM: %s\n",
dev->lpm ? "Yes" : "No");
dev_vdbg(&dev->pdev->dev,
"After langwell_udc_probe(), print all registers:\n");
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
print_all_registers(dev);
retval = device_register(&dev->gadget.dev);
if (retval)
goto error;
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
if (retval)
goto error;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
retval = device_create_file(&pdev->dev, &dev_attr_langwell_udc);
if (retval)
goto error;
retval = device_create_file(&pdev->dev, &dev_attr_remote_wakeup);
if (retval)
goto error_attr1;
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return 0;
error_attr1:
device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
error:
if (dev) {
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
langwell_udc_remove(pdev);
}
return retval;
}
/* device controller suspend */
static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct langwell_udc *dev = pci_get_drvdata(pdev);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
usb_del_gadget_udc(&dev->gadget);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* disable interrupt and set controller to stop state */
langwell_udc_stop(dev);
/* disable IRQ handler */
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
if (dev->got_irq)
free_irq(pdev->irq, dev);
dev->got_irq = 0;
/* save PCI state */
pci_save_state(pdev);
spin_lock_irq(&dev->lock);
/* stop all usb activities */
stop_activity(dev);
spin_unlock_irq(&dev->lock);
/* free dTD dma_pool and dQH */
if (dev->dtd_pool)
dma_pool_destroy(dev->dtd_pool);
if (dev->ep_dqh)
dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
dev->ep_dqh, dev->ep_dqh_dma);
/* release SRAM caching */
if (dev->has_sram && dev->got_sram)
sram_deinit(dev);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* set device power state */
pci_set_power_state(pdev, PCI_D3hot);
/* enter PHY low power suspend */
if (dev->pdev->device != 0x0829)
langwell_phy_low_power(dev, 1);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return 0;
}
/* device controller resume */
static int langwell_udc_resume(struct pci_dev *pdev)
{
struct langwell_udc *dev = pci_get_drvdata(pdev);
size_t size;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* exit PHY low power suspend */
if (dev->pdev->device != 0x0829)
langwell_phy_low_power(dev, 0);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* set device D0 power state */
pci_set_power_state(pdev, PCI_D0);
/* enable SRAM caching if detected */
if (dev->has_sram && !dev->got_sram)
sram_init(dev);
/* allocate device dQH memory */
size = dev->ep_max * sizeof(struct langwell_dqh);
dev_vdbg(&dev->pdev->dev, "orig size = %zd\n", size);
if (size < DQH_ALIGNMENT)
size = DQH_ALIGNMENT;
else if ((size % DQH_ALIGNMENT) != 0) {
size += DQH_ALIGNMENT + 1;
size &= ~(DQH_ALIGNMENT - 1);
}
dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
&dev->ep_dqh_dma, GFP_KERNEL);
if (!dev->ep_dqh) {
dev_err(&dev->pdev->dev, "allocate dQH memory failed\n");
return -ENOMEM;
}
dev->ep_dqh_size = size;
dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %zd\n", dev->ep_dqh_size);
/* create dTD dma_pool resource */
dev->dtd_pool = dma_pool_create("langwell_dtd",
&dev->pdev->dev,
sizeof(struct langwell_dtd),
DTD_ALIGNMENT,
DMA_BOUNDARY);
if (!dev->dtd_pool)
return -ENOMEM;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* restore PCI state */
pci_restore_state(pdev);
/* enable IRQ handler */
if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
driver_name, dev) != 0) {
dev_err(&dev->pdev->dev, "request interrupt %d failed\n",
pdev->irq);
return -EBUSY;
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
dev->got_irq = 1;
/* reset and start controller to run state */
if (dev->stopped) {
/* reset device controller */
langwell_udc_reset(dev);
/* reset ep0 dQH and endptctrl */
ep0_reset(dev);
/* start device if gadget is loaded */
if (dev->driver)
langwell_udc_start(dev);
}
/* reset USB status */
dev->usb_state = USB_STATE_ATTACHED;
dev->ep0_state = WAIT_FOR_SETUP;
dev->ep0_dir = USB_DIR_OUT;
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
return 0;
}
/* pci driver shutdown */
static void langwell_udc_shutdown(struct pci_dev *pdev)
{
struct langwell_udc *dev = pci_get_drvdata(pdev);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
u32 usbmode;
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
/* reset controller mode to IDLE */
usbmode = readl(&dev->op_regs->usbmode);
dev_dbg(&dev->pdev->dev, "usbmode = 0x%08x\n", usbmode);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
usbmode &= (~3 | MODE_IDLE);
writel(usbmode, &dev->op_regs->usbmode);
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-04 15:34:49 +08:00
}
/*-------------------------------------------------------------------------*/
static const struct pci_device_id pci_ids[] = { {
.class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
.class_mask = ~0,
.vendor = 0x8086,
.device = 0x0811,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
}, { /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(pci, pci_ids);
static struct pci_driver langwell_pci_driver = {
.name = (char *) driver_name,
.id_table = pci_ids,
.probe = langwell_udc_probe,
.remove = langwell_udc_remove,
/* device controller suspend/resume */
.suspend = langwell_udc_suspend,
.resume = langwell_udc_resume,
.shutdown = langwell_udc_shutdown,
};
static int __init init(void)
{
return pci_register_driver(&langwell_pci_driver);
}
module_init(init);
static void __exit cleanup(void)
{
pci_unregister_driver(&langwell_pci_driver);
}
module_exit(cleanup);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Xiaochen Shen <xiaochen.shen@intel.com>");
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");