mirror of https://gitee.com/openkylin/linux.git
58 lines
2.2 KiB
Plaintext
58 lines
2.2 KiB
Plaintext
|
SPI (Serial Peripheral Interface) busses
|
||
|
|
|
||
|
|
SPI busses can be described with a node for the SPI master device
|
||
|
|
and a set of child nodes for each SPI slave on the bus. For this
|
||
|
|
discussion, it is assumed that the system's SPI controller is in
|
||
|
|
SPI master mode. This binding does not describe SPI controllers
|
||
|
|
in slave mode.
|
||
|
|
|
||
|
|
The SPI master node requires the following properties:
|
||
|
|
- #address-cells - number of cells required to define a chip select
|
||
|
|
address on the SPI bus.
|
||
|
|
- #size-cells - should be zero.
|
||
|
|
- compatible - name of SPI bus controller following generic names
|
||
|
|
recommended practice.
|
||
|
|
No other properties are required in the SPI bus node. It is assumed
|
||
|
|
that a driver for an SPI bus device will understand that it is an SPI bus.
|
||
|
|
However, the binding does not attempt to define the specific method for
|
||
|
|
assigning chip select numbers. Since SPI chip select configuration is
|
||
|
|
flexible and non-standardized, it is left out of this binding with the
|
||
|
|
assumption that board specific platform code will be used to manage
|
||
|
|
chip selects. Individual drivers can define additional properties to
|
||
|
|
support describing the chip select layout.
|
||
|
|
|
||
|
|
SPI slave nodes must be children of the SPI master node and can
|
||
|
|
contain the following properties.
|
||
|
|
- reg - (required) chip select address of device.
|
||
|
|
- compatible - (required) name of SPI device following generic names
|
||
|
|
recommended practice
|
||
|
|
- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
|
||
|
|
- spi-cpol - (optional) Empty property indicating device requires
|
||
|
|
inverse clock polarity (CPOL) mode
|
||
|
|
- spi-cpha - (optional) Empty property indicating device requires
|
||
|
|
shifted clock phase (CPHA) mode
|
||
|
|
- spi-cs-high - (optional) Empty property indicating device requires
|
||
|
|
chip select active high
|
||
|
|
|
||
|
|
SPI example for an MPC5200 SPI bus:
|
||
|
|
spi@f00 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
|
||
|
|
reg = <0xf00 0x20>;
|
||
|
|
interrupts = <2 13 0 2 14 0>;
|
||
|
|
interrupt-parent = <&mpc5200_pic>;
|
||
|
|
|
||
|
|
ethernet-switch@0 {
|
||
|
|
compatible = "micrel,ks8995m";
|
||
|
|
spi-max-frequency = <1000000>;
|
||
|
|
reg = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
codec@1 {
|
||
|
|
compatible = "ti,tlv320aic26";
|
||
|
|
spi-max-frequency = <100000>;
|
||
|
|
reg = <1>;
|
||
|
|
};
|
||
|
|
};
|