linux/arch/powerpc/include/asm/opal.h

991 lines
28 KiB
C
Raw Normal View History

/*
* PowerNV OPAL definitions.
*
* Copyright 2011 IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef __OPAL_H
#define __OPAL_H
#ifndef __ASSEMBLY__
/*
* SG entry
*
* WARNING: The current implementation requires each entry
* to represent a block that is 4k aligned *and* each block
* size except the last one in the list to be as well.
*/
struct opal_sg_entry {
__be64 data;
__be64 length;
};
/* SG list */
struct opal_sg_list {
__be64 length;
__be64 next;
struct opal_sg_entry entry[];
};
/* We calculate number of sg entries based on PAGE_SIZE */
#define SG_ENTRIES_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct opal_sg_entry))
#endif /* __ASSEMBLY__ */
/****** OPAL APIs ******/
/* Return codes */
#define OPAL_SUCCESS 0
#define OPAL_PARAMETER -1
#define OPAL_BUSY -2
#define OPAL_PARTIAL -3
#define OPAL_CONSTRAINED -4
#define OPAL_CLOSED -5
#define OPAL_HARDWARE -6
#define OPAL_UNSUPPORTED -7
#define OPAL_PERMISSION -8
#define OPAL_NO_MEM -9
#define OPAL_RESOURCE -10
#define OPAL_INTERNAL_ERROR -11
#define OPAL_BUSY_EVENT -12
#define OPAL_HARDWARE_FROZEN -13
#define OPAL_WRONG_STATE -14
#define OPAL_ASYNC_COMPLETION -15
/* API Tokens (in r0) */
#define OPAL_INVALID_CALL -1
#define OPAL_CONSOLE_WRITE 1
#define OPAL_CONSOLE_READ 2
#define OPAL_RTC_READ 3
#define OPAL_RTC_WRITE 4
#define OPAL_CEC_POWER_DOWN 5
#define OPAL_CEC_REBOOT 6
#define OPAL_READ_NVRAM 7
#define OPAL_WRITE_NVRAM 8
#define OPAL_HANDLE_INTERRUPT 9
#define OPAL_POLL_EVENTS 10
#define OPAL_PCI_SET_HUB_TCE_MEMORY 11
#define OPAL_PCI_SET_PHB_TCE_MEMORY 12
#define OPAL_PCI_CONFIG_READ_BYTE 13
#define OPAL_PCI_CONFIG_READ_HALF_WORD 14
#define OPAL_PCI_CONFIG_READ_WORD 15
#define OPAL_PCI_CONFIG_WRITE_BYTE 16
#define OPAL_PCI_CONFIG_WRITE_HALF_WORD 17
#define OPAL_PCI_CONFIG_WRITE_WORD 18
#define OPAL_SET_XIVE 19
#define OPAL_GET_XIVE 20
#define OPAL_GET_COMPLETION_TOKEN_STATUS 21 /* obsolete */
#define OPAL_REGISTER_OPAL_EXCEPTION_HANDLER 22
#define OPAL_PCI_EEH_FREEZE_STATUS 23
#define OPAL_PCI_SHPC 24
#define OPAL_CONSOLE_WRITE_BUFFER_SPACE 25
#define OPAL_PCI_EEH_FREEZE_CLEAR 26
#define OPAL_PCI_PHB_MMIO_ENABLE 27
#define OPAL_PCI_SET_PHB_MEM_WINDOW 28
#define OPAL_PCI_MAP_PE_MMIO_WINDOW 29
#define OPAL_PCI_SET_PHB_TABLE_MEMORY 30
#define OPAL_PCI_SET_PE 31
#define OPAL_PCI_SET_PELTV 32
#define OPAL_PCI_SET_MVE 33
#define OPAL_PCI_SET_MVE_ENABLE 34
#define OPAL_PCI_GET_XIVE_REISSUE 35
#define OPAL_PCI_SET_XIVE_REISSUE 36
#define OPAL_PCI_SET_XIVE_PE 37
#define OPAL_GET_XIVE_SOURCE 38
#define OPAL_GET_MSI_32 39
#define OPAL_GET_MSI_64 40
#define OPAL_START_CPU 41
#define OPAL_QUERY_CPU_STATUS 42
#define OPAL_WRITE_OPPANEL 43
#define OPAL_PCI_MAP_PE_DMA_WINDOW 44
#define OPAL_PCI_MAP_PE_DMA_WINDOW_REAL 45
#define OPAL_PCI_RESET 49
#define OPAL_PCI_GET_HUB_DIAG_DATA 50
#define OPAL_PCI_GET_PHB_DIAG_DATA 51
#define OPAL_PCI_FENCE_PHB 52
#define OPAL_PCI_REINIT 53
#define OPAL_PCI_MASK_PE_ERROR 54
#define OPAL_SET_SLOT_LED_STATUS 55
#define OPAL_GET_EPOW_STATUS 56
#define OPAL_SET_SYSTEM_ATTENTION_LED 57
#define OPAL_RESERVED1 58
#define OPAL_RESERVED2 59
#define OPAL_PCI_NEXT_ERROR 60
#define OPAL_PCI_EEH_FREEZE_STATUS2 61
#define OPAL_PCI_POLL 62
#define OPAL_PCI_MSI_EOI 63
#define OPAL_PCI_GET_PHB_DIAG_DATA2 64
#define OPAL_XSCOM_READ 65
#define OPAL_XSCOM_WRITE 66
#define OPAL_LPC_READ 67
#define OPAL_LPC_WRITE 68
#define OPAL_RETURN_CPU 69
#define OPAL_REINIT_CPUS 70
powerpc/powernv: Read OPAL error log and export it through sysfs Based on a patch by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> This patch adds support to read error logs from OPAL and export them to userspace through a sysfs interface. We export each log entry as a directory in /sys/firmware/opal/elog/ Currently, OPAL will buffer up to 128 error log records, we don't need to have any knowledge of this limit on the Linux side as that is actually largely transparent to us. Each error log entry has the following files: id, type, acknowledge, raw. Currently we just export the raw binary error log in the 'raw' attribute. In a future patch, we may parse more of the error log to make it a bit easier for userspace (e.g. to be able to display a brief summary in petitboot without having to have a full parser). If we have >128 logs from OPAL, we'll only be notified of 128 until userspace starts acknowledging them. This limitation may be lifted in the future and with this patch, that should "just work" from the linux side. A userspace daemon should: - wait for error log entries using normal mechanisms (we announce creation) - read error log entry - save error log entry safely to disk - acknowledge the error log entry - rinse, repeat. On the Linux side, we read the error log when we're notified of it. This possibly isn't ideal as it would be better to only read them on-demand. However, this doesn't really work with current OPAL interface, so we read the error log immediately when notified at the moment. I've tested this pretty extensively and am rather confident that the linux side of things works rather well. There is currently an issue with the service processor side of things for >128 error logs though. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-28 08:58:32 +08:00
#define OPAL_ELOG_READ 71
#define OPAL_ELOG_WRITE 72
#define OPAL_ELOG_ACK 73
#define OPAL_ELOG_RESEND 74
#define OPAL_ELOG_SIZE 75
#define OPAL_FLASH_VALIDATE 76
#define OPAL_FLASH_MANAGE 77
#define OPAL_FLASH_UPDATE 78
#define OPAL_RESYNC_TIMEBASE 79
powerpc/powernv Platform dump interface This enables support for userspace to fetch and initiate FSP and Platform dumps from the service processor (via firmware) through sysfs. Based on original patch from Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Flow: - We register for OPAL notification events. - OPAL sends new dump available notification. - We make information on dump available via sysfs - Userspace requests dump contents - We retrieve the dump via OPAL interface - User copies the dump data - userspace sends ack for dump - We send ACK to OPAL. sysfs files: - We add the /sys/firmware/opal/dump directory - echoing 1 (well, anything, but in future we may support different dump types) to /sys/firmware/opal/dump/initiate_dump will initiate a dump. - Each dump that we've been notified of gets a directory in /sys/firmware/opal/dump/ with a name of the dump type and ID (in hex, as this is what's used elsewhere to identify the dump). - Each dump has files: id, type, dump and acknowledge dump is binary and is the dump itself. echoing 'ack' to acknowledge (currently any string will do) will acknowledge the dump and it will soon after disappear from sysfs. OPAL APIs: - opal_dump_init() - opal_dump_info() - opal_dump_read() - opal_dump_ack() - opal_dump_resend_notification() Currently we are only ever notified for one dump at a time (until the user explicitly acks the current dump, then we get a notification of the next dump), but this kernel code should "just work" when OPAL starts notifying us of all the dumps present. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-03 07:25:42 +08:00
#define OPAL_DUMP_INIT 81
#define OPAL_DUMP_INFO 82
#define OPAL_DUMP_READ 83
#define OPAL_DUMP_ACK 84
#define OPAL_GET_MSG 85
#define OPAL_CHECK_ASYNC_COMPLETION 86
#define OPAL_SYNC_HOST_REBOOT 87
#define OPAL_SENSOR_READ 88
#define OPAL_GET_PARAM 89
#define OPAL_SET_PARAM 90
#define OPAL_DUMP_RESEND 91
powerpc/powernv Platform dump interface This enables support for userspace to fetch and initiate FSP and Platform dumps from the service processor (via firmware) through sysfs. Based on original patch from Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Flow: - We register for OPAL notification events. - OPAL sends new dump available notification. - We make information on dump available via sysfs - Userspace requests dump contents - We retrieve the dump via OPAL interface - User copies the dump data - userspace sends ack for dump - We send ACK to OPAL. sysfs files: - We add the /sys/firmware/opal/dump directory - echoing 1 (well, anything, but in future we may support different dump types) to /sys/firmware/opal/dump/initiate_dump will initiate a dump. - Each dump that we've been notified of gets a directory in /sys/firmware/opal/dump/ with a name of the dump type and ID (in hex, as this is what's used elsewhere to identify the dump). - Each dump has files: id, type, dump and acknowledge dump is binary and is the dump itself. echoing 'ack' to acknowledge (currently any string will do) will acknowledge the dump and it will soon after disappear from sysfs. OPAL APIs: - opal_dump_init() - opal_dump_info() - opal_dump_read() - opal_dump_ack() - opal_dump_resend_notification() Currently we are only ever notified for one dump at a time (until the user explicitly acks the current dump, then we get a notification of the next dump), but this kernel code should "just work" when OPAL starts notifying us of all the dumps present. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-03 07:25:42 +08:00
#define OPAL_DUMP_INFO2 94
#define OPAL_PCI_EEH_FREEZE_SET 97
#define OPAL_HANDLE_HMI 98
#define OPAL_REGISTER_DUMP_REGION 101
#define OPAL_UNREGISTER_DUMP_REGION 102
#ifndef __ASSEMBLY__
#include <linux/notifier.h>
/* Other enums */
enum OpalVendorApiTokens {
OPAL_START_VENDOR_API_RANGE = 1000, OPAL_END_VENDOR_API_RANGE = 1999
};
enum OpalFreezeState {
OPAL_EEH_STOPPED_NOT_FROZEN = 0,
OPAL_EEH_STOPPED_MMIO_FREEZE = 1,
OPAL_EEH_STOPPED_DMA_FREEZE = 2,
OPAL_EEH_STOPPED_MMIO_DMA_FREEZE = 3,
OPAL_EEH_STOPPED_RESET = 4,
OPAL_EEH_STOPPED_TEMP_UNAVAIL = 5,
OPAL_EEH_STOPPED_PERM_UNAVAIL = 6
};
enum OpalEehFreezeActionToken {
OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO = 1,
OPAL_EEH_ACTION_CLEAR_FREEZE_DMA = 2,
OPAL_EEH_ACTION_CLEAR_FREEZE_ALL = 3,
OPAL_EEH_ACTION_SET_FREEZE_MMIO = 1,
OPAL_EEH_ACTION_SET_FREEZE_DMA = 2,
OPAL_EEH_ACTION_SET_FREEZE_ALL = 3
};
enum OpalPciStatusToken {
OPAL_EEH_NO_ERROR = 0,
OPAL_EEH_IOC_ERROR = 1,
OPAL_EEH_PHB_ERROR = 2,
OPAL_EEH_PE_ERROR = 3,
OPAL_EEH_PE_MMIO_ERROR = 4,
OPAL_EEH_PE_DMA_ERROR = 5
};
enum OpalPciErrorSeverity {
OPAL_EEH_SEV_NO_ERROR = 0,
OPAL_EEH_SEV_IOC_DEAD = 1,
OPAL_EEH_SEV_PHB_DEAD = 2,
OPAL_EEH_SEV_PHB_FENCED = 3,
OPAL_EEH_SEV_PE_ER = 4,
OPAL_EEH_SEV_INF = 5
};
enum OpalShpcAction {
OPAL_SHPC_GET_LINK_STATE = 0,
OPAL_SHPC_GET_SLOT_STATE = 1
};
enum OpalShpcLinkState {
OPAL_SHPC_LINK_DOWN = 0,
OPAL_SHPC_LINK_UP = 1
};
enum OpalMmioWindowType {
OPAL_M32_WINDOW_TYPE = 1,
OPAL_M64_WINDOW_TYPE = 2,
OPAL_IO_WINDOW_TYPE = 3
};
enum OpalShpcSlotState {
OPAL_SHPC_DEV_NOT_PRESENT = 0,
OPAL_SHPC_DEV_PRESENT = 1
};
enum OpalExceptionHandler {
OPAL_MACHINE_CHECK_HANDLER = 1,
OPAL_HYPERVISOR_MAINTENANCE_HANDLER = 2,
OPAL_SOFTPATCH_HANDLER = 3
};
enum OpalPendingState {
OPAL_EVENT_OPAL_INTERNAL = 0x1,
OPAL_EVENT_NVRAM = 0x2,
OPAL_EVENT_RTC = 0x4,
OPAL_EVENT_CONSOLE_OUTPUT = 0x8,
OPAL_EVENT_CONSOLE_INPUT = 0x10,
OPAL_EVENT_ERROR_LOG_AVAIL = 0x20,
OPAL_EVENT_ERROR_LOG = 0x40,
OPAL_EVENT_EPOW = 0x80,
OPAL_EVENT_LED_STATUS = 0x100,
OPAL_EVENT_PCI_ERROR = 0x200,
powerpc/powernv Platform dump interface This enables support for userspace to fetch and initiate FSP and Platform dumps from the service processor (via firmware) through sysfs. Based on original patch from Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Flow: - We register for OPAL notification events. - OPAL sends new dump available notification. - We make information on dump available via sysfs - Userspace requests dump contents - We retrieve the dump via OPAL interface - User copies the dump data - userspace sends ack for dump - We send ACK to OPAL. sysfs files: - We add the /sys/firmware/opal/dump directory - echoing 1 (well, anything, but in future we may support different dump types) to /sys/firmware/opal/dump/initiate_dump will initiate a dump. - Each dump that we've been notified of gets a directory in /sys/firmware/opal/dump/ with a name of the dump type and ID (in hex, as this is what's used elsewhere to identify the dump). - Each dump has files: id, type, dump and acknowledge dump is binary and is the dump itself. echoing 'ack' to acknowledge (currently any string will do) will acknowledge the dump and it will soon after disappear from sysfs. OPAL APIs: - opal_dump_init() - opal_dump_info() - opal_dump_read() - opal_dump_ack() - opal_dump_resend_notification() Currently we are only ever notified for one dump at a time (until the user explicitly acks the current dump, then we get a notification of the next dump), but this kernel code should "just work" when OPAL starts notifying us of all the dumps present. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-03 07:25:42 +08:00
OPAL_EVENT_DUMP_AVAIL = 0x400,
OPAL_EVENT_MSG_PENDING = 0x800,
};
enum OpalMessageType {
OPAL_MSG_ASYNC_COMP = 0, /* params[0] = token, params[1] = rc,
* additional params function-specific
*/
OPAL_MSG_MEM_ERR,
OPAL_MSG_EPOW,
OPAL_MSG_SHUTDOWN,
OPAL_MSG_HMI_EVT,
OPAL_MSG_TYPE_MAX,
};
/* Machine check related definitions */
enum OpalMCE_Version {
OpalMCE_V1 = 1,
};
enum OpalMCE_Severity {
OpalMCE_SEV_NO_ERROR = 0,
OpalMCE_SEV_WARNING = 1,
OpalMCE_SEV_ERROR_SYNC = 2,
OpalMCE_SEV_FATAL = 3,
};
enum OpalMCE_Disposition {
OpalMCE_DISPOSITION_RECOVERED = 0,
OpalMCE_DISPOSITION_NOT_RECOVERED = 1,
};
enum OpalMCE_Initiator {
OpalMCE_INITIATOR_UNKNOWN = 0,
OpalMCE_INITIATOR_CPU = 1,
};
enum OpalMCE_ErrorType {
OpalMCE_ERROR_TYPE_UNKNOWN = 0,
OpalMCE_ERROR_TYPE_UE = 1,
OpalMCE_ERROR_TYPE_SLB = 2,
OpalMCE_ERROR_TYPE_ERAT = 3,
OpalMCE_ERROR_TYPE_TLB = 4,
};
enum OpalMCE_UeErrorType {
OpalMCE_UE_ERROR_INDETERMINATE = 0,
OpalMCE_UE_ERROR_IFETCH = 1,
OpalMCE_UE_ERROR_PAGE_TABLE_WALK_IFETCH = 2,
OpalMCE_UE_ERROR_LOAD_STORE = 3,
OpalMCE_UE_ERROR_PAGE_TABLE_WALK_LOAD_STORE = 4,
};
enum OpalMCE_SlbErrorType {
OpalMCE_SLB_ERROR_INDETERMINATE = 0,
OpalMCE_SLB_ERROR_PARITY = 1,
OpalMCE_SLB_ERROR_MULTIHIT = 2,
};
enum OpalMCE_EratErrorType {
OpalMCE_ERAT_ERROR_INDETERMINATE = 0,
OpalMCE_ERAT_ERROR_PARITY = 1,
OpalMCE_ERAT_ERROR_MULTIHIT = 2,
};
enum OpalMCE_TlbErrorType {
OpalMCE_TLB_ERROR_INDETERMINATE = 0,
OpalMCE_TLB_ERROR_PARITY = 1,
OpalMCE_TLB_ERROR_MULTIHIT = 2,
};
enum OpalThreadStatus {
OPAL_THREAD_INACTIVE = 0x0,
OPAL_THREAD_STARTED = 0x1,
OPAL_THREAD_UNAVAILABLE = 0x2 /* opal-v3 */
};
enum OpalPciBusCompare {
OpalPciBusAny = 0, /* Any bus number match */
OpalPciBus3Bits = 2, /* Match top 3 bits of bus number */
OpalPciBus4Bits = 3, /* Match top 4 bits of bus number */
OpalPciBus5Bits = 4, /* Match top 5 bits of bus number */
OpalPciBus6Bits = 5, /* Match top 6 bits of bus number */
OpalPciBus7Bits = 6, /* Match top 7 bits of bus number */
OpalPciBusAll = 7, /* Match bus number exactly */
};
enum OpalDeviceCompare {
OPAL_IGNORE_RID_DEVICE_NUMBER = 0,
OPAL_COMPARE_RID_DEVICE_NUMBER = 1
};
enum OpalFuncCompare {
OPAL_IGNORE_RID_FUNCTION_NUMBER = 0,
OPAL_COMPARE_RID_FUNCTION_NUMBER = 1
};
enum OpalPeAction {
OPAL_UNMAP_PE = 0,
OPAL_MAP_PE = 1
};
enum OpalPeltvAction {
OPAL_REMOVE_PE_FROM_DOMAIN = 0,
OPAL_ADD_PE_TO_DOMAIN = 1
};
enum OpalMveEnableAction {
OPAL_DISABLE_MVE = 0,
OPAL_ENABLE_MVE = 1
};
enum OpalM64EnableAction {
OPAL_DISABLE_M64 = 0,
OPAL_ENABLE_M64_SPLIT = 1,
OPAL_ENABLE_M64_NON_SPLIT = 2
};
enum OpalPciResetScope {
OPAL_PHB_COMPLETE = 1, OPAL_PCI_LINK = 2, OPAL_PHB_ERROR = 3,
OPAL_PCI_HOT_RESET = 4, OPAL_PCI_FUNDAMENTAL_RESET = 5,
OPAL_PCI_IODA_TABLE_RESET = 6,
};
enum OpalPciReinitScope {
OPAL_REINIT_PCI_DEV = 1000
};
enum OpalPciResetState {
OPAL_DEASSERT_RESET = 0,
OPAL_ASSERT_RESET = 1
};
enum OpalPciMaskAction {
OPAL_UNMASK_ERROR_TYPE = 0,
OPAL_MASK_ERROR_TYPE = 1
};
enum OpalSlotLedType {
OPAL_SLOT_LED_ID_TYPE = 0,
OPAL_SLOT_LED_FAULT_TYPE = 1
};
enum OpalLedAction {
OPAL_TURN_OFF_LED = 0,
OPAL_TURN_ON_LED = 1,
OPAL_QUERY_LED_STATE_AFTER_BUSY = 2
};
enum OpalEpowStatus {
OPAL_EPOW_NONE = 0,
OPAL_EPOW_UPS = 1,
OPAL_EPOW_OVER_AMBIENT_TEMP = 2,
OPAL_EPOW_OVER_INTERNAL_TEMP = 3
};
/*
* Address cycle types for LPC accesses. These also correspond
* to the content of the first cell of the "reg" property for
* device nodes on the LPC bus
*/
enum OpalLPCAddressType {
OPAL_LPC_MEM = 0,
OPAL_LPC_IO = 1,
OPAL_LPC_FW = 2,
};
/* System parameter permission */
enum OpalSysparamPerm {
OPAL_SYSPARAM_READ = 0x1,
OPAL_SYSPARAM_WRITE = 0x2,
OPAL_SYSPARAM_RW = (OPAL_SYSPARAM_READ | OPAL_SYSPARAM_WRITE),
};
struct opal_msg {
__be32 msg_type;
__be32 reserved;
__be64 params[8];
};
struct opal_machine_check_event {
enum OpalMCE_Version version:8; /* 0x00 */
uint8_t in_use; /* 0x01 */
enum OpalMCE_Severity severity:8; /* 0x02 */
enum OpalMCE_Initiator initiator:8; /* 0x03 */
enum OpalMCE_ErrorType error_type:8; /* 0x04 */
enum OpalMCE_Disposition disposition:8; /* 0x05 */
uint8_t reserved_1[2]; /* 0x06 */
uint64_t gpr3; /* 0x08 */
uint64_t srr0; /* 0x10 */
uint64_t srr1; /* 0x18 */
union { /* 0x20 */
struct {
enum OpalMCE_UeErrorType ue_error_type:8;
uint8_t effective_address_provided;
uint8_t physical_address_provided;
uint8_t reserved_1[5];
uint64_t effective_address;
uint64_t physical_address;
uint8_t reserved_2[8];
} ue_error;
struct {
enum OpalMCE_SlbErrorType slb_error_type:8;
uint8_t effective_address_provided;
uint8_t reserved_1[6];
uint64_t effective_address;
uint8_t reserved_2[16];
} slb_error;
struct {
enum OpalMCE_EratErrorType erat_error_type:8;
uint8_t effective_address_provided;
uint8_t reserved_1[6];
uint64_t effective_address;
uint8_t reserved_2[16];
} erat_error;
struct {
enum OpalMCE_TlbErrorType tlb_error_type:8;
uint8_t effective_address_provided;
uint8_t reserved_1[6];
uint64_t effective_address;
uint8_t reserved_2[16];
} tlb_error;
} u;
};
/* FSP memory errors handling */
enum OpalMemErr_Version {
OpalMemErr_V1 = 1,
};
enum OpalMemErrType {
OPAL_MEM_ERR_TYPE_RESILIENCE = 0,
OPAL_MEM_ERR_TYPE_DYN_DALLOC,
OPAL_MEM_ERR_TYPE_SCRUB,
};
/* Memory Reilience error type */
enum OpalMemErr_ResilErrType {
OPAL_MEM_RESILIENCE_CE = 0,
OPAL_MEM_RESILIENCE_UE,
OPAL_MEM_RESILIENCE_UE_SCRUB,
};
/* Dynamic Memory Deallocation type */
enum OpalMemErr_DynErrType {
OPAL_MEM_DYNAMIC_DEALLOC = 0,
};
/* OpalMemoryErrorData->flags */
#define OPAL_MEM_CORRECTED_ERROR 0x0001
#define OPAL_MEM_THRESHOLD_EXCEEDED 0x0002
#define OPAL_MEM_ACK_REQUIRED 0x8000
struct OpalMemoryErrorData {
enum OpalMemErr_Version version:8; /* 0x00 */
enum OpalMemErrType type:8; /* 0x01 */
__be16 flags; /* 0x02 */
uint8_t reserved_1[4]; /* 0x04 */
union {
/* Memory Resilience corrected/uncorrected error info */
struct {
enum OpalMemErr_ResilErrType resil_err_type:8;
uint8_t reserved_1[7];
__be64 physical_address_start;
__be64 physical_address_end;
} resilience;
/* Dynamic memory deallocation error info */
struct {
enum OpalMemErr_DynErrType dyn_err_type:8;
uint8_t reserved_1[7];
__be64 physical_address_start;
__be64 physical_address_end;
} dyn_dealloc;
} u;
};
/* HMI interrupt event */
enum OpalHMI_Version {
OpalHMIEvt_V1 = 1,
};
enum OpalHMI_Severity {
OpalHMI_SEV_NO_ERROR = 0,
OpalHMI_SEV_WARNING = 1,
OpalHMI_SEV_ERROR_SYNC = 2,
OpalHMI_SEV_FATAL = 3,
};
enum OpalHMI_Disposition {
OpalHMI_DISPOSITION_RECOVERED = 0,
OpalHMI_DISPOSITION_NOT_RECOVERED = 1,
};
enum OpalHMI_ErrType {
OpalHMI_ERROR_MALFUNC_ALERT = 0,
OpalHMI_ERROR_PROC_RECOV_DONE,
OpalHMI_ERROR_PROC_RECOV_DONE_AGAIN,
OpalHMI_ERROR_PROC_RECOV_MASKED,
OpalHMI_ERROR_TFAC,
OpalHMI_ERROR_TFMR_PARITY,
OpalHMI_ERROR_HA_OVERFLOW_WARN,
OpalHMI_ERROR_XSCOM_FAIL,
OpalHMI_ERROR_XSCOM_DONE,
OpalHMI_ERROR_SCOM_FIR,
OpalHMI_ERROR_DEBUG_TRIG_FIR,
OpalHMI_ERROR_HYP_RESOURCE,
};
struct OpalHMIEvent {
uint8_t version; /* 0x00 */
uint8_t severity; /* 0x01 */
uint8_t type; /* 0x02 */
uint8_t disposition; /* 0x03 */
uint8_t reserved_1[4]; /* 0x04 */
__be64 hmer;
/* TFMR register. Valid only for TFAC and TFMR_PARITY error type. */
__be64 tfmr;
};
enum {
OPAL_P7IOC_DIAG_TYPE_NONE = 0,
OPAL_P7IOC_DIAG_TYPE_RGC = 1,
OPAL_P7IOC_DIAG_TYPE_BI = 2,
OPAL_P7IOC_DIAG_TYPE_CI = 3,
OPAL_P7IOC_DIAG_TYPE_MISC = 4,
OPAL_P7IOC_DIAG_TYPE_I2C = 5,
OPAL_P7IOC_DIAG_TYPE_LAST = 6
};
struct OpalIoP7IOCErrorData {
__be16 type;
/* GEM */
__be64 gemXfir;
__be64 gemRfir;
__be64 gemRirqfir;
__be64 gemMask;
__be64 gemRwof;
/* LEM */
__be64 lemFir;
__be64 lemErrMask;
__be64 lemAction0;
__be64 lemAction1;
__be64 lemWof;
union {
struct OpalIoP7IOCRgcErrorData {
__be64 rgcStatus; /* 3E1C10 */
__be64 rgcLdcp; /* 3E1C18 */
}rgc;
struct OpalIoP7IOCBiErrorData {
__be64 biLdcp0; /* 3C0100, 3C0118 */
__be64 biLdcp1; /* 3C0108, 3C0120 */
__be64 biLdcp2; /* 3C0110, 3C0128 */
__be64 biFenceStatus; /* 3C0130, 3C0130 */
u8 biDownbound; /* BI Downbound or Upbound */
}bi;
struct OpalIoP7IOCCiErrorData {
__be64 ciPortStatus; /* 3Dn008 */
__be64 ciPortLdcp; /* 3Dn010 */
u8 ciPort; /* Index of CI port: 0/1 */
}ci;
};
};
/**
* This structure defines the overlay which will be used to store PHB error
* data upon request.
*/
enum {
OPAL_PHB_ERROR_DATA_VERSION_1 = 1,
};
enum {
OPAL_PHB_ERROR_DATA_TYPE_P7IOC = 1,
OPAL_PHB_ERROR_DATA_TYPE_PHB3 = 2
};
enum {
OPAL_P7IOC_NUM_PEST_REGS = 128,
OPAL_PHB3_NUM_PEST_REGS = 256
};
struct OpalIoPhbErrorCommon {
__be32 version;
__be32 ioType;
__be32 len;
};
struct OpalIoP7IOCPhbErrorData {
struct OpalIoPhbErrorCommon common;
__be32 brdgCtl;
// P7IOC utl regs
__be32 portStatusReg;
__be32 rootCmplxStatus;
__be32 busAgentStatus;
// P7IOC cfg regs
__be32 deviceStatus;
__be32 slotStatus;
__be32 linkStatus;
__be32 devCmdStatus;
__be32 devSecStatus;
// cfg AER regs
__be32 rootErrorStatus;
__be32 uncorrErrorStatus;
__be32 corrErrorStatus;
__be32 tlpHdr1;
__be32 tlpHdr2;
__be32 tlpHdr3;
__be32 tlpHdr4;
__be32 sourceId;
__be32 rsv3;
// Record data about the call to allocate a buffer.
__be64 errorClass;
__be64 correlator;
//P7IOC MMIO Error Regs
__be64 p7iocPlssr; // n120
__be64 p7iocCsr; // n110
__be64 lemFir; // nC00
__be64 lemErrorMask; // nC18
__be64 lemWOF; // nC40
__be64 phbErrorStatus; // nC80
__be64 phbFirstErrorStatus; // nC88
__be64 phbErrorLog0; // nCC0
__be64 phbErrorLog1; // nCC8
__be64 mmioErrorStatus; // nD00
__be64 mmioFirstErrorStatus; // nD08
__be64 mmioErrorLog0; // nD40
__be64 mmioErrorLog1; // nD48
__be64 dma0ErrorStatus; // nD80
__be64 dma0FirstErrorStatus; // nD88
__be64 dma0ErrorLog0; // nDC0
__be64 dma0ErrorLog1; // nDC8
__be64 dma1ErrorStatus; // nE00
__be64 dma1FirstErrorStatus; // nE08
__be64 dma1ErrorLog0; // nE40
__be64 dma1ErrorLog1; // nE48
__be64 pestA[OPAL_P7IOC_NUM_PEST_REGS];
__be64 pestB[OPAL_P7IOC_NUM_PEST_REGS];
};
struct OpalIoPhb3ErrorData {
struct OpalIoPhbErrorCommon common;
__be32 brdgCtl;
/* PHB3 UTL regs */
__be32 portStatusReg;
__be32 rootCmplxStatus;
__be32 busAgentStatus;
/* PHB3 cfg regs */
__be32 deviceStatus;
__be32 slotStatus;
__be32 linkStatus;
__be32 devCmdStatus;
__be32 devSecStatus;
/* cfg AER regs */
__be32 rootErrorStatus;
__be32 uncorrErrorStatus;
__be32 corrErrorStatus;
__be32 tlpHdr1;
__be32 tlpHdr2;
__be32 tlpHdr3;
__be32 tlpHdr4;
__be32 sourceId;
__be32 rsv3;
/* Record data about the call to allocate a buffer */
__be64 errorClass;
__be64 correlator;
__be64 nFir; /* 000 */
__be64 nFirMask; /* 003 */
__be64 nFirWOF; /* 008 */
/* PHB3 MMIO Error Regs */
__be64 phbPlssr; /* 120 */
__be64 phbCsr; /* 110 */
__be64 lemFir; /* C00 */
__be64 lemErrorMask; /* C18 */
__be64 lemWOF; /* C40 */
__be64 phbErrorStatus; /* C80 */
__be64 phbFirstErrorStatus; /* C88 */
__be64 phbErrorLog0; /* CC0 */
__be64 phbErrorLog1; /* CC8 */
__be64 mmioErrorStatus; /* D00 */
__be64 mmioFirstErrorStatus; /* D08 */
__be64 mmioErrorLog0; /* D40 */
__be64 mmioErrorLog1; /* D48 */
__be64 dma0ErrorStatus; /* D80 */
__be64 dma0FirstErrorStatus; /* D88 */
__be64 dma0ErrorLog0; /* DC0 */
__be64 dma0ErrorLog1; /* DC8 */
__be64 dma1ErrorStatus; /* E00 */
__be64 dma1FirstErrorStatus; /* E08 */
__be64 dma1ErrorLog0; /* E40 */
__be64 dma1ErrorLog1; /* E48 */
__be64 pestA[OPAL_PHB3_NUM_PEST_REGS];
__be64 pestB[OPAL_PHB3_NUM_PEST_REGS];
};
enum {
OPAL_REINIT_CPUS_HILE_BE = (1 << 0),
OPAL_REINIT_CPUS_HILE_LE = (1 << 1),
};
typedef struct oppanel_line {
const char * line;
uint64_t line_len;
} oppanel_line_t;
/* /sys/firmware/opal */
extern struct kobject *opal_kobj;
/* /ibm,opal */
extern struct device_node *opal_node;
/* API functions */
int64_t opal_invalid_call(void);
int64_t opal_console_write(int64_t term_number, __be64 *length,
const uint8_t *buffer);
int64_t opal_console_read(int64_t term_number, __be64 *length,
uint8_t *buffer);
int64_t opal_console_write_buffer_space(int64_t term_number,
__be64 *length);
int64_t opal_rtc_read(__be32 *year_month_day,
__be64 *hour_minute_second_millisecond);
int64_t opal_rtc_write(uint32_t year_month_day,
uint64_t hour_minute_second_millisecond);
int64_t opal_cec_power_down(uint64_t request);
int64_t opal_cec_reboot(void);
int64_t opal_read_nvram(uint64_t buffer, uint64_t size, uint64_t offset);
int64_t opal_write_nvram(uint64_t buffer, uint64_t size, uint64_t offset);
int64_t opal_handle_interrupt(uint64_t isn, __be64 *outstanding_event_mask);
int64_t opal_poll_events(__be64 *outstanding_event_mask);
int64_t opal_pci_set_hub_tce_memory(uint64_t hub_id, uint64_t tce_mem_addr,
uint64_t tce_mem_size);
int64_t opal_pci_set_phb_tce_memory(uint64_t phb_id, uint64_t tce_mem_addr,
uint64_t tce_mem_size);
int64_t opal_pci_config_read_byte(uint64_t phb_id, uint64_t bus_dev_func,
uint64_t offset, uint8_t *data);
int64_t opal_pci_config_read_half_word(uint64_t phb_id, uint64_t bus_dev_func,
uint64_t offset, __be16 *data);
int64_t opal_pci_config_read_word(uint64_t phb_id, uint64_t bus_dev_func,
uint64_t offset, __be32 *data);
int64_t opal_pci_config_write_byte(uint64_t phb_id, uint64_t bus_dev_func,
uint64_t offset, uint8_t data);
int64_t opal_pci_config_write_half_word(uint64_t phb_id, uint64_t bus_dev_func,
uint64_t offset, uint16_t data);
int64_t opal_pci_config_write_word(uint64_t phb_id, uint64_t bus_dev_func,
uint64_t offset, uint32_t data);
int64_t opal_set_xive(uint32_t isn, uint16_t server, uint8_t priority);
int64_t opal_get_xive(uint32_t isn, __be16 *server, uint8_t *priority);
int64_t opal_register_exception_handler(uint64_t opal_exception,
uint64_t handler_address,
uint64_t glue_cache_line);
int64_t opal_pci_eeh_freeze_status(uint64_t phb_id, uint64_t pe_number,
uint8_t *freeze_state,
__be16 *pci_error_type,
__be64 *phb_status);
int64_t opal_pci_eeh_freeze_clear(uint64_t phb_id, uint64_t pe_number,
uint64_t eeh_action_token);
int64_t opal_pci_eeh_freeze_set(uint64_t phb_id, uint64_t pe_number,
uint64_t eeh_action_token);
int64_t opal_pci_shpc(uint64_t phb_id, uint64_t shpc_action, uint8_t *state);
int64_t opal_pci_phb_mmio_enable(uint64_t phb_id, uint16_t window_type,
uint16_t window_num, uint16_t enable);
int64_t opal_pci_set_phb_mem_window(uint64_t phb_id, uint16_t window_type,
uint16_t window_num,
uint64_t starting_real_address,
uint64_t starting_pci_address,
uint64_t size);
int64_t opal_pci_map_pe_mmio_window(uint64_t phb_id, uint16_t pe_number,
uint16_t window_type, uint16_t window_num,
uint16_t segment_num);
int64_t opal_pci_set_phb_table_memory(uint64_t phb_id, uint64_t rtt_addr,
uint64_t ivt_addr, uint64_t ivt_len,
uint64_t reject_array_addr,
uint64_t peltv_addr);
int64_t opal_pci_set_pe(uint64_t phb_id, uint64_t pe_number, uint64_t bus_dev_func,
uint8_t bus_compare, uint8_t dev_compare, uint8_t func_compare,
uint8_t pe_action);
int64_t opal_pci_set_peltv(uint64_t phb_id, uint32_t parent_pe, uint32_t child_pe,
uint8_t state);
int64_t opal_pci_set_mve(uint64_t phb_id, uint32_t mve_number, uint32_t pe_number);
int64_t opal_pci_set_mve_enable(uint64_t phb_id, uint32_t mve_number,
uint32_t state);
int64_t opal_pci_get_xive_reissue(uint64_t phb_id, uint32_t xive_number,
uint8_t *p_bit, uint8_t *q_bit);
int64_t opal_pci_set_xive_reissue(uint64_t phb_id, uint32_t xive_number,
uint8_t p_bit, uint8_t q_bit);
int64_t opal_pci_msi_eoi(uint64_t phb_id, uint32_t hw_irq);
int64_t opal_pci_set_xive_pe(uint64_t phb_id, uint32_t pe_number,
uint32_t xive_num);
int64_t opal_get_xive_source(uint64_t phb_id, uint32_t xive_num,
__be32 *interrupt_source_number);
int64_t opal_get_msi_32(uint64_t phb_id, uint32_t mve_number, uint32_t xive_num,
uint8_t msi_range, __be32 *msi_address,
__be32 *message_data);
int64_t opal_get_msi_64(uint64_t phb_id, uint32_t mve_number,
uint32_t xive_num, uint8_t msi_range,
__be64 *msi_address, __be32 *message_data);
int64_t opal_start_cpu(uint64_t thread_number, uint64_t start_address);
int64_t opal_query_cpu_status(uint64_t thread_number, uint8_t *thread_status);
int64_t opal_write_oppanel(oppanel_line_t *lines, uint64_t num_lines);
int64_t opal_pci_map_pe_dma_window(uint64_t phb_id, uint16_t pe_number, uint16_t window_id,
uint16_t tce_levels, uint64_t tce_table_addr,
uint64_t tce_table_size, uint64_t tce_page_size);
int64_t opal_pci_map_pe_dma_window_real(uint64_t phb_id, uint16_t pe_number,
uint16_t dma_window_number, uint64_t pci_start_addr,
uint64_t pci_mem_size);
int64_t opal_pci_reset(uint64_t phb_id, uint8_t reset_scope, uint8_t assert_state);
int64_t opal_pci_get_hub_diag_data(uint64_t hub_id, void *diag_buffer,
uint64_t diag_buffer_len);
int64_t opal_pci_get_phb_diag_data(uint64_t phb_id, void *diag_buffer,
uint64_t diag_buffer_len);
int64_t opal_pci_get_phb_diag_data2(uint64_t phb_id, void *diag_buffer,
uint64_t diag_buffer_len);
int64_t opal_pci_fence_phb(uint64_t phb_id);
int64_t opal_pci_reinit(uint64_t phb_id, uint64_t reinit_scope, uint64_t data);
int64_t opal_pci_mask_pe_error(uint64_t phb_id, uint16_t pe_number, uint8_t error_type, uint8_t mask_action);
int64_t opal_set_slot_led_status(uint64_t phb_id, uint64_t slot_id, uint8_t led_type, uint8_t led_action);
int64_t opal_get_epow_status(__be64 *status);
int64_t opal_set_system_attention_led(uint8_t led_action);
int64_t opal_pci_next_error(uint64_t phb_id, __be64 *first_frozen_pe,
__be16 *pci_error_type, __be16 *severity);
int64_t opal_pci_poll(uint64_t phb_id);
int64_t opal_return_cpu(void);
int64_t opal_reinit_cpus(uint64_t flags);
int64_t opal_xscom_read(uint32_t gcid, uint64_t pcb_addr, __be64 *val);
int64_t opal_xscom_write(uint32_t gcid, uint64_t pcb_addr, uint64_t val);
int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type,
uint32_t addr, uint32_t data, uint32_t sz);
int64_t opal_lpc_read(uint32_t chip_id, enum OpalLPCAddressType addr_type,
uint32_t addr, __be32 *data, uint32_t sz);
powerpc/powernv: Read OPAL error log and export it through sysfs Based on a patch by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> This patch adds support to read error logs from OPAL and export them to userspace through a sysfs interface. We export each log entry as a directory in /sys/firmware/opal/elog/ Currently, OPAL will buffer up to 128 error log records, we don't need to have any knowledge of this limit on the Linux side as that is actually largely transparent to us. Each error log entry has the following files: id, type, acknowledge, raw. Currently we just export the raw binary error log in the 'raw' attribute. In a future patch, we may parse more of the error log to make it a bit easier for userspace (e.g. to be able to display a brief summary in petitboot without having to have a full parser). If we have >128 logs from OPAL, we'll only be notified of 128 until userspace starts acknowledging them. This limitation may be lifted in the future and with this patch, that should "just work" from the linux side. A userspace daemon should: - wait for error log entries using normal mechanisms (we announce creation) - read error log entry - save error log entry safely to disk - acknowledge the error log entry - rinse, repeat. On the Linux side, we read the error log when we're notified of it. This possibly isn't ideal as it would be better to only read them on-demand. However, this doesn't really work with current OPAL interface, so we read the error log immediately when notified at the moment. I've tested this pretty extensively and am rather confident that the linux side of things works rather well. There is currently an issue with the service processor side of things for >128 error logs though. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-28 08:58:32 +08:00
int64_t opal_read_elog(uint64_t buffer, uint64_t size, uint64_t log_id);
int64_t opal_get_elog_size(__be64 *log_id, __be64 *size, __be64 *elog_type);
powerpc/powernv: Read OPAL error log and export it through sysfs Based on a patch by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> This patch adds support to read error logs from OPAL and export them to userspace through a sysfs interface. We export each log entry as a directory in /sys/firmware/opal/elog/ Currently, OPAL will buffer up to 128 error log records, we don't need to have any knowledge of this limit on the Linux side as that is actually largely transparent to us. Each error log entry has the following files: id, type, acknowledge, raw. Currently we just export the raw binary error log in the 'raw' attribute. In a future patch, we may parse more of the error log to make it a bit easier for userspace (e.g. to be able to display a brief summary in petitboot without having to have a full parser). If we have >128 logs from OPAL, we'll only be notified of 128 until userspace starts acknowledging them. This limitation may be lifted in the future and with this patch, that should "just work" from the linux side. A userspace daemon should: - wait for error log entries using normal mechanisms (we announce creation) - read error log entry - save error log entry safely to disk - acknowledge the error log entry - rinse, repeat. On the Linux side, we read the error log when we're notified of it. This possibly isn't ideal as it would be better to only read them on-demand. However, this doesn't really work with current OPAL interface, so we read the error log immediately when notified at the moment. I've tested this pretty extensively and am rather confident that the linux side of things works rather well. There is currently an issue with the service processor side of things for >128 error logs though. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-28 08:58:32 +08:00
int64_t opal_write_elog(uint64_t buffer, uint64_t size, uint64_t offset);
int64_t opal_send_ack_elog(uint64_t log_id);
void opal_resend_pending_logs(void);
int64_t opal_validate_flash(uint64_t buffer, uint32_t *size, uint32_t *result);
int64_t opal_manage_flash(uint8_t op);
int64_t opal_update_flash(uint64_t blk_list);
powerpc/powernv Platform dump interface This enables support for userspace to fetch and initiate FSP and Platform dumps from the service processor (via firmware) through sysfs. Based on original patch from Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Flow: - We register for OPAL notification events. - OPAL sends new dump available notification. - We make information on dump available via sysfs - Userspace requests dump contents - We retrieve the dump via OPAL interface - User copies the dump data - userspace sends ack for dump - We send ACK to OPAL. sysfs files: - We add the /sys/firmware/opal/dump directory - echoing 1 (well, anything, but in future we may support different dump types) to /sys/firmware/opal/dump/initiate_dump will initiate a dump. - Each dump that we've been notified of gets a directory in /sys/firmware/opal/dump/ with a name of the dump type and ID (in hex, as this is what's used elsewhere to identify the dump). - Each dump has files: id, type, dump and acknowledge dump is binary and is the dump itself. echoing 'ack' to acknowledge (currently any string will do) will acknowledge the dump and it will soon after disappear from sysfs. OPAL APIs: - opal_dump_init() - opal_dump_info() - opal_dump_read() - opal_dump_ack() - opal_dump_resend_notification() Currently we are only ever notified for one dump at a time (until the user explicitly acks the current dump, then we get a notification of the next dump), but this kernel code should "just work" when OPAL starts notifying us of all the dumps present. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-03 07:25:42 +08:00
int64_t opal_dump_init(uint8_t dump_type);
int64_t opal_dump_info(__be32 *dump_id, __be32 *dump_size);
int64_t opal_dump_info2(__be32 *dump_id, __be32 *dump_size, __be32 *dump_type);
powerpc/powernv Platform dump interface This enables support for userspace to fetch and initiate FSP and Platform dumps from the service processor (via firmware) through sysfs. Based on original patch from Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Flow: - We register for OPAL notification events. - OPAL sends new dump available notification. - We make information on dump available via sysfs - Userspace requests dump contents - We retrieve the dump via OPAL interface - User copies the dump data - userspace sends ack for dump - We send ACK to OPAL. sysfs files: - We add the /sys/firmware/opal/dump directory - echoing 1 (well, anything, but in future we may support different dump types) to /sys/firmware/opal/dump/initiate_dump will initiate a dump. - Each dump that we've been notified of gets a directory in /sys/firmware/opal/dump/ with a name of the dump type and ID (in hex, as this is what's used elsewhere to identify the dump). - Each dump has files: id, type, dump and acknowledge dump is binary and is the dump itself. echoing 'ack' to acknowledge (currently any string will do) will acknowledge the dump and it will soon after disappear from sysfs. OPAL APIs: - opal_dump_init() - opal_dump_info() - opal_dump_read() - opal_dump_ack() - opal_dump_resend_notification() Currently we are only ever notified for one dump at a time (until the user explicitly acks the current dump, then we get a notification of the next dump), but this kernel code should "just work" when OPAL starts notifying us of all the dumps present. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-03 07:25:42 +08:00
int64_t opal_dump_read(uint32_t dump_id, uint64_t buffer);
int64_t opal_dump_ack(uint32_t dump_id);
int64_t opal_dump_resend_notification(void);
int64_t opal_get_msg(uint64_t buffer, uint64_t size);
int64_t opal_check_completion(uint64_t buffer, uint64_t size, uint64_t token);
int64_t opal_sync_host_reboot(void);
int64_t opal_get_param(uint64_t token, uint32_t param_id, uint64_t buffer,
uint64_t length);
int64_t opal_set_param(uint64_t token, uint32_t param_id, uint64_t buffer,
uint64_t length);
int64_t opal_sensor_read(uint32_t sensor_hndl, int token, __be32 *sensor_data);
int64_t opal_handle_hmi(void);
int64_t opal_register_dump_region(uint32_t id, uint64_t start, uint64_t end);
int64_t opal_unregister_dump_region(uint32_t id);
/* Internal functions */
extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
int depth, void *data);
extern int early_init_dt_scan_recoverable_ranges(unsigned long node,
const char *uname, int depth, void *data);
extern int opal_get_chars(uint32_t vtermno, char *buf, int count);
extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len);
extern void hvc_opal_init_early(void);
extern int opal_notifier_register(struct notifier_block *nb);
extern int opal_notifier_unregister(struct notifier_block *nb);
extern int opal_message_notifier_register(enum OpalMessageType msg_type,
struct notifier_block *nb);
extern void opal_notifier_enable(void);
extern void opal_notifier_disable(void);
extern void opal_notifier_update_evt(uint64_t evt_mask, uint64_t evt_val);
extern int __opal_async_get_token(void);
extern int opal_async_get_token_interruptible(void);
extern int __opal_async_release_token(int token);
extern int opal_async_release_token(int token);
extern int opal_async_wait_response(uint64_t token, struct opal_msg *msg);
extern int opal_get_sensor_data(u32 sensor_hndl, u32 *sensor_data);
struct rtc_time;
extern int opal_set_rtc_time(struct rtc_time *tm);
extern void opal_get_rtc_time(struct rtc_time *tm);
extern unsigned long opal_get_boot_time(void);
extern void opal_nvram_init(void);
extern void opal_flash_init(void);
extern void opal_flash_term_callback(void);
powerpc/powernv: Read OPAL error log and export it through sysfs Based on a patch by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> This patch adds support to read error logs from OPAL and export them to userspace through a sysfs interface. We export each log entry as a directory in /sys/firmware/opal/elog/ Currently, OPAL will buffer up to 128 error log records, we don't need to have any knowledge of this limit on the Linux side as that is actually largely transparent to us. Each error log entry has the following files: id, type, acknowledge, raw. Currently we just export the raw binary error log in the 'raw' attribute. In a future patch, we may parse more of the error log to make it a bit easier for userspace (e.g. to be able to display a brief summary in petitboot without having to have a full parser). If we have >128 logs from OPAL, we'll only be notified of 128 until userspace starts acknowledging them. This limitation may be lifted in the future and with this patch, that should "just work" from the linux side. A userspace daemon should: - wait for error log entries using normal mechanisms (we announce creation) - read error log entry - save error log entry safely to disk - acknowledge the error log entry - rinse, repeat. On the Linux side, we read the error log when we're notified of it. This possibly isn't ideal as it would be better to only read them on-demand. However, this doesn't really work with current OPAL interface, so we read the error log immediately when notified at the moment. I've tested this pretty extensively and am rather confident that the linux side of things works rather well. There is currently an issue with the service processor side of things for >128 error logs though. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-28 08:58:32 +08:00
extern int opal_elog_init(void);
powerpc/powernv Platform dump interface This enables support for userspace to fetch and initiate FSP and Platform dumps from the service processor (via firmware) through sysfs. Based on original patch from Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Flow: - We register for OPAL notification events. - OPAL sends new dump available notification. - We make information on dump available via sysfs - Userspace requests dump contents - We retrieve the dump via OPAL interface - User copies the dump data - userspace sends ack for dump - We send ACK to OPAL. sysfs files: - We add the /sys/firmware/opal/dump directory - echoing 1 (well, anything, but in future we may support different dump types) to /sys/firmware/opal/dump/initiate_dump will initiate a dump. - Each dump that we've been notified of gets a directory in /sys/firmware/opal/dump/ with a name of the dump type and ID (in hex, as this is what's used elsewhere to identify the dump). - Each dump has files: id, type, dump and acknowledge dump is binary and is the dump itself. echoing 'ack' to acknowledge (currently any string will do) will acknowledge the dump and it will soon after disappear from sysfs. OPAL APIs: - opal_dump_init() - opal_dump_info() - opal_dump_read() - opal_dump_ack() - opal_dump_resend_notification() Currently we are only ever notified for one dump at a time (until the user explicitly acks the current dump, then we get a notification of the next dump), but this kernel code should "just work" when OPAL starts notifying us of all the dumps present. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-03 07:25:42 +08:00
extern void opal_platform_dump_init(void);
extern void opal_sys_param_init(void);
extern void opal_msglog_init(void);
extern int opal_machine_check(struct pt_regs *regs);
extern bool opal_mce_check_early_recovery(struct pt_regs *regs);
extern int opal_hmi_exception_early(struct pt_regs *regs);
extern int opal_handle_hmi_exception(struct pt_regs *regs);
extern void opal_shutdown(void);
extern int opal_resync_timebase(void);
extern void opal_lpc_init(void);
struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr,
unsigned long vmalloc_size);
void opal_free_sg_list(struct opal_sg_list *sg);
/*
* Dump region ID range usable by the OS
*/
#define OPAL_DUMP_REGION_HOST_START 0x80
#define OPAL_DUMP_REGION_LOG_BUF 0x80
#define OPAL_DUMP_REGION_HOST_END 0xFF
#endif /* __ASSEMBLY__ */
#endif /* __OPAL_H */