OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
In some ways, the OMAP4 PRCM register layout is quite different than
the OMAP2/3 PRCM register layout. For example, on OMAP2/3, from a
register layout point of view, all CM instances were located in the CM
subsystem, and all PRM instances were located in the PRM subsystem.
OMAP4 changes this. Now, for example, some CM instances, such as
WKUP_CM and EMU_CM, are located in the system PRM subsystem. And a
"local PRCM" exists for the MPU - this PRCM combines registers that
would normally appear in both CM and PRM instances, but uses its own
register layout which matches neither the OMAP2/3 PRCM layout nor the
OMAP4 PRCM layout.
To try to deal with this, introduce some new functions, omap4_cminst*
and omap4_prminst*. The former is to be used when writing to a CM
instance register (no matter what subsystem or hardware module it
exists in), and the latter, similarly, with PRM instance registers.
To determine which "PRCM partition" to write to, the functions take a
PRCM instance ID argument. Subsequent patches add these partition IDs
to the OMAP4 powerdomain and clockdomain definitions.
As far as I can see, there's really no good way to handle these types
of register access inconsistencies. This patch seemed like the least
bad approach.
Moving forward, the long-term goal is to remove all direct PRCM
register access from the PM code. PRCM register access should go
through layers such as the powerdomain and clockdomain code that can
hide the details of how to interact with the specific hardware
variant.
While here, rename cm4xxx.c to cm44xx.c to match the naming convention
of the other OMAP4 PRCM files.
Thanks to Santosh Shilimkar <santosh.shilimkar@ti.com>, Rajendra Nayak
<rnayak@ti.com>, and Benoît Cousson <b-cousson@ti.com> for some comments.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 12:05:14 +08:00
|
|
|
/*
|
|
|
|
|
* OMAP4 Clock Management (CM) function prototypes
|
|
|
|
|
*
|
|
|
|
|
* Copyright (C) 2010 Nokia Corporation
|
|
|
|
|
* Paul Walmsley
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
|
*/
|
|
|
|
|
#ifndef __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
|
|
|
|
|
#define __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
|
|
|
|
|
|
2010-12-22 12:05:15 +08:00
|
|
|
extern bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs);
|
|
|
|
|
extern void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs);
|
|
|
|
|
extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs);
|
|
|
|
|
extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
|
|
|
|
|
extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
|
|
|
|
|
|
2011-07-10 19:56:30 +08:00
|
|
|
extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
|
2011-08-10 14:57:42 +08:00
|
|
|
|
|
|
|
|
# ifdef CONFIG_ARCH_OMAP4
|
|
|
|
|
extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
|
|
|
|
|
u16 clkctrl_offs);
|
2011-07-10 19:56:30 +08:00
|
|
|
|
2011-07-10 19:56:32 +08:00
|
|
|
extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
|
|
|
|
|
u16 clkctrl_offs);
|
|
|
|
|
extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
|
|
|
|
|
u16 clkctrl_offs);
|
|
|
|
|
|
2011-08-10 14:57:42 +08:00
|
|
|
# else
|
|
|
|
|
|
|
|
|
|
static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
|
|
|
|
|
u16 clkctrl_offs)
|
|
|
|
|
{
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
|
|
|
|
|
s16 cdoffs, u16 clkctrl_offs)
|
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
|
|
|
|
|
u16 clkctrl_offs)
|
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
# endif
|
|
|
|
|
|
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
In some ways, the OMAP4 PRCM register layout is quite different than
the OMAP2/3 PRCM register layout. For example, on OMAP2/3, from a
register layout point of view, all CM instances were located in the CM
subsystem, and all PRM instances were located in the PRM subsystem.
OMAP4 changes this. Now, for example, some CM instances, such as
WKUP_CM and EMU_CM, are located in the system PRM subsystem. And a
"local PRCM" exists for the MPU - this PRCM combines registers that
would normally appear in both CM and PRM instances, but uses its own
register layout which matches neither the OMAP2/3 PRCM layout nor the
OMAP4 PRCM layout.
To try to deal with this, introduce some new functions, omap4_cminst*
and omap4_prminst*. The former is to be used when writing to a CM
instance register (no matter what subsystem or hardware module it
exists in), and the latter, similarly, with PRM instance registers.
To determine which "PRCM partition" to write to, the functions take a
PRCM instance ID argument. Subsequent patches add these partition IDs
to the OMAP4 powerdomain and clockdomain definitions.
As far as I can see, there's really no good way to handle these types
of register access inconsistencies. This patch seemed like the least
bad approach.
Moving forward, the long-term goal is to remove all direct PRCM
register access from the PM code. PRCM register access should go
through layers such as the powerdomain and clockdomain code that can
hide the details of how to interact with the specific hardware
variant.
While here, rename cm4xxx.c to cm44xx.c to match the naming convention
of the other OMAP4 PRCM files.
Thanks to Santosh Shilimkar <santosh.shilimkar@ti.com>, Rajendra Nayak
<rnayak@ti.com>, and Benoît Cousson <b-cousson@ti.com> for some comments.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 12:05:14 +08:00
|
|
|
/*
|
|
|
|
|
* In an ideal world, we would not export these low-level functions,
|
|
|
|
|
* but this will probably take some time to fix properly
|
|
|
|
|
*/
|
|
|
|
|
extern u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx);
|
|
|
|
|
extern void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx);
|
|
|
|
|
extern u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
|
|
|
|
|
s16 inst, s16 idx);
|
2011-02-26 06:48:14 +08:00
|
|
|
extern u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, s16 inst,
|
|
|
|
|
s16 idx);
|
|
|
|
|
extern u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst,
|
|
|
|
|
s16 idx);
|
|
|
|
|
extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx,
|
|
|
|
|
u32 mask);
|
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
In some ways, the OMAP4 PRCM register layout is quite different than
the OMAP2/3 PRCM register layout. For example, on OMAP2/3, from a
register layout point of view, all CM instances were located in the CM
subsystem, and all PRM instances were located in the PRM subsystem.
OMAP4 changes this. Now, for example, some CM instances, such as
WKUP_CM and EMU_CM, are located in the system PRM subsystem. And a
"local PRCM" exists for the MPU - this PRCM combines registers that
would normally appear in both CM and PRM instances, but uses its own
register layout which matches neither the OMAP2/3 PRCM layout nor the
OMAP4 PRCM layout.
To try to deal with this, introduce some new functions, omap4_cminst*
and omap4_prminst*. The former is to be used when writing to a CM
instance register (no matter what subsystem or hardware module it
exists in), and the latter, similarly, with PRM instance registers.
To determine which "PRCM partition" to write to, the functions take a
PRCM instance ID argument. Subsequent patches add these partition IDs
to the OMAP4 powerdomain and clockdomain definitions.
As far as I can see, there's really no good way to handle these types
of register access inconsistencies. This patch seemed like the least
bad approach.
Moving forward, the long-term goal is to remove all direct PRCM
register access from the PM code. PRCM register access should go
through layers such as the powerdomain and clockdomain code that can
hide the details of how to interact with the specific hardware
variant.
While here, rename cm4xxx.c to cm44xx.c to match the naming convention
of the other OMAP4 PRCM files.
Thanks to Santosh Shilimkar <santosh.shilimkar@ti.com>, Rajendra Nayak
<rnayak@ti.com>, and Benoît Cousson <b-cousson@ti.com> for some comments.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 12:05:14 +08:00
|
|
|
|
|
|
|
|
#endif
|