linux/fs/gfs2/glock.c

2099 lines
51 KiB
C
Raw Normal View History

/*
* Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
* Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU General Public License version 2.
*/
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/buffer_head.h>
#include <linux/delay.h>
#include <linux/sort.h>
#include <linux/jhash.h>
#include <linux/kallsyms.h>
#include <linux/gfs2_ondisk.h>
#include <linux/list.h>
#include <linux/wait.h>
#include <linux/module.h>
#include <asm/uaccess.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
#include <linux/workqueue.h>
#include <linux/jiffies.h>
#include <linux/rcupdate.h>
#include <linux/rculist_bl.h>
#include <linux/bit_spinlock.h>
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
#include <linux/percpu.h>
#include "gfs2.h"
#include "incore.h"
#include "glock.h"
#include "glops.h"
#include "inode.h"
#include "lops.h"
#include "meta_io.h"
#include "quota.h"
#include "super.h"
#include "util.h"
#include "bmap.h"
#define CREATE_TRACE_POINTS
#include "trace_gfs2.h"
struct gfs2_glock_iter {
int hash; /* hash bucket index */
unsigned nhash; /* Index within current bucket */
struct gfs2_sbd *sdp; /* incore superblock */
struct gfs2_glock *gl; /* current glock struct */
loff_t last_pos; /* last position */
};
typedef void (*glock_examiner) (struct gfs2_glock * gl);
static void do_xmote(struct gfs2_glock *gl, struct gfs2_holder *gh, unsigned int target);
static struct dentry *gfs2_root;
static struct workqueue_struct *glock_workqueue;
struct workqueue_struct *gfs2_delete_workqueue;
static LIST_HEAD(lru_list);
static atomic_t lru_count = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(lru_lock);
#define GFS2_GL_HASH_SHIFT 15
#define GFS2_GL_HASH_SIZE (1 << GFS2_GL_HASH_SHIFT)
#define GFS2_GL_HASH_MASK (GFS2_GL_HASH_SIZE - 1)
static struct hlist_bl_head gl_hash_table[GFS2_GL_HASH_SIZE];
static struct dentry *gfs2_root;
/**
* gl_hash() - Turn glock number into hash bucket number
* @lock: The glock number
*
* Returns: The number of the corresponding hash bucket
*/
static unsigned int gl_hash(const struct gfs2_sbd *sdp,
const struct lm_lockname *name)
{
unsigned int h;
h = jhash(&name->ln_number, sizeof(u64), 0);
h = jhash(&name->ln_type, sizeof(unsigned int), h);
h = jhash(&sdp, sizeof(struct gfs2_sbd *), h);
h &= GFS2_GL_HASH_MASK;
return h;
}
static inline void spin_lock_bucket(unsigned int hash)
{
hlist_bl_lock(&gl_hash_table[hash]);
}
static inline void spin_unlock_bucket(unsigned int hash)
{
hlist_bl_unlock(&gl_hash_table[hash]);
}
static void gfs2_glock_dealloc(struct rcu_head *rcu)
{
struct gfs2_glock *gl = container_of(rcu, struct gfs2_glock, gl_rcu);
if (gl->gl_ops->go_flags & GLOF_ASPACE) {
kmem_cache_free(gfs2_glock_aspace_cachep, gl);
} else {
kfree(gl->gl_lksb.sb_lvbptr);
kmem_cache_free(gfs2_glock_cachep, gl);
}
}
void gfs2_glock_free(struct gfs2_glock *gl)
{
struct gfs2_sbd *sdp = gl->gl_sbd;
call_rcu(&gl->gl_rcu, gfs2_glock_dealloc);
if (atomic_dec_and_test(&sdp->sd_glock_disposal))
wake_up(&sdp->sd_glock_wait);
}
/**
* gfs2_glock_hold() - increment reference count on glock
* @gl: The glock to hold
*
*/
void gfs2_glock_hold(struct gfs2_glock *gl)
{
GLOCK_BUG_ON(gl, atomic_read(&gl->gl_ref) == 0);
atomic_inc(&gl->gl_ref);
}
/**
* demote_ok - Check to see if it's ok to unlock a glock
* @gl: the glock
*
* Returns: 1 if it's ok
*/
static int demote_ok(const struct gfs2_glock *gl)
{
const struct gfs2_glock_operations *glops = gl->gl_ops;
if (gl->gl_state == LM_ST_UNLOCKED)
return 0;
if (!list_empty(&gl->gl_holders))
return 0;
if (glops->go_demote_ok)
return glops->go_demote_ok(gl);
return 1;
}
void gfs2_glock_add_to_lru(struct gfs2_glock *gl)
{
spin_lock(&lru_lock);
if (!list_empty(&gl->gl_lru))
list_del_init(&gl->gl_lru);
else
atomic_inc(&lru_count);
list_add_tail(&gl->gl_lru, &lru_list);
set_bit(GLF_LRU, &gl->gl_flags);
spin_unlock(&lru_lock);
}
static void __gfs2_glock_remove_from_lru(struct gfs2_glock *gl)
{
if (!list_empty(&gl->gl_lru)) {
list_del_init(&gl->gl_lru);
atomic_dec(&lru_count);
clear_bit(GLF_LRU, &gl->gl_flags);
}
}
static void gfs2_glock_remove_from_lru(struct gfs2_glock *gl)
{
spin_lock(&lru_lock);
__gfs2_glock_remove_from_lru(gl);
spin_unlock(&lru_lock);
}
/**
* gfs2_glock_put_nolock() - Decrement reference count on glock
* @gl: The glock to put
*
* This function should only be used if the caller has its own reference
* to the glock, in addition to the one it is dropping.
*/
void gfs2_glock_put_nolock(struct gfs2_glock *gl)
{
if (atomic_dec_and_test(&gl->gl_ref))
GLOCK_BUG_ON(gl, 1);
}
/**
* gfs2_glock_put() - Decrement reference count on glock
* @gl: The glock to put
*
*/
void gfs2_glock_put(struct gfs2_glock *gl)
{
struct gfs2_sbd *sdp = gl->gl_sbd;
struct address_space *mapping = gfs2_glock2aspace(gl);
if (atomic_dec_and_lock(&gl->gl_ref, &lru_lock)) {
__gfs2_glock_remove_from_lru(gl);
spin_unlock(&lru_lock);
spin_lock_bucket(gl->gl_hash);
hlist_bl_del_rcu(&gl->gl_list);
spin_unlock_bucket(gl->gl_hash);
GLOCK_BUG_ON(gl, !list_empty(&gl->gl_holders));
GLOCK_BUG_ON(gl, mapping && mapping->nrpages);
trace_gfs2_glock_put(gl);
sdp->sd_lockstruct.ls_ops->lm_put_lock(gl);
}
}
/**
* search_bucket() - Find struct gfs2_glock by lock number
* @bucket: the bucket to search
* @name: The lock name
*
* Returns: NULL, or the struct gfs2_glock with the requested number
*/
static struct gfs2_glock *search_bucket(unsigned int hash,
const struct gfs2_sbd *sdp,
const struct lm_lockname *name)
{
struct gfs2_glock *gl;
struct hlist_bl_node *h;
hlist_bl_for_each_entry_rcu(gl, h, &gl_hash_table[hash], gl_list) {
if (!lm_name_equal(&gl->gl_name, name))
continue;
if (gl->gl_sbd != sdp)
continue;
if (atomic_inc_not_zero(&gl->gl_ref))
return gl;
}
return NULL;
}
/**
* may_grant - check if its ok to grant a new lock
* @gl: The glock
* @gh: The lock request which we wish to grant
*
* Returns: true if its ok to grant the lock
*/
static inline int may_grant(const struct gfs2_glock *gl, const struct gfs2_holder *gh)
{
const struct gfs2_holder *gh_head = list_entry(gl->gl_holders.next, const struct gfs2_holder, gh_list);
if ((gh->gh_state == LM_ST_EXCLUSIVE ||
gh_head->gh_state == LM_ST_EXCLUSIVE) && gh != gh_head)
return 0;
if (gl->gl_state == gh->gh_state)
return 1;
if (gh->gh_flags & GL_EXACT)
return 0;
if (gl->gl_state == LM_ST_EXCLUSIVE) {
if (gh->gh_state == LM_ST_SHARED && gh_head->gh_state == LM_ST_SHARED)
return 1;
if (gh->gh_state == LM_ST_DEFERRED && gh_head->gh_state == LM_ST_DEFERRED)
return 1;
}
if (gl->gl_state != LM_ST_UNLOCKED && (gh->gh_flags & LM_FLAG_ANY))
return 1;
return 0;
}
static void gfs2_holder_wake(struct gfs2_holder *gh)
{
clear_bit(HIF_WAIT, &gh->gh_iflags);
smp_mb__after_clear_bit();
wake_up_bit(&gh->gh_iflags, HIF_WAIT);
}
/**
* do_error - Something unexpected has happened during a lock request
*
*/
static inline void do_error(struct gfs2_glock *gl, const int ret)
{
struct gfs2_holder *gh, *tmp;
list_for_each_entry_safe(gh, tmp, &gl->gl_holders, gh_list) {
if (test_bit(HIF_HOLDER, &gh->gh_iflags))
continue;
if (ret & LM_OUT_ERROR)
gh->gh_error = -EIO;
else if (gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB))
gh->gh_error = GLR_TRYFAILED;
else
continue;
list_del_init(&gh->gh_list);
trace_gfs2_glock_queue(gh, 0);
gfs2_holder_wake(gh);
}
}
/**
* do_promote - promote as many requests as possible on the current queue
* @gl: The glock
*
* Returns: 1 if there is a blocked holder at the head of the list, or 2
* if a type specific operation is underway.
*/
static int do_promote(struct gfs2_glock *gl)
__releases(&gl->gl_spin)
__acquires(&gl->gl_spin)
{
const struct gfs2_glock_operations *glops = gl->gl_ops;
struct gfs2_holder *gh, *tmp;
int ret;
restart:
list_for_each_entry_safe(gh, tmp, &gl->gl_holders, gh_list) {
if (test_bit(HIF_HOLDER, &gh->gh_iflags))
continue;
if (may_grant(gl, gh)) {
if (gh->gh_list.prev == &gl->gl_holders &&
glops->go_lock) {
spin_unlock(&gl->gl_spin);
/* FIXME: eliminate this eventually */
ret = glops->go_lock(gh);
spin_lock(&gl->gl_spin);
if (ret) {
if (ret == 1)
return 2;
gh->gh_error = ret;
list_del_init(&gh->gh_list);
trace_gfs2_glock_queue(gh, 0);
gfs2_holder_wake(gh);
goto restart;
}
set_bit(HIF_HOLDER, &gh->gh_iflags);
trace_gfs2_promote(gh, 1);
gfs2_holder_wake(gh);
goto restart;
}
set_bit(HIF_HOLDER, &gh->gh_iflags);
trace_gfs2_promote(gh, 0);
gfs2_holder_wake(gh);
continue;
}
if (gh->gh_list.prev == &gl->gl_holders)
return 1;
do_error(gl, 0);
break;
}
return 0;
}
/**
* find_first_waiter - find the first gh that's waiting for the glock
* @gl: the glock
*/
static inline struct gfs2_holder *find_first_waiter(const struct gfs2_glock *gl)
{
struct gfs2_holder *gh;
list_for_each_entry(gh, &gl->gl_holders, gh_list) {
if (!test_bit(HIF_HOLDER, &gh->gh_iflags))
return gh;
}
return NULL;
}
/**
* state_change - record that the glock is now in a different state
* @gl: the glock
* @new_state the new state
*
*/
static void state_change(struct gfs2_glock *gl, unsigned int new_state)
{
int held1, held2;
held1 = (gl->gl_state != LM_ST_UNLOCKED);
held2 = (new_state != LM_ST_UNLOCKED);
if (held1 != held2) {
if (held2)
gfs2_glock_hold(gl);
else
gfs2_glock_put_nolock(gl);
}
if (held1 && held2 && list_empty(&gl->gl_holders))
clear_bit(GLF_QUEUED, &gl->gl_flags);
if (new_state != gl->gl_target)
/* shorten our minimum hold time */
gl->gl_hold_time = max(gl->gl_hold_time - GL_GLOCK_HOLD_DECR,
GL_GLOCK_MIN_HOLD);
gl->gl_state = new_state;
gl->gl_tchange = jiffies;
}
static void gfs2_demote_wake(struct gfs2_glock *gl)
{
gl->gl_demote_state = LM_ST_EXCLUSIVE;
clear_bit(GLF_DEMOTE, &gl->gl_flags);
smp_mb__after_clear_bit();
wake_up_bit(&gl->gl_flags, GLF_DEMOTE);
}
/**
* finish_xmote - The DLM has replied to one of our lock requests
* @gl: The glock
* @ret: The status from the DLM
*
*/
static void finish_xmote(struct gfs2_glock *gl, unsigned int ret)
{
const struct gfs2_glock_operations *glops = gl->gl_ops;
struct gfs2_holder *gh;
unsigned state = ret & LM_OUT_ST_MASK;
int rv;
spin_lock(&gl->gl_spin);
trace_gfs2_glock_state_change(gl, state);
state_change(gl, state);
gh = find_first_waiter(gl);
/* Demote to UN request arrived during demote to SH or DF */
if (test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags) &&
state != LM_ST_UNLOCKED && gl->gl_demote_state == LM_ST_UNLOCKED)
gl->gl_target = LM_ST_UNLOCKED;
/* Check for state != intended state */
if (unlikely(state != gl->gl_target)) {
if (gh && !test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags)) {
/* move to back of queue and try next entry */
if (ret & LM_OUT_CANCELED) {
if ((gh->gh_flags & LM_FLAG_PRIORITY) == 0)
list_move_tail(&gh->gh_list, &gl->gl_holders);
gh = find_first_waiter(gl);
gl->gl_target = gh->gh_state;
goto retry;
}
/* Some error or failed "try lock" - report it */
if ((ret & LM_OUT_ERROR) ||
(gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB))) {
gl->gl_target = gl->gl_state;
do_error(gl, ret);
goto out;
}
}
switch(state) {
/* Unlocked due to conversion deadlock, try again */
case LM_ST_UNLOCKED:
retry:
do_xmote(gl, gh, gl->gl_target);
break;
/* Conversion fails, unlock and try again */
case LM_ST_SHARED:
case LM_ST_DEFERRED:
do_xmote(gl, gh, LM_ST_UNLOCKED);
break;
default: /* Everything else */
printk(KERN_ERR "GFS2: wanted %u got %u\n", gl->gl_target, state);
GLOCK_BUG_ON(gl, 1);
}
spin_unlock(&gl->gl_spin);
return;
}
/* Fast path - we got what we asked for */
if (test_and_clear_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags))
gfs2_demote_wake(gl);
if (state != LM_ST_UNLOCKED) {
if (glops->go_xmote_bh) {
spin_unlock(&gl->gl_spin);
rv = glops->go_xmote_bh(gl, gh);
spin_lock(&gl->gl_spin);
if (rv) {
do_error(gl, rv);
goto out;
}
}
rv = do_promote(gl);
if (rv == 2)
goto out_locked;
}
out:
clear_bit(GLF_LOCK, &gl->gl_flags);
out_locked:
spin_unlock(&gl->gl_spin);
}
/**
* do_xmote - Calls the DLM to change the state of a lock
* @gl: The lock state
* @gh: The holder (only for promotes)
* @target: The target lock state
*
*/
static void do_xmote(struct gfs2_glock *gl, struct gfs2_holder *gh, unsigned int target)
__releases(&gl->gl_spin)
__acquires(&gl->gl_spin)
{
const struct gfs2_glock_operations *glops = gl->gl_ops;
struct gfs2_sbd *sdp = gl->gl_sbd;
unsigned int lck_flags = gh ? gh->gh_flags : 0;
int ret;
lck_flags &= (LM_FLAG_TRY | LM_FLAG_TRY_1CB | LM_FLAG_NOEXP |
LM_FLAG_PRIORITY);
GLOCK_BUG_ON(gl, gl->gl_state == target);
GLOCK_BUG_ON(gl, gl->gl_state == gl->gl_target);
if ((target == LM_ST_UNLOCKED || target == LM_ST_DEFERRED) &&
glops->go_inval) {
set_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags);
do_error(gl, 0); /* Fail queued try locks */
}
gl->gl_req = target;
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
set_bit(GLF_BLOCKING, &gl->gl_flags);
if ((gl->gl_req == LM_ST_UNLOCKED) ||
(gl->gl_state == LM_ST_EXCLUSIVE) ||
(lck_flags & (LM_FLAG_TRY|LM_FLAG_TRY_1CB)))
clear_bit(GLF_BLOCKING, &gl->gl_flags);
spin_unlock(&gl->gl_spin);
if (glops->go_sync)
glops->go_sync(gl);
if (test_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags))
glops->go_inval(gl, target == LM_ST_DEFERRED ? 0 : DIO_METADATA);
clear_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags);
gfs2_glock_hold(gl);
if (sdp->sd_lockstruct.ls_ops->lm_lock) {
/* lock_dlm */
ret = sdp->sd_lockstruct.ls_ops->lm_lock(gl, target, lck_flags);
if (ret) {
printk(KERN_ERR "GFS2: lm_lock ret %d\n", ret);
GLOCK_BUG_ON(gl, 1);
}
} else { /* lock_nolock */
finish_xmote(gl, target);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gfs2_glock_put(gl);
}
spin_lock(&gl->gl_spin);
}
/**
* find_first_holder - find the first "holder" gh
* @gl: the glock
*/
static inline struct gfs2_holder *find_first_holder(const struct gfs2_glock *gl)
{
struct gfs2_holder *gh;
if (!list_empty(&gl->gl_holders)) {
gh = list_entry(gl->gl_holders.next, struct gfs2_holder, gh_list);
if (test_bit(HIF_HOLDER, &gh->gh_iflags))
return gh;
}
return NULL;
}
/**
* run_queue - do all outstanding tasks related to a glock
* @gl: The glock in question
* @nonblock: True if we must not block in run_queue
*
*/
static void run_queue(struct gfs2_glock *gl, const int nonblock)
__releases(&gl->gl_spin)
__acquires(&gl->gl_spin)
{
struct gfs2_holder *gh = NULL;
int ret;
if (test_and_set_bit(GLF_LOCK, &gl->gl_flags))
return;
GLOCK_BUG_ON(gl, test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags));
if (test_bit(GLF_DEMOTE, &gl->gl_flags) &&
gl->gl_demote_state != gl->gl_state) {
if (find_first_holder(gl))
goto out_unlock;
if (nonblock)
goto out_sched;
set_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags);
GLOCK_BUG_ON(gl, gl->gl_demote_state == LM_ST_EXCLUSIVE);
gl->gl_target = gl->gl_demote_state;
} else {
if (test_bit(GLF_DEMOTE, &gl->gl_flags))
gfs2_demote_wake(gl);
ret = do_promote(gl);
if (ret == 0)
goto out_unlock;
if (ret == 2)
goto out;
gh = find_first_waiter(gl);
gl->gl_target = gh->gh_state;
if (!(gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)))
do_error(gl, 0); /* Fail queued try locks */
}
do_xmote(gl, gh, gl->gl_target);
out:
return;
out_sched:
clear_bit(GLF_LOCK, &gl->gl_flags);
smp_mb__after_clear_bit();
gfs2_glock_hold(gl);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gfs2_glock_put_nolock(gl);
return;
out_unlock:
clear_bit(GLF_LOCK, &gl->gl_flags);
smp_mb__after_clear_bit();
return;
}
static void delete_work_func(struct work_struct *work)
{
struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_delete);
struct gfs2_sbd *sdp = gl->gl_sbd;
struct gfs2_inode *ip;
struct inode *inode;
u64 no_addr = gl->gl_name.ln_number;
ip = gl->gl_object;
/* Note: Unsafe to dereference ip as we don't hold right refs/locks */
if (ip)
inode = gfs2_ilookup(sdp->sd_vfs, no_addr, 1);
else
inode = gfs2_lookup_by_inum(sdp, no_addr, NULL, GFS2_BLKST_UNLINKED);
if (inode && !IS_ERR(inode)) {
d_prune_aliases(inode);
iput(inode);
}
gfs2_glock_put(gl);
}
static void glock_work_func(struct work_struct *work)
{
unsigned long delay = 0;
struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_work.work);
int drop_ref = 0;
if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) {
finish_xmote(gl, gl->gl_reply);
drop_ref = 1;
}
spin_lock(&gl->gl_spin);
GFS2: Processes waiting on inode glock that no processes are holding This patch fixes a race in the GFS2 glock state machine that may result in lockups. The symptom is that all nodes but one will hang, waiting for a particular glock. All the holder records will have the "W" (Waiting) bit set. The other node will typically have the glock stuck in Exclusive mode (EX) with no holder records, but the dinode will be cached. In other words, an entry with "I:" will appear in the glock dump for that glock, but nothing else. The race has to do with the glock "Pending Demote" bit, which can be set, then immediately reset, thus losing the fact that another node needs the glock. The sequence of events is: 1. Something schedules the glock workqueue (e.g. glock request from fs) 2. The glock workqueue gets to the point between the test of the reply pending bit and the spin lock: if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) { finish_xmote(gl, gl->gl_reply); drop_ref = 1; } down_read(&gfs2_umount_flush_sem); <---- i.e. here spin_lock(&gl->gl_spin); 3. In comes (a) the reply to our EX lock request setting GLF_REPLY_PENDING and (b) the demote request which sets GLF_PENDING_DEMOTE 4. The following test is executed: if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) && gl->gl_state != LM_ST_UNLOCKED && gl->gl_demote_state != LM_ST_EXCLUSIVE) { This resets the pending demote flag, and gl->gl_demote_state is not equal to exclusive, however because the reply from the dlm arrived after we checked for the GLF_REPLY_PENDING flag, gl->gl_state is still equal to unlocked, so although we reset the GLF_PENDING_DEMOTE flag, we didn't then set the GLF_DEMOTE flag or reinstate the GLF_PENDING_DEMOTE_FLAG. The patch closes the timing window by only transitioning the "Pending demote" bit to the "demote" flag once we know the other conditions (not unlocked and not exclusive) are met. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-24 22:44:42 +08:00
if (test_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
gl->gl_state != LM_ST_UNLOCKED &&
gl->gl_demote_state != LM_ST_EXCLUSIVE) {
unsigned long holdtime, now = jiffies;
GFS2: Processes waiting on inode glock that no processes are holding This patch fixes a race in the GFS2 glock state machine that may result in lockups. The symptom is that all nodes but one will hang, waiting for a particular glock. All the holder records will have the "W" (Waiting) bit set. The other node will typically have the glock stuck in Exclusive mode (EX) with no holder records, but the dinode will be cached. In other words, an entry with "I:" will appear in the glock dump for that glock, but nothing else. The race has to do with the glock "Pending Demote" bit, which can be set, then immediately reset, thus losing the fact that another node needs the glock. The sequence of events is: 1. Something schedules the glock workqueue (e.g. glock request from fs) 2. The glock workqueue gets to the point between the test of the reply pending bit and the spin lock: if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) { finish_xmote(gl, gl->gl_reply); drop_ref = 1; } down_read(&gfs2_umount_flush_sem); <---- i.e. here spin_lock(&gl->gl_spin); 3. In comes (a) the reply to our EX lock request setting GLF_REPLY_PENDING and (b) the demote request which sets GLF_PENDING_DEMOTE 4. The following test is executed: if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) && gl->gl_state != LM_ST_UNLOCKED && gl->gl_demote_state != LM_ST_EXCLUSIVE) { This resets the pending demote flag, and gl->gl_demote_state is not equal to exclusive, however because the reply from the dlm arrived after we checked for the GLF_REPLY_PENDING flag, gl->gl_state is still equal to unlocked, so although we reset the GLF_PENDING_DEMOTE flag, we didn't then set the GLF_DEMOTE flag or reinstate the GLF_PENDING_DEMOTE_FLAG. The patch closes the timing window by only transitioning the "Pending demote" bit to the "demote" flag once we know the other conditions (not unlocked and not exclusive) are met. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-24 22:44:42 +08:00
holdtime = gl->gl_tchange + gl->gl_hold_time;
if (time_before(now, holdtime))
delay = holdtime - now;
GFS2: Processes waiting on inode glock that no processes are holding This patch fixes a race in the GFS2 glock state machine that may result in lockups. The symptom is that all nodes but one will hang, waiting for a particular glock. All the holder records will have the "W" (Waiting) bit set. The other node will typically have the glock stuck in Exclusive mode (EX) with no holder records, but the dinode will be cached. In other words, an entry with "I:" will appear in the glock dump for that glock, but nothing else. The race has to do with the glock "Pending Demote" bit, which can be set, then immediately reset, thus losing the fact that another node needs the glock. The sequence of events is: 1. Something schedules the glock workqueue (e.g. glock request from fs) 2. The glock workqueue gets to the point between the test of the reply pending bit and the spin lock: if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) { finish_xmote(gl, gl->gl_reply); drop_ref = 1; } down_read(&gfs2_umount_flush_sem); <---- i.e. here spin_lock(&gl->gl_spin); 3. In comes (a) the reply to our EX lock request setting GLF_REPLY_PENDING and (b) the demote request which sets GLF_PENDING_DEMOTE 4. The following test is executed: if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) && gl->gl_state != LM_ST_UNLOCKED && gl->gl_demote_state != LM_ST_EXCLUSIVE) { This resets the pending demote flag, and gl->gl_demote_state is not equal to exclusive, however because the reply from the dlm arrived after we checked for the GLF_REPLY_PENDING flag, gl->gl_state is still equal to unlocked, so although we reset the GLF_PENDING_DEMOTE flag, we didn't then set the GLF_DEMOTE flag or reinstate the GLF_PENDING_DEMOTE_FLAG. The patch closes the timing window by only transitioning the "Pending demote" bit to the "demote" flag once we know the other conditions (not unlocked and not exclusive) are met. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-24 22:44:42 +08:00
if (!delay) {
clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags);
set_bit(GLF_DEMOTE, &gl->gl_flags);
}
}
run_queue(gl, 0);
spin_unlock(&gl->gl_spin);
if (!delay)
gfs2_glock_put(gl);
else {
if (gl->gl_name.ln_type != LM_TYPE_INODE)
delay = 0;
if (queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0)
gfs2_glock_put(gl);
}
if (drop_ref)
gfs2_glock_put(gl);
}
/**
* gfs2_glock_get() - Get a glock, or create one if one doesn't exist
* @sdp: The GFS2 superblock
* @number: the lock number
* @glops: The glock_operations to use
* @create: If 0, don't create the glock if it doesn't exist
* @glp: the glock is returned here
*
* This does not lock a glock, just finds/creates structures for one.
*
* Returns: errno
*/
int gfs2_glock_get(struct gfs2_sbd *sdp, u64 number,
const struct gfs2_glock_operations *glops, int create,
struct gfs2_glock **glp)
{
struct super_block *s = sdp->sd_vfs;
struct lm_lockname name = { .ln_number = number, .ln_type = glops->go_type };
struct gfs2_glock *gl, *tmp;
unsigned int hash = gl_hash(sdp, &name);
struct address_space *mapping;
struct kmem_cache *cachep;
rcu_read_lock();
gl = search_bucket(hash, sdp, &name);
rcu_read_unlock();
*glp = gl;
if (gl)
return 0;
if (!create)
return -ENOENT;
if (glops->go_flags & GLOF_ASPACE)
cachep = gfs2_glock_aspace_cachep;
else
cachep = gfs2_glock_cachep;
gl = kmem_cache_alloc(cachep, GFP_KERNEL);
if (!gl)
return -ENOMEM;
memset(&gl->gl_lksb, 0, sizeof(struct dlm_lksb));
if (glops->go_flags & GLOF_LVB) {
gl->gl_lksb.sb_lvbptr = kzalloc(GFS2_MIN_LVB_SIZE, GFP_KERNEL);
if (!gl->gl_lksb.sb_lvbptr) {
kmem_cache_free(cachep, gl);
return -ENOMEM;
}
}
atomic_inc(&sdp->sd_glock_disposal);
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
gl->gl_sbd = sdp;
gl->gl_flags = 0;
gl->gl_name = name;
atomic_set(&gl->gl_ref, 1);
gl->gl_state = LM_ST_UNLOCKED;
gl->gl_target = LM_ST_UNLOCKED;
gl->gl_demote_state = LM_ST_EXCLUSIVE;
gl->gl_hash = hash;
gl->gl_ops = glops;
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
gl->gl_dstamp = ktime_set(0, 0);
preempt_disable();
/* We use the global stats to estimate the initial per-glock stats */
gl->gl_stats = this_cpu_ptr(sdp->sd_lkstats)->lkstats[glops->go_type];
preempt_enable();
gl->gl_stats.stats[GFS2_LKS_DCOUNT] = 0;
gl->gl_stats.stats[GFS2_LKS_QCOUNT] = 0;
gl->gl_tchange = jiffies;
gl->gl_object = NULL;
gl->gl_hold_time = GL_GLOCK_DFT_HOLD;
INIT_DELAYED_WORK(&gl->gl_work, glock_work_func);
INIT_WORK(&gl->gl_delete, delete_work_func);
mapping = gfs2_glock2aspace(gl);
if (mapping) {
mapping->a_ops = &gfs2_meta_aops;
mapping->host = s->s_bdev->bd_inode;
mapping->flags = 0;
mapping_set_gfp_mask(mapping, GFP_NOFS);
mapping->private_data = NULL;
mapping->backing_dev_info = s->s_bdi;
mapping->writeback_index = 0;
}
spin_lock_bucket(hash);
tmp = search_bucket(hash, sdp, &name);
if (tmp) {
spin_unlock_bucket(hash);
kfree(gl->gl_lksb.sb_lvbptr);
kmem_cache_free(cachep, gl);
atomic_dec(&sdp->sd_glock_disposal);
gl = tmp;
} else {
hlist_bl_add_head_rcu(&gl->gl_list, &gl_hash_table[hash]);
spin_unlock_bucket(hash);
}
*glp = gl;
return 0;
}
/**
* gfs2_holder_init - initialize a struct gfs2_holder in the default way
* @gl: the glock
* @state: the state we're requesting
* @flags: the modifier flags
* @gh: the holder structure
*
*/
void gfs2_holder_init(struct gfs2_glock *gl, unsigned int state, unsigned flags,
struct gfs2_holder *gh)
{
INIT_LIST_HEAD(&gh->gh_list);
gh->gh_gl = gl;
gh->gh_ip = (unsigned long)__builtin_return_address(0);
gh->gh_owner_pid = get_pid(task_pid(current));
gh->gh_state = state;
gh->gh_flags = flags;
gh->gh_error = 0;
gh->gh_iflags = 0;
gfs2_glock_hold(gl);
}
/**
* gfs2_holder_reinit - reinitialize a struct gfs2_holder so we can requeue it
* @state: the state we're requesting
* @flags: the modifier flags
* @gh: the holder structure
*
* Don't mess with the glock.
*
*/
void gfs2_holder_reinit(unsigned int state, unsigned flags, struct gfs2_holder *gh)
{
gh->gh_state = state;
gh->gh_flags = flags;
gh->gh_iflags = 0;
gh->gh_ip = (unsigned long)__builtin_return_address(0);
if (gh->gh_owner_pid)
put_pid(gh->gh_owner_pid);
gh->gh_owner_pid = get_pid(task_pid(current));
}
/**
* gfs2_holder_uninit - uninitialize a holder structure (drop glock reference)
* @gh: the holder structure
*
*/
void gfs2_holder_uninit(struct gfs2_holder *gh)
{
put_pid(gh->gh_owner_pid);
gfs2_glock_put(gh->gh_gl);
gh->gh_gl = NULL;
gh->gh_ip = 0;
}
/**
* gfs2_glock_holder_wait
* @word: unused
*
* This function and gfs2_glock_demote_wait both show up in the WCHAN
* field. Thus I've separated these otherwise identical functions in
* order to be more informative to the user.
*/
static int gfs2_glock_holder_wait(void *word)
{
schedule();
return 0;
}
static int gfs2_glock_demote_wait(void *word)
{
schedule();
return 0;
}
/**
* gfs2_glock_wait - wait on a glock acquisition
* @gh: the glock holder
*
* Returns: 0 on success
*/
int gfs2_glock_wait(struct gfs2_holder *gh)
{
unsigned long time1 = jiffies;
might_sleep();
wait_on_bit(&gh->gh_iflags, HIF_WAIT, gfs2_glock_holder_wait, TASK_UNINTERRUPTIBLE);
if (time_after(jiffies, time1 + HZ)) /* have we waited > a second? */
/* Lengthen the minimum hold time. */
gh->gh_gl->gl_hold_time = min(gh->gh_gl->gl_hold_time +
GL_GLOCK_HOLD_INCR,
GL_GLOCK_MAX_HOLD);
return gh->gh_error;
}
/**
* handle_callback - process a demote request
* @gl: the glock
* @state: the state the caller wants us to change to
*
* There are only two requests that we are going to see in actual
* practise: LM_ST_SHARED and LM_ST_UNLOCKED
*/
static void handle_callback(struct gfs2_glock *gl, unsigned int state,
unsigned long delay)
{
int bit = delay ? GLF_PENDING_DEMOTE : GLF_DEMOTE;
set_bit(bit, &gl->gl_flags);
if (gl->gl_demote_state == LM_ST_EXCLUSIVE) {
gl->gl_demote_state = state;
gl->gl_demote_time = jiffies;
} else if (gl->gl_demote_state != LM_ST_UNLOCKED &&
gl->gl_demote_state != state) {
gl->gl_demote_state = LM_ST_UNLOCKED;
}
if (gl->gl_ops->go_callback)
gl->gl_ops->go_callback(gl);
trace_gfs2_demote_rq(gl);
}
void gfs2_print_dbg(struct seq_file *seq, const char *fmt, ...)
{
struct va_format vaf;
va_list args;
va_start(args, fmt);
if (seq) {
seq_vprintf(seq, fmt, args);
} else {
vaf.fmt = fmt;
vaf.va = &args;
printk(KERN_ERR " %pV", &vaf);
}
va_end(args);
}
/**
* add_to_queue - Add a holder to the wait queue (but look for recursion)
* @gh: the holder structure to add
*
* Eventually we should move the recursive locking trap to a
* debugging option or something like that. This is the fast
* path and needs to have the minimum number of distractions.
*
*/
static inline void add_to_queue(struct gfs2_holder *gh)
__releases(&gl->gl_spin)
__acquires(&gl->gl_spin)
{
struct gfs2_glock *gl = gh->gh_gl;
struct gfs2_sbd *sdp = gl->gl_sbd;
struct list_head *insert_pt = NULL;
struct gfs2_holder *gh2;
int try_futile = 0;
BUG_ON(gh->gh_owner_pid == NULL);
if (test_and_set_bit(HIF_WAIT, &gh->gh_iflags))
BUG();
if (gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)) {
if (test_bit(GLF_LOCK, &gl->gl_flags))
try_futile = !may_grant(gl, gh);
if (test_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags))
goto fail;
}
list_for_each_entry(gh2, &gl->gl_holders, gh_list) {
if (unlikely(gh2->gh_owner_pid == gh->gh_owner_pid &&
(gh->gh_gl->gl_ops->go_type != LM_TYPE_FLOCK)))
goto trap_recursive;
if (try_futile &&
!(gh2->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB))) {
fail:
gh->gh_error = GLR_TRYFAILED;
gfs2_holder_wake(gh);
return;
}
if (test_bit(HIF_HOLDER, &gh2->gh_iflags))
continue;
if (unlikely((gh->gh_flags & LM_FLAG_PRIORITY) && !insert_pt))
insert_pt = &gh2->gh_list;
}
set_bit(GLF_QUEUED, &gl->gl_flags);
trace_gfs2_glock_queue(gh, 1);
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
gfs2_glstats_inc(gl, GFS2_LKS_QCOUNT);
gfs2_sbstats_inc(gl, GFS2_LKS_QCOUNT);
if (likely(insert_pt == NULL)) {
list_add_tail(&gh->gh_list, &gl->gl_holders);
if (unlikely(gh->gh_flags & LM_FLAG_PRIORITY))
goto do_cancel;
return;
}
list_add_tail(&gh->gh_list, insert_pt);
do_cancel:
gh = list_entry(gl->gl_holders.next, struct gfs2_holder, gh_list);
if (!(gh->gh_flags & LM_FLAG_PRIORITY)) {
spin_unlock(&gl->gl_spin);
if (sdp->sd_lockstruct.ls_ops->lm_cancel)
sdp->sd_lockstruct.ls_ops->lm_cancel(gl);
spin_lock(&gl->gl_spin);
}
return;
trap_recursive:
print_symbol(KERN_ERR "original: %s\n", gh2->gh_ip);
printk(KERN_ERR "pid: %d\n", pid_nr(gh2->gh_owner_pid));
printk(KERN_ERR "lock type: %d req lock state : %d\n",
gh2->gh_gl->gl_name.ln_type, gh2->gh_state);
print_symbol(KERN_ERR "new: %s\n", gh->gh_ip);
printk(KERN_ERR "pid: %d\n", pid_nr(gh->gh_owner_pid));
printk(KERN_ERR "lock type: %d req lock state : %d\n",
gh->gh_gl->gl_name.ln_type, gh->gh_state);
gfs2_dump_glock(NULL, gl);
BUG();
}
/**
* gfs2_glock_nq - enqueue a struct gfs2_holder onto a glock (acquire a glock)
* @gh: the holder structure
*
* if (gh->gh_flags & GL_ASYNC), this never returns an error
*
* Returns: 0, GLR_TRYFAILED, or errno on failure
*/
int gfs2_glock_nq(struct gfs2_holder *gh)
{
struct gfs2_glock *gl = gh->gh_gl;
struct gfs2_sbd *sdp = gl->gl_sbd;
int error = 0;
if (unlikely(test_bit(SDF_SHUTDOWN, &sdp->sd_flags)))
return -EIO;
if (test_bit(GLF_LRU, &gl->gl_flags))
gfs2_glock_remove_from_lru(gl);
spin_lock(&gl->gl_spin);
add_to_queue(gh);
if ((LM_FLAG_NOEXP & gh->gh_flags) &&
test_and_clear_bit(GLF_FROZEN, &gl->gl_flags))
set_bit(GLF_REPLY_PENDING, &gl->gl_flags);
run_queue(gl, 1);
spin_unlock(&gl->gl_spin);
if (!(gh->gh_flags & GL_ASYNC))
error = gfs2_glock_wait(gh);
return error;
}
/**
* gfs2_glock_poll - poll to see if an async request has been completed
* @gh: the holder
*
* Returns: 1 if the request is ready to be gfs2_glock_wait()ed on
*/
int gfs2_glock_poll(struct gfs2_holder *gh)
{
return test_bit(HIF_WAIT, &gh->gh_iflags) ? 0 : 1;
}
/**
* gfs2_glock_dq - dequeue a struct gfs2_holder from a glock (release a glock)
* @gh: the glock holder
*
*/
void gfs2_glock_dq(struct gfs2_holder *gh)
{
struct gfs2_glock *gl = gh->gh_gl;
const struct gfs2_glock_operations *glops = gl->gl_ops;
unsigned delay = 0;
int fast_path = 0;
spin_lock(&gl->gl_spin);
if (gh->gh_flags & GL_NOCACHE)
handle_callback(gl, LM_ST_UNLOCKED, 0);
list_del_init(&gh->gh_list);
if (find_first_holder(gl) == NULL) {
if (glops->go_unlock) {
GLOCK_BUG_ON(gl, test_and_set_bit(GLF_LOCK, &gl->gl_flags));
spin_unlock(&gl->gl_spin);
glops->go_unlock(gh);
spin_lock(&gl->gl_spin);
clear_bit(GLF_LOCK, &gl->gl_flags);
}
if (list_empty(&gl->gl_holders) &&
!test_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
!test_bit(GLF_DEMOTE, &gl->gl_flags))
fast_path = 1;
}
if (!test_bit(GLF_LFLUSH, &gl->gl_flags) && demote_ok(gl))
gfs2_glock_add_to_lru(gl);
trace_gfs2_glock_queue(gh, 0);
spin_unlock(&gl->gl_spin);
if (likely(fast_path))
return;
gfs2_glock_hold(gl);
if (test_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
!test_bit(GLF_DEMOTE, &gl->gl_flags) &&
gl->gl_name.ln_type == LM_TYPE_INODE)
delay = gl->gl_hold_time;
if (queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0)
gfs2_glock_put(gl);
}
void gfs2_glock_dq_wait(struct gfs2_holder *gh)
{
struct gfs2_glock *gl = gh->gh_gl;
gfs2_glock_dq(gh);
might_sleep();
wait_on_bit(&gl->gl_flags, GLF_DEMOTE, gfs2_glock_demote_wait, TASK_UNINTERRUPTIBLE);
}
/**
* gfs2_glock_dq_uninit - dequeue a holder from a glock and initialize it
* @gh: the holder structure
*
*/
void gfs2_glock_dq_uninit(struct gfs2_holder *gh)
{
gfs2_glock_dq(gh);
gfs2_holder_uninit(gh);
}
/**
* gfs2_glock_nq_num - acquire a glock based on lock number
* @sdp: the filesystem
* @number: the lock number
* @glops: the glock operations for the type of glock
* @state: the state to acquire the glock in
* @flags: modifier flags for the acquisition
* @gh: the struct gfs2_holder
*
* Returns: errno
*/
int gfs2_glock_nq_num(struct gfs2_sbd *sdp, u64 number,
const struct gfs2_glock_operations *glops,
unsigned int state, int flags, struct gfs2_holder *gh)
{
struct gfs2_glock *gl;
int error;
error = gfs2_glock_get(sdp, number, glops, CREATE, &gl);
if (!error) {
error = gfs2_glock_nq_init(gl, state, flags, gh);
gfs2_glock_put(gl);
}
return error;
}
/**
* glock_compare - Compare two struct gfs2_glock structures for sorting
* @arg_a: the first structure
* @arg_b: the second structure
*
*/
static int glock_compare(const void *arg_a, const void *arg_b)
{
const struct gfs2_holder *gh_a = *(const struct gfs2_holder **)arg_a;
const struct gfs2_holder *gh_b = *(const struct gfs2_holder **)arg_b;
const struct lm_lockname *a = &gh_a->gh_gl->gl_name;
const struct lm_lockname *b = &gh_b->gh_gl->gl_name;
if (a->ln_number > b->ln_number)
return 1;
if (a->ln_number < b->ln_number)
return -1;
BUG_ON(gh_a->gh_gl->gl_ops->go_type == gh_b->gh_gl->gl_ops->go_type);
return 0;
}
/**
* nq_m_sync - synchonously acquire more than one glock in deadlock free order
* @num_gh: the number of structures
* @ghs: an array of struct gfs2_holder structures
*
* Returns: 0 on success (all glocks acquired),
* errno on failure (no glocks acquired)
*/
static int nq_m_sync(unsigned int num_gh, struct gfs2_holder *ghs,
struct gfs2_holder **p)
{
unsigned int x;
int error = 0;
for (x = 0; x < num_gh; x++)
p[x] = &ghs[x];
sort(p, num_gh, sizeof(struct gfs2_holder *), glock_compare, NULL);
for (x = 0; x < num_gh; x++) {
p[x]->gh_flags &= ~(LM_FLAG_TRY | GL_ASYNC);
error = gfs2_glock_nq(p[x]);
if (error) {
while (x--)
gfs2_glock_dq(p[x]);
break;
}
}
return error;
}
/**
* gfs2_glock_nq_m - acquire multiple glocks
* @num_gh: the number of structures
* @ghs: an array of struct gfs2_holder structures
*
*
* Returns: 0 on success (all glocks acquired),
* errno on failure (no glocks acquired)
*/
int gfs2_glock_nq_m(unsigned int num_gh, struct gfs2_holder *ghs)
{
struct gfs2_holder *tmp[4];
struct gfs2_holder **pph = tmp;
int error = 0;
switch(num_gh) {
case 0:
return 0;
case 1:
ghs->gh_flags &= ~(LM_FLAG_TRY | GL_ASYNC);
return gfs2_glock_nq(ghs);
default:
if (num_gh <= 4)
break;
pph = kmalloc(num_gh * sizeof(struct gfs2_holder *), GFP_NOFS);
if (!pph)
return -ENOMEM;
}
error = nq_m_sync(num_gh, ghs, pph);
if (pph != tmp)
kfree(pph);
return error;
}
/**
* gfs2_glock_dq_m - release multiple glocks
* @num_gh: the number of structures
* @ghs: an array of struct gfs2_holder structures
*
*/
void gfs2_glock_dq_m(unsigned int num_gh, struct gfs2_holder *ghs)
{
while (num_gh--)
gfs2_glock_dq(&ghs[num_gh]);
}
/**
* gfs2_glock_dq_uninit_m - release multiple glocks
* @num_gh: the number of structures
* @ghs: an array of struct gfs2_holder structures
*
*/
void gfs2_glock_dq_uninit_m(unsigned int num_gh, struct gfs2_holder *ghs)
{
while (num_gh--)
gfs2_glock_dq_uninit(&ghs[num_gh]);
}
void gfs2_glock_cb(struct gfs2_glock *gl, unsigned int state)
{
unsigned long delay = 0;
unsigned long holdtime;
unsigned long now = jiffies;
gfs2_glock_hold(gl);
holdtime = gl->gl_tchange + gl->gl_hold_time;
if (test_bit(GLF_QUEUED, &gl->gl_flags) &&
gl->gl_name.ln_type == LM_TYPE_INODE) {
if (time_before(now, holdtime))
delay = holdtime - now;
if (test_bit(GLF_REPLY_PENDING, &gl->gl_flags))
delay = gl->gl_hold_time;
}
spin_lock(&gl->gl_spin);
handle_callback(gl, state, delay);
spin_unlock(&gl->gl_spin);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0)
gfs2_glock_put(gl);
}
/**
* gfs2_should_freeze - Figure out if glock should be frozen
* @gl: The glock in question
*
* Glocks are not frozen if (a) the result of the dlm operation is
* an error, (b) the locking operation was an unlock operation or
* (c) if there is a "noexp" flagged request anywhere in the queue
*
* Returns: 1 if freezing should occur, 0 otherwise
*/
static int gfs2_should_freeze(const struct gfs2_glock *gl)
{
const struct gfs2_holder *gh;
if (gl->gl_reply & ~LM_OUT_ST_MASK)
return 0;
if (gl->gl_target == LM_ST_UNLOCKED)
return 0;
list_for_each_entry(gh, &gl->gl_holders, gh_list) {
if (test_bit(HIF_HOLDER, &gh->gh_iflags))
continue;
if (LM_FLAG_NOEXP & gh->gh_flags)
return 0;
}
return 1;
}
/**
* gfs2_glock_complete - Callback used by locking
* @gl: Pointer to the glock
* @ret: The return value from the dlm
*
* The gl_reply field is under the gl_spin lock so that it is ok
* to use a bitfield shared with other glock state fields.
*/
void gfs2_glock_complete(struct gfs2_glock *gl, int ret)
{
struct lm_lockstruct *ls = &gl->gl_sbd->sd_lockstruct;
spin_lock(&gl->gl_spin);
gl->gl_reply = ret;
if (unlikely(test_bit(DFL_BLOCK_LOCKS, &ls->ls_recover_flags))) {
if (gfs2_should_freeze(gl)) {
set_bit(GLF_FROZEN, &gl->gl_flags);
spin_unlock(&gl->gl_spin);
return;
}
}
spin_unlock(&gl->gl_spin);
set_bit(GLF_REPLY_PENDING, &gl->gl_flags);
smp_wmb();
gfs2_glock_hold(gl);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gfs2_glock_put(gl);
}
static int gfs2_shrink_glock_memory(struct shrinker *shrink,
struct shrink_control *sc)
{
struct gfs2_glock *gl;
int may_demote;
int nr_skipped = 0;
int nr = sc->nr_to_scan;
gfp_t gfp_mask = sc->gfp_mask;
LIST_HEAD(skipped);
if (nr == 0)
goto out;
if (!(gfp_mask & __GFP_FS))
return -1;
spin_lock(&lru_lock);
while(nr && !list_empty(&lru_list)) {
gl = list_entry(lru_list.next, struct gfs2_glock, gl_lru);
list_del_init(&gl->gl_lru);
clear_bit(GLF_LRU, &gl->gl_flags);
atomic_dec(&lru_count);
/* Test for being demotable */
if (!test_and_set_bit(GLF_LOCK, &gl->gl_flags)) {
gfs2_glock_hold(gl);
spin_unlock(&lru_lock);
spin_lock(&gl->gl_spin);
may_demote = demote_ok(gl);
if (may_demote) {
handle_callback(gl, LM_ST_UNLOCKED, 0);
nr--;
}
clear_bit(GLF_LOCK, &gl->gl_flags);
smp_mb__after_clear_bit();
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gfs2_glock_put_nolock(gl);
spin_unlock(&gl->gl_spin);
spin_lock(&lru_lock);
continue;
}
nr_skipped++;
list_add(&gl->gl_lru, &skipped);
set_bit(GLF_LRU, &gl->gl_flags);
}
list_splice(&skipped, &lru_list);
atomic_add(nr_skipped, &lru_count);
spin_unlock(&lru_lock);
out:
return (atomic_read(&lru_count) / 100) * sysctl_vfs_cache_pressure;
}
static struct shrinker glock_shrinker = {
.shrink = gfs2_shrink_glock_memory,
.seeks = DEFAULT_SEEKS,
};
/**
* examine_bucket - Call a function for glock in a hash bucket
* @examiner: the function
* @sdp: the filesystem
* @bucket: the bucket
*
*/
static void examine_bucket(glock_examiner examiner, const struct gfs2_sbd *sdp,
unsigned int hash)
{
struct gfs2_glock *gl;
struct hlist_bl_head *head = &gl_hash_table[hash];
struct hlist_bl_node *pos;
rcu_read_lock();
hlist_bl_for_each_entry_rcu(gl, pos, head, gl_list) {
if ((gl->gl_sbd == sdp) && atomic_read(&gl->gl_ref))
examiner(gl);
}
rcu_read_unlock();
cond_resched();
}
static void glock_hash_walk(glock_examiner examiner, const struct gfs2_sbd *sdp)
{
unsigned x;
for (x = 0; x < GFS2_GL_HASH_SIZE; x++)
examine_bucket(examiner, sdp, x);
}
/**
* thaw_glock - thaw out a glock which has an unprocessed reply waiting
* @gl: The glock to thaw
*
* N.B. When we freeze a glock, we leave a ref to the glock outstanding,
* so this has to result in the ref count being dropped by one.
*/
static void thaw_glock(struct gfs2_glock *gl)
{
if (!test_and_clear_bit(GLF_FROZEN, &gl->gl_flags))
return;
set_bit(GLF_REPLY_PENDING, &gl->gl_flags);
gfs2_glock_hold(gl);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gfs2_glock_put(gl);
}
/**
* clear_glock - look at a glock and see if we can free it from glock cache
* @gl: the glock to look at
*
*/
static void clear_glock(struct gfs2_glock *gl)
{
gfs2_glock_remove_from_lru(gl);
spin_lock(&gl->gl_spin);
if (gl->gl_state != LM_ST_UNLOCKED)
handle_callback(gl, LM_ST_UNLOCKED, 0);
spin_unlock(&gl->gl_spin);
gfs2_glock_hold(gl);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gfs2_glock_put(gl);
}
/**
* gfs2_glock_thaw - Thaw any frozen glocks
* @sdp: The super block
*
*/
void gfs2_glock_thaw(struct gfs2_sbd *sdp)
{
glock_hash_walk(thaw_glock, sdp);
}
static int dump_glock(struct seq_file *seq, struct gfs2_glock *gl)
{
int ret;
spin_lock(&gl->gl_spin);
ret = gfs2_dump_glock(seq, gl);
spin_unlock(&gl->gl_spin);
return ret;
}
static void dump_glock_func(struct gfs2_glock *gl)
{
dump_glock(NULL, gl);
}
/**
* gfs2_gl_hash_clear - Empty out the glock hash table
* @sdp: the filesystem
* @wait: wait until it's all gone
*
* Called when unmounting the filesystem.
*/
void gfs2_gl_hash_clear(struct gfs2_sbd *sdp)
{
set_bit(SDF_SKIP_DLM_UNLOCK, &sdp->sd_flags);
glock_hash_walk(clear_glock, sdp);
flush_workqueue(glock_workqueue);
wait_event(sdp->sd_glock_wait, atomic_read(&sdp->sd_glock_disposal) == 0);
glock_hash_walk(dump_glock_func, sdp);
}
void gfs2_glock_finish_truncate(struct gfs2_inode *ip)
{
struct gfs2_glock *gl = ip->i_gl;
int ret;
ret = gfs2_truncatei_resume(ip);
gfs2_assert_withdraw(gl->gl_sbd, ret == 0);
spin_lock(&gl->gl_spin);
clear_bit(GLF_LOCK, &gl->gl_flags);
run_queue(gl, 1);
spin_unlock(&gl->gl_spin);
}
static const char *state2str(unsigned state)
{
switch(state) {
case LM_ST_UNLOCKED:
return "UN";
case LM_ST_SHARED:
return "SH";
case LM_ST_DEFERRED:
return "DF";
case LM_ST_EXCLUSIVE:
return "EX";
}
return "??";
}
static const char *hflags2str(char *buf, unsigned flags, unsigned long iflags)
{
char *p = buf;
if (flags & LM_FLAG_TRY)
*p++ = 't';
if (flags & LM_FLAG_TRY_1CB)
*p++ = 'T';
if (flags & LM_FLAG_NOEXP)
*p++ = 'e';
if (flags & LM_FLAG_ANY)
*p++ = 'A';
if (flags & LM_FLAG_PRIORITY)
*p++ = 'p';
if (flags & GL_ASYNC)
*p++ = 'a';
if (flags & GL_EXACT)
*p++ = 'E';
if (flags & GL_NOCACHE)
*p++ = 'c';
if (test_bit(HIF_HOLDER, &iflags))
*p++ = 'H';
if (test_bit(HIF_WAIT, &iflags))
*p++ = 'W';
if (test_bit(HIF_FIRST, &iflags))
*p++ = 'F';
*p = 0;
return buf;
}
/**
* dump_holder - print information about a glock holder
* @seq: the seq_file struct
* @gh: the glock holder
*
* Returns: 0 on success, -ENOBUFS when we run out of space
*/
static int dump_holder(struct seq_file *seq, const struct gfs2_holder *gh)
{
struct task_struct *gh_owner = NULL;
char flags_buf[32];
if (gh->gh_owner_pid)
gh_owner = pid_task(gh->gh_owner_pid, PIDTYPE_PID);
gfs2_print_dbg(seq, " H: s:%s f:%s e:%d p:%ld [%s] %pS\n",
state2str(gh->gh_state),
hflags2str(flags_buf, gh->gh_flags, gh->gh_iflags),
gh->gh_error,
gh->gh_owner_pid ? (long)pid_nr(gh->gh_owner_pid) : -1,
gh_owner ? gh_owner->comm : "(ended)",
(void *)gh->gh_ip);
return 0;
}
static const char *gflags2str(char *buf, const struct gfs2_glock *gl)
{
const unsigned long *gflags = &gl->gl_flags;
char *p = buf;
if (test_bit(GLF_LOCK, gflags))
*p++ = 'l';
if (test_bit(GLF_DEMOTE, gflags))
*p++ = 'D';
if (test_bit(GLF_PENDING_DEMOTE, gflags))
*p++ = 'd';
if (test_bit(GLF_DEMOTE_IN_PROGRESS, gflags))
*p++ = 'p';
if (test_bit(GLF_DIRTY, gflags))
*p++ = 'y';
if (test_bit(GLF_LFLUSH, gflags))
*p++ = 'f';
if (test_bit(GLF_INVALIDATE_IN_PROGRESS, gflags))
*p++ = 'i';
if (test_bit(GLF_REPLY_PENDING, gflags))
*p++ = 'r';
if (test_bit(GLF_INITIAL, gflags))
*p++ = 'I';
if (test_bit(GLF_FROZEN, gflags))
*p++ = 'F';
if (test_bit(GLF_QUEUED, gflags))
*p++ = 'q';
if (test_bit(GLF_LRU, gflags))
*p++ = 'L';
if (gl->gl_object)
*p++ = 'o';
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
if (test_bit(GLF_BLOCKING, gflags))
*p++ = 'b';
*p = 0;
return buf;
}
/**
* gfs2_dump_glock - print information about a glock
* @seq: The seq_file struct
* @gl: the glock
*
* The file format is as follows:
* One line per object, capital letters are used to indicate objects
* G = glock, I = Inode, R = rgrp, H = holder. Glocks are not indented,
* other objects are indented by a single space and follow the glock to
* which they are related. Fields are indicated by lower case letters
* followed by a colon and the field value, except for strings which are in
* [] so that its possible to see if they are composed of spaces for
* example. The field's are n = number (id of the object), f = flags,
* t = type, s = state, r = refcount, e = error, p = pid.
*
* Returns: 0 on success, -ENOBUFS when we run out of space
*/
int gfs2_dump_glock(struct seq_file *seq, const struct gfs2_glock *gl)
{
const struct gfs2_glock_operations *glops = gl->gl_ops;
unsigned long long dtime;
const struct gfs2_holder *gh;
char gflags_buf[32];
int error = 0;
dtime = jiffies - gl->gl_demote_time;
dtime *= 1000000/HZ; /* demote time in uSec */
if (!test_bit(GLF_DEMOTE, &gl->gl_flags))
dtime = 0;
gfs2_print_dbg(seq, "G: s:%s n:%u/%llx f:%s t:%s d:%s/%llu a:%d v:%d r:%d m:%ld\n",
state2str(gl->gl_state),
gl->gl_name.ln_type,
(unsigned long long)gl->gl_name.ln_number,
gflags2str(gflags_buf, gl),
state2str(gl->gl_target),
state2str(gl->gl_demote_state), dtime,
atomic_read(&gl->gl_ail_count),
atomic_read(&gl->gl_revokes),
atomic_read(&gl->gl_ref), gl->gl_hold_time);
list_for_each_entry(gh, &gl->gl_holders, gh_list) {
error = dump_holder(seq, gh);
if (error)
goto out;
}
if (gl->gl_state != LM_ST_UNLOCKED && glops->go_dump)
error = glops->go_dump(seq, gl);
out:
return error;
}
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
static int gfs2_glstats_seq_show(struct seq_file *seq, void *iter_ptr)
{
struct gfs2_glock *gl = iter_ptr;
seq_printf(seq, "G: n:%u/%llx rtt:%lld/%lld rttb:%lld/%lld irt:%lld/%lld dcnt: %lld qcnt: %lld\n",
gl->gl_name.ln_type,
(unsigned long long)gl->gl_name.ln_number,
(long long)gl->gl_stats.stats[GFS2_LKS_SRTT],
(long long)gl->gl_stats.stats[GFS2_LKS_SRTTVAR],
(long long)gl->gl_stats.stats[GFS2_LKS_SRTTB],
(long long)gl->gl_stats.stats[GFS2_LKS_SRTTVARB],
(long long)gl->gl_stats.stats[GFS2_LKS_SIRT],
(long long)gl->gl_stats.stats[GFS2_LKS_SIRTVAR],
(long long)gl->gl_stats.stats[GFS2_LKS_DCOUNT],
(long long)gl->gl_stats.stats[GFS2_LKS_QCOUNT]);
return 0;
}
static const char *gfs2_gltype[] = {
"type",
"reserved",
"nondisk",
"inode",
"rgrp",
"meta",
"iopen",
"flock",
"plock",
"quota",
"journal",
};
static const char *gfs2_stype[] = {
[GFS2_LKS_SRTT] = "srtt",
[GFS2_LKS_SRTTVAR] = "srttvar",
[GFS2_LKS_SRTTB] = "srttb",
[GFS2_LKS_SRTTVARB] = "srttvarb",
[GFS2_LKS_SIRT] = "sirt",
[GFS2_LKS_SIRTVAR] = "sirtvar",
[GFS2_LKS_DCOUNT] = "dlm",
[GFS2_LKS_QCOUNT] = "queue",
};
#define GFS2_NR_SBSTATS (ARRAY_SIZE(gfs2_gltype) * ARRAY_SIZE(gfs2_stype))
static int gfs2_sbstats_seq_show(struct seq_file *seq, void *iter_ptr)
{
struct gfs2_glock_iter *gi = seq->private;
struct gfs2_sbd *sdp = gi->sdp;
unsigned index = gi->hash >> 3;
unsigned subindex = gi->hash & 0x07;
s64 value;
int i;
if (index == 0 && subindex != 0)
return 0;
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
seq_printf(seq, "%-10s %8s:", gfs2_gltype[index],
(index == 0) ? "cpu": gfs2_stype[subindex]);
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
for_each_possible_cpu(i) {
const struct gfs2_pcpu_lkstats *lkstats = per_cpu_ptr(sdp->sd_lkstats, i);
if (index == 0) {
value = i;
} else {
value = lkstats->lkstats[index - 1].stats[subindex];
}
seq_printf(seq, " %15lld", (long long)value);
}
seq_putc(seq, '\n');
return 0;
}
int __init gfs2_glock_init(void)
{
unsigned i;
for(i = 0; i < GFS2_GL_HASH_SIZE; i++) {
INIT_HLIST_BL_HEAD(&gl_hash_table[i]);
}
glock_workqueue = alloc_workqueue("glock_workqueue", WQ_MEM_RECLAIM |
WQ_HIGHPRI | WQ_FREEZABLE, 0);
if (IS_ERR(glock_workqueue))
return PTR_ERR(glock_workqueue);
gfs2_delete_workqueue = alloc_workqueue("delete_workqueue",
WQ_MEM_RECLAIM | WQ_FREEZABLE,
0);
if (IS_ERR(gfs2_delete_workqueue)) {
destroy_workqueue(glock_workqueue);
return PTR_ERR(gfs2_delete_workqueue);
}
register_shrinker(&glock_shrinker);
return 0;
}
void gfs2_glock_exit(void)
{
unregister_shrinker(&glock_shrinker);
destroy_workqueue(glock_workqueue);
destroy_workqueue(gfs2_delete_workqueue);
}
static inline struct gfs2_glock *glock_hash_chain(unsigned hash)
{
return hlist_bl_entry(hlist_bl_first_rcu(&gl_hash_table[hash]),
struct gfs2_glock, gl_list);
}
static inline struct gfs2_glock *glock_hash_next(struct gfs2_glock *gl)
{
return hlist_bl_entry(rcu_dereference(gl->gl_list.next),
struct gfs2_glock, gl_list);
}
static int gfs2_glock_iter_next(struct gfs2_glock_iter *gi)
{
struct gfs2_glock *gl;
do {
gl = gi->gl;
if (gl) {
gi->gl = glock_hash_next(gl);
gi->nhash++;
} else {
if (gi->hash >= GFS2_GL_HASH_SIZE) {
rcu_read_unlock();
return 1;
}
gi->gl = glock_hash_chain(gi->hash);
gi->nhash = 0;
}
while (gi->gl == NULL) {
gi->hash++;
if (gi->hash >= GFS2_GL_HASH_SIZE) {
rcu_read_unlock();
return 1;
}
gi->gl = glock_hash_chain(gi->hash);
gi->nhash = 0;
}
/* Skip entries for other sb and dead entries */
} while (gi->sdp != gi->gl->gl_sbd || atomic_read(&gi->gl->gl_ref) == 0);
return 0;
}
static void *gfs2_glock_seq_start(struct seq_file *seq, loff_t *pos)
{
struct gfs2_glock_iter *gi = seq->private;
loff_t n = *pos;
if (gi->last_pos <= *pos)
n = gi->nhash + (*pos - gi->last_pos);
else
gi->hash = 0;
gi->nhash = 0;
rcu_read_lock();
do {
if (gfs2_glock_iter_next(gi))
return NULL;
} while (n--);
gi->last_pos = *pos;
return gi->gl;
}
static void *gfs2_glock_seq_next(struct seq_file *seq, void *iter_ptr,
loff_t *pos)
{
struct gfs2_glock_iter *gi = seq->private;
(*pos)++;
gi->last_pos = *pos;
if (gfs2_glock_iter_next(gi))
return NULL;
return gi->gl;
}
static void gfs2_glock_seq_stop(struct seq_file *seq, void *iter_ptr)
{
struct gfs2_glock_iter *gi = seq->private;
if (gi->gl)
rcu_read_unlock();
gi->gl = NULL;
}
static int gfs2_glock_seq_show(struct seq_file *seq, void *iter_ptr)
{
return dump_glock(seq, iter_ptr);
}
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
static void *gfs2_sbstats_seq_start(struct seq_file *seq, loff_t *pos)
{
struct gfs2_glock_iter *gi = seq->private;
gi->hash = *pos;
if (*pos >= GFS2_NR_SBSTATS)
return NULL;
preempt_disable();
return SEQ_START_TOKEN;
}
static void *gfs2_sbstats_seq_next(struct seq_file *seq, void *iter_ptr,
loff_t *pos)
{
struct gfs2_glock_iter *gi = seq->private;
(*pos)++;
gi->hash++;
if (gi->hash >= GFS2_NR_SBSTATS) {
preempt_enable();
return NULL;
}
return SEQ_START_TOKEN;
}
static void gfs2_sbstats_seq_stop(struct seq_file *seq, void *iter_ptr)
{
preempt_enable();
}
static const struct seq_operations gfs2_glock_seq_ops = {
.start = gfs2_glock_seq_start,
.next = gfs2_glock_seq_next,
.stop = gfs2_glock_seq_stop,
.show = gfs2_glock_seq_show,
};
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
static const struct seq_operations gfs2_glstats_seq_ops = {
.start = gfs2_glock_seq_start,
.next = gfs2_glock_seq_next,
.stop = gfs2_glock_seq_stop,
.show = gfs2_glstats_seq_show,
};
static const struct seq_operations gfs2_sbstats_seq_ops = {
.start = gfs2_sbstats_seq_start,
.next = gfs2_sbstats_seq_next,
.stop = gfs2_sbstats_seq_stop,
.show = gfs2_sbstats_seq_show,
};
#define GFS2_SEQ_GOODSIZE min(PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER, 65536UL)
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
static int gfs2_glocks_open(struct inode *inode, struct file *file)
{
int ret = seq_open_private(file, &gfs2_glock_seq_ops,
sizeof(struct gfs2_glock_iter));
if (ret == 0) {
struct seq_file *seq = file->private_data;
struct gfs2_glock_iter *gi = seq->private;
gi->sdp = inode->i_private;
seq->buf = kmalloc(GFS2_SEQ_GOODSIZE, GFP_KERNEL | __GFP_NOWARN);
if (seq->buf)
seq->size = GFS2_SEQ_GOODSIZE;
}
return ret;
}
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
static int gfs2_glstats_open(struct inode *inode, struct file *file)
{
int ret = seq_open_private(file, &gfs2_glstats_seq_ops,
sizeof(struct gfs2_glock_iter));
if (ret == 0) {
struct seq_file *seq = file->private_data;
struct gfs2_glock_iter *gi = seq->private;
gi->sdp = inode->i_private;
seq->buf = kmalloc(GFS2_SEQ_GOODSIZE, GFP_KERNEL | __GFP_NOWARN);
if (seq->buf)
seq->size = GFS2_SEQ_GOODSIZE;
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
}
return ret;
}
static int gfs2_sbstats_open(struct inode *inode, struct file *file)
{
int ret = seq_open_private(file, &gfs2_sbstats_seq_ops,
sizeof(struct gfs2_glock_iter));
if (ret == 0) {
struct seq_file *seq = file->private_data;
struct gfs2_glock_iter *gi = seq->private;
gi->sdp = inode->i_private;
}
return ret;
}
static const struct file_operations gfs2_glocks_fops = {
.owner = THIS_MODULE,
.open = gfs2_glocks_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release_private,
};
static const struct file_operations gfs2_glstats_fops = {
.owner = THIS_MODULE,
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
.open = gfs2_glstats_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release_private,
};
static const struct file_operations gfs2_sbstats_fops = {
.owner = THIS_MODULE,
.open = gfs2_sbstats_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release_private,
};
int gfs2_create_debugfs_file(struct gfs2_sbd *sdp)
{
sdp->debugfs_dir = debugfs_create_dir(sdp->sd_table_name, gfs2_root);
if (!sdp->debugfs_dir)
return -ENOMEM;
sdp->debugfs_dentry_glocks = debugfs_create_file("glocks",
S_IFREG | S_IRUGO,
sdp->debugfs_dir, sdp,
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
&gfs2_glocks_fops);
if (!sdp->debugfs_dentry_glocks)
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
goto fail;
sdp->debugfs_dentry_glstats = debugfs_create_file("glstats",
S_IFREG | S_IRUGO,
sdp->debugfs_dir, sdp,
&gfs2_glstats_fops);
if (!sdp->debugfs_dentry_glstats)
goto fail;
sdp->debugfs_dentry_sbstats = debugfs_create_file("sbstats",
S_IFREG | S_IRUGO,
sdp->debugfs_dir, sdp,
&gfs2_sbstats_fops);
if (!sdp->debugfs_dentry_sbstats)
goto fail;
return 0;
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
fail:
gfs2_delete_debugfs_file(sdp);
return -ENOMEM;
}
void gfs2_delete_debugfs_file(struct gfs2_sbd *sdp)
{
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
if (sdp->debugfs_dir) {
if (sdp->debugfs_dentry_glocks) {
debugfs_remove(sdp->debugfs_dentry_glocks);
sdp->debugfs_dentry_glocks = NULL;
}
GFS2: glock statistics gathering The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-20 18:38:36 +08:00
if (sdp->debugfs_dentry_glstats) {
debugfs_remove(sdp->debugfs_dentry_glstats);
sdp->debugfs_dentry_glstats = NULL;
}
if (sdp->debugfs_dentry_sbstats) {
debugfs_remove(sdp->debugfs_dentry_sbstats);
sdp->debugfs_dentry_sbstats = NULL;
}
debugfs_remove(sdp->debugfs_dir);
sdp->debugfs_dir = NULL;
}
}
int gfs2_register_debugfs(void)
{
gfs2_root = debugfs_create_dir("gfs2", NULL);
return gfs2_root ? 0 : -ENOMEM;
}
void gfs2_unregister_debugfs(void)
{
debugfs_remove(gfs2_root);
gfs2_root = NULL;
}