linux/arch/arm/boot/dts/spear13xx.dtsi

344 lines
7.3 KiB
Plaintext
Raw Normal View History

/*
* DTS file for all SPEAr13xx SoCs
*
* Copyright 2012 Viresh Kumar <vireshk@kernel.org>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
};
cpu@1 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
};
};
gic: interrupt-controller@ec801000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
#interrupt-cells = <3>;
reg = < 0xec801000 0x1000 >,
< 0xec800100 0x0100 >;
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 6 0x04
0 7 0x04>;
};
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0xed000000 0x1000>;
cache-unified;
cache-level = <2>;
};
memory {
name = "memory";
device_type = "memory";
reg = <0 0x40000000>;
};
chosen {
bootargs = "console=ttyAMA0,115200";
};
cpufreq {
compatible = "st,cpufreq-spear";
cpufreq_tbl = < 166000
200000
250000
300000
400000
500000
600000 >;
MTD pull for 3.8 - Various cleanups especially in NAND tests - Add support for NAND flash on BCMA bus - DT support for sh_flctl and denali NAND drivers - Kill obsolete/superceded drivers (fortunet, nomadik_nand) - Fix JFFS2 locking bug in ENOMEM failure path - New SPI flash chips, as usual - Support writing in 'reliable mode' for DiskOnChip G4 - Debugfs support in nandsim -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iEYEABECAAYFAlDSAa4ACgkQdwG7hYl686MMcACeNYa//ghPtccb5L+IRXsqaFDL Yi4AoLWOaOjN8qM4KUF/bfMEkwNGAePz =DaAQ -----END PGP SIGNATURE----- Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd Pull MTD updates from David Woodhouse: - Various cleanups especially in NAND tests - Add support for NAND flash on BCMA bus - DT support for sh_flctl and denali NAND drivers - Kill obsolete/superceded drivers (fortunet, nomadik_nand) - Fix JFFS2 locking bug in ENOMEM failure path - New SPI flash chips, as usual - Support writing in 'reliable mode' for DiskOnChip G4 - Debugfs support in nandsim * tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits) mtd: nand: typo in nand_id_has_period() comments mtd: nand/gpio: use io{read,write}*_rep accessors mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited. mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems mtd: nand/docg4: fix and improve read of factory bbt mtd: nand/docg4: reserve bb marker area in ecclayout mtd: nand/docg4: add support for writing in reliable mode mtd: mxc_nand: reorder part_probes to let cmdline override other sources mtd: mxc_nand: fix unbalanced clk_disable() in error path mtd: nandsim: Introduce debugfs infrastructure mtd: physmap_of: error checking to prevent a NULL pointer dereference mtg: docg3: potential divide by zero in doc_write_oob() mtd: bcm47xxnflash: writing support mtd: tests/read: initialize buffer for whole next page mtd: at91: atmel_nand: return bit flips for the PMECC read_page() mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c mtd: nand: onfi need to be probed in 8 bits mode mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width mtd: nand: print flash size during detection mted: nand_wait_ready timeout fix ...
2012-12-20 04:47:41 +08:00
status = "disabled";
};
ahb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x50000000 0x50000000 0x10000000
0x80000000 0x80000000 0x20000000
0xb0000000 0xb0000000 0x22000000
0xd8000000 0xd8000000 0x01000000
0xe0000000 0xe0000000 0x10000000>;
sdhci@b3000000 {
compatible = "st,sdhci-spear";
reg = <0xb3000000 0x100>;
interrupts = <0 28 0x4>;
status = "disabled";
};
cf@b2800000 {
compatible = "arasan,cf-spear1340";
reg = <0xb2800000 0x1000>;
interrupts = <0 29 0x4>;
status = "disabled";
dmas = <&dwdma0 0 0 0 0>;
dma-names = "data";
};
dwdma0: dma@ea800000 {
compatible = "snps,dma-spear1340";
reg = <0xea800000 0x1000>;
interrupts = <0 19 0x4>;
status = "disabled";
dma-channels = <8>;
#dma-cells = <3>;
dma-requests = <32>;
chan_allocation_order = <1>;
chan_priority = <1>;
block_size = <0xfff>;
dma-masters = <2>;
data_width = <3 3>;
};
dma@eb000000 {
compatible = "snps,dma-spear1340";
reg = <0xeb000000 0x1000>;
interrupts = <0 59 0x4>;
status = "disabled";
dma-requests = <32>;
dma-channels = <8>;
dma-masters = <2>;
#dma-cells = <3>;
chan_allocation_order = <1>;
chan_priority = <1>;
block_size = <0xfff>;
data_width = <3 3>;
};
fsmc: flash@b0000000 {
compatible = "st,spear600-fsmc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb0000000 0x1000 /* FSMC Register*/
0xb0800000 0x0010 /* NAND Base DATA */
0xb0820000 0x0010 /* NAND Base ADDR */
0xb0810000 0x0010>; /* NAND Base CMD */
reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
interrupts = <0 20 0x4
0 21 0x4
0 22 0x4
0 23 0x4>;
st,mode = <2>;
status = "disabled";
};
gmac0: eth@e2000000 {
compatible = "st,spear600-gmac";
reg = <0xe2000000 0x8000>;
interrupts = <0 33 0x4
0 34 0x4>;
interrupt-names = "macirq", "eth_wake_irq";
status = "disabled";
};
pcm {
compatible = "st,pcm-audio";
#address-cells = <0>;
#size-cells = <0>;
MTD pull for 3.8 - Various cleanups especially in NAND tests - Add support for NAND flash on BCMA bus - DT support for sh_flctl and denali NAND drivers - Kill obsolete/superceded drivers (fortunet, nomadik_nand) - Fix JFFS2 locking bug in ENOMEM failure path - New SPI flash chips, as usual - Support writing in 'reliable mode' for DiskOnChip G4 - Debugfs support in nandsim -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iEYEABECAAYFAlDSAa4ACgkQdwG7hYl686MMcACeNYa//ghPtccb5L+IRXsqaFDL Yi4AoLWOaOjN8qM4KUF/bfMEkwNGAePz =DaAQ -----END PGP SIGNATURE----- Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd Pull MTD updates from David Woodhouse: - Various cleanups especially in NAND tests - Add support for NAND flash on BCMA bus - DT support for sh_flctl and denali NAND drivers - Kill obsolete/superceded drivers (fortunet, nomadik_nand) - Fix JFFS2 locking bug in ENOMEM failure path - New SPI flash chips, as usual - Support writing in 'reliable mode' for DiskOnChip G4 - Debugfs support in nandsim * tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits) mtd: nand: typo in nand_id_has_period() comments mtd: nand/gpio: use io{read,write}*_rep accessors mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited. mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems mtd: nand/docg4: fix and improve read of factory bbt mtd: nand/docg4: reserve bb marker area in ecclayout mtd: nand/docg4: add support for writing in reliable mode mtd: mxc_nand: reorder part_probes to let cmdline override other sources mtd: mxc_nand: fix unbalanced clk_disable() in error path mtd: nandsim: Introduce debugfs infrastructure mtd: physmap_of: error checking to prevent a NULL pointer dereference mtg: docg3: potential divide by zero in doc_write_oob() mtd: bcm47xxnflash: writing support mtd: tests/read: initialize buffer for whole next page mtd: at91: atmel_nand: return bit flips for the PMECC read_page() mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c mtd: nand: onfi need to be probed in 8 bits mode mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width mtd: nand: print flash size during detection mted: nand_wait_ready timeout fix ...
2012-12-20 04:47:41 +08:00
status = "disabled";
};
smi: flash@ea000000 {
compatible = "st,spear600-smi";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xea000000 0x1000>;
interrupts = <0 30 0x4>;
status = "disabled";
};
ehci@e4800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe4800000 0x1000>;
interrupts = <0 64 0x4>;
usbh0_id = <0>;
status = "disabled";
};
ehci@e5800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe5800000 0x1000>;
interrupts = <0 66 0x4>;
usbh1_id = <1>;
status = "disabled";
};
ohci@e4000000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe4000000 0x1000>;
interrupts = <0 65 0x4>;
usbh0_id = <0>;
status = "disabled";
};
ohci@e5000000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe5000000 0x1000>;
interrupts = <0 67 0x4>;
usbh1_id = <1>;
status = "disabled";
};
apb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x50000000 0x50000000 0x10000000
0xb0000000 0xb0000000 0x10000000
0xd0000000 0xd0000000 0x02000000
0xd8000000 0xd8000000 0x01000000
0xe0000000 0xe0000000 0x10000000>;
misc: syscon@e0700000 {
compatible = "st,spear1340-misc", "syscon";
reg = <0xe0700000 0x1000>;
};
gpio0: gpio@e0600000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xe0600000 0x1000>;
interrupts = <0 24 0x4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio1: gpio@e0680000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xe0680000 0x1000>;
interrupts = <0 25 0x4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
kbd@e0300000 {
compatible = "st,spear300-kbd";
reg = <0xe0300000 0x1000>;
interrupts = <0 52 0x4>;
status = "disabled";
};
i2c0: i2c@e0280000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xe0280000 0x1000>;
interrupts = <0 41 0x4>;
status = "disabled";
};
i2s@e0180000 {
compatible = "st,designware-i2s";
reg = <0xe0180000 0x1000>;
interrupt-names = "play_irq", "record_irq";
interrupts = <0 10 0x4
0 11 0x4 >;
status = "disabled";
};
i2s@e0200000 {
compatible = "st,designware-i2s";
reg = <0xe0200000 0x1000>;
interrupt-names = "play_irq", "record_irq";
interrupts = <0 26 0x4
0 53 0x4>;
status = "disabled";
};
spi0: spi@e0100000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xe0100000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 31 0x4>;
status = "disabled";
dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */
<&dwdma0 0x0280 0 0 0>; /* 0x5 << 7 */
dma-names = "tx", "rx";
};
rtc@e0580000 {
compatible = "st,spear600-rtc";
reg = <0xe0580000 0x1000>;
interrupts = <0 36 0x4>;
status = "disabled";
};
serial@e0000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xe0000000 0x1000>;
interrupts = <0 35 0x4>;
status = "disabled";
};
adc@e0080000 {
compatible = "st,spear600-adc";
reg = <0xe0080000 0x1000>;
interrupts = <0 12 0x4>;
status = "disabled";
};
timer@e0380000 {
compatible = "st,spear-timer";
reg = <0xe0380000 0x400>;
interrupts = <0 37 0x4>;
};
timer@ec800600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xec800600 0x20>;
interrupts = <1 13 0x4>;
status = "disabled";
};
wdt@ec800620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0xec800620 0x20>;
status = "disabled";
};
thermal@e07008c4 {
compatible = "st,thermal-spear1340";
reg = <0xe07008c4 0x4>;
thermal_flags = <0x7000>;
};
};
};
};