linux/fs/xfs/xfs_super.c

2139 lines
53 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2000-2006 Silicon Graphics, Inc.
* All Rights Reserved.
*/
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
#include "xfs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_sb.h"
#include "xfs_mount.h"
#include "xfs_inode.h"
#include "xfs_btree.h"
#include "xfs_bmap.h"
#include "xfs_alloc.h"
#include "xfs_fsops.h"
#include "xfs_trans.h"
#include "xfs_buf_item.h"
#include "xfs_log.h"
#include "xfs_log_priv.h"
#include "xfs_dir2.h"
#include "xfs_extfree_item.h"
#include "xfs_mru_cache.h"
#include "xfs_inode_item.h"
#include "xfs_icache.h"
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
#include "xfs_trace.h"
#include "xfs_icreate_item.h"
#include "xfs_filestream.h"
#include "xfs_quota.h"
#include "xfs_sysfs.h"
#include "xfs_ondisk.h"
#include "xfs_rmap_item.h"
#include "xfs_refcount_item.h"
#include "xfs_bmap_item.h"
#include "xfs_reflink.h"
#include <linux/magic.h>
#include <linux/fs_context.h>
#include <linux/fs_parser.h>
static const struct super_operations xfs_super_operations;
static struct kset *xfs_kset; /* top-level xfs sysfs dir */
#ifdef DEBUG
static struct xfs_kobj xfs_dbg_kobj; /* global debug sysfs attrs */
#endif
/*
* Table driven mount option parser.
*/
enum {
Opt_logbufs, Opt_logbsize, Opt_logdev, Opt_rtdev,
Opt_wsync, Opt_noalign, Opt_swalloc, Opt_sunit, Opt_swidth, Opt_nouuid,
Opt_grpid, Opt_nogrpid, Opt_bsdgroups, Opt_sysvgroups,
Opt_allocsize, Opt_norecovery, Opt_inode64, Opt_inode32, Opt_ikeep,
Opt_noikeep, Opt_largeio, Opt_nolargeio, Opt_attr2, Opt_noattr2,
Opt_filestreams, Opt_quota, Opt_noquota, Opt_usrquota, Opt_grpquota,
Opt_prjquota, Opt_uquota, Opt_gquota, Opt_pquota,
Opt_uqnoenforce, Opt_gqnoenforce, Opt_pqnoenforce, Opt_qnoenforce,
Opt_discard, Opt_nodiscard, Opt_dax,
};
static const struct fs_parameter_spec xfs_param_specs[] = {
fsparam_u32("logbufs", Opt_logbufs),
fsparam_string("logbsize", Opt_logbsize),
fsparam_string("logdev", Opt_logdev),
fsparam_string("rtdev", Opt_rtdev),
fsparam_flag("wsync", Opt_wsync),
fsparam_flag("noalign", Opt_noalign),
fsparam_flag("swalloc", Opt_swalloc),
fsparam_u32("sunit", Opt_sunit),
fsparam_u32("swidth", Opt_swidth),
fsparam_flag("nouuid", Opt_nouuid),
fsparam_flag("grpid", Opt_grpid),
fsparam_flag("nogrpid", Opt_nogrpid),
fsparam_flag("bsdgroups", Opt_bsdgroups),
fsparam_flag("sysvgroups", Opt_sysvgroups),
fsparam_string("allocsize", Opt_allocsize),
fsparam_flag("norecovery", Opt_norecovery),
fsparam_flag("inode64", Opt_inode64),
fsparam_flag("inode32", Opt_inode32),
fsparam_flag("ikeep", Opt_ikeep),
fsparam_flag("noikeep", Opt_noikeep),
fsparam_flag("largeio", Opt_largeio),
fsparam_flag("nolargeio", Opt_nolargeio),
fsparam_flag("attr2", Opt_attr2),
fsparam_flag("noattr2", Opt_noattr2),
fsparam_flag("filestreams", Opt_filestreams),
fsparam_flag("quota", Opt_quota),
fsparam_flag("noquota", Opt_noquota),
fsparam_flag("usrquota", Opt_usrquota),
fsparam_flag("grpquota", Opt_grpquota),
fsparam_flag("prjquota", Opt_prjquota),
fsparam_flag("uquota", Opt_uquota),
fsparam_flag("gquota", Opt_gquota),
fsparam_flag("pquota", Opt_pquota),
fsparam_flag("uqnoenforce", Opt_uqnoenforce),
fsparam_flag("gqnoenforce", Opt_gqnoenforce),
fsparam_flag("pqnoenforce", Opt_pqnoenforce),
fsparam_flag("qnoenforce", Opt_qnoenforce),
fsparam_flag("discard", Opt_discard),
fsparam_flag("nodiscard", Opt_nodiscard),
fsparam_flag("dax", Opt_dax),
{}
};
static const struct fs_parameter_description xfs_fs_parameters = {
.name = "xfs",
.specs = xfs_param_specs,
};
struct proc_xfs_info {
uint64_t flag;
char *str;
};
static int
xfs_fs_show_options(
struct seq_file *m,
struct dentry *root)
{
static struct proc_xfs_info xfs_info_set[] = {
/* the few simple ones we can get from the mount struct */
{ XFS_MOUNT_IKEEP, ",ikeep" },
{ XFS_MOUNT_WSYNC, ",wsync" },
{ XFS_MOUNT_NOALIGN, ",noalign" },
{ XFS_MOUNT_SWALLOC, ",swalloc" },
{ XFS_MOUNT_NOUUID, ",nouuid" },
{ XFS_MOUNT_NORECOVERY, ",norecovery" },
{ XFS_MOUNT_ATTR2, ",attr2" },
{ XFS_MOUNT_FILESTREAMS, ",filestreams" },
{ XFS_MOUNT_GRPID, ",grpid" },
{ XFS_MOUNT_DISCARD, ",discard" },
{ XFS_MOUNT_LARGEIO, ",largeio" },
{ XFS_MOUNT_DAX, ",dax" },
{ 0, NULL }
};
struct xfs_mount *mp = XFS_M(root->d_sb);
struct proc_xfs_info *xfs_infop;
for (xfs_infop = xfs_info_set; xfs_infop->flag; xfs_infop++) {
if (mp->m_flags & xfs_infop->flag)
seq_puts(m, xfs_infop->str);
}
seq_printf(m, ",inode%d",
(mp->m_flags & XFS_MOUNT_SMALL_INUMS) ? 32 : 64);
if (mp->m_flags & XFS_MOUNT_ALLOCSIZE)
seq_printf(m, ",allocsize=%dk",
(1 << mp->m_allocsize_log) >> 10);
if (mp->m_logbufs > 0)
seq_printf(m, ",logbufs=%d", mp->m_logbufs);
if (mp->m_logbsize > 0)
seq_printf(m, ",logbsize=%dk", mp->m_logbsize >> 10);
if (mp->m_logname)
seq_show_option(m, "logdev", mp->m_logname);
if (mp->m_rtname)
seq_show_option(m, "rtdev", mp->m_rtname);
if (mp->m_dalign > 0)
seq_printf(m, ",sunit=%d",
(int)XFS_FSB_TO_BB(mp, mp->m_dalign));
if (mp->m_swidth > 0)
seq_printf(m, ",swidth=%d",
(int)XFS_FSB_TO_BB(mp, mp->m_swidth));
if (mp->m_qflags & (XFS_UQUOTA_ACCT|XFS_UQUOTA_ENFD))
seq_puts(m, ",usrquota");
else if (mp->m_qflags & XFS_UQUOTA_ACCT)
seq_puts(m, ",uqnoenforce");
xfs: xfs_showargs() reports group *and* project quotas enabled If you enable group or project quotas on an XFS file system, then the mount table presented through /proc/self/mounts erroneously shows that both options are in effect for the file system. The root of the problem is some bad logic in the xfs_showargs() function, which is used to format the file system type-specific options in effect for a file system. The problem originated in this GIT commit: Move platform specific mount option parse out of core XFS code Date: 11/22/07 Author: Dave Chinner SHA1 ID: a67d7c5f5d25d0b13a4dfb182697135b014fa478 For XFS quotas, project and group quota management are mutually exclusive--only one can be in effect at a time. There are two parts to managing quotas: aggregating usage information; and enforcing limits. It is possible to have a quota in effect (aggregating usage) but not enforced. These features are recorded on an XFS mount point using these flags: XFS_PQUOTA_ACCT - Project quotas are aggregated XFS_GQUOTA_ACCT - Group quotas are aggregated XFS_OQUOTA_ENFD - Project/group quotas are enforced The code in error is in fs/xfs/linux-2.6/xfs_super.c: if (mp->m_qflags & (XFS_PQUOTA_ACCT|XFS_OQUOTA_ENFD)) seq_puts(m, "," MNTOPT_PRJQUOTA); else if (mp->m_qflags & XFS_PQUOTA_ACCT) seq_puts(m, "," MNTOPT_PQUOTANOENF); if (mp->m_qflags & (XFS_GQUOTA_ACCT|XFS_OQUOTA_ENFD)) seq_puts(m, "," MNTOPT_GRPQUOTA); else if (mp->m_qflags & XFS_GQUOTA_ACCT) seq_puts(m, "," MNTOPT_GQUOTANOENF); The problem is that XFS_OQUOTA_ENFD will be set in mp->m_qflags if either group or project quotas are enforced, and as a result both MNTOPT_PRJQUOTA and MNTOPT_GRPQUOTA will be shown as mount options. Signed-off-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-09-03 06:02:24 +08:00
if (mp->m_qflags & XFS_PQUOTA_ACCT) {
if (mp->m_qflags & XFS_PQUOTA_ENFD)
seq_puts(m, ",prjquota");
xfs: xfs_showargs() reports group *and* project quotas enabled If you enable group or project quotas on an XFS file system, then the mount table presented through /proc/self/mounts erroneously shows that both options are in effect for the file system. The root of the problem is some bad logic in the xfs_showargs() function, which is used to format the file system type-specific options in effect for a file system. The problem originated in this GIT commit: Move platform specific mount option parse out of core XFS code Date: 11/22/07 Author: Dave Chinner SHA1 ID: a67d7c5f5d25d0b13a4dfb182697135b014fa478 For XFS quotas, project and group quota management are mutually exclusive--only one can be in effect at a time. There are two parts to managing quotas: aggregating usage information; and enforcing limits. It is possible to have a quota in effect (aggregating usage) but not enforced. These features are recorded on an XFS mount point using these flags: XFS_PQUOTA_ACCT - Project quotas are aggregated XFS_GQUOTA_ACCT - Group quotas are aggregated XFS_OQUOTA_ENFD - Project/group quotas are enforced The code in error is in fs/xfs/linux-2.6/xfs_super.c: if (mp->m_qflags & (XFS_PQUOTA_ACCT|XFS_OQUOTA_ENFD)) seq_puts(m, "," MNTOPT_PRJQUOTA); else if (mp->m_qflags & XFS_PQUOTA_ACCT) seq_puts(m, "," MNTOPT_PQUOTANOENF); if (mp->m_qflags & (XFS_GQUOTA_ACCT|XFS_OQUOTA_ENFD)) seq_puts(m, "," MNTOPT_GRPQUOTA); else if (mp->m_qflags & XFS_GQUOTA_ACCT) seq_puts(m, "," MNTOPT_GQUOTANOENF); The problem is that XFS_OQUOTA_ENFD will be set in mp->m_qflags if either group or project quotas are enforced, and as a result both MNTOPT_PRJQUOTA and MNTOPT_GRPQUOTA will be shown as mount options. Signed-off-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-09-03 06:02:24 +08:00
else
seq_puts(m, ",pqnoenforce");
}
if (mp->m_qflags & XFS_GQUOTA_ACCT) {
if (mp->m_qflags & XFS_GQUOTA_ENFD)
seq_puts(m, ",grpquota");
xfs: xfs_showargs() reports group *and* project quotas enabled If you enable group or project quotas on an XFS file system, then the mount table presented through /proc/self/mounts erroneously shows that both options are in effect for the file system. The root of the problem is some bad logic in the xfs_showargs() function, which is used to format the file system type-specific options in effect for a file system. The problem originated in this GIT commit: Move platform specific mount option parse out of core XFS code Date: 11/22/07 Author: Dave Chinner SHA1 ID: a67d7c5f5d25d0b13a4dfb182697135b014fa478 For XFS quotas, project and group quota management are mutually exclusive--only one can be in effect at a time. There are two parts to managing quotas: aggregating usage information; and enforcing limits. It is possible to have a quota in effect (aggregating usage) but not enforced. These features are recorded on an XFS mount point using these flags: XFS_PQUOTA_ACCT - Project quotas are aggregated XFS_GQUOTA_ACCT - Group quotas are aggregated XFS_OQUOTA_ENFD - Project/group quotas are enforced The code in error is in fs/xfs/linux-2.6/xfs_super.c: if (mp->m_qflags & (XFS_PQUOTA_ACCT|XFS_OQUOTA_ENFD)) seq_puts(m, "," MNTOPT_PRJQUOTA); else if (mp->m_qflags & XFS_PQUOTA_ACCT) seq_puts(m, "," MNTOPT_PQUOTANOENF); if (mp->m_qflags & (XFS_GQUOTA_ACCT|XFS_OQUOTA_ENFD)) seq_puts(m, "," MNTOPT_GRPQUOTA); else if (mp->m_qflags & XFS_GQUOTA_ACCT) seq_puts(m, "," MNTOPT_GQUOTANOENF); The problem is that XFS_OQUOTA_ENFD will be set in mp->m_qflags if either group or project quotas are enforced, and as a result both MNTOPT_PRJQUOTA and MNTOPT_GRPQUOTA will be shown as mount options. Signed-off-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-09-03 06:02:24 +08:00
else
seq_puts(m, ",gqnoenforce");
xfs: xfs_showargs() reports group *and* project quotas enabled If you enable group or project quotas on an XFS file system, then the mount table presented through /proc/self/mounts erroneously shows that both options are in effect for the file system. The root of the problem is some bad logic in the xfs_showargs() function, which is used to format the file system type-specific options in effect for a file system. The problem originated in this GIT commit: Move platform specific mount option parse out of core XFS code Date: 11/22/07 Author: Dave Chinner SHA1 ID: a67d7c5f5d25d0b13a4dfb182697135b014fa478 For XFS quotas, project and group quota management are mutually exclusive--only one can be in effect at a time. There are two parts to managing quotas: aggregating usage information; and enforcing limits. It is possible to have a quota in effect (aggregating usage) but not enforced. These features are recorded on an XFS mount point using these flags: XFS_PQUOTA_ACCT - Project quotas are aggregated XFS_GQUOTA_ACCT - Group quotas are aggregated XFS_OQUOTA_ENFD - Project/group quotas are enforced The code in error is in fs/xfs/linux-2.6/xfs_super.c: if (mp->m_qflags & (XFS_PQUOTA_ACCT|XFS_OQUOTA_ENFD)) seq_puts(m, "," MNTOPT_PRJQUOTA); else if (mp->m_qflags & XFS_PQUOTA_ACCT) seq_puts(m, "," MNTOPT_PQUOTANOENF); if (mp->m_qflags & (XFS_GQUOTA_ACCT|XFS_OQUOTA_ENFD)) seq_puts(m, "," MNTOPT_GRPQUOTA); else if (mp->m_qflags & XFS_GQUOTA_ACCT) seq_puts(m, "," MNTOPT_GQUOTANOENF); The problem is that XFS_OQUOTA_ENFD will be set in mp->m_qflags if either group or project quotas are enforced, and as a result both MNTOPT_PRJQUOTA and MNTOPT_GRPQUOTA will be shown as mount options. Signed-off-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-09-03 06:02:24 +08:00
}
if (!(mp->m_qflags & XFS_ALL_QUOTA_ACCT))
seq_puts(m, ",noquota");
return 0;
}
/*
* Set parameters for inode allocation heuristics, taking into account
* filesystem size and inode32/inode64 mount options; i.e. specifically
* whether or not XFS_MOUNT_SMALL_INUMS is set.
*
* Inode allocation patterns are altered only if inode32 is requested
* (XFS_MOUNT_SMALL_INUMS), and the filesystem is sufficiently large.
* If altered, XFS_MOUNT_32BITINODES is set as well.
*
* An agcount independent of that in the mount structure is provided
* because in the growfs case, mp->m_sb.sb_agcount is not yet updated
* to the potentially higher ag count.
*
* Returns the maximum AG index which may contain inodes.
*/
xfs_agnumber_t
xfs_set_inode_alloc(
struct xfs_mount *mp,
xfs_agnumber_t agcount)
{
xfs_agnumber_t index;
xfs_agnumber_t maxagi = 0;
xfs_sb_t *sbp = &mp->m_sb;
xfs_agnumber_t max_metadata;
xfs_agino_t agino;
xfs_ino_t ino;
/*
* Calculate how much should be reserved for inodes to meet
* the max inode percentage. Used only for inode32.
*/
if (M_IGEO(mp)->maxicount) {
uint64_t icount;
icount = sbp->sb_dblocks * sbp->sb_imax_pct;
do_div(icount, 100);
icount += sbp->sb_agblocks - 1;
do_div(icount, sbp->sb_agblocks);
max_metadata = icount;
} else {
max_metadata = agcount;
}
/* Get the last possible inode in the filesystem */
agino = XFS_AGB_TO_AGINO(mp, sbp->sb_agblocks - 1);
ino = XFS_AGINO_TO_INO(mp, agcount - 1, agino);
/*
* If user asked for no more than 32-bit inodes, and the fs is
* sufficiently large, set XFS_MOUNT_32BITINODES if we must alter
* the allocator to accommodate the request.
*/
if ((mp->m_flags & XFS_MOUNT_SMALL_INUMS) && ino > XFS_MAXINUMBER_32)
mp->m_flags |= XFS_MOUNT_32BITINODES;
else
mp->m_flags &= ~XFS_MOUNT_32BITINODES;
for (index = 0; index < agcount; index++) {
struct xfs_perag *pag;
ino = XFS_AGINO_TO_INO(mp, index, agino);
pag = xfs_perag_get(mp, index);
if (mp->m_flags & XFS_MOUNT_32BITINODES) {
if (ino > XFS_MAXINUMBER_32) {
pag->pagi_inodeok = 0;
pag->pagf_metadata = 0;
} else {
pag->pagi_inodeok = 1;
maxagi++;
if (index < max_metadata)
pag->pagf_metadata = 1;
else
pag->pagf_metadata = 0;
}
} else {
pag->pagi_inodeok = 1;
pag->pagf_metadata = 0;
}
xfs_perag_put(pag);
}
return (mp->m_flags & XFS_MOUNT_32BITINODES) ? maxagi : agcount;
}
STATIC int
xfs_blkdev_get(
xfs_mount_t *mp,
const char *name,
struct block_device **bdevp)
{
int error = 0;
*bdevp = blkdev_get_by_path(name, FMODE_READ|FMODE_WRITE|FMODE_EXCL,
mp);
if (IS_ERR(*bdevp)) {
error = PTR_ERR(*bdevp);
xfs_warn(mp, "Invalid device [%s], error=%d", name, error);
}
return error;
}
STATIC void
xfs_blkdev_put(
struct block_device *bdev)
{
if (bdev)
block: make blkdev_get/put() handle exclusive access Over time, block layer has accumulated a set of APIs dealing with bdev open, close, claim and release. * blkdev_get/put() are the primary open and close functions. * bd_claim/release() deal with exclusive open. * open/close_bdev_exclusive() are combination of open and claim and the other way around, respectively. * bd_link/unlink_disk_holder() to create and remove holder/slave symlinks. * open_by_devnum() wraps bdget() + blkdev_get(). The interface is a bit confusing and the decoupling of open and claim makes it impossible to properly guarantee exclusive access as in-kernel open + claim sequence can disturb the existing exclusive open even before the block layer knows the current open if for another exclusive access. Reorganize the interface such that, * blkdev_get() is extended to include exclusive access management. @holder argument is added and, if is @FMODE_EXCL specified, it will gain exclusive access atomically w.r.t. other exclusive accesses. * blkdev_put() is similarly extended. It now takes @mode argument and if @FMODE_EXCL is set, it releases an exclusive access. Also, when the last exclusive claim is released, the holder/slave symlinks are removed automatically. * bd_claim/release() and close_bdev_exclusive() are no longer necessary and either made static or removed. * bd_link_disk_holder() remains the same but bd_unlink_disk_holder() is no longer necessary and removed. * open_bdev_exclusive() becomes a simple wrapper around lookup_bdev() and blkdev_get(). It also has an unexpected extra bdev_read_only() test which probably should be moved into blkdev_get(). * open_by_devnum() is modified to take @holder argument and pass it to blkdev_get(). Most of bdev open/close operations are unified into blkdev_get/put() and most exclusive accesses are tested atomically at the open time (as it should). This cleans up code and removes some, both valid and invalid, but unnecessary all the same, corner cases. open_bdev_exclusive() and open_by_devnum() can use further cleanup - rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop special features. Well, let's leave them for another day. Most conversions are straight-forward. drbd conversion is a bit more involved as there was some reordering, but the logic should stay the same. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Neil Brown <neilb@suse.de> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Philipp Reisner <philipp.reisner@linbit.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Alex Elder <aelder@sgi.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: dm-devel@redhat.com Cc: drbd-dev@lists.linbit.com Cc: Leo Chen <leochen@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Joern Engel <joern@logfs.org> Cc: reiserfs-devel@vger.kernel.org Cc: Alexander Viro <viro@zeniv.linux.org.uk>
2010-11-13 18:55:17 +08:00
blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
}
void
xfs_blkdev_issue_flush(
xfs_buftarg_t *buftarg)
{
blkdev_issue_flush(buftarg->bt_bdev, GFP_NOFS, NULL);
}
STATIC void
xfs_close_devices(
struct xfs_mount *mp)
{
struct dax_device *dax_ddev = mp->m_ddev_targp->bt_daxdev;
if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) {
struct block_device *logdev = mp->m_logdev_targp->bt_bdev;
struct dax_device *dax_logdev = mp->m_logdev_targp->bt_daxdev;
xfs_free_buftarg(mp->m_logdev_targp);
xfs_blkdev_put(logdev);
fs_put_dax(dax_logdev);
}
if (mp->m_rtdev_targp) {
struct block_device *rtdev = mp->m_rtdev_targp->bt_bdev;
struct dax_device *dax_rtdev = mp->m_rtdev_targp->bt_daxdev;
xfs_free_buftarg(mp->m_rtdev_targp);
xfs_blkdev_put(rtdev);
fs_put_dax(dax_rtdev);
}
xfs_free_buftarg(mp->m_ddev_targp);
fs_put_dax(dax_ddev);
}
/*
* The file system configurations are:
* (1) device (partition) with data and internal log
* (2) logical volume with data and log subvolumes.
* (3) logical volume with data, log, and realtime subvolumes.
*
* We only have to handle opening the log and realtime volumes here if
* they are present. The data subvolume has already been opened by
* get_sb_bdev() and is stored in sb->s_bdev.
*/
STATIC int
xfs_open_devices(
struct xfs_mount *mp)
{
struct block_device *ddev = mp->m_super->s_bdev;
struct dax_device *dax_ddev = fs_dax_get_by_bdev(ddev);
struct dax_device *dax_logdev = NULL, *dax_rtdev = NULL;
struct block_device *logdev = NULL, *rtdev = NULL;
int error;
/*
* Open real time and log devices - order is important.
*/
if (mp->m_logname) {
error = xfs_blkdev_get(mp, mp->m_logname, &logdev);
if (error)
goto out;
dax_logdev = fs_dax_get_by_bdev(logdev);
}
if (mp->m_rtname) {
error = xfs_blkdev_get(mp, mp->m_rtname, &rtdev);
if (error)
goto out_close_logdev;
if (rtdev == ddev || rtdev == logdev) {
xfs_warn(mp,
"Cannot mount filesystem with identical rtdev and ddev/logdev.");
error = -EINVAL;
goto out_close_rtdev;
}
dax_rtdev = fs_dax_get_by_bdev(rtdev);
}
/*
* Setup xfs_mount buffer target pointers
*/
error = -ENOMEM;
mp->m_ddev_targp = xfs_alloc_buftarg(mp, ddev, dax_ddev);
if (!mp->m_ddev_targp)
goto out_close_rtdev;
if (rtdev) {
mp->m_rtdev_targp = xfs_alloc_buftarg(mp, rtdev, dax_rtdev);
if (!mp->m_rtdev_targp)
goto out_free_ddev_targ;
}
if (logdev && logdev != ddev) {
mp->m_logdev_targp = xfs_alloc_buftarg(mp, logdev, dax_logdev);
if (!mp->m_logdev_targp)
goto out_free_rtdev_targ;
} else {
mp->m_logdev_targp = mp->m_ddev_targp;
}
return 0;
out_free_rtdev_targ:
if (mp->m_rtdev_targp)
xfs_free_buftarg(mp->m_rtdev_targp);
out_free_ddev_targ:
xfs_free_buftarg(mp->m_ddev_targp);
out_close_rtdev:
xfs_blkdev_put(rtdev);
fs_put_dax(dax_rtdev);
out_close_logdev:
if (logdev && logdev != ddev) {
xfs_blkdev_put(logdev);
fs_put_dax(dax_logdev);
}
out:
fs_put_dax(dax_ddev);
return error;
}
/*
* Setup xfs_mount buffer target pointers based on superblock
*/
STATIC int
xfs_setup_devices(
struct xfs_mount *mp)
{
int error;
error = xfs_setsize_buftarg(mp->m_ddev_targp, mp->m_sb.sb_sectsize);
if (error)
return error;
if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) {
unsigned int log_sector_size = BBSIZE;
if (xfs_sb_version_hassector(&mp->m_sb))
log_sector_size = mp->m_sb.sb_logsectsize;
error = xfs_setsize_buftarg(mp->m_logdev_targp,
log_sector_size);
if (error)
return error;
}
if (mp->m_rtdev_targp) {
error = xfs_setsize_buftarg(mp->m_rtdev_targp,
mp->m_sb.sb_sectsize);
if (error)
return error;
}
return 0;
}
STATIC int
xfs_init_mount_workqueues(
struct xfs_mount *mp)
{
xfs: replace global xfslogd wq with per-mount wq The xfslogd workqueue is a global, single-job workqueue for buffer ioend processing. This means we allow for a single work item at a time for all possible XFS mounts on a system. fsstress testing in loopback XFS over XFS configurations has reproduced xfslogd deadlocks due to the single threaded nature of the queue and dependencies introduced between the separate XFS instances by online discard (-o discard). Discard over a loopback device converts the discard request to a hole punch (fallocate) on the underlying file. Online discard requests are issued synchronously and from xfslogd context in XFS, hence the xfslogd workqueue is blocked in the upper fs waiting on a hole punch request to be servied in the lower fs. If the lower fs issues I/O that depends on xfslogd to complete, both filesystems end up hung indefinitely. This is reproduced reliabily by generic/013 on XFS->loop->XFS test devices with the '-o discard' mount option. Further, docker implementations appear to use this kind of configuration for container instance filesystems by default (container fs->dm-> loop->base fs) and therefore are subject to this deadlock when running on XFS. Replace the global xfslogd workqueue with a per-mount variant. This guarantees each mount access to a single worker and prevents deadlocks due to inter-fs dependencies introduced by discard. Since the queue is only responsible for buffer iodone processing at this point in time, rename xfslogd to xfs-buf. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-28 10:59:58 +08:00
mp->m_buf_workqueue = alloc_workqueue("xfs-buf/%s",
WQ_MEM_RECLAIM|WQ_FREEZABLE, 1, mp->m_super->s_id);
xfs: replace global xfslogd wq with per-mount wq The xfslogd workqueue is a global, single-job workqueue for buffer ioend processing. This means we allow for a single work item at a time for all possible XFS mounts on a system. fsstress testing in loopback XFS over XFS configurations has reproduced xfslogd deadlocks due to the single threaded nature of the queue and dependencies introduced between the separate XFS instances by online discard (-o discard). Discard over a loopback device converts the discard request to a hole punch (fallocate) on the underlying file. Online discard requests are issued synchronously and from xfslogd context in XFS, hence the xfslogd workqueue is blocked in the upper fs waiting on a hole punch request to be servied in the lower fs. If the lower fs issues I/O that depends on xfslogd to complete, both filesystems end up hung indefinitely. This is reproduced reliabily by generic/013 on XFS->loop->XFS test devices with the '-o discard' mount option. Further, docker implementations appear to use this kind of configuration for container instance filesystems by default (container fs->dm-> loop->base fs) and therefore are subject to this deadlock when running on XFS. Replace the global xfslogd workqueue with a per-mount variant. This guarantees each mount access to a single worker and prevents deadlocks due to inter-fs dependencies introduced by discard. Since the queue is only responsible for buffer iodone processing at this point in time, rename xfslogd to xfs-buf. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-28 10:59:58 +08:00
if (!mp->m_buf_workqueue)
goto out;
mp->m_unwritten_workqueue = alloc_workqueue("xfs-conv/%s",
WQ_MEM_RECLAIM|WQ_FREEZABLE, 0, mp->m_super->s_id);
if (!mp->m_unwritten_workqueue)
goto out_destroy_buf;
mp->m_cil_workqueue = alloc_workqueue("xfs-cil/%s",
xfs: prevent CIL push holdoff in log recovery generic/530 on a machine with enough ram and a non-preemptible kernel can run the AGI processing phase of log recovery enitrely out of cache. This means it never blocks on locks, never waits for IO and runs entirely through the unlinked lists until it either completes or blocks and hangs because it has run out of log space. It runs out of log space because the background CIL push is scheduled but never runs. queue_work() queues the CIL work on the current CPU that is busy, and the workqueue code will not run it on any other CPU. Hence if the unlinked list processing never yields the CPU voluntarily, the push work is delayed indefinitely. This results in the CIL aggregating changes until all the log space is consumed. When the log recoveyr processing evenutally blocks, the CIL flushes but because the last iclog isn't submitted for IO because it isn't full, the CIL flush never completes and nothing ever moves the log head forwards, or indeed inserts anything into the tail of the log, and hence nothing is able to get the log moving again and recovery hangs. There are several problems here, but the two obvious ones from the trace are that: a) log recovery does not yield the CPU for over 4 seconds, b) binding CIL pushes to a single CPU is a really bad idea. This patch addresses just these two aspects of the problem, and are suitable for backporting to work around any issues in older kernels. The more fundamental problem of preventing the CIL from consuming more than 50% of the log without committing will take more invasive and complex work, so will be done as followup work. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-09-06 12:35:39 +08:00
WQ_MEM_RECLAIM | WQ_FREEZABLE | WQ_UNBOUND,
0, mp->m_super->s_id);
if (!mp->m_cil_workqueue)
goto out_destroy_unwritten;
mp->m_reclaim_workqueue = alloc_workqueue("xfs-reclaim/%s",
WQ_MEM_RECLAIM|WQ_FREEZABLE, 0, mp->m_super->s_id);
if (!mp->m_reclaim_workqueue)
goto out_destroy_cil;
mp->m_eofblocks_workqueue = alloc_workqueue("xfs-eofblocks/%s",
WQ_MEM_RECLAIM|WQ_FREEZABLE, 0, mp->m_super->s_id);
if (!mp->m_eofblocks_workqueue)
goto out_destroy_reclaim;
mp->m_sync_workqueue = alloc_workqueue("xfs-sync/%s", WQ_FREEZABLE, 0,
mp->m_super->s_id);
if (!mp->m_sync_workqueue)
goto out_destroy_eofb;
return 0;
out_destroy_eofb:
destroy_workqueue(mp->m_eofblocks_workqueue);
out_destroy_reclaim:
destroy_workqueue(mp->m_reclaim_workqueue);
out_destroy_cil:
destroy_workqueue(mp->m_cil_workqueue);
out_destroy_unwritten:
destroy_workqueue(mp->m_unwritten_workqueue);
xfs: replace global xfslogd wq with per-mount wq The xfslogd workqueue is a global, single-job workqueue for buffer ioend processing. This means we allow for a single work item at a time for all possible XFS mounts on a system. fsstress testing in loopback XFS over XFS configurations has reproduced xfslogd deadlocks due to the single threaded nature of the queue and dependencies introduced between the separate XFS instances by online discard (-o discard). Discard over a loopback device converts the discard request to a hole punch (fallocate) on the underlying file. Online discard requests are issued synchronously and from xfslogd context in XFS, hence the xfslogd workqueue is blocked in the upper fs waiting on a hole punch request to be servied in the lower fs. If the lower fs issues I/O that depends on xfslogd to complete, both filesystems end up hung indefinitely. This is reproduced reliabily by generic/013 on XFS->loop->XFS test devices with the '-o discard' mount option. Further, docker implementations appear to use this kind of configuration for container instance filesystems by default (container fs->dm-> loop->base fs) and therefore are subject to this deadlock when running on XFS. Replace the global xfslogd workqueue with a per-mount variant. This guarantees each mount access to a single worker and prevents deadlocks due to inter-fs dependencies introduced by discard. Since the queue is only responsible for buffer iodone processing at this point in time, rename xfslogd to xfs-buf. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-28 10:59:58 +08:00
out_destroy_buf:
destroy_workqueue(mp->m_buf_workqueue);
out:
return -ENOMEM;
}
STATIC void
xfs_destroy_mount_workqueues(
struct xfs_mount *mp)
{
destroy_workqueue(mp->m_sync_workqueue);
destroy_workqueue(mp->m_eofblocks_workqueue);
destroy_workqueue(mp->m_reclaim_workqueue);
destroy_workqueue(mp->m_cil_workqueue);
destroy_workqueue(mp->m_unwritten_workqueue);
xfs: replace global xfslogd wq with per-mount wq The xfslogd workqueue is a global, single-job workqueue for buffer ioend processing. This means we allow for a single work item at a time for all possible XFS mounts on a system. fsstress testing in loopback XFS over XFS configurations has reproduced xfslogd deadlocks due to the single threaded nature of the queue and dependencies introduced between the separate XFS instances by online discard (-o discard). Discard over a loopback device converts the discard request to a hole punch (fallocate) on the underlying file. Online discard requests are issued synchronously and from xfslogd context in XFS, hence the xfslogd workqueue is blocked in the upper fs waiting on a hole punch request to be servied in the lower fs. If the lower fs issues I/O that depends on xfslogd to complete, both filesystems end up hung indefinitely. This is reproduced reliabily by generic/013 on XFS->loop->XFS test devices with the '-o discard' mount option. Further, docker implementations appear to use this kind of configuration for container instance filesystems by default (container fs->dm-> loop->base fs) and therefore are subject to this deadlock when running on XFS. Replace the global xfslogd workqueue with a per-mount variant. This guarantees each mount access to a single worker and prevents deadlocks due to inter-fs dependencies introduced by discard. Since the queue is only responsible for buffer iodone processing at this point in time, rename xfslogd to xfs-buf. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-28 10:59:58 +08:00
destroy_workqueue(mp->m_buf_workqueue);
}
xfs: xfs_sync_data is redundant. We don't do any data writeback from XFS any more - the VFS is completely responsible for that, including for freeze. We can replace the remaining caller with a VFS level function that achieves the same thing, but without conflicting with current writeback work. This means we can remove the flush_work and xfs_flush_inodes() - the VFS functionality completely replaces the internal flush queue for doing this writeback work in a separate context to avoid stack overruns. This does have one complication - it cannot be called with page locks held. Hence move the flushing of delalloc space when ENOSPC occurs back up into xfs_file_aio_buffered_write when we don't hold any locks that will stall writeback. Unfortunately, writeback_inodes_sb_if_idle() is not sufficient to trigger delalloc conversion fast enough to prevent spurious ENOSPC whent here are hundreds of writers, thousands of small files and GBs of free RAM. Hence we need to use sync_sb_inodes() to block callers while we wait for writeback like the previous xfs_flush_inodes implementation did. That means we have to hold the s_umount lock here, but because this call can nest inside i_mutex (the parent directory in the create case, held by the VFS), we have to use down_read_trylock() to avoid potential deadlocks. In practice, this trylock will succeed on almost every attempt as unmount/remount type operations are exceedingly rare. Note: we always need to pass a count of zero to generic_file_buffered_write() as the previously written byte count. We only do this by accident before this patch by the virtue of ret always being zero when there are no errors. Make this explicit rather than needing to specifically zero ret in the ENOSPC retry case. Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-08 18:56:04 +08:00
/*
* Flush all dirty data to disk. Must not be called while holding an XFS_ILOCK
* or a page lock. We use sync_inodes_sb() here to ensure we block while waiting
* for IO to complete so that we effectively throttle multiple callers to the
* rate at which IO is completing.
*/
void
xfs_flush_inodes(
struct xfs_mount *mp)
{
struct super_block *sb = mp->m_super;
if (down_read_trylock(&sb->s_umount)) {
sync_inodes_sb(sb);
xfs: xfs_sync_data is redundant. We don't do any data writeback from XFS any more - the VFS is completely responsible for that, including for freeze. We can replace the remaining caller with a VFS level function that achieves the same thing, but without conflicting with current writeback work. This means we can remove the flush_work and xfs_flush_inodes() - the VFS functionality completely replaces the internal flush queue for doing this writeback work in a separate context to avoid stack overruns. This does have one complication - it cannot be called with page locks held. Hence move the flushing of delalloc space when ENOSPC occurs back up into xfs_file_aio_buffered_write when we don't hold any locks that will stall writeback. Unfortunately, writeback_inodes_sb_if_idle() is not sufficient to trigger delalloc conversion fast enough to prevent spurious ENOSPC whent here are hundreds of writers, thousands of small files and GBs of free RAM. Hence we need to use sync_sb_inodes() to block callers while we wait for writeback like the previous xfs_flush_inodes implementation did. That means we have to hold the s_umount lock here, but because this call can nest inside i_mutex (the parent directory in the create case, held by the VFS), we have to use down_read_trylock() to avoid potential deadlocks. In practice, this trylock will succeed on almost every attempt as unmount/remount type operations are exceedingly rare. Note: we always need to pass a count of zero to generic_file_buffered_write() as the previously written byte count. We only do this by accident before this patch by the virtue of ret always being zero when there are no errors. Make this explicit rather than needing to specifically zero ret in the ENOSPC retry case. Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-08 18:56:04 +08:00
up_read(&sb->s_umount);
}
}
/* Catch misguided souls that try to use this interface on XFS */
STATIC struct inode *
xfs_fs_alloc_inode(
struct super_block *sb)
{
BUG();
return NULL;
}
#ifdef DEBUG
static void
xfs_check_delalloc(
struct xfs_inode *ip,
int whichfork)
{
struct xfs_ifork *ifp = XFS_IFORK_PTR(ip, whichfork);
struct xfs_bmbt_irec got;
struct xfs_iext_cursor icur;
if (!ifp || !xfs_iext_lookup_extent(ip, ifp, 0, &icur, &got))
return;
do {
if (isnullstartblock(got.br_startblock)) {
xfs_warn(ip->i_mount,
"ino %llx %s fork has delalloc extent at [0x%llx:0x%llx]",
ip->i_ino,
whichfork == XFS_DATA_FORK ? "data" : "cow",
got.br_startoff, got.br_blockcount);
}
} while (xfs_iext_next_extent(ifp, &icur, &got));
}
#else
#define xfs_check_delalloc(ip, whichfork) do { } while (0)
#endif
/*
* Now that the generic code is guaranteed not to be accessing
xfs: remove xfs_fs_evict_inode() Joe Lawrence reported a list_add corruption with 4.6-rc1 when testing some custom md administration code that made it's own block device nodes for the md array. The simple test loop of: for i in {0..100}; do mknod --mode=0600 $tmp/tmp_node b $MAJOR $MINOR mdadm --detail --export $tmp/tmp_node > /dev/null rm -f $tmp/tmp_node done Would produce this warning in bd_acquire() when mdadm opened the device node: list_add double add: new=ffff88043831c7b8, prev=ffff8804380287d8, next=ffff88043831c7b8. And then produce this from bd_forget from kdevtmpfs evicting a block dev inode: list_del corruption. prev->next should be ffff8800bb83eb10, but was ffff88043831c7b8 This is a regression caused by commit c19b3b05 ("xfs: mode di_mode to vfs inode"). The issue is that xfs_inactive() frees the unlinked inode, and the above commit meant that this freeing zeroed the mode in the struct inode. The problem is that after evict() has called ->evict_inode, it expects the i_mode to be intact so that it can call bd_forget() or cd_forget() to drop the reference to the block device inode attached to the XFS inode. In reality, the only thing we do in xfs_fs_evict_inode() that is not generic is call xfs_inactive(). We can move the xfs_inactive() call to xfs_fs_destroy_inode() without any problems at all, and this will leave the VFS inode intact until it is completely done with it. So, remove xfs_fs_evict_inode(), and do the work it used to do in ->destroy_inode instead. cc: <stable@vger.kernel.org> # 4.6 Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-05-18 11:52:42 +08:00
* the linux inode, we can inactivate and reclaim the inode.
*/
STATIC void
xfs_fs_destroy_inode(
struct inode *inode)
{
struct xfs_inode *ip = XFS_I(inode);
trace_xfs_destroy_inode(ip);
ASSERT(!rwsem_is_locked(&inode->i_rwsem));
xfs: remove xfs_fs_evict_inode() Joe Lawrence reported a list_add corruption with 4.6-rc1 when testing some custom md administration code that made it's own block device nodes for the md array. The simple test loop of: for i in {0..100}; do mknod --mode=0600 $tmp/tmp_node b $MAJOR $MINOR mdadm --detail --export $tmp/tmp_node > /dev/null rm -f $tmp/tmp_node done Would produce this warning in bd_acquire() when mdadm opened the device node: list_add double add: new=ffff88043831c7b8, prev=ffff8804380287d8, next=ffff88043831c7b8. And then produce this from bd_forget from kdevtmpfs evicting a block dev inode: list_del corruption. prev->next should be ffff8800bb83eb10, but was ffff88043831c7b8 This is a regression caused by commit c19b3b05 ("xfs: mode di_mode to vfs inode"). The issue is that xfs_inactive() frees the unlinked inode, and the above commit meant that this freeing zeroed the mode in the struct inode. The problem is that after evict() has called ->evict_inode, it expects the i_mode to be intact so that it can call bd_forget() or cd_forget() to drop the reference to the block device inode attached to the XFS inode. In reality, the only thing we do in xfs_fs_evict_inode() that is not generic is call xfs_inactive(). We can move the xfs_inactive() call to xfs_fs_destroy_inode() without any problems at all, and this will leave the VFS inode intact until it is completely done with it. So, remove xfs_fs_evict_inode(), and do the work it used to do in ->destroy_inode instead. cc: <stable@vger.kernel.org> # 4.6 Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-05-18 11:52:42 +08:00
XFS_STATS_INC(ip->i_mount, vn_rele);
XFS_STATS_INC(ip->i_mount, vn_remove);
xfs_inactive(ip);
if (!XFS_FORCED_SHUTDOWN(ip->i_mount) && ip->i_delayed_blks) {
xfs_check_delalloc(ip, XFS_DATA_FORK);
xfs_check_delalloc(ip, XFS_COW_FORK);
ASSERT(0);
}
xfs: remove xfs_fs_evict_inode() Joe Lawrence reported a list_add corruption with 4.6-rc1 when testing some custom md administration code that made it's own block device nodes for the md array. The simple test loop of: for i in {0..100}; do mknod --mode=0600 $tmp/tmp_node b $MAJOR $MINOR mdadm --detail --export $tmp/tmp_node > /dev/null rm -f $tmp/tmp_node done Would produce this warning in bd_acquire() when mdadm opened the device node: list_add double add: new=ffff88043831c7b8, prev=ffff8804380287d8, next=ffff88043831c7b8. And then produce this from bd_forget from kdevtmpfs evicting a block dev inode: list_del corruption. prev->next should be ffff8800bb83eb10, but was ffff88043831c7b8 This is a regression caused by commit c19b3b05 ("xfs: mode di_mode to vfs inode"). The issue is that xfs_inactive() frees the unlinked inode, and the above commit meant that this freeing zeroed the mode in the struct inode. The problem is that after evict() has called ->evict_inode, it expects the i_mode to be intact so that it can call bd_forget() or cd_forget() to drop the reference to the block device inode attached to the XFS inode. In reality, the only thing we do in xfs_fs_evict_inode() that is not generic is call xfs_inactive(). We can move the xfs_inactive() call to xfs_fs_destroy_inode() without any problems at all, and this will leave the VFS inode intact until it is completely done with it. So, remove xfs_fs_evict_inode(), and do the work it used to do in ->destroy_inode instead. cc: <stable@vger.kernel.org> # 4.6 Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-05-18 11:52:42 +08:00
XFS_STATS_INC(ip->i_mount, vn_reclaim);
/*
* We should never get here with one of the reclaim flags already set.
*/
ASSERT_ALWAYS(!xfs_iflags_test(ip, XFS_IRECLAIMABLE));
ASSERT_ALWAYS(!xfs_iflags_test(ip, XFS_IRECLAIM));
/*
* We always use background reclaim here because even if the
* inode is clean, it still may be under IO and hence we have
* to take the flush lock. The background reclaim path handles
* this more efficiently than we can here, so simply let background
* reclaim tear down all inodes.
*/
xfs_inode_set_reclaim_tag(ip);
}
static void
xfs_fs_dirty_inode(
struct inode *inode,
int flag)
{
struct xfs_inode *ip = XFS_I(inode);
struct xfs_mount *mp = ip->i_mount;
struct xfs_trans *tp;
if (!(inode->i_sb->s_flags & SB_LAZYTIME))
return;
if (flag != I_DIRTY_SYNC || !(inode->i_state & I_DIRTY_TIME))
return;
if (xfs_trans_alloc(mp, &M_RES(mp)->tr_fsyncts, 0, 0, 0, &tp))
return;
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
xfs_trans_log_inode(tp, ip, XFS_ILOG_TIMESTAMP);
xfs_trans_commit(tp);
}
/*
* Slab object creation initialisation for the XFS inode.
* This covers only the idempotent fields in the XFS inode;
* all other fields need to be initialised on allocation
* from the slab. This avoids the need to repeatedly initialise
* fields in the xfs inode that left in the initialise state
* when freeing the inode.
*/
STATIC void
xfs_fs_inode_init_once(
void *inode)
{
struct xfs_inode *ip = inode;
memset(ip, 0, sizeof(struct xfs_inode));
/* vfs inode */
inode_init_once(VFS_I(ip));
/* xfs inode */
atomic_set(&ip->i_pincount, 0);
spin_lock_init(&ip->i_flags_lock);
mrlock_init(&ip->i_mmaplock, MRLOCK_ALLOW_EQUAL_PRI|MRLOCK_BARRIER,
"xfsino", ip->i_ino);
mrlock_init(&ip->i_lock, MRLOCK_ALLOW_EQUAL_PRI|MRLOCK_BARRIER,
"xfsino", ip->i_ino);
}
/*
* We do an unlocked check for XFS_IDONTCACHE here because we are already
* serialised against cache hits here via the inode->i_lock and igrab() in
* xfs_iget_cache_hit(). Hence a lookup that might clear this flag will not be
* racing with us, and it avoids needing to grab a spinlock here for every inode
* we drop the final reference on.
*/
STATIC int
xfs_fs_drop_inode(
struct inode *inode)
{
struct xfs_inode *ip = XFS_I(inode);
/*
* If this unlinked inode is in the middle of recovery, don't
* drop the inode just yet; log recovery will take care of
* that. See the comment for this inode flag.
*/
if (ip->i_flags & XFS_IRECOVERY) {
ASSERT(ip->i_mount->m_log->l_flags & XLOG_RECOVERY_NEEDED);
return 0;
}
return generic_drop_inode(inode) || (ip->i_flags & XFS_IDONTCACHE);
}
static void
xfs_mount_free(
struct xfs_mount *mp)
{
kfree(mp->m_rtname);
kfree(mp->m_logname);
kmem_free(mp);
}
STATIC int
xfs_fs_sync_fs(
struct super_block *sb,
int wait)
{
struct xfs_mount *mp = XFS_M(sb);
/*
* Doing anything during the async pass would be counterproductive.
*/
if (!wait)
return 0;
xfs_log_force(mp, XFS_LOG_SYNC);
if (laptop_mode) {
/*
* The disk must be active because we're syncing.
* We schedule log work now (now that the disk is
* active) instead of later (when it might not be).
*/
flush_delayed_work(&mp->m_log->l_work);
}
return 0;
}
STATIC int
xfs_fs_statfs(
struct dentry *dentry,
struct kstatfs *statp)
{
struct xfs_mount *mp = XFS_M(dentry->d_sb);
xfs_sb_t *sbp = &mp->m_sb;
struct xfs_inode *ip = XFS_I(d_inode(dentry));
uint64_t fakeinos, id;
uint64_t icount;
uint64_t ifree;
uint64_t fdblocks;
xfs_extlen_t lsize;
int64_t ffree;
statp->f_type = XFS_SUPER_MAGIC;
statp->f_namelen = MAXNAMELEN - 1;
id = huge_encode_dev(mp->m_ddev_targp->bt_dev);
statp->f_fsid.val[0] = (u32)id;
statp->f_fsid.val[1] = (u32)(id >> 32);
icount = percpu_counter_sum(&mp->m_icount);
ifree = percpu_counter_sum(&mp->m_ifree);
fdblocks = percpu_counter_sum(&mp->m_fdblocks);
spin_lock(&mp->m_sb_lock);
statp->f_bsize = sbp->sb_blocksize;
lsize = sbp->sb_logstart ? sbp->sb_logblocks : 0;
statp->f_blocks = sbp->sb_dblocks - lsize;
spin_unlock(&mp->m_sb_lock);
statp->f_bfree = fdblocks - mp->m_alloc_set_aside;
statp->f_bavail = statp->f_bfree;
fakeinos = XFS_FSB_TO_INO(mp, statp->f_bfree);
statp->f_files = min(icount + fakeinos, (uint64_t)XFS_MAXINUMBER);
if (M_IGEO(mp)->maxicount)
statp->f_files = min_t(typeof(statp->f_files),
statp->f_files,
M_IGEO(mp)->maxicount);
/* If sb_icount overshot maxicount, report actual allocation */
statp->f_files = max_t(typeof(statp->f_files),
statp->f_files,
sbp->sb_icount);
/* make sure statp->f_ffree does not underflow */
ffree = statp->f_files - (icount - ifree);
statp->f_ffree = max_t(int64_t, ffree, 0);
if ((ip->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) &&
((mp->m_qflags & (XFS_PQUOTA_ACCT|XFS_PQUOTA_ENFD))) ==
(XFS_PQUOTA_ACCT|XFS_PQUOTA_ENFD))
xfs_qm_statvfs(ip, statp);
if (XFS_IS_REALTIME_MOUNT(mp) &&
(ip->i_d.di_flags & (XFS_DIFLAG_RTINHERIT | XFS_DIFLAG_REALTIME))) {
statp->f_blocks = sbp->sb_rblocks;
statp->f_bavail = statp->f_bfree =
sbp->sb_frextents * sbp->sb_rextsize;
}
return 0;
}
STATIC void
xfs_save_resvblks(struct xfs_mount *mp)
{
uint64_t resblks = 0;
mp->m_resblks_save = mp->m_resblks;
xfs_reserve_blocks(mp, &resblks, NULL);
}
STATIC void
xfs_restore_resvblks(struct xfs_mount *mp)
{
uint64_t resblks;
if (mp->m_resblks_save) {
resblks = mp->m_resblks_save;
mp->m_resblks_save = 0;
} else
resblks = xfs_default_resblks(mp);
xfs_reserve_blocks(mp, &resblks, NULL);
}
/*
* Trigger writeback of all the dirty metadata in the file system.
*
* This ensures that the metadata is written to their location on disk rather
* than just existing in transactions in the log. This means after a quiesce
* there is no log replay required to write the inodes to disk - this is the
* primary difference between a sync and a quiesce.
*
* Note: xfs_log_quiesce() stops background log work - the callers must ensure
* it is started again when appropriate.
*/
void
xfs_quiesce_attr(
struct xfs_mount *mp)
{
int error = 0;
/* wait for all modifications to complete */
while (atomic_read(&mp->m_active_trans) > 0)
delay(100);
/* force the log to unpin objects from the now complete transactions */
xfs_log_force(mp, XFS_LOG_SYNC);
/* reclaim inodes to do any IO before the freeze completes */
xfs_reclaim_inodes(mp, 0);
xfs_reclaim_inodes(mp, SYNC_WAIT);
/* Push the superblock and write an unmount record */
error = xfs_log_sbcount(mp);
if (error)
xfs_warn(mp, "xfs_attr_quiesce: failed to log sb changes. "
"Frozen image may not be consistent.");
/*
* Just warn here till VFS can correctly support
* read-only remount without racing.
*/
WARN_ON(atomic_read(&mp->m_active_trans) != 0);
xfs_log_quiesce(mp);
}
/*
* Second stage of a freeze. The data is already frozen so we only
* need to take care of the metadata. Once that's done sync the superblock
* to the log to dirty it in case of a crash while frozen. This ensures that we
* will recover the unlinked inode lists on the next mount.
*/
STATIC int
xfs_fs_freeze(
struct super_block *sb)
{
struct xfs_mount *mp = XFS_M(sb);
xfs_stop_block_reaping(mp);
xfs_save_resvblks(mp);
xfs_quiesce_attr(mp);
return xfs_sync_sb(mp, true);
}
STATIC int
xfs_fs_unfreeze(
struct super_block *sb)
{
struct xfs_mount *mp = XFS_M(sb);
xfs_restore_resvblks(mp);
xfs_log_work_queue(mp);
xfs_start_block_reaping(mp);
return 0;
}
/*
* This function fills in xfs_mount_t fields based on mount args.
* Note: the superblock _has_ now been read in.
*/
STATIC int
xfs_finish_flags(
struct xfs_mount *mp)
{
int ronly = (mp->m_flags & XFS_MOUNT_RDONLY);
/* Fail a mount where the logbuf is smaller than the log stripe */
if (xfs_sb_version_haslogv2(&mp->m_sb)) {
if (mp->m_logbsize <= 0 &&
mp->m_sb.sb_logsunit > XLOG_BIG_RECORD_BSIZE) {
mp->m_logbsize = mp->m_sb.sb_logsunit;
} else if (mp->m_logbsize > 0 &&
mp->m_logbsize < mp->m_sb.sb_logsunit) {
xfs_warn(mp,
"logbuf size must be greater than or equal to log stripe size");
return -EINVAL;
}
} else {
/* Fail a mount if the logbuf is larger than 32K */
if (mp->m_logbsize > XLOG_BIG_RECORD_BSIZE) {
xfs_warn(mp,
"logbuf size for version 1 logs must be 16K or 32K");
return -EINVAL;
}
}
/*
* V5 filesystems always use attr2 format for attributes.
*/
if (xfs_sb_version_hascrc(&mp->m_sb) &&
(mp->m_flags & XFS_MOUNT_NOATTR2)) {
xfs_warn(mp, "Cannot mount a V5 filesystem as noattr2. "
"attr2 is always enabled for V5 filesystems.");
return -EINVAL;
}
/*
* mkfs'ed attr2 will turn on attr2 mount unless explicitly
* told by noattr2 to turn it off
*/
if (xfs_sb_version_hasattr2(&mp->m_sb) &&
!(mp->m_flags & XFS_MOUNT_NOATTR2))
mp->m_flags |= XFS_MOUNT_ATTR2;
/*
* prohibit r/w mounts of read-only filesystems
*/
if ((mp->m_sb.sb_flags & XFS_SBF_READONLY) && !ronly) {
xfs_warn(mp,
"cannot mount a read-only filesystem as read-write");
return -EROFS;
}
if ((mp->m_qflags & (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE)) &&
(mp->m_qflags & (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE)) &&
!xfs_sb_version_has_pquotino(&mp->m_sb)) {
xfs_warn(mp,
"Super block does not support project and group quota together");
return -EINVAL;
}
return 0;
}
static int
xfs_init_percpu_counters(
struct xfs_mount *mp)
{
int error;
error = percpu_counter_init(&mp->m_icount, 0, GFP_KERNEL);
if (error)
return -ENOMEM;
error = percpu_counter_init(&mp->m_ifree, 0, GFP_KERNEL);
if (error)
goto free_icount;
error = percpu_counter_init(&mp->m_fdblocks, 0, GFP_KERNEL);
if (error)
goto free_ifree;
error = percpu_counter_init(&mp->m_delalloc_blks, 0, GFP_KERNEL);
if (error)
goto free_fdblocks;
return 0;
free_fdblocks:
percpu_counter_destroy(&mp->m_fdblocks);
free_ifree:
percpu_counter_destroy(&mp->m_ifree);
free_icount:
percpu_counter_destroy(&mp->m_icount);
return -ENOMEM;
}
void
xfs_reinit_percpu_counters(
struct xfs_mount *mp)
{
percpu_counter_set(&mp->m_icount, mp->m_sb.sb_icount);
percpu_counter_set(&mp->m_ifree, mp->m_sb.sb_ifree);
percpu_counter_set(&mp->m_fdblocks, mp->m_sb.sb_fdblocks);
}
static void
xfs_destroy_percpu_counters(
struct xfs_mount *mp)
{
percpu_counter_destroy(&mp->m_icount);
percpu_counter_destroy(&mp->m_ifree);
percpu_counter_destroy(&mp->m_fdblocks);
ASSERT(XFS_FORCED_SHUTDOWN(mp) ||
percpu_counter_sum(&mp->m_delalloc_blks) == 0);
percpu_counter_destroy(&mp->m_delalloc_blks);
}
static void
xfs_fs_put_super(
struct super_block *sb)
{
struct xfs_mount *mp = XFS_M(sb);
/* if ->fill_super failed, we have no mount to tear down */
if (!sb->s_fs_info)
return;
xfs_notice(mp, "Unmounting Filesystem");
xfs_filestream_unmount(mp);
xfs_unmountfs(mp);
xfs_freesb(mp);
free_percpu(mp->m_stats.xs_stats);
xfs_destroy_percpu_counters(mp);
xfs_destroy_mount_workqueues(mp);
xfs_close_devices(mp);
sb->s_fs_info = NULL;
xfs_mount_free(mp);
}
static long
xfs_fs_nr_cached_objects(
struct super_block *sb,
struct shrink_control *sc)
{
/* Paranoia: catch incorrect calls during mount setup or teardown */
if (WARN_ON_ONCE(!sb->s_fs_info))
return 0;
return xfs_reclaim_inodes_count(XFS_M(sb));
}
static long
xfs_fs_free_cached_objects(
struct super_block *sb,
struct shrink_control *sc)
{
return xfs_reclaim_inodes_nr(XFS_M(sb), sc->nr_to_scan);
}
static const struct super_operations xfs_super_operations = {
.alloc_inode = xfs_fs_alloc_inode,
.destroy_inode = xfs_fs_destroy_inode,
.dirty_inode = xfs_fs_dirty_inode,
.drop_inode = xfs_fs_drop_inode,
.put_super = xfs_fs_put_super,
.sync_fs = xfs_fs_sync_fs,
.freeze_fs = xfs_fs_freeze,
.unfreeze_fs = xfs_fs_unfreeze,
.statfs = xfs_fs_statfs,
.show_options = xfs_fs_show_options,
.nr_cached_objects = xfs_fs_nr_cached_objects,
.free_cached_objects = xfs_fs_free_cached_objects,
};
static int
suffix_kstrtoint(
const char *s,
unsigned int base,
int *res)
{
int last, shift_left_factor = 0, _res;
char *value;
int ret = 0;
value = kstrdup(s, GFP_KERNEL);
if (!value)
return -ENOMEM;
last = strlen(value) - 1;
if (value[last] == 'K' || value[last] == 'k') {
shift_left_factor = 10;
value[last] = '\0';
}
if (value[last] == 'M' || value[last] == 'm') {
shift_left_factor = 20;
value[last] = '\0';
}
if (value[last] == 'G' || value[last] == 'g') {
shift_left_factor = 30;
value[last] = '\0';
}
if (kstrtoint(value, base, &_res))
ret = -EINVAL;
kfree(value);
*res = _res << shift_left_factor;
return ret;
}
/*
* Set mount state from a mount option.
*
* NOTE: mp->m_super is NULL here!
*/
static int
xfs_fc_parse_param(
struct fs_context *fc,
struct fs_parameter *param)
{
struct xfs_mount *mp = fc->s_fs_info;
struct fs_parse_result result;
int size = 0;
int opt;
opt = fs_parse(fc, &xfs_fs_parameters, param, &result);
if (opt < 0)
return opt;
switch (opt) {
case Opt_logbufs:
mp->m_logbufs = result.uint_32;
return 0;
case Opt_logbsize:
if (suffix_kstrtoint(param->string, 10, &mp->m_logbsize))
return -EINVAL;
return 0;
case Opt_logdev:
kfree(mp->m_logname);
mp->m_logname = kstrdup(param->string, GFP_KERNEL);
if (!mp->m_logname)
return -ENOMEM;
return 0;
case Opt_rtdev:
kfree(mp->m_rtname);
mp->m_rtname = kstrdup(param->string, GFP_KERNEL);
if (!mp->m_rtname)
return -ENOMEM;
return 0;
case Opt_allocsize:
if (suffix_kstrtoint(param->string, 10, &size))
return -EINVAL;
mp->m_allocsize_log = ffs(size) - 1;
mp->m_flags |= XFS_MOUNT_ALLOCSIZE;
return 0;
case Opt_grpid:
case Opt_bsdgroups:
mp->m_flags |= XFS_MOUNT_GRPID;
return 0;
case Opt_nogrpid:
case Opt_sysvgroups:
mp->m_flags &= ~XFS_MOUNT_GRPID;
return 0;
case Opt_wsync:
mp->m_flags |= XFS_MOUNT_WSYNC;
return 0;
case Opt_norecovery:
mp->m_flags |= XFS_MOUNT_NORECOVERY;
return 0;
case Opt_noalign:
mp->m_flags |= XFS_MOUNT_NOALIGN;
return 0;
case Opt_swalloc:
mp->m_flags |= XFS_MOUNT_SWALLOC;
return 0;
case Opt_sunit:
mp->m_dalign = result.uint_32;
return 0;
case Opt_swidth:
mp->m_swidth = result.uint_32;
return 0;
case Opt_inode32:
mp->m_flags |= XFS_MOUNT_SMALL_INUMS;
return 0;
case Opt_inode64:
mp->m_flags &= ~XFS_MOUNT_SMALL_INUMS;
return 0;
case Opt_nouuid:
mp->m_flags |= XFS_MOUNT_NOUUID;
return 0;
case Opt_ikeep:
mp->m_flags |= XFS_MOUNT_IKEEP;
return 0;
case Opt_noikeep:
mp->m_flags &= ~XFS_MOUNT_IKEEP;
return 0;
case Opt_largeio:
mp->m_flags |= XFS_MOUNT_LARGEIO;
return 0;
case Opt_nolargeio:
mp->m_flags &= ~XFS_MOUNT_LARGEIO;
return 0;
case Opt_attr2:
mp->m_flags |= XFS_MOUNT_ATTR2;
return 0;
case Opt_noattr2:
mp->m_flags &= ~XFS_MOUNT_ATTR2;
mp->m_flags |= XFS_MOUNT_NOATTR2;
return 0;
case Opt_filestreams:
mp->m_flags |= XFS_MOUNT_FILESTREAMS;
return 0;
case Opt_noquota:
mp->m_qflags &= ~XFS_ALL_QUOTA_ACCT;
mp->m_qflags &= ~XFS_ALL_QUOTA_ENFD;
mp->m_qflags &= ~XFS_ALL_QUOTA_ACTIVE;
return 0;
case Opt_quota:
case Opt_uquota:
case Opt_usrquota:
mp->m_qflags |= (XFS_UQUOTA_ACCT | XFS_UQUOTA_ACTIVE |
XFS_UQUOTA_ENFD);
return 0;
case Opt_qnoenforce:
case Opt_uqnoenforce:
mp->m_qflags |= (XFS_UQUOTA_ACCT | XFS_UQUOTA_ACTIVE);
mp->m_qflags &= ~XFS_UQUOTA_ENFD;
return 0;
case Opt_pquota:
case Opt_prjquota:
mp->m_qflags |= (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE |
XFS_PQUOTA_ENFD);
return 0;
case Opt_pqnoenforce:
mp->m_qflags |= (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE);
mp->m_qflags &= ~XFS_PQUOTA_ENFD;
return 0;
case Opt_gquota:
case Opt_grpquota:
mp->m_qflags |= (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE |
XFS_GQUOTA_ENFD);
return 0;
case Opt_gqnoenforce:
mp->m_qflags |= (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE);
mp->m_qflags &= ~XFS_GQUOTA_ENFD;
return 0;
case Opt_discard:
mp->m_flags |= XFS_MOUNT_DISCARD;
return 0;
case Opt_nodiscard:
mp->m_flags &= ~XFS_MOUNT_DISCARD;
return 0;
#ifdef CONFIG_FS_DAX
case Opt_dax:
mp->m_flags |= XFS_MOUNT_DAX;
return 0;
#endif
default:
xfs_warn(mp, "unknown mount option [%s].", param->key);
return -EINVAL;
}
return 0;
}
static int
xfs_fc_validate_params(
struct xfs_mount *mp)
{
/*
* no recovery flag requires a read-only mount
*/
if ((mp->m_flags & XFS_MOUNT_NORECOVERY) &&
!(mp->m_flags & XFS_MOUNT_RDONLY)) {
xfs_warn(mp, "no-recovery mounts must be read-only.");
return -EINVAL;
}
if ((mp->m_flags & XFS_MOUNT_NOALIGN) &&
(mp->m_dalign || mp->m_swidth)) {
xfs_warn(mp,
"sunit and swidth options incompatible with the noalign option");
return -EINVAL;
}
if (!IS_ENABLED(CONFIG_XFS_QUOTA) && mp->m_qflags != 0) {
xfs_warn(mp, "quota support not available in this kernel.");
return -EINVAL;
}
if ((mp->m_dalign && !mp->m_swidth) ||
(!mp->m_dalign && mp->m_swidth)) {
xfs_warn(mp, "sunit and swidth must be specified together");
return -EINVAL;
}
if (mp->m_dalign && (mp->m_swidth % mp->m_dalign != 0)) {
xfs_warn(mp,
"stripe width (%d) must be a multiple of the stripe unit (%d)",
mp->m_swidth, mp->m_dalign);
return -EINVAL;
}
if (mp->m_logbufs != -1 &&
mp->m_logbufs != 0 &&
(mp->m_logbufs < XLOG_MIN_ICLOGS ||
mp->m_logbufs > XLOG_MAX_ICLOGS)) {
xfs_warn(mp, "invalid logbufs value: %d [not %d-%d]",
mp->m_logbufs, XLOG_MIN_ICLOGS, XLOG_MAX_ICLOGS);
return -EINVAL;
}
if (mp->m_logbsize != -1 &&
mp->m_logbsize != 0 &&
(mp->m_logbsize < XLOG_MIN_RECORD_BSIZE ||
mp->m_logbsize > XLOG_MAX_RECORD_BSIZE ||
!is_power_of_2(mp->m_logbsize))) {
xfs_warn(mp,
"invalid logbufsize: %d [not 16k,32k,64k,128k or 256k]",
mp->m_logbsize);
return -EINVAL;
}
if ((mp->m_flags & XFS_MOUNT_ALLOCSIZE) &&
(mp->m_allocsize_log > XFS_MAX_IO_LOG ||
mp->m_allocsize_log < XFS_MIN_IO_LOG)) {
xfs_warn(mp, "invalid log iosize: %d [not %d-%d]",
mp->m_allocsize_log, XFS_MIN_IO_LOG, XFS_MAX_IO_LOG);
return -EINVAL;
}
return 0;
}
static int
xfs_fc_fill_super(
struct super_block *sb,
struct fs_context *fc)
{
struct xfs_mount *mp = sb->s_fs_info;
struct inode *root;
int flags = 0, error;
mp->m_super = sb;
error = xfs_fc_validate_params(mp);
if (error)
goto out_free_names;
sb_min_blocksize(sb, BBSIZE);
sb->s_xattr = xfs_xattr_handlers;
sb->s_export_op = &xfs_export_operations;
#ifdef CONFIG_XFS_QUOTA
sb->s_qcop = &xfs_quotactl_operations;
sb->s_quota_types = QTYPE_MASK_USR | QTYPE_MASK_GRP | QTYPE_MASK_PRJ;
#endif
sb->s_op = &xfs_super_operations;
xfs: add mount delay debug option Similar to log_recovery_delay, this delay occurs between the VFS superblock being initialised and the xfs_mount being fully initialised. It also poisons the per-ag radix tree node so that it can be used for triggering shrinker races during mount such as the following: <run memory pressure workload in background> $ cat dirty-mount.sh #! /bin/bash umount -f /dev/pmem0 mkfs.xfs -f /dev/pmem0 mount /dev/pmem0 /mnt/test rm -f /mnt/test/foo xfs_io -fxc "pwrite 0 4k" -c fsync -c "shutdown" /mnt/test/foo umount /dev/pmem0 # let's crash it now! echo 30 > /sys/fs/xfs/debug/mount_delay mount /dev/pmem0 /mnt/test echo 0 > /sys/fs/xfs/debug/mount_delay umount /dev/pmem0 $ sudo ./dirty-mount.sh ..... [ 60.378118] CPU: 3 PID: 3577 Comm: fs_mark Tainted: G D W 4.16.0-rc5-dgc #440 [ 60.378120] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 60.378124] RIP: 0010:radix_tree_next_chunk+0x76/0x320 [ 60.378127] RSP: 0018:ffffc9000276f4f8 EFLAGS: 00010282 [ 60.383670] RAX: a5a5a5a5a5a5a5a4 RBX: 0000000000000010 RCX: 000000000000001a [ 60.385277] RDX: 0000000000000000 RSI: ffffc9000276f540 RDI: 0000000000000000 [ 60.386554] RBP: 0000000000000000 R08: 0000000000000000 R09: a5a5a5a5a5a5a5a5 [ 60.388194] R10: 0000000000000006 R11: 0000000000000001 R12: ffffc9000276f598 [ 60.389288] R13: 0000000000000040 R14: 0000000000000228 R15: ffff880816cd6458 [ 60.390827] FS: 00007f5c124b9740(0000) GS:ffff88083fc00000(0000) knlGS:0000000000000000 [ 60.392253] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 60.393423] CR2: 00007f5c11bba0b8 CR3: 000000035580e001 CR4: 00000000000606e0 [ 60.394519] Call Trace: [ 60.395252] radix_tree_gang_lookup_tag+0xc4/0x130 [ 60.395948] xfs_perag_get_tag+0x37/0xf0 [ 60.396522] xfs_reclaim_inodes_count+0x32/0x40 [ 60.397178] xfs_fs_nr_cached_objects+0x11/0x20 [ 60.397837] super_cache_count+0x35/0xc0 [ 60.399159] shrink_slab.part.66+0xb1/0x370 [ 60.400194] shrink_node+0x7e/0x1a0 [ 60.401058] try_to_free_pages+0x199/0x470 [ 60.402081] __alloc_pages_slowpath+0x3a1/0xd20 [ 60.403729] __alloc_pages_nodemask+0x1c3/0x200 [ 60.404941] cache_grow_begin+0x20b/0x2e0 [ 60.406164] fallback_alloc+0x160/0x200 [ 60.407088] kmem_cache_alloc+0x111/0x4e0 [ 60.408038] ? xfs_buf_rele+0x61/0x430 [ 60.408925] kmem_zone_alloc+0x61/0xe0 [ 60.409965] xfs_inode_alloc+0x24/0x1d0 ..... Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-11 12:50:23 +08:00
/*
* Delay mount work if the debug hook is set. This is debug
* instrumention to coordinate simulation of xfs mount failures with
* VFS superblock operations
*/
if (xfs_globals.mount_delay) {
xfs_notice(mp, "Delaying mount for %d seconds.",
xfs_globals.mount_delay);
msleep(xfs_globals.mount_delay * 1000);
}
if (fc->sb_flags & SB_SILENT)
flags |= XFS_MFSI_QUIET;
error = xfs_open_devices(mp);
if (error)
goto out_free_names;
error = xfs_init_mount_workqueues(mp);
if (error)
goto out_close_devices;
error = xfs_init_percpu_counters(mp);
if (error)
goto out_destroy_workqueues;
/* Allocate stats memory before we do operations that might use it */
mp->m_stats.xs_stats = alloc_percpu(struct xfsstats);
if (!mp->m_stats.xs_stats) {
error = -ENOMEM;
goto out_destroy_counters;
}
error = xfs_readsb(mp, flags);
if (error)
goto out_free_stats;
error = xfs_finish_flags(mp);
if (error)
goto out_free_sb;
error = xfs_setup_devices(mp);
if (error)
goto out_free_sb;
/*
* XFS block mappings use 54 bits to store the logical block offset.
* This should suffice to handle the maximum file size that the VFS
* supports (currently 2^63 bytes on 64-bit and ULONG_MAX << PAGE_SHIFT
* bytes on 32-bit), but as XFS and VFS have gotten the s_maxbytes
* calculation wrong on 32-bit kernels in the past, we'll add a WARN_ON
* to check this assertion.
*
* Avoid integer overflow by comparing the maximum bmbt offset to the
* maximum pagecache offset in units of fs blocks.
*/
if (XFS_B_TO_FSBT(mp, MAX_LFS_FILESIZE) > XFS_MAX_FILEOFF) {
xfs_warn(mp,
"MAX_LFS_FILESIZE block offset (%llu) exceeds extent map maximum (%llu)!",
XFS_B_TO_FSBT(mp, MAX_LFS_FILESIZE),
XFS_MAX_FILEOFF);
error = -EINVAL;
goto out_free_sb;
}
error = xfs_filestream_mount(mp);
if (error)
goto out_free_sb;
/*
* we must configure the block size in the superblock before we run the
* full mount process as the mount process can lookup and cache inodes.
*/
sb->s_magic = XFS_SUPER_MAGIC;
sb->s_blocksize = mp->m_sb.sb_blocksize;
sb->s_blocksize_bits = ffs(sb->s_blocksize) - 1;
sb->s_maxbytes = MAX_LFS_FILESIZE;
sb->s_max_links = XFS_MAXLINK;
sb->s_time_gran = 1;
sb->s_time_min = S32_MIN;
sb->s_time_max = S32_MAX;
sb->s_iflags |= SB_I_CGROUPWB;
set_posix_acl_flag(sb);
/* version 5 superblocks support inode version counters. */
if (XFS_SB_VERSION_NUM(&mp->m_sb) == XFS_SB_VERSION_5)
sb->s_flags |= SB_I_VERSION;
if (mp->m_flags & XFS_MOUNT_DAX) {
bool rtdev_is_dax = false, datadev_is_dax;
xfs_warn(mp,
"DAX enabled. Warning: EXPERIMENTAL, use at your own risk");
datadev_is_dax = bdev_dax_supported(mp->m_ddev_targp->bt_bdev,
sb->s_blocksize);
if (mp->m_rtdev_targp)
rtdev_is_dax = bdev_dax_supported(
mp->m_rtdev_targp->bt_bdev, sb->s_blocksize);
if (!rtdev_is_dax && !datadev_is_dax) {
xfs_alert(mp,
"DAX unsupported by block device. Turning off DAX.");
mp->m_flags &= ~XFS_MOUNT_DAX;
}
if (xfs_sb_version_hasreflink(&mp->m_sb)) {
xfs_alert(mp,
"DAX and reflink cannot be used together!");
error = -EINVAL;
goto out_filestream_unmount;
}
}
if (mp->m_flags & XFS_MOUNT_DISCARD) {
struct request_queue *q = bdev_get_queue(sb->s_bdev);
if (!blk_queue_discard(q)) {
xfs_warn(mp, "mounting with \"discard\" option, but "
"the device does not support discard");
mp->m_flags &= ~XFS_MOUNT_DISCARD;
}
}
xfs: introduce an always_cow mode Add a mode where XFS never overwrites existing blocks in place. This is to aid debugging our COW code, and also put infatructure in place for things like possible future support for zoned block devices, which can't support overwrites. This mode is enabled globally by doing a: echo 1 > /sys/fs/xfs/debug/always_cow Note that the parameter is global to allow running all tests in xfstests easily in this mode, which would not easily be possible with a per-fs sysfs file. In always_cow mode persistent preallocations are disabled, and fallocate will fail when called with a 0 mode (with our without FALLOC_FL_KEEP_SIZE), and not create unwritten extent for zeroed space when called with FALLOC_FL_ZERO_RANGE or FALLOC_FL_UNSHARE_RANGE. There are a few interesting xfstests failures when run in always_cow mode: - generic/392 fails because the bytes used in the file used to test hole punch recovery are less after the log replay. This is because the blocks written and then punched out are only freed with a delay due to the logging mechanism. - xfs/170 will fail as the already fragile file streams mechanism doesn't seem to interact well with the COW allocator - xfs/180 xfs/182 xfs/192 xfs/198 xfs/204 and xfs/208 will claim the file system is badly fragmented, but there is not much we can do to avoid that when always writing out of place - xfs/205 fails because overwriting a file in always_cow mode will require new space allocation and the assumption in the test thus don't work anymore. - xfs/326 fails to modify the file at all in always_cow mode after injecting the refcount error, leading to an unexpected md5sum after the remount, but that again is expected Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-19 01:38:49 +08:00
if (xfs_sb_version_hasreflink(&mp->m_sb)) {
if (mp->m_sb.sb_rblocks) {
xfs_alert(mp,
"reflink not compatible with realtime device!");
xfs: introduce an always_cow mode Add a mode where XFS never overwrites existing blocks in place. This is to aid debugging our COW code, and also put infatructure in place for things like possible future support for zoned block devices, which can't support overwrites. This mode is enabled globally by doing a: echo 1 > /sys/fs/xfs/debug/always_cow Note that the parameter is global to allow running all tests in xfstests easily in this mode, which would not easily be possible with a per-fs sysfs file. In always_cow mode persistent preallocations are disabled, and fallocate will fail when called with a 0 mode (with our without FALLOC_FL_KEEP_SIZE), and not create unwritten extent for zeroed space when called with FALLOC_FL_ZERO_RANGE or FALLOC_FL_UNSHARE_RANGE. There are a few interesting xfstests failures when run in always_cow mode: - generic/392 fails because the bytes used in the file used to test hole punch recovery are less after the log replay. This is because the blocks written and then punched out are only freed with a delay due to the logging mechanism. - xfs/170 will fail as the already fragile file streams mechanism doesn't seem to interact well with the COW allocator - xfs/180 xfs/182 xfs/192 xfs/198 xfs/204 and xfs/208 will claim the file system is badly fragmented, but there is not much we can do to avoid that when always writing out of place - xfs/205 fails because overwriting a file in always_cow mode will require new space allocation and the assumption in the test thus don't work anymore. - xfs/326 fails to modify the file at all in always_cow mode after injecting the refcount error, leading to an unexpected md5sum after the remount, but that again is expected Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-19 01:38:49 +08:00
error = -EINVAL;
goto out_filestream_unmount;
}
if (xfs_globals.always_cow) {
xfs_info(mp, "using DEBUG-only always_cow mode.");
mp->m_always_cow = true;
}
}
if (xfs_sb_version_hasrmapbt(&mp->m_sb) && mp->m_sb.sb_rblocks) {
xfs_alert(mp,
"reverse mapping btree not compatible with realtime device!");
error = -EINVAL;
goto out_filestream_unmount;
}
error = xfs_mountfs(mp);
if (error)
goto out_filestream_unmount;
root = igrab(VFS_I(mp->m_rootip));
if (!root) {
error = -ENOENT;
goto out_unmount;
}
sb->s_root = d_make_root(root);
if (!sb->s_root) {
error = -ENOMEM;
goto out_unmount;
}
return 0;
out_filestream_unmount:
xfs_filestream_unmount(mp);
out_free_sb:
xfs_freesb(mp);
out_free_stats:
free_percpu(mp->m_stats.xs_stats);
out_destroy_counters:
xfs_destroy_percpu_counters(mp);
out_destroy_workqueues:
xfs_destroy_mount_workqueues(mp);
out_close_devices:
xfs_close_devices(mp);
out_free_names:
sb->s_fs_info = NULL;
xfs_mount_free(mp);
return error;
out_unmount:
xfs_filestream_unmount(mp);
xfs_unmountfs(mp);
goto out_free_sb;
}
static int
xfs_fc_get_tree(
struct fs_context *fc)
{
return get_tree_bdev(fc, xfs_fc_fill_super);
}
static int
xfs_remount_rw(
struct xfs_mount *mp)
{
struct xfs_sb *sbp = &mp->m_sb;
int error;
if (mp->m_flags & XFS_MOUNT_NORECOVERY) {
xfs_warn(mp,
"ro->rw transition prohibited on norecovery mount");
return -EINVAL;
}
if (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_5 &&
xfs_sb_has_ro_compat_feature(sbp, XFS_SB_FEAT_RO_COMPAT_UNKNOWN)) {
xfs_warn(mp,
"ro->rw transition prohibited on unknown (0x%x) ro-compat filesystem",
(sbp->sb_features_ro_compat &
XFS_SB_FEAT_RO_COMPAT_UNKNOWN));
return -EINVAL;
}
mp->m_flags &= ~XFS_MOUNT_RDONLY;
/*
* If this is the first remount to writeable state we might have some
* superblock changes to update.
*/
if (mp->m_update_sb) {
error = xfs_sync_sb(mp, false);
if (error) {
xfs_warn(mp, "failed to write sb changes");
return error;
}
mp->m_update_sb = false;
}
/*
* Fill out the reserve pool if it is empty. Use the stashed value if
* it is non-zero, otherwise go with the default.
*/
xfs_restore_resvblks(mp);
xfs_log_work_queue(mp);
/* Recover any CoW blocks that never got remapped. */
error = xfs_reflink_recover_cow(mp);
if (error) {
xfs_err(mp,
"Error %d recovering leftover CoW allocations.", error);
xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
return error;
}
xfs_start_block_reaping(mp);
/* Create the per-AG metadata reservation pool .*/
error = xfs_fs_reserve_ag_blocks(mp);
if (error && error != -ENOSPC)
return error;
return 0;
}
static int
xfs_remount_ro(
struct xfs_mount *mp)
{
int error;
/*
* Cancel background eofb scanning so it cannot race with the final
* log force+buftarg wait and deadlock the remount.
*/
xfs_stop_block_reaping(mp);
/* Get rid of any leftover CoW reservations... */
error = xfs_icache_free_cowblocks(mp, NULL);
if (error) {
xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
return error;
}
/* Free the per-AG metadata reservation pool. */
error = xfs_fs_unreserve_ag_blocks(mp);
if (error) {
xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
return error;
}
/*
* Before we sync the metadata, we need to free up the reserve block
* pool so that the used block count in the superblock on disk is
* correct at the end of the remount. Stash the current* reserve pool
* size so that if we get remounted rw, we can return it to the same
* size.
*/
xfs_save_resvblks(mp);
xfs_quiesce_attr(mp);
mp->m_flags |= XFS_MOUNT_RDONLY;
return 0;
}
/*
* Logically we would return an error here to prevent users from believing
* they might have changed mount options using remount which can't be changed.
*
* But unfortunately mount(8) adds all options from mtab and fstab to the mount
* arguments in some cases so we can't blindly reject options, but have to
* check for each specified option if it actually differs from the currently
* set option and only reject it if that's the case.
*
* Until that is implemented we return success for every remount request, and
* silently ignore all options that we can't actually change.
*/
static int
xfs_fc_reconfigure(
struct fs_context *fc)
{
struct xfs_mount *mp = XFS_M(fc->root->d_sb);
struct xfs_mount *new_mp = fc->s_fs_info;
xfs_sb_t *sbp = &mp->m_sb;
int flags = fc->sb_flags;
int error;
error = xfs_fc_validate_params(new_mp);
if (error)
return error;
sync_filesystem(mp->m_super);
/* inode32 -> inode64 */
if ((mp->m_flags & XFS_MOUNT_SMALL_INUMS) &&
!(new_mp->m_flags & XFS_MOUNT_SMALL_INUMS)) {
mp->m_flags &= ~XFS_MOUNT_SMALL_INUMS;
mp->m_maxagi = xfs_set_inode_alloc(mp, sbp->sb_agcount);
}
/* inode64 -> inode32 */
if (!(mp->m_flags & XFS_MOUNT_SMALL_INUMS) &&
(new_mp->m_flags & XFS_MOUNT_SMALL_INUMS)) {
mp->m_flags |= XFS_MOUNT_SMALL_INUMS;
mp->m_maxagi = xfs_set_inode_alloc(mp, sbp->sb_agcount);
}
/* ro -> rw */
if ((mp->m_flags & XFS_MOUNT_RDONLY) && !(flags & SB_RDONLY)) {
error = xfs_remount_rw(mp);
if (error)
return error;
}
/* rw -> ro */
if (!(mp->m_flags & XFS_MOUNT_RDONLY) && (flags & SB_RDONLY)) {
error = xfs_remount_ro(mp);
if (error)
return error;
}
return 0;
}
static void xfs_fc_free(
struct fs_context *fc)
{
struct xfs_mount *mp = fc->s_fs_info;
/*
* mp is stored in the fs_context when it is initialized.
* mp is transferred to the superblock on a successful mount,
* but if an error occurs before the transfer we have to free
* it here.
*/
if (mp)
xfs_mount_free(mp);
}
static const struct fs_context_operations xfs_context_ops = {
.parse_param = xfs_fc_parse_param,
.get_tree = xfs_fc_get_tree,
.reconfigure = xfs_fc_reconfigure,
.free = xfs_fc_free,
};
static int xfs_init_fs_context(
struct fs_context *fc)
{
struct xfs_mount *mp;
mp = kmem_alloc(sizeof(struct xfs_mount), KM_ZERO);
if (!mp)
return -ENOMEM;
spin_lock_init(&mp->m_sb_lock);
spin_lock_init(&mp->m_agirotor_lock);
INIT_RADIX_TREE(&mp->m_perag_tree, GFP_ATOMIC);
spin_lock_init(&mp->m_perag_lock);
mutex_init(&mp->m_growlock);
atomic_set(&mp->m_active_trans, 0);
INIT_DELAYED_WORK(&mp->m_reclaim_work, xfs_reclaim_worker);
INIT_DELAYED_WORK(&mp->m_eofblocks_work, xfs_eofblocks_worker);
INIT_DELAYED_WORK(&mp->m_cowblocks_work, xfs_cowblocks_worker);
mp->m_kobj.kobject.kset = xfs_kset;
/*
* We don't create the finobt per-ag space reservation until after log
* recovery, so we must set this to true so that an ifree transaction
* started during log recovery will not depend on space reservations
* for finobt expansion.
*/
mp->m_finobt_nores = true;
/*
* These can be overridden by the mount option parsing.
*/
mp->m_logbufs = -1;
mp->m_logbsize = -1;
mp->m_allocsize_log = 16; /* 64k */
/*
* Copy binary VFS mount flags we are interested in.
*/
if (fc->sb_flags & SB_RDONLY)
mp->m_flags |= XFS_MOUNT_RDONLY;
if (fc->sb_flags & SB_DIRSYNC)
mp->m_flags |= XFS_MOUNT_DIRSYNC;
if (fc->sb_flags & SB_SYNCHRONOUS)
mp->m_flags |= XFS_MOUNT_WSYNC;
fc->s_fs_info = mp;
fc->ops = &xfs_context_ops;
return 0;
}
static struct file_system_type xfs_fs_type = {
.owner = THIS_MODULE,
.name = "xfs",
.init_fs_context = xfs_init_fs_context,
.parameters = &xfs_fs_parameters,
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV,
};
fs: Limit sys_mount to only request filesystem modules. Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-03 11:39:14 +08:00
MODULE_ALIAS_FS("xfs");
STATIC int __init
xfs_init_zones(void)
{
xfs_log_ticket_zone = kmem_cache_create("xfs_log_ticket",
sizeof(struct xlog_ticket),
0, 0, NULL);
if (!xfs_log_ticket_zone)
goto out;
xfs_bmap_free_item_zone = kmem_cache_create("xfs_bmap_free_item",
sizeof(struct xfs_extent_free_item),
0, 0, NULL);
if (!xfs_bmap_free_item_zone)
goto out_destroy_log_ticket_zone;
xfs_btree_cur_zone = kmem_cache_create("xfs_btree_cur",
sizeof(struct xfs_btree_cur),
0, 0, NULL);
if (!xfs_btree_cur_zone)
goto out_destroy_bmap_free_item_zone;
xfs_da_state_zone = kmem_cache_create("xfs_da_state",
sizeof(struct xfs_da_state),
0, 0, NULL);
if (!xfs_da_state_zone)
goto out_destroy_btree_cur_zone;
xfs_ifork_zone = kmem_cache_create("xfs_ifork",
sizeof(struct xfs_ifork),
0, 0, NULL);
if (!xfs_ifork_zone)
goto out_destroy_da_state_zone;
xfs_trans_zone = kmem_cache_create("xf_trans",
sizeof(struct xfs_trans),
0, 0, NULL);
if (!xfs_trans_zone)
goto out_destroy_ifork_zone;
/*
* The size of the zone allocated buf log item is the maximum
* size possible under XFS. This wastes a little bit of memory,
* but it is much faster.
*/
xfs_buf_item_zone = kmem_cache_create("xfs_buf_item",
sizeof(struct xfs_buf_log_item),
0, 0, NULL);
if (!xfs_buf_item_zone)
goto out_destroy_trans_zone;
xfs_efd_zone = kmem_cache_create("xfs_efd_item",
(sizeof(struct xfs_efd_log_item) +
(XFS_EFD_MAX_FAST_EXTENTS - 1) *
sizeof(struct xfs_extent)),
0, 0, NULL);
if (!xfs_efd_zone)
goto out_destroy_buf_item_zone;
xfs_efi_zone = kmem_cache_create("xfs_efi_item",
(sizeof(struct xfs_efi_log_item) +
(XFS_EFI_MAX_FAST_EXTENTS - 1) *
sizeof(struct xfs_extent)),
0, 0, NULL);
if (!xfs_efi_zone)
goto out_destroy_efd_zone;
xfs_inode_zone = kmem_cache_create("xfs_inode",
sizeof(struct xfs_inode), 0,
(SLAB_HWCACHE_ALIGN |
SLAB_RECLAIM_ACCOUNT |
SLAB_MEM_SPREAD | SLAB_ACCOUNT),
xfs_fs_inode_init_once);
if (!xfs_inode_zone)
goto out_destroy_efi_zone;
xfs_ili_zone = kmem_cache_create("xfs_ili",
sizeof(struct xfs_inode_log_item), 0,
SLAB_MEM_SPREAD, NULL);
if (!xfs_ili_zone)
goto out_destroy_inode_zone;
xfs_icreate_zone = kmem_cache_create("xfs_icr",
sizeof(struct xfs_icreate_item),
0, 0, NULL);
if (!xfs_icreate_zone)
goto out_destroy_ili_zone;
xfs_rud_zone = kmem_cache_create("xfs_rud_item",
sizeof(struct xfs_rud_log_item),
0, 0, NULL);
if (!xfs_rud_zone)
goto out_destroy_icreate_zone;
xfs_rui_zone = kmem_cache_create("xfs_rui_item",
xfs_rui_log_item_sizeof(XFS_RUI_MAX_FAST_EXTENTS),
0, 0, NULL);
if (!xfs_rui_zone)
goto out_destroy_rud_zone;
xfs_cud_zone = kmem_cache_create("xfs_cud_item",
sizeof(struct xfs_cud_log_item),
0, 0, NULL);
if (!xfs_cud_zone)
goto out_destroy_rui_zone;
xfs_cui_zone = kmem_cache_create("xfs_cui_item",
xfs_cui_log_item_sizeof(XFS_CUI_MAX_FAST_EXTENTS),
0, 0, NULL);
if (!xfs_cui_zone)
goto out_destroy_cud_zone;
xfs_bud_zone = kmem_cache_create("xfs_bud_item",
sizeof(struct xfs_bud_log_item),
0, 0, NULL);
if (!xfs_bud_zone)
goto out_destroy_cui_zone;
xfs_bui_zone = kmem_cache_create("xfs_bui_item",
xfs_bui_log_item_sizeof(XFS_BUI_MAX_FAST_EXTENTS),
0, 0, NULL);
if (!xfs_bui_zone)
goto out_destroy_bud_zone;
return 0;
out_destroy_bud_zone:
kmem_cache_destroy(xfs_bud_zone);
out_destroy_cui_zone:
kmem_cache_destroy(xfs_cui_zone);
out_destroy_cud_zone:
kmem_cache_destroy(xfs_cud_zone);
out_destroy_rui_zone:
kmem_cache_destroy(xfs_rui_zone);
out_destroy_rud_zone:
kmem_cache_destroy(xfs_rud_zone);
out_destroy_icreate_zone:
kmem_cache_destroy(xfs_icreate_zone);
out_destroy_ili_zone:
kmem_cache_destroy(xfs_ili_zone);
out_destroy_inode_zone:
kmem_cache_destroy(xfs_inode_zone);
out_destroy_efi_zone:
kmem_cache_destroy(xfs_efi_zone);
out_destroy_efd_zone:
kmem_cache_destroy(xfs_efd_zone);
out_destroy_buf_item_zone:
kmem_cache_destroy(xfs_buf_item_zone);
out_destroy_trans_zone:
kmem_cache_destroy(xfs_trans_zone);
out_destroy_ifork_zone:
kmem_cache_destroy(xfs_ifork_zone);
out_destroy_da_state_zone:
kmem_cache_destroy(xfs_da_state_zone);
out_destroy_btree_cur_zone:
kmem_cache_destroy(xfs_btree_cur_zone);
out_destroy_bmap_free_item_zone:
kmem_cache_destroy(xfs_bmap_free_item_zone);
out_destroy_log_ticket_zone:
kmem_cache_destroy(xfs_log_ticket_zone);
out:
return -ENOMEM;
}
STATIC void
xfs_destroy_zones(void)
{
/*
* Make sure all delayed rcu free are flushed before we
* destroy caches.
*/
rcu_barrier();
kmem_cache_destroy(xfs_bui_zone);
kmem_cache_destroy(xfs_bud_zone);
kmem_cache_destroy(xfs_cui_zone);
kmem_cache_destroy(xfs_cud_zone);
kmem_cache_destroy(xfs_rui_zone);
kmem_cache_destroy(xfs_rud_zone);
kmem_cache_destroy(xfs_icreate_zone);
kmem_cache_destroy(xfs_ili_zone);
kmem_cache_destroy(xfs_inode_zone);
kmem_cache_destroy(xfs_efi_zone);
kmem_cache_destroy(xfs_efd_zone);
kmem_cache_destroy(xfs_buf_item_zone);
kmem_cache_destroy(xfs_trans_zone);
kmem_cache_destroy(xfs_ifork_zone);
kmem_cache_destroy(xfs_da_state_zone);
kmem_cache_destroy(xfs_btree_cur_zone);
kmem_cache_destroy(xfs_bmap_free_item_zone);
kmem_cache_destroy(xfs_log_ticket_zone);
}
STATIC int __init
xfs_init_workqueues(void)
{
/*
* The allocation workqueue can be used in memory reclaim situations
* (writepage path), and parallelism is only limited by the number of
* AGs in all the filesystems mounted. Hence use the default large
* max_active value for this workqueue.
*/
xfs_alloc_wq = alloc_workqueue("xfsalloc",
WQ_MEM_RECLAIM|WQ_FREEZABLE, 0);
if (!xfs_alloc_wq)
return -ENOMEM;
xfs_discard_wq = alloc_workqueue("xfsdiscard", WQ_UNBOUND, 0);
if (!xfs_discard_wq)
goto out_free_alloc_wq;
return 0;
out_free_alloc_wq:
destroy_workqueue(xfs_alloc_wq);
return -ENOMEM;
}
STATIC void
xfs_destroy_workqueues(void)
{
destroy_workqueue(xfs_discard_wq);
destroy_workqueue(xfs_alloc_wq);
}
STATIC int __init
init_xfs_fs(void)
{
int error;
xfs_check_ondisk_structs();
printk(KERN_INFO XFS_VERSION_STRING " with "
XFS_BUILD_OPTIONS " enabled\n");
xfs_dir_startup();
error = xfs_init_zones();
if (error)
goto out;
error = xfs_init_workqueues();
if (error)
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
goto out_destroy_zones;
error = xfs_mru_cache_init();
if (error)
goto out_destroy_wq;
error = xfs_buf_init();
if (error)
goto out_mru_cache_uninit;
error = xfs_init_procfs();
if (error)
goto out_buf_terminate;
error = xfs_sysctl_register();
if (error)
goto out_cleanup_procfs;
xfs_kset = kset_create_and_add("xfs", NULL, fs_kobj);
if (!xfs_kset) {
error = -ENOMEM;
goto out_sysctl_unregister;
}
xfsstats.xs_kobj.kobject.kset = xfs_kset;
xfsstats.xs_stats = alloc_percpu(struct xfsstats);
if (!xfsstats.xs_stats) {
error = -ENOMEM;
goto out_kset_unregister;
}
error = xfs_sysfs_init(&xfsstats.xs_kobj, &xfs_stats_ktype, NULL,
"stats");
if (error)
goto out_free_stats;
#ifdef DEBUG
xfs_dbg_kobj.kobject.kset = xfs_kset;
error = xfs_sysfs_init(&xfs_dbg_kobj, &xfs_dbg_ktype, NULL, "debug");
if (error)
goto out_remove_stats_kobj;
#endif
error = xfs_qm_init();
if (error)
goto out_remove_dbg_kobj;
error = register_filesystem(&xfs_fs_type);
if (error)
goto out_qm_exit;
return 0;
out_qm_exit:
xfs_qm_exit();
out_remove_dbg_kobj:
#ifdef DEBUG
xfs_sysfs_del(&xfs_dbg_kobj);
out_remove_stats_kobj:
#endif
xfs_sysfs_del(&xfsstats.xs_kobj);
out_free_stats:
free_percpu(xfsstats.xs_stats);
out_kset_unregister:
kset_unregister(xfs_kset);
out_sysctl_unregister:
xfs_sysctl_unregister();
out_cleanup_procfs:
xfs_cleanup_procfs();
out_buf_terminate:
xfs_buf_terminate();
out_mru_cache_uninit:
xfs_mru_cache_uninit();
out_destroy_wq:
xfs_destroy_workqueues();
out_destroy_zones:
xfs_destroy_zones();
out:
return error;
}
STATIC void __exit
exit_xfs_fs(void)
{
xfs_qm_exit();
unregister_filesystem(&xfs_fs_type);
#ifdef DEBUG
xfs_sysfs_del(&xfs_dbg_kobj);
#endif
xfs_sysfs_del(&xfsstats.xs_kobj);
free_percpu(xfsstats.xs_stats);
kset_unregister(xfs_kset);
xfs_sysctl_unregister();
xfs_cleanup_procfs();
xfs_buf_terminate();
xfs_mru_cache_uninit();
xfs_destroy_workqueues();
xfs_destroy_zones();
xfs_uuid_table_free();
}
module_init(init_xfs_fs);
module_exit(exit_xfs_fs);
MODULE_AUTHOR("Silicon Graphics, Inc.");
MODULE_DESCRIPTION(XFS_VERSION_STRING " with " XFS_BUILD_OPTIONS " enabled");
MODULE_LICENSE("GPL");