linux/net/ipv6/netfilter.c

137 lines
3.5 KiB
C
Raw Normal View History

/*
* IPv6 specific functions of netfilter core
*
* Rusty Russell (C) 2000 -- This code is GPL.
* Patrick McHardy (C) 2006-2012
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ipv6.h>
#include <linux/netfilter.h>
#include <linux/netfilter_ipv6.h>
#include <linux/export.h>
netfilter: add nf_ipv6_ops hook to fix xt_addrtype with IPv6 Quoting https://bugzilla.netfilter.org/show_bug.cgi?id=812: [ ip6tables -m addrtype ] When I tried to use in the nat/PREROUTING it messes up the routing cache even if the rule didn't matched at all. [..] If I remove the --limit-iface-in from the non-working scenario, so just use the -m addrtype --dst-type LOCAL it works! This happens when LOCAL type matching is requested with --limit-iface-in, and the default ipv6 route is via the interface the packet we test arrived on. Because xt_addrtype uses ip6_route_output, the ipv6 routing implementation creates an unwanted cached entry, and the packet won't make it to the real/expected destination. Silently ignoring --limit-iface-in makes the routing work but it breaks rule matching (--dst-type LOCAL with limit-iface-in is supposed to only match if the dst address is configured on the incoming interface; without --limit-iface-in it will match if the address is reachable via lo). The test should call ipv6_chk_addr() instead. However, this would add a link-time dependency on ipv6. There are two possible solutions: 1) Revert the commit that moved ipt_addrtype to xt_addrtype, and put ipv6 specific code into ip6t_addrtype. 2) add new "nf_ipv6_ops" struct to register pointers to ipv6 functions. While the former might seem preferable, Pablo pointed out that there are more xt modules with link-time dependeny issues regarding ipv6, so lets go for 2). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-05-17 11:56:10 +08:00
#include <net/addrconf.h>
#include <net/dst.h>
#include <net/ipv6.h>
#include <net/ip6_route.h>
#include <net/xfrm.h>
#include <net/netfilter/nf_queue.h>
int ip6_route_me_harder(struct net *net, struct sk_buff *skb)
{
const struct ipv6hdr *iph = ipv6_hdr(skb);
struct sock *sk = sk_to_full_sk(skb->sk);
unsigned int hh_len;
struct dst_entry *dst;
int strict = (ipv6_addr_type(&iph->daddr) &
(IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL));
struct flowi6 fl6 = {
.flowi6_oif = sk && sk->sk_bound_dev_if ? sk->sk_bound_dev_if :
strict ? skb_dst(skb)->dev->ifindex : 0,
.flowi6_mark = skb->mark,
.flowi6_uid = sock_net_uid(net, sk),
.daddr = iph->daddr,
.saddr = iph->saddr,
};
int err;
dst = ip6_route_output(net, sk, &fl6);
err = dst->error;
if (err) {
IP6_INC_STATS(net, ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES);
net_dbg_ratelimited("ip6_route_me_harder: No more route\n");
dst_release(dst);
return err;
}
/* Drop old route. */
skb_dst_drop(skb);
skb_dst_set(skb, dst);
#ifdef CONFIG_XFRM
if (!(IP6CB(skb)->flags & IP6SKB_XFRM_TRANSFORMED) &&
xfrm_decode_session(skb, flowi6_to_flowi(&fl6), AF_INET6) == 0) {
skb_dst_set(skb, NULL);
dst = xfrm_lookup(net, dst, flowi6_to_flowi(&fl6), sk, 0);
if (IS_ERR(dst))
return PTR_ERR(dst);
skb_dst_set(skb, dst);
}
#endif
/* Change in oif may mean change in hh_len. */
hh_len = skb_dst(skb)->dev->hard_header_len;
if (skb_headroom(skb) < hh_len &&
pskb_expand_head(skb, HH_DATA_ALIGN(hh_len - skb_headroom(skb)),
0, GFP_ATOMIC))
return -ENOMEM;
return 0;
}
EXPORT_SYMBOL(ip6_route_me_harder);
static int nf_ip6_reroute(struct sk_buff *skb,
const struct nf_queue_entry *entry)
{
struct ip6_rt_info *rt_info = nf_queue_entry_reroute(entry);
if (entry->state.hook == NF_INET_LOCAL_OUT) {
const struct ipv6hdr *iph = ipv6_hdr(skb);
if (!ipv6_addr_equal(&iph->daddr, &rt_info->daddr) ||
!ipv6_addr_equal(&iph->saddr, &rt_info->saddr) ||
skb->mark != rt_info->mark)
return ip6_route_me_harder(entry->state.net, skb);
}
return 0;
}
int __nf_ip6_route(struct net *net, struct dst_entry **dst,
struct flowi *fl, bool strict)
{
static const struct ipv6_pinfo fake_pinfo;
static const struct inet_sock fake_sk = {
/* makes ip6_route_output set RT6_LOOKUP_F_IFACE: */
.sk.sk_bound_dev_if = 1,
.pinet6 = (struct ipv6_pinfo *) &fake_pinfo,
};
const void *sk = strict ? &fake_sk : NULL;
struct dst_entry *result;
int err;
result = ip6_route_output(net, sk, &fl->u.ip6);
err = result->error;
if (err)
dst_release(result);
else
*dst = result;
return err;
}
EXPORT_SYMBOL_GPL(__nf_ip6_route);
netfilter: add nf_ipv6_ops hook to fix xt_addrtype with IPv6 Quoting https://bugzilla.netfilter.org/show_bug.cgi?id=812: [ ip6tables -m addrtype ] When I tried to use in the nat/PREROUTING it messes up the routing cache even if the rule didn't matched at all. [..] If I remove the --limit-iface-in from the non-working scenario, so just use the -m addrtype --dst-type LOCAL it works! This happens when LOCAL type matching is requested with --limit-iface-in, and the default ipv6 route is via the interface the packet we test arrived on. Because xt_addrtype uses ip6_route_output, the ipv6 routing implementation creates an unwanted cached entry, and the packet won't make it to the real/expected destination. Silently ignoring --limit-iface-in makes the routing work but it breaks rule matching (--dst-type LOCAL with limit-iface-in is supposed to only match if the dst address is configured on the incoming interface; without --limit-iface-in it will match if the address is reachable via lo). The test should call ipv6_chk_addr() instead. However, this would add a link-time dependency on ipv6. There are two possible solutions: 1) Revert the commit that moved ipt_addrtype to xt_addrtype, and put ipv6 specific code into ip6t_addrtype. 2) add new "nf_ipv6_ops" struct to register pointers to ipv6 functions. While the former might seem preferable, Pablo pointed out that there are more xt modules with link-time dependeny issues regarding ipv6, so lets go for 2). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-05-17 11:56:10 +08:00
static const struct nf_ipv6_ops ipv6ops = {
#if IS_MODULE(CONFIG_IPV6)
.chk_addr = ipv6_chk_addr,
.route_me_harder = ip6_route_me_harder,
.dev_get_saddr = ipv6_dev_get_saddr,
.route = __nf_ip6_route,
#endif
.route_input = ip6_route_input,
.fragment = ip6_fragment,
.reroute = nf_ip6_reroute,
netfilter: add nf_ipv6_ops hook to fix xt_addrtype with IPv6 Quoting https://bugzilla.netfilter.org/show_bug.cgi?id=812: [ ip6tables -m addrtype ] When I tried to use in the nat/PREROUTING it messes up the routing cache even if the rule didn't matched at all. [..] If I remove the --limit-iface-in from the non-working scenario, so just use the -m addrtype --dst-type LOCAL it works! This happens when LOCAL type matching is requested with --limit-iface-in, and the default ipv6 route is via the interface the packet we test arrived on. Because xt_addrtype uses ip6_route_output, the ipv6 routing implementation creates an unwanted cached entry, and the packet won't make it to the real/expected destination. Silently ignoring --limit-iface-in makes the routing work but it breaks rule matching (--dst-type LOCAL with limit-iface-in is supposed to only match if the dst address is configured on the incoming interface; without --limit-iface-in it will match if the address is reachable via lo). The test should call ipv6_chk_addr() instead. However, this would add a link-time dependency on ipv6. There are two possible solutions: 1) Revert the commit that moved ipt_addrtype to xt_addrtype, and put ipv6 specific code into ip6t_addrtype. 2) add new "nf_ipv6_ops" struct to register pointers to ipv6 functions. While the former might seem preferable, Pablo pointed out that there are more xt modules with link-time dependeny issues regarding ipv6, so lets go for 2). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-05-17 11:56:10 +08:00
};
int __init ipv6_netfilter_init(void)
{
netfilter: add nf_ipv6_ops hook to fix xt_addrtype with IPv6 Quoting https://bugzilla.netfilter.org/show_bug.cgi?id=812: [ ip6tables -m addrtype ] When I tried to use in the nat/PREROUTING it messes up the routing cache even if the rule didn't matched at all. [..] If I remove the --limit-iface-in from the non-working scenario, so just use the -m addrtype --dst-type LOCAL it works! This happens when LOCAL type matching is requested with --limit-iface-in, and the default ipv6 route is via the interface the packet we test arrived on. Because xt_addrtype uses ip6_route_output, the ipv6 routing implementation creates an unwanted cached entry, and the packet won't make it to the real/expected destination. Silently ignoring --limit-iface-in makes the routing work but it breaks rule matching (--dst-type LOCAL with limit-iface-in is supposed to only match if the dst address is configured on the incoming interface; without --limit-iface-in it will match if the address is reachable via lo). The test should call ipv6_chk_addr() instead. However, this would add a link-time dependency on ipv6. There are two possible solutions: 1) Revert the commit that moved ipt_addrtype to xt_addrtype, and put ipv6 specific code into ip6t_addrtype. 2) add new "nf_ipv6_ops" struct to register pointers to ipv6 functions. While the former might seem preferable, Pablo pointed out that there are more xt modules with link-time dependeny issues regarding ipv6, so lets go for 2). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-05-17 11:56:10 +08:00
RCU_INIT_POINTER(nf_ipv6_ops, &ipv6ops);
return 0;
}
/* This can be called from inet6_init() on errors, so it cannot
* be marked __exit. -DaveM
*/
void ipv6_netfilter_fini(void)
{
netfilter: add nf_ipv6_ops hook to fix xt_addrtype with IPv6 Quoting https://bugzilla.netfilter.org/show_bug.cgi?id=812: [ ip6tables -m addrtype ] When I tried to use in the nat/PREROUTING it messes up the routing cache even if the rule didn't matched at all. [..] If I remove the --limit-iface-in from the non-working scenario, so just use the -m addrtype --dst-type LOCAL it works! This happens when LOCAL type matching is requested with --limit-iface-in, and the default ipv6 route is via the interface the packet we test arrived on. Because xt_addrtype uses ip6_route_output, the ipv6 routing implementation creates an unwanted cached entry, and the packet won't make it to the real/expected destination. Silently ignoring --limit-iface-in makes the routing work but it breaks rule matching (--dst-type LOCAL with limit-iface-in is supposed to only match if the dst address is configured on the incoming interface; without --limit-iface-in it will match if the address is reachable via lo). The test should call ipv6_chk_addr() instead. However, this would add a link-time dependency on ipv6. There are two possible solutions: 1) Revert the commit that moved ipt_addrtype to xt_addrtype, and put ipv6 specific code into ip6t_addrtype. 2) add new "nf_ipv6_ops" struct to register pointers to ipv6 functions. While the former might seem preferable, Pablo pointed out that there are more xt modules with link-time dependeny issues regarding ipv6, so lets go for 2). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-05-17 11:56:10 +08:00
RCU_INIT_POINTER(nf_ipv6_ops, NULL);
}