linux/arch/powerpc/kvm/book3s_64_vio_hv.c

658 lines
17 KiB
C
Raw Normal View History

/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
* Copyright 2010 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
* Copyright 2011 David Gibson, IBM Corporation <dwg@au1.ibm.com>
* Copyright 2016 Alexey Kardashevskiy, IBM Corporation <aik@au1.ibm.com>
*/
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kvm.h>
#include <linux/kvm_host.h>
#include <linux/highmem.h>
#include <linux/gfp.h>
#include <linux/slab.h>
#include <linux/hugetlb.h>
#include <linux/list.h>
#include <linux/stringify.h>
#include <asm/kvm_ppc.h>
#include <asm/kvm_book3s.h>
#include <asm/book3s/64/mmu-hash.h>
#include <asm/mmu_context.h>
#include <asm/hvcall.h>
#include <asm/synch.h>
#include <asm/ppc-opcode.h>
#include <asm/kvm_host.h>
#include <asm/udbg.h>
#include <asm/iommu.h>
#include <asm/tce.h>
#include <asm/pte-walk.h>
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
#ifdef CONFIG_BUG
#define WARN_ON_ONCE_RM(condition) ({ \
static bool __section(.data.unlikely) __warned; \
int __ret_warn_once = !!(condition); \
\
if (unlikely(__ret_warn_once && !__warned)) { \
__warned = true; \
pr_err("WARN_ON_ONCE_RM: (%s) at %s:%u\n", \
__stringify(condition), \
__func__, __LINE__); \
dump_stack(); \
} \
unlikely(__ret_warn_once); \
})
#else
#define WARN_ON_ONCE_RM(condition) ({ \
int __ret_warn_on = !!(condition); \
unlikely(__ret_warn_on); \
})
#endif
#define TCES_PER_PAGE (PAGE_SIZE / sizeof(u64))
/*
* Finds a TCE table descriptor by LIOBN.
*
* WARNING: This will be called in real or virtual mode on HV KVM and virtual
* mode on PR KVM
*/
struct kvmppc_spapr_tce_table *kvmppc_find_table(struct kvm *kvm,
unsigned long liobn)
{
struct kvmppc_spapr_tce_table *stt;
list_for_each_entry_lockless(stt, &kvm->arch.spapr_tce_tables, list)
if (stt->liobn == liobn)
return stt;
return NULL;
}
EXPORT_SYMBOL_GPL(kvmppc_find_table);
KVM: PPC: Validate TCEs against preregistered memory page sizes The userspace can request an arbitrary supported page size for a DMA window and this works fine as long as the mapped memory is backed with the pages of the same or bigger size; if this is not the case, mm_iommu_ua_to_hpa{_rm}() fail and tables do not populated with dangerously incorrect TCEs. However since it is quite easy to misconfigure the KVM and we do not do reverts to all changes made to TCE tables if an error happens in a middle, we better do the acceptable page size validation before we even touch the tables. This enhances kvmppc_tce_validate() to check the hardware IOMMU page sizes against the preregistered memory page sizes. Since the new check uses real/virtual mode helpers, this renames kvmppc_tce_validate() to kvmppc_rm_tce_validate() to handle the real mode case and mirrors it for the virtual mode under the old name. The real mode handler is not used for the virtual mode as: 1. it uses _lockless() list traversing primitives instead of RCU; 2. realmode's mm_iommu_ua_to_hpa_rm() uses vmalloc_to_phys() which virtual mode does not have to use and since on POWER9+radix only virtual mode handlers actually work, we do not want to slow down that path even a bit. This removes EXPORT_SYMBOL_GPL(kvmppc_tce_validate) as the validators are static now. From now on the attempts on mapping IOMMU pages bigger than allowed will result in KVM exit. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [mpe: Fix KVM_HV=n build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-10 16:29:10 +08:00
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
/*
* Validates TCE address.
* At the moment flags and page mask are validated.
* As the host kernel does not access those addresses (just puts them
* to the table and user space is supposed to process them), we can skip
* checking other things (such as TCE is a guest RAM address or the page
* was actually allocated).
*/
KVM: PPC: Validate TCEs against preregistered memory page sizes The userspace can request an arbitrary supported page size for a DMA window and this works fine as long as the mapped memory is backed with the pages of the same or bigger size; if this is not the case, mm_iommu_ua_to_hpa{_rm}() fail and tables do not populated with dangerously incorrect TCEs. However since it is quite easy to misconfigure the KVM and we do not do reverts to all changes made to TCE tables if an error happens in a middle, we better do the acceptable page size validation before we even touch the tables. This enhances kvmppc_tce_validate() to check the hardware IOMMU page sizes against the preregistered memory page sizes. Since the new check uses real/virtual mode helpers, this renames kvmppc_tce_validate() to kvmppc_rm_tce_validate() to handle the real mode case and mirrors it for the virtual mode under the old name. The real mode handler is not used for the virtual mode as: 1. it uses _lockless() list traversing primitives instead of RCU; 2. realmode's mm_iommu_ua_to_hpa_rm() uses vmalloc_to_phys() which virtual mode does not have to use and since on POWER9+radix only virtual mode handlers actually work, we do not want to slow down that path even a bit. This removes EXPORT_SYMBOL_GPL(kvmppc_tce_validate) as the validators are static now. From now on the attempts on mapping IOMMU pages bigger than allowed will result in KVM exit. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [mpe: Fix KVM_HV=n build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-10 16:29:10 +08:00
static long kvmppc_rm_tce_validate(struct kvmppc_spapr_tce_table *stt,
unsigned long tce)
{
unsigned long gpa = tce & ~(TCE_PCI_READ | TCE_PCI_WRITE);
enum dma_data_direction dir = iommu_tce_direction(tce);
KVM: PPC: Validate TCEs against preregistered memory page sizes The userspace can request an arbitrary supported page size for a DMA window and this works fine as long as the mapped memory is backed with the pages of the same or bigger size; if this is not the case, mm_iommu_ua_to_hpa{_rm}() fail and tables do not populated with dangerously incorrect TCEs. However since it is quite easy to misconfigure the KVM and we do not do reverts to all changes made to TCE tables if an error happens in a middle, we better do the acceptable page size validation before we even touch the tables. This enhances kvmppc_tce_validate() to check the hardware IOMMU page sizes against the preregistered memory page sizes. Since the new check uses real/virtual mode helpers, this renames kvmppc_tce_validate() to kvmppc_rm_tce_validate() to handle the real mode case and mirrors it for the virtual mode under the old name. The real mode handler is not used for the virtual mode as: 1. it uses _lockless() list traversing primitives instead of RCU; 2. realmode's mm_iommu_ua_to_hpa_rm() uses vmalloc_to_phys() which virtual mode does not have to use and since on POWER9+radix only virtual mode handlers actually work, we do not want to slow down that path even a bit. This removes EXPORT_SYMBOL_GPL(kvmppc_tce_validate) as the validators are static now. From now on the attempts on mapping IOMMU pages bigger than allowed will result in KVM exit. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [mpe: Fix KVM_HV=n build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-10 16:29:10 +08:00
struct kvmppc_spapr_tce_iommu_table *stit;
unsigned long ua = 0;
/* Allow userspace to poison TCE table */
if (dir == DMA_NONE)
return H_SUCCESS;
if (iommu_tce_check_gpa(stt->page_shift, gpa))
return H_PARAMETER;
KVM: PPC: Validate TCEs against preregistered memory page sizes The userspace can request an arbitrary supported page size for a DMA window and this works fine as long as the mapped memory is backed with the pages of the same or bigger size; if this is not the case, mm_iommu_ua_to_hpa{_rm}() fail and tables do not populated with dangerously incorrect TCEs. However since it is quite easy to misconfigure the KVM and we do not do reverts to all changes made to TCE tables if an error happens in a middle, we better do the acceptable page size validation before we even touch the tables. This enhances kvmppc_tce_validate() to check the hardware IOMMU page sizes against the preregistered memory page sizes. Since the new check uses real/virtual mode helpers, this renames kvmppc_tce_validate() to kvmppc_rm_tce_validate() to handle the real mode case and mirrors it for the virtual mode under the old name. The real mode handler is not used for the virtual mode as: 1. it uses _lockless() list traversing primitives instead of RCU; 2. realmode's mm_iommu_ua_to_hpa_rm() uses vmalloc_to_phys() which virtual mode does not have to use and since on POWER9+radix only virtual mode handlers actually work, we do not want to slow down that path even a bit. This removes EXPORT_SYMBOL_GPL(kvmppc_tce_validate) as the validators are static now. From now on the attempts on mapping IOMMU pages bigger than allowed will result in KVM exit. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [mpe: Fix KVM_HV=n build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-10 16:29:10 +08:00
if (kvmppc_gpa_to_ua(stt->kvm, tce & ~(TCE_PCI_READ | TCE_PCI_WRITE),
&ua, NULL))
return H_TOO_HARD;
list_for_each_entry_lockless(stit, &stt->iommu_tables, next) {
unsigned long hpa = 0;
struct mm_iommu_table_group_mem_t *mem;
long shift = stit->tbl->it_page_shift;
mem = mm_iommu_lookup_rm(stt->kvm->mm, ua, 1ULL << shift);
if (!mem)
return H_TOO_HARD;
if (mm_iommu_ua_to_hpa_rm(mem, ua, shift, &hpa))
return H_TOO_HARD;
}
return H_SUCCESS;
}
KVM: PPC: Validate TCEs against preregistered memory page sizes The userspace can request an arbitrary supported page size for a DMA window and this works fine as long as the mapped memory is backed with the pages of the same or bigger size; if this is not the case, mm_iommu_ua_to_hpa{_rm}() fail and tables do not populated with dangerously incorrect TCEs. However since it is quite easy to misconfigure the KVM and we do not do reverts to all changes made to TCE tables if an error happens in a middle, we better do the acceptable page size validation before we even touch the tables. This enhances kvmppc_tce_validate() to check the hardware IOMMU page sizes against the preregistered memory page sizes. Since the new check uses real/virtual mode helpers, this renames kvmppc_tce_validate() to kvmppc_rm_tce_validate() to handle the real mode case and mirrors it for the virtual mode under the old name. The real mode handler is not used for the virtual mode as: 1. it uses _lockless() list traversing primitives instead of RCU; 2. realmode's mm_iommu_ua_to_hpa_rm() uses vmalloc_to_phys() which virtual mode does not have to use and since on POWER9+radix only virtual mode handlers actually work, we do not want to slow down that path even a bit. This removes EXPORT_SYMBOL_GPL(kvmppc_tce_validate) as the validators are static now. From now on the attempts on mapping IOMMU pages bigger than allowed will result in KVM exit. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [mpe: Fix KVM_HV=n build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-10 16:29:10 +08:00
#endif /* CONFIG_KVM_BOOK3S_HV_POSSIBLE */
/* Note on the use of page_address() in real mode,
*
* It is safe to use page_address() in real mode on ppc64 because
* page_address() is always defined as lowmem_page_address()
* which returns __va(PFN_PHYS(page_to_pfn(page))) which is arithmetic
* operation and does not access page struct.
*
* Theoretically page_address() could be defined different
* but either WANT_PAGE_VIRTUAL or HASHED_PAGE_VIRTUAL
* would have to be enabled.
* WANT_PAGE_VIRTUAL is never enabled on ppc32/ppc64,
* HASHED_PAGE_VIRTUAL could be enabled for ppc32 only and only
* if CONFIG_HIGHMEM is defined. As CONFIG_SPARSEMEM_VMEMMAP
* is not expected to be enabled on ppc32, page_address()
* is safe for ppc32 as well.
*
* WARNING: This will be called in real-mode on HV KVM and virtual
* mode on PR KVM
*/
static u64 *kvmppc_page_address(struct page *page)
{
#if defined(HASHED_PAGE_VIRTUAL) || defined(WANT_PAGE_VIRTUAL)
#error TODO: fix to avoid page_address() here
#endif
return (u64 *) page_address(page);
}
/*
* Handles TCE requests for emulated devices.
* Puts guest TCE values to the table and expects user space to convert them.
* Called in both real and virtual modes.
* Cannot fail so kvmppc_tce_validate must be called before it.
*
* WARNING: This will be called in real-mode on HV KVM and virtual
* mode on PR KVM
*/
void kvmppc_tce_put(struct kvmppc_spapr_tce_table *stt,
unsigned long idx, unsigned long tce)
{
struct page *page;
u64 *tbl;
idx -= stt->offset;
page = stt->pages[idx / TCES_PER_PAGE];
tbl = kvmppc_page_address(page);
tbl[idx % TCES_PER_PAGE] = tce;
}
EXPORT_SYMBOL_GPL(kvmppc_tce_put);
long kvmppc_gpa_to_ua(struct kvm *kvm, unsigned long gpa,
unsigned long *ua, unsigned long **prmap)
{
unsigned long gfn = gpa >> PAGE_SHIFT;
struct kvm_memory_slot *memslot;
memslot = search_memslots(kvm_memslots(kvm), gfn);
if (!memslot)
return -EINVAL;
*ua = __gfn_to_hva_memslot(memslot, gfn) |
(gpa & ~(PAGE_MASK | TCE_PCI_READ | TCE_PCI_WRITE));
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
if (prmap)
*prmap = &memslot->arch.rmap[gfn - memslot->base_gfn];
#endif
return 0;
}
EXPORT_SYMBOL_GPL(kvmppc_gpa_to_ua);
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
KVM: PPC: Avoid marking DMA-mapped pages dirty in real mode At the moment the real mode handler of H_PUT_TCE calls iommu_tce_xchg_rm() which in turn reads the old TCE and if it was a valid entry, marks the physical page dirty if it was mapped for writing. Since it is in real mode, realmode_pfn_to_page() is used instead of pfn_to_page() to get the page struct. However SetPageDirty() itself reads the compound page head and returns a virtual address for the head page struct and setting dirty bit for that kills the system. This adds additional dirty bit tracking into the MM/IOMMU API for use in the real mode. Note that this does not change how VFIO and KVM (in virtual mode) set this bit. The KVM (real mode) changes include: - use the lowest bit of the cached host phys address to carry the dirty bit; - mark pages dirty when they are unpinned which happens when the preregistered memory is released which always happens in virtual mode; - add mm_iommu_ua_mark_dirty_rm() helper to set delayed dirty bit; - change iommu_tce_xchg_rm() to take the kvm struct for the mm to use in the new mm_iommu_ua_mark_dirty_rm() helper; - move iommu_tce_xchg_rm() to book3s_64_vio_hv.c (which is the only caller anyway) to reduce the real mode KVM and IOMMU knowledge across different subsystems. This removes realmode_pfn_to_page() as it is not used anymore. While we at it, remove some EXPORT_SYMBOL_GPL() as that code is for the real mode only and modules cannot call it anyway. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-09-10 16:29:07 +08:00
static long iommu_tce_xchg_rm(struct mm_struct *mm, struct iommu_table *tbl,
unsigned long entry, unsigned long *hpa,
enum dma_data_direction *direction)
{
long ret;
ret = tbl->it_ops->exchange_rm(tbl, entry, hpa, direction);
if (!ret && ((*direction == DMA_FROM_DEVICE) ||
(*direction == DMA_BIDIRECTIONAL))) {
__be64 *pua = IOMMU_TABLE_USERSPACE_ENTRY_RM(tbl, entry);
/*
* kvmppc_rm_tce_iommu_do_map() updates the UA cache after
* calling this so we still get here a valid UA.
*/
if (pua && *pua)
mm_iommu_ua_mark_dirty_rm(mm, be64_to_cpu(*pua));
}
return ret;
}
static void kvmppc_rm_clear_tce(struct kvm *kvm, struct iommu_table *tbl,
unsigned long entry)
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
{
unsigned long hpa = 0;
enum dma_data_direction dir = DMA_NONE;
KVM: PPC: Avoid marking DMA-mapped pages dirty in real mode At the moment the real mode handler of H_PUT_TCE calls iommu_tce_xchg_rm() which in turn reads the old TCE and if it was a valid entry, marks the physical page dirty if it was mapped for writing. Since it is in real mode, realmode_pfn_to_page() is used instead of pfn_to_page() to get the page struct. However SetPageDirty() itself reads the compound page head and returns a virtual address for the head page struct and setting dirty bit for that kills the system. This adds additional dirty bit tracking into the MM/IOMMU API for use in the real mode. Note that this does not change how VFIO and KVM (in virtual mode) set this bit. The KVM (real mode) changes include: - use the lowest bit of the cached host phys address to carry the dirty bit; - mark pages dirty when they are unpinned which happens when the preregistered memory is released which always happens in virtual mode; - add mm_iommu_ua_mark_dirty_rm() helper to set delayed dirty bit; - change iommu_tce_xchg_rm() to take the kvm struct for the mm to use in the new mm_iommu_ua_mark_dirty_rm() helper; - move iommu_tce_xchg_rm() to book3s_64_vio_hv.c (which is the only caller anyway) to reduce the real mode KVM and IOMMU knowledge across different subsystems. This removes realmode_pfn_to_page() as it is not used anymore. While we at it, remove some EXPORT_SYMBOL_GPL() as that code is for the real mode only and modules cannot call it anyway. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-09-10 16:29:07 +08:00
iommu_tce_xchg_rm(kvm->mm, tbl, entry, &hpa, &dir);
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
}
static long kvmppc_rm_tce_iommu_mapped_dec(struct kvm *kvm,
struct iommu_table *tbl, unsigned long entry)
{
struct mm_iommu_table_group_mem_t *mem = NULL;
const unsigned long pgsize = 1ULL << tbl->it_page_shift;
powerpc/powernv/ioda: Allocate indirect TCE levels on demand At the moment we allocate the entire TCE table, twice (hardware part and userspace translation cache). This normally works as we normally have contigous memory and the guest will map entire RAM for 64bit DMA. However if we have sparse RAM (one example is a memory device), then we will allocate TCEs which will never be used as the guest only maps actual memory for DMA. If it is a single level TCE table, there is nothing we can really do but if it a multilevel table, we can skip allocating TCEs we know we won't need. This adds ability to allocate only first level, saving memory. This changes iommu_table::free() to avoid allocating of an extra level; iommu_table::set() will do this when needed. This adds @alloc parameter to iommu_table::exchange() to tell the callback if it can allocate an extra level; the flag is set to "false" for the realmode KVM handlers of H_PUT_TCE hcalls and the callback returns H_TOO_HARD. This still requires the entire table to be counted in mm::locked_vm. To be conservative, this only does on-demand allocation when the usespace cache table is requested which is the case of VFIO. The example math for a system replicating a powernv setup with NVLink2 in a guest: 16GB RAM mapped at 0x0 128GB GPU RAM window (16GB of actual RAM) mapped at 0x244000000000 the table to cover that all with 64K pages takes: (((0x244000000000 + 0x2000000000) >> 16)*8)>>20 = 4556MB If we allocate only necessary TCE levels, we will only need: (((0x400000000 + 0x400000000) >> 16)*8)>>20 = 4MB (plus some for indirect levels). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-04 14:13:49 +08:00
__be64 *pua = IOMMU_TABLE_USERSPACE_ENTRY_RM(tbl, entry);
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
if (!pua)
/* it_userspace allocation might be delayed */
return H_TOO_HARD;
mem = mm_iommu_lookup_rm(kvm->mm, be64_to_cpu(*pua), pgsize);
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
if (!mem)
return H_TOO_HARD;
mm_iommu_mapped_dec(mem);
*pua = cpu_to_be64(0);
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
return H_SUCCESS;
}
static long kvmppc_rm_tce_iommu_do_unmap(struct kvm *kvm,
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
struct iommu_table *tbl, unsigned long entry)
{
enum dma_data_direction dir = DMA_NONE;
unsigned long hpa = 0;
long ret;
KVM: PPC: Avoid marking DMA-mapped pages dirty in real mode At the moment the real mode handler of H_PUT_TCE calls iommu_tce_xchg_rm() which in turn reads the old TCE and if it was a valid entry, marks the physical page dirty if it was mapped for writing. Since it is in real mode, realmode_pfn_to_page() is used instead of pfn_to_page() to get the page struct. However SetPageDirty() itself reads the compound page head and returns a virtual address for the head page struct and setting dirty bit for that kills the system. This adds additional dirty bit tracking into the MM/IOMMU API for use in the real mode. Note that this does not change how VFIO and KVM (in virtual mode) set this bit. The KVM (real mode) changes include: - use the lowest bit of the cached host phys address to carry the dirty bit; - mark pages dirty when they are unpinned which happens when the preregistered memory is released which always happens in virtual mode; - add mm_iommu_ua_mark_dirty_rm() helper to set delayed dirty bit; - change iommu_tce_xchg_rm() to take the kvm struct for the mm to use in the new mm_iommu_ua_mark_dirty_rm() helper; - move iommu_tce_xchg_rm() to book3s_64_vio_hv.c (which is the only caller anyway) to reduce the real mode KVM and IOMMU knowledge across different subsystems. This removes realmode_pfn_to_page() as it is not used anymore. While we at it, remove some EXPORT_SYMBOL_GPL() as that code is for the real mode only and modules cannot call it anyway. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-09-10 16:29:07 +08:00
if (iommu_tce_xchg_rm(kvm->mm, tbl, entry, &hpa, &dir))
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
/*
* real mode xchg can fail if struct page crosses
* a page boundary
*/
return H_TOO_HARD;
if (dir == DMA_NONE)
return H_SUCCESS;
ret = kvmppc_rm_tce_iommu_mapped_dec(kvm, tbl, entry);
if (ret)
KVM: PPC: Avoid marking DMA-mapped pages dirty in real mode At the moment the real mode handler of H_PUT_TCE calls iommu_tce_xchg_rm() which in turn reads the old TCE and if it was a valid entry, marks the physical page dirty if it was mapped for writing. Since it is in real mode, realmode_pfn_to_page() is used instead of pfn_to_page() to get the page struct. However SetPageDirty() itself reads the compound page head and returns a virtual address for the head page struct and setting dirty bit for that kills the system. This adds additional dirty bit tracking into the MM/IOMMU API for use in the real mode. Note that this does not change how VFIO and KVM (in virtual mode) set this bit. The KVM (real mode) changes include: - use the lowest bit of the cached host phys address to carry the dirty bit; - mark pages dirty when they are unpinned which happens when the preregistered memory is released which always happens in virtual mode; - add mm_iommu_ua_mark_dirty_rm() helper to set delayed dirty bit; - change iommu_tce_xchg_rm() to take the kvm struct for the mm to use in the new mm_iommu_ua_mark_dirty_rm() helper; - move iommu_tce_xchg_rm() to book3s_64_vio_hv.c (which is the only caller anyway) to reduce the real mode KVM and IOMMU knowledge across different subsystems. This removes realmode_pfn_to_page() as it is not used anymore. While we at it, remove some EXPORT_SYMBOL_GPL() as that code is for the real mode only and modules cannot call it anyway. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-09-10 16:29:07 +08:00
iommu_tce_xchg_rm(kvm->mm, tbl, entry, &hpa, &dir);
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
return ret;
}
static long kvmppc_rm_tce_iommu_unmap(struct kvm *kvm,
struct kvmppc_spapr_tce_table *stt, struct iommu_table *tbl,
unsigned long entry)
{
unsigned long i, ret = H_SUCCESS;
unsigned long subpages = 1ULL << (stt->page_shift - tbl->it_page_shift);
unsigned long io_entry = entry * subpages;
for (i = 0; i < subpages; ++i) {
ret = kvmppc_rm_tce_iommu_do_unmap(kvm, tbl, io_entry + i);
if (ret != H_SUCCESS)
break;
}
return ret;
}
static long kvmppc_rm_tce_iommu_do_map(struct kvm *kvm, struct iommu_table *tbl,
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
unsigned long entry, unsigned long ua,
enum dma_data_direction dir)
{
long ret;
unsigned long hpa = 0;
powerpc/powernv/ioda: Allocate indirect TCE levels on demand At the moment we allocate the entire TCE table, twice (hardware part and userspace translation cache). This normally works as we normally have contigous memory and the guest will map entire RAM for 64bit DMA. However if we have sparse RAM (one example is a memory device), then we will allocate TCEs which will never be used as the guest only maps actual memory for DMA. If it is a single level TCE table, there is nothing we can really do but if it a multilevel table, we can skip allocating TCEs we know we won't need. This adds ability to allocate only first level, saving memory. This changes iommu_table::free() to avoid allocating of an extra level; iommu_table::set() will do this when needed. This adds @alloc parameter to iommu_table::exchange() to tell the callback if it can allocate an extra level; the flag is set to "false" for the realmode KVM handlers of H_PUT_TCE hcalls and the callback returns H_TOO_HARD. This still requires the entire table to be counted in mm::locked_vm. To be conservative, this only does on-demand allocation when the usespace cache table is requested which is the case of VFIO. The example math for a system replicating a powernv setup with NVLink2 in a guest: 16GB RAM mapped at 0x0 128GB GPU RAM window (16GB of actual RAM) mapped at 0x244000000000 the table to cover that all with 64K pages takes: (((0x244000000000 + 0x2000000000) >> 16)*8)>>20 = 4556MB If we allocate only necessary TCE levels, we will only need: (((0x400000000 + 0x400000000) >> 16)*8)>>20 = 4MB (plus some for indirect levels). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-04 14:13:49 +08:00
__be64 *pua = IOMMU_TABLE_USERSPACE_ENTRY_RM(tbl, entry);
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
struct mm_iommu_table_group_mem_t *mem;
if (!pua)
/* it_userspace allocation might be delayed */
return H_TOO_HARD;
mem = mm_iommu_lookup_rm(kvm->mm, ua, 1ULL << tbl->it_page_shift);
if (!mem)
return H_TOO_HARD;
KVM: PPC: Check if IOMMU page is contained in the pinned physical page A VM which has: - a DMA capable device passed through to it (eg. network card); - running a malicious kernel that ignores H_PUT_TCE failure; - capability of using IOMMU pages bigger that physical pages can create an IOMMU mapping that exposes (for example) 16MB of the host physical memory to the device when only 64K was allocated to the VM. The remaining 16MB - 64K will be some other content of host memory, possibly including pages of the VM, but also pages of host kernel memory, host programs or other VMs. The attacking VM does not control the location of the page it can map, and is only allowed to map as many pages as it has pages of RAM. We already have a check in drivers/vfio/vfio_iommu_spapr_tce.c that an IOMMU page is contained in the physical page so the PCI hardware won't get access to unassigned host memory; however this check is missing in the KVM fastpath (H_PUT_TCE accelerated code). We were lucky so far and did not hit this yet as the very first time when the mapping happens we do not have tbl::it_userspace allocated yet and fall back to the userspace which in turn calls VFIO IOMMU driver, this fails and the guest does not retry, This stores the smallest preregistered page size in the preregistered region descriptor and changes the mm_iommu_xxx API to check this against the IOMMU page size. This calculates maximum page size as a minimum of the natural region alignment and compound page size. For the page shift this uses the shift returned by find_linux_pte() which indicates how the page is mapped to the current userspace - if the page is huge and this is not a zero, then it is a leaf pte and the page is mapped within the range. Fixes: 121f80ba68f1 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-17 15:19:13 +08:00
if (WARN_ON_ONCE_RM(mm_iommu_ua_to_hpa_rm(mem, ua, tbl->it_page_shift,
&hpa)))
return H_TOO_HARD;
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
if (WARN_ON_ONCE_RM(mm_iommu_mapped_inc(mem)))
return H_TOO_HARD;
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
KVM: PPC: Avoid marking DMA-mapped pages dirty in real mode At the moment the real mode handler of H_PUT_TCE calls iommu_tce_xchg_rm() which in turn reads the old TCE and if it was a valid entry, marks the physical page dirty if it was mapped for writing. Since it is in real mode, realmode_pfn_to_page() is used instead of pfn_to_page() to get the page struct. However SetPageDirty() itself reads the compound page head and returns a virtual address for the head page struct and setting dirty bit for that kills the system. This adds additional dirty bit tracking into the MM/IOMMU API for use in the real mode. Note that this does not change how VFIO and KVM (in virtual mode) set this bit. The KVM (real mode) changes include: - use the lowest bit of the cached host phys address to carry the dirty bit; - mark pages dirty when they are unpinned which happens when the preregistered memory is released which always happens in virtual mode; - add mm_iommu_ua_mark_dirty_rm() helper to set delayed dirty bit; - change iommu_tce_xchg_rm() to take the kvm struct for the mm to use in the new mm_iommu_ua_mark_dirty_rm() helper; - move iommu_tce_xchg_rm() to book3s_64_vio_hv.c (which is the only caller anyway) to reduce the real mode KVM and IOMMU knowledge across different subsystems. This removes realmode_pfn_to_page() as it is not used anymore. While we at it, remove some EXPORT_SYMBOL_GPL() as that code is for the real mode only and modules cannot call it anyway. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-09-10 16:29:07 +08:00
ret = iommu_tce_xchg_rm(kvm->mm, tbl, entry, &hpa, &dir);
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
if (ret) {
mm_iommu_mapped_dec(mem);
/*
* real mode xchg can fail if struct page crosses
* a page boundary
*/
return H_TOO_HARD;
}
if (dir != DMA_NONE)
kvmppc_rm_tce_iommu_mapped_dec(kvm, tbl, entry);
*pua = cpu_to_be64(ua);
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
return 0;
}
static long kvmppc_rm_tce_iommu_map(struct kvm *kvm,
struct kvmppc_spapr_tce_table *stt, struct iommu_table *tbl,
unsigned long entry, unsigned long ua,
enum dma_data_direction dir)
{
unsigned long i, pgoff, ret = H_SUCCESS;
unsigned long subpages = 1ULL << (stt->page_shift - tbl->it_page_shift);
unsigned long io_entry = entry * subpages;
for (i = 0, pgoff = 0; i < subpages;
++i, pgoff += IOMMU_PAGE_SIZE(tbl)) {
ret = kvmppc_rm_tce_iommu_do_map(kvm, tbl,
io_entry + i, ua + pgoff, dir);
if (ret != H_SUCCESS)
break;
}
return ret;
}
long kvmppc_rm_h_put_tce(struct kvm_vcpu *vcpu, unsigned long liobn,
unsigned long ioba, unsigned long tce)
{
struct kvmppc_spapr_tce_table *stt;
long ret;
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
struct kvmppc_spapr_tce_iommu_table *stit;
unsigned long entry, ua = 0;
enum dma_data_direction dir;
/* udbg_printf("H_PUT_TCE(): liobn=0x%lx ioba=0x%lx, tce=0x%lx\n", */
/* liobn, ioba, tce); */
KVM: PPC: Book3S HV: Add radix checks in real-mode hypercall handlers POWER9 running a radix guest will take some hypervisor interrupts without going to real mode (turning off the MMU). This means that early hypercall handlers may now be called in virtual mode. Most of the handlers work just fine in both modes, but there are some that can crash the host if called in virtual mode, notably the TCE (IOMMU) hypercalls H_PUT_TCE, H_STUFF_TCE and H_PUT_TCE_INDIRECT. These already have both a real-mode and a virtual-mode version, so we arrange for the real-mode version to return H_TOO_HARD for radix guests, which will result in the virtual-mode version being called. The other hypercall which is sensitive to the MMU mode is H_RANDOM. It doesn't have a virtual-mode version, so this adds code to enable it to be called in either mode. An alternative solution was considered which would refuse to call any of the early hypercall handlers when doing a virtual-mode exit from a radix guest. However, the XICS-on-XIVE code depends on the XICS hypercalls being handled early even for virtual-mode exits, because the handlers need to be called before the XIVE vCPU state has been pulled off the hardware. Therefore that solution would have become quite invasive and complicated, and was rejected in favour of the simpler, though less elegant, solution presented here. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-05-10 14:39:41 +08:00
/* For radix, we might be in virtual mode, so punt */
if (kvm_is_radix(vcpu->kvm))
return H_TOO_HARD;
stt = kvmppc_find_table(vcpu->kvm, liobn);
if (!stt)
return H_TOO_HARD;
ret = kvmppc_ioba_validate(stt, ioba, 1);
if (ret != H_SUCCESS)
return ret;
KVM: PPC: Validate TCEs against preregistered memory page sizes The userspace can request an arbitrary supported page size for a DMA window and this works fine as long as the mapped memory is backed with the pages of the same or bigger size; if this is not the case, mm_iommu_ua_to_hpa{_rm}() fail and tables do not populated with dangerously incorrect TCEs. However since it is quite easy to misconfigure the KVM and we do not do reverts to all changes made to TCE tables if an error happens in a middle, we better do the acceptable page size validation before we even touch the tables. This enhances kvmppc_tce_validate() to check the hardware IOMMU page sizes against the preregistered memory page sizes. Since the new check uses real/virtual mode helpers, this renames kvmppc_tce_validate() to kvmppc_rm_tce_validate() to handle the real mode case and mirrors it for the virtual mode under the old name. The real mode handler is not used for the virtual mode as: 1. it uses _lockless() list traversing primitives instead of RCU; 2. realmode's mm_iommu_ua_to_hpa_rm() uses vmalloc_to_phys() which virtual mode does not have to use and since on POWER9+radix only virtual mode handlers actually work, we do not want to slow down that path even a bit. This removes EXPORT_SYMBOL_GPL(kvmppc_tce_validate) as the validators are static now. From now on the attempts on mapping IOMMU pages bigger than allowed will result in KVM exit. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [mpe: Fix KVM_HV=n build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-10 16:29:10 +08:00
ret = kvmppc_rm_tce_validate(stt, tce);
if (ret != H_SUCCESS)
return ret;
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
dir = iommu_tce_direction(tce);
if ((dir != DMA_NONE) && kvmppc_gpa_to_ua(vcpu->kvm,
tce & ~(TCE_PCI_READ | TCE_PCI_WRITE), &ua, NULL))
return H_PARAMETER;
entry = ioba >> stt->page_shift;
list_for_each_entry_lockless(stit, &stt->iommu_tables, next) {
if (dir == DMA_NONE)
ret = kvmppc_rm_tce_iommu_unmap(vcpu->kvm, stt,
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
stit->tbl, entry);
else
ret = kvmppc_rm_tce_iommu_map(vcpu->kvm, stt,
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
stit->tbl, entry, ua, dir);
if (ret == H_SUCCESS)
continue;
if (ret == H_TOO_HARD)
return ret;
WARN_ON_ONCE_RM(1);
KVM: PPC: Avoid marking DMA-mapped pages dirty in real mode At the moment the real mode handler of H_PUT_TCE calls iommu_tce_xchg_rm() which in turn reads the old TCE and if it was a valid entry, marks the physical page dirty if it was mapped for writing. Since it is in real mode, realmode_pfn_to_page() is used instead of pfn_to_page() to get the page struct. However SetPageDirty() itself reads the compound page head and returns a virtual address for the head page struct and setting dirty bit for that kills the system. This adds additional dirty bit tracking into the MM/IOMMU API for use in the real mode. Note that this does not change how VFIO and KVM (in virtual mode) set this bit. The KVM (real mode) changes include: - use the lowest bit of the cached host phys address to carry the dirty bit; - mark pages dirty when they are unpinned which happens when the preregistered memory is released which always happens in virtual mode; - add mm_iommu_ua_mark_dirty_rm() helper to set delayed dirty bit; - change iommu_tce_xchg_rm() to take the kvm struct for the mm to use in the new mm_iommu_ua_mark_dirty_rm() helper; - move iommu_tce_xchg_rm() to book3s_64_vio_hv.c (which is the only caller anyway) to reduce the real mode KVM and IOMMU knowledge across different subsystems. This removes realmode_pfn_to_page() as it is not used anymore. While we at it, remove some EXPORT_SYMBOL_GPL() as that code is for the real mode only and modules cannot call it anyway. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-09-10 16:29:07 +08:00
kvmppc_rm_clear_tce(vcpu->kvm, stit->tbl, entry);
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
}
kvmppc_tce_put(stt, entry, tce);
return H_SUCCESS;
}
static long kvmppc_rm_ua_to_hpa(struct kvm_vcpu *vcpu,
unsigned long ua, unsigned long *phpa)
{
pte_t *ptep, pte;
unsigned shift = 0;
/*
* Called in real mode with MSR_EE = 0. We are safe here.
* It is ok to do the lookup with arch.pgdir here, because
* we are doing this on secondary cpus and current task there
* is not the hypervisor. Also this is safe against THP in the
* host, because an IPI to primary thread will wait for the secondary
* to exit which will agains result in the below page table walk
* to finish.
*/
ptep = __find_linux_pte(vcpu->arch.pgdir, ua, NULL, &shift);
if (!ptep || !pte_present(*ptep))
return -ENXIO;
pte = *ptep;
if (!shift)
shift = PAGE_SHIFT;
/* Avoid handling anything potentially complicated in realmode */
if (shift > PAGE_SHIFT)
return -EAGAIN;
if (!pte_young(pte))
return -EAGAIN;
*phpa = (pte_pfn(pte) << PAGE_SHIFT) | (ua & ((1ULL << shift) - 1)) |
(ua & ~PAGE_MASK);
return 0;
}
long kvmppc_rm_h_put_tce_indirect(struct kvm_vcpu *vcpu,
unsigned long liobn, unsigned long ioba,
unsigned long tce_list, unsigned long npages)
{
struct kvmppc_spapr_tce_table *stt;
long i, ret = H_SUCCESS;
unsigned long tces, entry, ua = 0;
unsigned long *rmap = NULL;
bool prereg = false;
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
struct kvmppc_spapr_tce_iommu_table *stit;
KVM: PPC: Book3S HV: Add radix checks in real-mode hypercall handlers POWER9 running a radix guest will take some hypervisor interrupts without going to real mode (turning off the MMU). This means that early hypercall handlers may now be called in virtual mode. Most of the handlers work just fine in both modes, but there are some that can crash the host if called in virtual mode, notably the TCE (IOMMU) hypercalls H_PUT_TCE, H_STUFF_TCE and H_PUT_TCE_INDIRECT. These already have both a real-mode and a virtual-mode version, so we arrange for the real-mode version to return H_TOO_HARD for radix guests, which will result in the virtual-mode version being called. The other hypercall which is sensitive to the MMU mode is H_RANDOM. It doesn't have a virtual-mode version, so this adds code to enable it to be called in either mode. An alternative solution was considered which would refuse to call any of the early hypercall handlers when doing a virtual-mode exit from a radix guest. However, the XICS-on-XIVE code depends on the XICS hypercalls being handled early even for virtual-mode exits, because the handlers need to be called before the XIVE vCPU state has been pulled off the hardware. Therefore that solution would have become quite invasive and complicated, and was rejected in favour of the simpler, though less elegant, solution presented here. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-05-10 14:39:41 +08:00
/* For radix, we might be in virtual mode, so punt */
if (kvm_is_radix(vcpu->kvm))
return H_TOO_HARD;
stt = kvmppc_find_table(vcpu->kvm, liobn);
if (!stt)
return H_TOO_HARD;
entry = ioba >> stt->page_shift;
/*
* The spec says that the maximum size of the list is 512 TCEs
* so the whole table addressed resides in 4K page
*/
if (npages > 512)
return H_PARAMETER;
if (tce_list & (SZ_4K - 1))
return H_PARAMETER;
ret = kvmppc_ioba_validate(stt, ioba, npages);
if (ret != H_SUCCESS)
return ret;
if (mm_iommu_preregistered(vcpu->kvm->mm)) {
/*
* We get here if guest memory was pre-registered which
* is normally VFIO case and gpa->hpa translation does not
* depend on hpt.
*/
struct mm_iommu_table_group_mem_t *mem;
if (kvmppc_gpa_to_ua(vcpu->kvm, tce_list, &ua, NULL))
return H_TOO_HARD;
mem = mm_iommu_lookup_rm(vcpu->kvm->mm, ua, IOMMU_PAGE_SIZE_4K);
if (mem)
KVM: PPC: Check if IOMMU page is contained in the pinned physical page A VM which has: - a DMA capable device passed through to it (eg. network card); - running a malicious kernel that ignores H_PUT_TCE failure; - capability of using IOMMU pages bigger that physical pages can create an IOMMU mapping that exposes (for example) 16MB of the host physical memory to the device when only 64K was allocated to the VM. The remaining 16MB - 64K will be some other content of host memory, possibly including pages of the VM, but also pages of host kernel memory, host programs or other VMs. The attacking VM does not control the location of the page it can map, and is only allowed to map as many pages as it has pages of RAM. We already have a check in drivers/vfio/vfio_iommu_spapr_tce.c that an IOMMU page is contained in the physical page so the PCI hardware won't get access to unassigned host memory; however this check is missing in the KVM fastpath (H_PUT_TCE accelerated code). We were lucky so far and did not hit this yet as the very first time when the mapping happens we do not have tbl::it_userspace allocated yet and fall back to the userspace which in turn calls VFIO IOMMU driver, this fails and the guest does not retry, This stores the smallest preregistered page size in the preregistered region descriptor and changes the mm_iommu_xxx API to check this against the IOMMU page size. This calculates maximum page size as a minimum of the natural region alignment and compound page size. For the page shift this uses the shift returned by find_linux_pte() which indicates how the page is mapped to the current userspace - if the page is huge and this is not a zero, then it is a leaf pte and the page is mapped within the range. Fixes: 121f80ba68f1 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-17 15:19:13 +08:00
prereg = mm_iommu_ua_to_hpa_rm(mem, ua,
IOMMU_PAGE_SHIFT_4K, &tces) == 0;
}
if (!prereg) {
/*
* This is usually a case of a guest with emulated devices only
* when TCE list is not in preregistered memory.
* We do not require memory to be preregistered in this case
* so lock rmap and do __find_linux_pte_or_hugepte().
*/
if (kvmppc_gpa_to_ua(vcpu->kvm, tce_list, &ua, &rmap))
return H_TOO_HARD;
rmap = (void *) vmalloc_to_phys(rmap);
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
if (WARN_ON_ONCE_RM(!rmap))
return H_TOO_HARD;
/*
* Synchronize with the MMU notifier callbacks in
* book3s_64_mmu_hv.c (kvm_unmap_hva_range_hv etc.).
* While we have the rmap lock, code running on other CPUs
* cannot finish unmapping the host real page that backs
* this guest real page, so we are OK to access the host
* real page.
*/
lock_rmap(rmap);
if (kvmppc_rm_ua_to_hpa(vcpu, ua, &tces)) {
ret = H_TOO_HARD;
goto unlock_exit;
}
}
for (i = 0; i < npages; ++i) {
unsigned long tce = be64_to_cpu(((u64 *)tces)[i]);
KVM: PPC: Validate TCEs against preregistered memory page sizes The userspace can request an arbitrary supported page size for a DMA window and this works fine as long as the mapped memory is backed with the pages of the same or bigger size; if this is not the case, mm_iommu_ua_to_hpa{_rm}() fail and tables do not populated with dangerously incorrect TCEs. However since it is quite easy to misconfigure the KVM and we do not do reverts to all changes made to TCE tables if an error happens in a middle, we better do the acceptable page size validation before we even touch the tables. This enhances kvmppc_tce_validate() to check the hardware IOMMU page sizes against the preregistered memory page sizes. Since the new check uses real/virtual mode helpers, this renames kvmppc_tce_validate() to kvmppc_rm_tce_validate() to handle the real mode case and mirrors it for the virtual mode under the old name. The real mode handler is not used for the virtual mode as: 1. it uses _lockless() list traversing primitives instead of RCU; 2. realmode's mm_iommu_ua_to_hpa_rm() uses vmalloc_to_phys() which virtual mode does not have to use and since on POWER9+radix only virtual mode handlers actually work, we do not want to slow down that path even a bit. This removes EXPORT_SYMBOL_GPL(kvmppc_tce_validate) as the validators are static now. From now on the attempts on mapping IOMMU pages bigger than allowed will result in KVM exit. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [mpe: Fix KVM_HV=n build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-10 16:29:10 +08:00
ret = kvmppc_rm_tce_validate(stt, tce);
if (ret != H_SUCCESS)
goto unlock_exit;
}
for (i = 0; i < npages; ++i) {
unsigned long tce = be64_to_cpu(((u64 *)tces)[i]);
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
ua = 0;
if (kvmppc_gpa_to_ua(vcpu->kvm,
tce & ~(TCE_PCI_READ | TCE_PCI_WRITE),
&ua, NULL))
return H_PARAMETER;
list_for_each_entry_lockless(stit, &stt->iommu_tables, next) {
ret = kvmppc_rm_tce_iommu_map(vcpu->kvm, stt,
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
stit->tbl, entry + i, ua,
iommu_tce_direction(tce));
if (ret == H_SUCCESS)
continue;
if (ret == H_TOO_HARD)
goto unlock_exit;
WARN_ON_ONCE_RM(1);
KVM: PPC: Avoid marking DMA-mapped pages dirty in real mode At the moment the real mode handler of H_PUT_TCE calls iommu_tce_xchg_rm() which in turn reads the old TCE and if it was a valid entry, marks the physical page dirty if it was mapped for writing. Since it is in real mode, realmode_pfn_to_page() is used instead of pfn_to_page() to get the page struct. However SetPageDirty() itself reads the compound page head and returns a virtual address for the head page struct and setting dirty bit for that kills the system. This adds additional dirty bit tracking into the MM/IOMMU API for use in the real mode. Note that this does not change how VFIO and KVM (in virtual mode) set this bit. The KVM (real mode) changes include: - use the lowest bit of the cached host phys address to carry the dirty bit; - mark pages dirty when they are unpinned which happens when the preregistered memory is released which always happens in virtual mode; - add mm_iommu_ua_mark_dirty_rm() helper to set delayed dirty bit; - change iommu_tce_xchg_rm() to take the kvm struct for the mm to use in the new mm_iommu_ua_mark_dirty_rm() helper; - move iommu_tce_xchg_rm() to book3s_64_vio_hv.c (which is the only caller anyway) to reduce the real mode KVM and IOMMU knowledge across different subsystems. This removes realmode_pfn_to_page() as it is not used anymore. While we at it, remove some EXPORT_SYMBOL_GPL() as that code is for the real mode only and modules cannot call it anyway. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-09-10 16:29:07 +08:00
kvmppc_rm_clear_tce(vcpu->kvm, stit->tbl, entry);
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
}
kvmppc_tce_put(stt, entry + i, tce);
}
unlock_exit:
if (rmap)
unlock_rmap(rmap);
return ret;
}
long kvmppc_rm_h_stuff_tce(struct kvm_vcpu *vcpu,
unsigned long liobn, unsigned long ioba,
unsigned long tce_value, unsigned long npages)
{
struct kvmppc_spapr_tce_table *stt;
long i, ret;
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
struct kvmppc_spapr_tce_iommu_table *stit;
KVM: PPC: Book3S HV: Add radix checks in real-mode hypercall handlers POWER9 running a radix guest will take some hypervisor interrupts without going to real mode (turning off the MMU). This means that early hypercall handlers may now be called in virtual mode. Most of the handlers work just fine in both modes, but there are some that can crash the host if called in virtual mode, notably the TCE (IOMMU) hypercalls H_PUT_TCE, H_STUFF_TCE and H_PUT_TCE_INDIRECT. These already have both a real-mode and a virtual-mode version, so we arrange for the real-mode version to return H_TOO_HARD for radix guests, which will result in the virtual-mode version being called. The other hypercall which is sensitive to the MMU mode is H_RANDOM. It doesn't have a virtual-mode version, so this adds code to enable it to be called in either mode. An alternative solution was considered which would refuse to call any of the early hypercall handlers when doing a virtual-mode exit from a radix guest. However, the XICS-on-XIVE code depends on the XICS hypercalls being handled early even for virtual-mode exits, because the handlers need to be called before the XIVE vCPU state has been pulled off the hardware. Therefore that solution would have become quite invasive and complicated, and was rejected in favour of the simpler, though less elegant, solution presented here. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-05-10 14:39:41 +08:00
/* For radix, we might be in virtual mode, so punt */
if (kvm_is_radix(vcpu->kvm))
return H_TOO_HARD;
stt = kvmppc_find_table(vcpu->kvm, liobn);
if (!stt)
return H_TOO_HARD;
ret = kvmppc_ioba_validate(stt, ioba, npages);
if (ret != H_SUCCESS)
return ret;
/* Check permission bits only to allow userspace poison TCE for debug */
if (tce_value & (TCE_PCI_WRITE | TCE_PCI_READ))
return H_PARAMETER;
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
list_for_each_entry_lockless(stit, &stt->iommu_tables, next) {
unsigned long entry = ioba >> stt->page_shift;
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
for (i = 0; i < npages; ++i) {
ret = kvmppc_rm_tce_iommu_unmap(vcpu->kvm, stt,
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
stit->tbl, entry + i);
if (ret == H_SUCCESS)
continue;
if (ret == H_TOO_HARD)
return ret;
WARN_ON_ONCE_RM(1);
KVM: PPC: Avoid marking DMA-mapped pages dirty in real mode At the moment the real mode handler of H_PUT_TCE calls iommu_tce_xchg_rm() which in turn reads the old TCE and if it was a valid entry, marks the physical page dirty if it was mapped for writing. Since it is in real mode, realmode_pfn_to_page() is used instead of pfn_to_page() to get the page struct. However SetPageDirty() itself reads the compound page head and returns a virtual address for the head page struct and setting dirty bit for that kills the system. This adds additional dirty bit tracking into the MM/IOMMU API for use in the real mode. Note that this does not change how VFIO and KVM (in virtual mode) set this bit. The KVM (real mode) changes include: - use the lowest bit of the cached host phys address to carry the dirty bit; - mark pages dirty when they are unpinned which happens when the preregistered memory is released which always happens in virtual mode; - add mm_iommu_ua_mark_dirty_rm() helper to set delayed dirty bit; - change iommu_tce_xchg_rm() to take the kvm struct for the mm to use in the new mm_iommu_ua_mark_dirty_rm() helper; - move iommu_tce_xchg_rm() to book3s_64_vio_hv.c (which is the only caller anyway) to reduce the real mode KVM and IOMMU knowledge across different subsystems. This removes realmode_pfn_to_page() as it is not used anymore. While we at it, remove some EXPORT_SYMBOL_GPL() as that code is for the real mode only and modules cannot call it anyway. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-09-10 16:29:07 +08:00
kvmppc_rm_clear_tce(vcpu->kvm, stit->tbl, entry);
KVM: PPC: VFIO: Add in-kernel acceleration for VFIO This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT and H_STUFF_TCE requests targeted an IOMMU TCE table used for VFIO without passing them to user space which saves time on switching to user space and back. This adds H_PUT_TCE/H_PUT_TCE_INDIRECT/H_STUFF_TCE handlers to KVM. KVM tries to handle a TCE request in the real mode, if failed it passes the request to the virtual mode to complete the operation. If it a virtual mode handler fails, the request is passed to the user space; this is not expected to happen though. To avoid dealing with page use counters (which is tricky in real mode), this only accelerates SPAPR TCE IOMMU v2 clients which are required to pre-register the userspace memory. The very first TCE request will be handled in the VFIO SPAPR TCE driver anyway as the userspace view of the TCE table (iommu_table::it_userspace) is not allocated till the very first mapping happens and we cannot call vmalloc in real mode. If we fail to update a hardware IOMMU table unexpected reason, we just clear it and move on as there is nothing really we can do about it - for example, if we hot plug a VFIO device to a guest, existing TCE tables will be mirrored automatically to the hardware and there is no interface to report to the guest about possible failures. This adds new attribute - KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE - to the VFIO KVM device. It takes a VFIO group fd and SPAPR TCE table fd and associates a physical IOMMU table with the SPAPR TCE table (which is a guest view of the hardware IOMMU table). The iommu_table object is cached and referenced so we do not have to look up for it in real mode. This does not implement the UNSET counterpart as there is no use for it - once the acceleration is enabled, the existing userspace won't disable it unless a VFIO container is destroyed; this adds necessary cleanup to the KVM_DEV_VFIO_GROUP_DEL handler. This advertises the new KVM_CAP_SPAPR_TCE_VFIO capability to the user space. This adds real mode version of WARN_ON_ONCE() as the generic version causes problems with rcu_sched. Since we testing what vmalloc_to_phys() returns in the code, this also adds a check for already existing vmalloc_to_phys() call in kvmppc_rm_h_put_tce_indirect(). This finally makes use of vfio_external_user_iommu_id() which was introduced quite some time ago and was considered for removal. Tests show that this patch increases transmission speed from 220MB/s to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-22 12:21:56 +08:00
}
}
for (i = 0; i < npages; ++i, ioba += (1ULL << stt->page_shift))
kvmppc_tce_put(stt, ioba >> stt->page_shift, tce_value);
return H_SUCCESS;
}
KVM: PPC: Book3S HV: Add radix checks in real-mode hypercall handlers POWER9 running a radix guest will take some hypervisor interrupts without going to real mode (turning off the MMU). This means that early hypercall handlers may now be called in virtual mode. Most of the handlers work just fine in both modes, but there are some that can crash the host if called in virtual mode, notably the TCE (IOMMU) hypercalls H_PUT_TCE, H_STUFF_TCE and H_PUT_TCE_INDIRECT. These already have both a real-mode and a virtual-mode version, so we arrange for the real-mode version to return H_TOO_HARD for radix guests, which will result in the virtual-mode version being called. The other hypercall which is sensitive to the MMU mode is H_RANDOM. It doesn't have a virtual-mode version, so this adds code to enable it to be called in either mode. An alternative solution was considered which would refuse to call any of the early hypercall handlers when doing a virtual-mode exit from a radix guest. However, the XICS-on-XIVE code depends on the XICS hypercalls being handled early even for virtual-mode exits, because the handlers need to be called before the XIVE vCPU state has been pulled off the hardware. Therefore that solution would have become quite invasive and complicated, and was rejected in favour of the simpler, though less elegant, solution presented here. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-05-10 14:39:41 +08:00
/* This can be called in either virtual mode or real mode */
long kvmppc_h_get_tce(struct kvm_vcpu *vcpu, unsigned long liobn,
unsigned long ioba)
{
struct kvmppc_spapr_tce_table *stt;
long ret;
unsigned long idx;
struct page *page;
u64 *tbl;
stt = kvmppc_find_table(vcpu->kvm, liobn);
if (!stt)
return H_TOO_HARD;
ret = kvmppc_ioba_validate(stt, ioba, 1);
if (ret != H_SUCCESS)
return ret;
idx = (ioba >> stt->page_shift) - stt->offset;
page = stt->pages[idx / TCES_PER_PAGE];
tbl = (u64 *)page_address(page);
vcpu->arch.regs.gpr[4] = tbl[idx % TCES_PER_PAGE];
return H_SUCCESS;
}
EXPORT_SYMBOL_GPL(kvmppc_h_get_tce);
#endif /* KVM_BOOK3S_HV_POSSIBLE */