PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
/*
|
|
|
|
* File: drivers/pci/pcie/aspm.c
|
2009-12-03 19:49:24 +08:00
|
|
|
* Enabling PCIe link L0s/L1 state and Clock Power Management
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
*
|
|
|
|
* Copyright (C) 2007 Intel
|
|
|
|
* Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com)
|
|
|
|
* Copyright (C) Shaohua Li (shaohua.li@intel.com)
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/moduleparam.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/pci_regs.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/pm.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/slab.h>
|
2008-12-09 20:05:09 +08:00
|
|
|
#include <linux/jiffies.h>
|
2009-01-06 07:21:04 +08:00
|
|
|
#include <linux/delay.h>
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
#include <linux/pci-aspm.h>
|
|
|
|
#include "../pci.h"
|
|
|
|
|
|
|
|
#ifdef MODULE_PARAM_PREFIX
|
|
|
|
#undef MODULE_PARAM_PREFIX
|
|
|
|
#endif
|
|
|
|
#define MODULE_PARAM_PREFIX "pcie_aspm."
|
|
|
|
|
2009-08-19 10:02:13 +08:00
|
|
|
/* Note: those are not register definitions */
|
|
|
|
#define ASPM_STATE_L0S_UP (1) /* Upstream direction L0s state */
|
|
|
|
#define ASPM_STATE_L0S_DW (2) /* Downstream direction L0s state */
|
|
|
|
#define ASPM_STATE_L1 (4) /* L1 state */
|
|
|
|
#define ASPM_STATE_L0S (ASPM_STATE_L0S_UP | ASPM_STATE_L0S_DW)
|
|
|
|
#define ASPM_STATE_ALL (ASPM_STATE_L0S | ASPM_STATE_L1)
|
|
|
|
|
2009-05-13 11:14:58 +08:00
|
|
|
struct aspm_latency {
|
|
|
|
u32 l0s; /* L0s latency (nsec) */
|
|
|
|
u32 l1; /* L1 latency (nsec) */
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
struct pcie_link_state {
|
2009-05-13 11:17:04 +08:00
|
|
|
struct pci_dev *pdev; /* Upstream component of the Link */
|
2009-05-13 11:23:57 +08:00
|
|
|
struct pcie_link_state *root; /* pointer to the root port link */
|
2009-05-13 11:17:04 +08:00
|
|
|
struct pcie_link_state *parent; /* pointer to the parent Link state */
|
|
|
|
struct list_head sibling; /* node in link_list */
|
|
|
|
struct list_head children; /* list of child link states */
|
|
|
|
struct list_head link; /* node in parent's children list */
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
|
|
|
/* ASPM state */
|
2009-08-19 10:02:13 +08:00
|
|
|
u32 aspm_support:3; /* Supported ASPM state */
|
|
|
|
u32 aspm_enabled:3; /* Enabled ASPM state */
|
|
|
|
u32 aspm_capable:3; /* Capable ASPM state with latency */
|
|
|
|
u32 aspm_default:3; /* Default ASPM state by BIOS */
|
|
|
|
u32 aspm_disable:3; /* Disabled ASPM state */
|
2009-05-13 11:12:43 +08:00
|
|
|
|
2009-05-13 11:15:38 +08:00
|
|
|
/* Clock PM state */
|
|
|
|
u32 clkpm_capable:1; /* Clock PM capable? */
|
|
|
|
u32 clkpm_enabled:1; /* Current Clock PM state */
|
|
|
|
u32 clkpm_default:1; /* Default Clock PM state by BIOS */
|
|
|
|
|
2009-08-19 10:02:13 +08:00
|
|
|
/* Exit latencies */
|
|
|
|
struct aspm_latency latency_up; /* Upstream direction exit latency */
|
|
|
|
struct aspm_latency latency_dw; /* Downstream direction exit latency */
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
/*
|
2009-05-13 11:14:58 +08:00
|
|
|
* Endpoint acceptable latencies. A pcie downstream port only
|
|
|
|
* has one slot under it, so at most there are 8 functions.
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
*/
|
2009-05-13 11:14:58 +08:00
|
|
|
struct aspm_latency acceptable[8];
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
};
|
|
|
|
|
2008-07-23 10:32:42 +08:00
|
|
|
static int aspm_disabled, aspm_force;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
static DEFINE_MUTEX(aspm_lock);
|
|
|
|
static LIST_HEAD(link_list);
|
|
|
|
|
|
|
|
#define POLICY_DEFAULT 0 /* BIOS default setting */
|
|
|
|
#define POLICY_PERFORMANCE 1 /* high performance */
|
|
|
|
#define POLICY_POWERSAVE 2 /* high power saving */
|
|
|
|
static int aspm_policy;
|
|
|
|
static const char *policy_str[] = {
|
|
|
|
[POLICY_DEFAULT] = "default",
|
|
|
|
[POLICY_PERFORMANCE] = "performance",
|
|
|
|
[POLICY_POWERSAVE] = "powersave"
|
|
|
|
};
|
|
|
|
|
2009-01-06 07:21:04 +08:00
|
|
|
#define LINK_RETRAIN_TIMEOUT HZ
|
|
|
|
|
2009-05-13 11:17:44 +08:00
|
|
|
static int policy_to_aspm_state(struct pcie_link_state *link)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
{
|
|
|
|
switch (aspm_policy) {
|
|
|
|
case POLICY_PERFORMANCE:
|
|
|
|
/* Disable ASPM and Clock PM */
|
|
|
|
return 0;
|
|
|
|
case POLICY_POWERSAVE:
|
|
|
|
/* Enable ASPM L0s/L1 */
|
2009-08-19 10:02:13 +08:00
|
|
|
return ASPM_STATE_ALL;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
case POLICY_DEFAULT:
|
2009-05-13 11:17:44 +08:00
|
|
|
return link->aspm_default;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-05-13 11:17:44 +08:00
|
|
|
static int policy_to_clkpm_state(struct pcie_link_state *link)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
{
|
|
|
|
switch (aspm_policy) {
|
|
|
|
case POLICY_PERFORMANCE:
|
|
|
|
/* Disable ASPM and Clock PM */
|
|
|
|
return 0;
|
|
|
|
case POLICY_POWERSAVE:
|
|
|
|
/* Disable Clock PM */
|
|
|
|
return 1;
|
|
|
|
case POLICY_DEFAULT:
|
2009-05-13 11:17:44 +08:00
|
|
|
return link->clkpm_default;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-05-13 11:20:10 +08:00
|
|
|
static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
{
|
|
|
|
int pos;
|
|
|
|
u16 reg16;
|
2009-05-13 11:17:44 +08:00
|
|
|
struct pci_dev *child;
|
|
|
|
struct pci_bus *linkbus = link->pdev->subordinate;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2009-05-13 11:17:44 +08:00
|
|
|
list_for_each_entry(child, &linkbus->devices, bus_list) {
|
2009-11-11 13:33:30 +08:00
|
|
|
pos = pci_pcie_cap(child);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
if (!pos)
|
|
|
|
return;
|
2009-05-13 11:17:44 +08:00
|
|
|
pci_read_config_word(child, pos + PCI_EXP_LNKCTL, ®16);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
if (enable)
|
|
|
|
reg16 |= PCI_EXP_LNKCTL_CLKREQ_EN;
|
|
|
|
else
|
|
|
|
reg16 &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
|
2009-05-13 11:17:44 +08:00
|
|
|
pci_write_config_word(child, pos + PCI_EXP_LNKCTL, reg16);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
2009-05-13 11:17:44 +08:00
|
|
|
link->clkpm_enabled = !!enable;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
|
2009-05-13 11:20:10 +08:00
|
|
|
static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
|
|
|
|
{
|
|
|
|
/* Don't enable Clock PM if the link is not Clock PM capable */
|
|
|
|
if (!link->clkpm_capable && enable)
|
|
|
|
return;
|
|
|
|
/* Need nothing if the specified equals to current state */
|
|
|
|
if (link->clkpm_enabled == enable)
|
|
|
|
return;
|
|
|
|
pcie_set_clkpm_nocheck(link, enable);
|
|
|
|
}
|
|
|
|
|
2009-05-13 11:18:22 +08:00
|
|
|
static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
{
|
2009-05-13 11:17:44 +08:00
|
|
|
int pos, capable = 1, enabled = 1;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
u32 reg32;
|
|
|
|
u16 reg16;
|
2009-05-13 11:17:44 +08:00
|
|
|
struct pci_dev *child;
|
|
|
|
struct pci_bus *linkbus = link->pdev->subordinate;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
|
|
|
/* All functions should have the same cap and state, take the worst */
|
2009-05-13 11:17:44 +08:00
|
|
|
list_for_each_entry(child, &linkbus->devices, bus_list) {
|
2009-11-11 13:33:30 +08:00
|
|
|
pos = pci_pcie_cap(child);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
if (!pos)
|
|
|
|
return;
|
2009-05-13 11:17:44 +08:00
|
|
|
pci_read_config_dword(child, pos + PCI_EXP_LNKCAP, ®32);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) {
|
|
|
|
capable = 0;
|
|
|
|
enabled = 0;
|
|
|
|
break;
|
|
|
|
}
|
2009-05-13 11:17:44 +08:00
|
|
|
pci_read_config_word(child, pos + PCI_EXP_LNKCTL, ®16);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN))
|
|
|
|
enabled = 0;
|
|
|
|
}
|
2009-05-13 11:17:44 +08:00
|
|
|
link->clkpm_enabled = enabled;
|
|
|
|
link->clkpm_default = enabled;
|
2009-05-13 11:18:22 +08:00
|
|
|
link->clkpm_capable = (blacklist) ? 0 : capable;
|
2008-12-19 09:27:42 +08:00
|
|
|
}
|
|
|
|
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
/*
|
|
|
|
* pcie_aspm_configure_common_clock: check if the 2 ends of a link
|
|
|
|
* could use common clock. If they are, configure them to use the
|
|
|
|
* common clock. That will reduce the ASPM state exit latency.
|
|
|
|
*/
|
2009-05-13 11:17:44 +08:00
|
|
|
static void pcie_aspm_configure_common_clock(struct pcie_link_state *link)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
{
|
2009-05-13 11:17:44 +08:00
|
|
|
int ppos, cpos, same_clock = 1;
|
|
|
|
u16 reg16, parent_reg, child_reg[8];
|
2008-12-09 20:05:09 +08:00
|
|
|
unsigned long start_jiffies;
|
2009-05-13 11:17:44 +08:00
|
|
|
struct pci_dev *child, *parent = link->pdev;
|
|
|
|
struct pci_bus *linkbus = parent->subordinate;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
/*
|
2009-05-13 11:17:44 +08:00
|
|
|
* All functions of a slot should have the same Slot Clock
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
* Configuration, so just check one function
|
2009-05-13 11:17:44 +08:00
|
|
|
*/
|
|
|
|
child = list_entry(linkbus->devices.next, struct pci_dev, bus_list);
|
2009-11-11 13:36:52 +08:00
|
|
|
BUG_ON(!pci_is_pcie(child));
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
|
|
|
/* Check downstream component if bit Slot Clock Configuration is 1 */
|
2009-11-11 13:33:30 +08:00
|
|
|
cpos = pci_pcie_cap(child);
|
2009-05-13 11:17:44 +08:00
|
|
|
pci_read_config_word(child, cpos + PCI_EXP_LNKSTA, ®16);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
if (!(reg16 & PCI_EXP_LNKSTA_SLC))
|
|
|
|
same_clock = 0;
|
|
|
|
|
|
|
|
/* Check upstream component if bit Slot Clock Configuration is 1 */
|
2009-11-11 13:33:30 +08:00
|
|
|
ppos = pci_pcie_cap(parent);
|
2009-05-13 11:17:44 +08:00
|
|
|
pci_read_config_word(parent, ppos + PCI_EXP_LNKSTA, ®16);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
if (!(reg16 & PCI_EXP_LNKSTA_SLC))
|
|
|
|
same_clock = 0;
|
|
|
|
|
|
|
|
/* Configure downstream component, all functions */
|
2009-05-13 11:17:44 +08:00
|
|
|
list_for_each_entry(child, &linkbus->devices, bus_list) {
|
2009-11-11 13:33:30 +08:00
|
|
|
cpos = pci_pcie_cap(child);
|
2009-05-13 11:17:44 +08:00
|
|
|
pci_read_config_word(child, cpos + PCI_EXP_LNKCTL, ®16);
|
|
|
|
child_reg[PCI_FUNC(child->devfn)] = reg16;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
if (same_clock)
|
|
|
|
reg16 |= PCI_EXP_LNKCTL_CCC;
|
|
|
|
else
|
|
|
|
reg16 &= ~PCI_EXP_LNKCTL_CCC;
|
2009-05-13 11:17:44 +08:00
|
|
|
pci_write_config_word(child, cpos + PCI_EXP_LNKCTL, reg16);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Configure upstream component */
|
2009-05-13 11:17:44 +08:00
|
|
|
pci_read_config_word(parent, ppos + PCI_EXP_LNKCTL, ®16);
|
2008-12-09 20:05:09 +08:00
|
|
|
parent_reg = reg16;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
if (same_clock)
|
|
|
|
reg16 |= PCI_EXP_LNKCTL_CCC;
|
|
|
|
else
|
|
|
|
reg16 &= ~PCI_EXP_LNKCTL_CCC;
|
2009-05-13 11:17:44 +08:00
|
|
|
pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2009-05-13 11:17:44 +08:00
|
|
|
/* Retrain link */
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
reg16 |= PCI_EXP_LNKCTL_RL;
|
2009-05-13 11:17:44 +08:00
|
|
|
pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2009-05-13 11:17:44 +08:00
|
|
|
/* Wait for link training end. Break out after waiting for timeout */
|
2008-12-09 20:05:09 +08:00
|
|
|
start_jiffies = jiffies;
|
2009-01-06 07:21:04 +08:00
|
|
|
for (;;) {
|
2009-05-13 11:17:44 +08:00
|
|
|
pci_read_config_word(parent, ppos + PCI_EXP_LNKSTA, ®16);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
if (!(reg16 & PCI_EXP_LNKSTA_LT))
|
|
|
|
break;
|
2009-01-06 07:21:04 +08:00
|
|
|
if (time_after(jiffies, start_jiffies + LINK_RETRAIN_TIMEOUT))
|
|
|
|
break;
|
|
|
|
msleep(1);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
2009-05-13 11:17:44 +08:00
|
|
|
if (!(reg16 & PCI_EXP_LNKSTA_LT))
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* Training failed. Restore common clock configurations */
|
|
|
|
dev_printk(KERN_ERR, &parent->dev,
|
|
|
|
"ASPM: Could not configure common clock\n");
|
|
|
|
list_for_each_entry(child, &linkbus->devices, bus_list) {
|
2009-11-11 13:33:30 +08:00
|
|
|
cpos = pci_pcie_cap(child);
|
2009-05-13 11:17:44 +08:00
|
|
|
pci_write_config_word(child, cpos + PCI_EXP_LNKCTL,
|
|
|
|
child_reg[PCI_FUNC(child->devfn)]);
|
2008-12-09 20:05:09 +08:00
|
|
|
}
|
2009-05-13 11:17:44 +08:00
|
|
|
pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, parent_reg);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
|
2009-05-13 11:21:48 +08:00
|
|
|
/* Convert L0s latency encoding to ns */
|
|
|
|
static u32 calc_l0s_latency(u32 encoding)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
{
|
2009-05-13 11:21:48 +08:00
|
|
|
if (encoding == 0x7)
|
|
|
|
return (5 * 1000); /* > 4us */
|
|
|
|
return (64 << encoding);
|
|
|
|
}
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2009-05-13 11:21:48 +08:00
|
|
|
/* Convert L0s acceptable latency encoding to ns */
|
|
|
|
static u32 calc_l0s_acceptable(u32 encoding)
|
|
|
|
{
|
|
|
|
if (encoding == 0x7)
|
|
|
|
return -1U;
|
|
|
|
return (64 << encoding);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
|
2009-05-13 11:21:48 +08:00
|
|
|
/* Convert L1 latency encoding to ns */
|
|
|
|
static u32 calc_l1_latency(u32 encoding)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
{
|
2009-05-13 11:21:48 +08:00
|
|
|
if (encoding == 0x7)
|
|
|
|
return (65 * 1000); /* > 64us */
|
|
|
|
return (1000 << encoding);
|
|
|
|
}
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2009-05-13 11:21:48 +08:00
|
|
|
/* Convert L1 acceptable latency encoding to ns */
|
|
|
|
static u32 calc_l1_acceptable(u32 encoding)
|
|
|
|
{
|
|
|
|
if (encoding == 0x7)
|
|
|
|
return -1U;
|
|
|
|
return (1000 << encoding);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
|
2009-08-19 10:02:13 +08:00
|
|
|
struct aspm_register_info {
|
|
|
|
u32 support:2;
|
|
|
|
u32 enabled:2;
|
|
|
|
u32 latency_encoding_l0s;
|
|
|
|
u32 latency_encoding_l1;
|
|
|
|
};
|
|
|
|
|
|
|
|
static void pcie_get_aspm_reg(struct pci_dev *pdev,
|
|
|
|
struct aspm_register_info *info)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
{
|
|
|
|
int pos;
|
|
|
|
u16 reg16;
|
2009-08-19 10:02:13 +08:00
|
|
|
u32 reg32;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2009-11-11 13:33:30 +08:00
|
|
|
pos = pci_pcie_cap(pdev);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, ®32);
|
2009-08-19 10:02:13 +08:00
|
|
|
info->support = (reg32 & PCI_EXP_LNKCAP_ASPMS) >> 10;
|
|
|
|
info->latency_encoding_l0s = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12;
|
|
|
|
info->latency_encoding_l1 = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
|
2009-08-19 10:02:13 +08:00
|
|
|
info->enabled = reg16 & PCI_EXP_LNKCTL_ASPMC;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
|
2009-08-19 10:00:25 +08:00
|
|
|
static void pcie_aspm_check_latency(struct pci_dev *endpoint)
|
|
|
|
{
|
2009-08-19 10:02:13 +08:00
|
|
|
u32 latency, l1_switch_latency = 0;
|
2009-08-19 10:00:25 +08:00
|
|
|
struct aspm_latency *acceptable;
|
|
|
|
struct pcie_link_state *link;
|
|
|
|
|
|
|
|
/* Device not in D0 doesn't need latency check */
|
|
|
|
if ((endpoint->current_state != PCI_D0) &&
|
|
|
|
(endpoint->current_state != PCI_UNKNOWN))
|
|
|
|
return;
|
|
|
|
|
|
|
|
link = endpoint->bus->self->link_state;
|
|
|
|
acceptable = &link->acceptable[PCI_FUNC(endpoint->devfn)];
|
|
|
|
|
|
|
|
while (link) {
|
2009-08-19 10:02:13 +08:00
|
|
|
/* Check upstream direction L0s latency */
|
|
|
|
if ((link->aspm_capable & ASPM_STATE_L0S_UP) &&
|
|
|
|
(link->latency_up.l0s > acceptable->l0s))
|
|
|
|
link->aspm_capable &= ~ASPM_STATE_L0S_UP;
|
|
|
|
|
|
|
|
/* Check downstream direction L0s latency */
|
|
|
|
if ((link->aspm_capable & ASPM_STATE_L0S_DW) &&
|
|
|
|
(link->latency_dw.l0s > acceptable->l0s))
|
|
|
|
link->aspm_capable &= ~ASPM_STATE_L0S_DW;
|
2009-08-19 10:00:25 +08:00
|
|
|
/*
|
|
|
|
* Check L1 latency.
|
|
|
|
* Every switch on the path to root complex need 1
|
|
|
|
* more microsecond for L1. Spec doesn't mention L0s.
|
|
|
|
*/
|
2009-08-19 10:02:13 +08:00
|
|
|
latency = max_t(u32, link->latency_up.l1, link->latency_dw.l1);
|
|
|
|
if ((link->aspm_capable & ASPM_STATE_L1) &&
|
|
|
|
(latency + l1_switch_latency > acceptable->l1))
|
|
|
|
link->aspm_capable &= ~ASPM_STATE_L1;
|
2009-08-19 10:00:25 +08:00
|
|
|
l1_switch_latency += 1000;
|
|
|
|
|
|
|
|
link = link->parent;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2009-05-13 11:18:22 +08:00
|
|
|
static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
{
|
2009-05-13 11:17:44 +08:00
|
|
|
struct pci_dev *child, *parent = link->pdev;
|
|
|
|
struct pci_bus *linkbus = parent->subordinate;
|
2009-08-19 10:02:13 +08:00
|
|
|
struct aspm_register_info upreg, dwreg;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2009-05-13 11:18:22 +08:00
|
|
|
if (blacklist) {
|
2009-08-19 09:59:52 +08:00
|
|
|
/* Set enabled/disable so that we will disable ASPM later */
|
2009-08-19 10:02:13 +08:00
|
|
|
link->aspm_enabled = ASPM_STATE_ALL;
|
|
|
|
link->aspm_disable = ASPM_STATE_ALL;
|
2009-05-13 11:18:22 +08:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Configure common clock before checking latencies */
|
|
|
|
pcie_aspm_configure_common_clock(link);
|
|
|
|
|
2009-08-19 10:02:13 +08:00
|
|
|
/* Get upstream/downstream components' register state */
|
|
|
|
pcie_get_aspm_reg(parent, &upreg);
|
2009-05-13 11:17:44 +08:00
|
|
|
child = list_entry(linkbus->devices.next, struct pci_dev, bus_list);
|
2009-08-19 10:02:13 +08:00
|
|
|
pcie_get_aspm_reg(child, &dwreg);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Setup L0s state
|
|
|
|
*
|
|
|
|
* Note that we must not enable L0s in either direction on a
|
|
|
|
* given link unless components on both sides of the link each
|
|
|
|
* support L0s.
|
|
|
|
*/
|
|
|
|
if (dwreg.support & upreg.support & PCIE_LINK_STATE_L0S)
|
|
|
|
link->aspm_support |= ASPM_STATE_L0S;
|
|
|
|
if (dwreg.enabled & PCIE_LINK_STATE_L0S)
|
|
|
|
link->aspm_enabled |= ASPM_STATE_L0S_UP;
|
|
|
|
if (upreg.enabled & PCIE_LINK_STATE_L0S)
|
|
|
|
link->aspm_enabled |= ASPM_STATE_L0S_DW;
|
|
|
|
link->latency_up.l0s = calc_l0s_latency(upreg.latency_encoding_l0s);
|
|
|
|
link->latency_dw.l0s = calc_l0s_latency(dwreg.latency_encoding_l0s);
|
|
|
|
|
|
|
|
/* Setup L1 state */
|
|
|
|
if (upreg.support & dwreg.support & PCIE_LINK_STATE_L1)
|
|
|
|
link->aspm_support |= ASPM_STATE_L1;
|
|
|
|
if (upreg.enabled & dwreg.enabled & PCIE_LINK_STATE_L1)
|
|
|
|
link->aspm_enabled |= ASPM_STATE_L1;
|
|
|
|
link->latency_up.l1 = calc_l1_latency(upreg.latency_encoding_l1);
|
|
|
|
link->latency_dw.l1 = calc_l1_latency(dwreg.latency_encoding_l1);
|
2009-05-13 11:17:44 +08:00
|
|
|
|
2009-08-19 09:57:31 +08:00
|
|
|
/* Save default state */
|
|
|
|
link->aspm_default = link->aspm_enabled;
|
2009-08-19 10:00:25 +08:00
|
|
|
|
|
|
|
/* Setup initial capable state. Will be updated later */
|
|
|
|
link->aspm_capable = link->aspm_support;
|
2009-08-19 09:59:52 +08:00
|
|
|
/*
|
|
|
|
* If the downstream component has pci bridge function, don't
|
|
|
|
* do ASPM for now.
|
|
|
|
*/
|
|
|
|
list_for_each_entry(child, &linkbus->devices, bus_list) {
|
|
|
|
if (child->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
|
2009-08-19 10:02:13 +08:00
|
|
|
link->aspm_disable = ASPM_STATE_ALL;
|
2009-08-19 09:59:52 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
2009-08-19 09:57:31 +08:00
|
|
|
|
2009-08-19 10:01:37 +08:00
|
|
|
/* Get and check endpoint acceptable latencies */
|
2009-05-13 11:17:44 +08:00
|
|
|
list_for_each_entry(child, &linkbus->devices, bus_list) {
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
int pos;
|
2009-05-13 11:21:48 +08:00
|
|
|
u32 reg32, encoding;
|
2009-05-13 11:14:58 +08:00
|
|
|
struct aspm_latency *acceptable =
|
2009-05-13 11:17:44 +08:00
|
|
|
&link->acceptable[PCI_FUNC(child->devfn)];
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2009-05-13 11:17:44 +08:00
|
|
|
if (child->pcie_type != PCI_EXP_TYPE_ENDPOINT &&
|
|
|
|
child->pcie_type != PCI_EXP_TYPE_LEG_END)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
continue;
|
|
|
|
|
2009-11-11 13:33:30 +08:00
|
|
|
pos = pci_pcie_cap(child);
|
2009-05-13 11:17:44 +08:00
|
|
|
pci_read_config_dword(child, pos + PCI_EXP_DEVCAP, ®32);
|
2009-08-19 10:00:25 +08:00
|
|
|
/* Calculate endpoint L0s acceptable latency */
|
2009-05-13 11:21:48 +08:00
|
|
|
encoding = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6;
|
|
|
|
acceptable->l0s = calc_l0s_acceptable(encoding);
|
2009-08-19 10:00:25 +08:00
|
|
|
/* Calculate endpoint L1 acceptable latency */
|
|
|
|
encoding = (reg32 & PCI_EXP_DEVCAP_L1) >> 9;
|
|
|
|
acceptable->l1 = calc_l1_acceptable(encoding);
|
|
|
|
|
|
|
|
pcie_aspm_check_latency(child);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2009-08-19 10:02:13 +08:00
|
|
|
static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
{
|
|
|
|
u16 reg16;
|
2009-11-11 13:33:30 +08:00
|
|
|
int pos = pci_pcie_cap(pdev);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
|
|
|
pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
|
|
|
|
reg16 &= ~0x3;
|
2009-08-19 10:02:13 +08:00
|
|
|
reg16 |= val;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
|
|
|
|
}
|
|
|
|
|
2009-08-19 10:01:37 +08:00
|
|
|
static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
{
|
2009-08-19 10:02:13 +08:00
|
|
|
u32 upstream = 0, dwstream = 0;
|
2009-05-13 11:17:44 +08:00
|
|
|
struct pci_dev *child, *parent = link->pdev;
|
|
|
|
struct pci_bus *linkbus = parent->subordinate;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2009-08-19 09:59:52 +08:00
|
|
|
/* Nothing to do if the link is already in the requested state */
|
2009-08-19 10:01:37 +08:00
|
|
|
state &= (link->aspm_capable & ~link->aspm_disable);
|
2009-08-19 09:59:52 +08:00
|
|
|
if (link->aspm_enabled == state)
|
|
|
|
return;
|
2009-08-19 10:02:13 +08:00
|
|
|
/* Convert ASPM state to upstream/downstream ASPM register state */
|
|
|
|
if (state & ASPM_STATE_L0S_UP)
|
|
|
|
dwstream |= PCIE_LINK_STATE_L0S;
|
|
|
|
if (state & ASPM_STATE_L0S_DW)
|
|
|
|
upstream |= PCIE_LINK_STATE_L0S;
|
|
|
|
if (state & ASPM_STATE_L1) {
|
|
|
|
upstream |= PCIE_LINK_STATE_L1;
|
|
|
|
dwstream |= PCIE_LINK_STATE_L1;
|
|
|
|
}
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
/*
|
2009-05-13 11:17:44 +08:00
|
|
|
* Spec 2.0 suggests all functions should be configured the
|
|
|
|
* same setting for ASPM. Enabling ASPM L1 should be done in
|
|
|
|
* upstream component first and then downstream, and vice
|
|
|
|
* versa for disabling ASPM L1. Spec doesn't mention L0S.
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
*/
|
2009-08-19 10:02:13 +08:00
|
|
|
if (state & ASPM_STATE_L1)
|
|
|
|
pcie_config_aspm_dev(parent, upstream);
|
2009-05-13 11:17:44 +08:00
|
|
|
list_for_each_entry(child, &linkbus->devices, bus_list)
|
2009-08-19 10:02:13 +08:00
|
|
|
pcie_config_aspm_dev(child, dwstream);
|
|
|
|
if (!(state & ASPM_STATE_L1))
|
|
|
|
pcie_config_aspm_dev(parent, upstream);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2009-05-13 11:17:44 +08:00
|
|
|
link->aspm_enabled = state;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
|
2009-08-19 10:01:37 +08:00
|
|
|
static void pcie_config_aspm_path(struct pcie_link_state *link)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
{
|
2009-08-19 10:01:37 +08:00
|
|
|
while (link) {
|
|
|
|
pcie_config_aspm_link(link, policy_to_aspm_state(link));
|
|
|
|
link = link->parent;
|
2008-12-19 09:27:42 +08:00
|
|
|
}
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
|
2009-05-13 11:17:44 +08:00
|
|
|
static void free_link_state(struct pcie_link_state *link)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
{
|
2009-05-13 11:17:44 +08:00
|
|
|
link->pdev->link_state = NULL;
|
|
|
|
kfree(link);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
|
2008-05-21 16:58:40 +08:00
|
|
|
static int pcie_aspm_sanity_check(struct pci_dev *pdev)
|
|
|
|
{
|
2009-05-13 11:23:09 +08:00
|
|
|
struct pci_dev *child;
|
|
|
|
int pos;
|
2008-07-23 10:32:31 +08:00
|
|
|
u32 reg32;
|
2008-05-21 16:58:40 +08:00
|
|
|
/*
|
2009-12-03 19:49:24 +08:00
|
|
|
* Some functions in a slot might not all be PCIe functions,
|
2009-05-13 11:23:09 +08:00
|
|
|
* very strange. Disable ASPM for the whole slot
|
2008-05-21 16:58:40 +08:00
|
|
|
*/
|
2009-05-13 11:23:09 +08:00
|
|
|
list_for_each_entry(child, &pdev->subordinate->devices, bus_list) {
|
2009-11-11 13:33:30 +08:00
|
|
|
pos = pci_pcie_cap(child);
|
2009-05-13 11:23:09 +08:00
|
|
|
if (!pos)
|
2008-05-21 16:58:40 +08:00
|
|
|
return -EINVAL;
|
2008-07-23 10:32:31 +08:00
|
|
|
/*
|
|
|
|
* Disable ASPM for pre-1.1 PCIe device, we follow MS to use
|
|
|
|
* RBER bit to determine if a function is 1.1 version device
|
|
|
|
*/
|
2009-05-13 11:23:09 +08:00
|
|
|
pci_read_config_dword(child, pos + PCI_EXP_DEVCAP, ®32);
|
2008-09-16 21:27:13 +08:00
|
|
|
if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) {
|
2009-05-13 11:23:09 +08:00
|
|
|
dev_printk(KERN_INFO, &child->dev, "disabling ASPM"
|
2008-10-12 18:26:12 +08:00
|
|
|
" on pre-1.1 PCIe device. You can enable it"
|
|
|
|
" with 'pcie_aspm=force'\n");
|
2008-07-23 10:32:31 +08:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
2008-05-21 16:58:40 +08:00
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-08-19 10:01:37 +08:00
|
|
|
static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev)
|
2009-05-13 11:18:22 +08:00
|
|
|
{
|
|
|
|
struct pcie_link_state *link;
|
|
|
|
|
|
|
|
link = kzalloc(sizeof(*link), GFP_KERNEL);
|
|
|
|
if (!link)
|
|
|
|
return NULL;
|
|
|
|
INIT_LIST_HEAD(&link->sibling);
|
|
|
|
INIT_LIST_HEAD(&link->children);
|
|
|
|
INIT_LIST_HEAD(&link->link);
|
|
|
|
link->pdev = pdev;
|
|
|
|
if (pdev->pcie_type == PCI_EXP_TYPE_DOWNSTREAM) {
|
|
|
|
struct pcie_link_state *parent;
|
|
|
|
parent = pdev->bus->parent->self->link_state;
|
|
|
|
if (!parent) {
|
|
|
|
kfree(link);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
link->parent = parent;
|
|
|
|
list_add(&link->link, &parent->children);
|
|
|
|
}
|
2009-05-13 11:23:57 +08:00
|
|
|
/* Setup a pointer to the root port link */
|
|
|
|
if (!link->parent)
|
|
|
|
link->root = link;
|
|
|
|
else
|
|
|
|
link->root = link->parent->root;
|
|
|
|
|
2009-05-13 11:18:22 +08:00
|
|
|
list_add(&link->sibling, &link_list);
|
|
|
|
pdev->link_state = link;
|
|
|
|
return link;
|
|
|
|
}
|
|
|
|
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
/*
|
|
|
|
* pcie_aspm_init_link_state: Initiate PCI express link state.
|
|
|
|
* It is called after the pcie and its children devices are scaned.
|
|
|
|
* @pdev: the root port or switch downstream port
|
|
|
|
*/
|
|
|
|
void pcie_aspm_init_link_state(struct pci_dev *pdev)
|
|
|
|
{
|
2009-05-13 11:18:22 +08:00
|
|
|
struct pcie_link_state *link;
|
2009-08-19 10:01:37 +08:00
|
|
|
int blacklist = !!pcie_aspm_sanity_check(pdev);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2009-11-11 13:36:52 +08:00
|
|
|
if (aspm_disabled || !pci_is_pcie(pdev) || pdev->link_state)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
return;
|
|
|
|
if (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
|
2009-05-13 11:18:22 +08:00
|
|
|
pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
return;
|
2009-05-13 11:18:22 +08:00
|
|
|
|
2009-06-08 09:27:25 +08:00
|
|
|
/* VIA has a strange chipset, root port is under a bridge */
|
|
|
|
if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT &&
|
2009-05-13 11:18:22 +08:00
|
|
|
pdev->bus->self)
|
2009-06-08 09:27:25 +08:00
|
|
|
return;
|
2009-05-13 11:18:22 +08:00
|
|
|
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
down_read(&pci_bus_sem);
|
|
|
|
if (list_empty(&pdev->subordinate->devices))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
mutex_lock(&aspm_lock);
|
2009-08-19 10:01:37 +08:00
|
|
|
link = alloc_pcie_link_state(pdev);
|
2009-05-13 11:18:22 +08:00
|
|
|
if (!link)
|
|
|
|
goto unlock;
|
|
|
|
/*
|
2009-08-19 10:01:37 +08:00
|
|
|
* Setup initial ASPM state. Note that we need to configure
|
|
|
|
* upstream links also because capable state of them can be
|
|
|
|
* update through pcie_aspm_cap_init().
|
2009-05-13 11:18:22 +08:00
|
|
|
*/
|
2009-08-19 10:01:37 +08:00
|
|
|
pcie_aspm_cap_init(link, blacklist);
|
|
|
|
pcie_config_aspm_path(link);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2009-05-13 11:18:22 +08:00
|
|
|
/* Setup initial Clock PM state */
|
2009-08-19 10:01:37 +08:00
|
|
|
pcie_clkpm_cap_init(link, blacklist);
|
|
|
|
pcie_set_clkpm(link, policy_to_clkpm_state(link));
|
2009-05-13 11:18:22 +08:00
|
|
|
unlock:
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
mutex_unlock(&aspm_lock);
|
|
|
|
out:
|
|
|
|
up_read(&pci_bus_sem);
|
|
|
|
}
|
|
|
|
|
2009-08-19 10:00:25 +08:00
|
|
|
/* Recheck latencies and update aspm_capable for links under the root */
|
|
|
|
static void pcie_update_aspm_capable(struct pcie_link_state *root)
|
|
|
|
{
|
|
|
|
struct pcie_link_state *link;
|
|
|
|
BUG_ON(root->parent);
|
|
|
|
list_for_each_entry(link, &link_list, sibling) {
|
|
|
|
if (link->root != root)
|
|
|
|
continue;
|
|
|
|
link->aspm_capable = link->aspm_support;
|
|
|
|
}
|
|
|
|
list_for_each_entry(link, &link_list, sibling) {
|
|
|
|
struct pci_dev *child;
|
|
|
|
struct pci_bus *linkbus = link->pdev->subordinate;
|
|
|
|
if (link->root != root)
|
|
|
|
continue;
|
|
|
|
list_for_each_entry(child, &linkbus->devices, bus_list) {
|
|
|
|
if ((child->pcie_type != PCI_EXP_TYPE_ENDPOINT) &&
|
|
|
|
(child->pcie_type != PCI_EXP_TYPE_LEG_END))
|
|
|
|
continue;
|
|
|
|
pcie_aspm_check_latency(child);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
/* @pdev: the endpoint device */
|
|
|
|
void pcie_aspm_exit_link_state(struct pci_dev *pdev)
|
|
|
|
{
|
|
|
|
struct pci_dev *parent = pdev->bus->self;
|
2009-08-19 10:01:37 +08:00
|
|
|
struct pcie_link_state *link, *root, *parent_link;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2009-11-11 13:36:52 +08:00
|
|
|
if (aspm_disabled || !pci_is_pcie(pdev) ||
|
|
|
|
!parent || !parent->link_state)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
return;
|
2009-08-19 10:01:37 +08:00
|
|
|
if ((parent->pcie_type != PCI_EXP_TYPE_ROOT_PORT) &&
|
|
|
|
(parent->pcie_type != PCI_EXP_TYPE_DOWNSTREAM))
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
return;
|
2009-08-19 09:58:46 +08:00
|
|
|
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
down_read(&pci_bus_sem);
|
|
|
|
mutex_lock(&aspm_lock);
|
|
|
|
/*
|
|
|
|
* All PCIe functions are in one slot, remove one function will remove
|
2009-01-29 05:59:18 +08:00
|
|
|
* the whole slot, so just wait until we are the last function left.
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
*/
|
2009-01-29 05:59:18 +08:00
|
|
|
if (!list_is_last(&pdev->bus_list, &parent->subordinate->devices))
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
goto out;
|
|
|
|
|
2009-08-19 09:58:46 +08:00
|
|
|
link = parent->link_state;
|
2009-08-19 10:00:25 +08:00
|
|
|
root = link->root;
|
2009-08-19 10:01:37 +08:00
|
|
|
parent_link = link->parent;
|
2009-08-19 09:58:46 +08:00
|
|
|
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
/* All functions are removed, so just disable ASPM for the link */
|
2009-08-19 10:01:37 +08:00
|
|
|
pcie_config_aspm_link(link, 0);
|
2009-08-19 09:58:46 +08:00
|
|
|
list_del(&link->sibling);
|
|
|
|
list_del(&link->link);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
/* Clock PM is for endpoint device */
|
2009-08-19 09:58:46 +08:00
|
|
|
free_link_state(link);
|
2009-08-19 10:00:25 +08:00
|
|
|
|
|
|
|
/* Recheck latencies and configure upstream links */
|
2009-11-06 10:25:13 +08:00
|
|
|
if (parent_link) {
|
|
|
|
pcie_update_aspm_capable(root);
|
|
|
|
pcie_config_aspm_path(parent_link);
|
|
|
|
}
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
out:
|
|
|
|
mutex_unlock(&aspm_lock);
|
|
|
|
up_read(&pci_bus_sem);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* @pdev: the root port or switch downstream port */
|
|
|
|
void pcie_aspm_pm_state_change(struct pci_dev *pdev)
|
|
|
|
{
|
2009-08-19 10:00:25 +08:00
|
|
|
struct pcie_link_state *link = pdev->link_state;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2009-11-11 13:36:52 +08:00
|
|
|
if (aspm_disabled || !pci_is_pcie(pdev) || !link)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
return;
|
2009-08-19 10:00:25 +08:00
|
|
|
if ((pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT) &&
|
|
|
|
(pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM))
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
return;
|
|
|
|
/*
|
2009-08-19 10:00:25 +08:00
|
|
|
* Devices changed PM state, we should recheck if latency
|
|
|
|
* meets all functions' requirement
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
*/
|
2009-08-19 10:00:25 +08:00
|
|
|
down_read(&pci_bus_sem);
|
|
|
|
mutex_lock(&aspm_lock);
|
|
|
|
pcie_update_aspm_capable(link->root);
|
2009-08-19 10:01:37 +08:00
|
|
|
pcie_config_aspm_path(link);
|
2009-08-19 10:00:25 +08:00
|
|
|
mutex_unlock(&aspm_lock);
|
|
|
|
up_read(&pci_bus_sem);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* pci_disable_link_state - disable pci device's link state, so the link will
|
|
|
|
* never enter specific states
|
|
|
|
*/
|
|
|
|
void pci_disable_link_state(struct pci_dev *pdev, int state)
|
|
|
|
{
|
|
|
|
struct pci_dev *parent = pdev->bus->self;
|
2009-08-19 09:59:52 +08:00
|
|
|
struct pcie_link_state *link;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2009-11-11 13:36:52 +08:00
|
|
|
if (aspm_disabled || !pci_is_pcie(pdev))
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
return;
|
|
|
|
if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
|
|
|
|
pdev->pcie_type == PCI_EXP_TYPE_DOWNSTREAM)
|
|
|
|
parent = pdev;
|
|
|
|
if (!parent || !parent->link_state)
|
|
|
|
return;
|
|
|
|
|
|
|
|
down_read(&pci_bus_sem);
|
|
|
|
mutex_lock(&aspm_lock);
|
2009-08-19 09:59:52 +08:00
|
|
|
link = parent->link_state;
|
2009-08-19 10:02:13 +08:00
|
|
|
if (state & PCIE_LINK_STATE_L0S)
|
|
|
|
link->aspm_disable |= ASPM_STATE_L0S;
|
|
|
|
if (state & PCIE_LINK_STATE_L1)
|
|
|
|
link->aspm_disable |= ASPM_STATE_L1;
|
2009-08-19 10:01:37 +08:00
|
|
|
pcie_config_aspm_link(link, policy_to_aspm_state(link));
|
|
|
|
|
2009-05-13 11:20:10 +08:00
|
|
|
if (state & PCIE_LINK_STATE_CLKPM) {
|
2009-08-19 09:59:52 +08:00
|
|
|
link->clkpm_capable = 0;
|
|
|
|
pcie_set_clkpm(link, 0);
|
2009-05-13 11:20:10 +08:00
|
|
|
}
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
mutex_unlock(&aspm_lock);
|
|
|
|
up_read(&pci_bus_sem);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(pci_disable_link_state);
|
|
|
|
|
|
|
|
static int pcie_aspm_set_policy(const char *val, struct kernel_param *kp)
|
|
|
|
{
|
|
|
|
int i;
|
2009-08-19 10:01:37 +08:00
|
|
|
struct pcie_link_state *link;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(policy_str); i++)
|
|
|
|
if (!strncmp(val, policy_str[i], strlen(policy_str[i])))
|
|
|
|
break;
|
|
|
|
if (i >= ARRAY_SIZE(policy_str))
|
|
|
|
return -EINVAL;
|
|
|
|
if (i == aspm_policy)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
down_read(&pci_bus_sem);
|
|
|
|
mutex_lock(&aspm_lock);
|
|
|
|
aspm_policy = i;
|
2009-08-19 10:01:37 +08:00
|
|
|
list_for_each_entry(link, &link_list, sibling) {
|
|
|
|
pcie_config_aspm_link(link, policy_to_aspm_state(link));
|
|
|
|
pcie_set_clkpm(link, policy_to_clkpm_state(link));
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
mutex_unlock(&aspm_lock);
|
|
|
|
up_read(&pci_bus_sem);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pcie_aspm_get_policy(char *buffer, struct kernel_param *kp)
|
|
|
|
{
|
|
|
|
int i, cnt = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(policy_str); i++)
|
|
|
|
if (i == aspm_policy)
|
|
|
|
cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]);
|
|
|
|
else
|
|
|
|
cnt += sprintf(buffer + cnt, "%s ", policy_str[i]);
|
|
|
|
return cnt;
|
|
|
|
}
|
|
|
|
|
|
|
|
module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy,
|
|
|
|
NULL, 0644);
|
|
|
|
|
|
|
|
#ifdef CONFIG_PCIEASPM_DEBUG
|
|
|
|
static ssize_t link_state_show(struct device *dev,
|
|
|
|
struct device_attribute *attr,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
struct pci_dev *pci_device = to_pci_dev(dev);
|
|
|
|
struct pcie_link_state *link_state = pci_device->link_state;
|
|
|
|
|
2009-05-13 11:12:43 +08:00
|
|
|
return sprintf(buf, "%d\n", link_state->aspm_enabled);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t link_state_store(struct device *dev,
|
|
|
|
struct device_attribute *attr,
|
|
|
|
const char *buf,
|
|
|
|
size_t n)
|
|
|
|
{
|
2009-05-13 11:17:44 +08:00
|
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
2009-08-19 10:01:37 +08:00
|
|
|
struct pcie_link_state *link, *root = pdev->link_state->root;
|
2009-08-19 10:02:13 +08:00
|
|
|
u32 val = buf[0] - '0', state = 0;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2009-08-19 10:02:13 +08:00
|
|
|
if (n < 1 || val > 3)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
return -EINVAL;
|
|
|
|
|
2009-08-19 10:02:13 +08:00
|
|
|
/* Convert requested state to ASPM state */
|
|
|
|
if (val & PCIE_LINK_STATE_L0S)
|
|
|
|
state |= ASPM_STATE_L0S;
|
|
|
|
if (val & PCIE_LINK_STATE_L1)
|
|
|
|
state |= ASPM_STATE_L1;
|
|
|
|
|
2009-08-19 10:01:37 +08:00
|
|
|
down_read(&pci_bus_sem);
|
|
|
|
mutex_lock(&aspm_lock);
|
|
|
|
list_for_each_entry(link, &link_list, sibling) {
|
|
|
|
if (link->root != root)
|
|
|
|
continue;
|
|
|
|
pcie_config_aspm_link(link, state);
|
|
|
|
}
|
|
|
|
mutex_unlock(&aspm_lock);
|
|
|
|
up_read(&pci_bus_sem);
|
|
|
|
return n;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t clk_ctl_show(struct device *dev,
|
|
|
|
struct device_attribute *attr,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
struct pci_dev *pci_device = to_pci_dev(dev);
|
|
|
|
struct pcie_link_state *link_state = pci_device->link_state;
|
|
|
|
|
2009-05-13 11:15:38 +08:00
|
|
|
return sprintf(buf, "%d\n", link_state->clkpm_enabled);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t clk_ctl_store(struct device *dev,
|
|
|
|
struct device_attribute *attr,
|
|
|
|
const char *buf,
|
|
|
|
size_t n)
|
|
|
|
{
|
2009-05-13 11:20:10 +08:00
|
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
int state;
|
|
|
|
|
|
|
|
if (n < 1)
|
|
|
|
return -EINVAL;
|
|
|
|
state = buf[0]-'0';
|
|
|
|
|
|
|
|
down_read(&pci_bus_sem);
|
|
|
|
mutex_lock(&aspm_lock);
|
2009-05-13 11:20:10 +08:00
|
|
|
pcie_set_clkpm_nocheck(pdev->link_state, !!state);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
mutex_unlock(&aspm_lock);
|
|
|
|
up_read(&pci_bus_sem);
|
|
|
|
|
|
|
|
return n;
|
|
|
|
}
|
|
|
|
|
|
|
|
static DEVICE_ATTR(link_state, 0644, link_state_show, link_state_store);
|
|
|
|
static DEVICE_ATTR(clk_ctl, 0644, clk_ctl_show, clk_ctl_store);
|
|
|
|
|
|
|
|
static char power_group[] = "power";
|
|
|
|
void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev)
|
|
|
|
{
|
|
|
|
struct pcie_link_state *link_state = pdev->link_state;
|
|
|
|
|
2009-11-11 13:36:52 +08:00
|
|
|
if (!pci_is_pcie(pdev) ||
|
|
|
|
(pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
|
|
|
|
pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) || !link_state)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
return;
|
|
|
|
|
2009-05-13 11:12:43 +08:00
|
|
|
if (link_state->aspm_support)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
sysfs_add_file_to_group(&pdev->dev.kobj,
|
|
|
|
&dev_attr_link_state.attr, power_group);
|
2009-05-13 11:15:38 +08:00
|
|
|
if (link_state->clkpm_capable)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
sysfs_add_file_to_group(&pdev->dev.kobj,
|
|
|
|
&dev_attr_clk_ctl.attr, power_group);
|
|
|
|
}
|
|
|
|
|
|
|
|
void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev)
|
|
|
|
{
|
|
|
|
struct pcie_link_state *link_state = pdev->link_state;
|
|
|
|
|
2009-11-11 13:36:52 +08:00
|
|
|
if (!pci_is_pcie(pdev) ||
|
|
|
|
(pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
|
|
|
|
pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) || !link_state)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
return;
|
|
|
|
|
2009-05-13 11:12:43 +08:00
|
|
|
if (link_state->aspm_support)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
sysfs_remove_file_from_group(&pdev->dev.kobj,
|
|
|
|
&dev_attr_link_state.attr, power_group);
|
2009-05-13 11:15:38 +08:00
|
|
|
if (link_state->clkpm_capable)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
sysfs_remove_file_from_group(&pdev->dev.kobj,
|
|
|
|
&dev_attr_clk_ctl.attr, power_group);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static int __init pcie_aspm_disable(char *str)
|
|
|
|
{
|
2008-07-23 10:32:42 +08:00
|
|
|
if (!strcmp(str, "off")) {
|
|
|
|
aspm_disabled = 1;
|
|
|
|
printk(KERN_INFO "PCIe ASPM is disabled\n");
|
|
|
|
} else if (!strcmp(str, "force")) {
|
|
|
|
aspm_force = 1;
|
|
|
|
printk(KERN_INFO "PCIe ASPM is forcedly enabled\n");
|
|
|
|
}
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
2008-07-23 10:32:42 +08:00
|
|
|
__setup("pcie_aspm=", pcie_aspm_disable);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|
2008-07-23 10:32:24 +08:00
|
|
|
void pcie_no_aspm(void)
|
|
|
|
{
|
2008-07-23 10:32:42 +08:00
|
|
|
if (!aspm_force)
|
|
|
|
aspm_disabled = 1;
|
2008-07-23 10:32:24 +08:00
|
|
|
}
|
|
|
|
|
2008-11-11 06:30:55 +08:00
|
|
|
/**
|
|
|
|
* pcie_aspm_enabled - is PCIe ASPM enabled?
|
|
|
|
*
|
|
|
|
* Returns true if ASPM has not been disabled by the command-line option
|
|
|
|
* pcie_aspm=off.
|
|
|
|
**/
|
|
|
|
int pcie_aspm_enabled(void)
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
{
|
2008-11-11 06:30:55 +08:00
|
|
|
return !aspm_disabled;
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
}
|
2008-11-11 06:30:55 +08:00
|
|
|
EXPORT_SYMBOL(pcie_aspm_enabled);
|
PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
|
|
|
|