openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/net/wireless/ath/ath9k/Makefile

67 lines
1.3 KiB
Makefile
Raw Normal View History

ath9k: move hw code to its own module hw code for Atheros 802.11n hardware is commmon between different chipsets. This moves this code into a separate module, the next expected user of this code will be the ath9k_htc module. The ath9k/ dir is now selected by ATH9K_HW, an option which gets selected by either ath9k or ath9k_htc, but remains invisible for user menuconfig configuration. If either ath9k or ath9k_htc will be compiled into the kernel ath9k_hw will also be compiled in. Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-24 11:07:00 +08:00
ath9k-y += beacon.o \
ath9k: Add a new file for GPIO Move all LED/RFKILL/BTCOEX related code to gpio.c Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-08 13:06:00 +08:00
gpio.o \
ath9k: Add new file init.c Move initialization/de-initialization related code to this file. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-08 13:06:02 +08:00
init.o \
ath9k: Add new Atheros IEEE 802.11n driver This adds the new mac80211 11n ath9k Atheros driver. Only STA support is currently enabled and tested. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Jack Howarth <howarth@bromo.msbb.uc.edu> Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:16:41 +08:00
main.o \
recv.o \
ath9k: Group link monitoring logic Add link.c and move all the link/connection monitoring code to it. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04 22:53:37 +08:00
xmit.o \
ath9k: Move LNA code to antenna.c And use a helper function to setup antennae after a reset. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04 22:53:49 +08:00
link.o \
antenna.o
ath9k: Add new Atheros IEEE 802.11n driver This adds the new mac80211 11n ath9k Atheros driver. Only STA support is currently enabled and tested. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Jack Howarth <howarth@bromo.msbb.uc.edu> Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:16:41 +08:00
ath9k: Use CONFIG_ATH9K_BTCOEX_SUPPORT This patch uses CONFIG_ATH9K_BTCOEX_SUPPORT to conditionally compile btcoex-related code in the driver core. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22 15:10:44 +08:00
ath9k-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += mci.o
ath9k: Use minstrel rate control by default The ath9k rate control algorithm has various architectural issues that make it a poor fit in scenarios like congested environments etc. An example: https://bugzilla.redhat.com/show_bug.cgi?id=927191 Change the default to minstrel which is more robust in such cases. The ath9k RC code is left in the driver for now, maybe it can be removed altogether later on. Cc: stable@vger.kernel.org Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-06 12:36:29 +08:00
ath9k-$(CONFIG_ATH9K_LEGACY_RATE_CONTROL) += rc.o
ath9k: introduce ATH9K_{PCI,AHB} config options Currently ath9k only available in menuconfig if PCI bus support is enabled. However the driver is required for the built-in wireless MACs of the Atheros AR9130/AR9132 SoCs. These SoCs have no PCI controller, the wireless MAC is connected to the AHB bus on them. Introduce separated config options for the supported buses, in order to allow building of ath9h without PCI bus support. As a bonus, this patch removes the cross-reference of the ATHEROS_AR71XX option which is not present in the kernel. Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13 00:23:16 +08:00
ath9k-$(CONFIG_ATH9K_PCI) += pci.o
ath9k-$(CONFIG_ATH9K_AHB) += ahb.o
ath9k: add DFS radar pulse processing This initial DFS module provides basic functionality to deal with radar pulses reported by the Atheros DFS HW pulse detector. The reported data is evaluated and basic plausibility checks are performed to filter false pulses. Passing radar pulses are forwarded to pattern detectors which are not yet implemented. (Some modifications to actually use ATH9K_DFS_DEBUGFS based on comments from Julian Calaby <julian.calaby@gmail.com>. -- JWL) Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15 12:16:34 +08:00
ath9k-$(CONFIG_ATH9K_DFS_DEBUGFS) += dfs_debug.o
ath9k: Fix TX99 config option usage Use CONFIG_ATH9K_TX99 to properly enclose the tx99 code and make sure that it is not compiled as part of the driver when it is not selected. Move the tx99 code to a new file tx99.c and also add ATH9K_DEBUGFS as a dependency in Kconfig. This reduces the module size on platforms like OpenWrt where ATH9K_DEBUGFS is selected, but TX99 might be disabled. Cc: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-24 14:34:39 +08:00
ath9k-$(CONFIG_ATH9K_DFS_CERTIFIED) += dfs.o
ath9k-$(CONFIG_ATH9K_TX99) += tx99.o
ath9k: Use CONFIG_ATH9K_WOW Move the WoW code to wow.c and compile it conditionally based on CONFIG_ATH9K_WOW. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-28 14:52:04 +08:00
ath9k-$(CONFIG_ATH9K_WOW) += wow.o
ath9k: Add ATH9K_DEBUG configuration option Make debugging configurable, and add a module parameter to give the debug mask. Add debug.c to hold all debug specific code. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-29 00:49:02 +08:00
ath9k: Cleanup spectral scan code * Move definitions to spectral.h * Move processing/debug code to spectral.c Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18 12:23:18 +08:00
ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o \
spectral.o
ath9k: Add new Atheros IEEE 802.11n driver This adds the new mac80211 11n ath9k Atheros driver. Only STA support is currently enabled and tested. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Jack Howarth <howarth@bromo.msbb.uc.edu> Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:16:41 +08:00
obj-$(CONFIG_ATH9K) += ath9k.o
ath9k: move hw code to its own module hw code for Atheros 802.11n hardware is commmon between different chipsets. This moves this code into a separate module, the next expected user of this code will be the ath9k_htc module. The ath9k/ dir is now selected by ATH9K_HW, an option which gets selected by either ath9k or ath9k_htc, but remains invisible for user menuconfig configuration. If either ath9k or ath9k_htc will be compiled into the kernel ath9k_hw will also be compiled in. Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-24 11:07:00 +08:00
ath9k_hw: split the generic hardware code by hardware family Move out the generic hardware family code out into their own files, we have one for AR5008, AR9001, and AR9002 family (ar9002_hw.c) and another file for the new AR9003 hardware family (ar9003_hw.c). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16 05:39:03 +08:00
ath9k_hw-y:= \
ar9002_hw.o \
ar9003_hw.o \
hw.o \
ath9k_hw: Add AR9003 PHY support This add stubs for PHY support for the AR9003 hardware family. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16 05:38:19 +08:00
ar9003_phy.o \
ath9k_hw: Move some RF ops to the private callbacks The PHY split is easier done in a few steps. First move the RF ops to the private ops and rename them accordingly. We split PHY stuff up first for the AR5008 and AR9002 families. There are some callbacks that AR9002 share with the AR5008 familiy so we set those first, if AR9002 has some different callbacks it will override them upon hardware init. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16 05:38:14 +08:00
ar9002_phy.o \
ar5008_phy.o \
ath9k_hw: split calib code by hardware families Calibration code touches phy registers and since these change the calibration code needs to be abstracted. Noise floor calibration is the only thing remaining but since the remaining calls only touch the AR_PHY_AGC_CONTROL register we'll just define that register conditionally, that will be done separately. The goal is to remove the dependency of ar9002_phy.h on calib.c This also adds stubs to be filled for AR9003 calibration code. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16 05:39:00 +08:00
ar9002_calib.o \
ar9003_calib.o \
ath9k_hw: Add radio retention support for AR9480 Supported calibrations of radio retention table (RTT) are - DC offset - Filter - Peak detect Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-13 13:30:41 +08:00
ar9003_rtt.o \
ath9k_hw: split calib code by hardware families Calibration code touches phy registers and since these change the calibration code needs to be abstracted. Noise floor calibration is the only thing remaining but since the remaining calls only touch the AR_PHY_AGC_CONTROL register we'll just define that register conditionally, that will be done separately. The goal is to remove the dependency of ar9002_phy.h on calib.c This also adds stubs to be filled for AR9003 calibration code. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16 05:39:00 +08:00
calib.o \
ath9k: move hw code to its own module hw code for Atheros 802.11n hardware is commmon between different chipsets. This moves this code into a separate module, the next expected user of this code will be the ath9k_htc module. The ath9k/ dir is now selected by ATH9K_HW, an option which gets selected by either ath9k or ath9k_htc, but remains invisible for user menuconfig configuration. If either ath9k or ath9k_htc will be compiled into the kernel ath9k_hw will also be compiled in. Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-24 11:07:00 +08:00
eeprom.o \
eeprom_def.o \
eeprom_4k.o \
eeprom_9287.o \
ani.o \
mac.o \
ath9k_hw: move AR9002 mac ops to its own file Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16 05:39:28 +08:00
ar9002_mac.o \
ath9k_hw: Implement AR9003 eeprom callbacks Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16 05:39:14 +08:00
ar9003_mac.o \
ath9k_hw: add functions for controlling PA predistortion calibration Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-12 12:34:00 +08:00
ar9003_eeprom.o \
ath9k_hw: Use CONFIG_ATH9K_BTCOEX_SUPPORT Make use of CONFIG_ATH9K_BTCOEX_SUPPORT in ath9k_hw to provide a clean way of compilation without BTCOEX support. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22 20:25:47 +08:00
ar9003_paprd.o
ath9k: move hw code to its own module hw code for Atheros 802.11n hardware is commmon between different chipsets. This moves this code into a separate module, the next expected user of this code will be the ath9k_htc module. The ath9k/ dir is now selected by ATH9K_HW, an option which gets selected by either ath9k or ath9k_htc, but remains invisible for user menuconfig configuration. If either ath9k or ath9k_htc will be compiled into the kernel ath9k_hw will also be compiled in. Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-24 11:07:00 +08:00
ath9k: Use CONFIG_ATH9K_WOW Move the WoW code to wow.c and compile it conditionally based on CONFIG_ATH9K_WOW. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-28 14:52:04 +08:00
ath9k_hw-$(CONFIG_ATH9K_WOW) += ar9003_wow.o
ath9k: Fix wow.c compilation The HW routines to set various WoW registers are present in wow.c. For some reason, it has been compiled as part of the main ath9k.ko module all this time, when it should really be part of ath9k_hw.ko. This patch renames the file to ar9003_wow.ko and adds it to ath9k_hw.ko. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-28 14:17:43 +08:00
ath9k_hw: Use CONFIG_ATH9K_BTCOEX_SUPPORT Make use of CONFIG_ATH9K_BTCOEX_SUPPORT in ath9k_hw to provide a clean way of compilation without BTCOEX support. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22 20:25:47 +08:00
ath9k_hw-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += btcoex.o \
ar9003_mci.o
ath9k: move hw code to its own module hw code for Atheros 802.11n hardware is commmon between different chipsets. This moves this code into a separate module, the next expected user of this code will be the ath9k_htc module. The ath9k/ dir is now selected by ATH9K_HW, an option which gets selected by either ath9k or ath9k_htc, but remains invisible for user menuconfig configuration. If either ath9k or ath9k_htc will be compiled into the kernel ath9k_hw will also be compiled in. Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-24 11:07:00 +08:00
obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
ath9k_common: add new module to share 802.11n driver helpers ath9k and ath9k_htc share a lot of common hardware characteristics. They only differ in that ath9k_htc works with a target CPU and ath9k works directly with the hardware. ath9k_htc will do *some* things in the firmware, but a lot of others on the host. The common 802.11n hardware code is already shared through the ath9k_hw module. Common helpers amongst all Atheros drivers can use the ath module, this includes ath5k and ar9170 as users. But there is some common driver specific helpers which are not exactly hardware code which ath9k and ath9k_htc can share. We'll be using ath9k_common for this to avoid bloating the ath module and the common 802.11n hardware module ath9k_hw. We start by sharing skb pre and post processing in preparation for a hand off to mac80211. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06 00:44:39 +08:00
obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
ath9k_common-y:= common.o
ath9k_htc: Support for AR9271 chipset. Features: * Station mode * IBSS mode * Monitor mode * Legacy support * HT support * TX/RX 11n Aggregation * HW encryption * LED * Suspend/Resume For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-17 16:55:25 +08:00
ath9k_htc-y += htc_hst.o \
hif_usb.o \
wmi.o \
htc_drv_txrx.o \
htc_drv_main.o \
htc_drv_beacon.o \
ath9k_htc: Add support for bluetooth coexistence. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-18 22:27:49 +08:00
htc_drv_init.o \
htc_drv_gpio.o
ath9k_htc: Support for AR9271 chipset. Features: * Station mode * IBSS mode * Monitor mode * Legacy support * HT support * TX/RX 11n Aggregation * HW encryption * LED * Suspend/Resume For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-17 16:55:25 +08:00
ath9k_htc: Move debug code to a separate file Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13 13:54:00 +08:00
ath9k_htc-$(CONFIG_ATH9K_HTC_DEBUGFS) += htc_drv_debug.o
ath9k_htc: Support for AR9271 chipset. Features: * Station mode * IBSS mode * Monitor mode * Legacy support * HT support * TX/RX 11n Aggregation * HW encryption * LED * Suspend/Resume For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-17 16:55:25 +08:00
obj-$(CONFIG_ATH9K_HTC) += ath9k_htc.o