openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/clk/bcm/clk-bcm281xx.c

376 lines
9.5 KiB
C
Raw Normal View History

clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
/*
* Copyright (C) 2013 Broadcom Corporation
* Copyright 2013 Linaro Limited
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "clk-kona.h"
#include "dt-bindings/clock/bcm281xx.h"
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:40 +08:00
#define BCM281XX_CCU_COMMON(_name, _ucase_name) \
KONA_CCU_COMMON(BCM281XX, _name, _ucase_name)
/* Root CCU */
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
static struct peri_clk_data frac_1m_data = {
.gate = HW_SW_GATE(0x214, 16, 0, 1),
.trig = TRIGGER(0x0e04, 0),
.div = FRAC_DIVIDER(0x0e00, 0, 22, 16),
.clocks = CLOCKS("ref_crystal"),
};
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:40 +08:00
static struct ccu_data root_ccu_data = {
BCM281XX_CCU_COMMON(root, ROOT),
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
.kona_clks = {
[BCM281XX_ROOT_CCU_FRAC_1M] =
KONA_CLK(root, frac_1m, peri),
[BCM281XX_ROOT_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
},
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:40 +08:00
};
/* AON CCU */
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
static struct peri_clk_data hub_timer_data = {
.gate = HW_SW_GATE(0x0414, 16, 0, 1),
.clocks = CLOCKS("bbl_32k",
"frac_1m",
"dft_19_5m"),
.sel = SELECTOR(0x0a10, 0, 2),
.trig = TRIGGER(0x0a40, 4),
};
static struct peri_clk_data pmu_bsc_data = {
.gate = HW_SW_GATE(0x0418, 16, 0, 1),
.clocks = CLOCKS("ref_crystal",
"pmu_bsc_var",
"bbl_32k"),
.sel = SELECTOR(0x0a04, 0, 2),
.div = DIVIDER(0x0a04, 3, 4),
.trig = TRIGGER(0x0a40, 0),
};
static struct peri_clk_data pmu_bsc_var_data = {
.clocks = CLOCKS("var_312m",
"ref_312m"),
.sel = SELECTOR(0x0a00, 0, 2),
.div = DIVIDER(0x0a00, 4, 5),
.trig = TRIGGER(0x0a40, 2),
};
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:40 +08:00
static struct ccu_data aon_ccu_data = {
BCM281XX_CCU_COMMON(aon, AON),
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
.kona_clks = {
[BCM281XX_AON_CCU_HUB_TIMER] =
KONA_CLK(aon, hub_timer, peri),
[BCM281XX_AON_CCU_PMU_BSC] =
KONA_CLK(aon, pmu_bsc, peri),
[BCM281XX_AON_CCU_PMU_BSC_VAR] =
KONA_CLK(aon, pmu_bsc_var, peri),
[BCM281XX_AON_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
},
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:40 +08:00
};
/* Hub CCU */
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
static struct peri_clk_data tmon_1m_data = {
.gate = HW_SW_GATE(0x04a4, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"frac_1m"),
.sel = SELECTOR(0x0e74, 0, 2),
.trig = TRIGGER(0x0e84, 1),
};
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:40 +08:00
static struct ccu_data hub_ccu_data = {
BCM281XX_CCU_COMMON(hub, HUB),
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
.kona_clks = {
[BCM281XX_HUB_CCU_TMON_1M] =
KONA_CLK(hub, tmon_1m, peri),
[BCM281XX_HUB_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
},
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:40 +08:00
};
/* Master CCU */
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
static struct peri_clk_data sdio1_data = {
.gate = HW_SW_GATE(0x0358, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_52m",
"ref_52m",
"var_96m",
"ref_96m"),
.sel = SELECTOR(0x0a28, 0, 3),
.div = DIVIDER(0x0a28, 4, 14),
.trig = TRIGGER(0x0afc, 9),
};
static struct peri_clk_data sdio2_data = {
.gate = HW_SW_GATE(0x035c, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_52m",
"ref_52m",
"var_96m",
"ref_96m"),
.sel = SELECTOR(0x0a2c, 0, 3),
.div = DIVIDER(0x0a2c, 4, 14),
.trig = TRIGGER(0x0afc, 10),
};
static struct peri_clk_data sdio3_data = {
.gate = HW_SW_GATE(0x0364, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_52m",
"ref_52m",
"var_96m",
"ref_96m"),
.sel = SELECTOR(0x0a34, 0, 3),
.div = DIVIDER(0x0a34, 4, 14),
.trig = TRIGGER(0x0afc, 12),
};
static struct peri_clk_data sdio4_data = {
.gate = HW_SW_GATE(0x0360, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_52m",
"ref_52m",
"var_96m",
"ref_96m"),
.sel = SELECTOR(0x0a30, 0, 3),
.div = DIVIDER(0x0a30, 4, 14),
.trig = TRIGGER(0x0afc, 11),
};
static struct peri_clk_data usb_ic_data = {
.gate = HW_SW_GATE(0x0354, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_96m",
"ref_96m"),
.div = FIXED_DIVIDER(2),
.sel = SELECTOR(0x0a24, 0, 2),
.trig = TRIGGER(0x0afc, 7),
};
/* also called usbh_48m */
static struct peri_clk_data hsic2_48m_data = {
.gate = HW_SW_GATE(0x0370, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_96m",
"ref_96m"),
.sel = SELECTOR(0x0a38, 0, 2),
.div = FIXED_DIVIDER(2),
.trig = TRIGGER(0x0afc, 5),
};
/* also called usbh_12m */
static struct peri_clk_data hsic2_12m_data = {
.gate = HW_SW_GATE(0x0370, 20, 4, 5),
.div = DIVIDER(0x0a38, 12, 2),
.clocks = CLOCKS("ref_crystal",
"var_96m",
"ref_96m"),
.pre_div = FIXED_DIVIDER(2),
.sel = SELECTOR(0x0a38, 0, 2),
.trig = TRIGGER(0x0afc, 5),
};
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:40 +08:00
static struct ccu_data master_ccu_data = {
BCM281XX_CCU_COMMON(master, MASTER),
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
.kona_clks = {
[BCM281XX_MASTER_CCU_SDIO1] =
KONA_CLK(master, sdio1, peri),
[BCM281XX_MASTER_CCU_SDIO2] =
KONA_CLK(master, sdio2, peri),
[BCM281XX_MASTER_CCU_SDIO3] =
KONA_CLK(master, sdio3, peri),
[BCM281XX_MASTER_CCU_SDIO4] =
KONA_CLK(master, sdio4, peri),
[BCM281XX_MASTER_CCU_USB_IC] =
KONA_CLK(master, usb_ic, peri),
[BCM281XX_MASTER_CCU_HSIC2_48M] =
KONA_CLK(master, hsic2_48m, peri),
[BCM281XX_MASTER_CCU_HSIC2_12M] =
KONA_CLK(master, hsic2_12m, peri),
[BCM281XX_MASTER_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
},
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:40 +08:00
};
/* Slave CCU */
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
static struct peri_clk_data uartb_data = {
.gate = HW_SW_GATE(0x0400, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_156m",
"ref_156m"),
.sel = SELECTOR(0x0a10, 0, 2),
.div = FRAC_DIVIDER(0x0a10, 4, 12, 8),
.trig = TRIGGER(0x0afc, 2),
};
static struct peri_clk_data uartb2_data = {
.gate = HW_SW_GATE(0x0404, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_156m",
"ref_156m"),
.sel = SELECTOR(0x0a14, 0, 2),
.div = FRAC_DIVIDER(0x0a14, 4, 12, 8),
.trig = TRIGGER(0x0afc, 3),
};
static struct peri_clk_data uartb3_data = {
.gate = HW_SW_GATE(0x0408, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_156m",
"ref_156m"),
.sel = SELECTOR(0x0a18, 0, 2),
.div = FRAC_DIVIDER(0x0a18, 4, 12, 8),
.trig = TRIGGER(0x0afc, 4),
};
static struct peri_clk_data uartb4_data = {
.gate = HW_SW_GATE(0x0408, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_156m",
"ref_156m"),
.sel = SELECTOR(0x0a1c, 0, 2),
.div = FRAC_DIVIDER(0x0a1c, 4, 12, 8),
.trig = TRIGGER(0x0afc, 5),
};
static struct peri_clk_data ssp0_data = {
.gate = HW_SW_GATE(0x0410, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_104m",
"ref_104m",
"var_96m",
"ref_96m"),
.sel = SELECTOR(0x0a20, 0, 3),
.div = DIVIDER(0x0a20, 4, 14),
.trig = TRIGGER(0x0afc, 6),
};
static struct peri_clk_data ssp2_data = {
.gate = HW_SW_GATE(0x0418, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_104m",
"ref_104m",
"var_96m",
"ref_96m"),
.sel = SELECTOR(0x0a28, 0, 3),
.div = DIVIDER(0x0a28, 4, 14),
.trig = TRIGGER(0x0afc, 8),
};
static struct peri_clk_data bsc1_data = {
.gate = HW_SW_GATE(0x0458, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_104m",
"ref_104m",
"var_13m",
"ref_13m"),
.sel = SELECTOR(0x0a64, 0, 3),
.trig = TRIGGER(0x0afc, 23),
};
static struct peri_clk_data bsc2_data = {
.gate = HW_SW_GATE(0x045c, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_104m",
"ref_104m",
"var_13m",
"ref_13m"),
.sel = SELECTOR(0x0a68, 0, 3),
.trig = TRIGGER(0x0afc, 24),
};
static struct peri_clk_data bsc3_data = {
.gate = HW_SW_GATE(0x0484, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_104m",
"ref_104m",
"var_13m",
"ref_13m"),
.sel = SELECTOR(0x0a84, 0, 3),
.trig = TRIGGER(0x0b00, 2),
};
static struct peri_clk_data pwm_data = {
.gate = HW_SW_GATE(0x0468, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_104m"),
.sel = SELECTOR(0x0a70, 0, 2),
.div = DIVIDER(0x0a70, 4, 3),
.trig = TRIGGER(0x0afc, 15),
};
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:40 +08:00
static struct ccu_data slave_ccu_data = {
BCM281XX_CCU_COMMON(slave, SLAVE),
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
.kona_clks = {
[BCM281XX_SLAVE_CCU_UARTB] =
KONA_CLK(slave, uartb, peri),
[BCM281XX_SLAVE_CCU_UARTB2] =
KONA_CLK(slave, uartb2, peri),
[BCM281XX_SLAVE_CCU_UARTB3] =
KONA_CLK(slave, uartb3, peri),
[BCM281XX_SLAVE_CCU_UARTB4] =
KONA_CLK(slave, uartb4, peri),
[BCM281XX_SLAVE_CCU_SSP0] =
KONA_CLK(slave, ssp0, peri),
[BCM281XX_SLAVE_CCU_SSP2] =
KONA_CLK(slave, ssp2, peri),
[BCM281XX_SLAVE_CCU_BSC1] =
KONA_CLK(slave, bsc1, peri),
[BCM281XX_SLAVE_CCU_BSC2] =
KONA_CLK(slave, bsc2, peri),
[BCM281XX_SLAVE_CCU_BSC3] =
KONA_CLK(slave, bsc3, peri),
[BCM281XX_SLAVE_CCU_PWM] =
KONA_CLK(slave, pwm, peri),
[BCM281XX_SLAVE_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
},
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:40 +08:00
};
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
/* Device tree match table callback functions */
static void __init kona_dt_root_ccu_setup(struct device_node *node)
{
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
kona_dt_ccu_setup(&root_ccu_data, node);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
}
static void __init kona_dt_aon_ccu_setup(struct device_node *node)
{
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
kona_dt_ccu_setup(&aon_ccu_data, node);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
}
static void __init kona_dt_hub_ccu_setup(struct device_node *node)
{
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
kona_dt_ccu_setup(&hub_ccu_data, node);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
}
static void __init kona_dt_master_ccu_setup(struct device_node *node)
{
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
kona_dt_ccu_setup(&master_ccu_data, node);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
}
static void __init kona_dt_slave_ccu_setup(struct device_node *node)
{
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
kona_dt_ccu_setup(&slave_ccu_data, node);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
}
clk: bcm281xx: change some symbol names As I developed the bcm281xx clock code I understood there were restrictions on device tree "compatible" strings names, and as a result "bcm11351" was used in places despite the part family being more properly called "bcm281xx". This can be a little confusing. In some cases I went to far and things using "bcm11351" when that was not necessary. This patch remedies this. It renames the symbol used to define the "compatible" string (but not its value) so it uses "BCM281XX". Similarly, the name names provided to the CLK_OF_DECLARE() macro are changed, hoping to minimize the number of places that the confusing "11351" string is used. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:39 +08:00
CLK_OF_DECLARE(bcm281xx_root_ccu, BCM281XX_DT_ROOT_CCU_COMPAT,
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
kona_dt_root_ccu_setup);
clk: bcm281xx: change some symbol names As I developed the bcm281xx clock code I understood there were restrictions on device tree "compatible" strings names, and as a result "bcm11351" was used in places despite the part family being more properly called "bcm281xx". This can be a little confusing. In some cases I went to far and things using "bcm11351" when that was not necessary. This patch remedies this. It renames the symbol used to define the "compatible" string (but not its value) so it uses "BCM281XX". Similarly, the name names provided to the CLK_OF_DECLARE() macro are changed, hoping to minimize the number of places that the confusing "11351" string is used. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:39 +08:00
CLK_OF_DECLARE(bcm281xx_aon_ccu, BCM281XX_DT_AON_CCU_COMPAT,
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
kona_dt_aon_ccu_setup);
clk: bcm281xx: change some symbol names As I developed the bcm281xx clock code I understood there were restrictions on device tree "compatible" strings names, and as a result "bcm11351" was used in places despite the part family being more properly called "bcm281xx". This can be a little confusing. In some cases I went to far and things using "bcm11351" when that was not necessary. This patch remedies this. It renames the symbol used to define the "compatible" string (but not its value) so it uses "BCM281XX". Similarly, the name names provided to the CLK_OF_DECLARE() macro are changed, hoping to minimize the number of places that the confusing "11351" string is used. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:39 +08:00
CLK_OF_DECLARE(bcm281xx_hub_ccu, BCM281XX_DT_HUB_CCU_COMPAT,
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
kona_dt_hub_ccu_setup);
clk: bcm281xx: change some symbol names As I developed the bcm281xx clock code I understood there were restrictions on device tree "compatible" strings names, and as a result "bcm11351" was used in places despite the part family being more properly called "bcm281xx". This can be a little confusing. In some cases I went to far and things using "bcm11351" when that was not necessary. This patch remedies this. It renames the symbol used to define the "compatible" string (but not its value) so it uses "BCM281XX". Similarly, the name names provided to the CLK_OF_DECLARE() macro are changed, hoping to minimize the number of places that the confusing "11351" string is used. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:39 +08:00
CLK_OF_DECLARE(bcm281xx_master_ccu, BCM281XX_DT_MASTER_CCU_COMPAT,
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
kona_dt_master_ccu_setup);
clk: bcm281xx: change some symbol names As I developed the bcm281xx clock code I understood there were restrictions on device tree "compatible" strings names, and as a result "bcm11351" was used in places despite the part family being more properly called "bcm281xx". This can be a little confusing. In some cases I went to far and things using "bcm11351" when that was not necessary. This patch remedies this. It renames the symbol used to define the "compatible" string (but not its value) so it uses "BCM281XX". Similarly, the name names provided to the CLK_OF_DECLARE() macro are changed, hoping to minimize the number of places that the confusing "11351" string is used. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:39 +08:00
CLK_OF_DECLARE(bcm281xx_slave_ccu, BCM281XX_DT_SLAVE_CCU_COMPAT,
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
kona_dt_slave_ccu_setup);