linux/net/batman-adv/soft-interface.c

1028 lines
28 KiB
C
Raw Normal View History

/* Copyright (C) 2007-2013 B.A.T.M.A.N. contributors:
*
* Marek Lindner, Simon Wunderlich
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
* License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA
*/
#include "main.h"
#include "soft-interface.h"
#include "hard-interface.h"
#include "distributed-arp-table.h"
#include "routing.h"
#include "send.h"
#include "debugfs.h"
#include "translation-table.h"
#include "hash.h"
#include "gateway_common.h"
#include "gateway_client.h"
#include "sysfs.h"
#include "originator.h"
#include <linux/slab.h>
#include <linux/ethtool.h>
#include <linux/etherdevice.h>
#include <linux/if_vlan.h>
#include "bridge_loop_avoidance.h"
batman-adv: network coding - add the initial infrastructure code Network coding exploits the 802.11 shared medium to allow multiple packets to be sent in a single transmission. In brief, a relay can XOR two packets, and send the coded packet to two destinations. The receivers can decode one of the original packets by XOR'ing the coded packet with the other original packet. This will lead to increased throughput in topologies where two packets cross one relay. In a simple topology with three nodes, it takes four transmissions without network coding to get one packet from Node A to Node B and one from Node B to Node A: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <--- p2 ---- Node R Node B 4. Node A Node R ---- p1 ---> Node B With network coding, the relay only needs one transmission, which saves us one slot of valuable airtime: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <- p1 x p2 - Node R - p1 x p2 -> Node B The same principle holds for a topology including five nodes. Here the packets from Node A and Node B are overheard by Node C and Node D, respectively. This allows Node R to send a network coded packet to save one transmission: Node A Node B | \ / | | p1 p2 | | \ / | p1 > Node R < p2 | | | / \ | | p1 x p2 p1 x p2 | v / \ v / \ Node C < > Node D More information is available on the open-mesh.org wiki[1]. This patch adds the initial code to support network coding in batman-adv. It sets up a worker thread to do house keeping and adds a sysfs file to enable/disable network coding. The feature is disabled by default, as it requires a wifi-driver with working promiscuous mode, and also because it adds a small delay at each hop. [1] http://www.open-mesh.org/projects/batman-adv/wiki/Catwoman Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-25 18:12:38 +08:00
#include "network-coding.h"
static int batadv_get_settings(struct net_device *dev, struct ethtool_cmd *cmd);
static void batadv_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info);
static u32 batadv_get_msglevel(struct net_device *dev);
static void batadv_set_msglevel(struct net_device *dev, u32 value);
static u32 batadv_get_link(struct net_device *dev);
static void batadv_get_strings(struct net_device *dev, u32 stringset, u8 *data);
static void batadv_get_ethtool_stats(struct net_device *dev,
struct ethtool_stats *stats, u64 *data);
static int batadv_get_sset_count(struct net_device *dev, int stringset);
static const struct ethtool_ops batadv_ethtool_ops = {
.get_settings = batadv_get_settings,
.get_drvinfo = batadv_get_drvinfo,
.get_msglevel = batadv_get_msglevel,
.set_msglevel = batadv_set_msglevel,
.get_link = batadv_get_link,
.get_strings = batadv_get_strings,
.get_ethtool_stats = batadv_get_ethtool_stats,
.get_sset_count = batadv_get_sset_count,
};
int batadv_skb_head_push(struct sk_buff *skb, unsigned int len)
{
int result;
/* TODO: We must check if we can release all references to non-payload
* data using skb_header_release in our skbs to allow skb_cow_header to
* work optimally. This means that those skbs are not allowed to read
* or write any data which is before the current position of skb->data
* after that call and thus allow other skbs with the same data buffer
* to write freely in that area.
*/
result = skb_cow_head(skb, len);
if (result < 0)
return result;
skb_push(skb, len);
return 0;
}
static int batadv_interface_open(struct net_device *dev)
{
netif_start_queue(dev);
return 0;
}
static int batadv_interface_release(struct net_device *dev)
{
netif_stop_queue(dev);
return 0;
}
static struct net_device_stats *batadv_interface_stats(struct net_device *dev)
{
struct batadv_priv *bat_priv = netdev_priv(dev);
struct net_device_stats *stats = &bat_priv->stats;
stats->tx_packets = batadv_sum_counter(bat_priv, BATADV_CNT_TX);
stats->tx_bytes = batadv_sum_counter(bat_priv, BATADV_CNT_TX_BYTES);
stats->tx_dropped = batadv_sum_counter(bat_priv, BATADV_CNT_TX_DROPPED);
stats->rx_packets = batadv_sum_counter(bat_priv, BATADV_CNT_RX);
stats->rx_bytes = batadv_sum_counter(bat_priv, BATADV_CNT_RX_BYTES);
return stats;
}
static int batadv_interface_set_mac_addr(struct net_device *dev, void *p)
{
struct batadv_priv *bat_priv = netdev_priv(dev);
struct sockaddr *addr = p;
uint8_t old_addr[ETH_ALEN];
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
memcpy(old_addr, dev->dev_addr, ETH_ALEN);
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
/* only modify transtable if it has been initialized before */
if (atomic_read(&bat_priv->mesh_state) == BATADV_MESH_ACTIVE) {
batadv_tt_local_remove(bat_priv, old_addr, BATADV_NO_FLAGS,
"mac address changed", false);
batadv_tt_local_add(dev, addr->sa_data, BATADV_NO_FLAGS,
BATADV_NULL_IFINDEX);
}
return 0;
}
static int batadv_interface_change_mtu(struct net_device *dev, int new_mtu)
{
/* check ranges */
if ((new_mtu < 68) || (new_mtu > batadv_hardif_min_mtu(dev)))
return -EINVAL;
dev->mtu = new_mtu;
return 0;
}
/**
* batadv_interface_set_rx_mode - set the rx mode of a device
* @dev: registered network device to modify
*
* We do not actually need to set any rx filters for the virtual batman
* soft interface. However a dummy handler enables a user to set static
* multicast listeners for instance.
*/
static void batadv_interface_set_rx_mode(struct net_device *dev)
{
}
static int batadv_interface_tx(struct sk_buff *skb,
struct net_device *soft_iface)
{
struct ethhdr *ethhdr;
struct batadv_priv *bat_priv = netdev_priv(soft_iface);
struct batadv_hard_iface *primary_if = NULL;
struct batadv_bcast_packet *bcast_packet;
__be16 ethertype = htons(ETH_P_BATMAN);
static const uint8_t stp_addr[ETH_ALEN] = {0x01, 0x80, 0xC2, 0x00,
0x00, 0x00};
static const uint8_t ectp_addr[ETH_ALEN] = {0xCF, 0x00, 0x00, 0x00,
0x00, 0x00};
struct vlan_ethhdr *vhdr;
unsigned int header_len = 0;
int data_len = skb->len, ret;
unsigned long brd_delay = 1;
bool do_bcast = false, client_added;
unsigned short vid;
uint32_t seqno;
if (atomic_read(&bat_priv->mesh_state) != BATADV_MESH_ACTIVE)
goto dropped;
soft_iface->trans_start = jiffies;
vid = batadv_get_vid(skb, 0);
ethhdr = (struct ethhdr *)skb->data;
switch (ntohs(ethhdr->h_proto)) {
case ETH_P_8021Q:
vhdr = (struct vlan_ethhdr *)skb->data;
if (vhdr->h_vlan_encapsulated_proto != ethertype)
break;
/* fall through */
case ETH_P_BATMAN:
goto dropped;
}
if (batadv_bla_tx(bat_priv, skb, vid))
goto dropped;
/* skb->data might have been reallocated by batadv_bla_tx() */
ethhdr = (struct ethhdr *)skb->data;
batman-adv: improved client announcement mechanism The client announcement mechanism informs every mesh node in the network of any connected non-mesh client, in order to find the path towards that client from any given point in the mesh. The old implementation was based on the simple idea of appending a data buffer to each OGM containing all the client MAC addresses the node is serving. All other nodes can populate their global translation tables (table which links client MAC addresses to node addresses) using this MAC address buffer and linking it to the node's address contained in the OGM. A node that wants to contact a client has to lookup the node the client is connected to and its address in the global translation table. It is easy to understand that this implementation suffers from several issues: - big overhead (each and every OGM contains the entire list of connected clients) - high latencies for client route updates due to long OGM trip time and OGM losses The new implementation addresses these issues by appending client changes (new client joined or a client left) to the OGM instead of filling it with all the client addresses each time. In this way nodes can modify their global tables by means of "updates", thus reducing the overhead within the OGMs. To keep the entire network in sync each node maintains a translation table version number (ttvn) and a translation table checksum. These values are spread with the OGM to allow all the network participants to determine whether or not they need to update their translation table information. When a translation table lookup is performed in order to send a packet to a client attached to another node, the destination's ttvn is added to the payload packet. Forwarding nodes can compare the packet's ttvn with their destination's ttvn (this node could have a fresher information than the source) and re-route the packet if necessary. This greatly reduces the packet loss of clients roaming from one AP to the next. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-04-27 20:27:44 +08:00
/* Register the client MAC in the transtable */
if (!is_multicast_ether_addr(ethhdr->h_source)) {
client_added = batadv_tt_local_add(soft_iface, ethhdr->h_source,
vid, skb->skb_iif);
if (!client_added)
goto dropped;
}
/* don't accept stp packets. STP does not help in meshes.
* better use the bridge loop avoidance ...
*
* The same goes for ECTP sent at least by some Cisco Switches,
* it might confuse the mesh when used with bridge loop avoidance.
*/
if (batadv_compare_eth(ethhdr->h_dest, stp_addr))
goto dropped;
if (batadv_compare_eth(ethhdr->h_dest, ectp_addr))
goto dropped;
if (is_multicast_ether_addr(ethhdr->h_dest)) {
do_bcast = true;
switch (atomic_read(&bat_priv->gw_mode)) {
case BATADV_GW_MODE_SERVER:
/* gateway servers should not send dhcp
* requests into the mesh
*/
ret = batadv_gw_is_dhcp_target(skb, &header_len);
if (ret)
goto dropped;
break;
case BATADV_GW_MODE_CLIENT:
/* gateway clients should send dhcp requests
* via unicast to their gateway
*/
ret = batadv_gw_is_dhcp_target(skb, &header_len);
if (ret)
do_bcast = false;
break;
case BATADV_GW_MODE_OFF:
default:
break;
}
/* reminder: ethhdr might have become unusable from here on
* (batadv_gw_is_dhcp_target() might have reallocated skb data)
*/
}
batadv_skb_set_priority(skb, 0);
/* ethernet packet should be broadcasted */
if (do_bcast) {
primary_if = batadv_primary_if_get_selected(bat_priv);
if (!primary_if)
goto dropped;
/* in case of ARP request, we do not immediately broadcasti the
* packet, instead we first wait for DAT to try to retrieve the
* correct ARP entry
*/
if (batadv_dat_snoop_outgoing_arp_request(bat_priv, skb))
brd_delay = msecs_to_jiffies(ARP_REQ_DELAY);
if (batadv_skb_head_push(skb, sizeof(*bcast_packet)) < 0)
goto dropped;
bcast_packet = (struct batadv_bcast_packet *)skb->data;
bcast_packet->header.version = BATADV_COMPAT_VERSION;
bcast_packet->header.ttl = BATADV_TTL;
/* batman packet type: broadcast */
bcast_packet->header.packet_type = BATADV_BCAST;
bcast_packet->reserved = 0;
/* hw address of first interface is the orig mac because only
* this mac is known throughout the mesh
*/
memcpy(bcast_packet->orig,
primary_if->net_dev->dev_addr, ETH_ALEN);
/* set broadcast sequence number */
seqno = atomic_inc_return(&bat_priv->bcast_seqno);
bcast_packet->seqno = htonl(seqno);
batadv_add_bcast_packet_to_list(bat_priv, skb, brd_delay);
/* a copy is stored in the bcast list, therefore removing
* the original skb.
*/
kfree_skb(skb);
/* unicast packet */
} else {
if (atomic_read(&bat_priv->gw_mode) != BATADV_GW_MODE_OFF) {
ret = batadv_gw_out_of_range(bat_priv, skb);
if (ret)
goto dropped;
}
if (batadv_dat_snoop_outgoing_arp_request(bat_priv, skb))
goto dropped;
batadv_dat_snoop_outgoing_arp_reply(bat_priv, skb);
if (is_multicast_ether_addr(ethhdr->h_dest))
ret = batadv_send_skb_via_gw(bat_priv, skb, vid);
else
ret = batadv_send_skb_via_tt(bat_priv, skb, vid);
if (ret == NET_XMIT_DROP)
goto dropped_freed;
}
batadv_inc_counter(bat_priv, BATADV_CNT_TX);
batadv_add_counter(bat_priv, BATADV_CNT_TX_BYTES, data_len);
goto end;
dropped:
kfree_skb(skb);
dropped_freed:
batadv_inc_counter(bat_priv, BATADV_CNT_TX_DROPPED);
end:
if (primary_if)
batadv_hardif_free_ref(primary_if);
return NETDEV_TX_OK;
}
void batadv_interface_rx(struct net_device *soft_iface,
struct sk_buff *skb, struct batadv_hard_iface *recv_if,
int hdr_size, struct batadv_orig_node *orig_node)
{
struct batadv_header *batadv_header = (struct batadv_header *)skb->data;
struct batadv_priv *bat_priv = netdev_priv(soft_iface);
__be16 ethertype = htons(ETH_P_BATMAN);
struct vlan_ethhdr *vhdr;
struct ethhdr *ethhdr;
unsigned short vid;
bool is_bcast;
is_bcast = (batadv_header->packet_type == BATADV_BCAST);
/* check if enough space is available for pulling, and pull */
if (!pskb_may_pull(skb, hdr_size))
goto dropped;
skb_pull_rcsum(skb, hdr_size);
skb_reset_mac_header(skb);
vid = batadv_get_vid(skb, hdr_size);
ethhdr = eth_hdr(skb);
switch (ntohs(ethhdr->h_proto)) {
case ETH_P_8021Q:
vhdr = (struct vlan_ethhdr *)skb->data;
if (vhdr->h_vlan_encapsulated_proto != ethertype)
break;
/* fall through */
case ETH_P_BATMAN:
goto dropped;
}
/* skb->dev & skb->pkt_type are set here */
if (unlikely(!pskb_may_pull(skb, ETH_HLEN)))
goto dropped;
skb->protocol = eth_type_trans(skb, soft_iface);
/* should not be necessary anymore as we use skb_pull_rcsum()
* TODO: please verify this and remove this TODO
* -- Dec 21st 2009, Simon Wunderlich
*/
/* skb->ip_summed = CHECKSUM_UNNECESSARY; */
batadv_inc_counter(bat_priv, BATADV_CNT_RX);
batadv_add_counter(bat_priv, BATADV_CNT_RX_BYTES,
skb->len + ETH_HLEN);
soft_iface->last_rx = jiffies;
/* Let the bridge loop avoidance check the packet. If will
* not handle it, we can safely push it up.
*/
if (batadv_bla_rx(bat_priv, skb, vid, is_bcast))
goto out;
if (orig_node)
batadv_tt_add_temporary_global_entry(bat_priv, orig_node,
ethhdr->h_source, vid);
if (batadv_is_ap_isolated(bat_priv, ethhdr->h_source, ethhdr->h_dest,
vid))
goto dropped;
netif_rx(skb);
goto out;
dropped:
kfree_skb(skb);
out:
return;
}
/**
* batadv_softif_vlan_free_ref - decrease the vlan object refcounter and
* possibly free it
* @softif_vlan: the vlan object to release
*/
void batadv_softif_vlan_free_ref(struct batadv_softif_vlan *softif_vlan)
{
if (atomic_dec_and_test(&softif_vlan->refcount))
kfree_rcu(softif_vlan, rcu);
}
/**
* batadv_softif_vlan_get - get the vlan object for a specific vid
* @bat_priv: the bat priv with all the soft interface information
* @vid: the identifier of the vlan object to retrieve
*
* Returns the private data of the vlan matching the vid passed as argument or
* NULL otherwise. The refcounter of the returned object is incremented by 1.
*/
struct batadv_softif_vlan *batadv_softif_vlan_get(struct batadv_priv *bat_priv,
unsigned short vid)
{
struct batadv_softif_vlan *vlan_tmp, *vlan = NULL;
rcu_read_lock();
hlist_for_each_entry_rcu(vlan_tmp, &bat_priv->softif_vlan_list, list) {
if (vlan_tmp->vid != vid)
continue;
if (!atomic_inc_not_zero(&vlan_tmp->refcount))
continue;
vlan = vlan_tmp;
break;
}
rcu_read_unlock();
return vlan;
}
/**
* batadv_create_vlan - allocate the needed resources for a new vlan
* @bat_priv: the bat priv with all the soft interface information
* @vid: the VLAN identifier
*
* Returns 0 on success, a negative error otherwise.
*/
int batadv_softif_create_vlan(struct batadv_priv *bat_priv, unsigned short vid)
{
struct batadv_softif_vlan *vlan;
int err;
vlan = batadv_softif_vlan_get(bat_priv, vid);
if (vlan) {
batadv_softif_vlan_free_ref(vlan);
return -EEXIST;
}
vlan = kzalloc(sizeof(*vlan), GFP_ATOMIC);
if (!vlan)
return -ENOMEM;
vlan->vid = vid;
atomic_set(&vlan->refcount, 1);
atomic_set(&vlan->ap_isolation, 0);
err = batadv_sysfs_add_vlan(bat_priv->soft_iface, vlan);
if (err) {
kfree(vlan);
return err;
}
/* add a new TT local entry. This one will be marked with the NOPURGE
* flag
*/
batadv_tt_local_add(bat_priv->soft_iface,
bat_priv->soft_iface->dev_addr, vid,
BATADV_NULL_IFINDEX);
spin_lock_bh(&bat_priv->softif_vlan_list_lock);
hlist_add_head_rcu(&vlan->list, &bat_priv->softif_vlan_list);
spin_unlock_bh(&bat_priv->softif_vlan_list_lock);
return 0;
}
/**
* batadv_softif_destroy_vlan - remove and destroy a softif_vlan object
* @bat_priv: the bat priv with all the soft interface information
* @vlan: the object to remove
*/
static void batadv_softif_destroy_vlan(struct batadv_priv *bat_priv,
struct batadv_softif_vlan *vlan)
{
spin_lock_bh(&bat_priv->softif_vlan_list_lock);
hlist_del_rcu(&vlan->list);
spin_unlock_bh(&bat_priv->softif_vlan_list_lock);
batadv_sysfs_del_vlan(bat_priv, vlan);
/* explicitly remove the associated TT local entry because it is marked
* with the NOPURGE flag
*/
batadv_tt_local_remove(bat_priv, bat_priv->soft_iface->dev_addr,
vlan->vid, "vlan interface destroyed", false);
batadv_softif_vlan_free_ref(vlan);
}
/**
* batadv_interface_add_vid - ndo_add_vid API implementation
* @dev: the netdev of the mesh interface
* @vid: identifier of the new vlan
*
* Set up all the internal structures for handling the new vlan on top of the
* mesh interface
*
* Returns 0 on success or a negative error code in case of failure.
*/
static int batadv_interface_add_vid(struct net_device *dev, __be16 proto,
unsigned short vid)
{
struct batadv_priv *bat_priv = netdev_priv(dev);
/* only 802.1Q vlans are supported.
* batman-adv does not know how to handle other types
*/
if (proto != htons(ETH_P_8021Q))
return -EINVAL;
vid |= BATADV_VLAN_HAS_TAG;
return batadv_softif_create_vlan(bat_priv, vid);
}
/**
* batadv_interface_kill_vid - ndo_kill_vid API implementation
* @dev: the netdev of the mesh interface
* @vid: identifier of the deleted vlan
*
* Destroy all the internal structures used to handle the vlan identified by vid
* on top of the mesh interface
*
* Returns 0 on success, -EINVAL if the specified prototype is not ETH_P_8021Q
* or -ENOENT if the specified vlan id wasn't registered.
*/
static int batadv_interface_kill_vid(struct net_device *dev, __be16 proto,
unsigned short vid)
{
struct batadv_priv *bat_priv = netdev_priv(dev);
struct batadv_softif_vlan *vlan;
/* only 802.1Q vlans are supported. batman-adv does not know how to
* handle other types
*/
if (proto != htons(ETH_P_8021Q))
return -EINVAL;
vlan = batadv_softif_vlan_get(bat_priv, vid | BATADV_VLAN_HAS_TAG);
if (!vlan)
return -ENOENT;
batadv_softif_destroy_vlan(bat_priv, vlan);
/* finally free the vlan object */
batadv_softif_vlan_free_ref(vlan);
return 0;
}
/* batman-adv network devices have devices nesting below it and are a special
* "super class" of normal network devices; split their locks off into a
* separate class since they always nest.
*/
static struct lock_class_key batadv_netdev_xmit_lock_key;
static struct lock_class_key batadv_netdev_addr_lock_key;
/**
* batadv_set_lockdep_class_one - Set lockdep class for a single tx queue
* @dev: device which owns the tx queue
* @txq: tx queue to modify
* @_unused: always NULL
*/
static void batadv_set_lockdep_class_one(struct net_device *dev,
struct netdev_queue *txq,
void *_unused)
{
lockdep_set_class(&txq->_xmit_lock, &batadv_netdev_xmit_lock_key);
}
/**
* batadv_set_lockdep_class - Set txq and addr_list lockdep class
* @dev: network device to modify
*/
static void batadv_set_lockdep_class(struct net_device *dev)
{
lockdep_set_class(&dev->addr_list_lock, &batadv_netdev_addr_lock_key);
netdev_for_each_tx_queue(dev, batadv_set_lockdep_class_one, NULL);
}
/**
* batadv_softif_destroy_finish - cleans up the remains of a softif
* @work: work queue item
*
* Free the parts of the soft interface which can not be removed under
* rtnl lock (to prevent deadlock situations).
*/
static void batadv_softif_destroy_finish(struct work_struct *work)
{
struct batadv_softif_vlan *vlan;
struct batadv_priv *bat_priv;
struct net_device *soft_iface;
bat_priv = container_of(work, struct batadv_priv,
cleanup_work);
soft_iface = bat_priv->soft_iface;
/* destroy the "untagged" VLAN */
vlan = batadv_softif_vlan_get(bat_priv, BATADV_NO_FLAGS);
if (vlan) {
batadv_softif_destroy_vlan(bat_priv, vlan);
batadv_softif_vlan_free_ref(vlan);
}
batadv_sysfs_del_meshif(soft_iface);
rtnl_lock();
unregister_netdevice(soft_iface);
rtnl_unlock();
}
/**
* batadv_softif_init_late - late stage initialization of soft interface
* @dev: registered network device to modify
*
* Returns error code on failures
*/
static int batadv_softif_init_late(struct net_device *dev)
{
struct batadv_priv *bat_priv;
uint32_t random_seqno;
int ret;
size_t cnt_len = sizeof(uint64_t) * BATADV_CNT_NUM;
batadv_set_lockdep_class(dev);
bat_priv = netdev_priv(dev);
bat_priv->soft_iface = dev;
INIT_WORK(&bat_priv->cleanup_work, batadv_softif_destroy_finish);
/* batadv_interface_stats() needs to be available as soon as
* register_netdevice() has been called
*/
bat_priv->bat_counters = __alloc_percpu(cnt_len, __alignof__(uint64_t));
if (!bat_priv->bat_counters)
return -ENOMEM;
atomic_set(&bat_priv->aggregated_ogms, 1);
atomic_set(&bat_priv->bonding, 0);
#ifdef CONFIG_BATMAN_ADV_BLA
atomic_set(&bat_priv->bridge_loop_avoidance, 0);
#endif
#ifdef CONFIG_BATMAN_ADV_DAT
atomic_set(&bat_priv->distributed_arp_table, 1);
#endif
atomic_set(&bat_priv->gw_mode, BATADV_GW_MODE_OFF);
atomic_set(&bat_priv->gw_sel_class, 20);
atomic_set(&bat_priv->gw.bandwidth_down, 100);
atomic_set(&bat_priv->gw.bandwidth_up, 20);
atomic_set(&bat_priv->orig_interval, 1000);
atomic_set(&bat_priv->hop_penalty, 30);
#ifdef CONFIG_BATMAN_ADV_DEBUG
atomic_set(&bat_priv->log_level, 0);
#endif
atomic_set(&bat_priv->fragmentation, 1);
atomic_set(&bat_priv->packet_size_max, ETH_DATA_LEN);
atomic_set(&bat_priv->bcast_queue_left, BATADV_BCAST_QUEUE_LEN);
atomic_set(&bat_priv->batman_queue_left, BATADV_BATMAN_QUEUE_LEN);
atomic_set(&bat_priv->mesh_state, BATADV_MESH_INACTIVE);
atomic_set(&bat_priv->bcast_seqno, 1);
atomic_set(&bat_priv->tt.vn, 0);
atomic_set(&bat_priv->tt.local_changes, 0);
atomic_set(&bat_priv->tt.ogm_append_cnt, 0);
#ifdef CONFIG_BATMAN_ADV_BLA
atomic_set(&bat_priv->bla.num_requests, 0);
#endif
bat_priv->tt.last_changeset = NULL;
bat_priv->tt.last_changeset_len = 0;
/* randomize initial seqno to avoid collision */
get_random_bytes(&random_seqno, sizeof(random_seqno));
atomic_set(&bat_priv->frag_seqno, random_seqno);
bat_priv->primary_if = NULL;
bat_priv->num_ifaces = 0;
batman-adv: network coding - add the initial infrastructure code Network coding exploits the 802.11 shared medium to allow multiple packets to be sent in a single transmission. In brief, a relay can XOR two packets, and send the coded packet to two destinations. The receivers can decode one of the original packets by XOR'ing the coded packet with the other original packet. This will lead to increased throughput in topologies where two packets cross one relay. In a simple topology with three nodes, it takes four transmissions without network coding to get one packet from Node A to Node B and one from Node B to Node A: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <--- p2 ---- Node R Node B 4. Node A Node R ---- p1 ---> Node B With network coding, the relay only needs one transmission, which saves us one slot of valuable airtime: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <- p1 x p2 - Node R - p1 x p2 -> Node B The same principle holds for a topology including five nodes. Here the packets from Node A and Node B are overheard by Node C and Node D, respectively. This allows Node R to send a network coded packet to save one transmission: Node A Node B | \ / | | p1 p2 | | \ / | p1 > Node R < p2 | | | / \ | | p1 x p2 p1 x p2 | v / \ v / \ Node C < > Node D More information is available on the open-mesh.org wiki[1]. This patch adds the initial code to support network coding in batman-adv. It sets up a worker thread to do house keeping and adds a sysfs file to enable/disable network coding. The feature is disabled by default, as it requires a wifi-driver with working promiscuous mode, and also because it adds a small delay at each hop. [1] http://www.open-mesh.org/projects/batman-adv/wiki/Catwoman Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-25 18:12:38 +08:00
batadv_nc_init_bat_priv(bat_priv);
ret = batadv_algo_select(bat_priv, batadv_routing_algo);
if (ret < 0)
goto free_bat_counters;
ret = batadv_debugfs_add_meshif(dev);
if (ret < 0)
goto free_bat_counters;
ret = batadv_mesh_init(dev);
if (ret < 0)
goto unreg_debugfs;
return 0;
unreg_debugfs:
batadv_debugfs_del_meshif(dev);
free_bat_counters:
free_percpu(bat_priv->bat_counters);
bat_priv->bat_counters = NULL;
return ret;
}
/**
* batadv_softif_slave_add - Add a slave interface to a batadv_soft_interface
* @dev: batadv_soft_interface used as master interface
* @slave_dev: net_device which should become the slave interface
*
* Return 0 if successful or error otherwise.
*/
static int batadv_softif_slave_add(struct net_device *dev,
struct net_device *slave_dev)
{
struct batadv_hard_iface *hard_iface;
int ret = -EINVAL;
hard_iface = batadv_hardif_get_by_netdev(slave_dev);
if (!hard_iface || hard_iface->soft_iface != NULL)
goto out;
ret = batadv_hardif_enable_interface(hard_iface, dev->name);
out:
if (hard_iface)
batadv_hardif_free_ref(hard_iface);
return ret;
}
/**
* batadv_softif_slave_del - Delete a slave iface from a batadv_soft_interface
* @dev: batadv_soft_interface used as master interface
* @slave_dev: net_device which should be removed from the master interface
*
* Return 0 if successful or error otherwise.
*/
static int batadv_softif_slave_del(struct net_device *dev,
struct net_device *slave_dev)
{
struct batadv_hard_iface *hard_iface;
int ret = -EINVAL;
hard_iface = batadv_hardif_get_by_netdev(slave_dev);
if (!hard_iface || hard_iface->soft_iface != dev)
goto out;
batadv_hardif_disable_interface(hard_iface, BATADV_IF_CLEANUP_KEEP);
ret = 0;
out:
if (hard_iface)
batadv_hardif_free_ref(hard_iface);
return ret;
}
static const struct net_device_ops batadv_netdev_ops = {
.ndo_init = batadv_softif_init_late,
.ndo_open = batadv_interface_open,
.ndo_stop = batadv_interface_release,
.ndo_get_stats = batadv_interface_stats,
.ndo_vlan_rx_add_vid = batadv_interface_add_vid,
.ndo_vlan_rx_kill_vid = batadv_interface_kill_vid,
.ndo_set_mac_address = batadv_interface_set_mac_addr,
.ndo_change_mtu = batadv_interface_change_mtu,
.ndo_set_rx_mode = batadv_interface_set_rx_mode,
.ndo_start_xmit = batadv_interface_tx,
.ndo_validate_addr = eth_validate_addr,
.ndo_add_slave = batadv_softif_slave_add,
.ndo_del_slave = batadv_softif_slave_del,
};
/**
* batadv_softif_free - Deconstructor of batadv_soft_interface
* @dev: Device to cleanup and remove
*/
static void batadv_softif_free(struct net_device *dev)
{
batadv_debugfs_del_meshif(dev);
batadv_mesh_free(dev);
/* some scheduled RCU callbacks need the bat_priv struct to accomplish
* their tasks. Wait for them all to be finished before freeing the
* netdev and its private data (bat_priv)
*/
rcu_barrier();
free_netdev(dev);
}
/**
* batadv_softif_init_early - early stage initialization of soft interface
* @dev: registered network device to modify
*/
static void batadv_softif_init_early(struct net_device *dev)
{
struct batadv_priv *priv = netdev_priv(dev);
ether_setup(dev);
dev->netdev_ops = &batadv_netdev_ops;
dev->destructor = batadv_softif_free;
dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
dev->tx_queue_len = 0;
/* can't call min_mtu, because the needed variables
* have not been initialized yet
*/
dev->mtu = ETH_DATA_LEN;
/* reserve more space in the skbuff for our header */
dev->hard_header_len = batadv_max_header_len();
/* generate random address */
eth_hw_addr_random(dev);
SET_ETHTOOL_OPS(dev, &batadv_ethtool_ops);
memset(priv, 0, sizeof(*priv));
}
struct net_device *batadv_softif_create(const char *name)
{
struct net_device *soft_iface;
int ret;
soft_iface = alloc_netdev(sizeof(struct batadv_priv), name,
batadv_softif_init_early);
if (!soft_iface)
return NULL;
soft_iface->rtnl_link_ops = &batadv_link_ops;
ret = register_netdevice(soft_iface);
if (ret < 0) {
pr_err("Unable to register the batman interface '%s': %i\n",
name, ret);
free_netdev(soft_iface);
return NULL;
}
return soft_iface;
}
/**
* batadv_softif_destroy_sysfs - deletion of batadv_soft_interface via sysfs
* @soft_iface: the to-be-removed batman-adv interface
*/
void batadv_softif_destroy_sysfs(struct net_device *soft_iface)
{
struct batadv_priv *bat_priv = netdev_priv(soft_iface);
queue_work(batadv_event_workqueue, &bat_priv->cleanup_work);
}
/**
* batadv_softif_destroy_netlink - deletion of batadv_soft_interface via netlink
* @soft_iface: the to-be-removed batman-adv interface
* @head: list pointer
*/
static void batadv_softif_destroy_netlink(struct net_device *soft_iface,
struct list_head *head)
{
struct batadv_hard_iface *hard_iface;
list_for_each_entry(hard_iface, &batadv_hardif_list, list) {
if (hard_iface->soft_iface == soft_iface)
batadv_hardif_disable_interface(hard_iface,
BATADV_IF_CLEANUP_KEEP);
}
batadv_sysfs_del_meshif(soft_iface);
unregister_netdevice_queue(soft_iface, head);
}
int batadv_softif_is_valid(const struct net_device *net_dev)
{
if (net_dev->netdev_ops->ndo_start_xmit == batadv_interface_tx)
return 1;
return 0;
}
struct rtnl_link_ops batadv_link_ops __read_mostly = {
.kind = "batadv",
.priv_size = sizeof(struct batadv_priv),
.setup = batadv_softif_init_early,
.dellink = batadv_softif_destroy_netlink,
};
/* ethtool */
static int batadv_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
cmd->supported = 0;
cmd->advertising = 0;
ethtool_cmd_speed_set(cmd, SPEED_10);
cmd->duplex = DUPLEX_FULL;
cmd->port = PORT_TP;
cmd->phy_address = 0;
cmd->transceiver = XCVR_INTERNAL;
cmd->autoneg = AUTONEG_DISABLE;
cmd->maxtxpkt = 0;
cmd->maxrxpkt = 0;
return 0;
}
static void batadv_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
strlcpy(info->driver, "B.A.T.M.A.N. advanced", sizeof(info->driver));
strlcpy(info->version, BATADV_SOURCE_VERSION, sizeof(info->version));
strlcpy(info->fw_version, "N/A", sizeof(info->fw_version));
strlcpy(info->bus_info, "batman", sizeof(info->bus_info));
}
static u32 batadv_get_msglevel(struct net_device *dev)
{
return -EOPNOTSUPP;
}
static void batadv_set_msglevel(struct net_device *dev, u32 value)
{
}
static u32 batadv_get_link(struct net_device *dev)
{
return 1;
}
/* Inspired by drivers/net/ethernet/dlink/sundance.c:1702
* Declare each description string in struct.name[] to get fixed sized buffer
* and compile time checking for strings longer than ETH_GSTRING_LEN.
*/
static const struct {
const char name[ETH_GSTRING_LEN];
} batadv_counters_strings[] = {
{ "tx" },
{ "tx_bytes" },
{ "tx_dropped" },
{ "rx" },
{ "rx_bytes" },
{ "forward" },
{ "forward_bytes" },
{ "mgmt_tx" },
{ "mgmt_tx_bytes" },
{ "mgmt_rx" },
{ "mgmt_rx_bytes" },
{ "frag_tx" },
{ "frag_tx_bytes" },
{ "frag_rx" },
{ "frag_rx_bytes" },
{ "frag_fwd" },
{ "frag_fwd_bytes" },
{ "tt_request_tx" },
{ "tt_request_rx" },
{ "tt_response_tx" },
{ "tt_response_rx" },
{ "tt_roam_adv_tx" },
{ "tt_roam_adv_rx" },
#ifdef CONFIG_BATMAN_ADV_DAT
{ "dat_get_tx" },
{ "dat_get_rx" },
{ "dat_put_tx" },
{ "dat_put_rx" },
{ "dat_cached_reply_tx" },
#endif
#ifdef CONFIG_BATMAN_ADV_NC
{ "nc_code" },
{ "nc_code_bytes" },
{ "nc_recode" },
{ "nc_recode_bytes" },
{ "nc_buffer" },
{ "nc_decode" },
{ "nc_decode_bytes" },
{ "nc_decode_failed" },
{ "nc_sniffed" },
#endif
};
static void batadv_get_strings(struct net_device *dev, uint32_t stringset,
uint8_t *data)
{
if (stringset == ETH_SS_STATS)
memcpy(data, batadv_counters_strings,
sizeof(batadv_counters_strings));
}
static void batadv_get_ethtool_stats(struct net_device *dev,
struct ethtool_stats *stats,
uint64_t *data)
{
struct batadv_priv *bat_priv = netdev_priv(dev);
int i;
for (i = 0; i < BATADV_CNT_NUM; i++)
data[i] = batadv_sum_counter(bat_priv, i);
}
static int batadv_get_sset_count(struct net_device *dev, int stringset)
{
if (stringset == ETH_SS_STATS)
return BATADV_CNT_NUM;
return -EOPNOTSUPP;
}