linux/drivers/media/tuners/tda18218.c

353 lines
8.5 KiB
C
Raw Normal View History

/*
* NXP TDA18218HN silicon tuner driver
*
* Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "tda18218_priv.h"
[media] tuners: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/tuners/e4000.c:50:1: warning: 'e4000_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/e4000.c:83:1: warning: 'e4000_rd_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:66:1: warning: 'fc2580_wr_regs.constprop.1' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:98:1: warning: 'fc2580_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:57:1: warning: 'tda18212_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:90:1: warning: 'tda18212_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:60:1: warning: 'tda18218_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:92:1: warning: 'tda18218_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 17:07:42 +08:00
/* Max transfer size done by I2C transfer functions */
#define MAX_XFER_SIZE 64
/* write multiple registers */
static int tda18218_wr_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len)
{
int ret = 0, len2, remaining;
[media] tuners: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/tuners/e4000.c:50:1: warning: 'e4000_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/e4000.c:83:1: warning: 'e4000_rd_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:66:1: warning: 'fc2580_wr_regs.constprop.1' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:98:1: warning: 'fc2580_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:57:1: warning: 'tda18212_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:90:1: warning: 'tda18212_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:60:1: warning: 'tda18218_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:92:1: warning: 'tda18218_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 17:07:42 +08:00
u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg->i2c_address,
.flags = 0,
.buf = buf,
}
};
[media] tuners: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/tuners/e4000.c:50:1: warning: 'e4000_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/e4000.c:83:1: warning: 'e4000_rd_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:66:1: warning: 'fc2580_wr_regs.constprop.1' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:98:1: warning: 'fc2580_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:57:1: warning: 'tda18212_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:90:1: warning: 'tda18212_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:60:1: warning: 'tda18218_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:92:1: warning: 'tda18218_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 17:07:42 +08:00
if (1 + len > sizeof(buf)) {
dev_warn(&priv->i2c->dev,
"%s: i2c wr reg=%04x: len=%d is too big!\n",
KBUILD_MODNAME, reg, len);
return -EINVAL;
}
for (remaining = len; remaining > 0;
remaining -= (priv->cfg->i2c_wr_max - 1)) {
len2 = remaining;
if (len2 > (priv->cfg->i2c_wr_max - 1))
len2 = (priv->cfg->i2c_wr_max - 1);
msg[0].len = 1 + len2;
buf[0] = reg + len - remaining;
memcpy(&buf[1], &val[len - remaining], len2);
ret = i2c_transfer(priv->i2c, msg, 1);
if (ret != 1)
break;
}
if (ret == 1) {
ret = 0;
} else {
dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%02x " \
"len=%d\n", KBUILD_MODNAME, ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
}
/* read multiple registers */
static int tda18218_rd_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len)
{
int ret;
[media] tuners: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/tuners/e4000.c:50:1: warning: 'e4000_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/e4000.c:83:1: warning: 'e4000_rd_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:66:1: warning: 'fc2580_wr_regs.constprop.1' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:98:1: warning: 'fc2580_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:57:1: warning: 'tda18212_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:90:1: warning: 'tda18212_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:60:1: warning: 'tda18218_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:92:1: warning: 'tda18218_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 17:07:42 +08:00
u8 buf[MAX_XFER_SIZE]; /* we must start read always from reg 0x00 */
struct i2c_msg msg[2] = {
{
.addr = priv->cfg->i2c_address,
.flags = 0,
.len = 1,
.buf = "\x00",
}, {
.addr = priv->cfg->i2c_address,
.flags = I2C_M_RD,
[media] tuners: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/tuners/e4000.c:50:1: warning: 'e4000_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/e4000.c:83:1: warning: 'e4000_rd_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:66:1: warning: 'fc2580_wr_regs.constprop.1' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:98:1: warning: 'fc2580_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:57:1: warning: 'tda18212_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:90:1: warning: 'tda18212_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:60:1: warning: 'tda18218_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:92:1: warning: 'tda18218_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 17:07:42 +08:00
.len = reg + len,
.buf = buf,
}
};
[media] tuners: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/tuners/e4000.c:50:1: warning: 'e4000_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/e4000.c:83:1: warning: 'e4000_rd_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:66:1: warning: 'fc2580_wr_regs.constprop.1' uses dynamic stack allocation [enabled by default] drivers/media/tuners/fc2580.c:98:1: warning: 'fc2580_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:57:1: warning: 'tda18212_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18212.c:90:1: warning: 'tda18212_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:60:1: warning: 'tda18218_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/tuners/tda18218.c:92:1: warning: 'tda18218_rd_regs.constprop.0' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 17:07:42 +08:00
if (reg + len > sizeof(buf)) {
dev_warn(&priv->i2c->dev,
"%s: i2c wr reg=%04x: len=%d is too big!\n",
KBUILD_MODNAME, reg, len);
return -EINVAL;
}
ret = i2c_transfer(priv->i2c, msg, 2);
if (ret == 2) {
memcpy(val, &buf[reg], len);
ret = 0;
} else {
dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%02x " \
"len=%d\n", KBUILD_MODNAME, ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
}
/* write single register */
static int tda18218_wr_reg(struct tda18218_priv *priv, u8 reg, u8 val)
{
return tda18218_wr_regs(priv, reg, &val, 1);
}
/* read single register */
static int tda18218_rd_reg(struct tda18218_priv *priv, u8 reg, u8 *val)
{
return tda18218_rd_regs(priv, reg, val, 1);
}
static int tda18218_set_params(struct dvb_frontend *fe)
{
struct tda18218_priv *priv = fe->tuner_priv;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
u32 bw = c->bandwidth_hz;
int ret;
u8 buf[3], i, BP_Filter, LP_Fc;
u32 LO_Frac;
/* TODO: find out correct AGC algorithm */
u8 agc[][2] = {
{ R20_AGC11, 0x60 },
{ R23_AGC21, 0x02 },
{ R20_AGC11, 0xa0 },
{ R23_AGC21, 0x09 },
{ R20_AGC11, 0xe0 },
{ R23_AGC21, 0x0c },
{ R20_AGC11, 0x40 },
{ R23_AGC21, 0x01 },
{ R20_AGC11, 0x80 },
{ R23_AGC21, 0x08 },
{ R20_AGC11, 0xc0 },
{ R23_AGC21, 0x0b },
{ R24_AGC22, 0x1c },
{ R24_AGC22, 0x0c },
};
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
/* low-pass filter cut-off frequency */
if (bw <= 6000000) {
LP_Fc = 0;
priv->if_frequency = 3000000;
} else if (bw <= 7000000) {
LP_Fc = 1;
priv->if_frequency = 3500000;
} else {
LP_Fc = 2;
priv->if_frequency = 4000000;
}
LO_Frac = c->frequency + priv->if_frequency;
/* band-pass filter */
if (LO_Frac < 188000000)
BP_Filter = 3;
else if (LO_Frac < 253000000)
BP_Filter = 4;
else if (LO_Frac < 343000000)
BP_Filter = 5;
else
BP_Filter = 6;
buf[0] = (priv->regs[R1A_IF1] & ~7) | BP_Filter; /* BP_Filter */
buf[1] = (priv->regs[R1B_IF2] & ~3) | LP_Fc; /* LP_Fc */
buf[2] = priv->regs[R1C_AGC2B];
ret = tda18218_wr_regs(priv, R1A_IF1, buf, 3);
if (ret)
goto error;
buf[0] = (LO_Frac / 1000) >> 12; /* LO_Frac_0 */
buf[1] = (LO_Frac / 1000) >> 4; /* LO_Frac_1 */
buf[2] = (LO_Frac / 1000) << 4 |
(priv->regs[R0C_MD5] & 0x0f); /* LO_Frac_2 */
ret = tda18218_wr_regs(priv, R0A_MD3, buf, 3);
if (ret)
goto error;
buf[0] = priv->regs[R0F_MD8] | (1 << 6); /* Freq_prog_Start */
ret = tda18218_wr_regs(priv, R0F_MD8, buf, 1);
if (ret)
goto error;
buf[0] = priv->regs[R0F_MD8] & ~(1 << 6); /* Freq_prog_Start */
ret = tda18218_wr_regs(priv, R0F_MD8, buf, 1);
if (ret)
goto error;
/* trigger AGC */
for (i = 0; i < ARRAY_SIZE(agc); i++) {
ret = tda18218_wr_reg(priv, agc[i][0], agc[i][1]);
if (ret)
goto error;
}
error:
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
if (ret)
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda18218_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
{
struct tda18218_priv *priv = fe->tuner_priv;
*frequency = priv->if_frequency;
dev_dbg(&priv->i2c->dev, "%s: if_frequency=%d\n", __func__, *frequency);
return 0;
}
static int tda18218_sleep(struct dvb_frontend *fe)
{
struct tda18218_priv *priv = fe->tuner_priv;
int ret;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
/* standby */
ret = tda18218_wr_reg(priv, R17_PD1, priv->regs[R17_PD1] | (1 << 0));
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
if (ret)
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda18218_init(struct dvb_frontend *fe)
{
struct tda18218_priv *priv = fe->tuner_priv;
int ret;
/* TODO: calibrations */
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
ret = tda18218_wr_regs(priv, R00_ID, priv->regs, TDA18218_NUM_REGS);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
if (ret)
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
Revert "[media] dvb_frontend: merge duplicate dvb_tuner_ops.release implementations" While this patch sounded a good idea, unfortunately, it causes bad dependencies, as drivers that would otherwise work without the DVB core will now break: ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/tea5767.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/tea5761.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/tda827x.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/tda18218.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/qt1010.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/mt2266.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/mt20xx.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/mt2060.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/mc44s803.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/fc0013.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/fc0012.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/fc0011.ko] undefined! So, we have to revert it. Note: as the argument for the release ops changed from "int" to "void", we needed to change it at the revert patch, to avoid compilation issues like: drivers/media/tuners/tea5767.c:437:23: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] .release = tea5767_release, ^~~~~~~~~~~~~~~ This reverts commit 22a613e89825ea7a3984a968463cc6d425bd8856. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-19 06:30:51 +08:00
static void tda18218_release(struct dvb_frontend *fe)
{
kfree(fe->tuner_priv);
fe->tuner_priv = NULL;
}
static const struct dvb_tuner_ops tda18218_tuner_ops = {
.info = {
.name = "NXP TDA18218",
.frequency_min_hz = 174 * MHz,
.frequency_max_hz = 864 * MHz,
.frequency_step_hz = 1 * kHz,
},
Revert "[media] dvb_frontend: merge duplicate dvb_tuner_ops.release implementations" While this patch sounded a good idea, unfortunately, it causes bad dependencies, as drivers that would otherwise work without the DVB core will now break: ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/tea5767.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/tea5761.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/tda827x.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/tda18218.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/qt1010.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/mt2266.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/mt20xx.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/mt2060.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/mc44s803.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/fc0013.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/fc0012.ko] undefined! ERROR: "dvb_tuner_simple_release" [drivers/media/tuners/fc0011.ko] undefined! So, we have to revert it. Note: as the argument for the release ops changed from "int" to "void", we needed to change it at the revert patch, to avoid compilation issues like: drivers/media/tuners/tea5767.c:437:23: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] .release = tea5767_release, ^~~~~~~~~~~~~~~ This reverts commit 22a613e89825ea7a3984a968463cc6d425bd8856. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-19 06:30:51 +08:00
.release = tda18218_release,
.init = tda18218_init,
.sleep = tda18218_sleep,
.set_params = tda18218_set_params,
.get_if_frequency = tda18218_get_if_frequency,
};
struct dvb_frontend *tda18218_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c, struct tda18218_config *cfg)
{
struct tda18218_priv *priv = NULL;
u8 val;
int ret;
/* chip default registers values */
static u8 def_regs[] = {
0xc0, 0x88, 0x00, 0x8e, 0x03, 0x00, 0x00, 0xd0, 0x00, 0x40,
0x00, 0x00, 0x07, 0xff, 0x84, 0x09, 0x00, 0x13, 0x00, 0x00,
0x01, 0x84, 0x09, 0xf0, 0x19, 0x0a, 0x8e, 0x69, 0x98, 0x01,
0x00, 0x58, 0x10, 0x40, 0x8c, 0x00, 0x0c, 0x48, 0x85, 0xc9,
0xa7, 0x00, 0x00, 0x00, 0x30, 0x81, 0x80, 0x00, 0x39, 0x00,
0x8a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf6, 0xf6
};
priv = kzalloc(sizeof(struct tda18218_priv), GFP_KERNEL);
if (priv == NULL)
return NULL;
priv->cfg = cfg;
priv->i2c = i2c;
fe->tuner_priv = priv;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
/* check if the tuner is there */
ret = tda18218_rd_reg(priv, R00_ID, &val);
if (!ret)
dev_dbg(&priv->i2c->dev, "%s: chip id=%02x\n", __func__, val);
if (ret || val != def_regs[R00_ID]) {
kfree(priv);
return NULL;
}
dev_info(&priv->i2c->dev,
"%s: NXP TDA18218HN successfully identified\n",
KBUILD_MODNAME);
memcpy(&fe->ops.tuner_ops, &tda18218_tuner_ops,
sizeof(struct dvb_tuner_ops));
memcpy(priv->regs, def_regs, sizeof(def_regs));
/* loop-through enabled chip default register values */
if (priv->cfg->loop_through) {
priv->regs[R17_PD1] = 0xb0;
priv->regs[R18_PD2] = 0x59;
}
/* standby */
ret = tda18218_wr_reg(priv, R17_PD1, priv->regs[R17_PD1] | (1 << 0));
if (ret)
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
return fe;
}
EXPORT_SYMBOL(tda18218_attach);
MODULE_DESCRIPTION("NXP TDA18218HN silicon tuner driver");
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
MODULE_LICENSE("GPL");