openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/Documentation/devicetree/bindings/arm/omap/l3-noc.txt

23 lines
659 B
Plaintext
Raw Normal View History

ARM: OMAP2+: l3-noc: Add support for device-tree Add device-tree support for the l3-noc driver. Use platform_driver_register to defer the probing at device init time. Add documentation for the l3-noc bindings. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2011-08-12 19:52:50 +08:00
* TI - L3 Network On Chip (NoC)
This version is an implementation of the generic NoC IP
provided by Arteris.
Required properties:
- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
Should be "ti,omap4-l3-noc" for OMAP4 family
bus: omap_l3_noc: Add DRA7 interconnect error data DRA7 is distinctly different from OMAP4 in terms of masters and clock domain organization. There two main clock domains which is divided as follows: <0x44000000 0x1000000> is clk1 and clk2 is the sub clock domain <0x45000000 0x1000> is clk3 Add all the data needed to handle L3 error handling on DRA7 devices and mark clk2 as subdomain and provide a compatible flag for functionality. Other than the data difference the hardware blocks involved are essentially the same. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [nm@ti.com: bugfixes and generic improvements, documentation] Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-04-11 00:33:13 +08:00
Should be "ti,dra7-l3-noc" for DRA7 family
bus: omap_l3_noc: Add AM4372 interconnect error data Add AM4372 information to handle L3 error. AM4372 has two clk domains 100f and 200s. Provide flagmux and data associated with it. NOTE: Timeout doesn't have STDERRLOG_MAIN register. And per hardware team, L3 timeout error cannot be cleared the normal way (by setting bit 31 in STDERRLOG_MAIN), instead it may be required to do system reset. L3 error handler can't help in such scenarios. Hence indicate timeout target offset as L3_TARGET_NOT_SUPPORTED as done for undocumented bits. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2013-12-02 20:18:57 +08:00
Should be "ti,am4372-l3-noc" for AM43 family
Documentation: dt: OMAP: l3-noc: Add *reg* in required properties OMAP L3 driver needs reg address space for its operation and hence its a required property. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-02-26 19:26:11 +08:00
- reg: Contains L3 register address range for each noc domain.
ARM: OMAP2+: l3-noc: Add support for device-tree Add device-tree support for the l3-noc driver. Use platform_driver_register to defer the probing at device init time. Add documentation for the l3-noc bindings. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2011-08-12 19:52:50 +08:00
- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
Examples:
ocp {
compatible = "ti,omap4-l3-noc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
};