linux/tools/perf/util/time-utils.c

540 lines
10 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
perf tools: Move parse_nsec_time to time-utils.c Code move only; no functional change intended. Committer notes: Fix the build on Ubuntu 16.04 x86-64 cross-compiling to S/390, with this set of auto-detected features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ on ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libslang: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ on ] Where it was failing with: CC /tmp/build/perf/util/time-utils.o util/time-utils.c: In function 'parse_nsec_time': util/time-utils.c:17:13: error: implicit declaration of function 'strtoul' [-Werror=implicit-function-declaration] time_sec = strtoul(str, &end, 10); ^ util/time-utils.c:17:2: error: nested extern declaration of 'strtoul' [-Werror=nested-externs] time_sec = strtoul(str, &end, 10); ^ util/time-utils.c: In function 'perf_time__parse_str': util/time-utils.c:93:2: error: implicit declaration of function 'free' [-Werror=implicit-function-declaration] free(str); ^ util/time-utils.c:93:2: error: incompatible implicit declaration of built-in function 'free' [-Werror] util/time-utils.c:93:2: note: include '<stdlib.h>' or provide a declaration of 'free' Do as suggested and add a '#include <stdlib.h>' to get the free() and strtoul() declarations and fix the build. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-3-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:42 +08:00
#include <stdlib.h>
#include <string.h>
#include <linux/string.h>
#include <sys/time.h>
perf tools: Move parse_nsec_time to time-utils.c Code move only; no functional change intended. Committer notes: Fix the build on Ubuntu 16.04 x86-64 cross-compiling to S/390, with this set of auto-detected features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ on ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libslang: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ on ] Where it was failing with: CC /tmp/build/perf/util/time-utils.o util/time-utils.c: In function 'parse_nsec_time': util/time-utils.c:17:13: error: implicit declaration of function 'strtoul' [-Werror=implicit-function-declaration] time_sec = strtoul(str, &end, 10); ^ util/time-utils.c:17:2: error: nested extern declaration of 'strtoul' [-Werror=nested-externs] time_sec = strtoul(str, &end, 10); ^ util/time-utils.c: In function 'perf_time__parse_str': util/time-utils.c:93:2: error: implicit declaration of function 'free' [-Werror=implicit-function-declaration] free(str); ^ util/time-utils.c:93:2: error: incompatible implicit declaration of built-in function 'free' [-Werror] util/time-utils.c:93:2: note: include '<stdlib.h>' or provide a declaration of 'free' Do as suggested and add a '#include <stdlib.h>' to get the free() and strtoul() declarations and fix the build. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-3-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:42 +08:00
#include <linux/time64.h>
#include <time.h>
#include <errno.h>
#include <inttypes.h>
#include <math.h>
#include <linux/ctype.h>
#include "perf.h"
#include "debug.h"
#include "time-utils.h"
perf time-utils: Refactor time range parsing code Jiri points out that we don't need any time checking and time string parsing if the --time option is not set. That makes sense. This patch refactors the time range parsing code, move the duplicated code from perf report and perf script to time_utils and check if --time option is set before parsing the time string. This patch is no logic change expected. So the usage of --time is same as before. For example: Select the first and second 10% time slices: perf report --time 10%/1,10%/2 perf script --time 10%/1,10%/2 Select the slices from 0% to 10% and from 30% to 40%: perf report --time 0%-10%,30%-40% perf script --time 0%-10%,30%-40% Select the time slices from timestamp 3971 to 3973 perf report --time 3971,3973 perf script --time 3971,3973 Committer testing: Using the above examples, check before and after to see if it remains the same: $ perf record -F 10000 -- find . -name "*.[ch]" -exec cat {} + > /dev/null [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 1.626 MB perf.data (42392 samples) ] $ $ perf report --time 10%/1,10%/2 > /tmp/report.before.1 $ perf script --time 10%/1,10%/2 > /tmp/script.before.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.before.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.before.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.before.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.before.3 For example, the 3rd test produces this slice: $ cat /tmp/script.before.3 cat 3147 180457.375844: 2143 cycles:uppp: 7f79362590d9 cfree@GLIBC_2.2.5+0x9 (/usr/lib64/libc-2.28.so) cat 3147 180457.375986: 2245 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376012: 2164 cycles:uppp: 7f7936257430 _int_malloc+0x8c0 (/usr/lib64/libc-2.28.so) cat 3147 180457.376140: 2921 cycles:uppp: 558b70f3a554 [unknown] (/usr/bin/cat) cat 3147 180457.376296: 2844 cycles:uppp: 7f7936258abe malloc+0x4e (/usr/lib64/libc-2.28.so) cat 3147 180457.376431: 2717 cycles:uppp: 558b70f3b0ca [unknown] (/usr/bin/cat) cat 3147 180457.376667: 2630 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376795: 2442 cycles:uppp: 7f79362bff55 read+0x15 (/usr/lib64/libc-2.28.so) cat 3147 180457.376927: 2376 cycles:uppp: ffffffff9aa00163 [unknown] ([unknown]) cat 3147 180457.376954: 2307 cycles:uppp: 7f7936257438 _int_malloc+0x8c8 (/usr/lib64/libc-2.28.so) cat 3147 180457.377116: 3091 cycles:uppp: 7f7936258a70 malloc+0x0 (/usr/lib64/libc-2.28.so) cat 3147 180457.377362: 2945 cycles:uppp: 558b70f3a3b0 [unknown] (/usr/bin/cat) cat 3147 180457.377517: 2727 cycles:uppp: 558b70f3a9aa [unknown] (/usr/bin/cat) $ Install 'coreutils-debuginfo' to see cat's guts (symbols), but then, the above chunk translates into this 'perf report' output: $ cat /tmp/report.before.3 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 13 of event 'cycles:uppp' (time slices: 180457.375844,180457.377717) # Event count (approx.): 33552 # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 17.69% cat libc-2.28.so [.] malloc 14.53% cat cat [.] 0x000000000000586e 13.33% cat libc-2.28.so [.] _int_malloc 8.78% cat cat [.] 0x00000000000023b0 8.71% cat cat [.] 0x0000000000002554 8.13% cat cat [.] 0x00000000000029aa 8.10% cat cat [.] 0x00000000000030ca 7.28% cat libc-2.28.so [.] read 7.08% cat [unknown] [k] 0xffffffff9aa00163 6.39% cat libc-2.28.so [.] cfree@GLIBC_2.2.5 # # (Tip: Order by the overhead of source file name and line number: perf report -s srcline) # $ Now lets see after applying this patch, nothing should change: $ perf report --time 10%/1,10%/2 > /tmp/report.after.1 $ perf script --time 10%/1,10%/2 > /tmp/script.after.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.after.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.after.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.after.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.after.3 $ diff -u /tmp/report.before.1 /tmp/report.after.1 $ diff -u /tmp/script.before.1 /tmp/script.after.1 $ diff -u /tmp/report.before.2 /tmp/report.after.2 --- /tmp/report.before.2 2019-03-01 11:01:53.526094883 -0300 +++ /tmp/report.after.2 2019-03-01 11:09:18.231770467 -0300 @@ -352,5 +352,5 @@ # -# (Tip: Generate a script for your data: perf script -g <lang>) +# (Tip: Treat branches as callchains: perf report --branch-history) # $ diff -u /tmp/script.before.2 /tmp/script.after.2 $ diff -u /tmp/report.before.3 /tmp/report.after.3 --- /tmp/report.before.3 2019-03-01 11:03:08.890045588 -0300 +++ /tmp/report.after.3 2019-03-01 11:09:40.660224002 -0300 @@ -22,5 +22,5 @@ # -# (Tip: Order by the overhead of source file name and line number: perf report -s srcline) +# (Tip: List events using substring match: perf list <keyword>) # $ diff -u /tmp/script.before.3 /tmp/script.after.3 $ Cool, just the 'perf report' tips changed, QED. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551435186-6008-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-01 18:13:06 +08:00
#include "session.h"
#include "evlist.h"
perf tools: Move parse_nsec_time to time-utils.c Code move only; no functional change intended. Committer notes: Fix the build on Ubuntu 16.04 x86-64 cross-compiling to S/390, with this set of auto-detected features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ on ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libslang: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ on ] Where it was failing with: CC /tmp/build/perf/util/time-utils.o util/time-utils.c: In function 'parse_nsec_time': util/time-utils.c:17:13: error: implicit declaration of function 'strtoul' [-Werror=implicit-function-declaration] time_sec = strtoul(str, &end, 10); ^ util/time-utils.c:17:2: error: nested extern declaration of 'strtoul' [-Werror=nested-externs] time_sec = strtoul(str, &end, 10); ^ util/time-utils.c: In function 'perf_time__parse_str': util/time-utils.c:93:2: error: implicit declaration of function 'free' [-Werror=implicit-function-declaration] free(str); ^ util/time-utils.c:93:2: error: incompatible implicit declaration of built-in function 'free' [-Werror] util/time-utils.c:93:2: note: include '<stdlib.h>' or provide a declaration of 'free' Do as suggested and add a '#include <stdlib.h>' to get the free() and strtoul() declarations and fix the build. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-3-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:42 +08:00
int parse_nsec_time(const char *str, u64 *ptime)
{
u64 time_sec, time_nsec;
char *end;
time_sec = strtoul(str, &end, 10);
if (*end != '.' && *end != '\0')
return -1;
if (*end == '.') {
int i;
char nsec_buf[10];
if (strlen(++end) > 9)
return -1;
strncpy(nsec_buf, end, 9);
nsec_buf[9] = '\0';
/* make it nsec precision */
for (i = strlen(nsec_buf); i < 9; i++)
nsec_buf[i] = '0';
time_nsec = strtoul(nsec_buf, &end, 10);
if (*end != '\0')
return -1;
} else
time_nsec = 0;
*ptime = time_sec * NSEC_PER_SEC + time_nsec;
return 0;
}
static int parse_timestr_sec_nsec(struct perf_time_interval *ptime,
char *start_str, char *end_str)
{
if (start_str && (*start_str != '\0') &&
(parse_nsec_time(start_str, &ptime->start) != 0)) {
return -1;
}
if (end_str && (*end_str != '\0') &&
(parse_nsec_time(end_str, &ptime->end) != 0)) {
return -1;
}
return 0;
}
static int split_start_end(char **start, char **end, const char *ostr, char ch)
{
char *start_str, *end_str;
char *d, *str;
if (ostr == NULL || *ostr == '\0')
return 0;
/* copy original string because we need to modify it */
str = strdup(ostr);
if (str == NULL)
return -ENOMEM;
start_str = str;
d = strchr(start_str, ch);
if (d) {
*d = '\0';
++d;
}
end_str = d;
*start = start_str;
*end = end_str;
return 0;
}
int perf_time__parse_str(struct perf_time_interval *ptime, const char *ostr)
{
char *start_str = NULL, *end_str;
int rc;
rc = split_start_end(&start_str, &end_str, ostr, ',');
if (rc || !start_str)
return rc;
ptime->start = 0;
ptime->end = 0;
rc = parse_timestr_sec_nsec(ptime, start_str, end_str);
free(start_str);
/* make sure end time is after start time if it was given */
if (rc == 0 && ptime->end && ptime->end < ptime->start)
return -EINVAL;
pr_debug("start time %" PRIu64 ", ", ptime->start);
pr_debug("end time %" PRIu64 "\n", ptime->end);
return rc;
}
static int perf_time__parse_strs(struct perf_time_interval *ptime,
const char *ostr, int size)
{
const char *cp;
char *str, *arg, *p;
int i, num = 0, rc = 0;
/* Count the commas */
for (cp = ostr; *cp; cp++)
num += !!(*cp == ',');
if (!num)
return -EINVAL;
BUG_ON(num > size);
str = strdup(ostr);
if (!str)
return -ENOMEM;
/* Split the string and parse each piece, except the last */
for (i = 0, p = str; i < num - 1; i++) {
arg = p;
/* Find next comma, there must be one */
p = skip_spaces(strchr(p, ',') + 1);
/* Skip the value, must not contain space or comma */
while (*p && !isspace(*p)) {
if (*p++ == ',') {
rc = -EINVAL;
goto out;
}
}
/* Split and parse */
if (*p)
*p++ = 0;
rc = perf_time__parse_str(ptime + i, arg);
if (rc < 0)
goto out;
}
/* Parse the last piece */
rc = perf_time__parse_str(ptime + i, p);
if (rc < 0)
goto out;
/* Check there is no overlap */
for (i = 0; i < num - 1; i++) {
if (ptime[i].end >= ptime[i + 1].start) {
rc = -EINVAL;
goto out;
}
}
rc = num;
out:
free(str);
return rc;
}
static int parse_percent(double *pcnt, char *str)
{
char *c, *endptr;
double d;
c = strchr(str, '%');
if (c)
*c = '\0';
else
return -1;
d = strtod(str, &endptr);
if (endptr != str + strlen(str))
return -1;
*pcnt = d / 100.0;
return 0;
}
static int set_percent_time(struct perf_time_interval *ptime, double start_pcnt,
double end_pcnt, u64 start, u64 end)
{
u64 total = end - start;
if (start_pcnt < 0.0 || start_pcnt > 1.0 ||
end_pcnt < 0.0 || end_pcnt > 1.0) {
return -1;
}
ptime->start = start + round(start_pcnt * total);
ptime->end = start + round(end_pcnt * total);
if (ptime->end > ptime->start && ptime->end != end)
ptime->end -= 1;
return 0;
}
static int percent_slash_split(char *str, struct perf_time_interval *ptime,
u64 start, u64 end)
{
char *p, *end_str;
double pcnt, start_pcnt, end_pcnt;
int i;
/*
* Example:
* 10%/2: select the second 10% slice and the third 10% slice
*/
/* We can modify this string since the original one is copied */
p = strchr(str, '/');
if (!p)
return -1;
*p = '\0';
if (parse_percent(&pcnt, str) < 0)
return -1;
p++;
i = (int)strtol(p, &end_str, 10);
if (*end_str)
return -1;
if (pcnt <= 0.0)
return -1;
start_pcnt = pcnt * (i - 1);
end_pcnt = pcnt * i;
return set_percent_time(ptime, start_pcnt, end_pcnt, start, end);
}
static int percent_dash_split(char *str, struct perf_time_interval *ptime,
u64 start, u64 end)
{
char *start_str = NULL, *end_str;
double start_pcnt, end_pcnt;
int ret;
/*
* Example: 0%-10%
*/
ret = split_start_end(&start_str, &end_str, str, '-');
if (ret || !start_str)
return ret;
if ((parse_percent(&start_pcnt, start_str) != 0) ||
(parse_percent(&end_pcnt, end_str) != 0)) {
free(start_str);
return -1;
}
free(start_str);
return set_percent_time(ptime, start_pcnt, end_pcnt, start, end);
}
typedef int (*time_pecent_split)(char *, struct perf_time_interval *,
u64 start, u64 end);
static int percent_comma_split(struct perf_time_interval *ptime_buf, int num,
const char *ostr, u64 start, u64 end,
time_pecent_split func)
{
char *str, *p1, *p2;
int len, ret, i = 0;
str = strdup(ostr);
if (str == NULL)
return -ENOMEM;
len = strlen(str);
p1 = str;
while (p1 < str + len) {
if (i >= num) {
free(str);
return -1;
}
p2 = strchr(p1, ',');
if (p2)
*p2 = '\0';
ret = (func)(p1, &ptime_buf[i], start, end);
if (ret < 0) {
free(str);
return -1;
}
pr_debug("start time %d: %" PRIu64 ", ", i, ptime_buf[i].start);
pr_debug("end time %d: %" PRIu64 "\n", i, ptime_buf[i].end);
i++;
if (p2)
p1 = p2 + 1;
else
break;
}
free(str);
return i;
}
static int one_percent_convert(struct perf_time_interval *ptime_buf,
const char *ostr, u64 start, u64 end, char *c)
{
char *str;
int len = strlen(ostr), ret;
/*
* c points to '%'.
* '%' should be the last character
*/
if (ostr + len - 1 != c)
return -1;
/*
* Construct a string like "xx%/1"
*/
str = malloc(len + 3);
if (str == NULL)
return -ENOMEM;
memcpy(str, ostr, len);
strcpy(str + len, "/1");
ret = percent_slash_split(str, ptime_buf, start, end);
if (ret == 0)
ret = 1;
free(str);
return ret;
}
int perf_time__percent_parse_str(struct perf_time_interval *ptime_buf, int num,
const char *ostr, u64 start, u64 end)
{
char *c;
/*
* ostr example:
* 10%/2,10%/3: select the second 10% slice and the third 10% slice
* 0%-10%,30%-40%: multiple time range
* 50%: just one percent
*/
memset(ptime_buf, 0, sizeof(*ptime_buf) * num);
c = strchr(ostr, '/');
if (c) {
return percent_comma_split(ptime_buf, num, ostr, start,
end, percent_slash_split);
}
c = strchr(ostr, '-');
if (c) {
return percent_comma_split(ptime_buf, num, ostr, start,
end, percent_dash_split);
}
c = strchr(ostr, '%');
if (c)
return one_percent_convert(ptime_buf, ostr, start, end, c);
return -1;
}
struct perf_time_interval *perf_time__range_alloc(const char *ostr, int *size)
{
const char *p1, *p2;
int i = 1;
struct perf_time_interval *ptime;
/*
* At least allocate one time range.
*/
if (!ostr)
goto alloc;
p1 = ostr;
while (p1 < ostr + strlen(ostr)) {
p2 = strchr(p1, ',');
if (!p2)
break;
p1 = p2 + 1;
i++;
}
alloc:
*size = i;
ptime = calloc(i, sizeof(*ptime));
return ptime;
}
bool perf_time__skip_sample(struct perf_time_interval *ptime, u64 timestamp)
{
/* if time is not set don't drop sample */
if (timestamp == 0)
return false;
/* otherwise compare sample time to time window */
if ((ptime->start && timestamp < ptime->start) ||
(ptime->end && timestamp > ptime->end)) {
return true;
}
return false;
}
bool perf_time__ranges_skip_sample(struct perf_time_interval *ptime_buf,
int num, u64 timestamp)
{
struct perf_time_interval *ptime;
int i;
perf time-utils: Refactor time range parsing code Jiri points out that we don't need any time checking and time string parsing if the --time option is not set. That makes sense. This patch refactors the time range parsing code, move the duplicated code from perf report and perf script to time_utils and check if --time option is set before parsing the time string. This patch is no logic change expected. So the usage of --time is same as before. For example: Select the first and second 10% time slices: perf report --time 10%/1,10%/2 perf script --time 10%/1,10%/2 Select the slices from 0% to 10% and from 30% to 40%: perf report --time 0%-10%,30%-40% perf script --time 0%-10%,30%-40% Select the time slices from timestamp 3971 to 3973 perf report --time 3971,3973 perf script --time 3971,3973 Committer testing: Using the above examples, check before and after to see if it remains the same: $ perf record -F 10000 -- find . -name "*.[ch]" -exec cat {} + > /dev/null [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 1.626 MB perf.data (42392 samples) ] $ $ perf report --time 10%/1,10%/2 > /tmp/report.before.1 $ perf script --time 10%/1,10%/2 > /tmp/script.before.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.before.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.before.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.before.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.before.3 For example, the 3rd test produces this slice: $ cat /tmp/script.before.3 cat 3147 180457.375844: 2143 cycles:uppp: 7f79362590d9 cfree@GLIBC_2.2.5+0x9 (/usr/lib64/libc-2.28.so) cat 3147 180457.375986: 2245 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376012: 2164 cycles:uppp: 7f7936257430 _int_malloc+0x8c0 (/usr/lib64/libc-2.28.so) cat 3147 180457.376140: 2921 cycles:uppp: 558b70f3a554 [unknown] (/usr/bin/cat) cat 3147 180457.376296: 2844 cycles:uppp: 7f7936258abe malloc+0x4e (/usr/lib64/libc-2.28.so) cat 3147 180457.376431: 2717 cycles:uppp: 558b70f3b0ca [unknown] (/usr/bin/cat) cat 3147 180457.376667: 2630 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376795: 2442 cycles:uppp: 7f79362bff55 read+0x15 (/usr/lib64/libc-2.28.so) cat 3147 180457.376927: 2376 cycles:uppp: ffffffff9aa00163 [unknown] ([unknown]) cat 3147 180457.376954: 2307 cycles:uppp: 7f7936257438 _int_malloc+0x8c8 (/usr/lib64/libc-2.28.so) cat 3147 180457.377116: 3091 cycles:uppp: 7f7936258a70 malloc+0x0 (/usr/lib64/libc-2.28.so) cat 3147 180457.377362: 2945 cycles:uppp: 558b70f3a3b0 [unknown] (/usr/bin/cat) cat 3147 180457.377517: 2727 cycles:uppp: 558b70f3a9aa [unknown] (/usr/bin/cat) $ Install 'coreutils-debuginfo' to see cat's guts (symbols), but then, the above chunk translates into this 'perf report' output: $ cat /tmp/report.before.3 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 13 of event 'cycles:uppp' (time slices: 180457.375844,180457.377717) # Event count (approx.): 33552 # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 17.69% cat libc-2.28.so [.] malloc 14.53% cat cat [.] 0x000000000000586e 13.33% cat libc-2.28.so [.] _int_malloc 8.78% cat cat [.] 0x00000000000023b0 8.71% cat cat [.] 0x0000000000002554 8.13% cat cat [.] 0x00000000000029aa 8.10% cat cat [.] 0x00000000000030ca 7.28% cat libc-2.28.so [.] read 7.08% cat [unknown] [k] 0xffffffff9aa00163 6.39% cat libc-2.28.so [.] cfree@GLIBC_2.2.5 # # (Tip: Order by the overhead of source file name and line number: perf report -s srcline) # $ Now lets see after applying this patch, nothing should change: $ perf report --time 10%/1,10%/2 > /tmp/report.after.1 $ perf script --time 10%/1,10%/2 > /tmp/script.after.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.after.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.after.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.after.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.after.3 $ diff -u /tmp/report.before.1 /tmp/report.after.1 $ diff -u /tmp/script.before.1 /tmp/script.after.1 $ diff -u /tmp/report.before.2 /tmp/report.after.2 --- /tmp/report.before.2 2019-03-01 11:01:53.526094883 -0300 +++ /tmp/report.after.2 2019-03-01 11:09:18.231770467 -0300 @@ -352,5 +352,5 @@ # -# (Tip: Generate a script for your data: perf script -g <lang>) +# (Tip: Treat branches as callchains: perf report --branch-history) # $ diff -u /tmp/script.before.2 /tmp/script.after.2 $ diff -u /tmp/report.before.3 /tmp/report.after.3 --- /tmp/report.before.3 2019-03-01 11:03:08.890045588 -0300 +++ /tmp/report.after.3 2019-03-01 11:09:40.660224002 -0300 @@ -22,5 +22,5 @@ # -# (Tip: Order by the overhead of source file name and line number: perf report -s srcline) +# (Tip: List events using substring match: perf list <keyword>) # $ diff -u /tmp/script.before.3 /tmp/script.after.3 $ Cool, just the 'perf report' tips changed, QED. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551435186-6008-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-01 18:13:06 +08:00
if ((!ptime_buf) || (timestamp == 0) || (num == 0))
return false;
if (num == 1)
return perf_time__skip_sample(&ptime_buf[0], timestamp);
/*
* start/end of multiple time ranges must be valid.
*/
for (i = 0; i < num; i++) {
ptime = &ptime_buf[i];
if (timestamp >= ptime->start &&
(timestamp <= ptime->end || !ptime->end)) {
return false;
}
}
return true;
}
perf time-utils: Refactor time range parsing code Jiri points out that we don't need any time checking and time string parsing if the --time option is not set. That makes sense. This patch refactors the time range parsing code, move the duplicated code from perf report and perf script to time_utils and check if --time option is set before parsing the time string. This patch is no logic change expected. So the usage of --time is same as before. For example: Select the first and second 10% time slices: perf report --time 10%/1,10%/2 perf script --time 10%/1,10%/2 Select the slices from 0% to 10% and from 30% to 40%: perf report --time 0%-10%,30%-40% perf script --time 0%-10%,30%-40% Select the time slices from timestamp 3971 to 3973 perf report --time 3971,3973 perf script --time 3971,3973 Committer testing: Using the above examples, check before and after to see if it remains the same: $ perf record -F 10000 -- find . -name "*.[ch]" -exec cat {} + > /dev/null [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 1.626 MB perf.data (42392 samples) ] $ $ perf report --time 10%/1,10%/2 > /tmp/report.before.1 $ perf script --time 10%/1,10%/2 > /tmp/script.before.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.before.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.before.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.before.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.before.3 For example, the 3rd test produces this slice: $ cat /tmp/script.before.3 cat 3147 180457.375844: 2143 cycles:uppp: 7f79362590d9 cfree@GLIBC_2.2.5+0x9 (/usr/lib64/libc-2.28.so) cat 3147 180457.375986: 2245 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376012: 2164 cycles:uppp: 7f7936257430 _int_malloc+0x8c0 (/usr/lib64/libc-2.28.so) cat 3147 180457.376140: 2921 cycles:uppp: 558b70f3a554 [unknown] (/usr/bin/cat) cat 3147 180457.376296: 2844 cycles:uppp: 7f7936258abe malloc+0x4e (/usr/lib64/libc-2.28.so) cat 3147 180457.376431: 2717 cycles:uppp: 558b70f3b0ca [unknown] (/usr/bin/cat) cat 3147 180457.376667: 2630 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376795: 2442 cycles:uppp: 7f79362bff55 read+0x15 (/usr/lib64/libc-2.28.so) cat 3147 180457.376927: 2376 cycles:uppp: ffffffff9aa00163 [unknown] ([unknown]) cat 3147 180457.376954: 2307 cycles:uppp: 7f7936257438 _int_malloc+0x8c8 (/usr/lib64/libc-2.28.so) cat 3147 180457.377116: 3091 cycles:uppp: 7f7936258a70 malloc+0x0 (/usr/lib64/libc-2.28.so) cat 3147 180457.377362: 2945 cycles:uppp: 558b70f3a3b0 [unknown] (/usr/bin/cat) cat 3147 180457.377517: 2727 cycles:uppp: 558b70f3a9aa [unknown] (/usr/bin/cat) $ Install 'coreutils-debuginfo' to see cat's guts (symbols), but then, the above chunk translates into this 'perf report' output: $ cat /tmp/report.before.3 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 13 of event 'cycles:uppp' (time slices: 180457.375844,180457.377717) # Event count (approx.): 33552 # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 17.69% cat libc-2.28.so [.] malloc 14.53% cat cat [.] 0x000000000000586e 13.33% cat libc-2.28.so [.] _int_malloc 8.78% cat cat [.] 0x00000000000023b0 8.71% cat cat [.] 0x0000000000002554 8.13% cat cat [.] 0x00000000000029aa 8.10% cat cat [.] 0x00000000000030ca 7.28% cat libc-2.28.so [.] read 7.08% cat [unknown] [k] 0xffffffff9aa00163 6.39% cat libc-2.28.so [.] cfree@GLIBC_2.2.5 # # (Tip: Order by the overhead of source file name and line number: perf report -s srcline) # $ Now lets see after applying this patch, nothing should change: $ perf report --time 10%/1,10%/2 > /tmp/report.after.1 $ perf script --time 10%/1,10%/2 > /tmp/script.after.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.after.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.after.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.after.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.after.3 $ diff -u /tmp/report.before.1 /tmp/report.after.1 $ diff -u /tmp/script.before.1 /tmp/script.after.1 $ diff -u /tmp/report.before.2 /tmp/report.after.2 --- /tmp/report.before.2 2019-03-01 11:01:53.526094883 -0300 +++ /tmp/report.after.2 2019-03-01 11:09:18.231770467 -0300 @@ -352,5 +352,5 @@ # -# (Tip: Generate a script for your data: perf script -g <lang>) +# (Tip: Treat branches as callchains: perf report --branch-history) # $ diff -u /tmp/script.before.2 /tmp/script.after.2 $ diff -u /tmp/report.before.3 /tmp/report.after.3 --- /tmp/report.before.3 2019-03-01 11:03:08.890045588 -0300 +++ /tmp/report.after.3 2019-03-01 11:09:40.660224002 -0300 @@ -22,5 +22,5 @@ # -# (Tip: Order by the overhead of source file name and line number: perf report -s srcline) +# (Tip: List events using substring match: perf list <keyword>) # $ diff -u /tmp/script.before.3 /tmp/script.after.3 $ Cool, just the 'perf report' tips changed, QED. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551435186-6008-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-01 18:13:06 +08:00
int perf_time__parse_for_ranges(const char *time_str,
struct perf_session *session,
struct perf_time_interval **ranges,
int *range_size, int *range_num)
{
bool has_percent = strchr(time_str, '%');
perf time-utils: Refactor time range parsing code Jiri points out that we don't need any time checking and time string parsing if the --time option is not set. That makes sense. This patch refactors the time range parsing code, move the duplicated code from perf report and perf script to time_utils and check if --time option is set before parsing the time string. This patch is no logic change expected. So the usage of --time is same as before. For example: Select the first and second 10% time slices: perf report --time 10%/1,10%/2 perf script --time 10%/1,10%/2 Select the slices from 0% to 10% and from 30% to 40%: perf report --time 0%-10%,30%-40% perf script --time 0%-10%,30%-40% Select the time slices from timestamp 3971 to 3973 perf report --time 3971,3973 perf script --time 3971,3973 Committer testing: Using the above examples, check before and after to see if it remains the same: $ perf record -F 10000 -- find . -name "*.[ch]" -exec cat {} + > /dev/null [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 1.626 MB perf.data (42392 samples) ] $ $ perf report --time 10%/1,10%/2 > /tmp/report.before.1 $ perf script --time 10%/1,10%/2 > /tmp/script.before.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.before.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.before.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.before.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.before.3 For example, the 3rd test produces this slice: $ cat /tmp/script.before.3 cat 3147 180457.375844: 2143 cycles:uppp: 7f79362590d9 cfree@GLIBC_2.2.5+0x9 (/usr/lib64/libc-2.28.so) cat 3147 180457.375986: 2245 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376012: 2164 cycles:uppp: 7f7936257430 _int_malloc+0x8c0 (/usr/lib64/libc-2.28.so) cat 3147 180457.376140: 2921 cycles:uppp: 558b70f3a554 [unknown] (/usr/bin/cat) cat 3147 180457.376296: 2844 cycles:uppp: 7f7936258abe malloc+0x4e (/usr/lib64/libc-2.28.so) cat 3147 180457.376431: 2717 cycles:uppp: 558b70f3b0ca [unknown] (/usr/bin/cat) cat 3147 180457.376667: 2630 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376795: 2442 cycles:uppp: 7f79362bff55 read+0x15 (/usr/lib64/libc-2.28.so) cat 3147 180457.376927: 2376 cycles:uppp: ffffffff9aa00163 [unknown] ([unknown]) cat 3147 180457.376954: 2307 cycles:uppp: 7f7936257438 _int_malloc+0x8c8 (/usr/lib64/libc-2.28.so) cat 3147 180457.377116: 3091 cycles:uppp: 7f7936258a70 malloc+0x0 (/usr/lib64/libc-2.28.so) cat 3147 180457.377362: 2945 cycles:uppp: 558b70f3a3b0 [unknown] (/usr/bin/cat) cat 3147 180457.377517: 2727 cycles:uppp: 558b70f3a9aa [unknown] (/usr/bin/cat) $ Install 'coreutils-debuginfo' to see cat's guts (symbols), but then, the above chunk translates into this 'perf report' output: $ cat /tmp/report.before.3 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 13 of event 'cycles:uppp' (time slices: 180457.375844,180457.377717) # Event count (approx.): 33552 # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 17.69% cat libc-2.28.so [.] malloc 14.53% cat cat [.] 0x000000000000586e 13.33% cat libc-2.28.so [.] _int_malloc 8.78% cat cat [.] 0x00000000000023b0 8.71% cat cat [.] 0x0000000000002554 8.13% cat cat [.] 0x00000000000029aa 8.10% cat cat [.] 0x00000000000030ca 7.28% cat libc-2.28.so [.] read 7.08% cat [unknown] [k] 0xffffffff9aa00163 6.39% cat libc-2.28.so [.] cfree@GLIBC_2.2.5 # # (Tip: Order by the overhead of source file name and line number: perf report -s srcline) # $ Now lets see after applying this patch, nothing should change: $ perf report --time 10%/1,10%/2 > /tmp/report.after.1 $ perf script --time 10%/1,10%/2 > /tmp/script.after.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.after.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.after.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.after.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.after.3 $ diff -u /tmp/report.before.1 /tmp/report.after.1 $ diff -u /tmp/script.before.1 /tmp/script.after.1 $ diff -u /tmp/report.before.2 /tmp/report.after.2 --- /tmp/report.before.2 2019-03-01 11:01:53.526094883 -0300 +++ /tmp/report.after.2 2019-03-01 11:09:18.231770467 -0300 @@ -352,5 +352,5 @@ # -# (Tip: Generate a script for your data: perf script -g <lang>) +# (Tip: Treat branches as callchains: perf report --branch-history) # $ diff -u /tmp/script.before.2 /tmp/script.after.2 $ diff -u /tmp/report.before.3 /tmp/report.after.3 --- /tmp/report.before.3 2019-03-01 11:03:08.890045588 -0300 +++ /tmp/report.after.3 2019-03-01 11:09:40.660224002 -0300 @@ -22,5 +22,5 @@ # -# (Tip: Order by the overhead of source file name and line number: perf report -s srcline) +# (Tip: List events using substring match: perf list <keyword>) # $ diff -u /tmp/script.before.3 /tmp/script.after.3 $ Cool, just the 'perf report' tips changed, QED. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551435186-6008-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-01 18:13:06 +08:00
struct perf_time_interval *ptime_range;
int size, num, ret = -EINVAL;
perf time-utils: Refactor time range parsing code Jiri points out that we don't need any time checking and time string parsing if the --time option is not set. That makes sense. This patch refactors the time range parsing code, move the duplicated code from perf report and perf script to time_utils and check if --time option is set before parsing the time string. This patch is no logic change expected. So the usage of --time is same as before. For example: Select the first and second 10% time slices: perf report --time 10%/1,10%/2 perf script --time 10%/1,10%/2 Select the slices from 0% to 10% and from 30% to 40%: perf report --time 0%-10%,30%-40% perf script --time 0%-10%,30%-40% Select the time slices from timestamp 3971 to 3973 perf report --time 3971,3973 perf script --time 3971,3973 Committer testing: Using the above examples, check before and after to see if it remains the same: $ perf record -F 10000 -- find . -name "*.[ch]" -exec cat {} + > /dev/null [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 1.626 MB perf.data (42392 samples) ] $ $ perf report --time 10%/1,10%/2 > /tmp/report.before.1 $ perf script --time 10%/1,10%/2 > /tmp/script.before.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.before.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.before.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.before.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.before.3 For example, the 3rd test produces this slice: $ cat /tmp/script.before.3 cat 3147 180457.375844: 2143 cycles:uppp: 7f79362590d9 cfree@GLIBC_2.2.5+0x9 (/usr/lib64/libc-2.28.so) cat 3147 180457.375986: 2245 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376012: 2164 cycles:uppp: 7f7936257430 _int_malloc+0x8c0 (/usr/lib64/libc-2.28.so) cat 3147 180457.376140: 2921 cycles:uppp: 558b70f3a554 [unknown] (/usr/bin/cat) cat 3147 180457.376296: 2844 cycles:uppp: 7f7936258abe malloc+0x4e (/usr/lib64/libc-2.28.so) cat 3147 180457.376431: 2717 cycles:uppp: 558b70f3b0ca [unknown] (/usr/bin/cat) cat 3147 180457.376667: 2630 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376795: 2442 cycles:uppp: 7f79362bff55 read+0x15 (/usr/lib64/libc-2.28.so) cat 3147 180457.376927: 2376 cycles:uppp: ffffffff9aa00163 [unknown] ([unknown]) cat 3147 180457.376954: 2307 cycles:uppp: 7f7936257438 _int_malloc+0x8c8 (/usr/lib64/libc-2.28.so) cat 3147 180457.377116: 3091 cycles:uppp: 7f7936258a70 malloc+0x0 (/usr/lib64/libc-2.28.so) cat 3147 180457.377362: 2945 cycles:uppp: 558b70f3a3b0 [unknown] (/usr/bin/cat) cat 3147 180457.377517: 2727 cycles:uppp: 558b70f3a9aa [unknown] (/usr/bin/cat) $ Install 'coreutils-debuginfo' to see cat's guts (symbols), but then, the above chunk translates into this 'perf report' output: $ cat /tmp/report.before.3 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 13 of event 'cycles:uppp' (time slices: 180457.375844,180457.377717) # Event count (approx.): 33552 # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 17.69% cat libc-2.28.so [.] malloc 14.53% cat cat [.] 0x000000000000586e 13.33% cat libc-2.28.so [.] _int_malloc 8.78% cat cat [.] 0x00000000000023b0 8.71% cat cat [.] 0x0000000000002554 8.13% cat cat [.] 0x00000000000029aa 8.10% cat cat [.] 0x00000000000030ca 7.28% cat libc-2.28.so [.] read 7.08% cat [unknown] [k] 0xffffffff9aa00163 6.39% cat libc-2.28.so [.] cfree@GLIBC_2.2.5 # # (Tip: Order by the overhead of source file name and line number: perf report -s srcline) # $ Now lets see after applying this patch, nothing should change: $ perf report --time 10%/1,10%/2 > /tmp/report.after.1 $ perf script --time 10%/1,10%/2 > /tmp/script.after.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.after.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.after.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.after.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.after.3 $ diff -u /tmp/report.before.1 /tmp/report.after.1 $ diff -u /tmp/script.before.1 /tmp/script.after.1 $ diff -u /tmp/report.before.2 /tmp/report.after.2 --- /tmp/report.before.2 2019-03-01 11:01:53.526094883 -0300 +++ /tmp/report.after.2 2019-03-01 11:09:18.231770467 -0300 @@ -352,5 +352,5 @@ # -# (Tip: Generate a script for your data: perf script -g <lang>) +# (Tip: Treat branches as callchains: perf report --branch-history) # $ diff -u /tmp/script.before.2 /tmp/script.after.2 $ diff -u /tmp/report.before.3 /tmp/report.after.3 --- /tmp/report.before.3 2019-03-01 11:03:08.890045588 -0300 +++ /tmp/report.after.3 2019-03-01 11:09:40.660224002 -0300 @@ -22,5 +22,5 @@ # -# (Tip: Order by the overhead of source file name and line number: perf report -s srcline) +# (Tip: List events using substring match: perf list <keyword>) # $ diff -u /tmp/script.before.3 /tmp/script.after.3 $ Cool, just the 'perf report' tips changed, QED. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551435186-6008-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-01 18:13:06 +08:00
ptime_range = perf_time__range_alloc(time_str, &size);
if (!ptime_range)
return -ENOMEM;
if (has_percent) {
perf time-utils: Refactor time range parsing code Jiri points out that we don't need any time checking and time string parsing if the --time option is not set. That makes sense. This patch refactors the time range parsing code, move the duplicated code from perf report and perf script to time_utils and check if --time option is set before parsing the time string. This patch is no logic change expected. So the usage of --time is same as before. For example: Select the first and second 10% time slices: perf report --time 10%/1,10%/2 perf script --time 10%/1,10%/2 Select the slices from 0% to 10% and from 30% to 40%: perf report --time 0%-10%,30%-40% perf script --time 0%-10%,30%-40% Select the time slices from timestamp 3971 to 3973 perf report --time 3971,3973 perf script --time 3971,3973 Committer testing: Using the above examples, check before and after to see if it remains the same: $ perf record -F 10000 -- find . -name "*.[ch]" -exec cat {} + > /dev/null [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 1.626 MB perf.data (42392 samples) ] $ $ perf report --time 10%/1,10%/2 > /tmp/report.before.1 $ perf script --time 10%/1,10%/2 > /tmp/script.before.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.before.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.before.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.before.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.before.3 For example, the 3rd test produces this slice: $ cat /tmp/script.before.3 cat 3147 180457.375844: 2143 cycles:uppp: 7f79362590d9 cfree@GLIBC_2.2.5+0x9 (/usr/lib64/libc-2.28.so) cat 3147 180457.375986: 2245 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376012: 2164 cycles:uppp: 7f7936257430 _int_malloc+0x8c0 (/usr/lib64/libc-2.28.so) cat 3147 180457.376140: 2921 cycles:uppp: 558b70f3a554 [unknown] (/usr/bin/cat) cat 3147 180457.376296: 2844 cycles:uppp: 7f7936258abe malloc+0x4e (/usr/lib64/libc-2.28.so) cat 3147 180457.376431: 2717 cycles:uppp: 558b70f3b0ca [unknown] (/usr/bin/cat) cat 3147 180457.376667: 2630 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376795: 2442 cycles:uppp: 7f79362bff55 read+0x15 (/usr/lib64/libc-2.28.so) cat 3147 180457.376927: 2376 cycles:uppp: ffffffff9aa00163 [unknown] ([unknown]) cat 3147 180457.376954: 2307 cycles:uppp: 7f7936257438 _int_malloc+0x8c8 (/usr/lib64/libc-2.28.so) cat 3147 180457.377116: 3091 cycles:uppp: 7f7936258a70 malloc+0x0 (/usr/lib64/libc-2.28.so) cat 3147 180457.377362: 2945 cycles:uppp: 558b70f3a3b0 [unknown] (/usr/bin/cat) cat 3147 180457.377517: 2727 cycles:uppp: 558b70f3a9aa [unknown] (/usr/bin/cat) $ Install 'coreutils-debuginfo' to see cat's guts (symbols), but then, the above chunk translates into this 'perf report' output: $ cat /tmp/report.before.3 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 13 of event 'cycles:uppp' (time slices: 180457.375844,180457.377717) # Event count (approx.): 33552 # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 17.69% cat libc-2.28.so [.] malloc 14.53% cat cat [.] 0x000000000000586e 13.33% cat libc-2.28.so [.] _int_malloc 8.78% cat cat [.] 0x00000000000023b0 8.71% cat cat [.] 0x0000000000002554 8.13% cat cat [.] 0x00000000000029aa 8.10% cat cat [.] 0x00000000000030ca 7.28% cat libc-2.28.so [.] read 7.08% cat [unknown] [k] 0xffffffff9aa00163 6.39% cat libc-2.28.so [.] cfree@GLIBC_2.2.5 # # (Tip: Order by the overhead of source file name and line number: perf report -s srcline) # $ Now lets see after applying this patch, nothing should change: $ perf report --time 10%/1,10%/2 > /tmp/report.after.1 $ perf script --time 10%/1,10%/2 > /tmp/script.after.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.after.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.after.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.after.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.after.3 $ diff -u /tmp/report.before.1 /tmp/report.after.1 $ diff -u /tmp/script.before.1 /tmp/script.after.1 $ diff -u /tmp/report.before.2 /tmp/report.after.2 --- /tmp/report.before.2 2019-03-01 11:01:53.526094883 -0300 +++ /tmp/report.after.2 2019-03-01 11:09:18.231770467 -0300 @@ -352,5 +352,5 @@ # -# (Tip: Generate a script for your data: perf script -g <lang>) +# (Tip: Treat branches as callchains: perf report --branch-history) # $ diff -u /tmp/script.before.2 /tmp/script.after.2 $ diff -u /tmp/report.before.3 /tmp/report.after.3 --- /tmp/report.before.3 2019-03-01 11:03:08.890045588 -0300 +++ /tmp/report.after.3 2019-03-01 11:09:40.660224002 -0300 @@ -22,5 +22,5 @@ # -# (Tip: Order by the overhead of source file name and line number: perf report -s srcline) +# (Tip: List events using substring match: perf list <keyword>) # $ diff -u /tmp/script.before.3 /tmp/script.after.3 $ Cool, just the 'perf report' tips changed, QED. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551435186-6008-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-01 18:13:06 +08:00
if (session->evlist->first_sample_time == 0 &&
session->evlist->last_sample_time == 0) {
pr_err("HINT: no first/last sample time found in perf data.\n"
"Please use latest perf binary to execute 'perf record'\n"
"(if '--buildid-all' is enabled, please set '--timestamp-boundary').\n");
goto error;
}
num = perf_time__percent_parse_str(
ptime_range, size,
time_str,
session->evlist->first_sample_time,
session->evlist->last_sample_time);
} else {
num = perf_time__parse_strs(ptime_range, time_str, size);
perf time-utils: Refactor time range parsing code Jiri points out that we don't need any time checking and time string parsing if the --time option is not set. That makes sense. This patch refactors the time range parsing code, move the duplicated code from perf report and perf script to time_utils and check if --time option is set before parsing the time string. This patch is no logic change expected. So the usage of --time is same as before. For example: Select the first and second 10% time slices: perf report --time 10%/1,10%/2 perf script --time 10%/1,10%/2 Select the slices from 0% to 10% and from 30% to 40%: perf report --time 0%-10%,30%-40% perf script --time 0%-10%,30%-40% Select the time slices from timestamp 3971 to 3973 perf report --time 3971,3973 perf script --time 3971,3973 Committer testing: Using the above examples, check before and after to see if it remains the same: $ perf record -F 10000 -- find . -name "*.[ch]" -exec cat {} + > /dev/null [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 1.626 MB perf.data (42392 samples) ] $ $ perf report --time 10%/1,10%/2 > /tmp/report.before.1 $ perf script --time 10%/1,10%/2 > /tmp/script.before.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.before.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.before.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.before.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.before.3 For example, the 3rd test produces this slice: $ cat /tmp/script.before.3 cat 3147 180457.375844: 2143 cycles:uppp: 7f79362590d9 cfree@GLIBC_2.2.5+0x9 (/usr/lib64/libc-2.28.so) cat 3147 180457.375986: 2245 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376012: 2164 cycles:uppp: 7f7936257430 _int_malloc+0x8c0 (/usr/lib64/libc-2.28.so) cat 3147 180457.376140: 2921 cycles:uppp: 558b70f3a554 [unknown] (/usr/bin/cat) cat 3147 180457.376296: 2844 cycles:uppp: 7f7936258abe malloc+0x4e (/usr/lib64/libc-2.28.so) cat 3147 180457.376431: 2717 cycles:uppp: 558b70f3b0ca [unknown] (/usr/bin/cat) cat 3147 180457.376667: 2630 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376795: 2442 cycles:uppp: 7f79362bff55 read+0x15 (/usr/lib64/libc-2.28.so) cat 3147 180457.376927: 2376 cycles:uppp: ffffffff9aa00163 [unknown] ([unknown]) cat 3147 180457.376954: 2307 cycles:uppp: 7f7936257438 _int_malloc+0x8c8 (/usr/lib64/libc-2.28.so) cat 3147 180457.377116: 3091 cycles:uppp: 7f7936258a70 malloc+0x0 (/usr/lib64/libc-2.28.so) cat 3147 180457.377362: 2945 cycles:uppp: 558b70f3a3b0 [unknown] (/usr/bin/cat) cat 3147 180457.377517: 2727 cycles:uppp: 558b70f3a9aa [unknown] (/usr/bin/cat) $ Install 'coreutils-debuginfo' to see cat's guts (symbols), but then, the above chunk translates into this 'perf report' output: $ cat /tmp/report.before.3 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 13 of event 'cycles:uppp' (time slices: 180457.375844,180457.377717) # Event count (approx.): 33552 # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 17.69% cat libc-2.28.so [.] malloc 14.53% cat cat [.] 0x000000000000586e 13.33% cat libc-2.28.so [.] _int_malloc 8.78% cat cat [.] 0x00000000000023b0 8.71% cat cat [.] 0x0000000000002554 8.13% cat cat [.] 0x00000000000029aa 8.10% cat cat [.] 0x00000000000030ca 7.28% cat libc-2.28.so [.] read 7.08% cat [unknown] [k] 0xffffffff9aa00163 6.39% cat libc-2.28.so [.] cfree@GLIBC_2.2.5 # # (Tip: Order by the overhead of source file name and line number: perf report -s srcline) # $ Now lets see after applying this patch, nothing should change: $ perf report --time 10%/1,10%/2 > /tmp/report.after.1 $ perf script --time 10%/1,10%/2 > /tmp/script.after.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.after.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.after.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.after.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.after.3 $ diff -u /tmp/report.before.1 /tmp/report.after.1 $ diff -u /tmp/script.before.1 /tmp/script.after.1 $ diff -u /tmp/report.before.2 /tmp/report.after.2 --- /tmp/report.before.2 2019-03-01 11:01:53.526094883 -0300 +++ /tmp/report.after.2 2019-03-01 11:09:18.231770467 -0300 @@ -352,5 +352,5 @@ # -# (Tip: Generate a script for your data: perf script -g <lang>) +# (Tip: Treat branches as callchains: perf report --branch-history) # $ diff -u /tmp/script.before.2 /tmp/script.after.2 $ diff -u /tmp/report.before.3 /tmp/report.after.3 --- /tmp/report.before.3 2019-03-01 11:03:08.890045588 -0300 +++ /tmp/report.after.3 2019-03-01 11:09:40.660224002 -0300 @@ -22,5 +22,5 @@ # -# (Tip: Order by the overhead of source file name and line number: perf report -s srcline) +# (Tip: List events using substring match: perf list <keyword>) # $ diff -u /tmp/script.before.3 /tmp/script.after.3 $ Cool, just the 'perf report' tips changed, QED. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551435186-6008-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-01 18:13:06 +08:00
}
if (num < 0)
goto error_invalid;
perf time-utils: Refactor time range parsing code Jiri points out that we don't need any time checking and time string parsing if the --time option is not set. That makes sense. This patch refactors the time range parsing code, move the duplicated code from perf report and perf script to time_utils and check if --time option is set before parsing the time string. This patch is no logic change expected. So the usage of --time is same as before. For example: Select the first and second 10% time slices: perf report --time 10%/1,10%/2 perf script --time 10%/1,10%/2 Select the slices from 0% to 10% and from 30% to 40%: perf report --time 0%-10%,30%-40% perf script --time 0%-10%,30%-40% Select the time slices from timestamp 3971 to 3973 perf report --time 3971,3973 perf script --time 3971,3973 Committer testing: Using the above examples, check before and after to see if it remains the same: $ perf record -F 10000 -- find . -name "*.[ch]" -exec cat {} + > /dev/null [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 1.626 MB perf.data (42392 samples) ] $ $ perf report --time 10%/1,10%/2 > /tmp/report.before.1 $ perf script --time 10%/1,10%/2 > /tmp/script.before.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.before.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.before.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.before.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.before.3 For example, the 3rd test produces this slice: $ cat /tmp/script.before.3 cat 3147 180457.375844: 2143 cycles:uppp: 7f79362590d9 cfree@GLIBC_2.2.5+0x9 (/usr/lib64/libc-2.28.so) cat 3147 180457.375986: 2245 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376012: 2164 cycles:uppp: 7f7936257430 _int_malloc+0x8c0 (/usr/lib64/libc-2.28.so) cat 3147 180457.376140: 2921 cycles:uppp: 558b70f3a554 [unknown] (/usr/bin/cat) cat 3147 180457.376296: 2844 cycles:uppp: 7f7936258abe malloc+0x4e (/usr/lib64/libc-2.28.so) cat 3147 180457.376431: 2717 cycles:uppp: 558b70f3b0ca [unknown] (/usr/bin/cat) cat 3147 180457.376667: 2630 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376795: 2442 cycles:uppp: 7f79362bff55 read+0x15 (/usr/lib64/libc-2.28.so) cat 3147 180457.376927: 2376 cycles:uppp: ffffffff9aa00163 [unknown] ([unknown]) cat 3147 180457.376954: 2307 cycles:uppp: 7f7936257438 _int_malloc+0x8c8 (/usr/lib64/libc-2.28.so) cat 3147 180457.377116: 3091 cycles:uppp: 7f7936258a70 malloc+0x0 (/usr/lib64/libc-2.28.so) cat 3147 180457.377362: 2945 cycles:uppp: 558b70f3a3b0 [unknown] (/usr/bin/cat) cat 3147 180457.377517: 2727 cycles:uppp: 558b70f3a9aa [unknown] (/usr/bin/cat) $ Install 'coreutils-debuginfo' to see cat's guts (symbols), but then, the above chunk translates into this 'perf report' output: $ cat /tmp/report.before.3 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 13 of event 'cycles:uppp' (time slices: 180457.375844,180457.377717) # Event count (approx.): 33552 # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 17.69% cat libc-2.28.so [.] malloc 14.53% cat cat [.] 0x000000000000586e 13.33% cat libc-2.28.so [.] _int_malloc 8.78% cat cat [.] 0x00000000000023b0 8.71% cat cat [.] 0x0000000000002554 8.13% cat cat [.] 0x00000000000029aa 8.10% cat cat [.] 0x00000000000030ca 7.28% cat libc-2.28.so [.] read 7.08% cat [unknown] [k] 0xffffffff9aa00163 6.39% cat libc-2.28.so [.] cfree@GLIBC_2.2.5 # # (Tip: Order by the overhead of source file name and line number: perf report -s srcline) # $ Now lets see after applying this patch, nothing should change: $ perf report --time 10%/1,10%/2 > /tmp/report.after.1 $ perf script --time 10%/1,10%/2 > /tmp/script.after.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.after.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.after.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.after.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.after.3 $ diff -u /tmp/report.before.1 /tmp/report.after.1 $ diff -u /tmp/script.before.1 /tmp/script.after.1 $ diff -u /tmp/report.before.2 /tmp/report.after.2 --- /tmp/report.before.2 2019-03-01 11:01:53.526094883 -0300 +++ /tmp/report.after.2 2019-03-01 11:09:18.231770467 -0300 @@ -352,5 +352,5 @@ # -# (Tip: Generate a script for your data: perf script -g <lang>) +# (Tip: Treat branches as callchains: perf report --branch-history) # $ diff -u /tmp/script.before.2 /tmp/script.after.2 $ diff -u /tmp/report.before.3 /tmp/report.after.3 --- /tmp/report.before.3 2019-03-01 11:03:08.890045588 -0300 +++ /tmp/report.after.3 2019-03-01 11:09:40.660224002 -0300 @@ -22,5 +22,5 @@ # -# (Tip: Order by the overhead of source file name and line number: perf report -s srcline) +# (Tip: List events using substring match: perf list <keyword>) # $ diff -u /tmp/script.before.3 /tmp/script.after.3 $ Cool, just the 'perf report' tips changed, QED. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551435186-6008-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-01 18:13:06 +08:00
*range_size = size;
*range_num = num;
*ranges = ptime_range;
return 0;
error_invalid:
pr_err("Invalid time string\n");
perf time-utils: Refactor time range parsing code Jiri points out that we don't need any time checking and time string parsing if the --time option is not set. That makes sense. This patch refactors the time range parsing code, move the duplicated code from perf report and perf script to time_utils and check if --time option is set before parsing the time string. This patch is no logic change expected. So the usage of --time is same as before. For example: Select the first and second 10% time slices: perf report --time 10%/1,10%/2 perf script --time 10%/1,10%/2 Select the slices from 0% to 10% and from 30% to 40%: perf report --time 0%-10%,30%-40% perf script --time 0%-10%,30%-40% Select the time slices from timestamp 3971 to 3973 perf report --time 3971,3973 perf script --time 3971,3973 Committer testing: Using the above examples, check before and after to see if it remains the same: $ perf record -F 10000 -- find . -name "*.[ch]" -exec cat {} + > /dev/null [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 1.626 MB perf.data (42392 samples) ] $ $ perf report --time 10%/1,10%/2 > /tmp/report.before.1 $ perf script --time 10%/1,10%/2 > /tmp/script.before.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.before.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.before.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.before.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.before.3 For example, the 3rd test produces this slice: $ cat /tmp/script.before.3 cat 3147 180457.375844: 2143 cycles:uppp: 7f79362590d9 cfree@GLIBC_2.2.5+0x9 (/usr/lib64/libc-2.28.so) cat 3147 180457.375986: 2245 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376012: 2164 cycles:uppp: 7f7936257430 _int_malloc+0x8c0 (/usr/lib64/libc-2.28.so) cat 3147 180457.376140: 2921 cycles:uppp: 558b70f3a554 [unknown] (/usr/bin/cat) cat 3147 180457.376296: 2844 cycles:uppp: 7f7936258abe malloc+0x4e (/usr/lib64/libc-2.28.so) cat 3147 180457.376431: 2717 cycles:uppp: 558b70f3b0ca [unknown] (/usr/bin/cat) cat 3147 180457.376667: 2630 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat) cat 3147 180457.376795: 2442 cycles:uppp: 7f79362bff55 read+0x15 (/usr/lib64/libc-2.28.so) cat 3147 180457.376927: 2376 cycles:uppp: ffffffff9aa00163 [unknown] ([unknown]) cat 3147 180457.376954: 2307 cycles:uppp: 7f7936257438 _int_malloc+0x8c8 (/usr/lib64/libc-2.28.so) cat 3147 180457.377116: 3091 cycles:uppp: 7f7936258a70 malloc+0x0 (/usr/lib64/libc-2.28.so) cat 3147 180457.377362: 2945 cycles:uppp: 558b70f3a3b0 [unknown] (/usr/bin/cat) cat 3147 180457.377517: 2727 cycles:uppp: 558b70f3a9aa [unknown] (/usr/bin/cat) $ Install 'coreutils-debuginfo' to see cat's guts (symbols), but then, the above chunk translates into this 'perf report' output: $ cat /tmp/report.before.3 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 13 of event 'cycles:uppp' (time slices: 180457.375844,180457.377717) # Event count (approx.): 33552 # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 17.69% cat libc-2.28.so [.] malloc 14.53% cat cat [.] 0x000000000000586e 13.33% cat libc-2.28.so [.] _int_malloc 8.78% cat cat [.] 0x00000000000023b0 8.71% cat cat [.] 0x0000000000002554 8.13% cat cat [.] 0x00000000000029aa 8.10% cat cat [.] 0x00000000000030ca 7.28% cat libc-2.28.so [.] read 7.08% cat [unknown] [k] 0xffffffff9aa00163 6.39% cat libc-2.28.so [.] cfree@GLIBC_2.2.5 # # (Tip: Order by the overhead of source file name and line number: perf report -s srcline) # $ Now lets see after applying this patch, nothing should change: $ perf report --time 10%/1,10%/2 > /tmp/report.after.1 $ perf script --time 10%/1,10%/2 > /tmp/script.after.1 $ perf report --time 0%-10%,30%-40% > /tmp/report.after.2 $ perf script --time 0%-10%,30%-40% > /tmp/script.after.2 $ perf report --time 180457.375844,180457.377717 > /tmp/report.after.3 $ perf script --time 180457.375844,180457.377717 > /tmp/script.after.3 $ diff -u /tmp/report.before.1 /tmp/report.after.1 $ diff -u /tmp/script.before.1 /tmp/script.after.1 $ diff -u /tmp/report.before.2 /tmp/report.after.2 --- /tmp/report.before.2 2019-03-01 11:01:53.526094883 -0300 +++ /tmp/report.after.2 2019-03-01 11:09:18.231770467 -0300 @@ -352,5 +352,5 @@ # -# (Tip: Generate a script for your data: perf script -g <lang>) +# (Tip: Treat branches as callchains: perf report --branch-history) # $ diff -u /tmp/script.before.2 /tmp/script.after.2 $ diff -u /tmp/report.before.3 /tmp/report.after.3 --- /tmp/report.before.3 2019-03-01 11:03:08.890045588 -0300 +++ /tmp/report.after.3 2019-03-01 11:09:40.660224002 -0300 @@ -22,5 +22,5 @@ # -# (Tip: Order by the overhead of source file name and line number: perf report -s srcline) +# (Tip: List events using substring match: perf list <keyword>) # $ diff -u /tmp/script.before.3 /tmp/script.after.3 $ Cool, just the 'perf report' tips changed, QED. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1551435186-6008-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-01 18:13:06 +08:00
error:
free(ptime_range);
return ret;
}
int timestamp__scnprintf_usec(u64 timestamp, char *buf, size_t sz)
{
u64 sec = timestamp / NSEC_PER_SEC;
u64 usec = (timestamp % NSEC_PER_SEC) / NSEC_PER_USEC;
return scnprintf(buf, sz, "%"PRIu64".%06"PRIu64, sec, usec);
}
int timestamp__scnprintf_nsec(u64 timestamp, char *buf, size_t sz)
{
u64 sec = timestamp / NSEC_PER_SEC,
nsec = timestamp % NSEC_PER_SEC;
return scnprintf(buf, sz, "%" PRIu64 ".%09" PRIu64, sec, nsec);
}
int fetch_current_timestamp(char *buf, size_t sz)
{
struct timeval tv;
struct tm tm;
char dt[32];
if (gettimeofday(&tv, NULL) || !localtime_r(&tv.tv_sec, &tm))
return -1;
if (!strftime(dt, sizeof(dt), "%Y%m%d%H%M%S", &tm))
return -1;
scnprintf(buf, sz, "%s%02u", dt, (unsigned)tv.tv_usec / 10000);
return 0;
}