openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts

1136 lines
30 KiB
Plaintext
Raw Normal View History

arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "tegra132.dtsi"
/ {
model = "NVIDIA Tegra132 Norrin";
compatible = "nvidia,norrin", "nvidia,tegra132", "nvidia,tegra124";
aliases {
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
rtc0 = "/i2c@7000d000/as3722@40";
rtc1 = "/rtc@7000e000";
arm64: tegra: Add stdout-path for various boards For Tegra boards, the device-tree alias serial0 is used for the console and so add the stdout-path information so that the console no longer needs to be passed via the kernel boot parameters. For tegra132-norrin the alias serial0 is not defined and so add this. This has been tested on tegra132-norrin and tegra210-p2371-0000. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-09 21:52:00 +08:00
serial0 = &uarta;
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
};
arm64: tegra: Add stdout-path for various boards For Tegra boards, the device-tree alias serial0 is used for the console and so add the stdout-path information so that the console no longer needs to be passed via the kernel boot parameters. For tegra132-norrin the alias serial0 is not defined and so add this. This has been tested on tegra132-norrin and tegra210-p2371-0000. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-09 21:52:00 +08:00
chosen {
stdout-path = "serial0:115200n8";
};
ARM64: tegra: Add chosen node for tegra132 norrin The NVIDIA bootloader, nvtboot, expects the "chosen" node to be present in the device-tree blob and if it is not then it fails to boot the kernel. Add the chosen node so we can boot the kernel on Tegra132 Norrin with the nvtboot bootloader. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-01-26 04:25:55 +08:00
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
memory {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>;
};
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
host1x@50000000 {
hdmi@54280000 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
status = "disabled";
vdd-supply = <&vdd_3v3_hdmi>;
pll-supply = <&vdd_hdmi_pll>;
hdmi-supply = <&vdd_5v0_hdmi>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
};
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
sor@54540000 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
status = "okay";
nvidia,dpaux = <&dpaux>;
nvidia,panel = <&panel>;
};
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
dpaux: dpaux@545c0000 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
vdd-supply = <&vdd_3v3_panel>;
status = "okay";
};
};
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
gpu@57000000 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
status = "okay";
vdd-supply = <&vdd_gpu>;
};
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
pinmux@70000868 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
pinctrl-names = "default";
pinctrl-0 = <&pinmux_default>;
pinmux_default: pinmux@0 {
dap_mclk1_pw4 {
nvidia,pins = "dap_mclk1_pw4";
nvidia,function = "extperiph1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
dap2_din_pa4 {
nvidia,pins = "dap2_din_pa4";
nvidia,function = "i2s1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
dap2_dout_pa5 {
nvidia,pins = "dap2_dout_pa5",
"dap2_fs_pa2",
"dap2_sclk_pa3";
nvidia,function = "i2s1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
dap3_dout_pp2 {
nvidia,pins = "dap3_dout_pp2";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
dvfs_pwm_px0 {
nvidia,pins = "dvfs_pwm_px0",
"dvfs_clk_px2";
nvidia,function = "cldvfs";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
ulpi_clk_py0 {
nvidia,pins = "ulpi_clk_py0",
"ulpi_nxt_py2",
"ulpi_stp_py3";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
ulpi_dir_py1 {
nvidia,pins = "ulpi_dir_py1";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
cam_i2c_scl_pbb1 {
nvidia,pins = "cam_i2c_scl_pbb1",
"cam_i2c_sda_pbb2";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
gen2_i2c_scl_pt5 {
nvidia,pins = "gen2_i2c_scl_pt5",
"gen2_i2c_sda_pt6";
nvidia,function = "i2c2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
pj7 {
nvidia,pins = "pj7";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
spdif_in_pk6 {
nvidia,pins = "spdif_in_pk6";
nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
pk7 {
nvidia,pins = "pk7";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
pg4 {
nvidia,pins = "pg4",
"pg5",
"pg6",
"pi3";
nvidia,function = "spi4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
pg7 {
nvidia,pins = "pg7";
nvidia,function = "spi4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
ph1 {
nvidia,pins = "ph1";
nvidia,function = "pwm1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
pk0 {
nvidia,pins = "pk0",
"kb_row15_ps7",
"clk_32k_out_pa0";
nvidia,function = "soc";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sdmmc1_clk_pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sdmmc1_cmd_pz1 {
nvidia,pins = "sdmmc1_cmd_pz1",
"sdmmc1_dat0_py7",
"sdmmc1_dat1_py6",
"sdmmc1_dat2_py5",
"sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sdmmc3_clk_pa6 {
nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sdmmc3_cmd_pa7 {
nvidia,pins = "sdmmc3_cmd_pa7",
"sdmmc3_dat0_pb7",
"sdmmc3_dat1_pb6",
"sdmmc3_dat2_pb5",
"sdmmc3_dat3_pb4",
"kb_col4_pq4",
"sdmmc3_clk_lb_out_pee4",
"sdmmc3_clk_lb_in_pee5",
"sdmmc3_cd_n_pv2";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sdmmc4_clk_pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sdmmc4_cmd_pt7 {
nvidia,pins = "sdmmc4_cmd_pt7",
"sdmmc4_dat0_paa0",
"sdmmc4_dat1_paa1",
"sdmmc4_dat2_paa2",
"sdmmc4_dat3_paa3",
"sdmmc4_dat4_paa4",
"sdmmc4_dat5_paa5",
"sdmmc4_dat6_paa6",
"sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
mic_det_l {
nvidia,pins = "kb_row7_pr7";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
kb_row10_ps2 {
nvidia,pins = "kb_row10_ps2";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
kb_row9_ps1 {
nvidia,pins = "kb_row9_ps1";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
pwr_i2c_scl_pz6 {
nvidia,pins = "pwr_i2c_scl_pz6",
"pwr_i2c_sda_pz7";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
jtag_rtck {
nvidia,pins = "jtag_rtck";
nvidia,function = "rtck";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
clk_32k_in {
nvidia,pins = "clk_32k_in";
nvidia,function = "clk";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
core_pwr_req {
nvidia,pins = "core_pwr_req";
nvidia,function = "pwron";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
cpu_pwr_req {
nvidia,pins = "cpu_pwr_req";
nvidia,function = "cpu";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
kb_col0_ap {
nvidia,pins = "kb_col0_pq0";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
en_vdd_sd {
nvidia,pins = "kb_row0_pr0";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
lid_open {
nvidia,pins = "kb_row4_pr4";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
pwr_int_n {
nvidia,pins = "pwr_int_n";
nvidia,function = "pmi";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
reset_out_n {
nvidia,pins = "reset_out_n";
nvidia,function = "reset_out_n";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
clk3_out_pee0 {
nvidia,pins = "clk3_out_pee0";
nvidia,function = "extperiph3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
gen1_i2c_scl_pc4 {
nvidia,pins = "gen1_i2c_scl_pc4",
"gen1_i2c_sda_pc5";
nvidia,function = "i2c1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
hdmi_cec_pee3 {
nvidia,pins = "hdmi_cec_pee3";
nvidia,function = "cec";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
hdmi_int_pn7 {
nvidia,pins = "hdmi_int_pn7";
nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
ddc_scl_pv4 {
nvidia,pins = "ddc_scl_pv4",
"ddc_sda_pv5";
nvidia,function = "i2c4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
};
usb_vbus_en0_pn4 {
nvidia,pins = "usb_vbus_en0_pn4",
"usb_vbus_en1_pn5",
"usb_vbus_en2_pff1";
nvidia,function = "usb";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
drive_sdio1 {
nvidia,pins = "drive_sdio1";
nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
nvidia,schmitt = <TEGRA_PIN_DISABLE>;
nvidia,pull-down-strength = <36>;
nvidia,pull-up-strength = <20>;
nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
};
drive_sdio3 {
nvidia,pins = "drive_sdio3";
nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
nvidia,schmitt = <TEGRA_PIN_DISABLE>;
nvidia,pull-down-strength = <22>;
nvidia,pull-up-strength = <36>;
nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
};
drive_gma {
nvidia,pins = "drive_gma";
nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
nvidia,schmitt = <TEGRA_PIN_DISABLE>;
nvidia,pull-down-strength = <2>;
nvidia,pull-up-strength = <1>;
nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
nvidia,drive-type = <1>;
};
ac_ok {
nvidia,pins = "pj0";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
codec_irq_l {
nvidia,pins = "ph4";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
lcd_bl_en {
nvidia,pins = "ph2";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
touch_irq_l {
nvidia,pins = "gpio_w3_aud_pw3";
nvidia,function = "spi6";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
tpm_davint_l {
nvidia,pins = "ph6";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
ts_irq_l {
nvidia,pins = "pk2";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
ts_reset_l {
nvidia,pins = "pk4";
nvidia,function = "gmi";
nvidia,pull = <1>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
ts_shdn_l {
nvidia,pins = "pk1";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
ph7 {
nvidia,pins = "ph7";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sensor_irq_l {
nvidia,pins = "pi6";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
wifi_en {
nvidia,pins = "gpio_x7_aud_px7";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
chromeos_write_protect {
nvidia,pins = "kb_row1_pr1";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
hp_det_l {
nvidia,pins = "pi7";
nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
soc_warm_reset_l {
nvidia,pins = "pi5";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
};
};
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
serial@70006000 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
status = "okay";
};
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
pwm: pwm@7000a000 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
status = "okay";
};
/* HDMI DDC */
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
hdmi_ddc: i2c@7000c700 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
status = "okay";
clock-frequency = <100000>;
};
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
i2c@7000d000 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
status = "okay";
clock-frequency = <400000>;
as3722: pmic@40 {
compatible = "ams,as3722";
reg = <0x40>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
ams,system-power-controller;
#interrupt-cells = <2>;
interrupt-controller;
#gpio-cells = <2>;
gpio-controller;
pinctrl-names = "default";
pinctrl-0 = <&as3722_default>;
as3722_default: pinmux@0 {
gpio0 {
pins = "gpio0";
function = "gpio";
bias-pull-down;
};
gpio1 {
pins = "gpio1";
function = "gpio";
bias-pull-up;
};
gpio2_4_7 {
pins = "gpio2", "gpio4", "gpio7";
function = "gpio";
bias-pull-up;
};
gpio3 {
pins = "gpio3";
function = "gpio";
bias-high-impedance;
};
gpio5 {
pins = "gpio5";
function = "clk32k-out";
bias-pull-down;
};
gpio6 {
pins = "gpio6";
function = "clk32k-out";
bias-pull-down;
};
};
regulators {
vsup-sd2-supply = <&vdd_5v0_sys>;
vsup-sd3-supply = <&vdd_5v0_sys>;
vsup-sd4-supply = <&vdd_5v0_sys>;
vsup-sd5-supply = <&vdd_5v0_sys>;
vin-ldo0-supply = <&vdd_1v35_lp0>;
vin-ldo1-6-supply = <&vdd_3v3_sys>;
vin-ldo2-5-7-supply = <&vddio_1v8>;
vin-ldo3-4-supply = <&vdd_3v3_sys>;
vin-ldo9-10-supply = <&vdd_5v0_sys>;
vin-ldo11-supply = <&vdd_3v3_run>;
sd0 {
regulator-name = "+VDD_CPU_AP";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
regulator-max-microamp = <3500000>;
regulator-always-on;
regulator-boot-on;
ams,ext-control = <2>;
};
sd1 {
regulator-name = "+VDD_CORE";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
regulator-max-microamp = <4000000>;
regulator-always-on;
regulator-boot-on;
ams,ext-control = <1>;
};
vdd_1v35_lp0: sd2 {
regulator-name = "+1.35V_LP0(sd2)";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
sd3 {
regulator-name = "+1.35V_LP0(sd3)";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
vdd_1v05_run: sd4 {
regulator-name = "+1.05V_RUN";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
vddio_1v8: sd5 {
regulator-name = "+1.8V_VDDIO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
vdd_gpu: sd6 {
regulator-name = "+VDD_GPU_AP";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1200000>;
regulator-min-microamp = <3500000>;
regulator-max-microamp = <3500000>;
regulator-always-on;
regulator-boot-on;
};
ldo0 {
regulator-name = "+1.05_RUN_AVDD";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
regulator-boot-on;
ams,ext-control = <1>;
};
ldo1 {
regulator-name = "+1.8V_RUN_CAM";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo2 {
regulator-name = "+1.2V_GEN_AVDD";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
ldo3 {
regulator-name = "+1.00V_LP0_VDD_RTC";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
ams,enable-tracking;
};
vdd_run_cam: ldo4 {
regulator-name = "+2.8V_RUN_CAM";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo5 {
regulator-name = "+1.2V_RUN_CAM_FRONT";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
vddio_sdmmc3: ldo6 {
regulator-name = "+VDDIO_SDMMC3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
ldo7 {
regulator-name = "+1.05V_RUN_CAM_REAR";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
ldo9 {
regulator-name = "+2.8V_RUN_TOUCH";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo10 {
regulator-name = "+2.8V_RUN_CAM_AF";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo11 {
regulator-name = "+1.8V_RUN_VPP_FUSE";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
};
};
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
spi@7000d400 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
status = "okay";
ec: cros-ec@0 {
compatible = "google,cros-ec-spi";
spi-max-frequency = <3000000>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
reg = <0>;
google,cros-ec-spi-msg-delay = <2000>;
i2c_20: i2c-tunnel {
compatible = "google,cros-ec-i2c-tunnel";
#address-cells = <1>;
#size-cells = <0>;
google,remote-bus = <0>;
charger: bq24735 {
compatible = "ti,bq24735";
reg = <0x9>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(J, 0)
GPIO_ACTIVE_HIGH>;
ti,ac-detect-gpios = <&gpio
TEGRA_GPIO(J, 0)
GPIO_ACTIVE_HIGH>;
};
battery: smart-battery {
compatible = "sbs,sbs-battery";
reg = <0xb>;
battery-name = "battery";
sbs,i2c-retry-count = <2>;
sbs,poll-retry-count = <10>;
/* power-supplies = <&charger>; */
};
};
keyboard-controller {
compatible = "google,cros-ec-keyb";
keypad,num-rows = <8>;
keypad,num-columns = <13>;
google,needs-ghost-filter;
linux,keymap =
<MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
MATRIX_KEY(0x00, 0x02, KEY_F1)
MATRIX_KEY(0x00, 0x03, KEY_B)
MATRIX_KEY(0x00, 0x04, KEY_F10)
MATRIX_KEY(0x00, 0x06, KEY_N)
MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
MATRIX_KEY(0x01, 0x01, KEY_ESC)
MATRIX_KEY(0x01, 0x02, KEY_F4)
MATRIX_KEY(0x01, 0x03, KEY_G)
MATRIX_KEY(0x01, 0x04, KEY_F7)
MATRIX_KEY(0x01, 0x06, KEY_H)
MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
MATRIX_KEY(0x01, 0x09, KEY_F9)
MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
MATRIX_KEY(0x02, 0x01, KEY_TAB)
MATRIX_KEY(0x02, 0x02, KEY_F3)
MATRIX_KEY(0x02, 0x03, KEY_T)
MATRIX_KEY(0x02, 0x04, KEY_F6)
MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
MATRIX_KEY(0x02, 0x06, KEY_Y)
MATRIX_KEY(0x02, 0x07, KEY_102ND)
MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
MATRIX_KEY(0x02, 0x09, KEY_F8)
MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
MATRIX_KEY(0x03, 0x02, KEY_F2)
MATRIX_KEY(0x03, 0x03, KEY_5)
MATRIX_KEY(0x03, 0x04, KEY_F5)
MATRIX_KEY(0x03, 0x06, KEY_6)
MATRIX_KEY(0x03, 0x08, KEY_MINUS)
MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
MATRIX_KEY(0x04, 0x01, KEY_A)
MATRIX_KEY(0x04, 0x02, KEY_D)
MATRIX_KEY(0x04, 0x03, KEY_F)
MATRIX_KEY(0x04, 0x04, KEY_S)
MATRIX_KEY(0x04, 0x05, KEY_K)
MATRIX_KEY(0x04, 0x06, KEY_J)
MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
MATRIX_KEY(0x04, 0x09, KEY_L)
MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
MATRIX_KEY(0x05, 0x01, KEY_Z)
MATRIX_KEY(0x05, 0x02, KEY_C)
MATRIX_KEY(0x05, 0x03, KEY_V)
MATRIX_KEY(0x05, 0x04, KEY_X)
MATRIX_KEY(0x05, 0x05, KEY_COMMA)
MATRIX_KEY(0x05, 0x06, KEY_M)
MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
MATRIX_KEY(0x05, 0x08, KEY_SLASH)
MATRIX_KEY(0x05, 0x09, KEY_DOT)
MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
MATRIX_KEY(0x06, 0x01, KEY_1)
MATRIX_KEY(0x06, 0x02, KEY_3)
MATRIX_KEY(0x06, 0x03, KEY_4)
MATRIX_KEY(0x06, 0x04, KEY_2)
MATRIX_KEY(0x06, 0x05, KEY_8)
MATRIX_KEY(0x06, 0x06, KEY_7)
MATRIX_KEY(0x06, 0x08, KEY_0)
MATRIX_KEY(0x06, 0x09, KEY_9)
MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
MATRIX_KEY(0x07, 0x01, KEY_Q)
MATRIX_KEY(0x07, 0x02, KEY_E)
MATRIX_KEY(0x07, 0x03, KEY_R)
MATRIX_KEY(0x07, 0x04, KEY_W)
MATRIX_KEY(0x07, 0x05, KEY_I)
MATRIX_KEY(0x07, 0x06, KEY_U)
MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
MATRIX_KEY(0x07, 0x08, KEY_P)
MATRIX_KEY(0x07, 0x09, KEY_O)
MATRIX_KEY(0x07, 0x0b, KEY_UP)
MATRIX_KEY(0x07, 0x0c, KEY_LEFT)>;
};
};
};
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
pmc@7000e400 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
nvidia,invert-interrupt;
nvidia,suspend-mode = <0>;
#wake-cells = <3>;
nvidia,cpu-pwr-good-time = <500>;
nvidia,cpu-pwr-off-time = <300>;
nvidia,core-pwr-good-time = <641 3845>;
nvidia,core-pwr-off-time = <61036>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
nvidia,reset-gpio = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
};
/* WIFI/BT module */
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
sdhci@700b0000 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
status = "disabled";
};
/* external SD/MMC */
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
sdhci@700b0400 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
status = "okay";
bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc3>;
};
/* EMMC 4.51 */
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
sdhci@700b0600 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
status = "okay";
bus-width = <8>;
non-removable;
};
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
usb@7d000000 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
status = "okay";
};
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
usb-phy@7d000000 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
status = "okay";
vbus-supply = <&vdd_usb1_vbus>;
};
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
usb@7d004000 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
status = "okay";
};
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
usb-phy@7d004000 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
status = "okay";
vbus-supply = <&vdd_run_cam>;
};
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
usb@7d008000 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
status = "okay";
};
arm64: tegra: Remove 0, prefix from unit-addresses When Tegra124 support was first merged the unit-addresses of all devices were listed with a "0," prefix to encode the reg property's second cell. It turns out that this notation is not correct, and the "," separator is only used to separate fields in the unit address (such as the device and function number in PCI devices), not individual cells for addresses with more than one cell. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-11 21:35:06 +08:00
usb-phy@7d008000 {
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
status = "okay";
vbus-supply = <&vdd_usb3_vbus>;
};
backlight: backlight {
compatible = "pwm-backlight";
enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
power-supply = <&vdd_led>;
pwms = <&pwm 1 1000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
backlight-boot-off;
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
gpio-keys {
compatible = "gpio-keys";
lid {
label = "Lid";
gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
linux,input-type = <5>;
linux,code = <0>;
debounce-interval = <1>;
arm64: tegra: Replace legacy *,wakeup property with wakeup-source Though the keyboard and other driver will continue to support the legacy "gpio-key,wakeup", "nvidia,wakeup-source" boolean property to enable the wakeup source, "wakeup-source" is the new standard binding. This patch replaces all the legacy wakeup properties with the unified "wakeup-source" property in order to avoid any further copy-paste duplication. Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-tegra@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-09 05:55:43 +08:00
wakeup-source;
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
};
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
debounce-interval = <10>;
arm64: tegra: Replace legacy *,wakeup property with wakeup-source Though the keyboard and other driver will continue to support the legacy "gpio-key,wakeup", "nvidia,wakeup-source" boolean property to enable the wakeup source, "wakeup-source" is the new standard binding. This patch replaces all the legacy wakeup properties with the unified "wakeup-source" property in order to avoid any further copy-paste duplication. Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-tegra@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-09 05:55:43 +08:00
wakeup-source;
arm64: tegra: Add NVIDIA Tegra132 Norrin support Norrin is a Tegra132-based FFD used as reference platform within NVIDIA. Based on work by Allen Martin <amartin@nvidia.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:31:52 +08:00
};
};
panel: panel {
compatible = "innolux,n116bge", "simple-panel";
backlight = <&backlight>;
ddc-i2c-bus = <&dpaux>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
vdd_mux: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "+VDD_MUX";
regulator-min-microvolt = <19000000>;
regulator-max-microvolt = <19000000>;
regulator-always-on;
regulator-boot-on;
};
vdd_5v0_sys: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "+5V_SYS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vdd_mux>;
};
vdd_3v3_sys: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "+3.3V_SYS";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vdd_mux>;
};
vdd_3v3_run: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "+3.3V_RUN";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
vdd_3v3_hdmi: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vdd_3v3_run>;
};
vdd_led: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "+VDD_LED";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_mux>;
};
vdd_usb1_vbus: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
regulator-name = "+5V_USB_HS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
enable-active-high;
gpio-open-drain;
vin-supply = <&vdd_5v0_sys>;
};
vdd_usb3_vbus: regulator@7 {
compatible = "regulator-fixed";
reg = <7>;
regulator-name = "+5V_USB_SS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
enable-active-high;
gpio-open-drain;
vin-supply = <&vdd_5v0_sys>;
};
vdd_3v3_panel: regulator@8 {
compatible = "regulator-fixed";
reg = <8>;
regulator-name = "+3.3V_PANEL";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&as3722 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
vdd_hdmi_pll: regulator@9 {
compatible = "regulator-fixed";
reg = <9>;
regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
vin-supply = <&vdd_1v05_run>;
};
vdd_5v0_hdmi: regulator@10 {
compatible = "regulator-fixed";
reg = <10>;
regulator-name = "+5V_HDMI_CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
vdd_5v0_ts: regulator@11 {
compatible = "regulator-fixed";
reg = <11>;
regulator-name = "+5V_VDD_TS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
};