openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/sound/pci/rme32.c

1995 lines
58 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* ALSA driver for RME Digi32, Digi32/8 and Digi32 PRO audio interfaces
*
* Copyright (c) 2002-2004 Martin Langer <martin-langer@gmx.de>,
* Pilo Chambert <pilo.c@wanadoo.fr>
*
* Thanks to : Anders Torger <torger@ludd.luth.se>,
* Henk Hesselink <henk@anda.nl>
* for writing the digi96-driver
* and RME for all informations.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*
* ****************************************************************************
*
* Note #1 "Sek'd models" ................................... martin 2002-12-07
*
* Identical soundcards by Sek'd were labeled:
* RME Digi 32 = Sek'd Prodif 32
* RME Digi 32 Pro = Sek'd Prodif 96
* RME Digi 32/8 = Sek'd Prodif Gold
*
* ****************************************************************************
*
* Note #2 "full duplex mode" ............................... martin 2002-12-07
*
* Full duplex doesn't work. All cards (32, 32/8, 32Pro) are working identical
* in this mode. Rec data and play data are using the same buffer therefore. At
* first you have got the playing bits in the buffer and then (after playing
* them) they were overwitten by the captured sound of the CS8412/14. Both
* modes (play/record) are running harmonically hand in hand in the same buffer
* and you have only one start bit plus one interrupt bit to control this
* paired action.
* This is opposite to the latter rme96 where playing and capturing is totally
* separated and so their full duplex mode is supported by alsa (using two
* start bits and two interrupts for two different buffers).
* But due to the wrong sequence of playing and capturing ALSA shows no solved
* full duplex support for the rme32 at the moment. That's bad, but I'm not
* able to solve it. Are you motivated enough to solve this problem now? Your
* patch would be welcome!
*
* ****************************************************************************
*
* "The story after the long seeking" -- tiwai
*
* Ok, the situation regarding the full duplex is now improved a bit.
* In the fullduplex mode (given by the module parameter), the hardware buffer
* is split to halves for read and write directions at the DMA pointer.
* That is, the half above the current DMA pointer is used for write, and
* the half below is used for read. To mangle this strange behavior, an
* software intermediate buffer is introduced. This is, of course, not good
* from the viewpoint of the data transfer efficiency. However, this allows
* you to use arbitrary buffer sizes, instead of the fixed I/O buffer size.
*
* ****************************************************************************
*/
#include <linux/delay.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/gfp.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
sound: fix drivers needing module.h not moduleparam.h The implicit presence of module.h lured several users into incorrectly thinking that they only needed/used modparam.h but once we clean up the module.h presence, these will show up as build failures, so fix 'em now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-16 01:13:37 +08:00
#include <linux/module.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/pcm-indirect.h>
#include <sound/asoundef.h>
#include <sound/initval.h>
#include <asm/io.h>
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
ALSA: module_param: make bool parameters really bool module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-15 11:19:36 +08:00
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */
static bool fullduplex[SNDRV_CARDS]; // = {[0 ... (SNDRV_CARDS - 1)] = 1};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for RME Digi32 soundcard.");
module_param_array(id, charp, NULL, 0444);
MODULE_PARM_DESC(id, "ID string for RME Digi32 soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable RME Digi32 soundcard.");
module_param_array(fullduplex, bool, NULL, 0444);
MODULE_PARM_DESC(fullduplex, "Support full-duplex mode.");
MODULE_AUTHOR("Martin Langer <martin-langer@gmx.de>, Pilo Chambert <pilo.c@wanadoo.fr>");
MODULE_DESCRIPTION("RME Digi32, Digi32/8, Digi32 PRO");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{RME,Digi32}," "{RME,Digi32/8}," "{RME,Digi32 PRO}}");
/* Defines for RME Digi32 series */
#define RME32_SPDIF_NCHANNELS 2
/* Playback and capture buffer size */
#define RME32_BUFFER_SIZE 0x20000
/* IO area size */
#define RME32_IO_SIZE 0x30000
/* IO area offsets */
#define RME32_IO_DATA_BUFFER 0x0
#define RME32_IO_CONTROL_REGISTER 0x20000
#define RME32_IO_GET_POS 0x20000
#define RME32_IO_CONFIRM_ACTION_IRQ 0x20004
#define RME32_IO_RESET_POS 0x20100
/* Write control register bits */
#define RME32_WCR_START (1 << 0) /* startbit */
#define RME32_WCR_MONO (1 << 1) /* 0=stereo, 1=mono
Setting the whole card to mono
doesn't seem to be very useful.
A software-solution can handle
full-duplex with one direction in
stereo and the other way in mono.
So, the hardware should work all
the time in stereo! */
#define RME32_WCR_MODE24 (1 << 2) /* 0=16bit, 1=32bit */
#define RME32_WCR_SEL (1 << 3) /* 0=input on output, 1=normal playback/capture */
#define RME32_WCR_FREQ_0 (1 << 4) /* frequency (play) */
#define RME32_WCR_FREQ_1 (1 << 5)
#define RME32_WCR_INP_0 (1 << 6) /* input switch */
#define RME32_WCR_INP_1 (1 << 7)
#define RME32_WCR_RESET (1 << 8) /* Reset address */
#define RME32_WCR_MUTE (1 << 9) /* digital mute for output */
#define RME32_WCR_PRO (1 << 10) /* 1=professional, 0=consumer */
#define RME32_WCR_DS_BM (1 << 11) /* 1=DoubleSpeed (only PRO-Version); 1=BlockMode (only Adat-Version) */
#define RME32_WCR_ADAT (1 << 12) /* Adat Mode (only Adat-Version) */
#define RME32_WCR_AUTOSYNC (1 << 13) /* AutoSync */
#define RME32_WCR_PD (1 << 14) /* DAC Reset (only PRO-Version) */
#define RME32_WCR_EMP (1 << 15) /* 1=Emphasis on (only PRO-Version) */
#define RME32_WCR_BITPOS_FREQ_0 4
#define RME32_WCR_BITPOS_FREQ_1 5
#define RME32_WCR_BITPOS_INP_0 6
#define RME32_WCR_BITPOS_INP_1 7
/* Read control register bits */
#define RME32_RCR_AUDIO_ADDR_MASK 0x1ffff
#define RME32_RCR_LOCK (1 << 23) /* 1=locked, 0=not locked */
#define RME32_RCR_ERF (1 << 26) /* 1=Error, 0=no Error */
#define RME32_RCR_FREQ_0 (1 << 27) /* CS841x frequency (record) */
#define RME32_RCR_FREQ_1 (1 << 28)
#define RME32_RCR_FREQ_2 (1 << 29)
#define RME32_RCR_KMODE (1 << 30) /* card mode: 1=PLL, 0=quartz */
#define RME32_RCR_IRQ (1 << 31) /* interrupt */
#define RME32_RCR_BITPOS_F0 27
#define RME32_RCR_BITPOS_F1 28
#define RME32_RCR_BITPOS_F2 29
/* Input types */
#define RME32_INPUT_OPTICAL 0
#define RME32_INPUT_COAXIAL 1
#define RME32_INPUT_INTERNAL 2
#define RME32_INPUT_XLR 3
/* Clock modes */
#define RME32_CLOCKMODE_SLAVE 0
#define RME32_CLOCKMODE_MASTER_32 1
#define RME32_CLOCKMODE_MASTER_44 2
#define RME32_CLOCKMODE_MASTER_48 3
/* Block sizes in bytes */
#define RME32_BLOCK_SIZE 8192
/* Software intermediate buffer (max) size */
#define RME32_MID_BUFFER_SIZE (1024*1024)
/* Hardware revisions */
#define RME32_32_REVISION 192
#define RME32_328_REVISION_OLD 100
#define RME32_328_REVISION_NEW 101
#define RME32_PRO_REVISION_WITH_8412 192
#define RME32_PRO_REVISION_WITH_8414 150
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spinlock_t lock;
int irq;
unsigned long port;
void __iomem *iobase;
u32 wcreg; /* cached write control register value */
u32 wcreg_spdif; /* S/PDIF setup */
u32 wcreg_spdif_stream; /* S/PDIF setup (temporary) */
u32 rcreg; /* cached read control register value */
u8 rev; /* card revision number */
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct snd_pcm_substream *playback_substream;
struct snd_pcm_substream *capture_substream;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int playback_frlog; /* log2 of framesize */
int capture_frlog;
size_t playback_periodsize; /* in bytes, zero if not used */
size_t capture_periodsize; /* in bytes, zero if not used */
unsigned int fullduplex_mode;
int running;
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct snd_pcm_indirect playback_pcm;
struct snd_pcm_indirect capture_pcm;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct snd_card *card;
struct snd_pcm *spdif_pcm;
struct snd_pcm *adat_pcm;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct pci_dev *pci;
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct snd_kcontrol *spdif_ctl;
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
sound: use DEFINE_PCI_DEVICE_TABLE Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to .devinit.rodata section, so they can be discarded in some cases, and make them const. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-06 06:21:03 +08:00
static DEFINE_PCI_DEVICE_TABLE(snd_rme32_ids) = {
sound: Use PCI_VDEVICE Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-25 13:13:35 +08:00
{PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32), 0,},
{PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8), 0,},
{PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_PRO), 0,},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{0,}
};
MODULE_DEVICE_TABLE(pci, snd_rme32_ids);
#define RME32_ISWORKING(rme32) ((rme32)->wcreg & RME32_WCR_START)
[PATCH] add PCI IDs so RME32 and RME96 drivers build While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15 05:19:17 +08:00
#define RME32_PRO_WITH_8414(rme32) ((rme32)->pci->device == PCI_DEVICE_ID_RME_DIGI32_PRO && (rme32)->rev == RME32_PRO_REVISION_WITH_8414)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_playback_prepare(struct snd_pcm_substream *substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_capture_prepare(struct snd_pcm_substream *substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_pcm_trigger(struct snd_pcm_substream *substream, int cmd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static void snd_rme32_proc_init(struct rme32 * rme32);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_create_switches(struct snd_card *card, struct rme32 * rme32);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static inline unsigned int snd_rme32_pcm_byteptr(struct rme32 * rme32)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
return (readl(rme32->iobase + RME32_IO_GET_POS)
& RME32_RCR_AUDIO_ADDR_MASK);
}
/* silence callback for halfduplex mode */
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_playback_silence(struct snd_pcm_substream *substream, int channel, /* not used (interleaved data) */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
snd_pcm_uframes_t pos,
snd_pcm_uframes_t count)
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
count <<= rme32->playback_frlog;
pos <<= rme32->playback_frlog;
memset_io(rme32->iobase + RME32_IO_DATA_BUFFER + pos, 0, count);
return 0;
}
/* copy callback for halfduplex mode */
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_playback_copy(struct snd_pcm_substream *substream, int channel, /* not used (interleaved data) */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
snd_pcm_uframes_t pos,
void __user *src, snd_pcm_uframes_t count)
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
count <<= rme32->playback_frlog;
pos <<= rme32->playback_frlog;
if (copy_from_user_toio(rme32->iobase + RME32_IO_DATA_BUFFER + pos,
src, count))
return -EFAULT;
return 0;
}
/* copy callback for halfduplex mode */
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_capture_copy(struct snd_pcm_substream *substream, int channel, /* not used (interleaved data) */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
snd_pcm_uframes_t pos,
void __user *dst, snd_pcm_uframes_t count)
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
count <<= rme32->capture_frlog;
pos <<= rme32->capture_frlog;
if (copy_to_user_fromio(dst,
rme32->iobase + RME32_IO_DATA_BUFFER + pos,
count))
return -EFAULT;
return 0;
}
/*
[PATCH] Typo fixes Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 17:56:53 +08:00
* SPDIF I/O capabilities (half-duplex mode)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static struct snd_pcm_hardware snd_rme32_spdif_info = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.info = (SNDRV_PCM_INFO_MMAP_IOMEM |
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_PAUSE |
SNDRV_PCM_INFO_SYNC_START),
.formats = (SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S32_LE),
.rates = (SNDRV_PCM_RATE_32000 |
SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000),
.rate_min = 32000,
.rate_max = 48000,
.channels_min = 2,
.channels_max = 2,
.buffer_bytes_max = RME32_BUFFER_SIZE,
.period_bytes_min = RME32_BLOCK_SIZE,
.period_bytes_max = RME32_BLOCK_SIZE,
.periods_min = RME32_BUFFER_SIZE / RME32_BLOCK_SIZE,
.periods_max = RME32_BUFFER_SIZE / RME32_BLOCK_SIZE,
.fifo_size = 0,
};
/*
[PATCH] Typo fixes Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 17:56:53 +08:00
* ADAT I/O capabilities (half-duplex mode)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static struct snd_pcm_hardware snd_rme32_adat_info =
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
.info = (SNDRV_PCM_INFO_MMAP_IOMEM |
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_PAUSE |
SNDRV_PCM_INFO_SYNC_START),
.formats= SNDRV_PCM_FMTBIT_S16_LE,
.rates = (SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000),
.rate_min = 44100,
.rate_max = 48000,
.channels_min = 8,
.channels_max = 8,
.buffer_bytes_max = RME32_BUFFER_SIZE,
.period_bytes_min = RME32_BLOCK_SIZE,
.period_bytes_max = RME32_BLOCK_SIZE,
.periods_min = RME32_BUFFER_SIZE / RME32_BLOCK_SIZE,
.periods_max = RME32_BUFFER_SIZE / RME32_BLOCK_SIZE,
.fifo_size = 0,
};
/*
[PATCH] Typo fixes Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 17:56:53 +08:00
* SPDIF I/O capabilities (full-duplex mode)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static struct snd_pcm_hardware snd_rme32_spdif_fd_info = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_PAUSE |
SNDRV_PCM_INFO_SYNC_START),
.formats = (SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S32_LE),
.rates = (SNDRV_PCM_RATE_32000 |
SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000),
.rate_min = 32000,
.rate_max = 48000,
.channels_min = 2,
.channels_max = 2,
.buffer_bytes_max = RME32_MID_BUFFER_SIZE,
.period_bytes_min = RME32_BLOCK_SIZE,
.period_bytes_max = RME32_BLOCK_SIZE,
.periods_min = 2,
.periods_max = RME32_MID_BUFFER_SIZE / RME32_BLOCK_SIZE,
.fifo_size = 0,
};
/*
[PATCH] Typo fixes Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 17:56:53 +08:00
* ADAT I/O capabilities (full-duplex mode)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static struct snd_pcm_hardware snd_rme32_adat_fd_info =
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_PAUSE |
SNDRV_PCM_INFO_SYNC_START),
.formats= SNDRV_PCM_FMTBIT_S16_LE,
.rates = (SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000),
.rate_min = 44100,
.rate_max = 48000,
.channels_min = 8,
.channels_max = 8,
.buffer_bytes_max = RME32_MID_BUFFER_SIZE,
.period_bytes_min = RME32_BLOCK_SIZE,
.period_bytes_max = RME32_BLOCK_SIZE,
.periods_min = 2,
.periods_max = RME32_MID_BUFFER_SIZE / RME32_BLOCK_SIZE,
.fifo_size = 0,
};
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static void snd_rme32_reset_dac(struct rme32 *rme32)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
writel(rme32->wcreg | RME32_WCR_PD,
rme32->iobase + RME32_IO_CONTROL_REGISTER);
writel(rme32->wcreg, rme32->iobase + RME32_IO_CONTROL_REGISTER);
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_playback_getrate(struct rme32 * rme32)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int rate;
rate = ((rme32->wcreg >> RME32_WCR_BITPOS_FREQ_0) & 1) +
(((rme32->wcreg >> RME32_WCR_BITPOS_FREQ_1) & 1) << 1);
switch (rate) {
case 1:
rate = 32000;
break;
case 2:
rate = 44100;
break;
case 3:
rate = 48000;
break;
default:
return -1;
}
return (rme32->wcreg & RME32_WCR_DS_BM) ? rate << 1 : rate;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_capture_getrate(struct rme32 * rme32, int *is_adat)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int n;
*is_adat = 0;
if (rme32->rcreg & RME32_RCR_LOCK) {
/* ADAT rate */
*is_adat = 1;
}
if (rme32->rcreg & RME32_RCR_ERF) {
return -1;
}
/* S/PDIF rate */
n = ((rme32->rcreg >> RME32_RCR_BITPOS_F0) & 1) +
(((rme32->rcreg >> RME32_RCR_BITPOS_F1) & 1) << 1) +
(((rme32->rcreg >> RME32_RCR_BITPOS_F2) & 1) << 2);
if (RME32_PRO_WITH_8414(rme32))
switch (n) { /* supporting the CS8414 */
case 0:
case 1:
case 2:
return -1;
case 3:
return 96000;
case 4:
return 88200;
case 5:
return 48000;
case 6:
return 44100;
case 7:
return 32000;
default:
return -1;
break;
}
else
switch (n) { /* supporting the CS8412 */
case 0:
return -1;
case 1:
return 48000;
case 2:
return 44100;
case 3:
return 32000;
case 4:
return 48000;
case 5:
return 44100;
case 6:
return 44056;
case 7:
return 32000;
default:
break;
}
return -1;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_playback_setrate(struct rme32 * rme32, int rate)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int ds;
ds = rme32->wcreg & RME32_WCR_DS_BM;
switch (rate) {
case 32000:
rme32->wcreg &= ~RME32_WCR_DS_BM;
rme32->wcreg = (rme32->wcreg | RME32_WCR_FREQ_0) &
~RME32_WCR_FREQ_1;
break;
case 44100:
rme32->wcreg &= ~RME32_WCR_DS_BM;
rme32->wcreg = (rme32->wcreg | RME32_WCR_FREQ_1) &
~RME32_WCR_FREQ_0;
break;
case 48000:
rme32->wcreg &= ~RME32_WCR_DS_BM;
rme32->wcreg = (rme32->wcreg | RME32_WCR_FREQ_0) |
RME32_WCR_FREQ_1;
break;
case 64000:
[PATCH] add PCI IDs so RME32 and RME96 drivers build While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15 05:19:17 +08:00
if (rme32->pci->device != PCI_DEVICE_ID_RME_DIGI32_PRO)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EINVAL;
rme32->wcreg |= RME32_WCR_DS_BM;
rme32->wcreg = (rme32->wcreg | RME32_WCR_FREQ_0) &
~RME32_WCR_FREQ_1;
break;
case 88200:
[PATCH] add PCI IDs so RME32 and RME96 drivers build While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15 05:19:17 +08:00
if (rme32->pci->device != PCI_DEVICE_ID_RME_DIGI32_PRO)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EINVAL;
rme32->wcreg |= RME32_WCR_DS_BM;
rme32->wcreg = (rme32->wcreg | RME32_WCR_FREQ_1) &
~RME32_WCR_FREQ_0;
break;
case 96000:
[PATCH] add PCI IDs so RME32 and RME96 drivers build While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15 05:19:17 +08:00
if (rme32->pci->device != PCI_DEVICE_ID_RME_DIGI32_PRO)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EINVAL;
rme32->wcreg |= RME32_WCR_DS_BM;
rme32->wcreg = (rme32->wcreg | RME32_WCR_FREQ_0) |
RME32_WCR_FREQ_1;
break;
default:
return -EINVAL;
}
if ((!ds && rme32->wcreg & RME32_WCR_DS_BM) ||
(ds && !(rme32->wcreg & RME32_WCR_DS_BM)))
{
/* change to/from double-speed: reset the DAC (if available) */
snd_rme32_reset_dac(rme32);
} else {
writel(rme32->wcreg, rme32->iobase + RME32_IO_CONTROL_REGISTER);
}
return 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_setclockmode(struct rme32 * rme32, int mode)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
switch (mode) {
case RME32_CLOCKMODE_SLAVE:
/* AutoSync */
rme32->wcreg = (rme32->wcreg & ~RME32_WCR_FREQ_0) &
~RME32_WCR_FREQ_1;
break;
case RME32_CLOCKMODE_MASTER_32:
/* Internal 32.0kHz */
rme32->wcreg = (rme32->wcreg | RME32_WCR_FREQ_0) &
~RME32_WCR_FREQ_1;
break;
case RME32_CLOCKMODE_MASTER_44:
/* Internal 44.1kHz */
rme32->wcreg = (rme32->wcreg & ~RME32_WCR_FREQ_0) |
RME32_WCR_FREQ_1;
break;
case RME32_CLOCKMODE_MASTER_48:
/* Internal 48.0kHz */
rme32->wcreg = (rme32->wcreg | RME32_WCR_FREQ_0) |
RME32_WCR_FREQ_1;
break;
default:
return -EINVAL;
}
writel(rme32->wcreg, rme32->iobase + RME32_IO_CONTROL_REGISTER);
return 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_getclockmode(struct rme32 * rme32)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
return ((rme32->wcreg >> RME32_WCR_BITPOS_FREQ_0) & 1) +
(((rme32->wcreg >> RME32_WCR_BITPOS_FREQ_1) & 1) << 1);
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_setinputtype(struct rme32 * rme32, int type)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
switch (type) {
case RME32_INPUT_OPTICAL:
rme32->wcreg = (rme32->wcreg & ~RME32_WCR_INP_0) &
~RME32_WCR_INP_1;
break;
case RME32_INPUT_COAXIAL:
rme32->wcreg = (rme32->wcreg | RME32_WCR_INP_0) &
~RME32_WCR_INP_1;
break;
case RME32_INPUT_INTERNAL:
rme32->wcreg = (rme32->wcreg & ~RME32_WCR_INP_0) |
RME32_WCR_INP_1;
break;
case RME32_INPUT_XLR:
rme32->wcreg = (rme32->wcreg | RME32_WCR_INP_0) |
RME32_WCR_INP_1;
break;
default:
return -EINVAL;
}
writel(rme32->wcreg, rme32->iobase + RME32_IO_CONTROL_REGISTER);
return 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_getinputtype(struct rme32 * rme32)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
return ((rme32->wcreg >> RME32_WCR_BITPOS_INP_0) & 1) +
(((rme32->wcreg >> RME32_WCR_BITPOS_INP_1) & 1) << 1);
}
static void
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_setframelog(struct rme32 * rme32, int n_channels, int is_playback)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int frlog;
if (n_channels == 2) {
frlog = 1;
} else {
/* assume 8 channels */
frlog = 3;
}
if (is_playback) {
frlog += (rme32->wcreg & RME32_WCR_MODE24) ? 2 : 1;
rme32->playback_frlog = frlog;
} else {
frlog += (rme32->wcreg & RME32_WCR_MODE24) ? 2 : 1;
rme32->capture_frlog = frlog;
}
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_setformat(struct rme32 * rme32, int format)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
switch (format) {
case SNDRV_PCM_FORMAT_S16_LE:
rme32->wcreg &= ~RME32_WCR_MODE24;
break;
case SNDRV_PCM_FORMAT_S32_LE:
rme32->wcreg |= RME32_WCR_MODE24;
break;
default:
return -EINVAL;
}
writel(rme32->wcreg, rme32->iobase + RME32_IO_CONTROL_REGISTER);
return 0;
}
static int
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_playback_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int err, rate, dummy;
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (rme32->fullduplex_mode) {
err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
if (err < 0)
return err;
} else {
[ALSA] sparse address space annotations ALSA Core,RawMidi Midlevel,ALSA<-OSS emulation,ALSA sequencer RME32 driver,RME96 driver,EMU10K1/EMU10K2 driver,NM256 driver Add sparse annotations where we do strange this with __iomem/__user pointers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-09-05 16:35:20 +08:00
runtime->dma_area = (void __force *)(rme32->iobase +
RME32_IO_DATA_BUFFER);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
runtime->dma_addr = rme32->port + RME32_IO_DATA_BUFFER;
runtime->dma_bytes = RME32_BUFFER_SIZE;
}
spin_lock_irq(&rme32->lock);
if ((rme32->rcreg & RME32_RCR_KMODE) &&
(rate = snd_rme32_capture_getrate(rme32, &dummy)) > 0) {
/* AutoSync */
if ((int)params_rate(params) != rate) {
spin_unlock_irq(&rme32->lock);
return -EIO;
}
} else if ((err = snd_rme32_playback_setrate(rme32, params_rate(params))) < 0) {
spin_unlock_irq(&rme32->lock);
return err;
}
if ((err = snd_rme32_setformat(rme32, params_format(params))) < 0) {
spin_unlock_irq(&rme32->lock);
return err;
}
snd_rme32_setframelog(rme32, params_channels(params), 1);
if (rme32->capture_periodsize != 0) {
if (params_period_size(params) << rme32->playback_frlog != rme32->capture_periodsize) {
spin_unlock_irq(&rme32->lock);
return -EBUSY;
}
}
rme32->playback_periodsize = params_period_size(params) << rme32->playback_frlog;
/* S/PDIF setup */
if ((rme32->wcreg & RME32_WCR_ADAT) == 0) {
rme32->wcreg &= ~(RME32_WCR_PRO | RME32_WCR_EMP);
rme32->wcreg |= rme32->wcreg_spdif_stream;
writel(rme32->wcreg, rme32->iobase + RME32_IO_CONTROL_REGISTER);
}
spin_unlock_irq(&rme32->lock);
return 0;
}
static int
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_capture_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int err, isadat, rate;
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (rme32->fullduplex_mode) {
err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
if (err < 0)
return err;
} else {
[ALSA] sparse address space annotations ALSA Core,RawMidi Midlevel,ALSA<-OSS emulation,ALSA sequencer RME32 driver,RME96 driver,EMU10K1/EMU10K2 driver,NM256 driver Add sparse annotations where we do strange this with __iomem/__user pointers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-09-05 16:35:20 +08:00
runtime->dma_area = (void __force *)rme32->iobase +
RME32_IO_DATA_BUFFER;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
runtime->dma_addr = rme32->port + RME32_IO_DATA_BUFFER;
runtime->dma_bytes = RME32_BUFFER_SIZE;
}
spin_lock_irq(&rme32->lock);
/* enable AutoSync for record-preparing */
rme32->wcreg |= RME32_WCR_AUTOSYNC;
writel(rme32->wcreg, rme32->iobase + RME32_IO_CONTROL_REGISTER);
if ((err = snd_rme32_setformat(rme32, params_format(params))) < 0) {
spin_unlock_irq(&rme32->lock);
return err;
}
if ((err = snd_rme32_playback_setrate(rme32, params_rate(params))) < 0) {
spin_unlock_irq(&rme32->lock);
return err;
}
if ((rate = snd_rme32_capture_getrate(rme32, &isadat)) > 0) {
if ((int)params_rate(params) != rate) {
spin_unlock_irq(&rme32->lock);
return -EIO;
}
if ((isadat && runtime->hw.channels_min == 2) ||
(!isadat && runtime->hw.channels_min == 8)) {
spin_unlock_irq(&rme32->lock);
return -EIO;
}
}
/* AutoSync off for recording */
rme32->wcreg &= ~RME32_WCR_AUTOSYNC;
writel(rme32->wcreg, rme32->iobase + RME32_IO_CONTROL_REGISTER);
snd_rme32_setframelog(rme32, params_channels(params), 0);
if (rme32->playback_periodsize != 0) {
if (params_period_size(params) << rme32->capture_frlog !=
rme32->playback_periodsize) {
spin_unlock_irq(&rme32->lock);
return -EBUSY;
}
}
rme32->capture_periodsize =
params_period_size(params) << rme32->capture_frlog;
spin_unlock_irq(&rme32->lock);
return 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_pcm_hw_free(struct snd_pcm_substream *substream)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (! rme32->fullduplex_mode)
return 0;
return snd_pcm_lib_free_pages(substream);
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static void snd_rme32_pcm_start(struct rme32 * rme32, int from_pause)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
if (!from_pause) {
writel(0, rme32->iobase + RME32_IO_RESET_POS);
}
rme32->wcreg |= RME32_WCR_START;
writel(rme32->wcreg, rme32->iobase + RME32_IO_CONTROL_REGISTER);
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static void snd_rme32_pcm_stop(struct rme32 * rme32, int to_pause)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
/*
* Check if there is an unconfirmed IRQ, if so confirm it, or else
* the hardware will not stop generating interrupts
*/
rme32->rcreg = readl(rme32->iobase + RME32_IO_CONTROL_REGISTER);
if (rme32->rcreg & RME32_RCR_IRQ) {
writel(0, rme32->iobase + RME32_IO_CONFIRM_ACTION_IRQ);
}
rme32->wcreg &= ~RME32_WCR_START;
if (rme32->wcreg & RME32_WCR_SEL)
rme32->wcreg |= RME32_WCR_MUTE;
writel(rme32->wcreg, rme32->iobase + RME32_IO_CONTROL_REGISTER);
if (! to_pause)
writel(0, rme32->iobase + RME32_IO_RESET_POS);
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t snd_rme32_interrupt(int irq, void *dev_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = (struct rme32 *) dev_id;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
rme32->rcreg = readl(rme32->iobase + RME32_IO_CONTROL_REGISTER);
if (!(rme32->rcreg & RME32_RCR_IRQ)) {
return IRQ_NONE;
} else {
if (rme32->capture_substream) {
snd_pcm_period_elapsed(rme32->capture_substream);
}
if (rme32->playback_substream) {
snd_pcm_period_elapsed(rme32->playback_substream);
}
writel(0, rme32->iobase + RME32_IO_CONFIRM_ACTION_IRQ);
}
return IRQ_HANDLED;
}
static unsigned int period_bytes[] = { RME32_BLOCK_SIZE };
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static struct snd_pcm_hw_constraint_list hw_constraints_period_bytes = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.count = ARRAY_SIZE(period_bytes),
.list = period_bytes,
.mask = 0
};
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static void snd_rme32_set_buffer_constraint(struct rme32 *rme32, struct snd_pcm_runtime *runtime)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
if (! rme32->fullduplex_mode) {
snd_pcm_hw_constraint_minmax(runtime,
SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
RME32_BUFFER_SIZE, RME32_BUFFER_SIZE);
snd_pcm_hw_constraint_list(runtime, 0,
SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
&hw_constraints_period_bytes);
}
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_playback_spdif_open(struct snd_pcm_substream *substream)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int rate, dummy;
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
snd_pcm_set_sync(substream);
spin_lock_irq(&rme32->lock);
if (rme32->playback_substream != NULL) {
spin_unlock_irq(&rme32->lock);
return -EBUSY;
}
rme32->wcreg &= ~RME32_WCR_ADAT;
writel(rme32->wcreg, rme32->iobase + RME32_IO_CONTROL_REGISTER);
rme32->playback_substream = substream;
spin_unlock_irq(&rme32->lock);
if (rme32->fullduplex_mode)
runtime->hw = snd_rme32_spdif_fd_info;
else
runtime->hw = snd_rme32_spdif_info;
[PATCH] add PCI IDs so RME32 and RME96 drivers build While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15 05:19:17 +08:00
if (rme32->pci->device == PCI_DEVICE_ID_RME_DIGI32_PRO) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
runtime->hw.rates |= SNDRV_PCM_RATE_64000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000;
runtime->hw.rate_max = 96000;
}
if ((rme32->rcreg & RME32_RCR_KMODE) &&
(rate = snd_rme32_capture_getrate(rme32, &dummy)) > 0) {
/* AutoSync */
[ALSA] pcm: add snd_pcm_rate_to_rate_bit() helper Add a snd_pcm_rate_to_rate_bit() function to factor out common code used by several drivers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-08-13 23:40:54 +08:00
runtime->hw.rates = snd_pcm_rate_to_rate_bit(rate);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
runtime->hw.rate_min = rate;
runtime->hw.rate_max = rate;
}
snd_rme32_set_buffer_constraint(rme32, runtime);
rme32->wcreg_spdif_stream = rme32->wcreg_spdif;
rme32->spdif_ctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_INACTIVE;
snd_ctl_notify(rme32->card, SNDRV_CTL_EVENT_MASK_VALUE |
SNDRV_CTL_EVENT_MASK_INFO, &rme32->spdif_ctl->id);
return 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_capture_spdif_open(struct snd_pcm_substream *substream)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int isadat, rate;
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
snd_pcm_set_sync(substream);
spin_lock_irq(&rme32->lock);
if (rme32->capture_substream != NULL) {
spin_unlock_irq(&rme32->lock);
return -EBUSY;
}
rme32->capture_substream = substream;
spin_unlock_irq(&rme32->lock);
if (rme32->fullduplex_mode)
runtime->hw = snd_rme32_spdif_fd_info;
else
runtime->hw = snd_rme32_spdif_info;
if (RME32_PRO_WITH_8414(rme32)) {
runtime->hw.rates |= SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000;
runtime->hw.rate_max = 96000;
}
if ((rate = snd_rme32_capture_getrate(rme32, &isadat)) > 0) {
if (isadat) {
return -EIO;
}
[ALSA] pcm: add snd_pcm_rate_to_rate_bit() helper Add a snd_pcm_rate_to_rate_bit() function to factor out common code used by several drivers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-08-13 23:40:54 +08:00
runtime->hw.rates = snd_pcm_rate_to_rate_bit(rate);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
runtime->hw.rate_min = rate;
runtime->hw.rate_max = rate;
}
snd_rme32_set_buffer_constraint(rme32, runtime);
return 0;
}
static int
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_playback_adat_open(struct snd_pcm_substream *substream)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int rate, dummy;
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
snd_pcm_set_sync(substream);
spin_lock_irq(&rme32->lock);
if (rme32->playback_substream != NULL) {
spin_unlock_irq(&rme32->lock);
return -EBUSY;
}
rme32->wcreg |= RME32_WCR_ADAT;
writel(rme32->wcreg, rme32->iobase + RME32_IO_CONTROL_REGISTER);
rme32->playback_substream = substream;
spin_unlock_irq(&rme32->lock);
if (rme32->fullduplex_mode)
runtime->hw = snd_rme32_adat_fd_info;
else
runtime->hw = snd_rme32_adat_info;
if ((rme32->rcreg & RME32_RCR_KMODE) &&
(rate = snd_rme32_capture_getrate(rme32, &dummy)) > 0) {
/* AutoSync */
[ALSA] pcm: add snd_pcm_rate_to_rate_bit() helper Add a snd_pcm_rate_to_rate_bit() function to factor out common code used by several drivers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-08-13 23:40:54 +08:00
runtime->hw.rates = snd_pcm_rate_to_rate_bit(rate);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
runtime->hw.rate_min = rate;
runtime->hw.rate_max = rate;
}
snd_rme32_set_buffer_constraint(rme32, runtime);
return 0;
}
static int
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_capture_adat_open(struct snd_pcm_substream *substream)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int isadat, rate;
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (rme32->fullduplex_mode)
runtime->hw = snd_rme32_adat_fd_info;
else
runtime->hw = snd_rme32_adat_info;
if ((rate = snd_rme32_capture_getrate(rme32, &isadat)) > 0) {
if (!isadat) {
return -EIO;
}
[ALSA] pcm: add snd_pcm_rate_to_rate_bit() helper Add a snd_pcm_rate_to_rate_bit() function to factor out common code used by several drivers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-08-13 23:40:54 +08:00
runtime->hw.rates = snd_pcm_rate_to_rate_bit(rate);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
runtime->hw.rate_min = rate;
runtime->hw.rate_max = rate;
}
snd_pcm_set_sync(substream);
spin_lock_irq(&rme32->lock);
if (rme32->capture_substream != NULL) {
spin_unlock_irq(&rme32->lock);
return -EBUSY;
}
rme32->capture_substream = substream;
spin_unlock_irq(&rme32->lock);
snd_rme32_set_buffer_constraint(rme32, runtime);
return 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_playback_close(struct snd_pcm_substream *substream)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int spdif = 0;
spin_lock_irq(&rme32->lock);
rme32->playback_substream = NULL;
rme32->playback_periodsize = 0;
spdif = (rme32->wcreg & RME32_WCR_ADAT) == 0;
spin_unlock_irq(&rme32->lock);
if (spdif) {
rme32->spdif_ctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_INACTIVE;
snd_ctl_notify(rme32->card, SNDRV_CTL_EVENT_MASK_VALUE |
SNDRV_CTL_EVENT_MASK_INFO,
&rme32->spdif_ctl->id);
}
return 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_capture_close(struct snd_pcm_substream *substream)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_lock_irq(&rme32->lock);
rme32->capture_substream = NULL;
rme32->capture_periodsize = 0;
ALSA: rme32.c irq enabling after spin_lock_irq According to the other code in this driver and similar code in rme96 it seems, that spin_lock_irq in snd_rme32_capture_close function should be paired with spin_unlock_irq. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov <yefremov.denis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-11 23:04:06 +08:00
spin_unlock_irq(&rme32->lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_playback_prepare(struct snd_pcm_substream *substream)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_lock_irq(&rme32->lock);
if (rme32->fullduplex_mode) {
memset(&rme32->playback_pcm, 0, sizeof(rme32->playback_pcm));
rme32->playback_pcm.hw_buffer_size = RME32_BUFFER_SIZE;
rme32->playback_pcm.sw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
} else {
writel(0, rme32->iobase + RME32_IO_RESET_POS);
}
if (rme32->wcreg & RME32_WCR_SEL)
rme32->wcreg &= ~RME32_WCR_MUTE;
writel(rme32->wcreg, rme32->iobase + RME32_IO_CONTROL_REGISTER);
spin_unlock_irq(&rme32->lock);
return 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_capture_prepare(struct snd_pcm_substream *substream)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_lock_irq(&rme32->lock);
if (rme32->fullduplex_mode) {
memset(&rme32->capture_pcm, 0, sizeof(rme32->capture_pcm));
rme32->capture_pcm.hw_buffer_size = RME32_BUFFER_SIZE;
rme32->capture_pcm.hw_queue_size = RME32_BUFFER_SIZE / 2;
rme32->capture_pcm.sw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
} else {
writel(0, rme32->iobase + RME32_IO_RESET_POS);
}
spin_unlock_irq(&rme32->lock);
return 0;
}
static int
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
struct snd_pcm_substream *s;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_lock(&rme32->lock);
[ALSA] Add snd_pcm_group_for_each_entry() for code cleanup Added a new macro snd_pcm_group_for_each_entry() just for code cleanup. Old macros, snd_pcm_group_for_each() and snd_pcm_group_substream_entry(), are removed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-22 19:52:53 +08:00
snd_pcm_group_for_each_entry(s, substream) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (s != rme32->playback_substream &&
s != rme32->capture_substream)
continue;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
rme32->running |= (1 << s->stream);
if (rme32->fullduplex_mode) {
/* remember the current DMA position */
if (s == rme32->playback_substream) {
rme32->playback_pcm.hw_io =
rme32->playback_pcm.hw_data = snd_rme32_pcm_byteptr(rme32);
} else {
rme32->capture_pcm.hw_io =
rme32->capture_pcm.hw_data = snd_rme32_pcm_byteptr(rme32);
}
}
break;
case SNDRV_PCM_TRIGGER_STOP:
rme32->running &= ~(1 << s->stream);
break;
}
snd_pcm_trigger_done(s, substream);
}
/* prefill playback buffer */
if (cmd == SNDRV_PCM_TRIGGER_START && rme32->fullduplex_mode) {
[ALSA] Add snd_pcm_group_for_each_entry() for code cleanup Added a new macro snd_pcm_group_for_each_entry() just for code cleanup. Old macros, snd_pcm_group_for_each() and snd_pcm_group_substream_entry(), are removed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-22 19:52:53 +08:00
snd_pcm_group_for_each_entry(s, substream) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (s == rme32->playback_substream) {
s->ops->ack(s);
break;
}
}
}
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
if (rme32->running && ! RME32_ISWORKING(rme32))
snd_rme32_pcm_start(rme32, 0);
break;
case SNDRV_PCM_TRIGGER_STOP:
if (! rme32->running && RME32_ISWORKING(rme32))
snd_rme32_pcm_stop(rme32, 0);
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
if (rme32->running && RME32_ISWORKING(rme32))
snd_rme32_pcm_stop(rme32, 1);
break;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
if (rme32->running && ! RME32_ISWORKING(rme32))
snd_rme32_pcm_start(rme32, 1);
break;
}
spin_unlock(&rme32->lock);
return 0;
}
/* pointer callback for halfduplex mode */
static snd_pcm_uframes_t
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_playback_pointer(struct snd_pcm_substream *substream)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return snd_rme32_pcm_byteptr(rme32) >> rme32->playback_frlog;
}
static snd_pcm_uframes_t
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_capture_pointer(struct snd_pcm_substream *substream)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return snd_rme32_pcm_byteptr(rme32) >> rme32->capture_frlog;
}
/* ack and pointer callbacks for fullduplex mode */
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static void snd_rme32_pb_trans_copy(struct snd_pcm_substream *substream,
struct snd_pcm_indirect *rec, size_t bytes)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
memcpy_toio(rme32->iobase + RME32_IO_DATA_BUFFER + rec->hw_data,
substream->runtime->dma_area + rec->sw_data, bytes);
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_playback_fd_ack(struct snd_pcm_substream *substream)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
struct snd_pcm_indirect *rec, *cprec;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
rec = &rme32->playback_pcm;
cprec = &rme32->capture_pcm;
spin_lock(&rme32->lock);
rec->hw_queue_size = RME32_BUFFER_SIZE;
if (rme32->running & (1 << SNDRV_PCM_STREAM_CAPTURE))
rec->hw_queue_size -= cprec->hw_ready;
spin_unlock(&rme32->lock);
snd_pcm_indirect_playback_transfer(substream, rec,
snd_rme32_pb_trans_copy);
return 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static void snd_rme32_cp_trans_copy(struct snd_pcm_substream *substream,
struct snd_pcm_indirect *rec, size_t bytes)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
memcpy_fromio(substream->runtime->dma_area + rec->sw_data,
rme32->iobase + RME32_IO_DATA_BUFFER + rec->hw_data,
bytes);
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_capture_fd_ack(struct snd_pcm_substream *substream)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
snd_pcm_indirect_capture_transfer(substream, &rme32->capture_pcm,
snd_rme32_cp_trans_copy);
return 0;
}
static snd_pcm_uframes_t
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_playback_fd_pointer(struct snd_pcm_substream *substream)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return snd_pcm_indirect_playback_pointer(substream, &rme32->playback_pcm,
snd_rme32_pcm_byteptr(rme32));
}
static snd_pcm_uframes_t
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_capture_fd_pointer(struct snd_pcm_substream *substream)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return snd_pcm_indirect_capture_pointer(substream, &rme32->capture_pcm,
snd_rme32_pcm_byteptr(rme32));
}
/* for halfduplex mode */
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static struct snd_pcm_ops snd_rme32_playback_spdif_ops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.open = snd_rme32_playback_spdif_open,
.close = snd_rme32_playback_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_rme32_playback_hw_params,
.hw_free = snd_rme32_pcm_hw_free,
.prepare = snd_rme32_playback_prepare,
.trigger = snd_rme32_pcm_trigger,
.pointer = snd_rme32_playback_pointer,
.copy = snd_rme32_playback_copy,
.silence = snd_rme32_playback_silence,
.mmap = snd_pcm_lib_mmap_iomem,
};
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static struct snd_pcm_ops snd_rme32_capture_spdif_ops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.open = snd_rme32_capture_spdif_open,
.close = snd_rme32_capture_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_rme32_capture_hw_params,
.hw_free = snd_rme32_pcm_hw_free,
.prepare = snd_rme32_capture_prepare,
.trigger = snd_rme32_pcm_trigger,
.pointer = snd_rme32_capture_pointer,
.copy = snd_rme32_capture_copy,
.mmap = snd_pcm_lib_mmap_iomem,
};
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static struct snd_pcm_ops snd_rme32_playback_adat_ops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.open = snd_rme32_playback_adat_open,
.close = snd_rme32_playback_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_rme32_playback_hw_params,
.prepare = snd_rme32_playback_prepare,
.trigger = snd_rme32_pcm_trigger,
.pointer = snd_rme32_playback_pointer,
.copy = snd_rme32_playback_copy,
.silence = snd_rme32_playback_silence,
.mmap = snd_pcm_lib_mmap_iomem,
};
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static struct snd_pcm_ops snd_rme32_capture_adat_ops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.open = snd_rme32_capture_adat_open,
.close = snd_rme32_capture_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_rme32_capture_hw_params,
.prepare = snd_rme32_capture_prepare,
.trigger = snd_rme32_pcm_trigger,
.pointer = snd_rme32_capture_pointer,
.copy = snd_rme32_capture_copy,
.mmap = snd_pcm_lib_mmap_iomem,
};
/* for fullduplex mode */
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static struct snd_pcm_ops snd_rme32_playback_spdif_fd_ops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.open = snd_rme32_playback_spdif_open,
.close = snd_rme32_playback_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_rme32_playback_hw_params,
.hw_free = snd_rme32_pcm_hw_free,
.prepare = snd_rme32_playback_prepare,
.trigger = snd_rme32_pcm_trigger,
.pointer = snd_rme32_playback_fd_pointer,
.ack = snd_rme32_playback_fd_ack,
};
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static struct snd_pcm_ops snd_rme32_capture_spdif_fd_ops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.open = snd_rme32_capture_spdif_open,
.close = snd_rme32_capture_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_rme32_capture_hw_params,
.hw_free = snd_rme32_pcm_hw_free,
.prepare = snd_rme32_capture_prepare,
.trigger = snd_rme32_pcm_trigger,
.pointer = snd_rme32_capture_fd_pointer,
.ack = snd_rme32_capture_fd_ack,
};
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static struct snd_pcm_ops snd_rme32_playback_adat_fd_ops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.open = snd_rme32_playback_adat_open,
.close = snd_rme32_playback_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_rme32_playback_hw_params,
.prepare = snd_rme32_playback_prepare,
.trigger = snd_rme32_pcm_trigger,
.pointer = snd_rme32_playback_fd_pointer,
.ack = snd_rme32_playback_fd_ack,
};
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static struct snd_pcm_ops snd_rme32_capture_adat_fd_ops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.open = snd_rme32_capture_adat_open,
.close = snd_rme32_capture_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_rme32_capture_hw_params,
.prepare = snd_rme32_capture_prepare,
.trigger = snd_rme32_pcm_trigger,
.pointer = snd_rme32_capture_fd_pointer,
.ack = snd_rme32_capture_fd_ack,
};
static void snd_rme32_free(void *private_data)
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = (struct rme32 *) private_data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (rme32 == NULL) {
return;
}
if (rme32->irq >= 0) {
snd_rme32_pcm_stop(rme32, 0);
free_irq(rme32->irq, (void *) rme32);
rme32->irq = -1;
}
if (rme32->iobase) {
iounmap(rme32->iobase);
rme32->iobase = NULL;
}
if (rme32->port) {
pci_release_regions(rme32->pci);
rme32->port = 0;
}
pci_disable_device(rme32->pci);
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static void snd_rme32_free_spdif_pcm(struct snd_pcm *pcm)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = (struct rme32 *) pcm->private_data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
rme32->spdif_pcm = NULL;
}
static void
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_free_adat_pcm(struct snd_pcm *pcm)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = (struct rme32 *) pcm->private_data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
rme32->adat_pcm = NULL;
}
ALSA: pci: remove __dev* attributes CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-07 01:35:10 +08:00
static int snd_rme32_create(struct rme32 *rme32)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct pci_dev *pci = rme32->pci;
int err;
rme32->irq = -1;
spin_lock_init(&rme32->lock);
if ((err = pci_enable_device(pci)) < 0)
return err;
if ((err = pci_request_regions(pci, "RME32")) < 0)
return err;
rme32->port = pci_resource_start(rme32->pci, 0);
[ALSA] sound: rme32.c fix integer as NULL pointer warning kernel style does assignment outside of if() statements. sound/pci/rme32.c:1353:71: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-02-28 18:57:23 +08:00
rme32->iobase = ioremap_nocache(rme32->port, RME32_IO_SIZE);
if (!rme32->iobase) {
[ALSA] Add missing KERN_* suffix to printk Add missing KERN_* suffix to printk. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-10-21 00:26:44 +08:00
snd_printk(KERN_ERR "unable to remap memory region 0x%lx-0x%lx\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
rme32->port, rme32->port + RME32_IO_SIZE - 1);
return -ENOMEM;
}
[ALSA] Remove IRQF_DISABLED for shared PCI irqs Fix IRQ flags for PCI devices. The shared IRQs for PCI devices shouldn't be allocated with IRQF_DISABLED. Also, when MSI is enabled, IRQF_SHARED shouldn't be used. The patch removes unnecessary cast in request_irq and free_irq, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-11-21 19:14:23 +08:00
if (request_irq(pci->irq, snd_rme32_interrupt, IRQF_SHARED,
ALSA: use KBUILD_MODNAME for request_irq argument in sound/pci/* The name argument of request_irq() appears in /proc/interrupts, and it's quite ugly when the name entry contains a space or special letters. In general, it's simpler and more readable when the module name appears there, so let's replace all entries with KBUILD_MODNAME. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10 22:36:37 +08:00
KBUILD_MODNAME, rme32)) {
[ALSA] Fix races in irq handler and ioremap Call ioremap before request_irq for avoiding possible races in the irq handler. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-06 21:44:34 +08:00
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
return -EBUSY;
}
rme32->irq = pci->irq;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* read the card's revision number */
pci_read_config_byte(pci, 8, &rme32->rev);
/* set up ALSA pcm device for S/PDIF */
if ((err = snd_pcm_new(rme32->card, "Digi32 IEC958", 0, 1, 1, &rme32->spdif_pcm)) < 0) {
return err;
}
rme32->spdif_pcm->private_data = rme32;
rme32->spdif_pcm->private_free = snd_rme32_free_spdif_pcm;
strcpy(rme32->spdif_pcm->name, "Digi32 IEC958");
if (rme32->fullduplex_mode) {
snd_pcm_set_ops(rme32->spdif_pcm, SNDRV_PCM_STREAM_PLAYBACK,
&snd_rme32_playback_spdif_fd_ops);
snd_pcm_set_ops(rme32->spdif_pcm, SNDRV_PCM_STREAM_CAPTURE,
&snd_rme32_capture_spdif_fd_ops);
snd_pcm_lib_preallocate_pages_for_all(rme32->spdif_pcm, SNDRV_DMA_TYPE_CONTINUOUS,
snd_dma_continuous_data(GFP_KERNEL),
0, RME32_MID_BUFFER_SIZE);
rme32->spdif_pcm->info_flags = SNDRV_PCM_INFO_JOINT_DUPLEX;
} else {
snd_pcm_set_ops(rme32->spdif_pcm, SNDRV_PCM_STREAM_PLAYBACK,
&snd_rme32_playback_spdif_ops);
snd_pcm_set_ops(rme32->spdif_pcm, SNDRV_PCM_STREAM_CAPTURE,
&snd_rme32_capture_spdif_ops);
rme32->spdif_pcm->info_flags = SNDRV_PCM_INFO_HALF_DUPLEX;
}
/* set up ALSA pcm device for ADAT */
[PATCH] add PCI IDs so RME32 and RME96 drivers build While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15 05:19:17 +08:00
if ((pci->device == PCI_DEVICE_ID_RME_DIGI32) ||
(pci->device == PCI_DEVICE_ID_RME_DIGI32_PRO)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* ADAT is not available on DIGI32 and DIGI32 Pro */
rme32->adat_pcm = NULL;
}
else {
if ((err = snd_pcm_new(rme32->card, "Digi32 ADAT", 1,
1, 1, &rme32->adat_pcm)) < 0)
{
return err;
}
rme32->adat_pcm->private_data = rme32;
rme32->adat_pcm->private_free = snd_rme32_free_adat_pcm;
strcpy(rme32->adat_pcm->name, "Digi32 ADAT");
if (rme32->fullduplex_mode) {
snd_pcm_set_ops(rme32->adat_pcm, SNDRV_PCM_STREAM_PLAYBACK,
&snd_rme32_playback_adat_fd_ops);
snd_pcm_set_ops(rme32->adat_pcm, SNDRV_PCM_STREAM_CAPTURE,
&snd_rme32_capture_adat_fd_ops);
snd_pcm_lib_preallocate_pages_for_all(rme32->adat_pcm, SNDRV_DMA_TYPE_CONTINUOUS,
snd_dma_continuous_data(GFP_KERNEL),
0, RME32_MID_BUFFER_SIZE);
rme32->adat_pcm->info_flags = SNDRV_PCM_INFO_JOINT_DUPLEX;
} else {
snd_pcm_set_ops(rme32->adat_pcm, SNDRV_PCM_STREAM_PLAYBACK,
&snd_rme32_playback_adat_ops);
snd_pcm_set_ops(rme32->adat_pcm, SNDRV_PCM_STREAM_CAPTURE,
&snd_rme32_capture_adat_ops);
rme32->adat_pcm->info_flags = SNDRV_PCM_INFO_HALF_DUPLEX;
}
}
rme32->playback_periodsize = 0;
rme32->capture_periodsize = 0;
/* make sure playback/capture is stopped, if by some reason active */
snd_rme32_pcm_stop(rme32, 0);
/* reset DAC */
snd_rme32_reset_dac(rme32);
/* reset buffer pointer */
writel(0, rme32->iobase + RME32_IO_RESET_POS);
/* set default values in registers */
rme32->wcreg = RME32_WCR_SEL | /* normal playback */
RME32_WCR_INP_0 | /* input select */
RME32_WCR_MUTE; /* muting on */
writel(rme32->wcreg, rme32->iobase + RME32_IO_CONTROL_REGISTER);
/* init switch interface */
if ((err = snd_rme32_create_switches(rme32->card, rme32)) < 0) {
return err;
}
/* init proc interface */
snd_rme32_proc_init(rme32);
rme32->capture_substream = NULL;
rme32->playback_substream = NULL;
return 0;
}
/*
* proc interface
*/
static void
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_proc_read(struct snd_info_entry * entry, struct snd_info_buffer *buffer)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int n;
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = (struct rme32 *) entry->private_data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
rme32->rcreg = readl(rme32->iobase + RME32_IO_CONTROL_REGISTER);
snd_iprintf(buffer, rme32->card->longname);
snd_iprintf(buffer, " (index #%d)\n", rme32->card->number + 1);
snd_iprintf(buffer, "\nGeneral settings\n");
if (rme32->fullduplex_mode)
snd_iprintf(buffer, " Full-duplex mode\n");
else
snd_iprintf(buffer, " Half-duplex mode\n");
if (RME32_PRO_WITH_8414(rme32)) {
snd_iprintf(buffer, " receiver: CS8414\n");
} else {
snd_iprintf(buffer, " receiver: CS8412\n");
}
if (rme32->wcreg & RME32_WCR_MODE24) {
snd_iprintf(buffer, " format: 24 bit");
} else {
snd_iprintf(buffer, " format: 16 bit");
}
if (rme32->wcreg & RME32_WCR_MONO) {
snd_iprintf(buffer, ", Mono\n");
} else {
snd_iprintf(buffer, ", Stereo\n");
}
snd_iprintf(buffer, "\nInput settings\n");
switch (snd_rme32_getinputtype(rme32)) {
case RME32_INPUT_OPTICAL:
snd_iprintf(buffer, " input: optical");
break;
case RME32_INPUT_COAXIAL:
snd_iprintf(buffer, " input: coaxial");
break;
case RME32_INPUT_INTERNAL:
snd_iprintf(buffer, " input: internal");
break;
case RME32_INPUT_XLR:
snd_iprintf(buffer, " input: XLR");
break;
}
if (snd_rme32_capture_getrate(rme32, &n) < 0) {
snd_iprintf(buffer, "\n sample rate: no valid signal\n");
} else {
if (n) {
snd_iprintf(buffer, " (8 channels)\n");
} else {
snd_iprintf(buffer, " (2 channels)\n");
}
snd_iprintf(buffer, " sample rate: %d Hz\n",
snd_rme32_capture_getrate(rme32, &n));
}
snd_iprintf(buffer, "\nOutput settings\n");
if (rme32->wcreg & RME32_WCR_SEL) {
snd_iprintf(buffer, " output signal: normal playback");
} else {
snd_iprintf(buffer, " output signal: same as input");
}
if (rme32->wcreg & RME32_WCR_MUTE) {
snd_iprintf(buffer, " (muted)\n");
} else {
snd_iprintf(buffer, "\n");
}
/* master output frequency */
if (!
((!(rme32->wcreg & RME32_WCR_FREQ_0))
&& (!(rme32->wcreg & RME32_WCR_FREQ_1)))) {
snd_iprintf(buffer, " sample rate: %d Hz\n",
snd_rme32_playback_getrate(rme32));
}
if (rme32->rcreg & RME32_RCR_KMODE) {
snd_iprintf(buffer, " sample clock source: AutoSync\n");
} else {
snd_iprintf(buffer, " sample clock source: Internal\n");
}
if (rme32->wcreg & RME32_WCR_PRO) {
snd_iprintf(buffer, " format: AES/EBU (professional)\n");
} else {
snd_iprintf(buffer, " format: IEC958 (consumer)\n");
}
if (rme32->wcreg & RME32_WCR_EMP) {
snd_iprintf(buffer, " emphasis: on\n");
} else {
snd_iprintf(buffer, " emphasis: off\n");
}
}
ALSA: pci: remove __dev* attributes CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-07 01:35:10 +08:00
static void snd_rme32_proc_init(struct rme32 *rme32)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct snd_info_entry *entry;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (! snd_card_proc_new(rme32->card, "rme32", &entry))
[ALSA] Remove unneeded read/write_size fields in proc text ops Remove unneeded read/write_size fields in proc text ops. snd_info_set_text_ops() is fixed, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-28 21:13:41 +08:00
snd_info_set_text_ops(entry, rme32, snd_rme32_proc_read);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* control interface
*/
[ALSA] Clean up with common snd_ctl_boolean_*_info callbacks Clean up codes using the new common snd_ctl_boolean_*_info() callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-23 21:42:26 +08:00
#define snd_rme32_info_loopback_control snd_ctl_boolean_mono_info
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_get_loopback_control(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_kcontrol_chip(kcontrol);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_lock_irq(&rme32->lock);
ucontrol->value.integer.value[0] =
rme32->wcreg & RME32_WCR_SEL ? 0 : 1;
spin_unlock_irq(&rme32->lock);
return 0;
}
static int
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_put_loopback_control(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_kcontrol_chip(kcontrol);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned int val;
int change;
val = ucontrol->value.integer.value[0] ? 0 : RME32_WCR_SEL;
spin_lock_irq(&rme32->lock);
val = (rme32->wcreg & ~RME32_WCR_SEL) | val;
change = val != rme32->wcreg;
if (ucontrol->value.integer.value[0])
val &= ~RME32_WCR_MUTE;
else
val |= RME32_WCR_MUTE;
rme32->wcreg = val;
writel(val, rme32->iobase + RME32_IO_CONTROL_REGISTER);
spin_unlock_irq(&rme32->lock);
return change;
}
static int
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_info_inputtype_control(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_kcontrol_chip(kcontrol);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static char *texts[4] = { "Optical", "Coaxial", "Internal", "XLR" };
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
uinfo->count = 1;
switch (rme32->pci->device) {
[PATCH] add PCI IDs so RME32 and RME96 drivers build While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15 05:19:17 +08:00
case PCI_DEVICE_ID_RME_DIGI32:
case PCI_DEVICE_ID_RME_DIGI32_8:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
uinfo->value.enumerated.items = 3;
break;
[PATCH] add PCI IDs so RME32 and RME96 drivers build While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15 05:19:17 +08:00
case PCI_DEVICE_ID_RME_DIGI32_PRO:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
uinfo->value.enumerated.items = 4;
break;
default:
snd_BUG();
break;
}
if (uinfo->value.enumerated.item >
uinfo->value.enumerated.items - 1) {
uinfo->value.enumerated.item =
uinfo->value.enumerated.items - 1;
}
strcpy(uinfo->value.enumerated.name,
texts[uinfo->value.enumerated.item]);
return 0;
}
static int
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_get_inputtype_control(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_kcontrol_chip(kcontrol);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned int items = 3;
spin_lock_irq(&rme32->lock);
ucontrol->value.enumerated.item[0] = snd_rme32_getinputtype(rme32);
switch (rme32->pci->device) {
[PATCH] add PCI IDs so RME32 and RME96 drivers build While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15 05:19:17 +08:00
case PCI_DEVICE_ID_RME_DIGI32:
case PCI_DEVICE_ID_RME_DIGI32_8:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
items = 3;
break;
[PATCH] add PCI IDs so RME32 and RME96 drivers build While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15 05:19:17 +08:00
case PCI_DEVICE_ID_RME_DIGI32_PRO:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
items = 4;
break;
default:
snd_BUG();
break;
}
if (ucontrol->value.enumerated.item[0] >= items) {
ucontrol->value.enumerated.item[0] = items - 1;
}
spin_unlock_irq(&rme32->lock);
return 0;
}
static int
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_put_inputtype_control(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_kcontrol_chip(kcontrol);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned int val;
int change, items = 3;
switch (rme32->pci->device) {
[PATCH] add PCI IDs so RME32 and RME96 drivers build While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15 05:19:17 +08:00
case PCI_DEVICE_ID_RME_DIGI32:
case PCI_DEVICE_ID_RME_DIGI32_8:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
items = 3;
break;
[PATCH] add PCI IDs so RME32 and RME96 drivers build While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15 05:19:17 +08:00
case PCI_DEVICE_ID_RME_DIGI32_PRO:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
items = 4;
break;
default:
snd_BUG();
break;
}
val = ucontrol->value.enumerated.item[0] % items;
spin_lock_irq(&rme32->lock);
change = val != (unsigned int)snd_rme32_getinputtype(rme32);
snd_rme32_setinputtype(rme32, val);
spin_unlock_irq(&rme32->lock);
return change;
}
static int
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_info_clockmode_control(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
static char *texts[4] = { "AutoSync",
"Internal 32.0kHz",
"Internal 44.1kHz",
"Internal 48.0kHz" };
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
uinfo->count = 1;
uinfo->value.enumerated.items = 4;
if (uinfo->value.enumerated.item > 3) {
uinfo->value.enumerated.item = 3;
}
strcpy(uinfo->value.enumerated.name,
texts[uinfo->value.enumerated.item]);
return 0;
}
static int
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_get_clockmode_control(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_kcontrol_chip(kcontrol);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_lock_irq(&rme32->lock);
ucontrol->value.enumerated.item[0] = snd_rme32_getclockmode(rme32);
spin_unlock_irq(&rme32->lock);
return 0;
}
static int
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
snd_rme32_put_clockmode_control(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_kcontrol_chip(kcontrol);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned int val;
int change;
val = ucontrol->value.enumerated.item[0] % 3;
spin_lock_irq(&rme32->lock);
change = val != (unsigned int)snd_rme32_getclockmode(rme32);
snd_rme32_setclockmode(rme32, val);
spin_unlock_irq(&rme32->lock);
return change;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static u32 snd_rme32_convert_from_aes(struct snd_aes_iec958 * aes)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
u32 val = 0;
val |= (aes->status[0] & IEC958_AES0_PROFESSIONAL) ? RME32_WCR_PRO : 0;
if (val & RME32_WCR_PRO)
val |= (aes->status[0] & IEC958_AES0_PRO_EMPHASIS_5015) ? RME32_WCR_EMP : 0;
else
val |= (aes->status[0] & IEC958_AES0_CON_EMPHASIS_5015) ? RME32_WCR_EMP : 0;
return val;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static void snd_rme32_convert_to_aes(struct snd_aes_iec958 * aes, u32 val)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
aes->status[0] = ((val & RME32_WCR_PRO) ? IEC958_AES0_PROFESSIONAL : 0);
if (val & RME32_WCR_PRO)
aes->status[0] |= (val & RME32_WCR_EMP) ? IEC958_AES0_PRO_EMPHASIS_5015 : 0;
else
aes->status[0] |= (val & RME32_WCR_EMP) ? IEC958_AES0_CON_EMPHASIS_5015 : 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_control_spdif_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
uinfo->count = 1;
return 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_control_spdif_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_kcontrol_chip(kcontrol);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
snd_rme32_convert_to_aes(&ucontrol->value.iec958,
rme32->wcreg_spdif);
return 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_control_spdif_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_kcontrol_chip(kcontrol);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int change;
u32 val;
val = snd_rme32_convert_from_aes(&ucontrol->value.iec958);
spin_lock_irq(&rme32->lock);
change = val != rme32->wcreg_spdif;
rme32->wcreg_spdif = val;
spin_unlock_irq(&rme32->lock);
return change;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_control_spdif_stream_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
uinfo->count = 1;
return 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_control_spdif_stream_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ucontrol)
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_kcontrol_chip(kcontrol);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
snd_rme32_convert_to_aes(&ucontrol->value.iec958,
rme32->wcreg_spdif_stream);
return 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_control_spdif_stream_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ucontrol)
{
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32 = snd_kcontrol_chip(kcontrol);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int change;
u32 val;
val = snd_rme32_convert_from_aes(&ucontrol->value.iec958);
spin_lock_irq(&rme32->lock);
change = val != rme32->wcreg_spdif_stream;
rme32->wcreg_spdif_stream = val;
rme32->wcreg &= ~(RME32_WCR_PRO | RME32_WCR_EMP);
rme32->wcreg |= val;
writel(rme32->wcreg, rme32->iobase + RME32_IO_CONTROL_REGISTER);
spin_unlock_irq(&rme32->lock);
return change;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_control_spdif_mask_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
uinfo->count = 1;
return 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_control_spdif_mask_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ucontrol)
{
ucontrol->value.iec958.status[0] = kcontrol->private_value;
return 0;
}
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static struct snd_kcontrol_new snd_rme32_controls[] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
.info = snd_rme32_control_spdif_info,
.get = snd_rme32_control_spdif_get,
.put = snd_rme32_control_spdif_put
},
{
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_INACTIVE,
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PCM_STREAM),
.info = snd_rme32_control_spdif_stream_info,
.get = snd_rme32_control_spdif_stream_get,
.put = snd_rme32_control_spdif_stream_put
},
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
[ALSA] sound - fix .iface field of mixer control elements Documentation,CS46xx driver,EMU10K1/EMU10K2 driver,AD1848 driver SB16/AWE driver,CMIPCI driver,ENS1370/1+ driver,RME32 driver RME96 driver,ICE1712 driver,ICE1724 driver,KORG1212 driver RME HDSP driver,RME9652 driver This patch changes .iface to SNDRV_CTL_ELEM_IFACE_MIXER whre _PCM or _HWDEP was used in controls that are not associated with a specific PCM (sub)stream or hwdep device, and changes some controls that got inconsitent .iface values due to copy+paste errors. Furthermore, it makes sure that all control that do use _PCM or _HWDEP use the correct number in the .device field. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-07-29 21:32:58 +08:00
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, CON_MASK),
.info = snd_rme32_control_spdif_mask_info,
.get = snd_rme32_control_spdif_mask_get,
.private_value = IEC958_AES0_PROFESSIONAL | IEC958_AES0_CON_EMPHASIS
},
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
[ALSA] sound - fix .iface field of mixer control elements Documentation,CS46xx driver,EMU10K1/EMU10K2 driver,AD1848 driver SB16/AWE driver,CMIPCI driver,ENS1370/1+ driver,RME32 driver RME96 driver,ICE1712 driver,ICE1724 driver,KORG1212 driver RME HDSP driver,RME9652 driver This patch changes .iface to SNDRV_CTL_ELEM_IFACE_MIXER whre _PCM or _HWDEP was used in controls that are not associated with a specific PCM (sub)stream or hwdep device, and changes some controls that got inconsitent .iface values due to copy+paste errors. Furthermore, it makes sure that all control that do use _PCM or _HWDEP use the correct number in the .device field. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-07-29 21:32:58 +08:00
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PRO_MASK),
.info = snd_rme32_control_spdif_mask_info,
.get = snd_rme32_control_spdif_mask_get,
.private_value = IEC958_AES0_PROFESSIONAL | IEC958_AES0_PRO_EMPHASIS
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Input Connector",
.info = snd_rme32_info_inputtype_control,
.get = snd_rme32_get_inputtype_control,
.put = snd_rme32_put_inputtype_control
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Loopback Input",
.info = snd_rme32_info_loopback_control,
.get = snd_rme32_get_loopback_control,
.put = snd_rme32_put_loopback_control
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Sample Clock Source",
.info = snd_rme32_info_clockmode_control,
.get = snd_rme32_get_clockmode_control,
.put = snd_rme32_put_clockmode_control
}
};
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static int snd_rme32_create_switches(struct snd_card *card, struct rme32 * rme32)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int idx, err;
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct snd_kcontrol *kctl;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
for (idx = 0; idx < (int)ARRAY_SIZE(snd_rme32_controls); idx++) {
if ((err = snd_ctl_add(card, kctl = snd_ctl_new1(&snd_rme32_controls[idx], rme32))) < 0)
return err;
if (idx == 1) /* IEC958 (S/PDIF) Stream */
rme32->spdif_ctl = kctl;
}
return 0;
}
/*
* Card initialisation
*/
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
static void snd_rme32_card_free(struct snd_card *card)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
snd_rme32_free(card->private_data);
}
ALSA: pci: remove __dev* attributes CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-07 01:35:10 +08:00
static int
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
snd_rme32_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
{
static int dev;
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
struct rme32 *rme32;
struct snd_card *card;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int err;
if (dev >= SNDRV_CARDS) {
return -ENODEV;
}
if (!enable[dev]) {
dev++;
return -ENOENT;
}
ALSA: Convert to snd_card_create() in sound/pci/* Convert from snd_card_new() to the new snd_card_create() function in sound/pci/*. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-28 23:44:30 +08:00
err = snd_card_create(index[dev], id[dev], THIS_MODULE,
sizeof(struct rme32), &card);
if (err < 0)
return err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
card->private_free = snd_rme32_card_free;
[ALSA] Remove xxx_t typedefs: PCI RME32 Modules: RME32 driver Remove xxx_t typedefs from the PCI RME32 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 22:05:25 +08:00
rme32 = (struct rme32 *) card->private_data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
rme32->card = card;
rme32->pci = pci;
snd_card_set_dev(card, &pci->dev);
if (fullduplex[dev])
rme32->fullduplex_mode = 1;
if ((err = snd_rme32_create(rme32)) < 0) {
snd_card_free(card);
return err;
}
strcpy(card->driver, "Digi32");
switch (rme32->pci->device) {
[PATCH] add PCI IDs so RME32 and RME96 drivers build While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15 05:19:17 +08:00
case PCI_DEVICE_ID_RME_DIGI32:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
strcpy(card->shortname, "RME Digi32");
break;
[PATCH] add PCI IDs so RME32 and RME96 drivers build While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15 05:19:17 +08:00
case PCI_DEVICE_ID_RME_DIGI32_8:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
strcpy(card->shortname, "RME Digi32/8");
break;
[PATCH] add PCI IDs so RME32 and RME96 drivers build While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15 05:19:17 +08:00
case PCI_DEVICE_ID_RME_DIGI32_PRO:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
strcpy(card->shortname, "RME Digi32 PRO");
break;
}
sprintf(card->longname, "%s (Rev. %d) at 0x%lx, irq %d",
card->shortname, rme32->rev, rme32->port, rme32->irq);
if ((err = snd_card_register(card)) < 0) {
snd_card_free(card);
return err;
}
pci_set_drvdata(pci, card);
dev++;
return 0;
}
ALSA: pci: remove __dev* attributes CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-07 01:35:10 +08:00
static void snd_rme32_remove(struct pci_dev *pci)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
snd_card_free(pci_get_drvdata(pci));
pci_set_drvdata(pci, NULL);
}
ALSA: pci: clean up using module_pci_driver() Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-24 18:25:00 +08:00
static struct pci_driver rme32_driver = {
ALSA: Use KBUILD_MODNAME for pci_driver.name entries The convention for pci_driver.name entry in kernel drivers seem to be the module name or equivalent ones. But, so far, almost all PCI sound drivers use more verbose name like "ABC Xyz (12)", and these are fairly confusing when appearing as a file name. This patch converts the all pci_driver.name entries in sound/pci/* to use KBUILD_MODNAME for more unified appearance. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10 22:20:20 +08:00
.name = KBUILD_MODNAME,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.id_table = snd_rme32_ids,
.probe = snd_rme32_probe,
ALSA: pci: remove __dev* attributes CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-07 01:35:10 +08:00
.remove = snd_rme32_remove,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
ALSA: pci: clean up using module_pci_driver() Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-24 18:25:00 +08:00
module_pci_driver(rme32_driver);