linux/arch/powerpc/kvm/book3s_xive.c

1972 lines
50 KiB
C
Raw Normal View History

/*
* Copyright 2017 Benjamin Herrenschmidt, IBM Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*/
#define pr_fmt(fmt) "xive-kvm: " fmt
#include <linux/kernel.h>
#include <linux/kvm_host.h>
#include <linux/err.h>
#include <linux/gfp.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/percpu.h>
#include <linux/cpumask.h>
#include <linux/uaccess.h>
#include <asm/kvm_book3s.h>
#include <asm/kvm_ppc.h>
#include <asm/hvcall.h>
#include <asm/xics.h>
#include <asm/xive.h>
#include <asm/xive-regs.h>
#include <asm/debug.h>
#include <asm/debugfs.h>
#include <asm/time.h>
#include <asm/opal.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include "book3s_xive.h"
/*
* Virtual mode variants of the hcalls for use on radix/radix
* with AIL. They require the VCPU's VP to be "pushed"
*
* We still instantiate them here because we use some of the
* generated utility functions as well in this file.
*/
#define XIVE_RUNTIME_CHECKS
#define X_PFX xive_vm_
#define X_STATIC static
#define X_STAT_PFX stat_vm_
#define __x_tima xive_tima
#define __x_eoi_page(xd) ((void __iomem *)((xd)->eoi_mmio))
#define __x_trig_page(xd) ((void __iomem *)((xd)->trig_mmio))
#define __x_writeb __raw_writeb
#define __x_readw __raw_readw
#define __x_readq __raw_readq
#define __x_writeq __raw_writeq
#include "book3s_xive_template.c"
/*
* We leave a gap of a couple of interrupts in the queue to
* account for the IPI and additional safety guard.
*/
#define XIVE_Q_GAP 2
/*
* This is a simple trigger for a generic XIVE IRQ. This must
* only be called for interrupts that support a trigger page
*/
static bool xive_irq_trigger(struct xive_irq_data *xd)
{
/* This should be only for MSIs */
if (WARN_ON(xd->flags & XIVE_IRQ_FLAG_LSI))
return false;
/* Those interrupts should always have a trigger page */
if (WARN_ON(!xd->trig_mmio))
return false;
out_be64(xd->trig_mmio, 0);
return true;
}
static irqreturn_t xive_esc_irq(int irq, void *data)
{
struct kvm_vcpu *vcpu = data;
vcpu->arch.irq_pending = 1;
smp_mb();
if (vcpu->arch.ceded)
kvmppc_fast_vcpu_kick(vcpu);
/* Since we have the no-EOI flag, the interrupt is effectively
* disabled now. Clearing xive_esc_on means we won't bother
* doing so on the next entry.
*
* This also allows the entry code to know that if a PQ combination
* of 10 is observed while xive_esc_on is true, it means the queue
* contains an unprocessed escalation interrupt. We don't make use of
* that knowledge today but might (see comment in book3s_hv_rmhandler.S)
*/
vcpu->arch.xive_esc_on = false;
return IRQ_HANDLED;
}
static int xive_attach_escalation(struct kvm_vcpu *vcpu, u8 prio)
{
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
struct xive_q *q = &xc->queues[prio];
char *name = NULL;
int rc;
/* Already there ? */
if (xc->esc_virq[prio])
return 0;
/* Hook up the escalation interrupt */
xc->esc_virq[prio] = irq_create_mapping(NULL, q->esc_irq);
if (!xc->esc_virq[prio]) {
pr_err("Failed to map escalation interrupt for queue %d of VCPU %d\n",
prio, xc->server_num);
return -EIO;
}
if (xc->xive->single_escalation)
name = kasprintf(GFP_KERNEL, "kvm-%d-%d",
vcpu->kvm->arch.lpid, xc->server_num);
else
name = kasprintf(GFP_KERNEL, "kvm-%d-%d-%d",
vcpu->kvm->arch.lpid, xc->server_num, prio);
if (!name) {
pr_err("Failed to allocate escalation irq name for queue %d of VCPU %d\n",
prio, xc->server_num);
rc = -ENOMEM;
goto error;
}
pr_devel("Escalation %s irq %d (prio %d)\n", name, xc->esc_virq[prio], prio);
rc = request_irq(xc->esc_virq[prio], xive_esc_irq,
IRQF_NO_THREAD, name, vcpu);
if (rc) {
pr_err("Failed to request escalation interrupt for queue %d of VCPU %d\n",
prio, xc->server_num);
goto error;
}
xc->esc_virq_names[prio] = name;
/* In single escalation mode, we grab the ESB MMIO of the
* interrupt and mask it. Also populate the VCPU v/raddr
* of the ESB page for use by asm entry/exit code. Finally
* set the XIVE_IRQ_NO_EOI flag which will prevent the
* core code from performing an EOI on the escalation
* interrupt, thus leaving it effectively masked after
* it fires once.
*/
if (xc->xive->single_escalation) {
struct irq_data *d = irq_get_irq_data(xc->esc_virq[prio]);
struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_01);
vcpu->arch.xive_esc_raddr = xd->eoi_page;
vcpu->arch.xive_esc_vaddr = (__force u64)xd->eoi_mmio;
xd->flags |= XIVE_IRQ_NO_EOI;
}
return 0;
error:
irq_dispose_mapping(xc->esc_virq[prio]);
xc->esc_virq[prio] = 0;
kfree(name);
return rc;
}
static int xive_provision_queue(struct kvm_vcpu *vcpu, u8 prio)
{
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
struct kvmppc_xive *xive = xc->xive;
struct xive_q *q = &xc->queues[prio];
void *qpage;
int rc;
if (WARN_ON(q->qpage))
return 0;
/* Allocate the queue and retrieve infos on current node for now */
qpage = (__be32 *)__get_free_pages(GFP_KERNEL, xive->q_page_order);
if (!qpage) {
pr_err("Failed to allocate queue %d for VCPU %d\n",
prio, xc->server_num);
return -ENOMEM;
}
memset(qpage, 0, 1 << xive->q_order);
/*
* Reconfigure the queue. This will set q->qpage only once the
* queue is fully configured. This is a requirement for prio 0
* as we will stop doing EOIs for every IPI as soon as we observe
* qpage being non-NULL, and instead will only EOI when we receive
* corresponding queue 0 entries
*/
rc = xive_native_configure_queue(xc->vp_id, q, prio, qpage,
xive->q_order, true);
if (rc)
pr_err("Failed to configure queue %d for VCPU %d\n",
prio, xc->server_num);
return rc;
}
/* Called with kvm_lock held */
static int xive_check_provisioning(struct kvm *kvm, u8 prio)
{
struct kvmppc_xive *xive = kvm->arch.xive;
struct kvm_vcpu *vcpu;
int i, rc;
lockdep_assert_held(&kvm->lock);
/* Already provisioned ? */
if (xive->qmap & (1 << prio))
return 0;
pr_devel("Provisioning prio... %d\n", prio);
/* Provision each VCPU and enable escalations if needed */
kvm_for_each_vcpu(i, vcpu, kvm) {
if (!vcpu->arch.xive_vcpu)
continue;
rc = xive_provision_queue(vcpu, prio);
if (rc == 0 && !xive->single_escalation)
xive_attach_escalation(vcpu, prio);
if (rc)
return rc;
}
/* Order previous stores and mark it as provisioned */
mb();
xive->qmap |= (1 << prio);
return 0;
}
static void xive_inc_q_pending(struct kvm *kvm, u32 server, u8 prio)
{
struct kvm_vcpu *vcpu;
struct kvmppc_xive_vcpu *xc;
struct xive_q *q;
/* Locate target server */
vcpu = kvmppc_xive_find_server(kvm, server);
if (!vcpu) {
pr_warn("%s: Can't find server %d\n", __func__, server);
return;
}
xc = vcpu->arch.xive_vcpu;
if (WARN_ON(!xc))
return;
q = &xc->queues[prio];
atomic_inc(&q->pending_count);
}
static int xive_try_pick_queue(struct kvm_vcpu *vcpu, u8 prio)
{
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
struct xive_q *q;
u32 max;
if (WARN_ON(!xc))
return -ENXIO;
if (!xc->valid)
return -ENXIO;
q = &xc->queues[prio];
if (WARN_ON(!q->qpage))
return -ENXIO;
/* Calculate max number of interrupts in that queue. */
max = (q->msk + 1) - XIVE_Q_GAP;
return atomic_add_unless(&q->count, 1, max) ? 0 : -EBUSY;
}
static int xive_select_target(struct kvm *kvm, u32 *server, u8 prio)
{
struct kvm_vcpu *vcpu;
int i, rc;
/* Locate target server */
vcpu = kvmppc_xive_find_server(kvm, *server);
if (!vcpu) {
pr_devel("Can't find server %d\n", *server);
return -EINVAL;
}
pr_devel("Finding irq target on 0x%x/%d...\n", *server, prio);
/* Try pick it */
rc = xive_try_pick_queue(vcpu, prio);
if (rc == 0)
return rc;
pr_devel(" .. failed, looking up candidate...\n");
/* Failed, pick another VCPU */
kvm_for_each_vcpu(i, vcpu, kvm) {
if (!vcpu->arch.xive_vcpu)
continue;
rc = xive_try_pick_queue(vcpu, prio);
if (rc == 0) {
*server = vcpu->arch.xive_vcpu->server_num;
pr_devel(" found on 0x%x/%d\n", *server, prio);
return rc;
}
}
pr_devel(" no available target !\n");
/* No available target ! */
return -EBUSY;
}
KVM: PPC: Book3S HV: Pack VCORE IDs to access full VCPU ID space It is not currently possible to create the full number of possible VCPUs (KVM_MAX_VCPUS) on Power9 with KVM-HV when the guest uses fewer threads per core than its core stride (or "VSMT mode"). This is because the VCORE ID and XIVE offsets grow beyond KVM_MAX_VCPUS even though the VCPU ID is less than KVM_MAX_VCPU_ID. To address this, "pack" the VCORE ID and XIVE offsets by using knowledge of the way the VCPU IDs will be used when there are fewer guest threads per core than the core stride. The primary thread of each core will always be used first. Then, if the guest uses more than one thread per core, these secondary threads will sequentially follow the primary in each core. So, the only way an ID above KVM_MAX_VCPUS can be seen, is if the VCPUs are being spaced apart, so at least half of each core is empty, and IDs between KVM_MAX_VCPUS and (KVM_MAX_VCPUS * 2) can be mapped into the second half of each core (4..7, in an 8-thread core). Similarly, if IDs above KVM_MAX_VCPUS * 2 are seen, at least 3/4 of each core is being left empty, and we can map down into the second and third quarters of each core (2, 3 and 5, 6 in an 8-thread core). Lastly, if IDs above KVM_MAX_VCPUS * 4 are seen, only the primary threads are being used and 7/8 of the core is empty, allowing use of the 1, 5, 3 and 7 thread slots. (Strides less than 8 are handled similarly.) This allows the VCORE ID or offset to be calculated quickly from the VCPU ID or XIVE server numbers, without access to the VCPU structure. [paulus@ozlabs.org - tidied up comment a little, changed some WARN_ONCE to pr_devel, wrapped line, fixed id check.] Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-07-25 14:12:02 +08:00
static u32 xive_vp(struct kvmppc_xive *xive, u32 server)
{
return xive->vp_base + kvmppc_pack_vcpu_id(xive->kvm, server);
}
static u8 xive_lock_and_mask(struct kvmppc_xive *xive,
struct kvmppc_xive_src_block *sb,
struct kvmppc_xive_irq_state *state)
{
struct xive_irq_data *xd;
u32 hw_num;
u8 old_prio;
u64 val;
/*
* Take the lock, set masked, try again if racing
* with H_EOI
*/
for (;;) {
arch_spin_lock(&sb->lock);
old_prio = state->guest_priority;
state->guest_priority = MASKED;
mb();
if (!state->in_eoi)
break;
state->guest_priority = old_prio;
arch_spin_unlock(&sb->lock);
}
/* No change ? Bail */
if (old_prio == MASKED)
return old_prio;
/* Get the right irq */
kvmppc_xive_select_irq(state, &hw_num, &xd);
/*
* If the interrupt is marked as needing masking via
* firmware, we do it here. Firmware masking however
* is "lossy", it won't return the old p and q bits
* and won't set the interrupt to a state where it will
* record queued ones. If this is an issue we should do
* lazy masking instead.
*
* For now, we work around this in unmask by forcing
* an interrupt whenever we unmask a non-LSI via FW
* (if ever).
*/
if (xd->flags & OPAL_XIVE_IRQ_MASK_VIA_FW) {
xive_native_configure_irq(hw_num,
KVM: PPC: Book3S HV: Pack VCORE IDs to access full VCPU ID space It is not currently possible to create the full number of possible VCPUs (KVM_MAX_VCPUS) on Power9 with KVM-HV when the guest uses fewer threads per core than its core stride (or "VSMT mode"). This is because the VCORE ID and XIVE offsets grow beyond KVM_MAX_VCPUS even though the VCPU ID is less than KVM_MAX_VCPU_ID. To address this, "pack" the VCORE ID and XIVE offsets by using knowledge of the way the VCPU IDs will be used when there are fewer guest threads per core than the core stride. The primary thread of each core will always be used first. Then, if the guest uses more than one thread per core, these secondary threads will sequentially follow the primary in each core. So, the only way an ID above KVM_MAX_VCPUS can be seen, is if the VCPUs are being spaced apart, so at least half of each core is empty, and IDs between KVM_MAX_VCPUS and (KVM_MAX_VCPUS * 2) can be mapped into the second half of each core (4..7, in an 8-thread core). Similarly, if IDs above KVM_MAX_VCPUS * 2 are seen, at least 3/4 of each core is being left empty, and we can map down into the second and third quarters of each core (2, 3 and 5, 6 in an 8-thread core). Lastly, if IDs above KVM_MAX_VCPUS * 4 are seen, only the primary threads are being used and 7/8 of the core is empty, allowing use of the 1, 5, 3 and 7 thread slots. (Strides less than 8 are handled similarly.) This allows the VCORE ID or offset to be calculated quickly from the VCPU ID or XIVE server numbers, without access to the VCPU structure. [paulus@ozlabs.org - tidied up comment a little, changed some WARN_ONCE to pr_devel, wrapped line, fixed id check.] Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-07-25 14:12:02 +08:00
xive_vp(xive, state->act_server),
MASKED, state->number);
/* set old_p so we can track if an H_EOI was done */
state->old_p = true;
state->old_q = false;
} else {
/* Set PQ to 10, return old P and old Q and remember them */
val = xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_10);
state->old_p = !!(val & 2);
state->old_q = !!(val & 1);
/*
* Synchronize hardware to sensure the queues are updated
* when masking
*/
xive_native_sync_source(hw_num);
}
return old_prio;
}
static void xive_lock_for_unmask(struct kvmppc_xive_src_block *sb,
struct kvmppc_xive_irq_state *state)
{
/*
* Take the lock try again if racing with H_EOI
*/
for (;;) {
arch_spin_lock(&sb->lock);
if (!state->in_eoi)
break;
arch_spin_unlock(&sb->lock);
}
}
static void xive_finish_unmask(struct kvmppc_xive *xive,
struct kvmppc_xive_src_block *sb,
struct kvmppc_xive_irq_state *state,
u8 prio)
{
struct xive_irq_data *xd;
u32 hw_num;
/* If we aren't changing a thing, move on */
if (state->guest_priority != MASKED)
goto bail;
/* Get the right irq */
kvmppc_xive_select_irq(state, &hw_num, &xd);
/*
* See command in xive_lock_and_mask() concerning masking
* via firmware.
*/
if (xd->flags & OPAL_XIVE_IRQ_MASK_VIA_FW) {
xive_native_configure_irq(hw_num,
KVM: PPC: Book3S HV: Pack VCORE IDs to access full VCPU ID space It is not currently possible to create the full number of possible VCPUs (KVM_MAX_VCPUS) on Power9 with KVM-HV when the guest uses fewer threads per core than its core stride (or "VSMT mode"). This is because the VCORE ID and XIVE offsets grow beyond KVM_MAX_VCPUS even though the VCPU ID is less than KVM_MAX_VCPU_ID. To address this, "pack" the VCORE ID and XIVE offsets by using knowledge of the way the VCPU IDs will be used when there are fewer guest threads per core than the core stride. The primary thread of each core will always be used first. Then, if the guest uses more than one thread per core, these secondary threads will sequentially follow the primary in each core. So, the only way an ID above KVM_MAX_VCPUS can be seen, is if the VCPUs are being spaced apart, so at least half of each core is empty, and IDs between KVM_MAX_VCPUS and (KVM_MAX_VCPUS * 2) can be mapped into the second half of each core (4..7, in an 8-thread core). Similarly, if IDs above KVM_MAX_VCPUS * 2 are seen, at least 3/4 of each core is being left empty, and we can map down into the second and third quarters of each core (2, 3 and 5, 6 in an 8-thread core). Lastly, if IDs above KVM_MAX_VCPUS * 4 are seen, only the primary threads are being used and 7/8 of the core is empty, allowing use of the 1, 5, 3 and 7 thread slots. (Strides less than 8 are handled similarly.) This allows the VCORE ID or offset to be calculated quickly from the VCPU ID or XIVE server numbers, without access to the VCPU structure. [paulus@ozlabs.org - tidied up comment a little, changed some WARN_ONCE to pr_devel, wrapped line, fixed id check.] Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-07-25 14:12:02 +08:00
xive_vp(xive, state->act_server),
state->act_priority, state->number);
/* If an EOI is needed, do it here */
if (!state->old_p)
xive_vm_source_eoi(hw_num, xd);
/* If this is not an LSI, force a trigger */
if (!(xd->flags & OPAL_XIVE_IRQ_LSI))
xive_irq_trigger(xd);
goto bail;
}
/* Old Q set, set PQ to 11 */
if (state->old_q)
xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_11);
/*
* If not old P, then perform an "effective" EOI,
* on the source. This will handle the cases where
* FW EOI is needed.
*/
if (!state->old_p)
xive_vm_source_eoi(hw_num, xd);
/* Synchronize ordering and mark unmasked */
mb();
bail:
state->guest_priority = prio;
}
/*
* Target an interrupt to a given server/prio, this will fallback
* to another server if necessary and perform the HW targetting
* updates as needed
*
* NOTE: Must be called with the state lock held
*/
static int xive_target_interrupt(struct kvm *kvm,
struct kvmppc_xive_irq_state *state,
u32 server, u8 prio)
{
struct kvmppc_xive *xive = kvm->arch.xive;
u32 hw_num;
int rc;
/*
* This will return a tentative server and actual
* priority. The count for that new target will have
* already been incremented.
*/
rc = xive_select_target(kvm, &server, prio);
/*
* We failed to find a target ? Not much we can do
* at least until we support the GIQ.
*/
if (rc)
return rc;
/*
* Increment the old queue pending count if there
* was one so that the old queue count gets adjusted later
* when observed to be empty.
*/
if (state->act_priority != MASKED)
xive_inc_q_pending(kvm,
state->act_server,
state->act_priority);
/*
* Update state and HW
*/
state->act_priority = prio;
state->act_server = server;
/* Get the right irq */
kvmppc_xive_select_irq(state, &hw_num, NULL);
return xive_native_configure_irq(hw_num,
KVM: PPC: Book3S HV: Pack VCORE IDs to access full VCPU ID space It is not currently possible to create the full number of possible VCPUs (KVM_MAX_VCPUS) on Power9 with KVM-HV when the guest uses fewer threads per core than its core stride (or "VSMT mode"). This is because the VCORE ID and XIVE offsets grow beyond KVM_MAX_VCPUS even though the VCPU ID is less than KVM_MAX_VCPU_ID. To address this, "pack" the VCORE ID and XIVE offsets by using knowledge of the way the VCPU IDs will be used when there are fewer guest threads per core than the core stride. The primary thread of each core will always be used first. Then, if the guest uses more than one thread per core, these secondary threads will sequentially follow the primary in each core. So, the only way an ID above KVM_MAX_VCPUS can be seen, is if the VCPUs are being spaced apart, so at least half of each core is empty, and IDs between KVM_MAX_VCPUS and (KVM_MAX_VCPUS * 2) can be mapped into the second half of each core (4..7, in an 8-thread core). Similarly, if IDs above KVM_MAX_VCPUS * 2 are seen, at least 3/4 of each core is being left empty, and we can map down into the second and third quarters of each core (2, 3 and 5, 6 in an 8-thread core). Lastly, if IDs above KVM_MAX_VCPUS * 4 are seen, only the primary threads are being used and 7/8 of the core is empty, allowing use of the 1, 5, 3 and 7 thread slots. (Strides less than 8 are handled similarly.) This allows the VCORE ID or offset to be calculated quickly from the VCPU ID or XIVE server numbers, without access to the VCPU structure. [paulus@ozlabs.org - tidied up comment a little, changed some WARN_ONCE to pr_devel, wrapped line, fixed id check.] Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-07-25 14:12:02 +08:00
xive_vp(xive, server),
prio, state->number);
}
/*
* Targetting rules: In order to avoid losing track of
* pending interrupts accross mask and unmask, which would
* allow queue overflows, we implement the following rules:
*
* - Unless it was never enabled (or we run out of capacity)
* an interrupt is always targetted at a valid server/queue
* pair even when "masked" by the guest. This pair tends to
* be the last one used but it can be changed under some
* circumstances. That allows us to separate targetting
* from masking, we only handle accounting during (re)targetting,
* this also allows us to let an interrupt drain into its target
* queue after masking, avoiding complex schemes to remove
* interrupts out of remote processor queues.
*
* - When masking, we set PQ to 10 and save the previous value
* of P and Q.
*
* - When unmasking, if saved Q was set, we set PQ to 11
* otherwise we leave PQ to the HW state which will be either
* 10 if nothing happened or 11 if the interrupt fired while
* masked. Effectively we are OR'ing the previous Q into the
* HW Q.
*
* Then if saved P is clear, we do an effective EOI (Q->P->Trigger)
* which will unmask the interrupt and shoot a new one if Q was
* set.
*
* Otherwise (saved P is set) we leave PQ unchanged (so 10 or 11,
* effectively meaning an H_EOI from the guest is still expected
* for that interrupt).
*
* - If H_EOI occurs while masked, we clear the saved P.
*
* - When changing target, we account on the new target and
* increment a separate "pending" counter on the old one.
* This pending counter will be used to decrement the old
* target's count when its queue has been observed empty.
*/
int kvmppc_xive_set_xive(struct kvm *kvm, u32 irq, u32 server,
u32 priority)
{
struct kvmppc_xive *xive = kvm->arch.xive;
struct kvmppc_xive_src_block *sb;
struct kvmppc_xive_irq_state *state;
u8 new_act_prio;
int rc = 0;
u16 idx;
if (!xive)
return -ENODEV;
pr_devel("set_xive ! irq 0x%x server 0x%x prio %d\n",
irq, server, priority);
/* First, check provisioning of queues */
if (priority != MASKED)
rc = xive_check_provisioning(xive->kvm,
xive_prio_from_guest(priority));
if (rc) {
pr_devel(" provisioning failure %d !\n", rc);
return rc;
}
sb = kvmppc_xive_find_source(xive, irq, &idx);
if (!sb)
return -EINVAL;
state = &sb->irq_state[idx];
/*
* We first handle masking/unmasking since the locking
* might need to be retried due to EOIs, we'll handle
* targetting changes later. These functions will return
* with the SB lock held.
*
* xive_lock_and_mask() will also set state->guest_priority
* but won't otherwise change other fields of the state.
*
* xive_lock_for_unmask will not actually unmask, this will
* be done later by xive_finish_unmask() once the targetting
* has been done, so we don't try to unmask an interrupt
* that hasn't yet been targetted.
*/
if (priority == MASKED)
xive_lock_and_mask(xive, sb, state);
else
xive_lock_for_unmask(sb, state);
/*
* Then we handle targetting.
*
* First calculate a new "actual priority"
*/
new_act_prio = state->act_priority;
if (priority != MASKED)
new_act_prio = xive_prio_from_guest(priority);
pr_devel(" new_act_prio=%x act_server=%x act_prio=%x\n",
new_act_prio, state->act_server, state->act_priority);
/*
* Then check if we actually need to change anything,
*
* The condition for re-targetting the interrupt is that
* we have a valid new priority (new_act_prio is not 0xff)
* and either the server or the priority changed.
*
* Note: If act_priority was ff and the new priority is
* also ff, we don't do anything and leave the interrupt
* untargetted. An attempt of doing an int_on on an
* untargetted interrupt will fail. If that is a problem
* we could initialize interrupts with valid default
*/
if (new_act_prio != MASKED &&
(state->act_server != server ||
state->act_priority != new_act_prio))
rc = xive_target_interrupt(kvm, state, server, new_act_prio);
/*
* Perform the final unmasking of the interrupt source
* if necessary
*/
if (priority != MASKED)
xive_finish_unmask(xive, sb, state, priority);
/*
* Finally Update saved_priority to match. Only int_on/off
* set this field to a different value.
*/
state->saved_priority = priority;
arch_spin_unlock(&sb->lock);
return rc;
}
int kvmppc_xive_get_xive(struct kvm *kvm, u32 irq, u32 *server,
u32 *priority)
{
struct kvmppc_xive *xive = kvm->arch.xive;
struct kvmppc_xive_src_block *sb;
struct kvmppc_xive_irq_state *state;
u16 idx;
if (!xive)
return -ENODEV;
sb = kvmppc_xive_find_source(xive, irq, &idx);
if (!sb)
return -EINVAL;
state = &sb->irq_state[idx];
arch_spin_lock(&sb->lock);
*server = state->act_server;
*priority = state->guest_priority;
arch_spin_unlock(&sb->lock);
return 0;
}
int kvmppc_xive_int_on(struct kvm *kvm, u32 irq)
{
struct kvmppc_xive *xive = kvm->arch.xive;
struct kvmppc_xive_src_block *sb;
struct kvmppc_xive_irq_state *state;
u16 idx;
if (!xive)
return -ENODEV;
sb = kvmppc_xive_find_source(xive, irq, &idx);
if (!sb)
return -EINVAL;
state = &sb->irq_state[idx];
pr_devel("int_on(irq=0x%x)\n", irq);
/*
* Check if interrupt was not targetted
*/
if (state->act_priority == MASKED) {
pr_devel("int_on on untargetted interrupt\n");
return -EINVAL;
}
/* If saved_priority is 0xff, do nothing */
if (state->saved_priority == MASKED)
return 0;
/*
* Lock and unmask it.
*/
xive_lock_for_unmask(sb, state);
xive_finish_unmask(xive, sb, state, state->saved_priority);
arch_spin_unlock(&sb->lock);
return 0;
}
int kvmppc_xive_int_off(struct kvm *kvm, u32 irq)
{
struct kvmppc_xive *xive = kvm->arch.xive;
struct kvmppc_xive_src_block *sb;
struct kvmppc_xive_irq_state *state;
u16 idx;
if (!xive)
return -ENODEV;
sb = kvmppc_xive_find_source(xive, irq, &idx);
if (!sb)
return -EINVAL;
state = &sb->irq_state[idx];
pr_devel("int_off(irq=0x%x)\n", irq);
/*
* Lock and mask
*/
state->saved_priority = xive_lock_and_mask(xive, sb, state);
arch_spin_unlock(&sb->lock);
return 0;
}
static bool xive_restore_pending_irq(struct kvmppc_xive *xive, u32 irq)
{
struct kvmppc_xive_src_block *sb;
struct kvmppc_xive_irq_state *state;
u16 idx;
sb = kvmppc_xive_find_source(xive, irq, &idx);
if (!sb)
return false;
state = &sb->irq_state[idx];
if (!state->valid)
return false;
/*
* Trigger the IPI. This assumes we never restore a pass-through
* interrupt which should be safe enough
*/
xive_irq_trigger(&state->ipi_data);
return true;
}
u64 kvmppc_xive_get_icp(struct kvm_vcpu *vcpu)
{
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
if (!xc)
return 0;
/* Return the per-cpu state for state saving/migration */
return (u64)xc->cppr << KVM_REG_PPC_ICP_CPPR_SHIFT |
(u64)xc->mfrr << KVM_REG_PPC_ICP_MFRR_SHIFT |
(u64)0xff << KVM_REG_PPC_ICP_PPRI_SHIFT;
}
int kvmppc_xive_set_icp(struct kvm_vcpu *vcpu, u64 icpval)
{
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
struct kvmppc_xive *xive = vcpu->kvm->arch.xive;
u8 cppr, mfrr;
u32 xisr;
if (!xc || !xive)
return -ENOENT;
/* Grab individual state fields. We don't use pending_pri */
cppr = icpval >> KVM_REG_PPC_ICP_CPPR_SHIFT;
xisr = (icpval >> KVM_REG_PPC_ICP_XISR_SHIFT) &
KVM_REG_PPC_ICP_XISR_MASK;
mfrr = icpval >> KVM_REG_PPC_ICP_MFRR_SHIFT;
pr_devel("set_icp vcpu %d cppr=0x%x mfrr=0x%x xisr=0x%x\n",
xc->server_num, cppr, mfrr, xisr);
/*
* We can't update the state of a "pushed" VCPU, but that
* shouldn't happen.
*/
if (WARN_ON(vcpu->arch.xive_pushed))
return -EIO;
/* Update VCPU HW saved state */
vcpu->arch.xive_saved_state.cppr = cppr;
xc->hw_cppr = xc->cppr = cppr;
/*
* Update MFRR state. If it's not 0xff, we mark the VCPU as
* having a pending MFRR change, which will re-evaluate the
* target. The VCPU will thus potentially get a spurious
* interrupt but that's not a big deal.
*/
xc->mfrr = mfrr;
if (mfrr < cppr)
xive_irq_trigger(&xc->vp_ipi_data);
/*
* Now saved XIRR is "interesting". It means there's something in
* the legacy "1 element" queue... for an IPI we simply ignore it,
* as the MFRR restore will handle that. For anything else we need
* to force a resend of the source.
* However the source may not have been setup yet. If that's the
* case, we keep that info and increment a counter in the xive to
* tell subsequent xive_set_source() to go look.
*/
if (xisr > XICS_IPI && !xive_restore_pending_irq(xive, xisr)) {
xc->delayed_irq = xisr;
xive->delayed_irqs++;
pr_devel(" xisr restore delayed\n");
}
return 0;
}
int kvmppc_xive_set_mapped(struct kvm *kvm, unsigned long guest_irq,
struct irq_desc *host_desc)
{
struct kvmppc_xive *xive = kvm->arch.xive;
struct kvmppc_xive_src_block *sb;
struct kvmppc_xive_irq_state *state;
struct irq_data *host_data = irq_desc_get_irq_data(host_desc);
unsigned int host_irq = irq_desc_get_irq(host_desc);
unsigned int hw_irq = (unsigned int)irqd_to_hwirq(host_data);
u16 idx;
u8 prio;
int rc;
if (!xive)
return -ENODEV;
pr_devel("set_mapped girq 0x%lx host HW irq 0x%x...\n",guest_irq, hw_irq);
sb = kvmppc_xive_find_source(xive, guest_irq, &idx);
if (!sb)
return -EINVAL;
state = &sb->irq_state[idx];
/*
* Mark the passed-through interrupt as going to a VCPU,
* this will prevent further EOIs and similar operations
* from the XIVE code. It will also mask the interrupt
* to either PQ=10 or 11 state, the latter if the interrupt
* is pending. This will allow us to unmask or retrigger it
* after routing it to the guest with a simple EOI.
*
* The "state" argument is a "token", all it needs is to be
* non-NULL to switch to passed-through or NULL for the
* other way around. We may not yet have an actual VCPU
* target here and we don't really care.
*/
rc = irq_set_vcpu_affinity(host_irq, state);
if (rc) {
pr_err("Failed to set VCPU affinity for irq %d\n", host_irq);
return rc;
}
/*
* Mask and read state of IPI. We need to know if its P bit
* is set as that means it's potentially already using a
* queue entry in the target
*/
prio = xive_lock_and_mask(xive, sb, state);
pr_devel(" old IPI prio %02x P:%d Q:%d\n", prio,
state->old_p, state->old_q);
/* Turn the IPI hard off */
xive_vm_esb_load(&state->ipi_data, XIVE_ESB_SET_PQ_01);
/* Grab info about irq */
state->pt_number = hw_irq;
state->pt_data = irq_data_get_irq_handler_data(host_data);
/*
* Configure the IRQ to match the existing configuration of
* the IPI if it was already targetted. Otherwise this will
* mask the interrupt in a lossy way (act_priority is 0xff)
* which is fine for a never started interrupt.
*/
xive_native_configure_irq(hw_irq,
KVM: PPC: Book3S HV: Pack VCORE IDs to access full VCPU ID space It is not currently possible to create the full number of possible VCPUs (KVM_MAX_VCPUS) on Power9 with KVM-HV when the guest uses fewer threads per core than its core stride (or "VSMT mode"). This is because the VCORE ID and XIVE offsets grow beyond KVM_MAX_VCPUS even though the VCPU ID is less than KVM_MAX_VCPU_ID. To address this, "pack" the VCORE ID and XIVE offsets by using knowledge of the way the VCPU IDs will be used when there are fewer guest threads per core than the core stride. The primary thread of each core will always be used first. Then, if the guest uses more than one thread per core, these secondary threads will sequentially follow the primary in each core. So, the only way an ID above KVM_MAX_VCPUS can be seen, is if the VCPUs are being spaced apart, so at least half of each core is empty, and IDs between KVM_MAX_VCPUS and (KVM_MAX_VCPUS * 2) can be mapped into the second half of each core (4..7, in an 8-thread core). Similarly, if IDs above KVM_MAX_VCPUS * 2 are seen, at least 3/4 of each core is being left empty, and we can map down into the second and third quarters of each core (2, 3 and 5, 6 in an 8-thread core). Lastly, if IDs above KVM_MAX_VCPUS * 4 are seen, only the primary threads are being used and 7/8 of the core is empty, allowing use of the 1, 5, 3 and 7 thread slots. (Strides less than 8 are handled similarly.) This allows the VCORE ID or offset to be calculated quickly from the VCPU ID or XIVE server numbers, without access to the VCPU structure. [paulus@ozlabs.org - tidied up comment a little, changed some WARN_ONCE to pr_devel, wrapped line, fixed id check.] Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-07-25 14:12:02 +08:00
xive_vp(xive, state->act_server),
state->act_priority, state->number);
/*
* We do an EOI to enable the interrupt (and retrigger if needed)
* if the guest has the interrupt unmasked and the P bit was *not*
* set in the IPI. If it was set, we know a slot may still be in
* use in the target queue thus we have to wait for a guest
* originated EOI
*/
if (prio != MASKED && !state->old_p)
xive_vm_source_eoi(hw_irq, state->pt_data);
/* Clear old_p/old_q as they are no longer relevant */
state->old_p = state->old_q = false;
/* Restore guest prio (unlocks EOI) */
mb();
state->guest_priority = prio;
arch_spin_unlock(&sb->lock);
return 0;
}
EXPORT_SYMBOL_GPL(kvmppc_xive_set_mapped);
int kvmppc_xive_clr_mapped(struct kvm *kvm, unsigned long guest_irq,
struct irq_desc *host_desc)
{
struct kvmppc_xive *xive = kvm->arch.xive;
struct kvmppc_xive_src_block *sb;
struct kvmppc_xive_irq_state *state;
unsigned int host_irq = irq_desc_get_irq(host_desc);
u16 idx;
u8 prio;
int rc;
if (!xive)
return -ENODEV;
pr_devel("clr_mapped girq 0x%lx...\n", guest_irq);
sb = kvmppc_xive_find_source(xive, guest_irq, &idx);
if (!sb)
return -EINVAL;
state = &sb->irq_state[idx];
/*
* Mask and read state of IRQ. We need to know if its P bit
* is set as that means it's potentially already using a
* queue entry in the target
*/
prio = xive_lock_and_mask(xive, sb, state);
pr_devel(" old IRQ prio %02x P:%d Q:%d\n", prio,
state->old_p, state->old_q);
/*
* If old_p is set, the interrupt is pending, we switch it to
* PQ=11. This will force a resend in the host so the interrupt
* isn't lost to whatver host driver may pick it up
*/
if (state->old_p)
xive_vm_esb_load(state->pt_data, XIVE_ESB_SET_PQ_11);
/* Release the passed-through interrupt to the host */
rc = irq_set_vcpu_affinity(host_irq, NULL);
if (rc) {
pr_err("Failed to clr VCPU affinity for irq %d\n", host_irq);
return rc;
}
/* Forget about the IRQ */
state->pt_number = 0;
state->pt_data = NULL;
/* Reconfigure the IPI */
xive_native_configure_irq(state->ipi_number,
KVM: PPC: Book3S HV: Pack VCORE IDs to access full VCPU ID space It is not currently possible to create the full number of possible VCPUs (KVM_MAX_VCPUS) on Power9 with KVM-HV when the guest uses fewer threads per core than its core stride (or "VSMT mode"). This is because the VCORE ID and XIVE offsets grow beyond KVM_MAX_VCPUS even though the VCPU ID is less than KVM_MAX_VCPU_ID. To address this, "pack" the VCORE ID and XIVE offsets by using knowledge of the way the VCPU IDs will be used when there are fewer guest threads per core than the core stride. The primary thread of each core will always be used first. Then, if the guest uses more than one thread per core, these secondary threads will sequentially follow the primary in each core. So, the only way an ID above KVM_MAX_VCPUS can be seen, is if the VCPUs are being spaced apart, so at least half of each core is empty, and IDs between KVM_MAX_VCPUS and (KVM_MAX_VCPUS * 2) can be mapped into the second half of each core (4..7, in an 8-thread core). Similarly, if IDs above KVM_MAX_VCPUS * 2 are seen, at least 3/4 of each core is being left empty, and we can map down into the second and third quarters of each core (2, 3 and 5, 6 in an 8-thread core). Lastly, if IDs above KVM_MAX_VCPUS * 4 are seen, only the primary threads are being used and 7/8 of the core is empty, allowing use of the 1, 5, 3 and 7 thread slots. (Strides less than 8 are handled similarly.) This allows the VCORE ID or offset to be calculated quickly from the VCPU ID or XIVE server numbers, without access to the VCPU structure. [paulus@ozlabs.org - tidied up comment a little, changed some WARN_ONCE to pr_devel, wrapped line, fixed id check.] Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-07-25 14:12:02 +08:00
xive_vp(xive, state->act_server),
state->act_priority, state->number);
/*
* If old_p is set (we have a queue entry potentially
* occupied) or the interrupt is masked, we set the IPI
* to PQ=10 state. Otherwise we just re-enable it (PQ=00).
*/
if (prio == MASKED || state->old_p)
xive_vm_esb_load(&state->ipi_data, XIVE_ESB_SET_PQ_10);
else
xive_vm_esb_load(&state->ipi_data, XIVE_ESB_SET_PQ_00);
/* Restore guest prio (unlocks EOI) */
mb();
state->guest_priority = prio;
arch_spin_unlock(&sb->lock);
return 0;
}
EXPORT_SYMBOL_GPL(kvmppc_xive_clr_mapped);
static void kvmppc_xive_disable_vcpu_interrupts(struct kvm_vcpu *vcpu)
{
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
struct kvm *kvm = vcpu->kvm;
struct kvmppc_xive *xive = kvm->arch.xive;
int i, j;
for (i = 0; i <= xive->max_sbid; i++) {
struct kvmppc_xive_src_block *sb = xive->src_blocks[i];
if (!sb)
continue;
for (j = 0; j < KVMPPC_XICS_IRQ_PER_ICS; j++) {
struct kvmppc_xive_irq_state *state = &sb->irq_state[j];
if (!state->valid)
continue;
if (state->act_priority == MASKED)
continue;
if (state->act_server != xc->server_num)
continue;
/* Clean it up */
arch_spin_lock(&sb->lock);
state->act_priority = MASKED;
xive_vm_esb_load(&state->ipi_data, XIVE_ESB_SET_PQ_01);
xive_native_configure_irq(state->ipi_number, 0, MASKED, 0);
if (state->pt_number) {
xive_vm_esb_load(state->pt_data, XIVE_ESB_SET_PQ_01);
xive_native_configure_irq(state->pt_number, 0, MASKED, 0);
}
arch_spin_unlock(&sb->lock);
}
}
}
void kvmppc_xive_cleanup_vcpu(struct kvm_vcpu *vcpu)
{
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
struct kvmppc_xive *xive = xc->xive;
int i;
pr_devel("cleanup_vcpu(cpu=%d)\n", xc->server_num);
/* Ensure no interrupt is still routed to that VP */
xc->valid = false;
kvmppc_xive_disable_vcpu_interrupts(vcpu);
/* Mask the VP IPI */
xive_vm_esb_load(&xc->vp_ipi_data, XIVE_ESB_SET_PQ_01);
/* Disable the VP */
xive_native_disable_vp(xc->vp_id);
/* Free the queues & associated interrupts */
for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
struct xive_q *q = &xc->queues[i];
/* Free the escalation irq */
if (xc->esc_virq[i]) {
free_irq(xc->esc_virq[i], vcpu);
irq_dispose_mapping(xc->esc_virq[i]);
kfree(xc->esc_virq_names[i]);
}
/* Free the queue */
xive_native_disable_queue(xc->vp_id, q, i);
if (q->qpage) {
free_pages((unsigned long)q->qpage,
xive->q_page_order);
q->qpage = NULL;
}
}
/* Free the IPI */
if (xc->vp_ipi) {
xive_cleanup_irq_data(&xc->vp_ipi_data);
xive_native_free_irq(xc->vp_ipi);
}
/* Free the VP */
kfree(xc);
}
int kvmppc_xive_connect_vcpu(struct kvm_device *dev,
struct kvm_vcpu *vcpu, u32 cpu)
{
struct kvmppc_xive *xive = dev->private;
struct kvmppc_xive_vcpu *xc;
int i, r = -EBUSY;
pr_devel("connect_vcpu(cpu=%d)\n", cpu);
if (dev->ops != &kvm_xive_ops) {
pr_devel("Wrong ops !\n");
return -EPERM;
}
if (xive->kvm != vcpu->kvm)
return -EPERM;
if (vcpu->arch.irq_type)
return -EBUSY;
if (kvmppc_xive_find_server(vcpu->kvm, cpu)) {
pr_devel("Duplicate !\n");
return -EEXIST;
}
KVM: PPC: Book3S HV: Pack VCORE IDs to access full VCPU ID space It is not currently possible to create the full number of possible VCPUs (KVM_MAX_VCPUS) on Power9 with KVM-HV when the guest uses fewer threads per core than its core stride (or "VSMT mode"). This is because the VCORE ID and XIVE offsets grow beyond KVM_MAX_VCPUS even though the VCPU ID is less than KVM_MAX_VCPU_ID. To address this, "pack" the VCORE ID and XIVE offsets by using knowledge of the way the VCPU IDs will be used when there are fewer guest threads per core than the core stride. The primary thread of each core will always be used first. Then, if the guest uses more than one thread per core, these secondary threads will sequentially follow the primary in each core. So, the only way an ID above KVM_MAX_VCPUS can be seen, is if the VCPUs are being spaced apart, so at least half of each core is empty, and IDs between KVM_MAX_VCPUS and (KVM_MAX_VCPUS * 2) can be mapped into the second half of each core (4..7, in an 8-thread core). Similarly, if IDs above KVM_MAX_VCPUS * 2 are seen, at least 3/4 of each core is being left empty, and we can map down into the second and third quarters of each core (2, 3 and 5, 6 in an 8-thread core). Lastly, if IDs above KVM_MAX_VCPUS * 4 are seen, only the primary threads are being used and 7/8 of the core is empty, allowing use of the 1, 5, 3 and 7 thread slots. (Strides less than 8 are handled similarly.) This allows the VCORE ID or offset to be calculated quickly from the VCPU ID or XIVE server numbers, without access to the VCPU structure. [paulus@ozlabs.org - tidied up comment a little, changed some WARN_ONCE to pr_devel, wrapped line, fixed id check.] Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-07-25 14:12:02 +08:00
if (cpu >= (KVM_MAX_VCPUS * vcpu->kvm->arch.emul_smt_mode)) {
pr_devel("Out of bounds !\n");
return -EINVAL;
}
xc = kzalloc(sizeof(*xc), GFP_KERNEL);
if (!xc)
return -ENOMEM;
/* We need to synchronize with queue provisioning */
mutex_lock(&vcpu->kvm->lock);
vcpu->arch.xive_vcpu = xc;
xc->xive = xive;
xc->vcpu = vcpu;
xc->server_num = cpu;
KVM: PPC: Book3S HV: Pack VCORE IDs to access full VCPU ID space It is not currently possible to create the full number of possible VCPUs (KVM_MAX_VCPUS) on Power9 with KVM-HV when the guest uses fewer threads per core than its core stride (or "VSMT mode"). This is because the VCORE ID and XIVE offsets grow beyond KVM_MAX_VCPUS even though the VCPU ID is less than KVM_MAX_VCPU_ID. To address this, "pack" the VCORE ID and XIVE offsets by using knowledge of the way the VCPU IDs will be used when there are fewer guest threads per core than the core stride. The primary thread of each core will always be used first. Then, if the guest uses more than one thread per core, these secondary threads will sequentially follow the primary in each core. So, the only way an ID above KVM_MAX_VCPUS can be seen, is if the VCPUs are being spaced apart, so at least half of each core is empty, and IDs between KVM_MAX_VCPUS and (KVM_MAX_VCPUS * 2) can be mapped into the second half of each core (4..7, in an 8-thread core). Similarly, if IDs above KVM_MAX_VCPUS * 2 are seen, at least 3/4 of each core is being left empty, and we can map down into the second and third quarters of each core (2, 3 and 5, 6 in an 8-thread core). Lastly, if IDs above KVM_MAX_VCPUS * 4 are seen, only the primary threads are being used and 7/8 of the core is empty, allowing use of the 1, 5, 3 and 7 thread slots. (Strides less than 8 are handled similarly.) This allows the VCORE ID or offset to be calculated quickly from the VCPU ID or XIVE server numbers, without access to the VCPU structure. [paulus@ozlabs.org - tidied up comment a little, changed some WARN_ONCE to pr_devel, wrapped line, fixed id check.] Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-07-25 14:12:02 +08:00
xc->vp_id = xive_vp(xive, cpu);
xc->mfrr = 0xff;
xc->valid = true;
r = xive_native_get_vp_info(xc->vp_id, &xc->vp_cam, &xc->vp_chip_id);
if (r)
goto bail;
/* Configure VCPU fields for use by assembly push/pull */
vcpu->arch.xive_saved_state.w01 = cpu_to_be64(0xff000000);
vcpu->arch.xive_cam_word = cpu_to_be32(xc->vp_cam | TM_QW1W2_VO);
/* Allocate IPI */
xc->vp_ipi = xive_native_alloc_irq();
if (!xc->vp_ipi) {
pr_err("Failed to allocate xive irq for VCPU IPI\n");
r = -EIO;
goto bail;
}
pr_devel(" IPI=0x%x\n", xc->vp_ipi);
r = xive_native_populate_irq_data(xc->vp_ipi, &xc->vp_ipi_data);
if (r)
goto bail;
/*
* Enable the VP first as the single escalation mode will
* affect escalation interrupts numbering
*/
r = xive_native_enable_vp(xc->vp_id, xive->single_escalation);
if (r) {
pr_err("Failed to enable VP in OPAL, err %d\n", r);
goto bail;
}
/*
* Initialize queues. Initially we set them all for no queueing
* and we enable escalation for queue 0 only which we'll use for
* our mfrr change notifications. If the VCPU is hot-plugged, we
* do handle provisioning however based on the existing "map"
* of enabled queues.
*/
for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
struct xive_q *q = &xc->queues[i];
/* Single escalation, no queue 7 */
if (i == 7 && xive->single_escalation)
break;
/* Is queue already enabled ? Provision it */
if (xive->qmap & (1 << i)) {
r = xive_provision_queue(vcpu, i);
if (r == 0 && !xive->single_escalation)
xive_attach_escalation(vcpu, i);
if (r)
goto bail;
} else {
r = xive_native_configure_queue(xc->vp_id,
q, i, NULL, 0, true);
if (r) {
pr_err("Failed to configure queue %d for VCPU %d\n",
i, cpu);
goto bail;
}
}
}
/* If not done above, attach priority 0 escalation */
r = xive_attach_escalation(vcpu, 0);
if (r)
goto bail;
/* Route the IPI */
r = xive_native_configure_irq(xc->vp_ipi, xc->vp_id, 0, XICS_IPI);
if (!r)
xive_vm_esb_load(&xc->vp_ipi_data, XIVE_ESB_SET_PQ_00);
bail:
mutex_unlock(&vcpu->kvm->lock);
if (r) {
kvmppc_xive_cleanup_vcpu(vcpu);
return r;
}
vcpu->arch.irq_type = KVMPPC_IRQ_XICS;
return 0;
}
/*
* Scanning of queues before/after migration save
*/
static void xive_pre_save_set_queued(struct kvmppc_xive *xive, u32 irq)
{
struct kvmppc_xive_src_block *sb;
struct kvmppc_xive_irq_state *state;
u16 idx;
sb = kvmppc_xive_find_source(xive, irq, &idx);
if (!sb)
return;
state = &sb->irq_state[idx];
/* Some sanity checking */
if (!state->valid) {
pr_err("invalid irq 0x%x in cpu queue!\n", irq);
return;
}
/*
* If the interrupt is in a queue it should have P set.
* We warn so that gets reported. A backtrace isn't useful
* so no need to use a WARN_ON.
*/
if (!state->saved_p)
pr_err("Interrupt 0x%x is marked in a queue but P not set !\n", irq);
/* Set flag */
state->in_queue = true;
}
static void xive_pre_save_mask_irq(struct kvmppc_xive *xive,
struct kvmppc_xive_src_block *sb,
u32 irq)
{
struct kvmppc_xive_irq_state *state = &sb->irq_state[irq];
if (!state->valid)
return;
/* Mask and save state, this will also sync HW queues */
state->saved_scan_prio = xive_lock_and_mask(xive, sb, state);
/* Transfer P and Q */
state->saved_p = state->old_p;
state->saved_q = state->old_q;
/* Unlock */
arch_spin_unlock(&sb->lock);
}
static void xive_pre_save_unmask_irq(struct kvmppc_xive *xive,
struct kvmppc_xive_src_block *sb,
u32 irq)
{
struct kvmppc_xive_irq_state *state = &sb->irq_state[irq];
if (!state->valid)
return;
/*
* Lock / exclude EOI (not technically necessary if the
* guest isn't running concurrently. If this becomes a
* performance issue we can probably remove the lock.
*/
xive_lock_for_unmask(sb, state);
/* Restore mask/prio if it wasn't masked */
if (state->saved_scan_prio != MASKED)
xive_finish_unmask(xive, sb, state, state->saved_scan_prio);
/* Unlock */
arch_spin_unlock(&sb->lock);
}
static void xive_pre_save_queue(struct kvmppc_xive *xive, struct xive_q *q)
{
u32 idx = q->idx;
u32 toggle = q->toggle;
u32 irq;
do {
irq = __xive_read_eq(q->qpage, q->msk, &idx, &toggle);
if (irq > XICS_IPI)
xive_pre_save_set_queued(xive, irq);
} while(irq);
}
static void xive_pre_save_scan(struct kvmppc_xive *xive)
{
struct kvm_vcpu *vcpu = NULL;
int i, j;
/*
* See comment in xive_get_source() about how this
* work. Collect a stable state for all interrupts
*/
for (i = 0; i <= xive->max_sbid; i++) {
struct kvmppc_xive_src_block *sb = xive->src_blocks[i];
if (!sb)
continue;
for (j = 0; j < KVMPPC_XICS_IRQ_PER_ICS; j++)
xive_pre_save_mask_irq(xive, sb, j);
}
/* Then scan the queues and update the "in_queue" flag */
kvm_for_each_vcpu(i, vcpu, xive->kvm) {
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
if (!xc)
continue;
for (j = 0; j < KVMPPC_XIVE_Q_COUNT; j++) {
KVM: PPC: Book3S: Fix typo in XICS-on-XIVE state saving code This fixes a typo where the wrong loop index was used to index the kvmppc_xive_vcpu.queues[] array in xive_pre_save_scan(). The variable i contains the vcpu number; we need to index queues[] using j, which iterates from 0 to KVMPPC_XIVE_Q_COUNT-1. The effect of this bug is that things that save the interrupt controller state, such as "virsh dump", on a VM with more than 8 vCPUs, result in xive_pre_save_queue() getting called on a bogus queue structure, usually resulting in a crash like this: [ 501.821107] Unable to handle kernel paging request for data at address 0x00000084 [ 501.821212] Faulting instruction address: 0xc008000004c7c6f8 [ 501.821234] Oops: Kernel access of bad area, sig: 11 [#1] [ 501.821305] SMP NR_CPUS=1024 [ 501.821307] NUMA [ 501.821376] PowerNV [ 501.821470] Modules linked in: vhost_net vhost tap xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables ses enclosure scsi_transport_sas ipmi_powernv ipmi_devintf ipmi_msghandler powernv_op_panel kvm_hv nfsd auth_rpcgss oid_registry nfs_acl lockd grace sunrpc kvm tg3 ptp pps_core [ 501.822477] CPU: 3 PID: 3934 Comm: live_migration Not tainted 4.11.0-4.git8caa70f.el7.centos.ppc64le #1 [ 501.822633] task: c0000003f9e3ae80 task.stack: c0000003f9ed4000 [ 501.822745] NIP: c008000004c7c6f8 LR: c008000004c7c628 CTR: 0000000030058018 [ 501.822877] REGS: c0000003f9ed7980 TRAP: 0300 Not tainted (4.11.0-4.git8caa70f.el7.centos.ppc64le) [ 501.823030] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> [ 501.823047] CR: 28022244 XER: 00000000 [ 501.823203] CFAR: c008000004c7c77c DAR: 0000000000000084 DSISR: 40000000 SOFTE: 1 [ 501.823203] GPR00: c008000004c7c628 c0000003f9ed7c00 c008000004c91450 00000000000000ff [ 501.823203] GPR04: c0000003f5580000 c0000003f559bf98 9000000000009033 0000000000000000 [ 501.823203] GPR08: 0000000000000084 0000000000000000 00000000000001e0 9000000000001003 [ 501.823203] GPR12: c00000000008a7d0 c00000000fdc1b00 000000000a9a0000 0000000000000000 [ 501.823203] GPR16: 00000000402954e8 000000000a9a0000 0000000000000004 0000000000000000 [ 501.823203] GPR20: 0000000000000008 c000000002e8f180 c000000002e8f1e0 0000000000000001 [ 501.823203] GPR24: 0000000000000008 c0000003f5580008 c0000003f4564018 c000000002e8f1e8 [ 501.823203] GPR28: 00003ff6e58bdc28 c0000003f4564000 0000000000000000 0000000000000000 [ 501.825441] NIP [c008000004c7c6f8] xive_get_attr+0x3b8/0x5b0 [kvm] [ 501.825671] LR [c008000004c7c628] xive_get_attr+0x2e8/0x5b0 [kvm] [ 501.825887] Call Trace: [ 501.825991] [c0000003f9ed7c00] [c008000004c7c628] xive_get_attr+0x2e8/0x5b0 [kvm] (unreliable) [ 501.826312] [c0000003f9ed7cd0] [c008000004c62ec4] kvm_device_ioctl_attr+0x64/0xa0 [kvm] [ 501.826581] [c0000003f9ed7d20] [c008000004c62fcc] kvm_device_ioctl+0xcc/0xf0 [kvm] [ 501.826843] [c0000003f9ed7d40] [c000000000350c70] do_vfs_ioctl+0xd0/0x8c0 [ 501.827060] [c0000003f9ed7de0] [c000000000351534] SyS_ioctl+0xd4/0xf0 [ 501.827282] [c0000003f9ed7e30] [c00000000000b8e0] system_call+0x38/0xfc [ 501.827496] Instruction dump: [ 501.827632] 419e0078 3b760008 e9160008 83fb000c 83db0010 80fb0008 2f280000 60000000 [ 501.827901] 60000000 60420000 419a0050 7be91764 <7d284c2c> 552a0ffe 7f8af040 419e003c [ 501.828176] ---[ end trace 2d0529a5bbbbafed ]--- Cc: stable@vger.kernel.org Fixes: 5af50993850a ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller") Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-06-30 14:39:55 +08:00
if (xc->queues[j].qpage)
xive_pre_save_queue(xive, &xc->queues[j]);
}
}
/* Finally restore interrupt states */
for (i = 0; i <= xive->max_sbid; i++) {
struct kvmppc_xive_src_block *sb = xive->src_blocks[i];
if (!sb)
continue;
for (j = 0; j < KVMPPC_XICS_IRQ_PER_ICS; j++)
xive_pre_save_unmask_irq(xive, sb, j);
}
}
static void xive_post_save_scan(struct kvmppc_xive *xive)
{
u32 i, j;
/* Clear all the in_queue flags */
for (i = 0; i <= xive->max_sbid; i++) {
struct kvmppc_xive_src_block *sb = xive->src_blocks[i];
if (!sb)
continue;
for (j = 0; j < KVMPPC_XICS_IRQ_PER_ICS; j++)
sb->irq_state[j].in_queue = false;
}
/* Next get_source() will do a new scan */
xive->saved_src_count = 0;
}
/*
* This returns the source configuration and state to user space.
*/
static int xive_get_source(struct kvmppc_xive *xive, long irq, u64 addr)
{
struct kvmppc_xive_src_block *sb;
struct kvmppc_xive_irq_state *state;
u64 __user *ubufp = (u64 __user *) addr;
u64 val, prio;
u16 idx;
sb = kvmppc_xive_find_source(xive, irq, &idx);
if (!sb)
return -ENOENT;
state = &sb->irq_state[idx];
if (!state->valid)
return -ENOENT;
pr_devel("get_source(%ld)...\n", irq);
/*
* So to properly save the state into something that looks like a
* XICS migration stream we cannot treat interrupts individually.
*
* We need, instead, mask them all (& save their previous PQ state)
* to get a stable state in the HW, then sync them to ensure that
* any interrupt that had already fired hits its queue, and finally
* scan all the queues to collect which interrupts are still present
* in the queues, so we can set the "pending" flag on them and
* they can be resent on restore.
*
* So we do it all when the "first" interrupt gets saved, all the
* state is collected at that point, the rest of xive_get_source()
* will merely collect and convert that state to the expected
* userspace bit mask.
*/
if (xive->saved_src_count == 0)
xive_pre_save_scan(xive);
xive->saved_src_count++;
/* Convert saved state into something compatible with xics */
val = state->act_server;
prio = state->saved_scan_prio;
if (prio == MASKED) {
val |= KVM_XICS_MASKED;
prio = state->saved_priority;
}
val |= prio << KVM_XICS_PRIORITY_SHIFT;
if (state->lsi) {
val |= KVM_XICS_LEVEL_SENSITIVE;
if (state->saved_p)
val |= KVM_XICS_PENDING;
} else {
if (state->saved_p)
val |= KVM_XICS_PRESENTED;
if (state->saved_q)
val |= KVM_XICS_QUEUED;
/*
* We mark it pending (which will attempt a re-delivery)
* if we are in a queue *or* we were masked and had
* Q set which is equivalent to the XICS "masked pending"
* state
*/
if (state->in_queue || (prio == MASKED && state->saved_q))
val |= KVM_XICS_PENDING;
}
/*
* If that was the last interrupt saved, reset the
* in_queue flags
*/
if (xive->saved_src_count == xive->src_count)
xive_post_save_scan(xive);
/* Copy the result to userspace */
if (put_user(val, ubufp))
return -EFAULT;
return 0;
}
static struct kvmppc_xive_src_block *xive_create_src_block(struct kvmppc_xive *xive,
int irq)
{
struct kvm *kvm = xive->kvm;
struct kvmppc_xive_src_block *sb;
int i, bid;
bid = irq >> KVMPPC_XICS_ICS_SHIFT;
mutex_lock(&kvm->lock);
/* block already exists - somebody else got here first */
if (xive->src_blocks[bid])
goto out;
/* Create the ICS */
sb = kzalloc(sizeof(*sb), GFP_KERNEL);
if (!sb)
goto out;
sb->id = bid;
for (i = 0; i < KVMPPC_XICS_IRQ_PER_ICS; i++) {
sb->irq_state[i].number = (bid << KVMPPC_XICS_ICS_SHIFT) | i;
sb->irq_state[i].guest_priority = MASKED;
sb->irq_state[i].saved_priority = MASKED;
sb->irq_state[i].act_priority = MASKED;
}
smp_wmb();
xive->src_blocks[bid] = sb;
if (bid > xive->max_sbid)
xive->max_sbid = bid;
out:
mutex_unlock(&kvm->lock);
return xive->src_blocks[bid];
}
static bool xive_check_delayed_irq(struct kvmppc_xive *xive, u32 irq)
{
struct kvm *kvm = xive->kvm;
struct kvm_vcpu *vcpu = NULL;
int i;
kvm_for_each_vcpu(i, vcpu, kvm) {
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
if (!xc)
continue;
if (xc->delayed_irq == irq) {
xc->delayed_irq = 0;
xive->delayed_irqs--;
return true;
}
}
return false;
}
static int xive_set_source(struct kvmppc_xive *xive, long irq, u64 addr)
{
struct kvmppc_xive_src_block *sb;
struct kvmppc_xive_irq_state *state;
u64 __user *ubufp = (u64 __user *) addr;
u16 idx;
u64 val;
u8 act_prio, guest_prio;
u32 server;
int rc = 0;
if (irq < KVMPPC_XICS_FIRST_IRQ || irq >= KVMPPC_XICS_NR_IRQS)
return -ENOENT;
pr_devel("set_source(irq=0x%lx)\n", irq);
/* Find the source */
sb = kvmppc_xive_find_source(xive, irq, &idx);
if (!sb) {
pr_devel("No source, creating source block...\n");
sb = xive_create_src_block(xive, irq);
if (!sb) {
pr_devel("Failed to create block...\n");
return -ENOMEM;
}
}
state = &sb->irq_state[idx];
/* Read user passed data */
if (get_user(val, ubufp)) {
pr_devel("fault getting user info !\n");
return -EFAULT;
}
server = val & KVM_XICS_DESTINATION_MASK;
guest_prio = val >> KVM_XICS_PRIORITY_SHIFT;
pr_devel(" val=0x016%llx (server=0x%x, guest_prio=%d)\n",
val, server, guest_prio);
/*
* If the source doesn't already have an IPI, allocate
* one and get the corresponding data
*/
if (!state->ipi_number) {
state->ipi_number = xive_native_alloc_irq();
if (state->ipi_number == 0) {
pr_devel("Failed to allocate IPI !\n");
return -ENOMEM;
}
xive_native_populate_irq_data(state->ipi_number, &state->ipi_data);
pr_devel(" src_ipi=0x%x\n", state->ipi_number);
}
/*
* We use lock_and_mask() to set us in the right masked
* state. We will override that state from the saved state
* further down, but this will handle the cases of interrupts
* that need FW masking. We set the initial guest_priority to
* 0 before calling it to ensure it actually performs the masking.
*/
state->guest_priority = 0;
xive_lock_and_mask(xive, sb, state);
/*
* Now, we select a target if we have one. If we don't we
* leave the interrupt untargetted. It means that an interrupt
* can become "untargetted" accross migration if it was masked
* by set_xive() but there is little we can do about it.
*/
/* First convert prio and mark interrupt as untargetted */
act_prio = xive_prio_from_guest(guest_prio);
state->act_priority = MASKED;
/*
* We need to drop the lock due to the mutex below. Hopefully
* nothing is touching that interrupt yet since it hasn't been
* advertized to a running guest yet
*/
arch_spin_unlock(&sb->lock);
/* If we have a priority target the interrupt */
if (act_prio != MASKED) {
/* First, check provisioning of queues */
mutex_lock(&xive->kvm->lock);
rc = xive_check_provisioning(xive->kvm, act_prio);
mutex_unlock(&xive->kvm->lock);
/* Target interrupt */
if (rc == 0)
rc = xive_target_interrupt(xive->kvm, state,
server, act_prio);
/*
* If provisioning or targetting failed, leave it
* alone and masked. It will remain disabled until
* the guest re-targets it.
*/
}
/*
* Find out if this was a delayed irq stashed in an ICP,
* in which case, treat it as pending
*/
if (xive->delayed_irqs && xive_check_delayed_irq(xive, irq)) {
val |= KVM_XICS_PENDING;
pr_devel(" Found delayed ! forcing PENDING !\n");
}
/* Cleanup the SW state */
state->old_p = false;
state->old_q = false;
state->lsi = false;
state->asserted = false;
/* Restore LSI state */
if (val & KVM_XICS_LEVEL_SENSITIVE) {
state->lsi = true;
if (val & KVM_XICS_PENDING)
state->asserted = true;
pr_devel(" LSI ! Asserted=%d\n", state->asserted);
}
/*
* Restore P and Q. If the interrupt was pending, we
* force Q and !P, which will trigger a resend.
*
* That means that a guest that had both an interrupt
* pending (queued) and Q set will restore with only
* one instance of that interrupt instead of 2, but that
* is perfectly fine as coalescing interrupts that haven't
* been presented yet is always allowed.
*/
if (val & KVM_XICS_PRESENTED && !(val & KVM_XICS_PENDING))
state->old_p = true;
if (val & KVM_XICS_QUEUED || val & KVM_XICS_PENDING)
state->old_q = true;
pr_devel(" P=%d, Q=%d\n", state->old_p, state->old_q);
/*
* If the interrupt was unmasked, update guest priority and
* perform the appropriate state transition and do a
* re-trigger if necessary.
*/
if (val & KVM_XICS_MASKED) {
pr_devel(" masked, saving prio\n");
state->guest_priority = MASKED;
state->saved_priority = guest_prio;
} else {
pr_devel(" unmasked, restoring to prio %d\n", guest_prio);
xive_finish_unmask(xive, sb, state, guest_prio);
state->saved_priority = guest_prio;
}
/* Increment the number of valid sources and mark this one valid */
if (!state->valid)
xive->src_count++;
state->valid = true;
return 0;
}
int kvmppc_xive_set_irq(struct kvm *kvm, int irq_source_id, u32 irq, int level,
bool line_status)
{
struct kvmppc_xive *xive = kvm->arch.xive;
struct kvmppc_xive_src_block *sb;
struct kvmppc_xive_irq_state *state;
u16 idx;
if (!xive)
return -ENODEV;
sb = kvmppc_xive_find_source(xive, irq, &idx);
if (!sb)
return -EINVAL;
/* Perform locklessly .... (we need to do some RCUisms here...) */
state = &sb->irq_state[idx];
if (!state->valid)
return -EINVAL;
/* We don't allow a trigger on a passed-through interrupt */
if (state->pt_number)
return -EINVAL;
if ((level == 1 && state->lsi) || level == KVM_INTERRUPT_SET_LEVEL)
state->asserted = 1;
else if (level == 0 || level == KVM_INTERRUPT_UNSET) {
state->asserted = 0;
return 0;
}
/* Trigger the IPI */
xive_irq_trigger(&state->ipi_data);
return 0;
}
static int xive_set_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
{
struct kvmppc_xive *xive = dev->private;
/* We honor the existing XICS ioctl */
switch (attr->group) {
case KVM_DEV_XICS_GRP_SOURCES:
return xive_set_source(xive, attr->attr, attr->addr);
}
return -ENXIO;
}
static int xive_get_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
{
struct kvmppc_xive *xive = dev->private;
/* We honor the existing XICS ioctl */
switch (attr->group) {
case KVM_DEV_XICS_GRP_SOURCES:
return xive_get_source(xive, attr->attr, attr->addr);
}
return -ENXIO;
}
static int xive_has_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
{
/* We honor the same limits as XICS, at least for now */
switch (attr->group) {
case KVM_DEV_XICS_GRP_SOURCES:
if (attr->attr >= KVMPPC_XICS_FIRST_IRQ &&
attr->attr < KVMPPC_XICS_NR_IRQS)
return 0;
break;
}
return -ENXIO;
}
static void kvmppc_xive_cleanup_irq(u32 hw_num, struct xive_irq_data *xd)
{
xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_01);
xive_native_configure_irq(hw_num, 0, MASKED, 0);
xive_cleanup_irq_data(xd);
}
static void kvmppc_xive_free_sources(struct kvmppc_xive_src_block *sb)
{
int i;
for (i = 0; i < KVMPPC_XICS_IRQ_PER_ICS; i++) {
struct kvmppc_xive_irq_state *state = &sb->irq_state[i];
if (!state->valid)
continue;
kvmppc_xive_cleanup_irq(state->ipi_number, &state->ipi_data);
xive_native_free_irq(state->ipi_number);
/* Pass-through, cleanup too */
if (state->pt_number)
kvmppc_xive_cleanup_irq(state->pt_number, state->pt_data);
state->valid = false;
}
}
static void kvmppc_xive_free(struct kvm_device *dev)
{
struct kvmppc_xive *xive = dev->private;
struct kvm *kvm = xive->kvm;
int i;
debugfs_remove(xive->dentry);
if (kvm)
kvm->arch.xive = NULL;
/* Mask and free interrupts */
for (i = 0; i <= xive->max_sbid; i++) {
if (xive->src_blocks[i])
kvmppc_xive_free_sources(xive->src_blocks[i]);
kfree(xive->src_blocks[i]);
xive->src_blocks[i] = NULL;
}
if (xive->vp_base != XIVE_INVALID_VP)
xive_native_free_vp_block(xive->vp_base);
kfree(xive);
kfree(dev);
}
static int kvmppc_xive_create(struct kvm_device *dev, u32 type)
{
struct kvmppc_xive *xive;
struct kvm *kvm = dev->kvm;
int ret = 0;
pr_devel("Creating xive for partition\n");
xive = kzalloc(sizeof(*xive), GFP_KERNEL);
if (!xive)
return -ENOMEM;
dev->private = xive;
xive->dev = dev;
xive->kvm = kvm;
/* Already there ? */
if (kvm->arch.xive)
ret = -EEXIST;
else
kvm->arch.xive = xive;
/* We use the default queue size set by the host */
xive->q_order = xive_native_default_eq_shift();
if (xive->q_order < PAGE_SHIFT)
xive->q_page_order = 0;
else
xive->q_page_order = xive->q_order - PAGE_SHIFT;
/* Allocate a bunch of VPs */
xive->vp_base = xive_native_alloc_vp_block(KVM_MAX_VCPUS);
pr_devel("VP_Base=%x\n", xive->vp_base);
if (xive->vp_base == XIVE_INVALID_VP)
ret = -ENOMEM;
xive->single_escalation = xive_native_has_single_escalation();
if (ret) {
kfree(xive);
return ret;
}
return 0;
}
static int xive_debug_show(struct seq_file *m, void *private)
{
struct kvmppc_xive *xive = m->private;
struct kvm *kvm = xive->kvm;
struct kvm_vcpu *vcpu;
u64 t_rm_h_xirr = 0;
u64 t_rm_h_ipoll = 0;
u64 t_rm_h_cppr = 0;
u64 t_rm_h_eoi = 0;
u64 t_rm_h_ipi = 0;
u64 t_vm_h_xirr = 0;
u64 t_vm_h_ipoll = 0;
u64 t_vm_h_cppr = 0;
u64 t_vm_h_eoi = 0;
u64 t_vm_h_ipi = 0;
unsigned int i;
if (!kvm)
return 0;
seq_printf(m, "=========\nVCPU state\n=========\n");
kvm_for_each_vcpu(i, vcpu, kvm) {
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
unsigned int i;
if (!xc)
continue;
seq_printf(m, "cpu server %#x CPPR:%#x HWCPPR:%#x"
" MFRR:%#x PEND:%#x h_xirr: R=%lld V=%lld\n",
xc->server_num, xc->cppr, xc->hw_cppr,
xc->mfrr, xc->pending,
xc->stat_rm_h_xirr, xc->stat_vm_h_xirr);
for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
struct xive_q *q = &xc->queues[i];
u32 i0, i1, idx;
if (!q->qpage && !xc->esc_virq[i])
continue;
seq_printf(m, " [q%d]: ", i);
if (q->qpage) {
idx = q->idx;
i0 = be32_to_cpup(q->qpage + idx);
idx = (idx + 1) & q->msk;
i1 = be32_to_cpup(q->qpage + idx);
seq_printf(m, "T=%d %08x %08x... \n", q->toggle, i0, i1);
}
if (xc->esc_virq[i]) {
struct irq_data *d = irq_get_irq_data(xc->esc_virq[i]);
struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
u64 pq = xive_vm_esb_load(xd, XIVE_ESB_GET);
seq_printf(m, "E:%c%c I(%d:%llx:%llx)",
(pq & XIVE_ESB_VAL_P) ? 'P' : 'p',
(pq & XIVE_ESB_VAL_Q) ? 'Q' : 'q',
xc->esc_virq[i], pq, xd->eoi_page);
seq_printf(m, "\n");
}
}
t_rm_h_xirr += xc->stat_rm_h_xirr;
t_rm_h_ipoll += xc->stat_rm_h_ipoll;
t_rm_h_cppr += xc->stat_rm_h_cppr;
t_rm_h_eoi += xc->stat_rm_h_eoi;
t_rm_h_ipi += xc->stat_rm_h_ipi;
t_vm_h_xirr += xc->stat_vm_h_xirr;
t_vm_h_ipoll += xc->stat_vm_h_ipoll;
t_vm_h_cppr += xc->stat_vm_h_cppr;
t_vm_h_eoi += xc->stat_vm_h_eoi;
t_vm_h_ipi += xc->stat_vm_h_ipi;
}
seq_printf(m, "Hcalls totals\n");
seq_printf(m, " H_XIRR R=%10lld V=%10lld\n", t_rm_h_xirr, t_vm_h_xirr);
seq_printf(m, " H_IPOLL R=%10lld V=%10lld\n", t_rm_h_ipoll, t_vm_h_ipoll);
seq_printf(m, " H_CPPR R=%10lld V=%10lld\n", t_rm_h_cppr, t_vm_h_cppr);
seq_printf(m, " H_EOI R=%10lld V=%10lld\n", t_rm_h_eoi, t_vm_h_eoi);
seq_printf(m, " H_IPI R=%10lld V=%10lld\n", t_rm_h_ipi, t_vm_h_ipi);
return 0;
}
static int xive_debug_open(struct inode *inode, struct file *file)
{
return single_open(file, xive_debug_show, inode->i_private);
}
static const struct file_operations xive_debug_fops = {
.open = xive_debug_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static void xive_debugfs_init(struct kvmppc_xive *xive)
{
char *name;
name = kasprintf(GFP_KERNEL, "kvm-xive-%p", xive);
if (!name) {
pr_err("%s: no memory for name\n", __func__);
return;
}
xive->dentry = debugfs_create_file(name, S_IRUGO, powerpc_debugfs_root,
xive, &xive_debug_fops);
pr_debug("%s: created %s\n", __func__, name);
kfree(name);
}
static void kvmppc_xive_init(struct kvm_device *dev)
{
struct kvmppc_xive *xive = (struct kvmppc_xive *)dev->private;
/* Register some debug interfaces */
xive_debugfs_init(xive);
}
struct kvm_device_ops kvm_xive_ops = {
.name = "kvm-xive",
.create = kvmppc_xive_create,
.init = kvmppc_xive_init,
.destroy = kvmppc_xive_free,
.set_attr = xive_set_attr,
.get_attr = xive_get_attr,
.has_attr = xive_has_attr,
};
void kvmppc_xive_init_module(void)
{
__xive_vm_h_xirr = xive_vm_h_xirr;
__xive_vm_h_ipoll = xive_vm_h_ipoll;
__xive_vm_h_ipi = xive_vm_h_ipi;
__xive_vm_h_cppr = xive_vm_h_cppr;
__xive_vm_h_eoi = xive_vm_h_eoi;
}
void kvmppc_xive_exit_module(void)
{
__xive_vm_h_xirr = NULL;
__xive_vm_h_ipoll = NULL;
__xive_vm_h_ipi = NULL;
__xive_vm_h_cppr = NULL;
__xive_vm_h_eoi = NULL;
}