linux/arch/arm/mach-mx5/board-mx53_evk.c

159 lines
4.1 KiB
C
Raw Normal View History

/*
* Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/fec.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx53.h>
#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
#define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30)
#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19)
#include "crm_regs.h"
#include "devices-imx53.h"
static iomux_v3_cfg_t mx53_evk_pads[] = {
MX53_PAD_CSI0_D10__UART1_TXD,
MX53_PAD_CSI0_D11__UART1_RXD,
MX53_PAD_ATA_DIOW__UART1_TXD,
MX53_PAD_ATA_DMACK__UART1_RXD,
MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
MX53_PAD_ATA_DMARQ__UART2_TXD,
MX53_PAD_ATA_DIOR__UART2_RTS,
MX53_PAD_ATA_INTRQ__UART2_CTS,
MX53_PAD_ATA_CS_0__UART3_TXD,
MX53_PAD_ATA_CS_1__UART3_RXD,
MX53_PAD_ATA_DA_1__UART3_CTS,
MX53_PAD_ATA_DA_2__UART3_RTS,
MX53_PAD_EIM_D16__CSPI1_SCLK,
MX53_PAD_EIM_D17__CSPI1_MISO,
MX53_PAD_EIM_D18__CSPI1_MOSI,
/* ecspi chip select lines */
MX53_PAD_EIM_EB2__GPIO_2_30,
MX53_PAD_EIM_D19__GPIO_3_19,
};
static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static inline void mx53_evk_init_uart(void)
{
imx53_add_imx_uart(0, &mx53_evk_uart_pdata);
imx53_add_imx_uart(1, &mx53_evk_uart_pdata);
imx53_add_imx_uart(2, &mx53_evk_uart_pdata);
}
static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = {
.bitrate = 100000,
};
static inline void mx53_evk_fec_reset(void)
{
int ret;
/* reset FEC PHY */
ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
if (ret) {
printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
return;
}
gpio_direction_output(SMD_FEC_PHY_RST, 0);
gpio_set_value(SMD_FEC_PHY_RST, 0);
msleep(1);
gpio_set_value(SMD_FEC_PHY_RST, 1);
}
static struct fec_platform_data mx53_evk_fec_pdata = {
.phy = PHY_INTERFACE_MODE_RMII,
};
static struct spi_board_info mx53_evk_spi_board_info[] __initdata = {
{
.modalias = "mtd_dataflash",
.max_speed_hz = 25000000,
.bus_num = 0,
.chip_select = 1,
.mode = SPI_MODE_0,
.platform_data = NULL,
},
};
static int mx53_evk_spi_cs[] = {
EVK_ECSPI1_CS0,
EVK_ECSPI1_CS1,
};
static const struct spi_imx_master mx53_evk_spi_data __initconst = {
.chipselect = mx53_evk_spi_cs,
.num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
};
static void __init mx53_evk_board_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
ARRAY_SIZE(mx53_evk_pads));
mx53_evk_init_uart();
mx53_evk_fec_reset();
imx53_add_fec(&mx53_evk_fec_pdata);
imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
imx53_add_sdhci_esdhc_imx(0, NULL);
imx53_add_sdhci_esdhc_imx(1, NULL);
spi_register_board_info(mx53_evk_spi_board_info,
ARRAY_SIZE(mx53_evk_spi_board_info));
imx53_add_ecspi(0, &mx53_evk_spi_data);
}
static void __init mx53_evk_timer_init(void)
{
mx53_clocks_init(32768, 24000000, 22579200, 0);
}
static struct sys_timer mx53_evk_timer = {
.init = mx53_evk_timer_init,
};
MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
.map_io = mx53_map_io,
.init_irq = mx53_init_irq,
.init_machine = mx53_evk_board_init,
.timer = &mx53_evk_timer,
MACHINE_END