linux/net/ipv4/inetpeer.c

552 lines
17 KiB
C
Raw Normal View History

/*
* INETPEER - A storage for permanent information about peers
*
* This source is covered by the GNU GPL, the same as all kernel sources.
*
* Authors: Andrey V. Savochkin <saw@msu.ru>
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/random.h>
#include <linux/timer.h>
#include <linux/time.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/net.h>
#include <net/ip.h>
#include <net/inetpeer.h>
/*
* Theory of operations.
* We keep one entry for each peer IP address. The nodes contains long-living
* information about the peer which doesn't depend on routes.
* At this moment this information consists only of ID field for the next
* outgoing IP packet. This field is incremented with each packet as encoded
* in inet_getid() function (include/net/inetpeer.h).
* At the moment of writing this notes identifier of IP packets is generated
* to be unpredictable using this code only for packets subjected
* (actually or potentially) to defragmentation. I.e. DF packets less than
* PMTU in size uses a constant ID and do not use this code (see
* ip_select_ident() in include/net/ip.h).
*
* Route cache entries hold references to our nodes.
* New cache entries get references via lookup by destination IP address in
* the avl tree. The reference is grabbed only when it's needed i.e. only
* when we try to output IP packet which needs an unpredictable ID (see
* __ip_select_ident() in net/ipv4/route.c).
* Nodes are removed only when reference counter goes to 0.
* When it's happened the node may be removed when a sufficient amount of
* time has been passed since its last use. The less-recently-used entry can
* also be removed if the pool is overloaded i.e. if the total amount of
* entries is greater-or-equal than the threshold.
*
* Node pool is organised as an AVL tree.
* Such an implementation has been chosen not just for fun. It's a way to
* prevent easy and efficient DoS attacks by creating hash collisions. A huge
* amount of long living nodes in a single hash slot would significantly delay
* lookups performed with disabled BHs.
*
* Serialisation issues.
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
* 1. Nodes may appear in the tree only with the pool lock held.
* 2. Nodes may disappear from the tree only with the pool lock held
* AND reference count being 0.
* 3. Nodes appears and disappears from unused node list only under
* "inet_peer_unused_lock".
* 4. Global variable peer_total is modified under the pool lock.
* 5. struct inet_peer fields modification:
* avl_left, avl_right, avl_parent, avl_height: pool lock
* unused: unused node list lock
* refcnt: atomically against modifications on other CPU;
* usually under some other lock to prevent node disappearing
* dtime: unused node list lock
* daddr: unchangeable
* ip_id_count: atomic value (no lock needed)
*/
static struct kmem_cache *peer_cachep __read_mostly;
#define node_height(x) x->avl_height
#define peer_avl_empty ((struct inet_peer *)&peer_fake_node)
#define peer_avl_empty_rcu ((struct inet_peer __rcu __force *)&peer_fake_node)
static const struct inet_peer peer_fake_node = {
.avl_left = peer_avl_empty_rcu,
.avl_right = peer_avl_empty_rcu,
.avl_height = 0
};
static struct inet_peer_base {
struct inet_peer __rcu *root;
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
spinlock_t lock;
int total;
} v4_peers = {
.root = peer_avl_empty_rcu,
.lock = __SPIN_LOCK_UNLOCKED(v4_peers.lock),
.total = 0,
};
#define PEER_MAXDEPTH 40 /* sufficient for about 2^27 nodes */
/* Exported for sysctl_net_ipv4. */
int inet_peer_threshold __read_mostly = 65536 + 128; /* start to throw entries more
* aggressively at this stage */
int inet_peer_minttl __read_mostly = 120 * HZ; /* TTL under high load: 120 sec */
int inet_peer_maxttl __read_mostly = 10 * 60 * HZ; /* usual time to live: 10 min */
int inet_peer_gc_mintime __read_mostly = 10 * HZ;
int inet_peer_gc_maxtime __read_mostly = 120 * HZ;
static struct {
struct list_head list;
spinlock_t lock;
} unused_peers = {
.list = LIST_HEAD_INIT(unused_peers.list),
.lock = __SPIN_LOCK_UNLOCKED(unused_peers.lock),
};
static void peer_check_expire(unsigned long dummy);
static DEFINE_TIMER(peer_periodic_timer, peer_check_expire, 0, 0);
/* Called from ip_output.c:ip_init */
void __init inet_initpeers(void)
{
struct sysinfo si;
/* Use the straight interface to information about memory. */
si_meminfo(&si);
/* The values below were suggested by Alexey Kuznetsov
* <kuznet@ms2.inr.ac.ru>. I don't have any opinion about the values
* myself. --SAW
*/
if (si.totalram <= (32768*1024)/PAGE_SIZE)
inet_peer_threshold >>= 1; /* max pool size about 1MB on IA32 */
if (si.totalram <= (16384*1024)/PAGE_SIZE)
inet_peer_threshold >>= 1; /* about 512KB */
if (si.totalram <= (8192*1024)/PAGE_SIZE)
inet_peer_threshold >>= 2; /* about 128KB */
peer_cachep = kmem_cache_create("inet_peer_cache",
sizeof(struct inet_peer),
0, SLAB_HWCACHE_ALIGN | SLAB_PANIC,
NULL);
/* All the timers, started at system startup tend
to synchronize. Perturb it a bit.
*/
peer_periodic_timer.expires = jiffies
+ net_random() % inet_peer_gc_maxtime
+ inet_peer_gc_maxtime;
add_timer(&peer_periodic_timer);
}
/* Called with or without local BH being disabled. */
static void unlink_from_unused(struct inet_peer *p)
{
if (!list_empty(&p->unused)) {
spin_lock_bh(&unused_peers.lock);
list_del_init(&p->unused);
spin_unlock_bh(&unused_peers.lock);
}
}
/*
* Called with local BH disabled and the pool lock held.
*/
#define lookup(_daddr, _stack, _base) \
({ \
struct inet_peer *u; \
struct inet_peer __rcu **v; \
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
\
stackptr = _stack; \
*stackptr++ = &_base->root; \
for (u = rcu_dereference_protected(_base->root, \
lockdep_is_held(&_base->lock)); \
u != peer_avl_empty; ) { \
if (_daddr == u->daddr.a4) \
break; \
if ((__force __u32)_daddr < (__force __u32)u->daddr.a4) \
v = &u->avl_left; \
else \
v = &u->avl_right; \
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
*stackptr++ = v; \
u = rcu_dereference_protected(*v, \
lockdep_is_held(&_base->lock)); \
} \
u; \
})
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
/*
* Called with rcu_read_lock_bh()
* Because we hold no lock against a writer, its quite possible we fall
* in an endless loop.
* But every pointer we follow is guaranteed to be valid thanks to RCU.
* We exit from this function if number of links exceeds PEER_MAXDEPTH
*/
static struct inet_peer *lookup_rcu_bh(__be32 daddr, struct inet_peer_base *base)
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
{
struct inet_peer *u = rcu_dereference_bh(base->root);
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
int count = 0;
while (u != peer_avl_empty) {
if (daddr == u->daddr.a4) {
/* Before taking a reference, check if this entry was
* deleted, unlink_from_pool() sets refcnt=-1 to make
* distinction between an unused entry (refcnt=0) and
* a freed one.
*/
if (unlikely(!atomic_add_unless(&u->refcnt, 1, -1)))
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
u = NULL;
return u;
}
if ((__force __u32)daddr < (__force __u32)u->daddr.a4)
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
u = rcu_dereference_bh(u->avl_left);
else
u = rcu_dereference_bh(u->avl_right);
if (unlikely(++count == PEER_MAXDEPTH))
break;
}
return NULL;
}
/* Called with local BH disabled and the pool lock held. */
#define lookup_rightempty(start, base) \
({ \
struct inet_peer *u; \
struct inet_peer __rcu **v; \
*stackptr++ = &start->avl_left; \
v = &start->avl_left; \
for (u = rcu_dereference_protected(*v, \
lockdep_is_held(&base->lock)); \
u->avl_right != peer_avl_empty_rcu; ) { \
v = &u->avl_right; \
*stackptr++ = v; \
u = rcu_dereference_protected(*v, \
lockdep_is_held(&base->lock)); \
} \
u; \
})
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
/* Called with local BH disabled and the pool lock held.
* Variable names are the proof of operation correctness.
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
* Look into mm/map_avl.c for more detail description of the ideas.
*/
static void peer_avl_rebalance(struct inet_peer __rcu **stack[],
struct inet_peer __rcu ***stackend,
struct inet_peer_base *base)
{
struct inet_peer __rcu **nodep;
struct inet_peer *node, *l, *r;
int lh, rh;
while (stackend > stack) {
nodep = *--stackend;
node = rcu_dereference_protected(*nodep,
lockdep_is_held(&base->lock));
l = rcu_dereference_protected(node->avl_left,
lockdep_is_held(&base->lock));
r = rcu_dereference_protected(node->avl_right,
lockdep_is_held(&base->lock));
lh = node_height(l);
rh = node_height(r);
if (lh > rh + 1) { /* l: RH+2 */
struct inet_peer *ll, *lr, *lrl, *lrr;
int lrh;
ll = rcu_dereference_protected(l->avl_left,
lockdep_is_held(&base->lock));
lr = rcu_dereference_protected(l->avl_right,
lockdep_is_held(&base->lock));
lrh = node_height(lr);
if (lrh <= node_height(ll)) { /* ll: RH+1 */
RCU_INIT_POINTER(node->avl_left, lr); /* lr: RH or RH+1 */
RCU_INIT_POINTER(node->avl_right, r); /* r: RH */
node->avl_height = lrh + 1; /* RH+1 or RH+2 */
RCU_INIT_POINTER(l->avl_left, ll); /* ll: RH+1 */
RCU_INIT_POINTER(l->avl_right, node); /* node: RH+1 or RH+2 */
l->avl_height = node->avl_height + 1;
RCU_INIT_POINTER(*nodep, l);
} else { /* ll: RH, lr: RH+1 */
lrl = rcu_dereference_protected(lr->avl_left,
lockdep_is_held(&base->lock)); /* lrl: RH or RH-1 */
lrr = rcu_dereference_protected(lr->avl_right,
lockdep_is_held(&base->lock)); /* lrr: RH or RH-1 */
RCU_INIT_POINTER(node->avl_left, lrr); /* lrr: RH or RH-1 */
RCU_INIT_POINTER(node->avl_right, r); /* r: RH */
node->avl_height = rh + 1; /* node: RH+1 */
RCU_INIT_POINTER(l->avl_left, ll); /* ll: RH */
RCU_INIT_POINTER(l->avl_right, lrl); /* lrl: RH or RH-1 */
l->avl_height = rh + 1; /* l: RH+1 */
RCU_INIT_POINTER(lr->avl_left, l); /* l: RH+1 */
RCU_INIT_POINTER(lr->avl_right, node); /* node: RH+1 */
lr->avl_height = rh + 2;
RCU_INIT_POINTER(*nodep, lr);
}
} else if (rh > lh + 1) { /* r: LH+2 */
struct inet_peer *rr, *rl, *rlr, *rll;
int rlh;
rr = rcu_dereference_protected(r->avl_right,
lockdep_is_held(&base->lock));
rl = rcu_dereference_protected(r->avl_left,
lockdep_is_held(&base->lock));
rlh = node_height(rl);
if (rlh <= node_height(rr)) { /* rr: LH+1 */
RCU_INIT_POINTER(node->avl_right, rl); /* rl: LH or LH+1 */
RCU_INIT_POINTER(node->avl_left, l); /* l: LH */
node->avl_height = rlh + 1; /* LH+1 or LH+2 */
RCU_INIT_POINTER(r->avl_right, rr); /* rr: LH+1 */
RCU_INIT_POINTER(r->avl_left, node); /* node: LH+1 or LH+2 */
r->avl_height = node->avl_height + 1;
RCU_INIT_POINTER(*nodep, r);
} else { /* rr: RH, rl: RH+1 */
rlr = rcu_dereference_protected(rl->avl_right,
lockdep_is_held(&base->lock)); /* rlr: LH or LH-1 */
rll = rcu_dereference_protected(rl->avl_left,
lockdep_is_held(&base->lock)); /* rll: LH or LH-1 */
RCU_INIT_POINTER(node->avl_right, rll); /* rll: LH or LH-1 */
RCU_INIT_POINTER(node->avl_left, l); /* l: LH */
node->avl_height = lh + 1; /* node: LH+1 */
RCU_INIT_POINTER(r->avl_right, rr); /* rr: LH */
RCU_INIT_POINTER(r->avl_left, rlr); /* rlr: LH or LH-1 */
r->avl_height = lh + 1; /* r: LH+1 */
RCU_INIT_POINTER(rl->avl_right, r); /* r: LH+1 */
RCU_INIT_POINTER(rl->avl_left, node); /* node: LH+1 */
rl->avl_height = lh + 2;
RCU_INIT_POINTER(*nodep, rl);
}
} else {
node->avl_height = (lh > rh ? lh : rh) + 1;
}
}
}
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
/* Called with local BH disabled and the pool lock held. */
#define link_to_pool(n, base) \
do { \
n->avl_height = 1; \
n->avl_left = peer_avl_empty_rcu; \
n->avl_right = peer_avl_empty_rcu; \
/* lockless readers can catch us now */ \
rcu_assign_pointer(**--stackptr, n); \
peer_avl_rebalance(stack, stackptr, base); \
} while (0)
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
static void inetpeer_free_rcu(struct rcu_head *head)
{
kmem_cache_free(peer_cachep, container_of(head, struct inet_peer, rcu));
}
/* May be called with local BH enabled. */
static void unlink_from_pool(struct inet_peer *p, struct inet_peer_base *base)
{
int do_free;
do_free = 0;
spin_lock_bh(&base->lock);
/* Check the reference counter. It was artificially incremented by 1
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
* in cleanup() function to prevent sudden disappearing. If we can
* atomically (because of lockless readers) take this last reference,
* it's safe to remove the node and free it later.
* We use refcnt=-1 to alert lockless readers this entry is deleted.
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
*/
if (atomic_cmpxchg(&p->refcnt, 1, -1) == 1) {
struct inet_peer __rcu **stack[PEER_MAXDEPTH];
struct inet_peer __rcu ***stackptr, ***delp;
if (lookup(p->daddr.a4, stack, base) != p)
BUG();
delp = stackptr - 1; /* *delp[0] == p */
if (p->avl_left == peer_avl_empty_rcu) {
*delp[0] = p->avl_right;
--stackptr;
} else {
/* look for a node to insert instead of p */
struct inet_peer *t;
t = lookup_rightempty(p, base);
BUG_ON(rcu_dereference_protected(*stackptr[-1],
lockdep_is_held(&base->lock)) != t);
**--stackptr = t->avl_left;
/* t is removed, t->daddr > x->daddr for any
* x in p->avl_left subtree.
* Put t in the old place of p. */
RCU_INIT_POINTER(*delp[0], t);
t->avl_left = p->avl_left;
t->avl_right = p->avl_right;
t->avl_height = p->avl_height;
BUG_ON(delp[1] != &p->avl_left);
delp[1] = &t->avl_left; /* was &p->avl_left */
}
peer_avl_rebalance(stack, stackptr, base);
base->total--;
do_free = 1;
}
spin_unlock_bh(&base->lock);
if (do_free)
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
call_rcu_bh(&p->rcu, inetpeer_free_rcu);
else
/* The node is used again. Decrease the reference counter
* back. The loop "cleanup -> unlink_from_unused
* -> unlink_from_pool -> putpeer -> link_to_unused
* -> cleanup (for the same node)"
* doesn't really exist because the entry will have a
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
* recent deletion time and will not be cleaned again soon.
*/
inet_putpeer(p);
}
static struct inet_peer_base *peer_to_base(struct inet_peer *p)
{
return &v4_peers;
}
/* May be called with local BH enabled. */
static int cleanup_once(unsigned long ttl)
{
struct inet_peer *p = NULL;
/* Remove the first entry from the list of unused nodes. */
spin_lock_bh(&unused_peers.lock);
if (!list_empty(&unused_peers.list)) {
__u32 delta;
p = list_first_entry(&unused_peers.list, struct inet_peer, unused);
delta = (__u32)jiffies - p->dtime;
if (delta < ttl) {
/* Do not prune fresh entries. */
spin_unlock_bh(&unused_peers.lock);
return -1;
}
list_del_init(&p->unused);
/* Grab an extra reference to prevent node disappearing
* before unlink_from_pool() call. */
atomic_inc(&p->refcnt);
}
spin_unlock_bh(&unused_peers.lock);
if (p == NULL)
/* It means that the total number of USED entries has
* grown over inet_peer_threshold. It shouldn't really
* happen because of entry limits in route cache. */
return -1;
unlink_from_pool(p, peer_to_base(p));
return 0;
}
static struct inet_peer_base *family_to_base(int family)
{
return &v4_peers;
}
/* Called with or without local BH being disabled. */
struct inet_peer *inet_getpeer(__be32 daddr, int create)
{
struct inet_peer __rcu **stack[PEER_MAXDEPTH], ***stackptr;
struct inet_peer_base *base = family_to_base(AF_INET);
struct inet_peer *p;
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
/* Look up for the address quickly, lockless.
* Because of a concurrent writer, we might not find an existing entry.
*/
rcu_read_lock_bh();
p = lookup_rcu_bh(daddr, base);
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
rcu_read_unlock_bh();
if (p) {
/* The existing node has been found.
* Remove the entry from unused list if it was there.
*/
unlink_from_unused(p);
return p;
}
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
/* retry an exact lookup, taking the lock before.
* At least, nodes should be hot in our cache.
*/
spin_lock_bh(&base->lock);
p = lookup(daddr, stack, base);
if (p != peer_avl_empty) {
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
atomic_inc(&p->refcnt);
spin_unlock_bh(&base->lock);
/* Remove the entry from unused list if it was there. */
unlink_from_unused(p);
return p;
}
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
p = create ? kmem_cache_alloc(peer_cachep, GFP_ATOMIC) : NULL;
if (p) {
p->daddr.a4 = daddr;
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
atomic_set(&p->refcnt, 1);
atomic_set(&p->rid, 0);
atomic_set(&p->ip_id_count, secure_ip_id(daddr));
p->tcp_ts_stamp = 0;
INIT_LIST_HEAD(&p->unused);
/* Link the node. */
link_to_pool(p, base);
base->total++;
inetpeer: RCU conversion inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 16:23:14 +08:00
}
spin_unlock_bh(&base->lock);
if (base->total >= inet_peer_threshold)
/* Remove one less-recently-used entry. */
cleanup_once(0);
return p;
}
static int compute_total(void)
{
return v4_peers.total;
}
/* Called with local BH disabled. */
static void peer_check_expire(unsigned long dummy)
{
unsigned long now = jiffies;
int ttl, total;
total = compute_total();
if (total >= inet_peer_threshold)
ttl = inet_peer_minttl;
else
ttl = inet_peer_maxttl
- (inet_peer_maxttl - inet_peer_minttl) / HZ *
total / inet_peer_threshold * HZ;
while (!cleanup_once(ttl)) {
if (jiffies != now)
break;
}
/* Trigger the timer after inet_peer_gc_mintime .. inet_peer_gc_maxtime
* interval depending on the total number of entries (more entries,
* less interval). */
total = compute_total();
if (total >= inet_peer_threshold)
peer_periodic_timer.expires = jiffies + inet_peer_gc_mintime;
else
peer_periodic_timer.expires = jiffies
+ inet_peer_gc_maxtime
- (inet_peer_gc_maxtime - inet_peer_gc_mintime) / HZ *
total / inet_peer_threshold * HZ;
add_timer(&peer_periodic_timer);
}
void inet_putpeer(struct inet_peer *p)
{
local_bh_disable();
if (atomic_dec_and_lock(&p->refcnt, &unused_peers.lock)) {
list_add_tail(&p->unused, &unused_peers.list);
p->dtime = (__u32)jiffies;
spin_unlock(&unused_peers.lock);
}
local_bh_enable();
}