openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/x86/Kconfig.cpu

390 lines
12 KiB
Plaintext
Raw Normal View History

[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
# Put here option for CPU selection and depending optimization
if !X86_ELAN
choice
prompt "Processor family"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
default M686 if X86_32
default GENERIC_CPU if X86_64
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
config M386
bool "386"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32 && !UML
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
---help---
This is the processor type of your CPU. This information is used for
optimizing purposes. In order to compile a kernel that can run on
all x86 CPU types (albeit not optimally fast), you can specify
"386" here.
The kernel will not necessarily run on earlier architectures than
the one you have chosen, e.g. a Pentium optimized kernel will run on
a PPro, but not necessarily on a i486.
Here are the settings recommended for greatest speed:
- "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels
will run on a 386 class machine.
- "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
- "586" for generic Pentium CPUs lacking the TSC
(time stamp counter) register.
- "Pentium-Classic" for the Intel Pentium.
- "Pentium-MMX" for the Intel Pentium MMX.
- "Pentium-Pro" for the Intel Pentium Pro.
- "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
- "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
- "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
- "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
- "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
- "Crusoe" for the Transmeta Crusoe series.
- "Efficeon" for the Transmeta Efficeon series.
- "Winchip-C6" for original IDT Winchip.
- "Winchip-2" for IDT Winchip 2.
- "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
- "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
[PATCH] Base support for AMD Geode GX/LX processors Provide basic support for the AMD Geode GX and LX processors. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:12:14 +08:00
- "Geode GX/LX" For AMD Geode GX and LX processors.
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
- "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
i386: Trivial typo fixes Trivial typo fixes in Kconfig files (i386). Signed-off-by: Egry Gabor <gaboregry@t-online.hu> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-27 00:47:15 +08:00
- "VIA C3-2" for VIA C3-2 "Nehemiah" (model 9 and above).
[PATCH] i386: Add an option for the VIA C7 which sets appropriate L1 cache The VIA C7 is a 686 (with TSC) that supports MMX, SSE and SSE2, it also has a cache line length of 64 according to http://www.digit-life.com/articles2/cpu/rmma-via-c7.html. This patch sets gcc to -march=686 and select s the correct cache shift. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-03 01:27:05 +08:00
- "VIA C7" for VIA C7.
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
If you don't know what to do, choose "386".
config M486
bool "486"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for a 486 series processor, either Intel or one of the
compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX,
DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
U5S.
config M586
bool "586/K5/5x86/6x86/6x86MX"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for an 586 or 686 series processor such as the AMD K5,
the Cyrix 5x86, 6x86 and 6x86MX. This choice does not
assume the RDTSC (Read Time Stamp Counter) instruction.
config M586TSC
bool "Pentium-Classic"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for a Pentium Classic processor with the RDTSC (Read
Time Stamp Counter) instruction for benchmarking.
config M586MMX
bool "Pentium-MMX"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for a Pentium with the MMX graphics/multimedia
extended instructions.
config M686
bool "Pentium-Pro"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for Intel Pentium Pro chips. This enables the use of
Pentium Pro extended instructions, and disables the init-time guard
against the f00f bug found in earlier Pentiums.
config MPENTIUMII
bool "Pentium-II/Celeron(pre-Coppermine)"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for Intel chips based on the Pentium-II and
pre-Coppermine Celeron core. This option enables an unaligned
copy optimization, compiles the kernel with optimization flags
tailored for the chip, and applies any applicable Pentium Pro
optimizations.
config MPENTIUMIII
bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for Intel chips based on the Pentium-III and
Celeron-Coppermine core. This option enables use of some
extended prefetch instructions in addition to the Pentium II
extensions.
config MPENTIUMM
bool "Pentium M"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for Intel Pentium M (not Pentium-4 M)
notebook chips.
config MPENTIUM4
[PATCH] i386: Add support for compilation for Core2 gcc doesn't support -mtune=core2 yet, but will be soon. Use -mtune=generic or -mtune=i686 as fallback TBD need benchmarking for INTEL_USERCOPY etc. So far I used the same defaults as MPENTIUMM Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07 09:14:09 +08:00
bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for Intel Pentium 4 chips. This includes the
x86: add cpu codenames for Kconfig.cpu add cpu core name for arch/i386/Kconfig.cpu:Pentium 4 sections help add Pentium D for arch/i386/Kconfig.cpu add Pentium D for arch/x86_64/Kconfig AK: Clarified some of the descriptions [ tglx: arch/x86 adaptation ] Signed-off-by: Oliver Pinter <oliver.pntr@gmail.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-18 00:04:36 +08:00
Pentium 4, Pentium D, P4-based Celeron and Xeon, and
Pentium-4 M (not Pentium M) chips. This option enables compile
flags optimized for the chip, uses the correct cache line size, and
applies any applicable optimizations.
CPUIDs: F[0-6][1-A] (in /proc/cpuinfo show = cpu family : 15 )
Select this for:
Pentiums (Pentium 4, Pentium D, Celeron, Celeron D) corename:
-Willamette
-Northwood
-Mobile Pentium 4
-Mobile Pentium 4 M
-Extreme Edition (Gallatin)
-Prescott
-Prescott 2M
-Cedar Mill
-Presler
-Smithfiled
Xeons (Intel Xeon, Xeon MP, Xeon LV, Xeon MV) corename:
-Foster
-Prestonia
-Gallatin
-Nocona
-Irwindale
-Cranford
-Potomac
-Paxville
-Dempsey
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
config MK6
bool "K6/K6-II/K6-III"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for an AMD K6-family processor. Enables use of
some extended instructions, and passes appropriate optimization
flags to GCC.
config MK7
bool "Athlon/Duron/K7"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for an AMD Athlon K7-family processor. Enables use of
some extended instructions, and passes appropriate optimization
flags to GCC.
config MK8
bool "Opteron/Athlon64/Hammer/K8"
help
Select this for an AMD Opteron or Athlon64 Hammer-family processor. Enables
use of some extended instructions, and passes appropriate optimization
flags to GCC.
config MCRUSOE
bool "Crusoe"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for a Transmeta Crusoe processor. Treats the processor
like a 586 with TSC, and sets some GCC optimization flags (like a
Pentium Pro with no alignment requirements).
config MEFFICEON
bool "Efficeon"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for a Transmeta Efficeon processor.
config MWINCHIPC6
bool "Winchip-C6"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for an IDT Winchip C6 chip. Linux and GCC
treat this chip as a 586TSC with some extended instructions
and alignment requirements.
config MWINCHIP2
bool "Winchip-2"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for an IDT Winchip-2. Linux and GCC
treat this chip as a 586TSC with some extended instructions
and alignment requirements.
config MWINCHIP3D
bool "Winchip-2A/Winchip-3"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for an IDT Winchip-2A or 3. Linux and GCC
treat this chip as a 586TSC with some extended instructions
Fix trivial typos in Kconfig* files Fix several typos in help text in Kconfig* files. Signed-off-by: David Sterba <dave@jikos.cz> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 13:12:20 +08:00
and alignment requirements. Also enable out of order memory
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
stores for this CPU, which can increase performance of some
operations.
config MGEODEGX1
bool "GeodeGX1"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for a Geode GX1 (Cyrix MediaGX) chip.
[PATCH] Base support for AMD Geode GX/LX processors Provide basic support for the AMD Geode GX and LX processors. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:12:14 +08:00
config MGEODE_LX
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
bool "Geode GX/LX"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
help
Select this for AMD Geode GX and LX processors.
[PATCH] Base support for AMD Geode GX/LX processors Provide basic support for the AMD Geode GX and LX processors. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:12:14 +08:00
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
config MCYRIXIII
bool "CyrixIII/VIA-C3"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for a Cyrix III or C3 chip. Presently Linux and GCC
treat this chip as a generic 586. Whilst the CPU is 686 class,
it lacks the cmov extension which gcc assumes is present when
generating 686 code.
Note that Nehemiah (Model 9) and above will not boot with this
kernel due to them lacking the 3DNow! instructions used in earlier
incarnations of the CPU.
config MVIAC3_2
bool "VIA C3-2 (Nehemiah)"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
help
Select this for a VIA C3 "Nehemiah". Selecting this enables usage
of SSE and tells gcc to treat the CPU as a 686.
Note, this kernel will not boot on older (pre model 9) C3s.
[PATCH] i386: Add an option for the VIA C7 which sets appropriate L1 cache The VIA C7 is a 686 (with TSC) that supports MMX, SSE and SSE2, it also has a cache line length of 64 according to http://www.digit-life.com/articles2/cpu/rmma-via-c7.html. This patch sets gcc to -march=686 and select s the correct cache shift. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-03 01:27:05 +08:00
config MVIAC7
bool "VIA C7"
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32
[PATCH] i386: Add an option for the VIA C7 which sets appropriate L1 cache The VIA C7 is a 686 (with TSC) that supports MMX, SSE and SSE2, it also has a cache line length of 64 according to http://www.digit-life.com/articles2/cpu/rmma-via-c7.html. This patch sets gcc to -march=686 and select s the correct cache shift. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-03 01:27:05 +08:00
help
Select this for a VIA C7. Selecting this uses the correct cache
shift and tells gcc to treat the CPU as a 686.
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
config MPSC
bool "Intel P4 / older Netburst based Xeon"
depends on X86_64
help
Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
Xeon CPUs with Intel 64bit which is compatible with x86-64.
Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
Netburst core and shouldn't use this option. You can distinguish them
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
using the cpu family field
in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one.
config MCORE2
bool "Core 2/newer Xeon"
help
Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
CPUs. You can distinguish newer from older Xeons by the CPU family
in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo)
config GENERIC_CPU
bool "Generic-x86-64"
depends on X86_64
help
Generic x86-64 CPU.
Run equally well on all x86-64 CPUs.
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
endchoice
config X86_GENERIC
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
bool "Generic x86 support"
depends on X86_32
help
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
Instead of just including optimizations for the selected
x86 variant (e.g. PII, Crusoe or Athlon), include some more
generic optimizations as well. This will make the kernel
perform better on x86 CPUs other than that selected.
This is really intended for distributors who need more
generic optimizations.
endif
#
# Define implied options from the CPU selection here
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
config X86_L1_CACHE_BYTES
int
default "128" if GENERIC_CPU || MPSC
default "64" if MK8 || MCORE2
depends on X86_64
config X86_INTERNODE_CACHE_BYTES
int
default "4096" if X86_VSMP
default X86_L1_CACHE_BYTES if !X86_VSMP
depends on X86_64
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
config X86_CMPXCHG
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
def_bool X86_64 || (X86_32 && !M386)
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
config X86_L1_CACHE_SHIFT
int
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
default "7" if MPENTIUM4 || X86_GENERIC || GENERIC_CPU || MPSC
[PATCH] Base support for AMD Geode GX/LX processors Provide basic support for the AMD Geode GX and LX processors. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:12:14 +08:00
default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
[PATCH] i386: Add an option for the VIA C7 which sets appropriate L1 cache The VIA C7 is a 686 (with TSC) that supports MMX, SSE and SSE2, it also has a cache line length of 64 according to http://www.digit-life.com/articles2/cpu/rmma-via-c7.html. This patch sets gcc to -march=686 and select s the correct cache shift. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-03 01:27:05 +08:00
default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
[PATCH] i386: Verify important CPUID bits in real mode Check some CPUID bits that are needed for compiler generated early in boot. When the system is still in real mode before changing the VESA BIOS mode it is possible to still display an visible error message on the screen. Similar to x86-64. Includes cleanups from Eric Biederman Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-03 01:27:20 +08:00
config X86_XADD
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
def_bool y
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32 && !M386
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
config X86_PPRO_FENCE
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
def_bool y
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
config X86_F00F_BUG
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
def_bool y
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
depends on M586MMX || M586TSC || M586 || M486 || M386
config X86_WP_WORKS_OK
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
def_bool y
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32 && !M386
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
config X86_INVLPG
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
def_bool y
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32 && !M386
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
config X86_BSWAP
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
def_bool y
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32 && !M386
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
config X86_POPAD_OK
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
def_bool y
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on X86_32 && !M386
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
config X86_ALIGNMENT_16
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
def_bool y
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
config X86_GOOD_APIC
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
def_bool y
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 || X86_64
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
config X86_INTEL_USERCOPY
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
def_bool y
[PATCH] i386: Add support for compilation for Core2 gcc doesn't support -mtune=core2 yet, but will be soon. Use -mtune=generic or -mtune=i686 as fallback TBD need benchmarking for INTEL_USERCOPY etc. So far I used the same defaults as MPENTIUMM Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07 09:14:09 +08:00
depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON || MCORE2
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
config X86_USE_PPRO_CHECKSUM
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
def_bool y
[PATCH] i386: Add support for compilation for Core2 gcc doesn't support -mtune=core2 yet, but will be soon. Use -mtune=generic or -mtune=i686 as fallback TBD need benchmarking for INTEL_USERCOPY etc. So far I used the same defaults as MPENTIUMM Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07 09:14:09 +08:00
depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
config X86_USE_3DNOW
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
def_bool y
[PATCH] uml: fix processor selection to exclude unsupported processors and features Makes UML compile on any possible processor choice. The two problems were: *) x86 code, when 386 is selected, checks at runtime boot_cpuflags, which we do not have. *) 3Dnow support for memcpy() et al. does not compile currently and fixing this is not trivial, so simply disable it; with this change, if one selects MK7 UML compiles (while it did not). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 16:21:35 +08:00
depends on (MCYRIXIII || MK7 || MGEODE_LX) && !UML
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
config X86_OOSTORE
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
def_bool y
[PATCH] uml: reuse i386 cpu-specific tuning Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:00:07 +08:00
depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
config X86_TSC
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
def_bool y
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64
[PATCH] i386: Verify important CPUID bits in real mode Check some CPUID bits that are needed for compiler generated early in boot. When the system is still in real mode before changing the VESA BIOS mode it is possible to still display an visible error message on the screen. Similar to x86-64. Includes cleanups from Eric Biederman Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-03 01:27:20 +08:00
# this should be set for all -march=.. options where the compiler
# generates cmov.
config X86_CMOV
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
def_bool y
[PATCH] i386: Verify important CPUID bits in real mode Check some CPUID bits that are needed for compiler generated early in boot. When the system is still in real mode before changing the VESA BIOS mode it is possible to still display an visible error message on the screen. Similar to x86-64. Includes cleanups from Eric Biederman Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-03 01:27:20 +08:00
depends on (MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7)
x86 Kconfig: change X86_MINIMUM_CPU_MODEL to X86_MINIMUM_CPU_FAMILY The X86_MINIMUM_CPU_MODEL name isn't really right, so change it to X86_MINIMUM_CPU_FAMILY. Also, the default minimum should be 3, not 0. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 03:18:30 +08:00
config X86_MINIMUM_CPU_FAMILY
[PATCH] i386: Verify important CPUID bits in real mode Check some CPUID bits that are needed for compiler generated early in boot. When the system is still in real mode before changing the VESA BIOS mode it is possible to still display an visible error message on the screen. Similar to x86-64. Includes cleanups from Eric Biederman Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-03 01:27:20 +08:00
int
x86: arch/x86/Kconfig.cpu unification Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-07 04:35:08 +08:00
default "64" if X86_64
default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK)
x86 Kconfig: change X86_MINIMUM_CPU_MODEL to X86_MINIMUM_CPU_FAMILY The X86_MINIMUM_CPU_MODEL name isn't really right, so change it to X86_MINIMUM_CPU_FAMILY. Also, the default minimum should be 3, not 0. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 03:18:30 +08:00
default "3"
[PATCH] i386: Verify important CPUID bits in real mode Check some CPUID bits that are needed for compiler generated early in boot. When the system is still in real mode before changing the VESA BIOS mode it is possible to still display an visible error message on the screen. Similar to x86-64. Includes cleanups from Eric Biederman Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-03 01:27:20 +08:00
x86: debugctlmsr kconfig This adds the (internal) Kconfig macro CONFIG_X86_DEBUGCTLMSR, to be defined when configuring to support only hardware that definitely supports MSR_IA32_DEBUGCTLMSR with the BTF flag. The Intel documentation says "P6 family" and later processors all have it. I think the Kconfig dependencies are right to have it set for those and unset for others (i.e., when 586 and earlier are supported). Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:30:54 +08:00
config X86_DEBUGCTLMSR
x86: use def_bool where possible in Kconfig.cpu x86: Use def_bool where possible in Kconfig.cpu Change occurances of: bool default X to: def_bool X Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:03 +08:00
def_bool y
x86: debugctlmsr kconfig This adds the (internal) Kconfig macro CONFIG_X86_DEBUGCTLMSR, to be defined when configuring to support only hardware that definitely supports MSR_IA32_DEBUGCTLMSR with the BTF flag. The Intel documentation says "P6 family" and later processors all have it. I think the Kconfig dependencies are right to have it set for those and unset for others (i.e., when 586 and earlier are supported). Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:30:54 +08:00
depends on !(M586MMX || M586TSC || M586 || M486 || M386)