linux/drivers/hid/hid-sony.c

1783 lines
65 KiB
C
Raw Normal View History

/*
* HID driver for Sony / PS2 / PS3 BD devices.
*
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
* Copyright (c) 2008 Jiri Slaby
* Copyright (c) 2012 David Dillow <dave@thedillows.org>
* Copyright (c) 2006-2013 Jiri Kosina
* Copyright (c) 2013 Colin Leitner <colin.leitner@gmail.com>
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
/*
* NOTE: in order for the Sony PS3 BD Remote Control to be found by
* a Bluetooth host, the key combination Start+Enter has to be kept pressed
* for about 7 seconds with the Bluetooth Host Controller in discovering mode.
*
* There will be no PIN request from the device.
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/leds.h>
#include <linux/power_supply.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/input/mt.h>
#include "hid-ids.h"
#define VAIO_RDESC_CONSTANT BIT(0)
#define SIXAXIS_CONTROLLER_USB BIT(1)
#define SIXAXIS_CONTROLLER_BT BIT(2)
#define BUZZ_CONTROLLER BIT(3)
#define PS3REMOTE BIT(4)
#define DUALSHOCK4_CONTROLLER_USB BIT(5)
#define DUALSHOCK4_CONTROLLER_BT BIT(6)
#define SIXAXIS_CONTROLLER (SIXAXIS_CONTROLLER_USB | SIXAXIS_CONTROLLER_BT)
#define DUALSHOCK4_CONTROLLER (DUALSHOCK4_CONTROLLER_USB |\
DUALSHOCK4_CONTROLLER_BT)
#define SONY_LED_SUPPORT (SIXAXIS_CONTROLLER | BUZZ_CONTROLLER |\
DUALSHOCK4_CONTROLLER)
#define SONY_BATTERY_SUPPORT (SIXAXIS_CONTROLLER | DUALSHOCK4_CONTROLLER)
#define SONY_FF_SUPPORT (SIXAXIS_CONTROLLER | DUALSHOCK4_CONTROLLER)
#define MAX_LEDS 4
static const u8 sixaxis_rdesc_fixup[] = {
0x95, 0x13, 0x09, 0x01, 0x81, 0x02, 0x95, 0x0C,
0x81, 0x01, 0x75, 0x10, 0x95, 0x04, 0x26, 0xFF,
0x03, 0x46, 0xFF, 0x03, 0x09, 0x01, 0x81, 0x02
};
HID: hid-sony: fix troubles with Sony remote clones There are some Sony clone gamepads that are incompatible with PS3 since firmware 3.50, as they decided to prevent those devices to work, without any good technical reason. I was one of those 'blessed' people affected by their niceness with their customers. Marcelo also has another device with a similar problem. Perhaps due to Sony's way to block the device, damaging the device's eeprom, or perhaps because they just have a different, broken Report descriptor, there are 3 buttons that don't work on both devices (the ones equivalent to square, round and X). What it happens is that the descriptor generate weird EV_ABS events to those buttons, instead of EV_MSC/EV_KEY. A fix that seems to be enough for them is to return the original sixaxis table instead of the broken one. That's what this patch does. Yet, there are some missing entries at the used keytable. On my tests, all keys are now producing the right events, but the reported keycodes look weird: "square" key: (Button.0010 = 1) 1355524363.460835: event type EV_MSC(0x04): scancode = 0x90010 1355524363.460835: event type EV_KEY(0x01) key_up: BTN_DEAD(0x0001) "round" key: (Button.000e = 1) 1355524410.908705: event type EV_MSC(0x04): scancode = 0x9000e 1355524410.908705: event type EV_KEY(0x01) key_down: (0x0001) 1355524410.971788: event type EV_MSC(0x04): scancode = 0x9000e 1355524410.971788: event type EV_KEY(0x01) key_up: (0x0001) "X" key: (Button.000f = 1) 1355524384.880813: event type EV_MSC(0x04): scancode = 0x9000f 1355524384.880813: event type EV_KEY(0x01) key_down: (0x0001) 1355524384.979815: event type EV_MSC(0x04): scancode = 0x9000f 1355524384.979815: event type EV_KEY(0x01) key_up: (0x0001) The rationale is likely due to those entries at rdesc table, where the Kernel were not likely able to parse: Button.000d ---> Key.? Button.000e ---> Key.? Button.000f ---> Key.? Button.0010 ---> Key.BtnDead Button.0011 ---> Key.? Button.0012 ---> Key.? Button.0013 ---> Key.? As a reference, this is the rdisc used on my clone (a Mad Catz model 8846): 05 01 09 04 a1 01 a1 02 85 01 75 08 95 01 15 00 26 ff 00 81 03 75 01 95 0d 15 00 25 01 35 00 45 01 05 09 19 01 29 0d 81 02 75 01 95 03 06 00 ff 81 03 05 01 25 07 46 3b 01 75 04 95 01 65 14 09 39 81 42 65 00 75 01 95 0c 06 00 ff 81 03 15 00 26 ff 00 05 01 09 01 a1 00 75 08 95 04 15 00 15 00 15 00 35 00 35 00 46 ff 00 09 30 09 31 09 32 09 35 81 02 c0 05 01 75 08 95 27 09 01 81 02 75 08 95 30 09 01 91 02 75 08 95 30 09 01 b1 02 c0 a1 02 85 02 75 08 95 30 09 01 b1 02 c0 a1 02 85 ee 75 08 95 30 09 01 b1 02 c0 a1 02 85 ef 75 08 95 30 09 01 b1 02 c0 c0 This is what's returned on Marcelo's device (not sure what is the brand name of his device): 05 01 09 04 a1 01 a1 02 85 01 75 08 95 01 15 00 26 ff 00 81 03 75 01 95 13 15 00 25 01 35 00 45 01 05 09 19 01 29 13 81 02 75 01 95 0d 06 00 ff 81 03 15 00 26 ff 00 05 01 09 01 a1 00 75 08 95 04 35 00 46 ff 00 09 30 09 31 09 32 09 35 81 02 c0 05 01 95 13 09 01 81 02 95 0c 81 01 75 10 95 04 26 ff 03 46 ff 03 09 01 81 02 c0 a1 02 85 02 75 08 95 30 09 01 b1 02 c0 a1 02 85 ee 75 08 95 30 09 01 b1 02 c0 a1 02 85 ef 75 08 95 30 09 01 b1 02 c0 c0 Reported-by: Marcelo Leitner <mleitner@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Tested-by: Marcelo Leitner <mleitner@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-15 06:57:34 +08:00
static const u8 sixaxis_rdesc_fixup2[] = {
0x05, 0x01, 0x09, 0x04, 0xa1, 0x01, 0xa1, 0x02,
0x85, 0x01, 0x75, 0x08, 0x95, 0x01, 0x15, 0x00,
0x26, 0xff, 0x00, 0x81, 0x03, 0x75, 0x01, 0x95,
0x13, 0x15, 0x00, 0x25, 0x01, 0x35, 0x00, 0x45,
0x01, 0x05, 0x09, 0x19, 0x01, 0x29, 0x13, 0x81,
0x02, 0x75, 0x01, 0x95, 0x0d, 0x06, 0x00, 0xff,
0x81, 0x03, 0x15, 0x00, 0x26, 0xff, 0x00, 0x05,
0x01, 0x09, 0x01, 0xa1, 0x00, 0x75, 0x08, 0x95,
0x04, 0x35, 0x00, 0x46, 0xff, 0x00, 0x09, 0x30,
0x09, 0x31, 0x09, 0x32, 0x09, 0x35, 0x81, 0x02,
0xc0, 0x05, 0x01, 0x95, 0x13, 0x09, 0x01, 0x81,
0x02, 0x95, 0x0c, 0x81, 0x01, 0x75, 0x10, 0x95,
0x04, 0x26, 0xff, 0x03, 0x46, 0xff, 0x03, 0x09,
0x01, 0x81, 0x02, 0xc0, 0xa1, 0x02, 0x85, 0x02,
0x75, 0x08, 0x95, 0x30, 0x09, 0x01, 0xb1, 0x02,
0xc0, 0xa1, 0x02, 0x85, 0xee, 0x75, 0x08, 0x95,
0x30, 0x09, 0x01, 0xb1, 0x02, 0xc0, 0xa1, 0x02,
0x85, 0xef, 0x75, 0x08, 0x95, 0x30, 0x09, 0x01,
0xb1, 0x02, 0xc0, 0xc0,
};
/*
* The default descriptor doesn't provide mapping for the accelerometers
* or orientation sensors. This fixed descriptor maps the accelerometers
* to usage values 0x40, 0x41 and 0x42 and maps the orientation sensors
* to usage values 0x43, 0x44 and 0x45.
*/
static u8 dualshock4_usb_rdesc[] = {
0x05, 0x01, /* Usage Page (Desktop), */
0x09, 0x05, /* Usage (Gamepad), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x01, /* Report ID (1), */
0x09, 0x30, /* Usage (X), */
0x09, 0x31, /* Usage (Y), */
0x09, 0x32, /* Usage (Z), */
0x09, 0x35, /* Usage (Rz), */
0x15, 0x00, /* Logical Minimum (0), */
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
0x75, 0x08, /* Report Size (8), */
0x95, 0x04, /* Report Count (4), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x39, /* Usage (Hat Switch), */
0x15, 0x00, /* Logical Minimum (0), */
0x25, 0x07, /* Logical Maximum (7), */
0x35, 0x00, /* Physical Minimum (0), */
0x46, 0x3B, 0x01, /* Physical Maximum (315), */
0x65, 0x14, /* Unit (Degrees), */
0x75, 0x04, /* Report Size (4), */
0x95, 0x01, /* Report Count (1), */
0x81, 0x42, /* Input (Variable, Null State), */
0x65, 0x00, /* Unit, */
0x05, 0x09, /* Usage Page (Button), */
0x19, 0x01, /* Usage Minimum (01h), */
0x29, 0x0E, /* Usage Maximum (0Eh), */
0x15, 0x00, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x75, 0x01, /* Report Size (1), */
0x95, 0x0E, /* Report Count (14), */
0x81, 0x02, /* Input (Variable), */
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
0x09, 0x20, /* Usage (20h), */
0x75, 0x06, /* Report Size (6), */
0x95, 0x01, /* Report Count (1), */
0x15, 0x00, /* Logical Minimum (0), */
0x25, 0x7F, /* Logical Maximum (127), */
0x81, 0x02, /* Input (Variable), */
0x05, 0x01, /* Usage Page (Desktop), */
0x09, 0x33, /* Usage (Rx), */
0x09, 0x34, /* Usage (Ry), */
0x15, 0x00, /* Logical Minimum (0), */
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
0x75, 0x08, /* Report Size (8), */
0x95, 0x02, /* Report Count (2), */
0x81, 0x02, /* Input (Variable), */
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
0x09, 0x21, /* Usage (21h), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x02, /* Input (Variable), */
0x05, 0x01, /* Usage Page (Desktop), */
0x19, 0x40, /* Usage Minimum (40h), */
0x29, 0x42, /* Usage Maximum (42h), */
0x16, 0x00, 0x80, /* Logical Minimum (-32768), */
0x26, 0x00, 0x7F, /* Logical Maximum (32767), */
0x75, 0x10, /* Report Size (16), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x02, /* Input (Variable), */
0x19, 0x43, /* Usage Minimum (43h), */
0x29, 0x45, /* Usage Maximum (45h), */
0x16, 0xFF, 0xBF, /* Logical Minimum (-16385), */
0x26, 0x00, 0x40, /* Logical Maximum (16384), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x02, /* Input (Variable), */
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
0x09, 0x21, /* Usage (21h), */
0x15, 0x00, /* Logical Minimum (0), */
0x25, 0xFF, /* Logical Maximum (255), */
0x75, 0x08, /* Report Size (8), */
0x95, 0x27, /* Report Count (39), */
0x81, 0x02, /* Input (Variable), */
0x85, 0x05, /* Report ID (5), */
0x09, 0x22, /* Usage (22h), */
0x95, 0x1F, /* Report Count (31), */
0x91, 0x02, /* Output (Variable), */
0x85, 0x04, /* Report ID (4), */
0x09, 0x23, /* Usage (23h), */
0x95, 0x24, /* Report Count (36), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x02, /* Report ID (2), */
0x09, 0x24, /* Usage (24h), */
0x95, 0x24, /* Report Count (36), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x08, /* Report ID (8), */
0x09, 0x25, /* Usage (25h), */
0x95, 0x03, /* Report Count (3), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x10, /* Report ID (16), */
0x09, 0x26, /* Usage (26h), */
0x95, 0x04, /* Report Count (4), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x11, /* Report ID (17), */
0x09, 0x27, /* Usage (27h), */
0x95, 0x02, /* Report Count (2), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x12, /* Report ID (18), */
0x06, 0x02, 0xFF, /* Usage Page (FF02h), */
0x09, 0x21, /* Usage (21h), */
0x95, 0x0F, /* Report Count (15), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x13, /* Report ID (19), */
0x09, 0x22, /* Usage (22h), */
0x95, 0x16, /* Report Count (22), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x14, /* Report ID (20), */
0x06, 0x05, 0xFF, /* Usage Page (FF05h), */
0x09, 0x20, /* Usage (20h), */
0x95, 0x10, /* Report Count (16), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x15, /* Report ID (21), */
0x09, 0x21, /* Usage (21h), */
0x95, 0x2C, /* Report Count (44), */
0xB1, 0x02, /* Feature (Variable), */
0x06, 0x80, 0xFF, /* Usage Page (FF80h), */
0x85, 0x80, /* Report ID (128), */
0x09, 0x20, /* Usage (20h), */
0x95, 0x06, /* Report Count (6), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x81, /* Report ID (129), */
0x09, 0x21, /* Usage (21h), */
0x95, 0x06, /* Report Count (6), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x82, /* Report ID (130), */
0x09, 0x22, /* Usage (22h), */
0x95, 0x05, /* Report Count (5), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x83, /* Report ID (131), */
0x09, 0x23, /* Usage (23h), */
0x95, 0x01, /* Report Count (1), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x84, /* Report ID (132), */
0x09, 0x24, /* Usage (24h), */
0x95, 0x04, /* Report Count (4), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x85, /* Report ID (133), */
0x09, 0x25, /* Usage (25h), */
0x95, 0x06, /* Report Count (6), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x86, /* Report ID (134), */
0x09, 0x26, /* Usage (26h), */
0x95, 0x06, /* Report Count (6), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x87, /* Report ID (135), */
0x09, 0x27, /* Usage (27h), */
0x95, 0x23, /* Report Count (35), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x88, /* Report ID (136), */
0x09, 0x28, /* Usage (28h), */
0x95, 0x22, /* Report Count (34), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x89, /* Report ID (137), */
0x09, 0x29, /* Usage (29h), */
0x95, 0x02, /* Report Count (2), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x90, /* Report ID (144), */
0x09, 0x30, /* Usage (30h), */
0x95, 0x05, /* Report Count (5), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x91, /* Report ID (145), */
0x09, 0x31, /* Usage (31h), */
0x95, 0x03, /* Report Count (3), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x92, /* Report ID (146), */
0x09, 0x32, /* Usage (32h), */
0x95, 0x03, /* Report Count (3), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x93, /* Report ID (147), */
0x09, 0x33, /* Usage (33h), */
0x95, 0x0C, /* Report Count (12), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA0, /* Report ID (160), */
0x09, 0x40, /* Usage (40h), */
0x95, 0x06, /* Report Count (6), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA1, /* Report ID (161), */
0x09, 0x41, /* Usage (41h), */
0x95, 0x01, /* Report Count (1), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA2, /* Report ID (162), */
0x09, 0x42, /* Usage (42h), */
0x95, 0x01, /* Report Count (1), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA3, /* Report ID (163), */
0x09, 0x43, /* Usage (43h), */
0x95, 0x30, /* Report Count (48), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA4, /* Report ID (164), */
0x09, 0x44, /* Usage (44h), */
0x95, 0x0D, /* Report Count (13), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA5, /* Report ID (165), */
0x09, 0x45, /* Usage (45h), */
0x95, 0x15, /* Report Count (21), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA6, /* Report ID (166), */
0x09, 0x46, /* Usage (46h), */
0x95, 0x15, /* Report Count (21), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xF0, /* Report ID (240), */
0x09, 0x47, /* Usage (47h), */
0x95, 0x3F, /* Report Count (63), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xF1, /* Report ID (241), */
0x09, 0x48, /* Usage (48h), */
0x95, 0x3F, /* Report Count (63), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xF2, /* Report ID (242), */
0x09, 0x49, /* Usage (49h), */
0x95, 0x0F, /* Report Count (15), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA7, /* Report ID (167), */
0x09, 0x4A, /* Usage (4Ah), */
0x95, 0x01, /* Report Count (1), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA8, /* Report ID (168), */
0x09, 0x4B, /* Usage (4Bh), */
0x95, 0x01, /* Report Count (1), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA9, /* Report ID (169), */
0x09, 0x4C, /* Usage (4Ch), */
0x95, 0x08, /* Report Count (8), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xAA, /* Report ID (170), */
0x09, 0x4E, /* Usage (4Eh), */
0x95, 0x01, /* Report Count (1), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xAB, /* Report ID (171), */
0x09, 0x4F, /* Usage (4Fh), */
0x95, 0x39, /* Report Count (57), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xAC, /* Report ID (172), */
0x09, 0x50, /* Usage (50h), */
0x95, 0x39, /* Report Count (57), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xAD, /* Report ID (173), */
0x09, 0x51, /* Usage (51h), */
0x95, 0x0B, /* Report Count (11), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xAE, /* Report ID (174), */
0x09, 0x52, /* Usage (52h), */
0x95, 0x01, /* Report Count (1), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xAF, /* Report ID (175), */
0x09, 0x53, /* Usage (53h), */
0x95, 0x02, /* Report Count (2), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xB0, /* Report ID (176), */
0x09, 0x54, /* Usage (54h), */
0x95, 0x3F, /* Report Count (63), */
0xB1, 0x02, /* Feature (Variable), */
0xC0 /* End Collection */
};
/*
* The default behavior of the Dualshock 4 is to send reports using report
* type 1 when running over Bluetooth. However, as soon as it receives a
* report of type 17 to set the LEDs or rumble it starts returning it's state
* in report 17 instead of 1. Since report 17 is undefined in the default HID
* descriptor the button and axis definitions must be moved to report 17 or
* the HID layer won't process the received input once a report is sent.
*/
static u8 dualshock4_bt_rdesc[] = {
0x05, 0x01, /* Usage Page (Desktop), */
0x09, 0x05, /* Usage (Gamepad), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x01, /* Report ID (1), */
0x75, 0x08, /* Report Size (8), */
0x95, 0x0A, /* Report Count (9), */
0x81, 0x02, /* Input (Variable), */
0x06, 0x04, 0xFF, /* Usage Page (FF04h), */
0x85, 0x02, /* Report ID (2), */
0x09, 0x24, /* Usage (24h), */
0x95, 0x24, /* Report Count (36), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA3, /* Report ID (163), */
0x09, 0x25, /* Usage (25h), */
0x95, 0x30, /* Report Count (48), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x05, /* Report ID (5), */
0x09, 0x26, /* Usage (26h), */
0x95, 0x28, /* Report Count (40), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x06, /* Report ID (6), */
0x09, 0x27, /* Usage (27h), */
0x95, 0x34, /* Report Count (52), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x07, /* Report ID (7), */
0x09, 0x28, /* Usage (28h), */
0x95, 0x30, /* Report Count (48), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x08, /* Report ID (8), */
0x09, 0x29, /* Usage (29h), */
0x95, 0x2F, /* Report Count (47), */
0xB1, 0x02, /* Feature (Variable), */
0x06, 0x03, 0xFF, /* Usage Page (FF03h), */
0x85, 0x03, /* Report ID (3), */
0x09, 0x21, /* Usage (21h), */
0x95, 0x26, /* Report Count (38), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x04, /* Report ID (4), */
0x09, 0x22, /* Usage (22h), */
0x95, 0x2E, /* Report Count (46), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xF0, /* Report ID (240), */
0x09, 0x47, /* Usage (47h), */
0x95, 0x3F, /* Report Count (63), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xF1, /* Report ID (241), */
0x09, 0x48, /* Usage (48h), */
0x95, 0x3F, /* Report Count (63), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xF2, /* Report ID (242), */
0x09, 0x49, /* Usage (49h), */
0x95, 0x0F, /* Report Count (15), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x11, /* Report ID (17), */
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
0x09, 0x20, /* Usage (20h), */
0x95, 0x02, /* Report Count (2), */
0x81, 0x02, /* Input (Variable), */
0x05, 0x01, /* Usage Page (Desktop), */
0x09, 0x30, /* Usage (X), */
0x09, 0x31, /* Usage (Y), */
0x09, 0x32, /* Usage (Z), */
0x09, 0x35, /* Usage (Rz), */
0x15, 0x00, /* Logical Minimum (0), */
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
0x75, 0x08, /* Report Size (8), */
0x95, 0x04, /* Report Count (4), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x39, /* Usage (Hat Switch), */
0x15, 0x00, /* Logical Minimum (0), */
0x25, 0x07, /* Logical Maximum (7), */
0x75, 0x04, /* Report Size (4), */
0x95, 0x01, /* Report Count (1), */
0x81, 0x42, /* Input (Variable, Null State), */
0x05, 0x09, /* Usage Page (Button), */
0x19, 0x01, /* Usage Minimum (01h), */
0x29, 0x0E, /* Usage Maximum (0Eh), */
0x15, 0x00, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x75, 0x01, /* Report Size (1), */
0x95, 0x0E, /* Report Count (14), */
0x81, 0x02, /* Input (Variable), */
0x75, 0x06, /* Report Size (6), */
0x95, 0x01, /* Report Count (1), */
0x81, 0x01, /* Input (Constant), */
0x05, 0x01, /* Usage Page (Desktop), */
0x09, 0x33, /* Usage (Rx), */
0x09, 0x34, /* Usage (Ry), */
0x15, 0x00, /* Logical Minimum (0), */
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
0x75, 0x08, /* Report Size (8), */
0x95, 0x02, /* Report Count (2), */
0x81, 0x02, /* Input (Variable), */
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
0x09, 0x20, /* Usage (20h), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x02, /* Input (Variable), */
0x05, 0x01, /* Usage Page (Desktop), */
0x19, 0x40, /* Usage Minimum (40h), */
0x29, 0x42, /* Usage Maximum (42h), */
0x16, 0x00, 0x80, /* Logical Minimum (-32768), */
0x26, 0x00, 0x7F, /* Logical Maximum (32767), */
0x75, 0x10, /* Report Size (16), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x02, /* Input (Variable), */
0x19, 0x43, /* Usage Minimum (43h), */
0x29, 0x45, /* Usage Maximum (45h), */
0x16, 0xFF, 0xBF, /* Logical Minimum (-16385), */
0x26, 0x00, 0x40, /* Logical Maximum (16384), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x02, /* Input (Variable), */
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
0x09, 0x20, /* Usage (20h), */
0x15, 0x00, /* Logical Minimum (0), */
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
0x75, 0x08, /* Report Size (8), */
0x95, 0x31, /* Report Count (51), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x21, /* Usage (21h), */
0x75, 0x08, /* Report Size (8), */
0x95, 0x4D, /* Report Count (77), */
0x91, 0x02, /* Output (Variable), */
0x85, 0x12, /* Report ID (18), */
0x09, 0x22, /* Usage (22h), */
0x95, 0x8D, /* Report Count (141), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x23, /* Usage (23h), */
0x91, 0x02, /* Output (Variable), */
0x85, 0x13, /* Report ID (19), */
0x09, 0x24, /* Usage (24h), */
0x95, 0xCD, /* Report Count (205), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x25, /* Usage (25h), */
0x91, 0x02, /* Output (Variable), */
0x85, 0x14, /* Report ID (20), */
0x09, 0x26, /* Usage (26h), */
0x96, 0x0D, 0x01, /* Report Count (269), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x27, /* Usage (27h), */
0x91, 0x02, /* Output (Variable), */
0x85, 0x15, /* Report ID (21), */
0x09, 0x28, /* Usage (28h), */
0x96, 0x4D, 0x01, /* Report Count (333), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x29, /* Usage (29h), */
0x91, 0x02, /* Output (Variable), */
0x85, 0x16, /* Report ID (22), */
0x09, 0x2A, /* Usage (2Ah), */
0x96, 0x8D, 0x01, /* Report Count (397), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x2B, /* Usage (2Bh), */
0x91, 0x02, /* Output (Variable), */
0x85, 0x17, /* Report ID (23), */
0x09, 0x2C, /* Usage (2Ch), */
0x96, 0xCD, 0x01, /* Report Count (461), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x2D, /* Usage (2Dh), */
0x91, 0x02, /* Output (Variable), */
0x85, 0x18, /* Report ID (24), */
0x09, 0x2E, /* Usage (2Eh), */
0x96, 0x0D, 0x02, /* Report Count (525), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x2F, /* Usage (2Fh), */
0x91, 0x02, /* Output (Variable), */
0x85, 0x19, /* Report ID (25), */
0x09, 0x30, /* Usage (30h), */
0x96, 0x22, 0x02, /* Report Count (546), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x31, /* Usage (31h), */
0x91, 0x02, /* Output (Variable), */
0x06, 0x80, 0xFF, /* Usage Page (FF80h), */
0x85, 0x82, /* Report ID (130), */
0x09, 0x22, /* Usage (22h), */
0x95, 0x3F, /* Report Count (63), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x83, /* Report ID (131), */
0x09, 0x23, /* Usage (23h), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x84, /* Report ID (132), */
0x09, 0x24, /* Usage (24h), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x90, /* Report ID (144), */
0x09, 0x30, /* Usage (30h), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x91, /* Report ID (145), */
0x09, 0x31, /* Usage (31h), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x92, /* Report ID (146), */
0x09, 0x32, /* Usage (32h), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x93, /* Report ID (147), */
0x09, 0x33, /* Usage (33h), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA0, /* Report ID (160), */
0x09, 0x40, /* Usage (40h), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA4, /* Report ID (164), */
0x09, 0x44, /* Usage (44h), */
0xB1, 0x02, /* Feature (Variable), */
0xC0 /* End Collection */
};
static __u8 ps3remote_rdesc[] = {
0x05, 0x01, /* GUsagePage Generic Desktop */
0x09, 0x05, /* LUsage 0x05 [Game Pad] */
0xA1, 0x01, /* MCollection Application (mouse, keyboard) */
/* Use collection 1 for joypad buttons */
0xA1, 0x02, /* MCollection Logical (interrelated data) */
/* Ignore the 1st byte, maybe it is used for a controller
* number but it's not needed for correct operation */
0x75, 0x08, /* GReportSize 0x08 [8] */
0x95, 0x01, /* GReportCount 0x01 [1] */
0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */
/* Bytes from 2nd to 4th are a bitmap for joypad buttons, for these
* buttons multiple keypresses are allowed */
0x05, 0x09, /* GUsagePage Button */
0x19, 0x01, /* LUsageMinimum 0x01 [Button 1 (primary/trigger)] */
0x29, 0x18, /* LUsageMaximum 0x18 [Button 24] */
0x14, /* GLogicalMinimum [0] */
0x25, 0x01, /* GLogicalMaximum 0x01 [1] */
0x75, 0x01, /* GReportSize 0x01 [1] */
0x95, 0x18, /* GReportCount 0x18 [24] */
0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */
0xC0, /* MEndCollection */
/* Use collection 2 for remote control buttons */
0xA1, 0x02, /* MCollection Logical (interrelated data) */
/* 5th byte is used for remote control buttons */
0x05, 0x09, /* GUsagePage Button */
0x18, /* LUsageMinimum [No button pressed] */
0x29, 0xFE, /* LUsageMaximum 0xFE [Button 254] */
0x14, /* GLogicalMinimum [0] */
0x26, 0xFE, 0x00, /* GLogicalMaximum 0x00FE [254] */
0x75, 0x08, /* GReportSize 0x08 [8] */
0x95, 0x01, /* GReportCount 0x01 [1] */
0x80, /* MInput */
/* Ignore bytes from 6th to 11th, 6th to 10th are always constant at
* 0xff and 11th is for press indication */
0x75, 0x08, /* GReportSize 0x08 [8] */
0x95, 0x06, /* GReportCount 0x06 [6] */
0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */
/* 12th byte is for battery strength */
0x05, 0x06, /* GUsagePage Generic Device Controls */
0x09, 0x20, /* LUsage 0x20 [Battery Strength] */
0x14, /* GLogicalMinimum [0] */
0x25, 0x05, /* GLogicalMaximum 0x05 [5] */
0x75, 0x08, /* GReportSize 0x08 [8] */
0x95, 0x01, /* GReportCount 0x01 [1] */
0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */
0xC0, /* MEndCollection */
0xC0 /* MEndCollection [Game Pad] */
};
static const unsigned int ps3remote_keymap_joypad_buttons[] = {
[0x01] = KEY_SELECT,
[0x02] = BTN_THUMBL, /* L3 */
[0x03] = BTN_THUMBR, /* R3 */
[0x04] = BTN_START,
[0x05] = KEY_UP,
[0x06] = KEY_RIGHT,
[0x07] = KEY_DOWN,
[0x08] = KEY_LEFT,
[0x09] = BTN_TL2, /* L2 */
[0x0a] = BTN_TR2, /* R2 */
[0x0b] = BTN_TL, /* L1 */
[0x0c] = BTN_TR, /* R1 */
[0x0d] = KEY_OPTION, /* options/triangle */
[0x0e] = KEY_BACK, /* back/circle */
[0x0f] = BTN_0, /* cross */
[0x10] = KEY_SCREEN, /* view/square */
[0x11] = KEY_HOMEPAGE, /* PS button */
[0x14] = KEY_ENTER,
};
static const unsigned int ps3remote_keymap_remote_buttons[] = {
[0x00] = KEY_1,
[0x01] = KEY_2,
[0x02] = KEY_3,
[0x03] = KEY_4,
[0x04] = KEY_5,
[0x05] = KEY_6,
[0x06] = KEY_7,
[0x07] = KEY_8,
[0x08] = KEY_9,
[0x09] = KEY_0,
[0x0e] = KEY_ESC, /* return */
[0x0f] = KEY_CLEAR,
[0x16] = KEY_EJECTCD,
[0x1a] = KEY_MENU, /* top menu */
[0x28] = KEY_TIME,
[0x30] = KEY_PREVIOUS,
[0x31] = KEY_NEXT,
[0x32] = KEY_PLAY,
[0x33] = KEY_REWIND, /* scan back */
[0x34] = KEY_FORWARD, /* scan forward */
[0x38] = KEY_STOP,
[0x39] = KEY_PAUSE,
[0x40] = KEY_CONTEXT_MENU, /* pop up/menu */
[0x60] = KEY_FRAMEBACK, /* slow/step back */
[0x61] = KEY_FRAMEFORWARD, /* slow/step forward */
[0x63] = KEY_SUBTITLE,
[0x64] = KEY_AUDIO,
[0x65] = KEY_ANGLE,
[0x70] = KEY_INFO, /* display */
[0x80] = KEY_BLUE,
[0x81] = KEY_RED,
[0x82] = KEY_GREEN,
[0x83] = KEY_YELLOW,
};
static const unsigned int buzz_keymap[] = {
/*
* The controller has 4 remote buzzers, each with one LED and 5
* buttons.
*
* We use the mapping chosen by the controller, which is:
*
* Key Offset
* -------------------
* Buzz 1
* Blue 5
* Orange 4
* Green 3
* Yellow 2
*
* So, for example, the orange button on the third buzzer is mapped to
* BTN_TRIGGER_HAPPY14
*/
[ 1] = BTN_TRIGGER_HAPPY1,
[ 2] = BTN_TRIGGER_HAPPY2,
[ 3] = BTN_TRIGGER_HAPPY3,
[ 4] = BTN_TRIGGER_HAPPY4,
[ 5] = BTN_TRIGGER_HAPPY5,
[ 6] = BTN_TRIGGER_HAPPY6,
[ 7] = BTN_TRIGGER_HAPPY7,
[ 8] = BTN_TRIGGER_HAPPY8,
[ 9] = BTN_TRIGGER_HAPPY9,
[10] = BTN_TRIGGER_HAPPY10,
[11] = BTN_TRIGGER_HAPPY11,
[12] = BTN_TRIGGER_HAPPY12,
[13] = BTN_TRIGGER_HAPPY13,
[14] = BTN_TRIGGER_HAPPY14,
[15] = BTN_TRIGGER_HAPPY15,
[16] = BTN_TRIGGER_HAPPY16,
[17] = BTN_TRIGGER_HAPPY17,
[18] = BTN_TRIGGER_HAPPY18,
[19] = BTN_TRIGGER_HAPPY19,
[20] = BTN_TRIGGER_HAPPY20,
};
static enum power_supply_property sony_battery_props[] = {
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_SCOPE,
POWER_SUPPLY_PROP_STATUS,
};
static spinlock_t sony_dev_list_lock;
static LIST_HEAD(sony_device_list);
struct sony_sc {
spinlock_t lock;
struct list_head list_node;
struct hid_device *hdev;
struct led_classdev *leds[MAX_LEDS];
unsigned long quirks;
struct work_struct state_worker;
struct power_supply battery;
#ifdef CONFIG_SONY_FF
__u8 left;
__u8 right;
#endif
__u8 mac_address[6];
__u8 worker_initialized;
__u8 cable_state;
__u8 battery_charging;
__u8 battery_capacity;
__u8 led_state[MAX_LEDS];
__u8 led_count;
};
static __u8 *ps3remote_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
*rsize = sizeof(ps3remote_rdesc);
return ps3remote_rdesc;
}
static int ps3remote_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
unsigned int key = usage->hid & HID_USAGE;
if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON)
return -1;
switch (usage->collection_index) {
case 1:
if (key >= ARRAY_SIZE(ps3remote_keymap_joypad_buttons))
return -1;
key = ps3remote_keymap_joypad_buttons[key];
if (!key)
return -1;
break;
case 2:
if (key >= ARRAY_SIZE(ps3remote_keymap_remote_buttons))
return -1;
key = ps3remote_keymap_remote_buttons[key];
if (!key)
return -1;
break;
default:
return -1;
}
hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
return 1;
}
/* Sony Vaio VGX has wrongly mouse pointer declared as constant */
static __u8 *sony_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
struct sony_sc *sc = hid_get_drvdata(hdev);
/*
* Some Sony RF receivers wrongly declare the mouse pointer as a
* a constant non-data variable.
*/
if ((sc->quirks & VAIO_RDESC_CONSTANT) && *rsize >= 56 &&
/* usage page: generic desktop controls */
/* rdesc[0] == 0x05 && rdesc[1] == 0x01 && */
/* usage: mouse */
rdesc[2] == 0x09 && rdesc[3] == 0x02 &&
/* input (usage page for x,y axes): constant, variable, relative */
rdesc[54] == 0x81 && rdesc[55] == 0x07) {
HID: add support for Sony RF receiver with USB product id 0x0374 Some Vaio desktop computers, among them the VGC-LN51JGB multimedia PC, have a RF receiver, multi-interface USB device 054c:0374, that is used to connect a wireless keyboard and a wireless mouse. The keyboard works flawlessly, but the mouse (VGP-WMS3 in my case) does not seem to be generating any pointer events. The problem is that the mouse pointer is wrongly declared as a constant non-data variable in the report descriptor (see lsusb and usbhid-dump output below), with the consequence that it is ignored by the HID code. Add this device to the have-special-driver list and fix up the report descriptor in the Sony-specific driver which happens to already have a fixup for a similar firmware bug. # lsusb -vd 054C:0374 Bus 003 Device 002: ID 054c:0374 Sony Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x054c Sony Corp. idProduct 0x0374 iSerial 0 [...] Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 2 RF Receiver [...] Report Descriptor: (length is 100) [...] Item(Global): Usage Page, data= [ 0x01 ] 1 Generic Desktop Controls Item(Local ): Usage, data= [ 0x30 ] 48 Direction-X Item(Local ): Usage, data= [ 0x31 ] 49 Direction-Y Item(Global): Report Count, data= [ 0x02 ] 2 Item(Global): Report Size, data= [ 0x08 ] 8 Item(Global): Logical Minimum, data= [ 0x81 ] 129 Item(Global): Logical Maximum, data= [ 0x7f ] 127 Item(Main ): Input, data= [ 0x07 ] 7 Constant Variable Relative No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield # usbhid-dump 003:002:001:DESCRIPTOR 1357910009.758544 05 01 09 02 A1 01 05 01 09 02 A1 02 85 01 09 01 A1 00 05 09 19 01 29 05 95 05 75 01 15 00 25 01 81 02 75 03 95 01 81 01 05 01 09 30 09 31 95 02 75 08 15 81 25 7F 81 07 A1 02 85 01 09 38 35 00 45 00 15 81 25 7F 95 01 75 08 81 06 C0 A1 02 85 01 05 0C 15 81 25 7F 95 01 75 08 0A 38 02 81 06 C0 C0 C0 C0 Cc: linux-input@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-15 18:40:48 +08:00
hid_info(hdev, "Fixing up Sony RF Receiver report descriptor\n");
/* input: data, variable, relative */
rdesc[55] = 0x06;
}
/*
* The default Dualshock 4 USB descriptor doesn't assign
* the gyroscope values to corresponding axes so we need a
* modified one.
*/
if ((sc->quirks & DUALSHOCK4_CONTROLLER_USB) && *rsize == 467) {
hid_info(hdev, "Using modified Dualshock 4 report descriptor with gyroscope axes\n");
rdesc = dualshock4_usb_rdesc;
*rsize = sizeof(dualshock4_usb_rdesc);
} else if ((sc->quirks & DUALSHOCK4_CONTROLLER_BT) && *rsize == 357) {
hid_info(hdev, "Using modified Dualshock 4 Bluetooth report descriptor\n");
rdesc = dualshock4_bt_rdesc;
*rsize = sizeof(dualshock4_bt_rdesc);
}
/* The HID descriptor exposed over BT has a trailing zero byte */
if ((((sc->quirks & SIXAXIS_CONTROLLER_USB) && *rsize == 148) ||
((sc->quirks & SIXAXIS_CONTROLLER_BT) && *rsize == 149)) &&
rdesc[83] == 0x75) {
hid_info(hdev, "Fixing up Sony Sixaxis report descriptor\n");
memcpy((void *)&rdesc[83], (void *)&sixaxis_rdesc_fixup,
sizeof(sixaxis_rdesc_fixup));
HID: hid-sony: fix troubles with Sony remote clones There are some Sony clone gamepads that are incompatible with PS3 since firmware 3.50, as they decided to prevent those devices to work, without any good technical reason. I was one of those 'blessed' people affected by their niceness with their customers. Marcelo also has another device with a similar problem. Perhaps due to Sony's way to block the device, damaging the device's eeprom, or perhaps because they just have a different, broken Report descriptor, there are 3 buttons that don't work on both devices (the ones equivalent to square, round and X). What it happens is that the descriptor generate weird EV_ABS events to those buttons, instead of EV_MSC/EV_KEY. A fix that seems to be enough for them is to return the original sixaxis table instead of the broken one. That's what this patch does. Yet, there are some missing entries at the used keytable. On my tests, all keys are now producing the right events, but the reported keycodes look weird: "square" key: (Button.0010 = 1) 1355524363.460835: event type EV_MSC(0x04): scancode = 0x90010 1355524363.460835: event type EV_KEY(0x01) key_up: BTN_DEAD(0x0001) "round" key: (Button.000e = 1) 1355524410.908705: event type EV_MSC(0x04): scancode = 0x9000e 1355524410.908705: event type EV_KEY(0x01) key_down: (0x0001) 1355524410.971788: event type EV_MSC(0x04): scancode = 0x9000e 1355524410.971788: event type EV_KEY(0x01) key_up: (0x0001) "X" key: (Button.000f = 1) 1355524384.880813: event type EV_MSC(0x04): scancode = 0x9000f 1355524384.880813: event type EV_KEY(0x01) key_down: (0x0001) 1355524384.979815: event type EV_MSC(0x04): scancode = 0x9000f 1355524384.979815: event type EV_KEY(0x01) key_up: (0x0001) The rationale is likely due to those entries at rdesc table, where the Kernel were not likely able to parse: Button.000d ---> Key.? Button.000e ---> Key.? Button.000f ---> Key.? Button.0010 ---> Key.BtnDead Button.0011 ---> Key.? Button.0012 ---> Key.? Button.0013 ---> Key.? As a reference, this is the rdisc used on my clone (a Mad Catz model 8846): 05 01 09 04 a1 01 a1 02 85 01 75 08 95 01 15 00 26 ff 00 81 03 75 01 95 0d 15 00 25 01 35 00 45 01 05 09 19 01 29 0d 81 02 75 01 95 03 06 00 ff 81 03 05 01 25 07 46 3b 01 75 04 95 01 65 14 09 39 81 42 65 00 75 01 95 0c 06 00 ff 81 03 15 00 26 ff 00 05 01 09 01 a1 00 75 08 95 04 15 00 15 00 15 00 35 00 35 00 46 ff 00 09 30 09 31 09 32 09 35 81 02 c0 05 01 75 08 95 27 09 01 81 02 75 08 95 30 09 01 91 02 75 08 95 30 09 01 b1 02 c0 a1 02 85 02 75 08 95 30 09 01 b1 02 c0 a1 02 85 ee 75 08 95 30 09 01 b1 02 c0 a1 02 85 ef 75 08 95 30 09 01 b1 02 c0 c0 This is what's returned on Marcelo's device (not sure what is the brand name of his device): 05 01 09 04 a1 01 a1 02 85 01 75 08 95 01 15 00 26 ff 00 81 03 75 01 95 13 15 00 25 01 35 00 45 01 05 09 19 01 29 13 81 02 75 01 95 0d 06 00 ff 81 03 15 00 26 ff 00 05 01 09 01 a1 00 75 08 95 04 35 00 46 ff 00 09 30 09 31 09 32 09 35 81 02 c0 05 01 95 13 09 01 81 02 95 0c 81 01 75 10 95 04 26 ff 03 46 ff 03 09 01 81 02 c0 a1 02 85 02 75 08 95 30 09 01 b1 02 c0 a1 02 85 ee 75 08 95 30 09 01 b1 02 c0 a1 02 85 ef 75 08 95 30 09 01 b1 02 c0 c0 Reported-by: Marcelo Leitner <mleitner@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Tested-by: Marcelo Leitner <mleitner@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-15 06:57:34 +08:00
} else if (sc->quirks & SIXAXIS_CONTROLLER_USB &&
*rsize > sizeof(sixaxis_rdesc_fixup2)) {
hid_info(hdev, "Sony Sixaxis clone detected. Using original report descriptor (size: %d clone; %d new)\n",
*rsize, (int)sizeof(sixaxis_rdesc_fixup2));
*rsize = sizeof(sixaxis_rdesc_fixup2);
memcpy(rdesc, &sixaxis_rdesc_fixup2, *rsize);
}
if (sc->quirks & PS3REMOTE)
return ps3remote_fixup(hdev, rdesc, rsize);
return rdesc;
}
static void sixaxis_parse_report(struct sony_sc *sc, __u8 *rd, int size)
{
static const __u8 sixaxis_battery_capacity[] = { 0, 1, 25, 50, 75, 100 };
unsigned long flags;
__u8 cable_state, battery_capacity, battery_charging;
/*
* The sixaxis is charging if the battery value is 0xee
* and it is fully charged if the value is 0xef.
* It does not report the actual level while charging so it
* is set to 100% while charging is in progress.
*/
if (rd[30] >= 0xee) {
battery_capacity = 100;
battery_charging = !(rd[30] & 0x01);
} else {
__u8 index = rd[30] <= 5 ? rd[30] : 5;
battery_capacity = sixaxis_battery_capacity[index];
battery_charging = 0;
}
cable_state = !(rd[31] & 0x04);
spin_lock_irqsave(&sc->lock, flags);
sc->cable_state = cable_state;
sc->battery_capacity = battery_capacity;
sc->battery_charging = battery_charging;
spin_unlock_irqrestore(&sc->lock, flags);
}
static void dualshock4_parse_report(struct sony_sc *sc, __u8 *rd, int size)
{
struct hid_input *hidinput = list_entry(sc->hdev->inputs.next,
struct hid_input, list);
struct input_dev *input_dev = hidinput->input;
unsigned long flags;
int n, offset;
__u8 cable_state, battery_capacity, battery_charging;
/*
* Battery and touchpad data starts at byte 30 in the USB report and
* 32 in Bluetooth report.
*/
offset = (sc->quirks & DUALSHOCK4_CONTROLLER_USB) ? 30 : 32;
/*
* The lower 4 bits of byte 30 contain the battery level
* and the 5th bit contains the USB cable state.
*/
cable_state = (rd[offset] >> 4) & 0x01;
battery_capacity = rd[offset] & 0x0F;
/*
* When a USB power source is connected the battery level ranges from
* 0 to 10, and when running on battery power it ranges from 0 to 9.
* A battery level above 10 when plugged in means charge completed.
*/
if (!cable_state || battery_capacity > 10)
battery_charging = 0;
else
battery_charging = 1;
if (!cable_state)
battery_capacity++;
if (battery_capacity > 10)
battery_capacity = 10;
battery_capacity *= 10;
spin_lock_irqsave(&sc->lock, flags);
sc->cable_state = cable_state;
sc->battery_capacity = battery_capacity;
sc->battery_charging = battery_charging;
spin_unlock_irqrestore(&sc->lock, flags);
offset += 5;
/*
* The Dualshock 4 multi-touch trackpad data starts at offset 35 on USB
* and 37 on Bluetooth.
* The first 7 bits of the first byte is a counter and bit 8 is a touch
* indicator that is 0 when pressed and 1 when not pressed.
* The next 3 bytes are two 12 bit touch coordinates, X and Y.
* The data for the second touch is in the same format and immediatly
* follows the data for the first.
*/
for (n = 0; n < 2; n++) {
__u16 x, y;
x = rd[offset+1] | ((rd[offset+2] & 0xF) << 8);
y = ((rd[offset+2] & 0xF0) >> 4) | (rd[offset+3] << 4);
input_mt_slot(input_dev, n);
input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
!(rd[offset] >> 7));
input_report_abs(input_dev, ABS_MT_POSITION_X, x);
input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
offset += 4;
}
}
static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
__u8 *rd, int size)
{
struct sony_sc *sc = hid_get_drvdata(hdev);
/*
* Sixaxis HID report has acclerometers/gyro with MSByte first, this
* has to be BYTE_SWAPPED before passing up to joystick interface
*/
if ((sc->quirks & SIXAXIS_CONTROLLER) && rd[0] == 0x01 && size == 49) {
swap(rd[41], rd[42]);
swap(rd[43], rd[44]);
swap(rd[45], rd[46]);
swap(rd[47], rd[48]);
sixaxis_parse_report(sc, rd, size);
} else if (((sc->quirks & DUALSHOCK4_CONTROLLER_USB) && rd[0] == 0x01 &&
size == 64) || ((sc->quirks & DUALSHOCK4_CONTROLLER_BT)
&& rd[0] == 0x11 && size == 78)) {
dualshock4_parse_report(sc, rd, size);
}
return 0;
}
static int sony_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
struct sony_sc *sc = hid_get_drvdata(hdev);
if (sc->quirks & BUZZ_CONTROLLER) {
unsigned int key = usage->hid & HID_USAGE;
if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON)
return -1;
switch (usage->collection_index) {
case 1:
if (key >= ARRAY_SIZE(buzz_keymap))
return -1;
key = buzz_keymap[key];
if (!key)
return -1;
break;
default:
return -1;
}
hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
return 1;
}
if (sc->quirks & PS3REMOTE)
return ps3remote_mapping(hdev, hi, field, usage, bit, max);
/* Let hid-core decide for the others */
return 0;
}
/*
* Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
* to "operational". Without this, the ps3 controller will not report any
* events.
*/
static int sixaxis_set_operational_usb(struct hid_device *hdev)
{
int ret;
char *buf = kmalloc(18, GFP_KERNEL);
if (!buf)
return -ENOMEM;
ret = hid_hw_raw_request(hdev, 0xf2, buf, 17, HID_FEATURE_REPORT,
HID_REQ_GET_REPORT);
if (ret < 0)
hid_err(hdev, "can't set operational mode\n");
kfree(buf);
return ret;
}
static int sixaxis_set_operational_bt(struct hid_device *hdev)
{
unsigned char buf[] = { 0xf4, 0x42, 0x03, 0x00, 0x00 };
return hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
}
/*
* Requesting feature report 0x02 in Bluetooth mode changes the state of the
* controller so that it sends full input reports of type 0x11.
*/
static int dualshock4_set_operational_bt(struct hid_device *hdev)
{
__u8 buf[37] = { 0 };
return hid_hw_raw_request(hdev, 0x02, buf, sizeof(buf),
HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
}
static void buzz_set_leds(struct hid_device *hdev, const __u8 *leds)
{
struct list_head *report_list =
&hdev->report_enum[HID_OUTPUT_REPORT].report_list;
struct hid_report *report = list_entry(report_list->next,
struct hid_report, list);
__s32 *value = report->field[0]->value;
value[0] = 0x00;
value[1] = leds[0] ? 0xff : 0x00;
value[2] = leds[1] ? 0xff : 0x00;
value[3] = leds[2] ? 0xff : 0x00;
value[4] = leds[3] ? 0xff : 0x00;
value[5] = 0x00;
value[6] = 0x00;
hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
}
static void sony_set_leds(struct hid_device *hdev, const __u8 *leds, int count)
{
struct sony_sc *drv_data = hid_get_drvdata(hdev);
int n;
BUG_ON(count > MAX_LEDS);
if (drv_data->quirks & BUZZ_CONTROLLER && count == 4) {
buzz_set_leds(hdev, leds);
} else {
for (n = 0; n < count; n++)
drv_data->led_state[n] = leds[n];
schedule_work(&drv_data->state_worker);
}
}
static void sony_led_set_brightness(struct led_classdev *led,
enum led_brightness value)
{
struct device *dev = led->dev->parent;
struct hid_device *hdev = container_of(dev, struct hid_device, dev);
struct sony_sc *drv_data;
int n;
drv_data = hid_get_drvdata(hdev);
if (!drv_data) {
hid_err(hdev, "No device data\n");
return;
}
for (n = 0; n < drv_data->led_count; n++) {
if (led == drv_data->leds[n]) {
if (value != drv_data->led_state[n]) {
drv_data->led_state[n] = value;
sony_set_leds(hdev, drv_data->led_state, drv_data->led_count);
}
break;
}
}
}
static enum led_brightness sony_led_get_brightness(struct led_classdev *led)
{
struct device *dev = led->dev->parent;
struct hid_device *hdev = container_of(dev, struct hid_device, dev);
struct sony_sc *drv_data;
int n;
drv_data = hid_get_drvdata(hdev);
if (!drv_data) {
hid_err(hdev, "No device data\n");
return LED_OFF;
}
for (n = 0; n < drv_data->led_count; n++) {
if (led == drv_data->leds[n])
return drv_data->led_state[n];
}
return LED_OFF;
}
static void sony_leds_remove(struct hid_device *hdev)
{
struct sony_sc *drv_data;
struct led_classdev *led;
int n;
drv_data = hid_get_drvdata(hdev);
BUG_ON(!(drv_data->quirks & SONY_LED_SUPPORT));
for (n = 0; n < drv_data->led_count; n++) {
led = drv_data->leds[n];
drv_data->leds[n] = NULL;
if (!led)
continue;
led_classdev_unregister(led);
kfree(led);
}
drv_data->led_count = 0;
}
static int sony_leds_init(struct hid_device *hdev)
{
struct sony_sc *drv_data;
int n, ret = 0;
int max_brightness;
int use_colors;
struct led_classdev *led;
size_t name_sz;
char *name;
size_t name_len;
const char *name_fmt;
static const char * const color_str[] = { "red", "green", "blue" };
static const __u8 initial_values[MAX_LEDS] = { 0x00, 0x00, 0x00, 0x00 };
drv_data = hid_get_drvdata(hdev);
BUG_ON(!(drv_data->quirks & SONY_LED_SUPPORT));
if (drv_data->quirks & BUZZ_CONTROLLER) {
drv_data->led_count = 4;
max_brightness = 1;
use_colors = 0;
name_len = strlen("::buzz#");
name_fmt = "%s::buzz%d";
/* Validate expected report characteristics. */
if (!hid_validate_values(hdev, HID_OUTPUT_REPORT, 0, 0, 7))
return -ENODEV;
} else if (drv_data->quirks & DUALSHOCK4_CONTROLLER) {
drv_data->led_count = 3;
max_brightness = 255;
use_colors = 1;
name_len = 0;
name_fmt = "%s:%s";
} else {
drv_data->led_count = 4;
max_brightness = 1;
use_colors = 0;
name_len = strlen("::sony#");
name_fmt = "%s::sony%d";
}
/*
* Clear LEDs as we have no way of reading their initial state. This is
* only relevant if the driver is loaded after somebody actively set the
* LEDs to on
*/
sony_set_leds(hdev, initial_values, drv_data->led_count);
name_sz = strlen(dev_name(&hdev->dev)) + name_len + 1;
for (n = 0; n < drv_data->led_count; n++) {
if (use_colors)
name_sz = strlen(dev_name(&hdev->dev)) + strlen(color_str[n]) + 2;
led = kzalloc(sizeof(struct led_classdev) + name_sz, GFP_KERNEL);
if (!led) {
hid_err(hdev, "Couldn't allocate memory for LED %d\n", n);
ret = -ENOMEM;
goto error_leds;
}
name = (void *)(&led[1]);
if (use_colors)
snprintf(name, name_sz, name_fmt, dev_name(&hdev->dev), color_str[n]);
else
snprintf(name, name_sz, name_fmt, dev_name(&hdev->dev), n + 1);
led->name = name;
led->brightness = 0;
led->max_brightness = max_brightness;
led->brightness_get = sony_led_get_brightness;
led->brightness_set = sony_led_set_brightness;
ret = led_classdev_register(&hdev->dev, led);
if (ret) {
hid_err(hdev, "Failed to register LED %d\n", n);
kfree(led);
goto error_leds;
}
drv_data->leds[n] = led;
}
return ret;
error_leds:
sony_leds_remove(hdev);
return ret;
}
static void sixaxis_state_worker(struct work_struct *work)
{
struct sony_sc *sc = container_of(work, struct sony_sc, state_worker);
unsigned char buf[] = {
0x01,
0x00, 0xff, 0x00, 0xff, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00,
0xff, 0x27, 0x10, 0x00, 0x32,
0xff, 0x27, 0x10, 0x00, 0x32,
0xff, 0x27, 0x10, 0x00, 0x32,
0xff, 0x27, 0x10, 0x00, 0x32,
0x00, 0x00, 0x00, 0x00, 0x00
};
#ifdef CONFIG_SONY_FF
buf[3] = sc->right ? 1 : 0;
buf[5] = sc->left;
#endif
buf[10] |= sc->led_state[0] << 1;
buf[10] |= sc->led_state[1] << 2;
buf[10] |= sc->led_state[2] << 3;
buf[10] |= sc->led_state[3] << 4;
hid_hw_raw_request(sc->hdev, 0x01, buf, sizeof(buf), HID_OUTPUT_REPORT,
HID_REQ_SET_REPORT);
}
static void dualshock4_state_worker(struct work_struct *work)
{
struct sony_sc *sc = container_of(work, struct sony_sc, state_worker);
struct hid_device *hdev = sc->hdev;
int offset;
__u8 buf[78] = { 0 };
if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
buf[0] = 0x05;
buf[1] = 0x03;
offset = 4;
} else {
buf[0] = 0x11;
buf[1] = 0xB0;
buf[3] = 0x0F;
offset = 6;
}
#ifdef CONFIG_SONY_FF
buf[offset++] = sc->right;
buf[offset++] = sc->left;
#else
offset += 2;
#endif
buf[offset++] = sc->led_state[0];
buf[offset++] = sc->led_state[1];
buf[offset++] = sc->led_state[2];
if (sc->quirks & DUALSHOCK4_CONTROLLER_USB)
hid_hw_output_report(hdev, buf, 32);
else
hid_hw_raw_request(hdev, 0x11, buf, 78,
HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
}
#ifdef CONFIG_SONY_FF
static int sony_play_effect(struct input_dev *dev, void *data,
struct ff_effect *effect)
{
struct hid_device *hid = input_get_drvdata(dev);
struct sony_sc *sc = hid_get_drvdata(hid);
if (effect->type != FF_RUMBLE)
return 0;
sc->left = effect->u.rumble.strong_magnitude / 256;
sc->right = effect->u.rumble.weak_magnitude / 256;
schedule_work(&sc->state_worker);
return 0;
}
static int sony_init_ff(struct hid_device *hdev)
{
struct hid_input *hidinput = list_entry(hdev->inputs.next,
struct hid_input, list);
struct input_dev *input_dev = hidinput->input;
input_set_capability(input_dev, EV_FF, FF_RUMBLE);
return input_ff_create_memless(input_dev, NULL, sony_play_effect);
}
#else
static int sony_init_ff(struct hid_device *hdev)
{
return 0;
}
#endif
static int sony_battery_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct sony_sc *sc = container_of(psy, struct sony_sc, battery);
unsigned long flags;
int ret = 0;
u8 battery_charging, battery_capacity, cable_state;
spin_lock_irqsave(&sc->lock, flags);
battery_charging = sc->battery_charging;
battery_capacity = sc->battery_capacity;
cable_state = sc->cable_state;
spin_unlock_irqrestore(&sc->lock, flags);
switch (psp) {
case POWER_SUPPLY_PROP_PRESENT:
val->intval = 1;
break;
case POWER_SUPPLY_PROP_SCOPE:
val->intval = POWER_SUPPLY_SCOPE_DEVICE;
break;
case POWER_SUPPLY_PROP_CAPACITY:
val->intval = battery_capacity;
break;
case POWER_SUPPLY_PROP_STATUS:
if (battery_charging)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else
if (battery_capacity == 100 && cable_state)
val->intval = POWER_SUPPLY_STATUS_FULL;
else
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static int sony_battery_probe(struct sony_sc *sc)
{
static atomic_t power_id_seq = ATOMIC_INIT(0);
unsigned long power_id;
struct hid_device *hdev = sc->hdev;
int ret;
/*
* Set the default battery level to 100% to avoid low battery warnings
* if the battery is polled before the first device report is received.
*/
sc->battery_capacity = 100;
power_id = (unsigned long)atomic_inc_return(&power_id_seq);
sc->battery.properties = sony_battery_props;
sc->battery.num_properties = ARRAY_SIZE(sony_battery_props);
sc->battery.get_property = sony_battery_get_property;
sc->battery.type = POWER_SUPPLY_TYPE_BATTERY;
sc->battery.use_for_apm = 0;
sc->battery.name = kasprintf(GFP_KERNEL, "sony_controller_battery_%lu",
power_id);
if (!sc->battery.name)
return -ENOMEM;
ret = power_supply_register(&hdev->dev, &sc->battery);
if (ret) {
hid_err(hdev, "Unable to register battery device\n");
goto err_free;
}
power_supply_powers(&sc->battery, &hdev->dev);
return 0;
err_free:
kfree(sc->battery.name);
sc->battery.name = NULL;
return ret;
}
static void sony_battery_remove(struct sony_sc *sc)
{
if (!sc->battery.name)
return;
power_supply_unregister(&sc->battery);
kfree(sc->battery.name);
sc->battery.name = NULL;
}
static int sony_register_touchpad(struct sony_sc *sc, int touch_count,
int w, int h)
{
struct hid_input *hidinput = list_entry(sc->hdev->inputs.next,
struct hid_input, list);
struct input_dev *input_dev = hidinput->input;
int ret;
ret = input_mt_init_slots(input_dev, touch_count, 0);
if (ret < 0) {
hid_err(sc->hdev, "Unable to initialize multi-touch slots\n");
return ret;
}
input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, w, 0, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, h, 0, 0);
return 0;
}
/*
* If a controller is plugged in via USB while already connected via Bluetooth
* it will show up as two devices. A global list of connected controllers and
* their MAC addresses is maintained to ensure that a device is only connected
* once.
*/
static int sony_check_add_dev_list(struct sony_sc *sc)
{
struct sony_sc *entry;
unsigned long flags;
int ret;
spin_lock_irqsave(&sony_dev_list_lock, flags);
list_for_each_entry(entry, &sony_device_list, list_node) {
ret = memcmp(sc->mac_address, entry->mac_address,
sizeof(sc->mac_address));
if (!ret) {
ret = -EEXIST;
hid_info(sc->hdev, "controller with MAC address %pMR already connected\n",
sc->mac_address);
goto unlock;
}
}
ret = 0;
list_add(&(sc->list_node), &sony_device_list);
unlock:
spin_unlock_irqrestore(&sony_dev_list_lock, flags);
return ret;
}
static void sony_remove_dev_list(struct sony_sc *sc)
{
unsigned long flags;
if (sc->list_node.next) {
spin_lock_irqsave(&sony_dev_list_lock, flags);
list_del(&(sc->list_node));
spin_unlock_irqrestore(&sony_dev_list_lock, flags);
}
}
static int sony_get_bt_devaddr(struct sony_sc *sc)
{
int ret;
/* HIDP stores the device MAC address as a string in the uniq field. */
ret = strlen(sc->hdev->uniq);
if (ret != 17)
return -EINVAL;
ret = sscanf(sc->hdev->uniq,
"%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
&sc->mac_address[5], &sc->mac_address[4], &sc->mac_address[3],
&sc->mac_address[2], &sc->mac_address[1], &sc->mac_address[0]);
if (ret != 6)
return -EINVAL;
return 0;
}
static int sony_check_add(struct sony_sc *sc)
{
int n, ret;
if ((sc->quirks & DUALSHOCK4_CONTROLLER_BT) ||
(sc->quirks & SIXAXIS_CONTROLLER_BT)) {
/*
* sony_get_bt_devaddr() attempts to parse the Bluetooth MAC
* address from the uniq string where HIDP stores it.
* As uniq cannot be guaranteed to be a MAC address in all cases
* a failure of this function should not prevent the connection.
*/
if (sony_get_bt_devaddr(sc) < 0) {
hid_warn(sc->hdev, "UNIQ does not contain a MAC address; duplicate check skipped\n");
return 0;
}
} else if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
__u8 buf[7];
/*
* The MAC address of a DS4 controller connected via USB can be
* retrieved with feature report 0x81. The address begins at
* offset 1.
*/
ret = hid_hw_raw_request(sc->hdev, 0x81, buf, sizeof(buf),
HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
if (ret != 7) {
hid_err(sc->hdev, "failed to retrieve feature report 0x81 with the DualShock 4 MAC address\n");
return ret < 0 ? ret : -EINVAL;
}
memcpy(sc->mac_address, &buf[1], sizeof(sc->mac_address));
} else if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
__u8 buf[18];
/*
* The MAC address of a Sixaxis controller connected via USB can
* be retrieved with feature report 0xf2. The address begins at
* offset 4.
*/
ret = hid_hw_raw_request(sc->hdev, 0xf2, buf, sizeof(buf),
HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
if (ret != 18) {
hid_err(sc->hdev, "failed to retrieve feature report 0xf2 with the Sixaxis MAC address\n");
return ret < 0 ? ret : -EINVAL;
}
/*
* The Sixaxis device MAC in the report is big-endian and must
* be byte-swapped.
*/
for (n = 0; n < 6; n++)
sc->mac_address[5-n] = buf[4+n];
} else {
return 0;
}
return sony_check_add_dev_list(sc);
}
static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
unsigned long quirks = id->driver_data;
struct sony_sc *sc;
unsigned int connect_mask = HID_CONNECT_DEFAULT;
sc = devm_kzalloc(&hdev->dev, sizeof(*sc), GFP_KERNEL);
if (sc == NULL) {
hid_err(hdev, "can't alloc sony descriptor\n");
return -ENOMEM;
}
sc->quirks = quirks;
hid_set_drvdata(hdev, sc);
sc->hdev = hdev;
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "parse failed\n");
return ret;
}
if (sc->quirks & VAIO_RDESC_CONSTANT)
connect_mask |= HID_CONNECT_HIDDEV_FORCE;
else if (sc->quirks & SIXAXIS_CONTROLLER_USB)
connect_mask |= HID_CONNECT_HIDDEV_FORCE;
else if (sc->quirks & SIXAXIS_CONTROLLER_BT)
connect_mask |= HID_CONNECT_HIDDEV_FORCE;
ret = hid_hw_start(hdev, connect_mask);
if (ret) {
hid_err(hdev, "hw start failed\n");
return ret;
}
if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
/*
* The Sony Sixaxis does not handle HID Output Reports on the
* Interrupt EP like it could, so we need to force HID Output
* Reports to use HID_REQ_SET_REPORT on the Control EP.
*
* There is also another issue about HID Output Reports via USB,
* the Sixaxis does not want the report_id as part of the data
* packet, so we have to discard buf[0] when sending the actual
* control message, even for numbered reports, humpf!
*/
hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
hdev->quirks |= HID_QUIRK_SKIP_OUTPUT_REPORT_ID;
ret = sixaxis_set_operational_usb(hdev);
sc->worker_initialized = 1;
INIT_WORK(&sc->state_worker, sixaxis_state_worker);
} else if (sc->quirks & SIXAXIS_CONTROLLER_BT) {
/*
* The Sixaxis wants output reports sent on the ctrl endpoint
* when connected via Bluetooth.
*/
hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
ret = sixaxis_set_operational_bt(hdev);
sc->worker_initialized = 1;
INIT_WORK(&sc->state_worker, sixaxis_state_worker);
} else if (sc->quirks & DUALSHOCK4_CONTROLLER) {
if (sc->quirks & DUALSHOCK4_CONTROLLER_BT) {
/*
* The DualShock 4 wants output reports sent on the ctrl
* endpoint when connected via Bluetooth.
*/
hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
ret = dualshock4_set_operational_bt(hdev);
if (ret < 0) {
hid_err(hdev, "failed to set the Dualshock 4 operational mode\n");
goto err_stop;
}
}
/*
* The Dualshock 4 touchpad supports 2 touches and has a
* resolution of 1920x940.
*/
ret = sony_register_touchpad(sc, 2, 1920, 940);
if (ret < 0)
goto err_stop;
sc->worker_initialized = 1;
INIT_WORK(&sc->state_worker, dualshock4_state_worker);
} else {
ret = 0;
}
if (ret < 0)
goto err_stop;
ret = sony_check_add(sc);
if (ret < 0)
goto err_stop;
if (sc->quirks & SONY_LED_SUPPORT) {
ret = sony_leds_init(hdev);
if (ret < 0)
goto err_stop;
}
if (sc->quirks & SONY_BATTERY_SUPPORT) {
ret = sony_battery_probe(sc);
if (ret < 0)
goto err_stop;
/* Open the device to receive reports with battery info */
ret = hid_hw_open(hdev);
if (ret < 0) {
hid_err(hdev, "hw open failed\n");
goto err_stop;
}
}
if (sc->quirks & SONY_FF_SUPPORT) {
ret = sony_init_ff(hdev);
if (ret < 0)
goto err_close;
}
return 0;
err_close:
hid_hw_close(hdev);
err_stop:
if (sc->quirks & SONY_LED_SUPPORT)
sony_leds_remove(hdev);
if (sc->quirks & SONY_BATTERY_SUPPORT)
sony_battery_remove(sc);
if (sc->worker_initialized)
cancel_work_sync(&sc->state_worker);
sony_remove_dev_list(sc);
hid_hw_stop(hdev);
return ret;
}
static void sony_remove(struct hid_device *hdev)
{
struct sony_sc *sc = hid_get_drvdata(hdev);
if (sc->quirks & SONY_LED_SUPPORT)
sony_leds_remove(hdev);
if (sc->worker_initialized)
cancel_work_sync(&sc->state_worker);
if (sc->quirks & SONY_BATTERY_SUPPORT) {
hid_hw_close(hdev);
sony_battery_remove(sc);
}
if (sc->worker_initialized)
cancel_work_sync(&sc->state_worker);
sony_remove_dev_list(sc);
hid_hw_stop(hdev);
}
static const struct hid_device_id sony_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER),
.driver_data = SIXAXIS_CONTROLLER_USB },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER),
.driver_data = SIXAXIS_CONTROLLER_USB },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER),
.driver_data = SIXAXIS_CONTROLLER_BT },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE),
.driver_data = VAIO_RDESC_CONSTANT },
HID: add support for Sony RF receiver with USB product id 0x0374 Some Vaio desktop computers, among them the VGC-LN51JGB multimedia PC, have a RF receiver, multi-interface USB device 054c:0374, that is used to connect a wireless keyboard and a wireless mouse. The keyboard works flawlessly, but the mouse (VGP-WMS3 in my case) does not seem to be generating any pointer events. The problem is that the mouse pointer is wrongly declared as a constant non-data variable in the report descriptor (see lsusb and usbhid-dump output below), with the consequence that it is ignored by the HID code. Add this device to the have-special-driver list and fix up the report descriptor in the Sony-specific driver which happens to already have a fixup for a similar firmware bug. # lsusb -vd 054C:0374 Bus 003 Device 002: ID 054c:0374 Sony Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x054c Sony Corp. idProduct 0x0374 iSerial 0 [...] Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 2 RF Receiver [...] Report Descriptor: (length is 100) [...] Item(Global): Usage Page, data= [ 0x01 ] 1 Generic Desktop Controls Item(Local ): Usage, data= [ 0x30 ] 48 Direction-X Item(Local ): Usage, data= [ 0x31 ] 49 Direction-Y Item(Global): Report Count, data= [ 0x02 ] 2 Item(Global): Report Size, data= [ 0x08 ] 8 Item(Global): Logical Minimum, data= [ 0x81 ] 129 Item(Global): Logical Maximum, data= [ 0x7f ] 127 Item(Main ): Input, data= [ 0x07 ] 7 Constant Variable Relative No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield # usbhid-dump 003:002:001:DESCRIPTOR 1357910009.758544 05 01 09 02 A1 01 05 01 09 02 A1 02 85 01 09 01 A1 00 05 09 19 01 29 05 95 05 75 01 15 00 25 01 81 02 75 03 95 01 81 01 05 01 09 30 09 31 95 02 75 08 15 81 25 7F 81 07 A1 02 85 01 09 38 35 00 45 00 15 81 25 7F 95 01 75 08 81 06 C0 A1 02 85 01 05 0C 15 81 25 7F 95 01 75 08 0A 38 02 81 06 C0 C0 C0 C0 Cc: linux-input@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-15 18:40:48 +08:00
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGP_MOUSE),
.driver_data = VAIO_RDESC_CONSTANT },
/* Wired Buzz Controller. Reported as Sony Hub from its USB ID and as
* Logitech joystick from the device descriptor. */
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_BUZZ_CONTROLLER),
.driver_data = BUZZ_CONTROLLER },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER),
.driver_data = BUZZ_CONTROLLER },
/* PS3 BD Remote Control */
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE),
.driver_data = PS3REMOTE },
/* Logitech Harmony Adapter for PS3 */
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3),
.driver_data = PS3REMOTE },
/* Sony Dualshock 4 controllers for PS4 */
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER),
.driver_data = DUALSHOCK4_CONTROLLER_USB },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER),
.driver_data = DUALSHOCK4_CONTROLLER_BT },
{ }
};
MODULE_DEVICE_TABLE(hid, sony_devices);
static struct hid_driver sony_driver = {
.name = "sony",
.id_table = sony_devices,
.input_mapping = sony_mapping,
.probe = sony_probe,
.remove = sony_remove,
.report_fixup = sony_report_fixup,
.raw_event = sony_raw_event
};
module_hid_driver(sony_driver);
MODULE_LICENSE("GPL");