linux/drivers/base/power/domain.c

1026 lines
25 KiB
C
Raw Normal View History

/*
* drivers/base/power/domain.c - Common code related to device power domains.
*
* Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
*
* This file is released under the GPLv2.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
#include <linux/pm_domain.h>
#include <linux/slab.h>
#include <linux/err.h>
#ifdef CONFIG_PM
static struct generic_pm_domain *dev_to_genpd(struct device *dev)
{
if (IS_ERR_OR_NULL(dev->pm_domain))
return ERR_PTR(-EINVAL);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 04:13:19 +08:00
return pd_to_genpd(dev->pm_domain);
}
static void genpd_sd_counter_dec(struct generic_pm_domain *genpd)
{
if (!WARN_ON(genpd->sd_count == 0))
genpd->sd_count--;
}
/**
* pm_genpd_poweron - Restore power to a given PM domain and its parents.
* @genpd: PM domain to power up.
*
* Restore power to @genpd and all of its parents so that it is possible to
* resume a device belonging to it.
*/
static int pm_genpd_poweron(struct generic_pm_domain *genpd)
{
int ret = 0;
start:
if (genpd->parent)
mutex_lock(&genpd->parent->lock);
mutex_lock_nested(&genpd->lock, SINGLE_DEPTH_NESTING);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 04:13:19 +08:00
if (!genpd->power_is_off
|| (genpd->prepared_count > 0 && genpd->suspend_power_off))
goto out;
if (genpd->parent && genpd->parent->power_is_off) {
mutex_unlock(&genpd->lock);
mutex_unlock(&genpd->parent->lock);
ret = pm_genpd_poweron(genpd->parent);
if (ret)
return ret;
goto start;
}
if (genpd->power_on) {
int ret = genpd->power_on(genpd);
if (ret)
goto out;
}
genpd->power_is_off = false;
if (genpd->parent)
genpd->parent->sd_count++;
out:
mutex_unlock(&genpd->lock);
if (genpd->parent)
mutex_unlock(&genpd->parent->lock);
return ret;
}
#endif /* CONFIG_PM */
#ifdef CONFIG_PM_RUNTIME
/**
* __pm_genpd_save_device - Save the pre-suspend state of a device.
* @dle: Device list entry of the device to save the state of.
* @genpd: PM domain the device belongs to.
*/
static int __pm_genpd_save_device(struct dev_list_entry *dle,
struct generic_pm_domain *genpd)
{
struct device *dev = dle->dev;
struct device_driver *drv = dev->driver;
int ret = 0;
if (dle->need_restore)
return 0;
if (drv && drv->pm && drv->pm->runtime_suspend) {
if (genpd->start_device)
genpd->start_device(dev);
ret = drv->pm->runtime_suspend(dev);
if (genpd->stop_device)
genpd->stop_device(dev);
}
if (!ret)
dle->need_restore = true;
return ret;
}
/**
* __pm_genpd_restore_device - Restore the pre-suspend state of a device.
* @dle: Device list entry of the device to restore the state of.
* @genpd: PM domain the device belongs to.
*/
static void __pm_genpd_restore_device(struct dev_list_entry *dle,
struct generic_pm_domain *genpd)
{
struct device *dev = dle->dev;
struct device_driver *drv = dev->driver;
if (!dle->need_restore)
return;
if (drv && drv->pm && drv->pm->runtime_resume) {
if (genpd->start_device)
genpd->start_device(dev);
drv->pm->runtime_resume(dev);
if (genpd->stop_device)
genpd->stop_device(dev);
}
dle->need_restore = false;
}
/**
* pm_genpd_poweroff - Remove power from a given PM domain.
* @genpd: PM domain to power down.
*
* If all of the @genpd's devices have been suspended and all of its subdomains
* have been powered down, run the runtime suspend callbacks provided by all of
* the @genpd's devices' drivers and remove power from @genpd.
*/
static int pm_genpd_poweroff(struct generic_pm_domain *genpd)
{
struct generic_pm_domain *parent;
struct dev_list_entry *dle;
unsigned int not_suspended;
int ret;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 04:13:19 +08:00
if (genpd->power_is_off || genpd->prepared_count > 0)
return 0;
if (genpd->sd_count > 0)
return -EBUSY;
not_suspended = 0;
list_for_each_entry(dle, &genpd->dev_list, node)
if (dle->dev->driver && !pm_runtime_suspended(dle->dev))
not_suspended++;
if (not_suspended > genpd->in_progress)
return -EBUSY;
if (genpd->gov && genpd->gov->power_down_ok) {
if (!genpd->gov->power_down_ok(&genpd->domain))
return -EAGAIN;
}
list_for_each_entry_reverse(dle, &genpd->dev_list, node) {
ret = __pm_genpd_save_device(dle, genpd);
if (ret)
goto err_dev;
}
if (genpd->power_off)
genpd->power_off(genpd);
genpd->power_is_off = true;
parent = genpd->parent;
if (parent) {
genpd_sd_counter_dec(parent);
if (parent->sd_count == 0)
queue_work(pm_wq, &parent->power_off_work);
}
return 0;
err_dev:
list_for_each_entry_continue(dle, &genpd->dev_list, node)
__pm_genpd_restore_device(dle, genpd);
return ret;
}
/**
* genpd_power_off_work_fn - Power off PM domain whose subdomain count is 0.
* @work: Work structure used for scheduling the execution of this function.
*/
static void genpd_power_off_work_fn(struct work_struct *work)
{
struct generic_pm_domain *genpd;
genpd = container_of(work, struct generic_pm_domain, power_off_work);
if (genpd->parent)
mutex_lock(&genpd->parent->lock);
mutex_lock_nested(&genpd->lock, SINGLE_DEPTH_NESTING);
pm_genpd_poweroff(genpd);
mutex_unlock(&genpd->lock);
if (genpd->parent)
mutex_unlock(&genpd->parent->lock);
}
/**
* pm_genpd_runtime_suspend - Suspend a device belonging to I/O PM domain.
* @dev: Device to suspend.
*
* Carry out a runtime suspend of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a PM domain consisting of I/O devices.
*/
static int pm_genpd_runtime_suspend(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
if (genpd->parent)
mutex_lock(&genpd->parent->lock);
mutex_lock_nested(&genpd->lock, SINGLE_DEPTH_NESTING);
if (genpd->stop_device) {
int ret = genpd->stop_device(dev);
if (ret)
goto out;
}
genpd->in_progress++;
pm_genpd_poweroff(genpd);
genpd->in_progress--;
out:
mutex_unlock(&genpd->lock);
if (genpd->parent)
mutex_unlock(&genpd->parent->lock);
return 0;
}
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 04:13:19 +08:00
/**
* __pm_genpd_runtime_resume - Resume a device belonging to I/O PM domain.
* @dev: Device to resume.
* @genpd: PM domain the device belongs to.
*/
static void __pm_genpd_runtime_resume(struct device *dev,
struct generic_pm_domain *genpd)
{
struct dev_list_entry *dle;
list_for_each_entry(dle, &genpd->dev_list, node) {
if (dle->dev == dev) {
__pm_genpd_restore_device(dle, genpd);
break;
}
}
if (genpd->start_device)
genpd->start_device(dev);
}
/**
* pm_genpd_runtime_resume - Resume a device belonging to I/O PM domain.
* @dev: Device to resume.
*
* Carry out a runtime resume of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a PM domain consisting of I/O devices.
*/
static int pm_genpd_runtime_resume(struct device *dev)
{
struct generic_pm_domain *genpd;
int ret;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
ret = pm_genpd_poweron(genpd);
if (ret)
return ret;
mutex_lock(&genpd->lock);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 04:13:19 +08:00
__pm_genpd_runtime_resume(dev, genpd);
mutex_unlock(&genpd->lock);
return 0;
}
#else
static inline void genpd_power_off_work_fn(struct work_struct *work) {}
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 04:13:19 +08:00
static inline void __pm_genpd_runtime_resume(struct device *dev,
struct generic_pm_domain *genpd) {}
#define pm_genpd_runtime_suspend NULL
#define pm_genpd_runtime_resume NULL
#endif /* CONFIG_PM_RUNTIME */
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 04:13:19 +08:00
#ifdef CONFIG_PM_SLEEP
/**
* pm_genpd_sync_poweroff - Synchronously power off a PM domain and its parents.
* @genpd: PM domain to power off, if possible.
*
* Check if the given PM domain can be powered off (during system suspend or
* hibernation) and do that if so. Also, in that case propagate to its parent.
*
* This function is only called in "noirq" stages of system power transitions,
* so it need not acquire locks (all of the "noirq" callbacks are executed
* sequentially, so it is guaranteed that it will never run twice in parallel).
*/
static void pm_genpd_sync_poweroff(struct generic_pm_domain *genpd)
{
struct generic_pm_domain *parent = genpd->parent;
if (genpd->power_is_off)
return;
if (genpd->suspended_count != genpd->device_count || genpd->sd_count > 0)
return;
if (genpd->power_off)
genpd->power_off(genpd);
genpd->power_is_off = true;
if (parent) {
genpd_sd_counter_dec(parent);
pm_genpd_sync_poweroff(parent);
}
}
/**
* pm_genpd_prepare - Start power transition of a device in a PM domain.
* @dev: Device to start the transition of.
*
* Start a power transition of a device (during a system-wide power transition)
* under the assumption that its pm_domain field points to the domain member of
* an object of type struct generic_pm_domain representing a PM domain
* consisting of I/O devices.
*/
static int pm_genpd_prepare(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
mutex_lock(&genpd->lock);
if (genpd->prepared_count++ == 0)
genpd->suspend_power_off = genpd->power_is_off;
if (genpd->suspend_power_off) {
mutex_unlock(&genpd->lock);
return 0;
}
/*
* If the device is in the (runtime) "suspended" state, call
* .start_device() for it, if defined.
*/
if (pm_runtime_suspended(dev))
__pm_genpd_runtime_resume(dev, genpd);
/*
* Do not check if runtime resume is pending at this point, because it
* has been taken care of already and if pm_genpd_poweron() ran at this
* point as a result of the check, it would deadlock.
*/
__pm_runtime_disable(dev, false);
mutex_unlock(&genpd->lock);
return pm_generic_prepare(dev);
}
/**
* pm_genpd_suspend - Suspend a device belonging to an I/O PM domain.
* @dev: Device to suspend.
*
* Suspend a device under the assumption that its pm_domain field points to the
* domain member of an object of type struct generic_pm_domain representing
* a PM domain consisting of I/O devices.
*/
static int pm_genpd_suspend(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
return genpd->suspend_power_off ? 0 : pm_generic_suspend(dev);
}
/**
* pm_genpd_suspend_noirq - Late suspend of a device from an I/O PM domain.
* @dev: Device to suspend.
*
* Carry out a late suspend of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a PM domain consisting of I/O devices.
*/
static int pm_genpd_suspend_noirq(struct device *dev)
{
struct generic_pm_domain *genpd;
int ret;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
if (genpd->suspend_power_off)
return 0;
ret = pm_generic_suspend_noirq(dev);
if (ret)
return ret;
if (genpd->stop_device)
genpd->stop_device(dev);
/*
* Since all of the "noirq" callbacks are executed sequentially, it is
* guaranteed that this function will never run twice in parallel for
* the same PM domain, so it is not necessary to use locking here.
*/
genpd->suspended_count++;
pm_genpd_sync_poweroff(genpd);
return 0;
}
/**
* pm_genpd_resume_noirq - Early resume of a device from an I/O power domain.
* @dev: Device to resume.
*
* Carry out an early resume of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a power domain consisting of I/O
* devices.
*/
static int pm_genpd_resume_noirq(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
if (genpd->suspend_power_off)
return 0;
/*
* Since all of the "noirq" callbacks are executed sequentially, it is
* guaranteed that this function will never run twice in parallel for
* the same PM domain, so it is not necessary to use locking here.
*/
pm_genpd_poweron(genpd);
genpd->suspended_count--;
if (genpd->start_device)
genpd->start_device(dev);
return pm_generic_resume_noirq(dev);
}
/**
* pm_genpd_resume - Resume a device belonging to an I/O power domain.
* @dev: Device to resume.
*
* Resume a device under the assumption that its pm_domain field points to the
* domain member of an object of type struct generic_pm_domain representing
* a power domain consisting of I/O devices.
*/
static int pm_genpd_resume(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
return genpd->suspend_power_off ? 0 : pm_generic_resume(dev);
}
/**
* pm_genpd_freeze - Freeze a device belonging to an I/O power domain.
* @dev: Device to freeze.
*
* Freeze a device under the assumption that its pm_domain field points to the
* domain member of an object of type struct generic_pm_domain representing
* a power domain consisting of I/O devices.
*/
static int pm_genpd_freeze(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
return genpd->suspend_power_off ? 0 : pm_generic_freeze(dev);
}
/**
* pm_genpd_freeze_noirq - Late freeze of a device from an I/O power domain.
* @dev: Device to freeze.
*
* Carry out a late freeze of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a power domain consisting of I/O
* devices.
*/
static int pm_genpd_freeze_noirq(struct device *dev)
{
struct generic_pm_domain *genpd;
int ret;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
if (genpd->suspend_power_off)
return 0;
ret = pm_generic_freeze_noirq(dev);
if (ret)
return ret;
if (genpd->stop_device)
genpd->stop_device(dev);
return 0;
}
/**
* pm_genpd_thaw_noirq - Early thaw of a device from an I/O power domain.
* @dev: Device to thaw.
*
* Carry out an early thaw of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a power domain consisting of I/O
* devices.
*/
static int pm_genpd_thaw_noirq(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
if (genpd->suspend_power_off)
return 0;
if (genpd->start_device)
genpd->start_device(dev);
return pm_generic_thaw_noirq(dev);
}
/**
* pm_genpd_thaw - Thaw a device belonging to an I/O power domain.
* @dev: Device to thaw.
*
* Thaw a device under the assumption that its pm_domain field points to the
* domain member of an object of type struct generic_pm_domain representing
* a power domain consisting of I/O devices.
*/
static int pm_genpd_thaw(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
return genpd->suspend_power_off ? 0 : pm_generic_thaw(dev);
}
/**
* pm_genpd_dev_poweroff - Power off a device belonging to an I/O PM domain.
* @dev: Device to suspend.
*
* Power off a device under the assumption that its pm_domain field points to
* the domain member of an object of type struct generic_pm_domain representing
* a PM domain consisting of I/O devices.
*/
static int pm_genpd_dev_poweroff(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
return genpd->suspend_power_off ? 0 : pm_generic_poweroff(dev);
}
/**
* pm_genpd_dev_poweroff_noirq - Late power off of a device from a PM domain.
* @dev: Device to suspend.
*
* Carry out a late powering off of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a PM domain consisting of I/O devices.
*/
static int pm_genpd_dev_poweroff_noirq(struct device *dev)
{
struct generic_pm_domain *genpd;
int ret;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
if (genpd->suspend_power_off)
return 0;
ret = pm_generic_poweroff_noirq(dev);
if (ret)
return ret;
if (genpd->stop_device)
genpd->stop_device(dev);
/*
* Since all of the "noirq" callbacks are executed sequentially, it is
* guaranteed that this function will never run twice in parallel for
* the same PM domain, so it is not necessary to use locking here.
*/
genpd->suspended_count++;
pm_genpd_sync_poweroff(genpd);
return 0;
}
/**
* pm_genpd_restore_noirq - Early restore of a device from an I/O power domain.
* @dev: Device to resume.
*
* Carry out an early restore of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a power domain consisting of I/O
* devices.
*/
static int pm_genpd_restore_noirq(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
/*
* Since all of the "noirq" callbacks are executed sequentially, it is
* guaranteed that this function will never run twice in parallel for
* the same PM domain, so it is not necessary to use locking here.
*/
genpd->power_is_off = true;
if (genpd->suspend_power_off) {
/*
* The boot kernel might put the domain into the power on state,
* so make sure it really is powered off.
*/
if (genpd->power_off)
genpd->power_off(genpd);
return 0;
}
pm_genpd_poweron(genpd);
genpd->suspended_count--;
if (genpd->start_device)
genpd->start_device(dev);
return pm_generic_restore_noirq(dev);
}
/**
* pm_genpd_restore - Restore a device belonging to an I/O power domain.
* @dev: Device to resume.
*
* Restore a device under the assumption that its pm_domain field points to the
* domain member of an object of type struct generic_pm_domain representing
* a power domain consisting of I/O devices.
*/
static int pm_genpd_restore(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
return genpd->suspend_power_off ? 0 : pm_generic_restore(dev);
}
/**
* pm_genpd_complete - Complete power transition of a device in a power domain.
* @dev: Device to complete the transition of.
*
* Complete a power transition of a device (during a system-wide power
* transition) under the assumption that its pm_domain field points to the
* domain member of an object of type struct generic_pm_domain representing
* a power domain consisting of I/O devices.
*/
static void pm_genpd_complete(struct device *dev)
{
struct generic_pm_domain *genpd;
bool run_complete;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return;
mutex_lock(&genpd->lock);
run_complete = !genpd->suspend_power_off;
if (--genpd->prepared_count == 0)
genpd->suspend_power_off = false;
mutex_unlock(&genpd->lock);
if (run_complete) {
pm_generic_complete(dev);
pm_runtime_enable(dev);
}
}
#else
#define pm_genpd_prepare NULL
#define pm_genpd_suspend NULL
#define pm_genpd_suspend_noirq NULL
#define pm_genpd_resume_noirq NULL
#define pm_genpd_resume NULL
#define pm_genpd_freeze NULL
#define pm_genpd_freeze_noirq NULL
#define pm_genpd_thaw_noirq NULL
#define pm_genpd_thaw NULL
#define pm_genpd_dev_poweroff_noirq NULL
#define pm_genpd_dev_poweroff NULL
#define pm_genpd_restore_noirq NULL
#define pm_genpd_restore NULL
#define pm_genpd_complete NULL
#endif /* CONFIG_PM_SLEEP */
/**
* pm_genpd_add_device - Add a device to an I/O PM domain.
* @genpd: PM domain to add the device to.
* @dev: Device to be added.
*/
int pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev)
{
struct dev_list_entry *dle;
int ret = 0;
dev_dbg(dev, "%s()\n", __func__);
if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(dev))
return -EINVAL;
mutex_lock(&genpd->lock);
if (genpd->power_is_off) {
ret = -EINVAL;
goto out;
}
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 04:13:19 +08:00
if (genpd->prepared_count > 0) {
ret = -EAGAIN;
goto out;
}
list_for_each_entry(dle, &genpd->dev_list, node)
if (dle->dev == dev) {
ret = -EINVAL;
goto out;
}
dle = kzalloc(sizeof(*dle), GFP_KERNEL);
if (!dle) {
ret = -ENOMEM;
goto out;
}
dle->dev = dev;
dle->need_restore = false;
list_add_tail(&dle->node, &genpd->dev_list);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 04:13:19 +08:00
genpd->device_count++;
spin_lock_irq(&dev->power.lock);
dev->pm_domain = &genpd->domain;
spin_unlock_irq(&dev->power.lock);
out:
mutex_unlock(&genpd->lock);
return ret;
}
/**
* pm_genpd_remove_device - Remove a device from an I/O PM domain.
* @genpd: PM domain to remove the device from.
* @dev: Device to be removed.
*/
int pm_genpd_remove_device(struct generic_pm_domain *genpd,
struct device *dev)
{
struct dev_list_entry *dle;
int ret = -EINVAL;
dev_dbg(dev, "%s()\n", __func__);
if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(dev))
return -EINVAL;
mutex_lock(&genpd->lock);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 04:13:19 +08:00
if (genpd->prepared_count > 0) {
ret = -EAGAIN;
goto out;
}
list_for_each_entry(dle, &genpd->dev_list, node) {
if (dle->dev != dev)
continue;
spin_lock_irq(&dev->power.lock);
dev->pm_domain = NULL;
spin_unlock_irq(&dev->power.lock);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 04:13:19 +08:00
genpd->device_count--;
list_del(&dle->node);
kfree(dle);
ret = 0;
break;
}
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 04:13:19 +08:00
out:
mutex_unlock(&genpd->lock);
return ret;
}
/**
* pm_genpd_add_subdomain - Add a subdomain to an I/O PM domain.
* @genpd: Master PM domain to add the subdomain to.
* @new_subdomain: Subdomain to be added.
*/
int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
struct generic_pm_domain *new_subdomain)
{
struct generic_pm_domain *subdomain;
int ret = 0;
if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(new_subdomain))
return -EINVAL;
mutex_lock(&genpd->lock);
if (genpd->power_is_off && !new_subdomain->power_is_off) {
ret = -EINVAL;
goto out;
}
list_for_each_entry(subdomain, &genpd->sd_list, sd_node) {
if (subdomain == new_subdomain) {
ret = -EINVAL;
goto out;
}
}
mutex_lock_nested(&new_subdomain->lock, SINGLE_DEPTH_NESTING);
list_add_tail(&new_subdomain->sd_node, &genpd->sd_list);
new_subdomain->parent = genpd;
if (!subdomain->power_is_off)
genpd->sd_count++;
mutex_unlock(&new_subdomain->lock);
out:
mutex_unlock(&genpd->lock);
return ret;
}
/**
* pm_genpd_remove_subdomain - Remove a subdomain from an I/O PM domain.
* @genpd: Master PM domain to remove the subdomain from.
* @target: Subdomain to be removed.
*/
int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
struct generic_pm_domain *target)
{
struct generic_pm_domain *subdomain;
int ret = -EINVAL;
if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(target))
return -EINVAL;
mutex_lock(&genpd->lock);
list_for_each_entry(subdomain, &genpd->sd_list, sd_node) {
if (subdomain != target)
continue;
mutex_lock_nested(&subdomain->lock, SINGLE_DEPTH_NESTING);
list_del(&subdomain->sd_node);
subdomain->parent = NULL;
if (!subdomain->power_is_off)
genpd_sd_counter_dec(genpd);
mutex_unlock(&subdomain->lock);
ret = 0;
break;
}
mutex_unlock(&genpd->lock);
return ret;
}
/**
* pm_genpd_init - Initialize a generic I/O PM domain object.
* @genpd: PM domain object to initialize.
* @gov: PM domain governor to associate with the domain (may be NULL).
* @is_off: Initial value of the domain's power_is_off field.
*/
void pm_genpd_init(struct generic_pm_domain *genpd,
struct dev_power_governor *gov, bool is_off)
{
if (IS_ERR_OR_NULL(genpd))
return;
INIT_LIST_HEAD(&genpd->sd_node);
genpd->parent = NULL;
INIT_LIST_HEAD(&genpd->dev_list);
INIT_LIST_HEAD(&genpd->sd_list);
mutex_init(&genpd->lock);
genpd->gov = gov;
INIT_WORK(&genpd->power_off_work, genpd_power_off_work_fn);
genpd->in_progress = 0;
genpd->sd_count = 0;
genpd->power_is_off = is_off;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 04:13:19 +08:00
genpd->device_count = 0;
genpd->suspended_count = 0;
genpd->domain.ops.runtime_suspend = pm_genpd_runtime_suspend;
genpd->domain.ops.runtime_resume = pm_genpd_runtime_resume;
genpd->domain.ops.runtime_idle = pm_generic_runtime_idle;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 04:13:19 +08:00
genpd->domain.ops.prepare = pm_genpd_prepare;
genpd->domain.ops.suspend = pm_genpd_suspend;
genpd->domain.ops.suspend_noirq = pm_genpd_suspend_noirq;
genpd->domain.ops.resume_noirq = pm_genpd_resume_noirq;
genpd->domain.ops.resume = pm_genpd_resume;
genpd->domain.ops.freeze = pm_genpd_freeze;
genpd->domain.ops.freeze_noirq = pm_genpd_freeze_noirq;
genpd->domain.ops.thaw_noirq = pm_genpd_thaw_noirq;
genpd->domain.ops.thaw = pm_genpd_thaw;
genpd->domain.ops.poweroff = pm_genpd_dev_poweroff;
genpd->domain.ops.poweroff_noirq = pm_genpd_dev_poweroff_noirq;
genpd->domain.ops.restore_noirq = pm_genpd_restore_noirq;
genpd->domain.ops.restore = pm_genpd_restore;
genpd->domain.ops.complete = pm_genpd_complete;
}