linux/drivers/gpu/drm/i915/i915_dma.c

2362 lines
59 KiB
C
Raw Normal View History

/* i915_dma.c -- DMA support for the I915 -*- linux-c -*-
*/
/*
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#include "drmP.h"
#include "drm.h"
#include "drm_crtc_helper.h"
#include "drm_fb_helper.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
#include "i915_trace.h"
#include "../../../platform/x86/intel_ips.h"
#include <linux/pci.h>
#include <linux/vgaarb.h>
#include <linux/acpi.h>
#include <linux/pnp.h>
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
#include <linux/vga_switcheroo.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/module.h>
#include <acpi/video.h>
#include <asm/pat.h>
static void i915_write_hws_pga(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 addr;
addr = dev_priv->status_page_dmah->busaddr;
if (INTEL_INFO(dev)->gen >= 4)
addr |= (dev_priv->status_page_dmah->busaddr >> 28) & 0xf0;
I915_WRITE(HWS_PGA, addr);
}
/**
* Sets up the hardware status page for devices that need a physical address
* in the register.
*/
static int i915_init_phys_hws(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
/* Program Hardware Status Page */
dev_priv->status_page_dmah =
drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE);
if (!dev_priv->status_page_dmah) {
DRM_ERROR("Can not allocate hardware status page\n");
return -ENOMEM;
}
memset_io((void __force __iomem *)dev_priv->status_page_dmah->vaddr,
0, PAGE_SIZE);
i915_write_hws_pga(dev);
DRM_DEBUG_DRIVER("Enabled hardware status page\n");
return 0;
}
/**
* Frees the hardware status page, whether it's a physical address or a virtual
* address set up by the X Server.
*/
static void i915_free_hws(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_ring_buffer *ring = LP_RING(dev_priv);
if (dev_priv->status_page_dmah) {
drm_pci_free(dev, dev_priv->status_page_dmah);
dev_priv->status_page_dmah = NULL;
}
if (ring->status_page.gfx_addr) {
ring->status_page.gfx_addr = 0;
drm_core_ioremapfree(&dev_priv->hws_map, dev);
}
/* Need to rewrite hardware status page */
I915_WRITE(HWS_PGA, 0x1ffff000);
}
void i915_kernel_lost_context(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv;
struct intel_ring_buffer *ring = LP_RING(dev_priv);
/*
* We should never lose context on the ring with modesetting
* as we don't expose it to userspace
*/
if (drm_core_check_feature(dev, DRIVER_MODESET))
return;
ring->head = I915_READ_HEAD(ring) & HEAD_ADDR;
ring->tail = I915_READ_TAIL(ring) & TAIL_ADDR;
ring->space = ring->head - (ring->tail + 8);
if (ring->space < 0)
ring->space += ring->size;
if (!dev->primary->master)
return;
master_priv = dev->primary->master->driver_priv;
if (ring->head == ring->tail && master_priv->sarea_priv)
master_priv->sarea_priv->perf_boxes |= I915_BOX_RING_EMPTY;
}
static int i915_dma_cleanup(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int i;
/* Make sure interrupts are disabled here because the uninstall ioctl
* may not have been called from userspace and after dev_private
* is freed, it's too late.
*/
if (dev->irq_enabled)
drm_irq_uninstall(dev);
mutex_lock(&dev->struct_mutex);
for (i = 0; i < I915_NUM_RINGS; i++)
intel_cleanup_ring_buffer(&dev_priv->ring[i]);
mutex_unlock(&dev->struct_mutex);
/* Clear the HWS virtual address at teardown */
if (I915_NEED_GFX_HWS(dev))
i915_free_hws(dev);
return 0;
}
static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
drm/i915: Initialise ring vfuncs for old DRI paths We weren't setting up the vfunc table when initialising the old DRI ringbuffer, leading to such OOPSes as: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 10c441067 PUD 1185e5067 PMD 0 Oops: 0010 [#1] PREEMPT SMP last sysfs file: /sys/class/dmi/id/chassis_asset_tag CPU 3 Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6 nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device processor parport_pc thermal snd thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801 rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod ata_piix libata scsi_mod unix Jan 18 15:49:29 lithui kernel: Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product Name RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0018:ffff8801150d1d40 EFLAGS: 00010202 RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704 RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800 RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444 R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800 R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8 FS: 00007f1038d456e0(0000) GS:ffff880001780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task ffff88011b016e40) Stack: ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000 <0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008 <0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8 Call Trace: [<ffffffffa043b8e6>] ? intel_ring_advance+0x16/0x20 [i915] [<ffffffffa041768b>] i915_irq_emit+0x15b/0x240 [i915] [<ffffffffa03ea7b1>] drm_ioctl+0x1f1/0x460 [drm] [<ffffffffa0417530>] ? i915_irq_emit+0x0/0x240 [i915] [<ffffffff810dd8f1>] ? do_sync_read+0xd1/0x120 [<ffffffff81025b1f>] ? do_page_fault+0x1df/0x3d0 [<ffffffff810ed5c7>] do_vfs_ioctl+0x97/0x550 [<ffffffff8115c2ea>] ? security_file_permission+0x7a/0x90 [<ffffffff810edb19>] sys_ioctl+0x99/0xa0 [<ffffffff810024ab>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [<(null)>] (null) RSP <ffff8801150d1d40> CR2: 0000000000000000 Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Herbert Xu <herbert@gondor.apana.org.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-01-20 17:57:11 +08:00
int ret;
master_priv->sarea = drm_getsarea(dev);
if (master_priv->sarea) {
master_priv->sarea_priv = (drm_i915_sarea_t *)
((u8 *)master_priv->sarea->handle + init->sarea_priv_offset);
} else {
DRM_DEBUG_DRIVER("sarea not found assuming DRI2 userspace\n");
}
if (init->ring_size != 0) {
drm/i915: Initialise ring vfuncs for old DRI paths We weren't setting up the vfunc table when initialising the old DRI ringbuffer, leading to such OOPSes as: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 10c441067 PUD 1185e5067 PMD 0 Oops: 0010 [#1] PREEMPT SMP last sysfs file: /sys/class/dmi/id/chassis_asset_tag CPU 3 Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6 nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device processor parport_pc thermal snd thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801 rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod ata_piix libata scsi_mod unix Jan 18 15:49:29 lithui kernel: Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product Name RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0018:ffff8801150d1d40 EFLAGS: 00010202 RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704 RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800 RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444 R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800 R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8 FS: 00007f1038d456e0(0000) GS:ffff880001780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task ffff88011b016e40) Stack: ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000 <0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008 <0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8 Call Trace: [<ffffffffa043b8e6>] ? intel_ring_advance+0x16/0x20 [i915] [<ffffffffa041768b>] i915_irq_emit+0x15b/0x240 [i915] [<ffffffffa03ea7b1>] drm_ioctl+0x1f1/0x460 [drm] [<ffffffffa0417530>] ? i915_irq_emit+0x0/0x240 [i915] [<ffffffff810dd8f1>] ? do_sync_read+0xd1/0x120 [<ffffffff81025b1f>] ? do_page_fault+0x1df/0x3d0 [<ffffffff810ed5c7>] do_vfs_ioctl+0x97/0x550 [<ffffffff8115c2ea>] ? security_file_permission+0x7a/0x90 [<ffffffff810edb19>] sys_ioctl+0x99/0xa0 [<ffffffff810024ab>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [<(null)>] (null) RSP <ffff8801150d1d40> CR2: 0000000000000000 Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Herbert Xu <herbert@gondor.apana.org.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-01-20 17:57:11 +08:00
if (LP_RING(dev_priv)->obj != NULL) {
i915_dma_cleanup(dev);
DRM_ERROR("Client tried to initialize ringbuffer in "
"GEM mode\n");
return -EINVAL;
}
drm/i915: Initialise ring vfuncs for old DRI paths We weren't setting up the vfunc table when initialising the old DRI ringbuffer, leading to such OOPSes as: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 10c441067 PUD 1185e5067 PMD 0 Oops: 0010 [#1] PREEMPT SMP last sysfs file: /sys/class/dmi/id/chassis_asset_tag CPU 3 Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6 nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device processor parport_pc thermal snd thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801 rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod ata_piix libata scsi_mod unix Jan 18 15:49:29 lithui kernel: Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product Name RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0018:ffff8801150d1d40 EFLAGS: 00010202 RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704 RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800 RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444 R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800 R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8 FS: 00007f1038d456e0(0000) GS:ffff880001780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task ffff88011b016e40) Stack: ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000 <0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008 <0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8 Call Trace: [<ffffffffa043b8e6>] ? intel_ring_advance+0x16/0x20 [i915] [<ffffffffa041768b>] i915_irq_emit+0x15b/0x240 [i915] [<ffffffffa03ea7b1>] drm_ioctl+0x1f1/0x460 [drm] [<ffffffffa0417530>] ? i915_irq_emit+0x0/0x240 [i915] [<ffffffff810dd8f1>] ? do_sync_read+0xd1/0x120 [<ffffffff81025b1f>] ? do_page_fault+0x1df/0x3d0 [<ffffffff810ed5c7>] do_vfs_ioctl+0x97/0x550 [<ffffffff8115c2ea>] ? security_file_permission+0x7a/0x90 [<ffffffff810edb19>] sys_ioctl+0x99/0xa0 [<ffffffff810024ab>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [<(null)>] (null) RSP <ffff8801150d1d40> CR2: 0000000000000000 Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Herbert Xu <herbert@gondor.apana.org.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-01-20 17:57:11 +08:00
ret = intel_render_ring_init_dri(dev,
init->ring_start,
init->ring_size);
if (ret) {
i915_dma_cleanup(dev);
drm/i915: Initialise ring vfuncs for old DRI paths We weren't setting up the vfunc table when initialising the old DRI ringbuffer, leading to such OOPSes as: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 10c441067 PUD 1185e5067 PMD 0 Oops: 0010 [#1] PREEMPT SMP last sysfs file: /sys/class/dmi/id/chassis_asset_tag CPU 3 Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6 nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device processor parport_pc thermal snd thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801 rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod ata_piix libata scsi_mod unix Jan 18 15:49:29 lithui kernel: Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product Name RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0018:ffff8801150d1d40 EFLAGS: 00010202 RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704 RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800 RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444 R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800 R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8 FS: 00007f1038d456e0(0000) GS:ffff880001780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task ffff88011b016e40) Stack: ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000 <0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008 <0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8 Call Trace: [<ffffffffa043b8e6>] ? intel_ring_advance+0x16/0x20 [i915] [<ffffffffa041768b>] i915_irq_emit+0x15b/0x240 [i915] [<ffffffffa03ea7b1>] drm_ioctl+0x1f1/0x460 [drm] [<ffffffffa0417530>] ? i915_irq_emit+0x0/0x240 [i915] [<ffffffff810dd8f1>] ? do_sync_read+0xd1/0x120 [<ffffffff81025b1f>] ? do_page_fault+0x1df/0x3d0 [<ffffffff810ed5c7>] do_vfs_ioctl+0x97/0x550 [<ffffffff8115c2ea>] ? security_file_permission+0x7a/0x90 [<ffffffff810edb19>] sys_ioctl+0x99/0xa0 [<ffffffff810024ab>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [<(null)>] (null) RSP <ffff8801150d1d40> CR2: 0000000000000000 Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Herbert Xu <herbert@gondor.apana.org.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-01-20 17:57:11 +08:00
return ret;
}
}
dev_priv->cpp = init->cpp;
dev_priv->back_offset = init->back_offset;
dev_priv->front_offset = init->front_offset;
dev_priv->current_page = 0;
if (master_priv->sarea_priv)
master_priv->sarea_priv->pf_current_page = 0;
/* Allow hardware batchbuffers unless told otherwise.
*/
dev_priv->allow_batchbuffer = 1;
return 0;
}
static int i915_dma_resume(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct intel_ring_buffer *ring = LP_RING(dev_priv);
DRM_DEBUG_DRIVER("%s\n", __func__);
if (ring->map.handle == NULL) {
DRM_ERROR("can not ioremap virtual address for"
" ring buffer\n");
return -ENOMEM;
}
/* Program Hardware Status Page */
if (!ring->status_page.page_addr) {
DRM_ERROR("Can not find hardware status page\n");
return -EINVAL;
}
DRM_DEBUG_DRIVER("hw status page @ %p\n",
ring->status_page.page_addr);
if (ring->status_page.gfx_addr != 0)
intel_ring_setup_status_page(ring);
else
i915_write_hws_pga(dev);
DRM_DEBUG_DRIVER("Enabled hardware status page\n");
return 0;
}
static int i915_dma_init(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_init_t *init = data;
int retcode = 0;
switch (init->func) {
case I915_INIT_DMA:
retcode = i915_initialize(dev, init);
break;
case I915_CLEANUP_DMA:
retcode = i915_dma_cleanup(dev);
break;
case I915_RESUME_DMA:
retcode = i915_dma_resume(dev);
break;
default:
retcode = -EINVAL;
break;
}
return retcode;
}
/* Implement basically the same security restrictions as hardware does
* for MI_BATCH_NON_SECURE. These can be made stricter at any time.
*
* Most of the calculations below involve calculating the size of a
* particular instruction. It's important to get the size right as
* that tells us where the next instruction to check is. Any illegal
* instruction detected will be given a size of zero, which is a
* signal to abort the rest of the buffer.
*/
static int validate_cmd(int cmd)
{
switch (((cmd >> 29) & 0x7)) {
case 0x0:
switch ((cmd >> 23) & 0x3f) {
case 0x0:
return 1; /* MI_NOOP */
case 0x4:
return 1; /* MI_FLUSH */
default:
return 0; /* disallow everything else */
}
break;
case 0x1:
return 0; /* reserved */
case 0x2:
return (cmd & 0xff) + 2; /* 2d commands */
case 0x3:
if (((cmd >> 24) & 0x1f) <= 0x18)
return 1;
switch ((cmd >> 24) & 0x1f) {
case 0x1c:
return 1;
case 0x1d:
switch ((cmd >> 16) & 0xff) {
case 0x3:
return (cmd & 0x1f) + 2;
case 0x4:
return (cmd & 0xf) + 2;
default:
return (cmd & 0xffff) + 2;
}
case 0x1e:
if (cmd & (1 << 23))
return (cmd & 0xffff) + 1;
else
return 1;
case 0x1f:
if ((cmd & (1 << 23)) == 0) /* inline vertices */
return (cmd & 0x1ffff) + 2;
else if (cmd & (1 << 17)) /* indirect random */
if ((cmd & 0xffff) == 0)
return 0; /* unknown length, too hard */
else
return (((cmd & 0xffff) + 1) / 2) + 1;
else
return 2; /* indirect sequential */
default:
return 0;
}
default:
return 0;
}
return 0;
}
static int i915_emit_cmds(struct drm_device * dev, int *buffer, int dwords)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int i, ret;
if ((dwords+1) * sizeof(int) >= LP_RING(dev_priv)->size - 8)
return -EINVAL;
for (i = 0; i < dwords;) {
int sz = validate_cmd(buffer[i]);
if (sz == 0 || i + sz > dwords)
return -EINVAL;
i += sz;
}
ret = BEGIN_LP_RING((dwords+1)&~1);
if (ret)
return ret;
for (i = 0; i < dwords; i++)
OUT_RING(buffer[i]);
if (dwords & 1)
OUT_RING(0);
ADVANCE_LP_RING();
return 0;
}
int
i915_emit_box(struct drm_device *dev,
struct drm_clip_rect *box,
int DR1, int DR4)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
if (box->y2 <= box->y1 || box->x2 <= box->x1 ||
box->y2 <= 0 || box->x2 <= 0) {
DRM_ERROR("Bad box %d,%d..%d,%d\n",
box->x1, box->y1, box->x2, box->y2);
return -EINVAL;
}
if (INTEL_INFO(dev)->gen >= 4) {
ret = BEGIN_LP_RING(4);
if (ret)
return ret;
OUT_RING(GFX_OP_DRAWRECT_INFO_I965);
OUT_RING((box->x1 & 0xffff) | (box->y1 << 16));
OUT_RING(((box->x2 - 1) & 0xffff) | ((box->y2 - 1) << 16));
OUT_RING(DR4);
} else {
ret = BEGIN_LP_RING(6);
if (ret)
return ret;
OUT_RING(GFX_OP_DRAWRECT_INFO);
OUT_RING(DR1);
OUT_RING((box->x1 & 0xffff) | (box->y1 << 16));
OUT_RING(((box->x2 - 1) & 0xffff) | ((box->y2 - 1) << 16));
OUT_RING(DR4);
OUT_RING(0);
}
ADVANCE_LP_RING();
return 0;
}
/* XXX: Emitting the counter should really be moved to part of the IRQ
* emit. For now, do it in both places:
*/
static void i915_emit_breadcrumb(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
dev_priv->counter++;
if (dev_priv->counter > 0x7FFFFFFFUL)
dev_priv->counter = 0;
if (master_priv->sarea_priv)
master_priv->sarea_priv->last_enqueue = dev_priv->counter;
if (BEGIN_LP_RING(4) == 0) {
OUT_RING(MI_STORE_DWORD_INDEX);
OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
OUT_RING(dev_priv->counter);
OUT_RING(0);
ADVANCE_LP_RING();
}
}
static int i915_dispatch_cmdbuffer(struct drm_device * dev,
drm_i915_cmdbuffer_t *cmd,
struct drm_clip_rect *cliprects,
void *cmdbuf)
{
int nbox = cmd->num_cliprects;
int i = 0, count, ret;
if (cmd->sz & 0x3) {
DRM_ERROR("alignment");
return -EINVAL;
}
i915_kernel_lost_context(dev);
count = nbox ? nbox : 1;
for (i = 0; i < count; i++) {
if (i < nbox) {
ret = i915_emit_box(dev, &cliprects[i],
cmd->DR1, cmd->DR4);
if (ret)
return ret;
}
ret = i915_emit_cmds(dev, cmdbuf, cmd->sz / 4);
if (ret)
return ret;
}
i915_emit_breadcrumb(dev);
return 0;
}
static int i915_dispatch_batchbuffer(struct drm_device * dev,
drm_i915_batchbuffer_t * batch,
struct drm_clip_rect *cliprects)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int nbox = batch->num_cliprects;
int i, count, ret;
if ((batch->start | batch->used) & 0x7) {
DRM_ERROR("alignment");
return -EINVAL;
}
i915_kernel_lost_context(dev);
count = nbox ? nbox : 1;
for (i = 0; i < count; i++) {
if (i < nbox) {
ret = i915_emit_box(dev, &cliprects[i],
batch->DR1, batch->DR4);
if (ret)
return ret;
}
if (!IS_I830(dev) && !IS_845G(dev)) {
ret = BEGIN_LP_RING(2);
if (ret)
return ret;
if (INTEL_INFO(dev)->gen >= 4) {
OUT_RING(MI_BATCH_BUFFER_START | (2 << 6) | MI_BATCH_NON_SECURE_I965);
OUT_RING(batch->start);
} else {
OUT_RING(MI_BATCH_BUFFER_START | (2 << 6));
OUT_RING(batch->start | MI_BATCH_NON_SECURE);
}
} else {
ret = BEGIN_LP_RING(4);
if (ret)
return ret;
OUT_RING(MI_BATCH_BUFFER);
OUT_RING(batch->start | MI_BATCH_NON_SECURE);
OUT_RING(batch->start + batch->used - 4);
OUT_RING(0);
}
ADVANCE_LP_RING();
}
if (IS_G4X(dev) || IS_GEN5(dev)) {
if (BEGIN_LP_RING(2) == 0) {
OUT_RING(MI_FLUSH | MI_NO_WRITE_FLUSH | MI_INVALIDATE_ISP);
OUT_RING(MI_NOOP);
ADVANCE_LP_RING();
}
}
i915_emit_breadcrumb(dev);
return 0;
}
static int i915_dispatch_flip(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv =
dev->primary->master->driver_priv;
int ret;
if (!master_priv->sarea_priv)
return -EINVAL;
DRM_DEBUG_DRIVER("%s: page=%d pfCurrentPage=%d\n",
__func__,
dev_priv->current_page,
master_priv->sarea_priv->pf_current_page);
i915_kernel_lost_context(dev);
ret = BEGIN_LP_RING(10);
if (ret)
return ret;
OUT_RING(MI_FLUSH | MI_READ_FLUSH);
OUT_RING(0);
OUT_RING(CMD_OP_DISPLAYBUFFER_INFO | ASYNC_FLIP);
OUT_RING(0);
if (dev_priv->current_page == 0) {
OUT_RING(dev_priv->back_offset);
dev_priv->current_page = 1;
} else {
OUT_RING(dev_priv->front_offset);
dev_priv->current_page = 0;
}
OUT_RING(0);
OUT_RING(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_PLANE_A_FLIP);
OUT_RING(0);
ADVANCE_LP_RING();
master_priv->sarea_priv->last_enqueue = dev_priv->counter++;
if (BEGIN_LP_RING(4) == 0) {
OUT_RING(MI_STORE_DWORD_INDEX);
OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
OUT_RING(dev_priv->counter);
OUT_RING(0);
ADVANCE_LP_RING();
}
master_priv->sarea_priv->pf_current_page = dev_priv->current_page;
return 0;
}
static int i915_quiescent(struct drm_device *dev)
{
struct intel_ring_buffer *ring = LP_RING(dev->dev_private);
i915_kernel_lost_context(dev);
return intel_wait_ring_idle(ring);
}
static int i915_flush_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
int ret;
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
mutex_lock(&dev->struct_mutex);
ret = i915_quiescent(dev);
mutex_unlock(&dev->struct_mutex);
return ret;
}
static int i915_batchbuffer(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *)
master_priv->sarea_priv;
drm_i915_batchbuffer_t *batch = data;
int ret;
struct drm_clip_rect *cliprects = NULL;
if (!dev_priv->allow_batchbuffer) {
DRM_ERROR("Batchbuffer ioctl disabled\n");
return -EINVAL;
}
DRM_DEBUG_DRIVER("i915 batchbuffer, start %x used %d cliprects %d\n",
batch->start, batch->used, batch->num_cliprects);
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
if (batch->num_cliprects < 0)
return -EINVAL;
if (batch->num_cliprects) {
cliprects = kcalloc(batch->num_cliprects,
sizeof(struct drm_clip_rect),
GFP_KERNEL);
if (cliprects == NULL)
return -ENOMEM;
ret = copy_from_user(cliprects, batch->cliprects,
batch->num_cliprects *
sizeof(struct drm_clip_rect));
if (ret != 0) {
ret = -EFAULT;
goto fail_free;
}
}
mutex_lock(&dev->struct_mutex);
ret = i915_dispatch_batchbuffer(dev, batch, cliprects);
mutex_unlock(&dev->struct_mutex);
if (sarea_priv)
sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
fail_free:
kfree(cliprects);
return ret;
}
static int i915_cmdbuffer(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *)
master_priv->sarea_priv;
drm_i915_cmdbuffer_t *cmdbuf = data;
struct drm_clip_rect *cliprects = NULL;
void *batch_data;
int ret;
DRM_DEBUG_DRIVER("i915 cmdbuffer, buf %p sz %d cliprects %d\n",
cmdbuf->buf, cmdbuf->sz, cmdbuf->num_cliprects);
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
if (cmdbuf->num_cliprects < 0)
return -EINVAL;
batch_data = kmalloc(cmdbuf->sz, GFP_KERNEL);
if (batch_data == NULL)
return -ENOMEM;
ret = copy_from_user(batch_data, cmdbuf->buf, cmdbuf->sz);
if (ret != 0) {
ret = -EFAULT;
goto fail_batch_free;
}
if (cmdbuf->num_cliprects) {
cliprects = kcalloc(cmdbuf->num_cliprects,
sizeof(struct drm_clip_rect), GFP_KERNEL);
if (cliprects == NULL) {
ret = -ENOMEM;
goto fail_batch_free;
}
ret = copy_from_user(cliprects, cmdbuf->cliprects,
cmdbuf->num_cliprects *
sizeof(struct drm_clip_rect));
if (ret != 0) {
ret = -EFAULT;
goto fail_clip_free;
}
}
mutex_lock(&dev->struct_mutex);
ret = i915_dispatch_cmdbuffer(dev, cmdbuf, cliprects, batch_data);
mutex_unlock(&dev->struct_mutex);
if (ret) {
DRM_ERROR("i915_dispatch_cmdbuffer failed\n");
goto fail_clip_free;
}
if (sarea_priv)
sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
fail_clip_free:
kfree(cliprects);
fail_batch_free:
kfree(batch_data);
return ret;
}
static int i915_flip_bufs(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
int ret;
DRM_DEBUG_DRIVER("%s\n", __func__);
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
mutex_lock(&dev->struct_mutex);
ret = i915_dispatch_flip(dev);
mutex_unlock(&dev->struct_mutex);
return ret;
}
static int i915_getparam(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_getparam_t *param = data;
int value;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
switch (param->param) {
case I915_PARAM_IRQ_ACTIVE:
value = dev->pdev->irq ? 1 : 0;
break;
case I915_PARAM_ALLOW_BATCHBUFFER:
value = dev_priv->allow_batchbuffer ? 1 : 0;
break;
case I915_PARAM_LAST_DISPATCH:
value = READ_BREADCRUMB(dev_priv);
break;
case I915_PARAM_CHIPSET_ID:
value = dev->pci_device;
break;
case I915_PARAM_HAS_GEM:
value = dev_priv->has_gem;
break;
case I915_PARAM_NUM_FENCES_AVAIL:
value = dev_priv->num_fence_regs - dev_priv->fence_reg_start;
break;
case I915_PARAM_HAS_OVERLAY:
value = dev_priv->overlay ? 1 : 0;
break;
case I915_PARAM_HAS_PAGEFLIPPING:
value = 1;
break;
case I915_PARAM_HAS_EXECBUF2:
/* depends on GEM */
value = dev_priv->has_gem;
break;
case I915_PARAM_HAS_BSD:
value = HAS_BSD(dev);
break;
case I915_PARAM_HAS_BLT:
value = HAS_BLT(dev);
break;
case I915_PARAM_HAS_RELAXED_FENCING:
value = 1;
break;
case I915_PARAM_HAS_COHERENT_RINGS:
value = 1;
break;
case I915_PARAM_HAS_EXEC_CONSTANTS:
value = INTEL_INFO(dev)->gen >= 4;
break;
case I915_PARAM_HAS_RELAXED_DELTA:
value = 1;
break;
case I915_PARAM_HAS_GEN7_SOL_RESET:
value = 1;
break;
case I915_PARAM_HAS_LLC:
value = HAS_LLC(dev);
break;
default:
DRM_DEBUG_DRIVER("Unknown parameter %d\n",
param->param);
return -EINVAL;
}
if (DRM_COPY_TO_USER(param->value, &value, sizeof(int))) {
DRM_ERROR("DRM_COPY_TO_USER failed\n");
return -EFAULT;
}
return 0;
}
static int i915_setparam(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_setparam_t *param = data;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
switch (param->param) {
case I915_SETPARAM_USE_MI_BATCHBUFFER_START:
break;
case I915_SETPARAM_TEX_LRU_LOG_GRANULARITY:
dev_priv->tex_lru_log_granularity = param->value;
break;
case I915_SETPARAM_ALLOW_BATCHBUFFER:
dev_priv->allow_batchbuffer = param->value;
break;
case I915_SETPARAM_NUM_USED_FENCES:
if (param->value > dev_priv->num_fence_regs ||
param->value < 0)
return -EINVAL;
/* Userspace can use first N regs */
dev_priv->fence_reg_start = param->value;
break;
default:
DRM_DEBUG_DRIVER("unknown parameter %d\n",
param->param);
return -EINVAL;
}
return 0;
}
static int i915_set_status_page(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_hws_addr_t *hws = data;
struct intel_ring_buffer *ring = LP_RING(dev_priv);
if (!I915_NEED_GFX_HWS(dev))
return -EINVAL;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
WARN(1, "tried to set status page when mode setting active\n");
return 0;
}
DRM_DEBUG_DRIVER("set status page addr 0x%08x\n", (u32)hws->addr);
ring->status_page.gfx_addr = hws->addr & (0x1ffff<<12);
dev_priv->hws_map.offset = dev->agp->base + hws->addr;
dev_priv->hws_map.size = 4*1024;
dev_priv->hws_map.type = 0;
dev_priv->hws_map.flags = 0;
dev_priv->hws_map.mtrr = 0;
drm_core_ioremap_wc(&dev_priv->hws_map, dev);
if (dev_priv->hws_map.handle == NULL) {
i915_dma_cleanup(dev);
ring->status_page.gfx_addr = 0;
DRM_ERROR("can not ioremap virtual address for"
" G33 hw status page\n");
return -ENOMEM;
}
ring->status_page.page_addr =
(void __force __iomem *)dev_priv->hws_map.handle;
memset_io(ring->status_page.page_addr, 0, PAGE_SIZE);
I915_WRITE(HWS_PGA, ring->status_page.gfx_addr);
DRM_DEBUG_DRIVER("load hws HWS_PGA with gfx mem 0x%x\n",
ring->status_page.gfx_addr);
DRM_DEBUG_DRIVER("load hws at %p\n",
ring->status_page.page_addr);
return 0;
}
static int i915_get_bridge_dev(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
if (!dev_priv->bridge_dev) {
DRM_ERROR("bridge device not found\n");
return -1;
}
return 0;
}
#define MCHBAR_I915 0x44
#define MCHBAR_I965 0x48
#define MCHBAR_SIZE (4*4096)
#define DEVEN_REG 0x54
#define DEVEN_MCHBAR_EN (1 << 28)
/* Allocate space for the MCH regs if needed, return nonzero on error */
static int
intel_alloc_mchbar_resource(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
u32 temp_lo, temp_hi = 0;
u64 mchbar_addr;
int ret;
if (INTEL_INFO(dev)->gen >= 4)
pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi);
pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo);
mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
/* If ACPI doesn't have it, assume we need to allocate it ourselves */
#ifdef CONFIG_PNP
if (mchbar_addr &&
pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE))
return 0;
#endif
/* Get some space for it */
dev_priv->mch_res.name = "i915 MCHBAR";
dev_priv->mch_res.flags = IORESOURCE_MEM;
ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus,
&dev_priv->mch_res,
MCHBAR_SIZE, MCHBAR_SIZE,
PCIBIOS_MIN_MEM,
0, pcibios_align_resource,
dev_priv->bridge_dev);
if (ret) {
DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret);
dev_priv->mch_res.start = 0;
return ret;
}
if (INTEL_INFO(dev)->gen >= 4)
pci_write_config_dword(dev_priv->bridge_dev, reg + 4,
upper_32_bits(dev_priv->mch_res.start));
pci_write_config_dword(dev_priv->bridge_dev, reg,
lower_32_bits(dev_priv->mch_res.start));
return 0;
}
/* Setup MCHBAR if possible, return true if we should disable it again */
static void
intel_setup_mchbar(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
u32 temp;
bool enabled;
dev_priv->mchbar_need_disable = false;
if (IS_I915G(dev) || IS_I915GM(dev)) {
pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
enabled = !!(temp & DEVEN_MCHBAR_EN);
} else {
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
enabled = temp & 1;
}
/* If it's already enabled, don't have to do anything */
if (enabled)
return;
if (intel_alloc_mchbar_resource(dev))
return;
dev_priv->mchbar_need_disable = true;
/* Space is allocated or reserved, so enable it. */
if (IS_I915G(dev) || IS_I915GM(dev)) {
pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG,
temp | DEVEN_MCHBAR_EN);
} else {
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1);
}
}
static void
intel_teardown_mchbar(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
u32 temp;
if (dev_priv->mchbar_need_disable) {
if (IS_I915G(dev) || IS_I915GM(dev)) {
pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
temp &= ~DEVEN_MCHBAR_EN;
pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG, temp);
} else {
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
temp &= ~1;
pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp);
}
}
if (dev_priv->mch_res.start)
release_resource(&dev_priv->mch_res);
}
#define PTE_ADDRESS_MASK 0xfffff000
#define PTE_ADDRESS_MASK_HIGH 0x000000f0 /* i915+ */
#define PTE_MAPPING_TYPE_UNCACHED (0 << 1)
#define PTE_MAPPING_TYPE_DCACHE (1 << 1) /* i830 only */
#define PTE_MAPPING_TYPE_CACHED (3 << 1)
#define PTE_MAPPING_TYPE_MASK (3 << 1)
#define PTE_VALID (1 << 0)
/**
* i915_stolen_to_phys - take an offset into stolen memory and turn it into
* a physical one
* @dev: drm device
* @offset: address to translate
*
* Some chip functions require allocations from stolen space and need the
* physical address of the memory in question.
*/
static unsigned long i915_stolen_to_phys(struct drm_device *dev, u32 offset)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct pci_dev *pdev = dev_priv->bridge_dev;
u32 base;
#if 0
/* On the machines I have tested the Graphics Base of Stolen Memory
* is unreliable, so compute the base by subtracting the stolen memory
* from the Top of Low Usable DRAM which is where the BIOS places
* the graphics stolen memory.
*/
if (INTEL_INFO(dev)->gen > 3 || IS_G33(dev)) {
/* top 32bits are reserved = 0 */
pci_read_config_dword(pdev, 0xA4, &base);
} else {
/* XXX presume 8xx is the same as i915 */
pci_bus_read_config_dword(pdev->bus, 2, 0x5C, &base);
}
#else
if (INTEL_INFO(dev)->gen > 3 || IS_G33(dev)) {
u16 val;
pci_read_config_word(pdev, 0xb0, &val);
base = val >> 4 << 20;
} else {
u8 val;
pci_read_config_byte(pdev, 0x9c, &val);
base = val >> 3 << 27;
}
base -= dev_priv->mm.gtt->stolen_size;
#endif
return base + offset;
}
static void i915_warn_stolen(struct drm_device *dev)
{
DRM_ERROR("not enough stolen space for compressed buffer, disabling\n");
DRM_ERROR("hint: you may be able to increase stolen memory size in the BIOS to avoid this\n");
}
static void i915_setup_compression(struct drm_device *dev, int size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_mm_node *compressed_fb, *uninitialized_var(compressed_llb);
unsigned long cfb_base;
unsigned long ll_base = 0;
/* Just in case the BIOS is doing something questionable. */
intel_disable_fbc(dev);
compressed_fb = drm_mm_search_free(&dev_priv->mm.stolen, size, 4096, 0);
if (compressed_fb)
compressed_fb = drm_mm_get_block(compressed_fb, size, 4096);
if (!compressed_fb)
goto err;
cfb_base = i915_stolen_to_phys(dev, compressed_fb->start);
if (!cfb_base)
goto err_fb;
if (!(IS_GM45(dev) || HAS_PCH_SPLIT(dev))) {
compressed_llb = drm_mm_search_free(&dev_priv->mm.stolen,
4096, 4096, 0);
if (compressed_llb)
compressed_llb = drm_mm_get_block(compressed_llb,
4096, 4096);
if (!compressed_llb)
goto err_fb;
ll_base = i915_stolen_to_phys(dev, compressed_llb->start);
if (!ll_base)
goto err_llb;
}
dev_priv->cfb_size = size;
dev_priv->compressed_fb = compressed_fb;
if (HAS_PCH_SPLIT(dev))
I915_WRITE(ILK_DPFC_CB_BASE, compressed_fb->start);
else if (IS_GM45(dev)) {
I915_WRITE(DPFC_CB_BASE, compressed_fb->start);
} else {
I915_WRITE(FBC_CFB_BASE, cfb_base);
I915_WRITE(FBC_LL_BASE, ll_base);
dev_priv->compressed_llb = compressed_llb;
}
DRM_DEBUG_KMS("FBC base 0x%08lx, ll base 0x%08lx, size %dM\n",
cfb_base, ll_base, size >> 20);
return;
err_llb:
drm_mm_put_block(compressed_llb);
err_fb:
drm_mm_put_block(compressed_fb);
err:
dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
i915_warn_stolen(dev);
}
static void i915_cleanup_compression(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
drm_mm_put_block(dev_priv->compressed_fb);
if (dev_priv->compressed_llb)
drm_mm_put_block(dev_priv->compressed_llb);
}
/* true = enable decode, false = disable decoder */
static unsigned int i915_vga_set_decode(void *cookie, bool state)
{
struct drm_device *dev = cookie;
intel_modeset_vga_set_state(dev, state);
if (state)
return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
else
return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_state state)
{
struct drm_device *dev = pci_get_drvdata(pdev);
pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
if (state == VGA_SWITCHEROO_ON) {
printk(KERN_INFO "i915: switched on\n");
dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
/* i915 resume handler doesn't set to D0 */
pci_set_power_state(dev->pdev, PCI_D0);
i915_resume(dev);
dev->switch_power_state = DRM_SWITCH_POWER_ON;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
} else {
printk(KERN_ERR "i915: switched off\n");
dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
i915_suspend(dev, pmm);
dev->switch_power_state = DRM_SWITCH_POWER_OFF;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
}
}
static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
{
struct drm_device *dev = pci_get_drvdata(pdev);
bool can_switch;
spin_lock(&dev->count_lock);
can_switch = (dev->open_count == 0);
spin_unlock(&dev->count_lock);
return can_switch;
}
static int i915_load_gem_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long prealloc_size, gtt_size, mappable_size;
int ret;
prealloc_size = dev_priv->mm.gtt->stolen_size;
gtt_size = dev_priv->mm.gtt->gtt_total_entries << PAGE_SHIFT;
mappable_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
/* Basic memrange allocator for stolen space */
drm_mm_init(&dev_priv->mm.stolen, 0, prealloc_size);
mutex_lock(&dev->struct_mutex);
if (i915_enable_ppgtt && HAS_ALIASING_PPGTT(dev)) {
/* PPGTT pdes are stolen from global gtt ptes, so shrink the
* aperture accordingly when using aliasing ppgtt. */
gtt_size -= I915_PPGTT_PD_ENTRIES*PAGE_SIZE;
/* For paranoia keep the guard page in between. */
gtt_size -= PAGE_SIZE;
i915_gem_do_init(dev, 0, mappable_size, gtt_size);
ret = i915_gem_init_aliasing_ppgtt(dev);
if (ret)
return ret;
} else {
/* Let GEM Manage all of the aperture.
*
* However, leave one page at the end still bound to the scratch
* page. There are a number of places where the hardware
* apparently prefetches past the end of the object, and we've
* seen multiple hangs with the GPU head pointer stuck in a
* batchbuffer bound at the last page of the aperture. One page
* should be enough to keep any prefetching inside of the
* aperture.
*/
i915_gem_do_init(dev, 0, mappable_size, gtt_size - PAGE_SIZE);
}
ret = i915_gem_init_hw(dev);
mutex_unlock(&dev->struct_mutex);
if (ret) {
i915_gem_cleanup_aliasing_ppgtt(dev);
return ret;
}
/* Try to set up FBC with a reasonable compressed buffer size */
if (I915_HAS_FBC(dev) && i915_powersave) {
int cfb_size;
/* Leave 1M for line length buffer & misc. */
/* Try to get a 32M buffer... */
if (prealloc_size > (36*1024*1024))
cfb_size = 32*1024*1024;
else /* fall back to 7/8 of the stolen space */
cfb_size = prealloc_size * 7 / 8;
i915_setup_compression(dev, cfb_size);
}
/* Allow hardware batchbuffers unless told otherwise. */
dev_priv->allow_batchbuffer = 1;
return 0;
}
static int i915_load_modeset_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
ret = intel_parse_bios(dev);
if (ret)
DRM_INFO("failed to find VBIOS tables\n");
/* If we have > 1 VGA cards, then we need to arbitrate access
* to the common VGA resources.
*
* If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA),
* then we do not take part in VGA arbitration and the
* vga_client_register() fails with -ENODEV.
*/
ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
if (ret && ret != -ENODEV)
goto out;
intel_register_dsm_handler();
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
ret = vga_switcheroo_register_client(dev->pdev,
i915_switcheroo_set_state,
NULL,
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
i915_switcheroo_can_switch);
if (ret)
goto cleanup_vga_client;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
/* IIR "flip pending" bit means done if this bit is set */
if (IS_GEN3(dev) && (I915_READ(ECOSKPD) & ECO_FLIP_DONE))
dev_priv->flip_pending_is_done = true;
intel_modeset_init(dev);
ret = i915_load_gem_init(dev);
if (ret)
goto cleanup_vga_switcheroo;
intel_modeset_gem_init(dev);
ret = drm_irq_install(dev);
if (ret)
goto cleanup_gem;
/* Always safe in the mode setting case. */
/* FIXME: do pre/post-mode set stuff in core KMS code */
dev->vblank_disable_allowed = 1;
ret = intel_fbdev_init(dev);
if (ret)
goto cleanup_irq;
drm_kms_helper_poll_init(dev);
/* We're off and running w/KMS */
dev_priv->mm.suspended = 0;
return 0;
cleanup_irq:
drm_irq_uninstall(dev);
cleanup_gem:
mutex_lock(&dev->struct_mutex);
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
i915_gem_cleanup_aliasing_ppgtt(dev);
cleanup_vga_switcheroo:
vga_switcheroo_unregister_client(dev->pdev);
cleanup_vga_client:
vga_client_register(dev->pdev, NULL, NULL, NULL);
out:
return ret;
}
int i915_master_create(struct drm_device *dev, struct drm_master *master)
{
struct drm_i915_master_private *master_priv;
master_priv = kzalloc(sizeof(*master_priv), GFP_KERNEL);
if (!master_priv)
return -ENOMEM;
master->driver_priv = master_priv;
return 0;
}
void i915_master_destroy(struct drm_device *dev, struct drm_master *master)
{
struct drm_i915_master_private *master_priv = master->driver_priv;
if (!master_priv)
return;
kfree(master_priv);
master->driver_priv = NULL;
}
static void i915_pineview_get_mem_freq(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 tmp;
tmp = I915_READ(CLKCFG);
switch (tmp & CLKCFG_FSB_MASK) {
case CLKCFG_FSB_533:
dev_priv->fsb_freq = 533; /* 133*4 */
break;
case CLKCFG_FSB_800:
dev_priv->fsb_freq = 800; /* 200*4 */
break;
case CLKCFG_FSB_667:
dev_priv->fsb_freq = 667; /* 167*4 */
break;
case CLKCFG_FSB_400:
dev_priv->fsb_freq = 400; /* 100*4 */
break;
}
switch (tmp & CLKCFG_MEM_MASK) {
case CLKCFG_MEM_533:
dev_priv->mem_freq = 533;
break;
case CLKCFG_MEM_667:
dev_priv->mem_freq = 667;
break;
case CLKCFG_MEM_800:
dev_priv->mem_freq = 800;
break;
}
/* detect pineview DDR3 setting */
tmp = I915_READ(CSHRDDR3CTL);
dev_priv->is_ddr3 = (tmp & CSHRDDR3CTL_DDR3) ? 1 : 0;
}
static void i915_ironlake_get_mem_freq(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u16 ddrpll, csipll;
ddrpll = I915_READ16(DDRMPLL1);
csipll = I915_READ16(CSIPLL0);
switch (ddrpll & 0xff) {
case 0xc:
dev_priv->mem_freq = 800;
break;
case 0x10:
dev_priv->mem_freq = 1066;
break;
case 0x14:
dev_priv->mem_freq = 1333;
break;
case 0x18:
dev_priv->mem_freq = 1600;
break;
default:
DRM_DEBUG_DRIVER("unknown memory frequency 0x%02x\n",
ddrpll & 0xff);
dev_priv->mem_freq = 0;
break;
}
dev_priv->r_t = dev_priv->mem_freq;
switch (csipll & 0x3ff) {
case 0x00c:
dev_priv->fsb_freq = 3200;
break;
case 0x00e:
dev_priv->fsb_freq = 3733;
break;
case 0x010:
dev_priv->fsb_freq = 4266;
break;
case 0x012:
dev_priv->fsb_freq = 4800;
break;
case 0x014:
dev_priv->fsb_freq = 5333;
break;
case 0x016:
dev_priv->fsb_freq = 5866;
break;
case 0x018:
dev_priv->fsb_freq = 6400;
break;
default:
DRM_DEBUG_DRIVER("unknown fsb frequency 0x%04x\n",
csipll & 0x3ff);
dev_priv->fsb_freq = 0;
break;
}
if (dev_priv->fsb_freq == 3200) {
dev_priv->c_m = 0;
} else if (dev_priv->fsb_freq > 3200 && dev_priv->fsb_freq <= 4800) {
dev_priv->c_m = 1;
} else {
dev_priv->c_m = 2;
}
}
static const struct cparams {
u16 i;
u16 t;
u16 m;
u16 c;
} cparams[] = {
{ 1, 1333, 301, 28664 },
{ 1, 1066, 294, 24460 },
{ 1, 800, 294, 25192 },
{ 0, 1333, 276, 27605 },
{ 0, 1066, 276, 27605 },
{ 0, 800, 231, 23784 },
};
unsigned long i915_chipset_val(struct drm_i915_private *dev_priv)
{
u64 total_count, diff, ret;
u32 count1, count2, count3, m = 0, c = 0;
unsigned long now = jiffies_to_msecs(jiffies), diff1;
int i;
diff1 = now - dev_priv->last_time1;
/* Prevent division-by-zero if we are asking too fast.
* Also, we don't get interesting results if we are polling
* faster than once in 10ms, so just return the saved value
* in such cases.
*/
if (diff1 <= 10)
return dev_priv->chipset_power;
count1 = I915_READ(DMIEC);
count2 = I915_READ(DDREC);
count3 = I915_READ(CSIEC);
total_count = count1 + count2 + count3;
/* FIXME: handle per-counter overflow */
if (total_count < dev_priv->last_count1) {
diff = ~0UL - dev_priv->last_count1;
diff += total_count;
} else {
diff = total_count - dev_priv->last_count1;
}
for (i = 0; i < ARRAY_SIZE(cparams); i++) {
if (cparams[i].i == dev_priv->c_m &&
cparams[i].t == dev_priv->r_t) {
m = cparams[i].m;
c = cparams[i].c;
break;
}
}
diff = div_u64(diff, diff1);
ret = ((m * diff) + c);
ret = div_u64(ret, 10);
dev_priv->last_count1 = total_count;
dev_priv->last_time1 = now;
dev_priv->chipset_power = ret;
return ret;
}
unsigned long i915_mch_val(struct drm_i915_private *dev_priv)
{
unsigned long m, x, b;
u32 tsfs;
tsfs = I915_READ(TSFS);
m = ((tsfs & TSFS_SLOPE_MASK) >> TSFS_SLOPE_SHIFT);
x = I915_READ8(TR1);
b = tsfs & TSFS_INTR_MASK;
return ((m * x) / 127) - b;
}
static u16 pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid)
{
static const struct v_table {
u16 vd; /* in .1 mil */
u16 vm; /* in .1 mil */
} v_table[] = {
{ 0, 0, },
{ 375, 0, },
{ 500, 0, },
{ 625, 0, },
{ 750, 0, },
{ 875, 0, },
{ 1000, 0, },
{ 1125, 0, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4125, 3000, },
{ 4250, 3125, },
{ 4375, 3250, },
{ 4500, 3375, },
{ 4625, 3500, },
{ 4750, 3625, },
{ 4875, 3750, },
{ 5000, 3875, },
{ 5125, 4000, },
{ 5250, 4125, },
{ 5375, 4250, },
{ 5500, 4375, },
{ 5625, 4500, },
{ 5750, 4625, },
{ 5875, 4750, },
{ 6000, 4875, },
{ 6125, 5000, },
{ 6250, 5125, },
{ 6375, 5250, },
{ 6500, 5375, },
{ 6625, 5500, },
{ 6750, 5625, },
{ 6875, 5750, },
{ 7000, 5875, },
{ 7125, 6000, },
{ 7250, 6125, },
{ 7375, 6250, },
{ 7500, 6375, },
{ 7625, 6500, },
{ 7750, 6625, },
{ 7875, 6750, },
{ 8000, 6875, },
{ 8125, 7000, },
{ 8250, 7125, },
{ 8375, 7250, },
{ 8500, 7375, },
{ 8625, 7500, },
{ 8750, 7625, },
{ 8875, 7750, },
{ 9000, 7875, },
{ 9125, 8000, },
{ 9250, 8125, },
{ 9375, 8250, },
{ 9500, 8375, },
{ 9625, 8500, },
{ 9750, 8625, },
{ 9875, 8750, },
{ 10000, 8875, },
{ 10125, 9000, },
{ 10250, 9125, },
{ 10375, 9250, },
{ 10500, 9375, },
{ 10625, 9500, },
{ 10750, 9625, },
{ 10875, 9750, },
{ 11000, 9875, },
{ 11125, 10000, },
{ 11250, 10125, },
{ 11375, 10250, },
{ 11500, 10375, },
{ 11625, 10500, },
{ 11750, 10625, },
{ 11875, 10750, },
{ 12000, 10875, },
{ 12125, 11000, },
{ 12250, 11125, },
{ 12375, 11250, },
{ 12500, 11375, },
{ 12625, 11500, },
{ 12750, 11625, },
{ 12875, 11750, },
{ 13000, 11875, },
{ 13125, 12000, },
{ 13250, 12125, },
{ 13375, 12250, },
{ 13500, 12375, },
{ 13625, 12500, },
{ 13750, 12625, },
{ 13875, 12750, },
{ 14000, 12875, },
{ 14125, 13000, },
{ 14250, 13125, },
{ 14375, 13250, },
{ 14500, 13375, },
{ 14625, 13500, },
{ 14750, 13625, },
{ 14875, 13750, },
{ 15000, 13875, },
{ 15125, 14000, },
{ 15250, 14125, },
{ 15375, 14250, },
{ 15500, 14375, },
{ 15625, 14500, },
{ 15750, 14625, },
{ 15875, 14750, },
{ 16000, 14875, },
{ 16125, 15000, },
};
if (dev_priv->info->is_mobile)
return v_table[pxvid].vm;
else
return v_table[pxvid].vd;
}
void i915_update_gfx_val(struct drm_i915_private *dev_priv)
{
struct timespec now, diff1;
u64 diff;
unsigned long diffms;
u32 count;
getrawmonotonic(&now);
diff1 = timespec_sub(now, dev_priv->last_time2);
/* Don't divide by 0 */
diffms = diff1.tv_sec * 1000 + diff1.tv_nsec / 1000000;
if (!diffms)
return;
count = I915_READ(GFXEC);
if (count < dev_priv->last_count2) {
diff = ~0UL - dev_priv->last_count2;
diff += count;
} else {
diff = count - dev_priv->last_count2;
}
dev_priv->last_count2 = count;
dev_priv->last_time2 = now;
/* More magic constants... */
diff = diff * 1181;
diff = div_u64(diff, diffms * 10);
dev_priv->gfx_power = diff;
}
unsigned long i915_gfx_val(struct drm_i915_private *dev_priv)
{
unsigned long t, corr, state1, corr2, state2;
u32 pxvid, ext_v;
pxvid = I915_READ(PXVFREQ_BASE + (dev_priv->cur_delay * 4));
pxvid = (pxvid >> 24) & 0x7f;
ext_v = pvid_to_extvid(dev_priv, pxvid);
state1 = ext_v;
t = i915_mch_val(dev_priv);
/* Revel in the empirically derived constants */
/* Correction factor in 1/100000 units */
if (t > 80)
corr = ((t * 2349) + 135940);
else if (t >= 50)
corr = ((t * 964) + 29317);
else /* < 50 */
corr = ((t * 301) + 1004);
corr = corr * ((150142 * state1) / 10000 - 78642);
corr /= 100000;
corr2 = (corr * dev_priv->corr);
state2 = (corr2 * state1) / 10000;
state2 /= 100; /* convert to mW */
i915_update_gfx_val(dev_priv);
return dev_priv->gfx_power + state2;
}
/* Global for IPS driver to get at the current i915 device */
static struct drm_i915_private *i915_mch_dev;
/*
* Lock protecting IPS related data structures
* - i915_mch_dev
* - dev_priv->max_delay
* - dev_priv->min_delay
* - dev_priv->fmax
* - dev_priv->gpu_busy
*/
static DEFINE_SPINLOCK(mchdev_lock);
/**
* i915_read_mch_val - return value for IPS use
*
* Calculate and return a value for the IPS driver to use when deciding whether
* we have thermal and power headroom to increase CPU or GPU power budget.
*/
unsigned long i915_read_mch_val(void)
{
struct drm_i915_private *dev_priv;
unsigned long chipset_val, graphics_val, ret = 0;
spin_lock(&mchdev_lock);
if (!i915_mch_dev)
goto out_unlock;
dev_priv = i915_mch_dev;
chipset_val = i915_chipset_val(dev_priv);
graphics_val = i915_gfx_val(dev_priv);
ret = chipset_val + graphics_val;
out_unlock:
spin_unlock(&mchdev_lock);
return ret;
}
EXPORT_SYMBOL_GPL(i915_read_mch_val);
/**
* i915_gpu_raise - raise GPU frequency limit
*
* Raise the limit; IPS indicates we have thermal headroom.
*/
bool i915_gpu_raise(void)
{
struct drm_i915_private *dev_priv;
bool ret = true;
spin_lock(&mchdev_lock);
if (!i915_mch_dev) {
ret = false;
goto out_unlock;
}
dev_priv = i915_mch_dev;
if (dev_priv->max_delay > dev_priv->fmax)
dev_priv->max_delay--;
out_unlock:
spin_unlock(&mchdev_lock);
return ret;
}
EXPORT_SYMBOL_GPL(i915_gpu_raise);
/**
* i915_gpu_lower - lower GPU frequency limit
*
* IPS indicates we're close to a thermal limit, so throttle back the GPU
* frequency maximum.
*/
bool i915_gpu_lower(void)
{
struct drm_i915_private *dev_priv;
bool ret = true;
spin_lock(&mchdev_lock);
if (!i915_mch_dev) {
ret = false;
goto out_unlock;
}
dev_priv = i915_mch_dev;
if (dev_priv->max_delay < dev_priv->min_delay)
dev_priv->max_delay++;
out_unlock:
spin_unlock(&mchdev_lock);
return ret;
}
EXPORT_SYMBOL_GPL(i915_gpu_lower);
/**
* i915_gpu_busy - indicate GPU business to IPS
*
* Tell the IPS driver whether or not the GPU is busy.
*/
bool i915_gpu_busy(void)
{
struct drm_i915_private *dev_priv;
bool ret = false;
spin_lock(&mchdev_lock);
if (!i915_mch_dev)
goto out_unlock;
dev_priv = i915_mch_dev;
ret = dev_priv->busy;
out_unlock:
spin_unlock(&mchdev_lock);
return ret;
}
EXPORT_SYMBOL_GPL(i915_gpu_busy);
/**
* i915_gpu_turbo_disable - disable graphics turbo
*
* Disable graphics turbo by resetting the max frequency and setting the
* current frequency to the default.
*/
bool i915_gpu_turbo_disable(void)
{
struct drm_i915_private *dev_priv;
bool ret = true;
spin_lock(&mchdev_lock);
if (!i915_mch_dev) {
ret = false;
goto out_unlock;
}
dev_priv = i915_mch_dev;
dev_priv->max_delay = dev_priv->fstart;
if (!ironlake_set_drps(dev_priv->dev, dev_priv->fstart))
ret = false;
out_unlock:
spin_unlock(&mchdev_lock);
return ret;
}
EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable);
/**
* Tells the intel_ips driver that the i915 driver is now loaded, if
* IPS got loaded first.
*
* This awkward dance is so that neither module has to depend on the
* other in order for IPS to do the appropriate communication of
* GPU turbo limits to i915.
*/
static void
ips_ping_for_i915_load(void)
{
void (*link)(void);
link = symbol_get(ips_link_to_i915_driver);
if (link) {
link();
symbol_put(ips_link_to_i915_driver);
}
}
static void
i915_mtrr_setup(struct drm_i915_private *dev_priv, unsigned long base,
unsigned long size)
{
#if defined(CONFIG_X86_PAT)
if (cpu_has_pat)
return;
#endif
/* Set up a WC MTRR for non-PAT systems. This is more common than
* one would think, because the kernel disables PAT on first
* generation Core chips because WC PAT gets overridden by a UC
* MTRR if present. Even if a UC MTRR isn't present.
*/
dev_priv->mm.gtt_mtrr = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1);
if (dev_priv->mm.gtt_mtrr < 0) {
DRM_INFO("MTRR allocation failed. Graphics "
"performance may suffer.\n");
}
}
/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
* @flags: startup flags
*
* The driver load routine has to do several things:
* - drive output discovery via intel_modeset_init()
* - initialize the memory manager
* - allocate initial config memory
* - setup the DRM framebuffer with the allocated memory
*/
int i915_driver_load(struct drm_device *dev, unsigned long flags)
{
struct drm_i915_private *dev_priv;
int ret = 0, mmio_bar;
uint32_t agp_size;
/* i915 has 4 more counters */
dev->counters += 4;
dev->types[6] = _DRM_STAT_IRQ;
dev->types[7] = _DRM_STAT_PRIMARY;
dev->types[8] = _DRM_STAT_SECONDARY;
dev->types[9] = _DRM_STAT_DMA;
dev_priv = kzalloc(sizeof(drm_i915_private_t), GFP_KERNEL);
if (dev_priv == NULL)
return -ENOMEM;
dev->dev_private = (void *)dev_priv;
dev_priv->dev = dev;
dev_priv->info = (struct intel_device_info *) flags;
if (i915_get_bridge_dev(dev)) {
ret = -EIO;
goto free_priv;
}
pci_set_master(dev->pdev);
/* overlay on gen2 is broken and can't address above 1G */
if (IS_GEN2(dev))
dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(30));
/* 965GM sometimes incorrectly writes to hardware status page (HWS)
* using 32bit addressing, overwriting memory if HWS is located
* above 4GB.
*
* The documentation also mentions an issue with undefined
* behaviour if any general state is accessed within a page above 4GB,
* which also needs to be handled carefully.
*/
if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(32));
mmio_bar = IS_GEN2(dev) ? 1 : 0;
dev_priv->regs = pci_iomap(dev->pdev, mmio_bar, 0);
if (!dev_priv->regs) {
DRM_ERROR("failed to map registers\n");
ret = -EIO;
goto put_bridge;
}
dev_priv->mm.gtt = intel_gtt_get();
if (!dev_priv->mm.gtt) {
DRM_ERROR("Failed to initialize GTT\n");
ret = -ENODEV;
goto out_rmmap;
}
agp_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
dev_priv->mm.gtt_mapping =
io_mapping_create_wc(dev->agp->base, agp_size);
if (dev_priv->mm.gtt_mapping == NULL) {
ret = -EIO;
goto out_rmmap;
}
i915_mtrr_setup(dev_priv, dev->agp->base, agp_size);
/* The i915 workqueue is primarily used for batched retirement of
* requests (and thus managing bo) once the task has been completed
* by the GPU. i915_gem_retire_requests() is called directly when we
* need high-priority retirement, such as waiting for an explicit
* bo.
*
* It is also used for periodic low-priority events, such as
* idle-timers and recording error state.
*
* All tasks on the workqueue are expected to acquire the dev mutex
* so there is no point in running more than one instance of the
* workqueue at any time: max_active = 1 and NON_REENTRANT.
*/
dev_priv->wq = alloc_workqueue("i915",
WQ_UNBOUND | WQ_NON_REENTRANT,
1);
if (dev_priv->wq == NULL) {
DRM_ERROR("Failed to create our workqueue.\n");
ret = -ENOMEM;
goto out_mtrrfree;
}
/* enable GEM by default */
dev_priv->has_gem = 1;
intel_irq_init(dev);
/* Try to make sure MCHBAR is enabled before poking at it */
intel_setup_mchbar(dev);
intel_setup_gmbus(dev);
intel_opregion_setup(dev);
/* Make sure the bios did its job and set up vital registers */
intel_setup_bios(dev);
i915_gem_load(dev);
/* Init HWS */
if (!I915_NEED_GFX_HWS(dev)) {
ret = i915_init_phys_hws(dev);
if (ret)
goto out_gem_unload;
}
if (IS_PINEVIEW(dev))
i915_pineview_get_mem_freq(dev);
else if (IS_GEN5(dev))
i915_ironlake_get_mem_freq(dev);
/* On the 945G/GM, the chipset reports the MSI capability on the
* integrated graphics even though the support isn't actually there
* according to the published specs. It doesn't appear to function
* correctly in testing on 945G.
* This may be a side effect of MSI having been made available for PEG
* and the registers being closely associated.
*
* According to chipset errata, on the 965GM, MSI interrupts may
* be lost or delayed, but we use them anyways to avoid
* stuck interrupts on some machines.
*/
if (!IS_I945G(dev) && !IS_I945GM(dev))
pci_enable_msi(dev->pdev);
spin_lock_init(&dev_priv->gt_lock);
spin_lock_init(&dev_priv->irq_lock);
spin_lock_init(&dev_priv->error_lock);
spin_lock_init(&dev_priv->rps_lock);
if (IS_IVYBRIDGE(dev))
dev_priv->num_pipe = 3;
else if (IS_MOBILE(dev) || !IS_GEN2(dev))
dev_priv->num_pipe = 2;
else
dev_priv->num_pipe = 1;
ret = drm_vblank_init(dev, dev_priv->num_pipe);
if (ret)
goto out_gem_unload;
/* Start out suspended */
dev_priv->mm.suspended = 1;
intel_detect_pch(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
ret = i915_load_modeset_init(dev);
if (ret < 0) {
DRM_ERROR("failed to init modeset\n");
goto out_gem_unload;
}
}
/* Must be done after probing outputs */
intel_opregion_init(dev);
acpi_video_register();
setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
(unsigned long) dev);
spin_lock(&mchdev_lock);
i915_mch_dev = dev_priv;
dev_priv->mchdev_lock = &mchdev_lock;
spin_unlock(&mchdev_lock);
ips_ping_for_i915_load();
return 0;
out_gem_unload:
if (dev_priv->mm.inactive_shrinker.shrink)
unregister_shrinker(&dev_priv->mm.inactive_shrinker);
if (dev->pdev->msi_enabled)
pci_disable_msi(dev->pdev);
intel_teardown_gmbus(dev);
intel_teardown_mchbar(dev);
destroy_workqueue(dev_priv->wq);
out_mtrrfree:
if (dev_priv->mm.gtt_mtrr >= 0) {
mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base,
dev->agp->agp_info.aper_size * 1024 * 1024);
dev_priv->mm.gtt_mtrr = -1;
}
io_mapping_free(dev_priv->mm.gtt_mapping);
out_rmmap:
pci_iounmap(dev->pdev, dev_priv->regs);
put_bridge:
pci_dev_put(dev_priv->bridge_dev);
free_priv:
kfree(dev_priv);
return ret;
}
int i915_driver_unload(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
spin_lock(&mchdev_lock);
i915_mch_dev = NULL;
spin_unlock(&mchdev_lock);
if (dev_priv->mm.inactive_shrinker.shrink)
unregister_shrinker(&dev_priv->mm.inactive_shrinker);
mutex_lock(&dev->struct_mutex);
ret = i915_gpu_idle(dev, true);
if (ret)
DRM_ERROR("failed to idle hardware: %d\n", ret);
mutex_unlock(&dev->struct_mutex);
/* Cancel the retire work handler, which should be idle now. */
cancel_delayed_work_sync(&dev_priv->mm.retire_work);
io_mapping_free(dev_priv->mm.gtt_mapping);
if (dev_priv->mm.gtt_mtrr >= 0) {
mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base,
dev->agp->agp_info.aper_size * 1024 * 1024);
dev_priv->mm.gtt_mtrr = -1;
}
acpi_video_unregister();
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_fbdev_fini(dev);
intel_modeset_cleanup(dev);
/*
* free the memory space allocated for the child device
* config parsed from VBT
*/
if (dev_priv->child_dev && dev_priv->child_dev_num) {
kfree(dev_priv->child_dev);
dev_priv->child_dev = NULL;
dev_priv->child_dev_num = 0;
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
vga_switcheroo_unregister_client(dev->pdev);
vga_client_register(dev->pdev, NULL, NULL, NULL);
}
/* Free error state after interrupts are fully disabled. */
del_timer_sync(&dev_priv->hangcheck_timer);
cancel_work_sync(&dev_priv->error_work);
i915_destroy_error_state(dev);
if (dev->pdev->msi_enabled)
pci_disable_msi(dev->pdev);
intel_opregion_fini(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
/* Flush any outstanding unpin_work. */
flush_workqueue(dev_priv->wq);
mutex_lock(&dev->struct_mutex);
i915_gem_free_all_phys_object(dev);
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
i915_gem_cleanup_aliasing_ppgtt(dev);
if (I915_HAS_FBC(dev) && i915_powersave)
i915_cleanup_compression(dev);
drm_mm_takedown(&dev_priv->mm.stolen);
intel_cleanup_overlay(dev);
if (!I915_NEED_GFX_HWS(dev))
i915_free_hws(dev);
}
if (dev_priv->regs != NULL)
pci_iounmap(dev->pdev, dev_priv->regs);
intel_teardown_gmbus(dev);
intel_teardown_mchbar(dev);
destroy_workqueue(dev_priv->wq);
pci_dev_put(dev_priv->bridge_dev);
kfree(dev->dev_private);
return 0;
}
int i915_driver_open(struct drm_device *dev, struct drm_file *file)
{
struct drm_i915_file_private *file_priv;
DRM_DEBUG_DRIVER("\n");
file_priv = kmalloc(sizeof(*file_priv), GFP_KERNEL);
if (!file_priv)
return -ENOMEM;
file->driver_priv = file_priv;
spin_lock_init(&file_priv->mm.lock);
INIT_LIST_HEAD(&file_priv->mm.request_list);
return 0;
}
/**
* i915_driver_lastclose - clean up after all DRM clients have exited
* @dev: DRM device
*
* Take care of cleaning up after all DRM clients have exited. In the
* mode setting case, we want to restore the kernel's initial mode (just
* in case the last client left us in a bad state).
*
* Additionally, in the non-mode setting case, we'll tear down the AGP
* and DMA structures, since the kernel won't be using them, and clea
* up any GEM state.
*/
void i915_driver_lastclose(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
if (!dev_priv || drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_fb_restore_mode(dev);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
vga_switcheroo_process_delayed_switch();
return;
}
i915_gem_lastclose(dev);
i915_dma_cleanup(dev);
}
void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv)
{
i915_gem_release(dev, file_priv);
}
void i915_driver_postclose(struct drm_device *dev, struct drm_file *file)
{
struct drm_i915_file_private *file_priv = file->driver_priv;
kfree(file_priv);
}
struct drm_ioctl_desc i915_ioctls[] = {
DRM_IOCTL_DEF_DRV(I915_INIT, i915_dma_init, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_FLUSH, i915_flush_ioctl, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_FLIP, i915_flip_bufs, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_BATCHBUFFER, i915_batchbuffer, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_IRQ_EMIT, i915_irq_emit, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_IRQ_WAIT, i915_irq_wait, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_GETPARAM, i915_getparam, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_SETPARAM, i915_setparam, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_ALLOC, drm_noop, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_FREE, drm_noop, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, i915_cmdbuffer, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE, i915_vblank_pipe_set, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE, i915_vblank_pipe_get, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, i915_vblank_swap, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, i915_set_status_page, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_GEM_INIT, i915_gem_init_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_unpin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, i915_gem_entervt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, i915_gem_leavevt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_CREATE, i915_gem_create_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_SET_TILING, i915_gem_set_tiling, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_GET_TILING, i915_gem_get_tiling, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, intel_sprite_get_colorkey, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
};
int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
/**
* Determine if the device really is AGP or not.
*
* All Intel graphics chipsets are treated as AGP, even if they are really
* PCI-e.
*
* \param dev The device to be tested.
*
* \returns
* A value of 1 is always retured to indictate every i9x5 is AGP.
*/
int i915_driver_device_is_agp(struct drm_device * dev)
{
return 1;
}