linux/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c

687 lines
15 KiB
C
Raw Normal View History

omapfb: copy omapdss & displays for omapfb This patch makes a copy of the omapdss driver and the omap panel & encoder drivers for omapfb. The purpose is to separate omapdrm and omapfb drivers from each other. Note that this patch only does a direct copy of the files without any other modifications. The files are not yet used. The original files are in: drivers/video/fbdev/omap2/dss/ drivers/video/fbdev/omap2/displays-new/ Here's a more detailed explanation about this and the following patches, from the introduction mail of the patch series: A short background on the current status. We have the following entities: * omapdss, located in drivers/video/fbdev/omap2/dss/. This is a driver for the display subsystem IPs used on OMAP (and related) SoCs. It offers only a kernel internal API, and does not implement anything for fbdev or drm. * omapdss panels and encoders, located in drivers/video/fbdev/omap2/displays-new/. These are panel and external encoder drivers, which use APIs offered by omapdss driver. These also don't implement anything for fbdev or drm. * omapdrm, located in drivers/gpu/drm/omapdrm/. This is a drm driver, which uses omapdss and the panel/encoder drivers to operate the hardware. * omapfb, located in drivers/video/fbdev/omap2/omapfb/. This is an fbdev driver, which uses omapdss and the panel/encoder drivers to operate the hardware. * omap_vout, located in drivers/media/platform/omap/. This is a v4l2 driver, which uses omapdss and omapfb to implement a v4l2 API for the video overlays. So, on the top level, we have either omapdrm, or omapfb+omap_vout. Both of those use the same low level drivers. Without going to the historical details why the architecture is like that, I think it's finally time to change that. The situation with omapfb+omap_vout is that it still works, but no new features have been added for a long time, and I want to keep it working as it's still being used. At some point in the future I'd like to remove omapfb and omap_vout altogether. Omapdrm, on the other hand, is being actively developed. Sharing the low level parts with omapfb makes that development more difficult than it should be. It also "hides" half of the development, as everything happening in the low level parts resides under fbdev directory, not in the drm directory. I've been wanting to clean this up for a long time, but I haven't figured out a very good way to do it. I still haven't, but here's the best way I have come up with. This series makes a full copy of the low level parts, omapdss and panel/encoder drivers. Both omapfb+omap_vout and omapdrm will have their own versions. The copy omapfb+omap_vout get is a new copy, and the copy that omapdrm gets is just the current files moved. This way git will associate the omapdrm version with the old files. The omapfb+omap_vout versions won't be touched unless there are some big issues there. The omapdrm versions can be refactored and cleaned up, as the omapfb support code is no longer needed. We can perhaps also merge omapdss and omapdrm into the same kernel module. This series only does the copy, and the absolutely necessary parts. No further cleanups are done yet. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Dave Airlie <airlied@gmail.com> Acked-by: Rob Clark <robdclark@gmail.com>
2015-12-10 00:28:28 +08:00
/*
* TPO TD043MTEA1 Panel driver
*
* Author: Gražvydas Ignotas <notasas@gmail.com>
* Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/regulator/consumer.h>
#include <linux/gpio.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/of_gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
#define TPO_R02_MODE(x) ((x) & 7)
#define TPO_R02_MODE_800x480 7
#define TPO_R02_NCLK_RISING BIT(3)
#define TPO_R02_HSYNC_HIGH BIT(4)
#define TPO_R02_VSYNC_HIGH BIT(5)
#define TPO_R03_NSTANDBY BIT(0)
#define TPO_R03_EN_CP_CLK BIT(1)
#define TPO_R03_EN_VGL_PUMP BIT(2)
#define TPO_R03_EN_PWM BIT(3)
#define TPO_R03_DRIVING_CAP_100 BIT(4)
#define TPO_R03_EN_PRE_CHARGE BIT(6)
#define TPO_R03_SOFTWARE_CTL BIT(7)
#define TPO_R04_NFLIP_H BIT(0)
#define TPO_R04_NFLIP_V BIT(1)
#define TPO_R04_CP_CLK_FREQ_1H BIT(2)
#define TPO_R04_VGL_FREQ_1H BIT(4)
#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \
TPO_R03_EN_VGL_PUMP | TPO_R03_EN_PWM | \
TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
TPO_R03_SOFTWARE_CTL)
#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \
TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL)
static const u16 tpo_td043_def_gamma[12] = {
105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
};
struct panel_drv_data {
struct omap_dss_device dssdev;
struct omap_dss_device *in;
struct omap_video_timings videomode;
int data_lines;
struct spi_device *spi;
struct regulator *vcc_reg;
int nreset_gpio;
u16 gamma[12];
u32 mode;
u32 hmirror:1;
u32 vmirror:1;
u32 powered_on:1;
u32 spi_suspended:1;
u32 power_on_resume:1;
};
static const struct omap_video_timings tpo_td043_timings = {
.x_res = 800,
.y_res = 480,
.pixelclock = 36000000,
.hsw = 1,
.hfp = 68,
.hbp = 214,
.vsw = 1,
.vfp = 39,
.vbp = 34,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
};
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
{
struct spi_message m;
struct spi_transfer xfer;
u16 w;
int r;
spi_message_init(&m);
memset(&xfer, 0, sizeof(xfer));
w = ((u16)addr << 10) | (1 << 8) | data;
xfer.tx_buf = &w;
xfer.bits_per_word = 16;
xfer.len = 2;
spi_message_add_tail(&xfer, &m);
r = spi_sync(spi, &m);
if (r < 0)
dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r);
return r;
}
static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12])
{
u8 i, val;
/* gamma bits [9:8] */
for (val = i = 0; i < 4; i++)
val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
tpo_td043_write(spi, 0x11, val);
for (val = i = 0; i < 4; i++)
val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2);
tpo_td043_write(spi, 0x12, val);
for (val = i = 0; i < 4; i++)
val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2);
tpo_td043_write(spi, 0x13, val);
/* gamma bits [7:0] */
for (val = i = 0; i < 12; i++)
tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff);
}
static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v)
{
u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V |
TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
if (h)
reg4 &= ~TPO_R04_NFLIP_H;
if (v)
reg4 &= ~TPO_R04_NFLIP_V;
return tpo_td043_write(spi, 4, reg4);
}
static int tpo_td043_set_hmirror(struct omap_dss_device *dssdev, bool enable)
{
struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
ddata->hmirror = enable;
return tpo_td043_write_mirror(ddata->spi, ddata->hmirror,
ddata->vmirror);
}
static bool tpo_td043_get_hmirror(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
return ddata->hmirror;
}
static ssize_t tpo_td043_vmirror_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%d\n", ddata->vmirror);
}
static ssize_t tpo_td043_vmirror_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
int val;
int ret;
ret = kstrtoint(buf, 0, &val);
if (ret < 0)
return ret;
val = !!val;
ret = tpo_td043_write_mirror(ddata->spi, ddata->hmirror, val);
if (ret < 0)
return ret;
ddata->vmirror = val;
return count;
}
static ssize_t tpo_td043_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%d\n", ddata->mode);
}
static ssize_t tpo_td043_mode_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
long val;
int ret;
ret = kstrtol(buf, 0, &val);
if (ret != 0 || val & ~7)
return -EINVAL;
ddata->mode = val;
val |= TPO_R02_NCLK_RISING;
tpo_td043_write(ddata->spi, 2, val);
return count;
}
static ssize_t tpo_td043_gamma_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
ssize_t len = 0;
int ret;
int i;
for (i = 0; i < ARRAY_SIZE(ddata->gamma); i++) {
ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
ddata->gamma[i]);
if (ret < 0)
return ret;
len += ret;
}
buf[len - 1] = '\n';
return len;
}
static ssize_t tpo_td043_gamma_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
unsigned int g[12];
int ret;
int i;
ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
&g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
&g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
if (ret != 12)
return -EINVAL;
for (i = 0; i < 12; i++)
ddata->gamma[i] = g[i];
tpo_td043_write_gamma(ddata->spi, ddata->gamma);
return count;
}
static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR,
tpo_td043_vmirror_show, tpo_td043_vmirror_store);
static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
tpo_td043_mode_show, tpo_td043_mode_store);
static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR,
tpo_td043_gamma_show, tpo_td043_gamma_store);
static struct attribute *tpo_td043_attrs[] = {
&dev_attr_vmirror.attr,
&dev_attr_mode.attr,
&dev_attr_gamma.attr,
NULL,
};
static struct attribute_group tpo_td043_attr_group = {
.attrs = tpo_td043_attrs,
};
static int tpo_td043_power_on(struct panel_drv_data *ddata)
{
int r;
if (ddata->powered_on)
return 0;
r = regulator_enable(ddata->vcc_reg);
if (r != 0)
return r;
/* wait for panel to stabilize */
msleep(160);
if (gpio_is_valid(ddata->nreset_gpio))
gpio_set_value(ddata->nreset_gpio, 1);
tpo_td043_write(ddata->spi, 2,
TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING);
tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_NORMAL);
tpo_td043_write(ddata->spi, 0x20, 0xf0);
tpo_td043_write(ddata->spi, 0x21, 0xf0);
tpo_td043_write_mirror(ddata->spi, ddata->hmirror,
ddata->vmirror);
tpo_td043_write_gamma(ddata->spi, ddata->gamma);
ddata->powered_on = 1;
return 0;
}
static void tpo_td043_power_off(struct panel_drv_data *ddata)
{
if (!ddata->powered_on)
return;
tpo_td043_write(ddata->spi, 3,
TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
if (gpio_is_valid(ddata->nreset_gpio))
gpio_set_value(ddata->nreset_gpio, 0);
/* wait for at least 2 vsyncs before cutting off power */
msleep(50);
tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_STANDBY);
regulator_disable(ddata->vcc_reg);
ddata->powered_on = 0;
}
static int tpo_td043_connect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
if (omapdss_device_is_connected(dssdev))
return 0;
r = in->ops.dpi->connect(in, dssdev);
if (r)
return r;
return 0;
}
static void tpo_td043_disconnect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
if (!omapdss_device_is_connected(dssdev))
return;
in->ops.dpi->disconnect(in, dssdev);
}
static int tpo_td043_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
if (!omapdss_device_is_connected(dssdev))
return -ENODEV;
if (omapdss_device_is_enabled(dssdev))
return 0;
if (ddata->data_lines)
in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->videomode);
r = in->ops.dpi->enable(in);
if (r)
return r;
/*
* If we are resuming from system suspend, SPI clocks might not be
* enabled yet, so we'll program the LCD from SPI PM resume callback.
*/
if (!ddata->spi_suspended) {
r = tpo_td043_power_on(ddata);
if (r) {
in->ops.dpi->disable(in);
return r;
}
}
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void tpo_td043_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
if (!omapdss_device_is_enabled(dssdev))
return;
in->ops.dpi->disable(in);
if (!ddata->spi_suspended)
tpo_td043_power_off(ddata);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void tpo_td043_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
ddata->videomode = *timings;
dssdev->panel.timings = *timings;
in->ops.dpi->set_timings(in, timings);
}
static void tpo_td043_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
*timings = ddata->videomode;
}
static int tpo_td043_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
return in->ops.dpi->check_timings(in, timings);
}
static struct omap_dss_driver tpo_td043_ops = {
.connect = tpo_td043_connect,
.disconnect = tpo_td043_disconnect,
.enable = tpo_td043_enable,
.disable = tpo_td043_disable,
.set_timings = tpo_td043_set_timings,
.get_timings = tpo_td043_get_timings,
.check_timings = tpo_td043_check_timings,
.set_mirror = tpo_td043_set_hmirror,
.get_mirror = tpo_td043_get_hmirror,
.get_resolution = omapdss_default_get_resolution,
};
static int tpo_td043_probe_pdata(struct spi_device *spi)
{
const struct panel_tpo_td043mtea1_platform_data *pdata;
struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
struct omap_dss_device *dssdev, *in;
pdata = dev_get_platdata(&spi->dev);
ddata->nreset_gpio = pdata->nreset_gpio;
in = omap_dss_find_output(pdata->source);
if (in == NULL) {
dev_err(&spi->dev, "failed to find video source '%s'\n",
pdata->source);
return -EPROBE_DEFER;
}
ddata->in = in;
ddata->data_lines = pdata->data_lines;
dssdev = &ddata->dssdev;
dssdev->name = pdata->name;
return 0;
}
static int tpo_td043_probe_of(struct spi_device *spi)
{
struct device_node *node = spi->dev.of_node;
struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
struct omap_dss_device *in;
int gpio;
gpio = of_get_named_gpio(node, "reset-gpios", 0);
if (!gpio_is_valid(gpio)) {
dev_err(&spi->dev, "failed to parse enable gpio\n");
return gpio;
}
ddata->nreset_gpio = gpio;
in = omapdss_of_find_source_for_first_ep(node);
if (IS_ERR(in)) {
dev_err(&spi->dev, "failed to find video source\n");
return PTR_ERR(in);
}
ddata->in = in;
return 0;
}
static int tpo_td043_probe(struct spi_device *spi)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
int r;
dev_dbg(&spi->dev, "%s\n", __func__);
spi->bits_per_word = 16;
spi->mode = SPI_MODE_0;
r = spi_setup(spi);
if (r < 0) {
dev_err(&spi->dev, "spi_setup failed: %d\n", r);
return r;
}
ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
if (ddata == NULL)
return -ENOMEM;
dev_set_drvdata(&spi->dev, ddata);
ddata->spi = spi;
if (dev_get_platdata(&spi->dev)) {
r = tpo_td043_probe_pdata(spi);
if (r)
return r;
} else if (spi->dev.of_node) {
r = tpo_td043_probe_of(spi);
if (r)
return r;
} else {
return -ENODEV;
}
ddata->mode = TPO_R02_MODE_800x480;
memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma));
ddata->vcc_reg = devm_regulator_get(&spi->dev, "vcc");
if (IS_ERR(ddata->vcc_reg)) {
dev_err(&spi->dev, "failed to get LCD VCC regulator\n");
r = PTR_ERR(ddata->vcc_reg);
goto err_regulator;
}
if (gpio_is_valid(ddata->nreset_gpio)) {
r = devm_gpio_request_one(&spi->dev,
ddata->nreset_gpio, GPIOF_OUT_INIT_LOW,
"lcd reset");
if (r < 0) {
dev_err(&spi->dev, "couldn't request reset GPIO\n");
goto err_gpio_req;
}
}
r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group);
if (r) {
dev_err(&spi->dev, "failed to create sysfs files\n");
goto err_sysfs;
}
ddata->videomode = tpo_td043_timings;
dssdev = &ddata->dssdev;
dssdev->dev = &spi->dev;
dssdev->driver = &tpo_td043_ops;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->panel.timings = ddata->videomode;
r = omapdss_register_display(dssdev);
if (r) {
dev_err(&spi->dev, "Failed to register panel\n");
goto err_reg;
}
return 0;
err_reg:
sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
err_sysfs:
err_gpio_req:
err_regulator:
omap_dss_put_device(ddata->in);
return r;
}
static int tpo_td043_remove(struct spi_device *spi)
{
struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
struct omap_dss_device *dssdev = &ddata->dssdev;
struct omap_dss_device *in = ddata->in;
dev_dbg(&ddata->spi->dev, "%s\n", __func__);
omapdss_unregister_display(dssdev);
tpo_td043_disable(dssdev);
tpo_td043_disconnect(dssdev);
omap_dss_put_device(in);
sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int tpo_td043_spi_suspend(struct device *dev)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", ddata);
ddata->power_on_resume = ddata->powered_on;
tpo_td043_power_off(ddata);
ddata->spi_suspended = 1;
return 0;
}
static int tpo_td043_spi_resume(struct device *dev)
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
int ret;
dev_dbg(dev, "tpo_td043_spi_resume\n");
if (ddata->power_on_resume) {
ret = tpo_td043_power_on(ddata);
if (ret)
return ret;
}
ddata->spi_suspended = 0;
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm,
tpo_td043_spi_suspend, tpo_td043_spi_resume);
static const struct of_device_id tpo_td043_of_match[] = {
{ .compatible = "omapdss,tpo,td043mtea1", },
{},
};
MODULE_DEVICE_TABLE(of, tpo_td043_of_match);
static struct spi_driver tpo_td043_spi_driver = {
.driver = {
.name = "panel-tpo-td043mtea1",
.pm = &tpo_td043_spi_pm,
.of_match_table = tpo_td043_of_match,
.suppress_bind_attrs = true,
},
.probe = tpo_td043_probe,
.remove = tpo_td043_remove,
};
module_spi_driver(tpo_td043_spi_driver);
MODULE_ALIAS("spi:tpo,td043mtea1");
MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
MODULE_LICENSE("GPL");