openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/powerpc/kvm/booke_emulate.c

268 lines
6.7 KiB
C
Raw Normal View History

KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
* Copyright IBM Corp. 2008
*
* Authors: Hollis Blanchard <hollisb@us.ibm.com>
*/
#include <linux/kvm_host.h>
#include <asm/disassemble.h>
#include "booke.h"
#define OP_19_XOP_RFI 50
#define OP_31_XOP_MFMSR 83
#define OP_31_XOP_WRTEE 131
#define OP_31_XOP_MTMSR 146
#define OP_31_XOP_WRTEEI 163
static void kvmppc_emul_rfi(struct kvm_vcpu *vcpu)
{
vcpu->arch.pc = vcpu->arch.srr0;
kvmppc_set_msr(vcpu, vcpu->arch.srr1);
}
int kvmppc_booke_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
unsigned int inst, int *advance)
{
int emulated = EMULATE_DONE;
int rs;
int rt;
switch (get_op(inst)) {
case 19:
switch (get_xop(inst)) {
case OP_19_XOP_RFI:
kvmppc_emul_rfi(vcpu);
kvmppc_set_exit_type(vcpu, EMULATED_RFI_EXITS);
*advance = 0;
break;
default:
emulated = EMULATE_FAIL;
break;
}
break;
case 31:
switch (get_xop(inst)) {
case OP_31_XOP_MFMSR:
rt = get_rt(inst);
KVM: PPC: Convert MSR to shared page One of the most obvious registers to share with the guest directly is the MSR. The MSR contains the "interrupts enabled" flag which the guest has to toggle in critical sections. So in order to bring the overhead of interrupt en- and disabling down, let's put msr into the shared page. Keep in mind that even though you can fully read its contents, writing to it doesn't always update all state. There are a few safe fields that don't require hypervisor interaction. See the documentation for a list of MSR bits that are safe to be set from inside the guest. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-07-29 20:47:43 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.shared->msr);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
kvmppc_set_exit_type(vcpu, EMULATED_MFMSR_EXITS);
break;
case OP_31_XOP_MTMSR:
rs = get_rs(inst);
kvmppc_set_exit_type(vcpu, EMULATED_MTMSR_EXITS);
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_msr(vcpu, kvmppc_get_gpr(vcpu, rs));
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case OP_31_XOP_WRTEE:
rs = get_rs(inst);
KVM: PPC: Convert MSR to shared page One of the most obvious registers to share with the guest directly is the MSR. The MSR contains the "interrupts enabled" flag which the guest has to toggle in critical sections. So in order to bring the overhead of interrupt en- and disabling down, let's put msr into the shared page. Keep in mind that even though you can fully read its contents, writing to it doesn't always update all state. There are a few safe fields that don't require hypervisor interaction. See the documentation for a list of MSR bits that are safe to be set from inside the guest. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-07-29 20:47:43 +08:00
vcpu->arch.shared->msr = (vcpu->arch.shared->msr & ~MSR_EE)
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
| (kvmppc_get_gpr(vcpu, rs) & MSR_EE);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
kvmppc_set_exit_type(vcpu, EMULATED_WRTEE_EXITS);
break;
case OP_31_XOP_WRTEEI:
KVM: PPC: Convert MSR to shared page One of the most obvious registers to share with the guest directly is the MSR. The MSR contains the "interrupts enabled" flag which the guest has to toggle in critical sections. So in order to bring the overhead of interrupt en- and disabling down, let's put msr into the shared page. Keep in mind that even though you can fully read its contents, writing to it doesn't always update all state. There are a few safe fields that don't require hypervisor interaction. See the documentation for a list of MSR bits that are safe to be set from inside the guest. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-07-29 20:47:43 +08:00
vcpu->arch.shared->msr = (vcpu->arch.shared->msr & ~MSR_EE)
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
| (inst & MSR_EE);
kvmppc_set_exit_type(vcpu, EMULATED_WRTEE_EXITS);
break;
default:
emulated = EMULATE_FAIL;
}
break;
default:
emulated = EMULATE_FAIL;
}
return emulated;
}
int kvmppc_booke_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
{
int emulated = EMULATE_DONE;
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
ulong spr_val = kvmppc_get_gpr(vcpu, rs);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
switch (sprn) {
case SPRN_DEAR:
KVM: PPC: Convert DAR to shared page. The DAR register contains the address a data page fault occured at. This register behaves pretty much like a simple data storage register that gets written to on data faults. There is no hypervisor interaction required on read or write. This patch converts all users of the current field to the shared page. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-07-29 20:47:45 +08:00
vcpu->arch.shared->dar = spr_val; break;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
case SPRN_ESR:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.esr = spr_val; break;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
case SPRN_DBCR0:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.dbcr0 = spr_val; break;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
case SPRN_DBCR1:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.dbcr1 = spr_val; break;
KVM: ppc: Add dbsr in kvm_vcpu_arch Kernel for E500 need clear dbsr when startup. So add dbsr register in kvm_vcpu_arch for BOOKE. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:07 +08:00
case SPRN_DBSR:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.dbsr &= ~spr_val; break;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
case SPRN_TSR:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.tsr &= ~spr_val; break;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
case SPRN_TCR:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.tcr = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
kvmppc_emulate_dec(vcpu);
break;
/* Note: SPRG4-7 are user-readable. These values are
* loaded into the real SPRGs when resuming the
* guest. */
case SPRN_SPRG4:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.sprg4 = spr_val; break;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
case SPRN_SPRG5:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.sprg5 = spr_val; break;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
case SPRN_SPRG6:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.sprg6 = spr_val; break;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
case SPRN_SPRG7:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.sprg7 = spr_val; break;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
case SPRN_IVPR:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivpr = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR0:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivor[BOOKE_IRQPRIO_CRITICAL] = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR1:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivor[BOOKE_IRQPRIO_MACHINE_CHECK] = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR2:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivor[BOOKE_IRQPRIO_DATA_STORAGE] = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR3:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivor[BOOKE_IRQPRIO_INST_STORAGE] = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR4:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivor[BOOKE_IRQPRIO_EXTERNAL] = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR5:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivor[BOOKE_IRQPRIO_ALIGNMENT] = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR6:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivor[BOOKE_IRQPRIO_PROGRAM] = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR7:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivor[BOOKE_IRQPRIO_FP_UNAVAIL] = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR8:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivor[BOOKE_IRQPRIO_SYSCALL] = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR9:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivor[BOOKE_IRQPRIO_AP_UNAVAIL] = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR10:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivor[BOOKE_IRQPRIO_DECREMENTER] = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR11:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivor[BOOKE_IRQPRIO_FIT] = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR12:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivor[BOOKE_IRQPRIO_WATCHDOG] = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR13:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivor[BOOKE_IRQPRIO_DTLB_MISS] = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR14:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivor[BOOKE_IRQPRIO_ITLB_MISS] = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR15:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
vcpu->arch.ivor[BOOKE_IRQPRIO_DEBUG] = spr_val;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
default:
emulated = EMULATE_FAIL;
}
return emulated;
}
int kvmppc_booke_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
{
int emulated = EMULATE_DONE;
switch (sprn) {
case SPRN_IVPR:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivpr); break;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
case SPRN_DEAR:
KVM: PPC: Convert DAR to shared page. The DAR register contains the address a data page fault occured at. This register behaves pretty much like a simple data storage register that gets written to on data faults. There is no hypervisor interaction required on read or write. This patch converts all users of the current field to the shared page. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-07-29 20:47:45 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.shared->dar); break;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
case SPRN_ESR:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.esr); break;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
case SPRN_DBCR0:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.dbcr0); break;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
case SPRN_DBCR1:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.dbcr1); break;
KVM: ppc: Add dbsr in kvm_vcpu_arch Kernel for E500 need clear dbsr when startup. So add dbsr register in kvm_vcpu_arch for BOOKE. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:07 +08:00
case SPRN_DBSR:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.dbsr); break;
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
case SPRN_IVOR0:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_CRITICAL]);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR1:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_MACHINE_CHECK]);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR2:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_DATA_STORAGE]);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR3:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_INST_STORAGE]);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR4:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_EXTERNAL]);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR5:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_ALIGNMENT]);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR6:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_PROGRAM]);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR7:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_FP_UNAVAIL]);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR8:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_SYSCALL]);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR9:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_AP_UNAVAIL]);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR10:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_DECREMENTER]);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR11:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_FIT]);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR12:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_WATCHDOG]);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR13:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_DTLB_MISS]);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR14:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_ITLB_MISS]);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
case SPRN_IVOR15:
KVM: PPC: Use accessor functions for GPR access All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-08 09:58:01 +08:00
kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_DEBUG]);
KVM: ppc: split out common Book E instruction emulation The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-01-04 06:23:06 +08:00
break;
default:
emulated = EMULATE_FAIL;
}
return emulated;
}